diff options
Diffstat (limited to 'configure')
-rwxr-xr-x | configure | 118 |
1 files changed, 72 insertions, 46 deletions
@@ -654,6 +654,7 @@ target_alias INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA +am__isrc CYGPATH_W PACKAGE VERSION @@ -1734,7 +1735,8 @@ VERSION=1.0.6 ac_config_headers="$ac_config_headers config.h" -am__api_version="1.9" +am__api_version='1.10' + ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then @@ -1917,38 +1919,53 @@ else echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' +{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" else - mkdir_p='$(install_sh) -d' + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" fi fi +{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +echo "${ECHO_T}$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac for ac_prog in gawk mawk nawk awk do @@ -2031,12 +2048,16 @@ else fi rmdir .tst 2>/dev/null -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } + fi fi # test whether we have cygpath @@ -2079,7 +2100,7 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"$am_aux_dir/install-sh"} +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right @@ -2183,7 +2204,7 @@ else fi fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -3169,9 +3190,7 @@ if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi - - -if test "x$enable_dependency_tracking" != xno; then + if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else @@ -3181,7 +3200,6 @@ fi - depcc="$CC" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 @@ -3249,6 +3267,7 @@ else depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then @@ -3278,9 +3297,7 @@ fi echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -7106,6 +7123,7 @@ gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -7315,6 +7333,7 @@ target_alias!$target_alias$ac_delim INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim INSTALL_DATA!$INSTALL_DATA$ac_delim +am__isrc!$am__isrc$ac_delim CYGPATH_W!$CYGPATH_W$ac_delim PACKAGE!$PACKAGE$ac_delim VERSION!$VERSION$ac_delim @@ -7362,7 +7381,7 @@ GTKGLEXT_LIBS!$GTKGLEXT_LIBS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 85; then + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 86; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 @@ -7589,6 +7608,11 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -7642,6 +7666,7 @@ s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out @@ -7806,8 +7831,9 @@ echo "$as_me: executing $ac_file commands" >&6;} # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ |