Merge branch 'pxa' into devel

66 files changed, 7135 insertions, 519 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fcd1d8f95a2..0a0c88d0039 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -339,14 +339,14 @@ config ARCH_PNX4008
 	  This enables support for Philips PNX4008 mobile platform.
 
 config ARCH_PXA
-	bool "PXA2xx-based"
+	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Intel's PXA2XX processor line.
+	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -489,7 +489,7 @@ source arch/arm/mm/Kconfig
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3
-	default y if PXA27x
+	default y if PXA27x || PXA3xx
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 236bbe57831..67ea99ef652 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@ __XScale_start:
 		bic	r0, r0, #0x1000		@ clear Icache
 		mcr	p15, 0, r0, c1, c0, 0
 
-#ifdef CONFIG_ARCH_LUBBOCK
-		mov	r7, #MACH_TYPE_LUBBOCK
-#endif
-
 #ifdef CONFIG_ARCH_COTULLA_IDP
 		mov	r7, #MACH_TYPE_COTULLA_IDP
 #endif
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e1289a256ce..3d0b9fa42f8 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
+obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
new file mode 100644
index 00000000000..c03de9bfd76
--- /dev/null
+++ b/arch/arm/common/it8152.c
@@ -0,0 +1,387 @@
+/*
+ * linux/arch/arm/common/it8152.c
+ *
+ * Copyright Compulab Ltd, 2002-2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c
+ * (see this file for respective copyrights)
+ *
+ * Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation
+ * and demux code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/mach/pci.h>
+#include <asm/hardware/it8152.h>
+
+#define MAX_SLOTS		21
+
+static void it8152_mask_irq(unsigned int irq)
+{
+       if (irq >= IT8152_LD_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) |
+			    (1 << (irq - IT8152_LD_IRQ(0)))),
+			    IT8152_INTC_LDCNIMR);
+       } else if (irq >= IT8152_LP_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) |
+			    (1 << (irq - IT8152_LP_IRQ(0)))),
+			    IT8152_INTC_LPCNIMR);
+       } else if (irq >= IT8152_PD_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) |
+			    (1 << (irq - IT8152_PD_IRQ(0)))),
+			    IT8152_INTC_PDCNIMR);
+       }
+}
+
+static void it8152_unmask_irq(unsigned int irq)
+{
+       if (irq >= IT8152_LD_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) &
+			     ~(1 << (irq - IT8152_LD_IRQ(0)))),
+			    IT8152_INTC_LDCNIMR);
+       } else if (irq >= IT8152_LP_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) &
+			     ~(1 << (irq - IT8152_LP_IRQ(0)))),
+			    IT8152_INTC_LPCNIMR);
+       } else if (irq >= IT8152_PD_IRQ(0)) {
+	       __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) &
+			     ~(1 << (irq - IT8152_PD_IRQ(0)))),
+			    IT8152_INTC_PDCNIMR);
+       }
+}
+
+static inline void it8152_irq(int irq)
+{
+	struct irq_desc *desc;
+
+	printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq);
+
+	desc = irq_desc + irq;
+	desc_handle_irq(irq, desc);
+}
+
+static struct irq_chip it8152_irq_chip = {
+	.name		= "it8152",
+	.ack		= it8152_mask_irq,
+	.mask		= it8152_mask_irq,
+	.unmask		= it8152_unmask_irq,
+};
+
+void it8152_init_irq(void)
+{
+	int irq;
+
+	__raw_writel((0xffff), IT8152_INTC_PDCNIMR);
+	__raw_writel((0), IT8152_INTC_PDCNIRR);
+	__raw_writel((0xffff), IT8152_INTC_LPCNIMR);
+	__raw_writel((0), IT8152_INTC_LPCNIRR);
+	__raw_writel((0xffff), IT8152_INTC_LDCNIMR);
+	__raw_writel((0), IT8152_INTC_LDCNIRR);
+
+	for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
+		set_irq_chip(irq, &it8152_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+       int bits_pd, bits_lp, bits_ld;
+       int i;
+
+       printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq);
+
+       while (1) {
+	       /* Read all */
+	       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
+	       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+	       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
+
+	       /* Ack */
+	       __raw_writel((~bits_pd), IT8152_INTC_PDCNIRR);
+	       __raw_writel((~bits_lp), IT8152_INTC_LPCNIRR);
+	       __raw_writel((~bits_ld), IT8152_INTC_LDCNIRR);
+
+	       if (!(bits_ld | bits_lp | bits_pd)) {
+		       /* Re-read to guarantee, that there was a moment of
+			  time, when they all three were 0. */
+		       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
+		       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+		       if (!(bits_ld | bits_lp | bits_pd))
+			       return;
+	       }
+
+	       bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
+	       while (bits_pd) {
+		       i = __ffs(bits_pd);
+		       it8152_irq(IT8152_PD_IRQ(i));
+		       bits_pd &= ~(1 << i);
+	       }
+
+	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
+	       while (bits_lp) {
+		       i = __ffs(bits_pd);
+		       it8152_irq(IT8152_LP_IRQ(i));
+		       bits_lp &= ~(1 << i);
+	       }
+
+	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
+	       while (bits_ld) {
+		       i = __ffs(bits_pd);
+		       it8152_irq(IT8152_LD_IRQ(i));
+		       bits_ld &= ~(1 << i);
+	       }
+       }
+}
+
+/* mapping for on-chip devices */
+int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
+	    (dev->device == PCI_DEVICE_ID_ITE_8152)) {
+		if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO)
+			return IT8152_AUDIO_INT;
+		if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)
+			return IT8152_USB_INT;
+		if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA)
+			return IT8152_CDMA_INT;
+	}
+
+	return 0;
+}
+
+static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus,
+						 unsigned int devfn)
+{
+	unsigned long addr = 0;
+
+	if (bus->number == 0) {
+			if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
+				addr = (devfn << 8);
+	} else
+		addr = (bus->number << 16) | (devfn << 8);
+
+	return addr;
+}
+
+static int it8152_pci_read_config(struct pci_bus *bus,
+				  unsigned int devfn, int where,
+				  int size, u32 *value)
+{
+	unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
+	u32 v;
+	int shift;
+
+	shift = (where & 3);
+
+	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
+	v = (__raw_readl(IT8152_PCI_CFG_DATA)  >> (8 * (shift)));
+
+	*value = v;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int it8152_pci_write_config(struct pci_bus *bus,
+				   unsigned int devfn, int where,
+				   int size, u32 value)
+{
+	unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
+	u32 v, vtemp, mask = 0;
+	int shift;
+
+	if (size == 1)
+		mask = 0xff;
+	if (size == 2)
+		mask = 0xffff;
+
+	shift = (where & 3);
+
+	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
+	vtemp = __raw_readl(IT8152_PCI_CFG_DATA);
+
+	if (mask)
+		vtemp &= ~(mask << (8 * shift));
+	else
+		vtemp = 0;
+
+	v = (value << (8 * shift));
+	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
+	__raw_writel((v | vtemp), IT8152_PCI_CFG_DATA);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops it8152_ops = {
+	.read = it8152_pci_read_config,
+	.write = it8152_pci_write_config,
+};
+
+static struct resource it8152_io = {
+	.name	= "IT8152 PCI I/O region",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource it8152_mem = {
+	.name	= "IT8152 PCI memory region",
+	.start	= 0x10000000,
+	.end	= 0x13e00000,
+	.flags	= IORESOURCE_MEM,
+};
+
+/*
+ * The following functions are needed for DMA bouncing.
+ * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * connected to ITE8152 (PCI and USB) should have limited DMA window
+ */
+
+/*
+ * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
+ * other devices.
+ */
+static int it8152_pci_platform_notify(struct device *dev)
+{
+	if (dev->bus == &pci_bus_type) {
+		if (dev->dma_mask)
+			*dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
+		dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
+		dmabounce_register_dev(dev, 2048, 4096);
+	}
+	return 0;
+}
+
+static int it8152_pci_platform_notify_remove(struct device *dev)
+{
+	if (dev->bus == &pci_bus_type)
+		dmabounce_unregister_dev(dev);
+
+	return 0;
+}
+
+int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
+		__FUNCTION__, dma_addr, size);
+	return (dev->bus == &pci_bus_type) &&
+		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
+}
+
+/*
+ * We override these so we properly do dmabounce otherwise drivers
+ * are able to set the dma_mask to 0xffffffff and we can no longer
+ * trap bounces. :(
+ *
+ * We just return true on everyhing except for < 64MB in which case
+ * we will fail miseralby and die since we can't handle that case.
+ */
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	printk(KERN_DEBUG "%s: %s %llx\n",
+	       __FUNCTION__, dev->dev.bus_id, mask);
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
+int
+pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	printk(KERN_DEBUG "%s: %s %llx\n",
+	       __FUNCTION__, dev->dev.bus_id, mask);
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
+int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	it8152_io.start = IT8152_IO_BASE + 0x12000;
+	it8152_io.end	= IT8152_IO_BASE + 0x12000 + 0x100000;
+
+	sys->mem_offset = 0x10000000;
+	sys->io_offset  = IT8152_IO_BASE;
+
+	if (request_resource(&ioport_resource, &it8152_io)) {
+		printk(KERN_ERR "PCI: unable to allocate IO region\n");
+		goto err0;
+	}
+	if (request_resource(&iomem_resource, &it8152_mem)) {
+		printk(KERN_ERR "PCI: unable to allocate memory region\n");
+		goto err1;
+	}
+
+	sys->resource[0] = &it8152_io;
+	sys->resource[1] = &it8152_mem;
+
+	if (platform_notify || platform_notify_remove) {
+		printk(KERN_ERR "PCI: Can't use platform_notify\n");
+		goto err2;
+	}
+
+	platform_notify = it8152_pci_platform_notify;
+	platform_notify_remove = it8152_pci_platform_notify_remove;
+
+	return 1;
+
+err2:
+	release_resource(&it8152_io);
+err1:
+	release_resource(&it8152_mem);
+err0:
+	return -EBUSY;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as we don't have even crappy BIOSes to set it properly.
+ * The implementation is from arch/i386/pci/i386.c
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+
+	/* no need to update on-chip OHCI controller */
+	if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
+	    (dev->device == PCI_DEVICE_ID_ITE_8152) &&
+	    ((dev->class >> 8) == PCI_CLASS_SERIAL_USB))
+		return;
+
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	if (lat < 16)
+		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+	else if (lat > pcibios_max_latency)
+		lat = pcibios_max_latency;
+	else
+		return;
+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
+	       pci_name(dev), lat);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+
+struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(nr, &it8152_ops, sys);
+}
+
diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig
new file mode 100644
index 00000000000..5cab08397ae
--- /dev/null
+++ b/arch/arm/configs/cm_x270_defconfig
@@ -0,0 +1,1410 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22
+# Wed Jul 18 14:11:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_DMABOUNCE=y
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_ARMCORE=y
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_HOST_ITE8152=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_CM_X270=m
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=12000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_CM_X270=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_FB_MBX=m
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index a2dd930d11e..e5747547b44 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -279,6 +279,25 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
 
+static void __init pci_fixup_it8152(struct pci_dev *dev)
+{
+	int i;
+	/* fixup for ITE 8152 devices */
+	/* FIXME: add defines for class 0x68000 and 0x80103 */
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
+	    dev->class == 0x68000 ||
+	    dev->class == 0x80103) {
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
+
+
+
 void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 	if (debug_pci)
@@ -292,9 +311,12 @@ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
  */
 static inline int pdev_bad_for_parity(struct pci_dev *dev)
 {
-	return (dev->vendor == PCI_VENDOR_ID_INTERG &&
-		(dev->device == PCI_DEVICE_ID_INTERG_2000 ||
-		 dev->device == PCI_DEVICE_ID_INTERG_2010));
+	return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
+		 (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
+		  dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
+		(dev->vendor == PCI_VENDOR_ID_ITE &&
+		 dev->device == PCI_DEVICE_ID_ITE_8152));
+
 }
 
 /*
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5ebec6d88b5..656d49661a2 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -1,6 +1,24 @@
 if ARCH_PXA
 
-menu "Intel PXA2xx Implementations"
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+if PXA3xx
+
+menu "Supported PXA3xx Processor Variants"
+
+config CPU_PXA300
+	bool "PXA300 (codename Monahans-L)"
+
+config CPU_PXA310
+	bool "PXA310 (codename Monahans-LV)"
+	select CPU_PXA300
+
+config CPU_PXA320
+	bool "PXA320 (codename Monahans-P)"
+
+endmenu
+
+endif
 
 choice
 	prompt "Select target board"
@@ -41,6 +59,15 @@ config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
 
+config MACH_ZYLONITE
+	bool "PXA3xx Development Platform"
+	select PXA3xx
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X270 modules"
+	select PXA27x
+	select IWMMXT
+
 endchoice
 
 if PXA_SHARPSL
@@ -130,6 +157,11 @@ config PXA27x
 	help
 	  Select code specific to PXA27x variants
 
+config PXA3xx
+	bool
+	help
+	  Select code specific to PXA3xx variants
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 7d6ab5c59ab..4263527e512 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,36 +3,51 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y += clock.o generic.o irq.o dma.o time.o
-obj-$(CONFIG_PXA25x) += pxa25x.o
-obj-$(CONFIG_PXA27x) += pxa27x.o
+obj-y				+= clock.o generic.o irq.o dma.o time.o
+obj-$(CONFIG_PXA25x)		+= pxa25x.o
+obj-$(CONFIG_PXA27x)		+= pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o
+obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
+obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
-obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
-obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
-obj-$(CONFIG_MACH_TOSA)         += tosa.o
-obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_TOSA)		+= tosa.o
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+
+ifeq ($(CONFIG_MACH_ZYLONITE),y)
+  obj-y				+= zylonite.o
+  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
+  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
+endif
+
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 
 # Support for blinky lights
 led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
+led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
+led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
+led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
-obj-$(CONFIG_LEDS) += $(led-y)
+obj-$(CONFIG_LEDS)		+= $(led-y)
 
 # Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_PXA_SSP) += ssp.o
+obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
 
 ifeq ($(CONFIG_PXA27x),y)
-obj-$(CONFIG_PM) += standby.o
+obj-$(CONFIG_PM)		+= standby.o
+endif
+
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 34a31caa6f9..83ef5ecaf43 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -9,19 +9,15 @@
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/hardware.h>
 
-struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	struct module		*owner;
-	const char		*name;
-	unsigned int		enabled;
-	void			(*enable)(void);
-	void			(*disable)(void);
-};
+#include "devices.h"
+#include "generic.h"
+#include "clock.h"
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -33,7 +29,8 @@ struct clk *clk_get(struct device *dev, const char *id)
 
 	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+		if (strcmp(id, p->name) == 0 &&
+		    (p->dev == NULL || p->dev == dev)) {
 			clk = p;
 			break;
 		}
@@ -46,7 +43,6 @@ EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
 {
-	module_put(clk->owner);
 }
 EXPORT_SYMBOL(clk_put);
 
@@ -56,8 +52,12 @@ int clk_enable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (clk->enabled++ == 0)
-		clk->enable();
+		clk->ops->enable(clk);
 	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	if (clk->delay)
+		udelay(clk->delay);
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -70,54 +70,75 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (--clk->enabled == 0)
-		clk->disable();
+		clk->ops->disable(clk);
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return clk->rate;
+	unsigned long rate;
+
+	rate = clk->rate;
+	if (clk->ops->getrate)
+		rate = clk->ops->getrate(clk);
+
+	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(void)
+static void clk_gpio27_enable(struct clk *clk)
 {
 	pxa_gpio_mode(GPIO11_3_6MHz_MD);
 }
 
-static void clk_gpio27_disable(void)
+static void clk_gpio27_disable(struct clk *clk)
 {
 }
 
-static struct clk clk_gpio27 = {
-	.name		= "GPIO27_CLK",
-	.rate		= 3686400,
+static const struct clkops clk_gpio27_ops = {
 	.enable		= clk_gpio27_enable,
 	.disable	= clk_gpio27_disable,
 };
 
-int clk_register(struct clk *clk)
+
+void clk_cken_enable(struct clk *clk)
 {
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
+	CKEN |= 1 << clk->cken;
 }
-EXPORT_SYMBOL(clk_register);
 
-void clk_unregister(struct clk *clk)
+void clk_cken_disable(struct clk *clk)
 {
+	CKEN &= ~(1 << clk->cken);
+}
+
+const struct clkops clk_cken_ops = {
+	.enable		= clk_cken_enable,
+	.disable	= clk_cken_disable,
+};
+
+static struct clk common_clks[] = {
+	{
+		.name		= "GPIO27_CLK",
+		.ops		= &clk_gpio27_ops,
+		.rate		= 3686400,
+	},
+};
+
+void clks_register(struct clk *clks, size_t num)
+{
+	int i;
+
 	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
+	for (i = 0; i < num; i++)
+		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
-EXPORT_SYMBOL(clk_unregister);
 
 static int __init clk_init(void)
 {
-	clk_register(&clk_gpio27);
+	clks_register(common_clks, ARRAY_SIZE(common_clks));
 	return 0;
 }
 arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
new file mode 100644
index 00000000000..bc6b77e1592
--- /dev/null
+++ b/arch/arm/mach-pxa/clock.h
@@ -0,0 +1,43 @@
+struct clk;
+
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	unsigned long		(*getrate)(struct clk *);
+};
+
+struct clk {
+	struct list_head	node;
+	const char		*name;
+	struct device		*dev;
+	const struct clkops	*ops;
+	unsigned long		rate;
+	unsigned int		cken;
+	unsigned int		delay;
+	unsigned int		enabled;
+};
+
+#define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define INIT_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_cken_ops;
+
+void clk_cken_enable(struct clk *clk);
+void clk_cken_disable(struct clk *clk);
+
+void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
new file mode 100644
index 00000000000..878d3b9b863
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ *
+ * Copyright (C) 2007 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/arch/cm-x270.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/it8152.h>
+
+unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+	unsigned long *zhole_size)
+{
+	unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+	printk(KERN_INFO "Adjusting zones for CM-x270\n");
+
+	/*
+	 * Only adjust if > 64M on current system
+	 */
+	if (node || (zone_size[0] <= sz))
+		return;
+
+	zone_size[1] = zone_size[0] - sz;
+	zone_size[0] = sz;
+	zhole_size[1] = zhole_size[0];
+	zhole_size[0] = 0;
+}
+
+static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	/* clear our parent irq */
+	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+
+	it8152_irq_demux(irq, desc);
+}
+
+void __cmx270_pci_init_irq(void)
+{
+	it8152_init_irq();
+	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
+	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
+
+	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
+				cmx270_it8152_irq_demux);
+}
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_ite[10];
+
+void __cmx270_pci_suspend(void)
+{
+	/* save ITE state */
+	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
+	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
+	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
+
+	/* Clear ITE IRQ's */
+	__raw_writel((0), IT8152_INTC_PDCNIRR);
+	__raw_writel((0), IT8152_INTC_LPCNIRR);
+}
+
+void __cmx270_pci_resume(void)
+{
+	/* restore IT8152 state */
+	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
+	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
+	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
+}
+#else
+void cmx270_pci_suspend(void) {}
+void cmx270_pci_resume(void) {}
+#endif
+
+/* PCI IRQ mapping*/
+static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__,
+	       pci_name(dev), slot, pin);
+
+	irq = it8152_pci_map_irq(dev, slot, pin);
+	if (irq)
+		return irq;
+
+	/*
+	  Here comes the ugly part. The routing is baseboard specific,
+	  but defining a platform for each possible base of CM-x270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	*/
+	/* ATXBASE PCI slot */
+	if (slot == 7)
+		return IT8152_PCI_INTA;
+
+	/* ATXBase/SB-x270 CardBus */
+	if (slot == 8 || slot == 0)
+		return IT8152_PCI_INTB;
+
+	/* ATXBase Ethernet */
+	if (slot == 9)
+		return IT8152_PCI_INTA;
+
+	/* SB-x270 Ethernet */
+	if (slot == 16)
+		return IT8152_PCI_INTA;
+
+	/* PC104+ interrupt routing */
+	if ((slot == 17) || (slot == 19))
+		return IT8152_PCI_INTA;
+	if ((slot == 18) || (slot == 20))
+		return IT8152_PCI_INTB;
+
+	return(0);
+}
+
+static struct pci_bus * __init
+cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n");
+
+	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
+	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
+		printk(KERN_INFO "PCI Bridge found.\n");
+
+		/* set PCI I/O base at 0 */
+		writel(0x848, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		/* set PCI memory base at 0 */
+		writel(0x840, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		writel(0x20, IT8152_GPIO_GPDR);
+
+		/* CardBus Controller on ATXbase baseboard */
+		writel(0x4000, IT8152_PCI_CFG_ADDR);
+		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
+			printk(KERN_INFO "CardBus Bridge found.\n");
+
+			/* Configure socket 0 */
+			writel(0x408C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4080, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4090, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4018, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+
+			/* Configure socket 1 */
+			writel(0x418C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4180, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4190, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4118, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+		}
+	}
+	return it8152_pci_scan_bus(nr, sys);
+}
+
+static struct hw_pci cmx270_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.map_irq	= cmx270_pci_map_irq,
+	.nr_controllers	= 1,
+	.setup		= it8152_pci_setup,
+	.scan		= cmx270_pci_scan_bus,
+};
+
+static int __init cmx270_init_pci(void)
+{
+	if (machine_is_armcore())
+		pci_common_init(&cmx270_pci);
+
+	return 0;
+}
+
+subsys_initcall(cmx270_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
new file mode 100644
index 00000000000..ffe37b66f9a
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_suspend(void);
+extern void __cmx270_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx270_pci_init_irq __cmx270_pci_init_irq
+#define cmx270_pci_suspend __cmx270_pci_suspend
+#define cmx270_pci_resume __cmx270_pci_resume
+#else
+#define cmx270_pci_init_irq() do {} while (0)
+#define cmx270_pci_suspend() do {} while (0)
+#define cmx270_pci_resume() do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
new file mode 100644
index 00000000000..177664ccb2e
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -0,0 +1,645 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x270.c
+ *
+ * Copyright (C) 2007 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pm.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <linux/dm9000.h>
+#include <linux/rtc-v3020.h>
+#include <linux/serial_8250.h>
+
+#include <video/mbxfb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/bitfield.h>
+#include <asm/arch/cm-x270.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x270-pci.h"
+
+#define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
+#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+
+static struct resource cmx270_dm9k_resource[] = {
+	[0] = {
+		.start = DM9000_PHYS_BASE,
+		.end   = DM9000_PHYS_BASE + 4,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DM9000_PHYS_BASE + 8,
+		.end   = DM9000_PHYS_BASE + 8 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX270_ETHIRQ,
+		.end   = CMX270_ETHIRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* for the moment we limit ourselves to 32bit IO until some
+ * better IO routines can be written and tested
+ */
+static struct dm9000_plat_data cmx270_dm9k_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+/* Ethernet device */
+static struct platform_device cmx270_device_dm9k = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
+	.resource	= cmx270_dm9k_resource,
+	.dev		= {
+		.platform_data = &cmx270_dm9k_platdata,
+	}
+};
+
+/* audio device */
+static struct platform_device cmx270_audio_device = {
+	.name		= "pxa2xx-ac97",
+	.id		= -1,
+};
+
+/* touchscreen controller */
+static struct platform_device cmx270_ts_device = {
+	.name		= "ucb1400_ts",
+	.id		= -1,
+};
+
+/* RTC */
+static struct resource cmx270_v3020_resource[] = {
+	[0] = {
+		.start = RTC_PHYS_BASE,
+		.end   = RTC_PHYS_BASE + 4,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct v3020_platform_data cmx270_v3020_pdata = {
+	.leftshift = 16,
+};
+
+static struct platform_device cmx270_rtc_device = {
+	.name		= "v3020",
+	.num_resources	= ARRAY_SIZE(cmx270_v3020_resource),
+	.resource	= cmx270_v3020_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_v3020_pdata,
+	}
+};
+
+/*
+ * CM-X270 LEDs
+ */
+static struct platform_device cmx270_led_device = {
+	.name		= "cm-x270-led",
+	.id		= -1,
+};
+
+/* 2700G graphics */
+static u64 fb_dma_mask = ~(u64)0;
+
+static struct resource cmx270_2700G_resource[] = {
+	/* frame buffer memory including ODFB and External SDRAM */
+	[0] = {
+		.start = MARATHON_PHYS,
+		.end   = MARATHON_PHYS + 0x02000000,
+		.flags = IORESOURCE_MEM,
+	},
+	/* Marathon registers */
+	[1] = {
+		.start = MARATHON_PHYS + 0x03fe0000,
+		.end   = MARATHON_PHYS + 0x03ffffff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static unsigned long save_lcd_regs[10];
+
+static int cmx270_marathon_probe(struct fb_info *fb)
+{
+	/* save PXA-270 pin settings before enabling 2700G */
+	save_lcd_regs[0] = GPDR1;
+	save_lcd_regs[1] = GPDR2;
+	save_lcd_regs[2] = GAFR1_U;
+	save_lcd_regs[3] = GAFR2_L;
+	save_lcd_regs[4] = GAFR2_U;
+
+	/* Disable PXA-270 on-chip controller driving pins */
+	GPDR1 &= ~(0xfc000000);
+	GPDR2 &= ~(0x00c03fff);
+	GAFR1_U &= ~(0xfff00000);
+	GAFR2_L &= ~(0x0fffffff);
+	GAFR2_U &= ~(0x0000f000);
+	return 0;
+}
+
+static int cmx270_marathon_remove(struct fb_info *fb)
+{
+	GPDR1 =   save_lcd_regs[0];
+	GPDR2 =   save_lcd_regs[1];
+	GAFR1_U = save_lcd_regs[2];
+	GAFR2_L = save_lcd_regs[3];
+	GAFR2_U = save_lcd_regs[4];
+	return 0;
+}
+
+static struct mbxfb_platform_data cmx270_2700G_data = {
+	.xres = {
+		.min = 240,
+		.max = 1200,
+		.defval = 640,
+	},
+	.yres = {
+		.min = 240,
+		.max = 1200,
+		.defval = 480,
+	},
+	.bpp = {
+		.min = 16,
+		.max = 32,
+		.defval = 16,
+	},
+	.memsize = 8*1024*1024,
+	.probe = cmx270_marathon_probe,
+	.remove = cmx270_marathon_remove,
+};
+
+static struct platform_device cmx270_2700G = {
+	.name		= "mbx-fb",
+	.dev		= {
+		.platform_data	= &cmx270_2700G_data,
+		.dma_mask	= &fb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(cmx270_2700G_resource),
+	.resource	= cmx270_2700G_resource,
+	.id		= -1,
+};
+
+static u64 ata_dma_mask = ~(u64)0;
+
+static struct platform_device cmx270_ata = {
+	.name = "pata_cm_x270",
+	.id = -1,
+	.dev		= {
+		.dma_mask	= &ata_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+/* platform devices */
+static struct platform_device *platform_devices[] __initdata = {
+	&cmx270_device_dm9k,
+	&cmx270_audio_device,
+	&cmx270_rtc_device,
+	&cmx270_2700G,
+	&cmx270_led_device,
+	&cmx270_ts_device,
+	&cmx270_ata,
+};
+
+/* Map PCI companion and IDE/General Purpose CS statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* IDE/general purpose space */
+		.virtual	= CMX270_IDE104_VIRT,
+		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
+		.length		= SZ_64M - SZ_8M,
+		.type		= MT_DEVICE
+	},
+	[1] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+  Display definitions
+  keep these for backwards compatibility, although symbolic names (as
+  e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240	0
+#define MTYPE_TFT640x480	1
+#define MTYPE_CRT640x480	2
+#define MTYPE_CRT800x600	3
+#define MTYPE_TFT320x240	6
+#define MTYPE_STN640x480	7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+	.pixclock	= 76923,
+	.bpp		= 8,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 3,
+	.vsync_len	= 2,
+	.left_margin	= 3,
+	.upper_margin	= 0,
+	.right_margin	= 3,
+	.lower_margin	= 0,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+	.modes		= &generic_stn_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x03) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 60,
+	.vsync_len	= 2,
+	.left_margin	= 70,
+	.upper_margin	= 10,
+	.right_margin	= 70,
+	.lower_margin	= 5,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+	.modes		= &generic_tft_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 81,
+	.upper_margin	= 33,
+	.right_margin	= 16,
+	.lower_margin	= 10,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+	.modes		= &generic_crt_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+	.pixclock	= 28846,
+	.bpp		= 8,
+	.xres		= 800,
+	.yres	  	= 600,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 26,
+	.upper_margin	= 21,
+	.right_margin	= 26,
+	.lower_margin	= 11,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+	.modes		= &generic_crt_800x600_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+	.pixclock	= 134615,
+	.bpp		= 16,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 63,
+	.vsync_len	= 7,
+	.left_margin	= 75,
+	.upper_margin	= 0,
+	.right_margin	= 15,
+	.lower_margin	= 15,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+	.modes		= &generic_tft_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x06) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+	.pixclock	= 57692,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 4,
+	.vsync_len	= 2,
+	.left_margin	= 10,
+	.upper_margin	= 5,
+	.right_margin	= 10,
+	.lower_margin	= 5,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+	.modes		= &generic_stn_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
+
+static int __init cmx270_set_display(char *str)
+{
+	int disp_type = simple_strtol(str, NULL, 0);
+	switch (disp_type) {
+	case MTYPE_STN320x240:
+		cmx270_display = &generic_stn_320x240;
+		break;
+	case MTYPE_TFT640x480:
+		cmx270_display = &generic_tft_640x480;
+		break;
+	case MTYPE_CRT640x480:
+		cmx270_display = &generic_crt_640x480;
+		break;
+	case MTYPE_CRT800x600:
+		cmx270_display = &generic_crt_800x600;
+		break;
+	case MTYPE_TFT320x240:
+		cmx270_display = &generic_tft_320x240;
+		break;
+	case MTYPE_STN640x480:
+		cmx270_display = &generic_stn_640x480;
+		break;
+	default: /* fallback to CRT 640x480 */
+		cmx270_display = &generic_crt_640x480;
+		break;
+	}
+	return 1;
+}
+
+/*
+   This should be done really early to get proper configuration for
+   frame buffer.
+   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
+   has limitied line length for kernel command line, and also it will
+   break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx270_set_display);
+
+/* PXA27x OHCI controller setup */
+static int cmx270_ohci_init(struct device *dev)
+{
+	/* Set the Power Control Polarity Low */
+	UHCHR = (UHCHR | UHCHR_PCPL) &
+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+
+	return 0;
+}
+
+static struct pxaohci_platform_data cmx270_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= cmx270_ohci_init,
+};
+
+
+static int cmx270_mci_init(struct device *dev,
+			   irq_handler_t cmx270_detect_int,
+			   void *data)
+{
+	int err;
+
+	/*
+	 * setup GPIO for PXA27x MMC controller
+	 */
+	pxa_gpio_mode(GPIO32_MMCCLK_MD);
+	pxa_gpio_mode(GPIO112_MMCCMD_MD);
+	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+	/* SB-X270 uses GPIO105 as SD power enable */
+	pxa_gpio_mode(105 | GPIO_OUT);
+
+	/* card detect IRQ on GPIO 83 */
+	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
+
+	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
+		       " request MMC card detect IRQ\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		GPCR(105) = GPIO_bit(105);
+	} else {
+		GPSR(105) = GPIO_bit(105);
+		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+	}
+}
+
+static void cmx270_mci_exit(struct device *dev, void *data)
+{
+	free_irq(CMX270_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cmx270_mci_init,
+	.setpower 	= cmx270_mci_setpower,
+	.exit		= cmx270_mci_exit,
+};
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
+{
+	cmx270_pci_suspend();
+
+	/* save MSC registers */
+	sleep_save_msc[0] = MSC0;
+	sleep_save_msc[1] = MSC1;
+	sleep_save_msc[2] = MSC2;
+
+	/* setup power saving mode registers */
+	PCFR = 0x0;
+	PSLR = 0xff400000;
+	PMCR  = 0x00000005;
+	PWER  = 0x80000000;
+	PFER  = 0x00000000;
+	PRER  = 0x00000000;
+	PGSR0 = 0xC0018800;
+	PGSR1 = 0x004F0002;
+	PGSR2 = 0x6021C000;
+	PGSR3 = 0x00020000;
+
+	return 0;
+}
+
+static int cmx270_resume(struct sys_device *dev)
+{
+	cmx270_pci_resume();
+
+	/* restore MSC registers */
+	MSC0 = sleep_save_msc[0];
+	MSC1 = sleep_save_msc[1];
+	MSC2 = sleep_save_msc[2];
+
+	return 0;
+}
+
+static struct sysdev_class cmx270_pm_sysclass = {
+	set_kset_name("pm"),
+	.resume = cmx270_resume,
+	.suspend = cmx270_suspend,
+};
+
+static struct sys_device cmx270_pm_device = {
+	.cls = &cmx270_pm_sysclass,
+};
+
+static int __init cmx270_pm_init(void)
+{
+	int error;
+	error = sysdev_class_register(&cmx270_pm_sysclass);
+	if (error == 0)
+		error = sysdev_register(&cmx270_pm_device);
+	return error;
+}
+#else
+static int __init cmx270_pm_init(void) { return 0; }
+#endif
+
+static void __init cmx270_init(void)
+{
+	cmx270_pm_init();
+
+	set_pxa_fb_info(cmx270_display);
+
+	/* register CM-X270 platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	/* set MCI and OHCI platform parameters */
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+
+	/* This enables the STUART */
+	pxa_gpio_mode(GPIO46_STRXD_MD);
+	pxa_gpio_mode(GPIO47_STTXD_MD);
+
+	/* This enables the BTUART  */
+	pxa_gpio_mode(GPIO42_BTRXD_MD);
+	pxa_gpio_mode(GPIO43_BTTXD_MD);
+	pxa_gpio_mode(GPIO44_BTCTS_MD);
+	pxa_gpio_mode(GPIO45_BTRTS_MD);
+}
+
+static void __init cmx270_init_irq(void)
+{
+	pxa27x_init_irq();
+
+
+	cmx270_pci_init_irq();
+
+	/* Setup interrupt for dm9000 */
+	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
+	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+
+	/* Setup interrupt for 2700G */
+	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
+	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+}
+
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
+}
+
+
+MACHINE_START(ARMCORE, "Compulab CM-x270")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= cmx270_map_io,
+	.init_irq	= cmx270_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cmx270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 636fdb1c049..94c8d5cdd60 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -9,3 +9,6 @@ extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
 extern struct platform_device pxa_device_ficp;
 extern struct platform_device pxa_device_rtc;
+
+extern struct platform_device pxa27x_device_i2c_power;
+extern struct platform_device pxa27x_device_ohci;
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 5510f6fdce5..1c34946ee16 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -25,10 +25,6 @@
 #include <linux/pm.h>
 #include <linux/string.h>
 
-#include <linux/sched.h>
-#include <asm/cnt32_to_63.h>
-#include <asm/div64.h>
-
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -47,66 +43,39 @@
 #include "generic.h"
 
 /*
- * This is the PXA2xx sched_clock implementation. This has a resolution
- * of at least 308ns and a maximum value that depends on the value of
- * CLOCK_TICK_RATE.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
+ * Get the clock frequency as reflected by CCCR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
  */
-unsigned long long sched_clock(void)
+unsigned int get_clk_frequency_khz(int info)
 {
-	unsigned long long v = cnt32_to_63(OSCR);
-	/* Note: top bit ov v needs cleared unless multiplier is even. */
-
-#if	CLOCK_TICK_RATE == 3686400
-	/* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */
-	/* The <<1 is used to get rid of tick.hi top bit */
-	v *= 78125<<1;
-	do_div(v, 288<<1);
-#elif	CLOCK_TICK_RATE == 3250000
-	/* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */
-	v *= 4000;
-	do_div(v, 13);
-#elif	CLOCK_TICK_RATE == 3249600
-	/* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */
-	v *= 625000;
-	do_div(v, 2031);
-#else
-#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE"
-	/*
-	 * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for
-	 * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand
-	 * years range and truncation to unsigned long long limits it to
-	 * sched_clock's max range of ~584 years.  This is nice but with
-	 * higher computation cost.
-	 */
-	{
-		union {
-			unsigned long long val;
-			struct { unsigned long lo, hi; };
-		} x;
-		unsigned long long y;
-
-		x.val = v;
-		x.hi &= 0x7fffffff;
-		y = (unsigned long long)x.lo * NSEC_PER_SEC;
-		x.lo = y;
-		y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC;
-		x.hi = do_div(y, CLOCK_TICK_RATE);
-		do_div(x.val, CLOCK_TICK_RATE);
-		x.hi += y;
-		v = x.val;
-	}
-#endif
+	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+		return pxa25x_get_clk_frequency_khz(info);
+	else if (cpu_is_pxa27x())
+		return pxa27x_get_clk_frequency_khz(info);
+	else
+		return pxa3xx_get_clk_frequency_khz(info);
+}
+EXPORT_SYMBOL(get_clk_frequency_khz);
 
-	return v;
+/*
+ * Return the current memory clock frequency in units of 10kHz
+ */
+unsigned int get_memclk_frequency_10khz(void)
+{
+	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+		return pxa25x_get_memclk_frequency_10khz();
+	else if (cpu_is_pxa27x())
+		return pxa27x_get_memclk_frequency_10khz();
+	else
+		return pxa3xx_get_memclk_frequency_10khz();
 }
+EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
 /*
  * Handy function to set GPIO alternate functions
  */
+int pxa_last_gpio;
 
 int pxa_gpio_mode(int gpio_mode)
 {
@@ -115,7 +84,7 @@ int pxa_gpio_mode(int gpio_mode)
 	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
 	int gafr;
 
-	if (gpio > PXA_LAST_GPIO)
+	if (gpio > pxa_last_gpio)
 		return -EINVAL;
 
 	local_irq_save(flags);
@@ -136,6 +105,44 @@ int pxa_gpio_mode(int gpio_mode)
 
 EXPORT_SYMBOL(pxa_gpio_mode);
 
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 mask;
+
+	if (gpio > pxa_last_gpio)
+		return -EINVAL;
+
+	mask = GPIO_bit(gpio);
+	local_irq_save(flags);
+	GPDR(gpio) &= ~mask;
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 mask;
+
+	if (gpio > pxa_last_gpio)
+		return -EINVAL;
+
+	mask = GPIO_bit(gpio);
+	local_irq_save(flags);
+	if (value)
+		GPSR(gpio) = mask;
+	else
+		GPCR(gpio) = mask;
+	GPDR(gpio) |= mask;
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
 /*
  * Return GPIO level
  */
@@ -159,7 +166,7 @@ EXPORT_SYMBOL(pxa_gpio_set_value);
 /*
  * Routine to safely enable or disable a clock in the CKEN
  */
-void pxa_set_cken(int clock, int enable)
+void __pxa_set_cken(int clock, int enable)
 {
 	unsigned long flags;
 	local_irq_save(flags);
@@ -172,7 +179,7 @@ void pxa_set_cken(int clock, int enable)
 	local_irq_restore(flags);
 }
 
-EXPORT_SYMBOL(pxa_set_cken);
+EXPORT_SYMBOL(__pxa_set_cken);
 
 /*
  * Intel PXA2xx internal register mapping.
@@ -329,21 +336,80 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
 	pxa_device_fb.dev.parent = parent_dev;
 }
 
+static struct resource pxa_resource_ffuart[] = {
+	{
+		.start	= __PREG(FFUART),
+		.end	= __PREG(FFUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_FFUART,
+		.end	= IRQ_FFUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
 struct platform_device pxa_device_ffuart= {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
+	.resource	= pxa_resource_ffuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
 };
+
+static struct resource pxa_resource_btuart[] = {
+	{
+		.start	= __PREG(BTUART),
+		.end	= __PREG(BTUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_BTUART,
+		.end	= IRQ_BTUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
 struct platform_device pxa_device_btuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 1,
+	.resource	= pxa_resource_btuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
 };
+
+static struct resource pxa_resource_stuart[] = {
+	{
+		.start	= __PREG(STUART),
+		.end	= __PREG(STUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_STUART,
+		.end	= IRQ_STUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
 struct platform_device pxa_device_stuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 2,
+	.resource	= pxa_resource_stuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
 };
+
+static struct resource pxa_resource_hwuart[] = {
+	{
+		.start	= __PREG(HWUART),
+		.end	= __PREG(HWUART) + 47,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_HWUART,
+		.end	= IRQ_HWUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
 struct platform_device pxa_device_hwuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 3,
+	.resource	= pxa_resource_hwuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
 };
 
 static struct resource pxai2c_resources[] = {
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 91ab2ad8b34..b30f240a16c 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,14 +15,40 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq_low(void);
 extern void __init pxa_init_irq_high(void);
 extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa27x_init_irq(void);
+extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
+extern int pxa_last_gpio;
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
 	mi->bank[__nr].size = (__size), \
 	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
 
+#ifdef CONFIG_PXA25x
+extern unsigned pxa25x_get_clk_frequency_khz(int);
+extern unsigned pxa25x_get_memclk_frequency_10khz(void);
+#else
+#define pxa25x_get_clk_frequency_khz(x)		(0)
+#define pxa25x_get_memclk_frequency_10khz()	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+extern unsigned pxa27x_get_clk_frequency_khz(int);
+extern unsigned pxa27x_get_memclk_frequency_10khz(void);
+#else
+#define pxa27x_get_clk_frequency_khz(x)		(0)
+#define pxa27x_get_memclk_frequency_10khz()	(0)
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern unsigned pxa3xx_get_clk_frequency_khz(int);
+extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+#else
+#define pxa3xx_get_clk_frequency_khz(x)		(0)
+#define pxa3xx_get_memclk_frequency_10khz()	(0)
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ae2ae08032d..07acb45b16e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -38,33 +38,11 @@ static void pxa_unmask_low_irq(unsigned int irq)
 	ICMR |= (1 << irq);
 }
 
-static int pxa_set_wake(unsigned int irq, unsigned int on)
-{
-	u32	mask;
-
-	switch (irq) {
-	case IRQ_RTCAlrm:
-		mask = PWER_RTC;
-		break;
-#ifdef CONFIG_PXA27x
-	/* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */
-#endif
-	default:
-		return -EINVAL;
-	}
-	if (on)
-		PWER |= mask;
-	else
-		PWER &= ~mask;
-	return 0;
-}
-
 static struct irq_chip pxa_internal_chip_low = {
 	.name		= "SC",
 	.ack		= pxa_mask_low_irq,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
-	.set_wake	= pxa_set_wake,
 };
 
 void __init pxa_init_irq_low(void)
@@ -87,7 +65,7 @@ void __init pxa_init_irq_low(void)
 	}
 }
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 
 /*
  * This is for the second set of internal IRQs as found on the PXA27x.
@@ -125,26 +103,6 @@ void __init pxa_init_irq_high(void)
 }
 #endif
 
-/* Note that if an input/irq line ever gets changed to an output during
- * suspend, the relevant PWER, PRER, and PFER bits should be cleared.
- */
-#ifdef CONFIG_PXA27x
-
-/* PXA27x:  Various gpios can issue wakeup events.  This logic only
- * handles the simple cases, not the WEMUX2 and WEMUX3 options
- */
-#define PXA27x_GPIO_NOWAKE_MASK \
-	((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
-#define	WAKEMASK(gpio) \
-	(((gpio) <= 15) \
-		? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
-		: ((gpio == 35) ? (1 << 24) : 0))
-#else
-
-/* pxa 210, 250, 255, 26x:  gpios 0..15 can issue wakeups */
-#define	WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0)
-#endif
-
 /*
  * PXA GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
@@ -158,11 +116,9 @@ static long GPIO_IRQ_mask[4];
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int gpio, idx;
-	u32 mask;
 
 	gpio = IRQ_TO_GPIO(irq);
 	idx = gpio >> 5;
-	mask = WAKEMASK(gpio);
 
 	if (type == IRQT_PROBE) {
 	    /* Don't mess with enabled GPIOs using preconfigured edges or
@@ -182,19 +138,15 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	if (type & __IRQT_RISEDGE) {
 		/* printk("rising "); */
 		__set_bit (gpio, GPIO_IRQ_rising_edge);
-		PRER |= mask;
 	} else {
 		__clear_bit (gpio, GPIO_IRQ_rising_edge);
-		PRER &= ~mask;
 	}
 
 	if (type & __IRQT_FALEDGE) {
 		/* printk("falling "); */
 		__set_bit (gpio, GPIO_IRQ_falling_edge);
-		PFER |= mask;
 	} else {
 		__clear_bit (gpio, GPIO_IRQ_falling_edge);
-		PFER &= ~mask;
 	}
 
 	/* printk("edges\n"); */
@@ -213,29 +165,12 @@ static void pxa_ack_low_gpio(unsigned int irq)
 	GEDR0 = (1 << (irq - IRQ_GPIO0));
 }
 
-static int pxa_set_gpio_wake(unsigned int irq, unsigned int on)
-{
-	int	gpio = IRQ_TO_GPIO(irq);
-	u32	mask = WAKEMASK(gpio);
-
-	if (!mask)
-		return -EINVAL;
-
-	if (on)
-		PWER |= mask;
-	else
-		PWER &= ~mask;
-	return 0;
-}
-
-
 static struct irq_chip pxa_low_gpio_chip = {
 	.name		= "GPIO-l",
 	.ack		= pxa_ack_low_gpio,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
 	.set_type	= pxa_gpio_irq_type,
-	.set_wake	= pxa_set_gpio_wake,
 };
 
 /*
@@ -342,13 +277,14 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 	.mask		= pxa_mask_muxed_gpio,
 	.unmask		= pxa_unmask_muxed_gpio,
 	.set_type	= pxa_gpio_irq_type,
-	.set_wake	= pxa_set_gpio_wake,
 };
 
 void __init pxa_init_irq_gpio(int gpio_nr)
 {
 	int irq, i;
 
+	pxa_last_gpio = gpio_nr - 1;
+
 	/* clear all GPIO edge detects */
 	for (i = 0; i < gpio_nr; i += 32) {
 		GFER(i) = 0;
@@ -375,3 +311,13 @@ void __init pxa_init_irq_gpio(int gpio_nr)
 	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
 	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
 }
+
+void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
+{
+	pxa_internal_chip_low.set_wake = set_wake;
+#ifdef CONFIG_PXA27x
+	pxa_internal_chip_high.set_wake = set_wake;
+#endif
+	pxa_low_gpio_chip.set_wake = set_wake;
+	pxa_muxed_gpio_chip.set_wake = set_wake;
+}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e70048fd00a..011a1a72b61 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -512,6 +512,25 @@ static void __init lubbock_map_io(void)
 	pxa_gpio_mode(GPIO44_BTCTS_MD);
 	pxa_gpio_mode(GPIO45_BTRTS_MD);
 
+	GPSR(GPIO48_nPOE) =
+		GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) |
+		GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) |
+		GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+
 	/* This is for the SMC chip select */
 	pxa_gpio_mode(GPIO79_nCS_3_MD);
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index b02c79c7e6a..a4bc3483cbb 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -444,6 +444,25 @@ static void __init mainstone_init(void)
 	 */
 	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
 
+	GPSR(GPIO48_nPOE) =
+		GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) |
+		GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) |
+		GPIO_bit(GPIO85_nPCE_1) |
+		GPIO_bit(GPIO54_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO85_nPCE_1_MD);
+	pxa_gpio_mode(GPIO54_nPCE_2_MD);
+	pxa_gpio_mode(GPIO79_pSKTSEL_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	/* reading Mainstone's "Virtual Configuration Register"
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
new file mode 100644
index 00000000000..5cd3cadbbd1
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp.c
@@ -0,0 +1,235 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp.c
+ *
+ * PXA3xx Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config(int pin, unsigned long val)
+{
+	unsigned long off = mfp_table[pin].mfpr_off;
+
+	mfp_table[pin].mfpr_val = val;
+	mfpr_writel(off, val);
+}
+
+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+{
+	int i, pin;
+	unsigned long val, flags;
+	mfp_cfg_t *mfp_cfg = mfp_cfgs;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfg++) {
+		pin = MFP_CFG_PIN(*mfp_cfg);
+		val = MFP_CFG_VAL(*mfp_cfg);
+
+		BUG_ON(pin >= MFP_PIN_MAX);
+
+		__mfp_config(pin, val);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long pxa3xx_mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
+{
+	uint32_t mfpr_off, mfpr_val;
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_off = mfp_table[mfp].mfpr_off;
+
+	mfpr_val = mfpr_readl(mfpr_off);
+	mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
+	mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
+		     ((ds & 0x7) << MFPR_DRV_OFFSET));
+
+	mfpr_writel(mfpr_off, mfpr_val);
+	mfpr_sync();
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_rdh(int mfp, int rdh)
+{
+	uint32_t mfpr_off, mfpr_val;
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	mfpr_off = mfp_table[mfp].mfpr_off;
+
+	mfpr_val = mfpr_readl(mfpr_off);
+	mfpr_val &= ~MFPR_RDH_MASK;
+
+	if (likely(rdh))
+		mfpr_val |= (1u << MFPR_SS_OFFSET);
+
+	mfpr_writel(mfpr_off, mfpr_val);
+	mfpr_sync();
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_lpm(int mfp, int lpm)
+{
+	uint32_t mfpr_off, mfpr_val;
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	mfpr_off = mfp_table[mfp].mfpr_off;
+	mfpr_val = mfpr_readl(mfpr_off);
+	mfpr_val &= ~MFPR_LPM_MASK;
+
+	if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
+	if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
+	if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
+	if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
+	if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
+
+	mfpr_writel(mfpr_off, mfpr_val);
+	mfpr_sync();
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_pull(int mfp, int pull)
+{
+	uint32_t mfpr_off, mfpr_val;
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	mfpr_off = mfp_table[mfp].mfpr_off;
+	mfpr_val = mfpr_readl(mfpr_off);
+	mfpr_val &= ~MFPR_PULL_MASK;
+	mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
+
+	mfpr_writel(mfpr_off, mfpr_val);
+	mfpr_sync();
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void pxa3xx_mfp_set_edge(int mfp, int edge)
+{
+	uint32_t mfpr_off, mfpr_val;
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	mfpr_off = mfp_table[mfp].mfpr_off;
+	mfpr_val = mfpr_readl(mfpr_off);
+
+	mfpr_val &= ~MFPR_EDGE_MASK;
+	mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
+	mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
+
+	mfpr_writel(mfpr_off, mfpr_val);
+	mfpr_sync();
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
+{
+	struct pxa3xx_mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_val = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init pxa3xx_init_mfp(void)
+{
+	memset(mfp_table, 0, sizeof(mfp_table));
+}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6dfcca72e90..0d6a72504ca 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -30,6 +30,7 @@
 
 #include "generic.h"
 #include "devices.h"
+#include "clock.h"
 
 /*
  * Various clock factors driven by the CCCR register.
@@ -53,7 +54,7 @@ static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
  * We assume these values have been applied via a fcs.
  * If info is not 0 we also display the current settings.
  */
-unsigned int get_clk_frequency_khz(int info)
+unsigned int pxa25x_get_clk_frequency_khz(int info)
 {
 	unsigned long cccr, turbo;
 	unsigned int l, L, m, M, n2, N;
@@ -86,27 +87,48 @@ unsigned int get_clk_frequency_khz(int info)
 	return (turbo & 1) ? (N/1000) : (M/1000);
 }
 
-EXPORT_SYMBOL(get_clk_frequency_khz);
-
 /*
  * Return the current memory clock frequency in units of 10kHz
  */
-unsigned int get_memclk_frequency_10khz(void)
+unsigned int pxa25x_get_memclk_frequency_10khz(void)
 {
 	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
 }
 
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-
-/*
- * Return the current LCD clock frequency in units of 10kHz
- */
-unsigned int get_lcdclk_frequency_10khz(void)
+static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
 {
-	return get_memclk_frequency_10khz();
+	return pxa25x_get_memclk_frequency_10khz() * 10000;
 }
 
-EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+static const struct clkops clk_pxa25x_lcd_ops = {
+	.enable		= clk_cken_enable,
+	.disable	= clk_cken_disable,
+	.getrate	= clk_pxa25x_lcd_getrate,
+};
+
+/*
+ * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
+ * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
+ * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
+ */
+static struct clk pxa25x_clks[] = {
+	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
+	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
+	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
+	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
+	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
+	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
+	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
+	/*
+	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
+	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
+	INIT_CKEN("SSPCLK",  SSP,  3686400,  0, NULL),
+	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
+	INIT_CKEN("NSSPCLK", NSSP, 3686400,  0, NULL),
+	*/
+	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
+};
 
 #ifdef CONFIG_PM
 
@@ -205,10 +227,52 @@ static void __init pxa25x_init_pm(void)
 }
 #endif
 
+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
+ */
+
+static int pxa25x_set_wake(unsigned int irq, unsigned int on)
+{
+	int gpio = IRQ_TO_GPIO(irq);
+	uint32_t gpio_bit, mask = 0;
+
+	if (gpio >= 0 && gpio <= 15) {
+		gpio_bit = GPIO_bit(gpio);
+		mask = gpio_bit;
+		if (on) {
+			if (GRER(gpio) | gpio_bit)
+				PRER |= gpio_bit;
+			else
+				PRER &= ~gpio_bit;
+
+			if (GFER(gpio) | gpio_bit)
+				PFER |= gpio_bit;
+			else
+				PFER &= ~gpio_bit;
+		}
+		goto set_pwer;
+	}
+
+	if (irq == IRQ_RTCAlrm) {
+		mask = PWER_RTC;
+		goto set_pwer;
+	}
+
+	return -EINVAL;
+
+set_pwer:
+	if (on)
+		PWER |= mask;
+	else
+		PWER &=~mask;
+
+	return 0;
+}
+
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq_low();
 	pxa_init_irq_gpio(85);
+	pxa_init_irq_set_wake(pxa25x_set_wake);
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
@@ -229,6 +293,8 @@ static int __init pxa25x_init(void)
 	int ret = 0;
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
+
 		if ((ret = pxa_init_dma(16)))
 			return ret;
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 203371ab19d..2d7fc39732e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,6 +27,7 @@
 
 #include "generic.h"
 #include "devices.h"
+#include "clock.h"
 
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
@@ -36,7 +37,7 @@
  * We assume these values have been applied via a fcs.
  * If info is not 0 we also display the current settings.
  */
-unsigned int get_clk_frequency_khz( int info)
+unsigned int pxa27x_get_clk_frequency_khz(int info)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M, n2, N, S;
@@ -79,7 +80,7 @@ unsigned int get_clk_frequency_khz( int info)
  * Return the current mem clock frequency in units of 10kHz as
  * reflected by CCCR[A], B, and L
  */
-unsigned int get_memclk_frequency_10khz(void)
+unsigned int pxa27x_get_memclk_frequency_10khz(void)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M;
@@ -104,7 +105,7 @@ unsigned int get_memclk_frequency_10khz(void)
 /*
  * Return the current LCD clock frequency in units of 10kHz as
  */
-unsigned int get_lcdclk_frequency_10khz(void)
+static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
 {
 	unsigned long ccsr;
 	unsigned int l, L, k, K;
@@ -120,9 +121,47 @@ unsigned int get_lcdclk_frequency_10khz(void)
 	return (K / 10000);
 }
 
-EXPORT_SYMBOL(get_clk_frequency_khz);
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
+{
+	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
+}
+
+static const struct clkops clk_pxa27x_lcd_ops = {
+	.enable		= clk_cken_enable,
+	.disable	= clk_cken_disable,
+	.getrate	= clk_pxa27x_lcd_getrate,
+};
+
+static struct clk pxa27x_clks[] = {
+	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
+	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),
+
+	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+
+	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
+	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
+	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
+	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
+
+	INIT_CKEN("USBCLK", USB,    48000000, 0, &pxa27x_device_ohci.dev),
+	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
+	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
+
+	/*
+	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
+	INIT_CKEN("SSPCLK",  SSP1, 13000000, 0, NULL),
+	INIT_CKEN("SSPCLK",  SSP2, 13000000, 0, NULL),
+	INIT_CKEN("SSPCLK",  SSP3, 13000000, 0, NULL),
+	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
+	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
+	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
+	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
+	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
+	*/
+};
 
 #ifdef CONFIG_PM
 
@@ -267,6 +306,69 @@ static void __init pxa27x_init_pm(void)
 }
 #endif
 
+/* PXA27x:  Various gpios can issue wakeup events.  This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+#define PXA27x_GPIO_NOWAKE_MASK \
+        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+#define WAKEMASK(gpio) \
+        (((gpio) <= 15) \
+                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+                 : ((gpio == 35) ? (1 << 24) : 0))
+
+static int pxa27x_set_wake(unsigned int irq, unsigned int on)
+{
+	int gpio = IRQ_TO_GPIO(irq);
+	uint32_t mask;
+
+	if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
+		if (WAKEMASK(gpio) == 0)
+			return -EINVAL;
+
+		mask = WAKEMASK(gpio);
+
+		if (on) {
+			if (GRER(gpio) | GPIO_bit(gpio))
+				PRER |= mask;
+			else
+				PRER &= ~mask;
+
+			if (GFER(gpio) | GPIO_bit(gpio))
+				PFER |= mask;
+			else
+				PFER &= ~mask;
+		}
+		goto set_pwer;
+	}
+
+	switch (irq) {
+	case IRQ_RTCAlrm:
+		mask = PWER_RTC;
+		break;
+	case IRQ_USB:
+		mask = 1u << 26;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+set_pwer:
+	if (on)
+		PWER |= mask;
+	else
+		PWER &=~mask;
+
+	return 0;
+}
+
+void __init pxa27x_init_irq(void)
+{
+	pxa_init_irq_low();
+	pxa_init_irq_high();
+	pxa_init_irq_gpio(128);
+	pxa_init_irq_set_wake(pxa27x_set_wake);
+}
+
 /*
  * device registration specific to PXA27x.
  */
@@ -286,7 +388,7 @@ static struct resource pxa27x_ohci_resources[] = {
 	},
 };
 
-static struct platform_device pxa27x_device_ohci = {
+struct platform_device pxa27x_device_ohci = {
 	.name		= "pxa27x-ohci",
 	.id		= -1,
 	.dev		= {
@@ -314,7 +416,7 @@ static struct resource i2c_power_resources[] = {
 	},
 };
 
-static struct platform_device pxa27x_device_i2c_power = {
+struct platform_device pxa27x_device_i2c_power = {
 	.name		= "pxa2xx-i2c",
 	.id		= 1,
 	.resource	= i2c_power_resources,
@@ -336,17 +438,12 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ohci,
 };
 
-void __init pxa27x_init_irq(void)
-{
-	pxa_init_irq_low();
-	pxa_init_irq_high();
-	pxa_init_irq_gpio(128);
-}
-
 static int __init pxa27x_init(void)
 {
 	int ret = 0;
 	if (cpu_is_pxa27x()) {
+		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
+
 		if ((ret = pxa_init_dma(32)))
 			return ret;
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
new file mode 100644
index 00000000000..5363b132265
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -0,0 +1,93 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa300.c
+ *
+ * Code specific to PXA300/PXA310
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa300.h>
+
+static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
+	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
+	MFP_ADDR_X(GPIO27,  GPIO127, 0x0400),
+	MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec),
+
+	MFP_ADDR(nBE0, 0x0204),
+	MFP_ADDR(nBE1, 0x0208),
+
+	MFP_ADDR(nLUA, 0x0244),
+	MFP_ADDR(nLLA, 0x0254),
+
+	MFP_ADDR(DF_CLE_nOE, 0x0240),
+	MFP_ADDR(DF_nRE_nOE, 0x0200),
+	MFP_ADDR(DF_ALE_nWE, 0x020C),
+	MFP_ADDR(DF_INT_RnB, 0x00C8),
+	MFP_ADDR(DF_nCS0, 0x0248),
+	MFP_ADDR(DF_nCS1, 0x0278),
+	MFP_ADDR(DF_nWE, 0x00CC),
+
+	MFP_ADDR(DF_ADDR0, 0x0210),
+	MFP_ADDR(DF_ADDR1, 0x0214),
+	MFP_ADDR(DF_ADDR2, 0x0218),
+	MFP_ADDR(DF_ADDR3, 0x021C),
+
+	MFP_ADDR(DF_IO0, 0x0220),
+	MFP_ADDR(DF_IO1, 0x0228),
+	MFP_ADDR(DF_IO2, 0x0230),
+	MFP_ADDR(DF_IO3, 0x0238),
+	MFP_ADDR(DF_IO4, 0x0258),
+	MFP_ADDR(DF_IO5, 0x0260),
+	MFP_ADDR(DF_IO6, 0x0268),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0224),
+	MFP_ADDR(DF_IO9, 0x022C),
+	MFP_ADDR(DF_IO10, 0x0234),
+	MFP_ADDR(DF_IO11, 0x023C),
+	MFP_ADDR(DF_IO12, 0x025C),
+	MFP_ADDR(DF_IO13, 0x0264),
+	MFP_ADDR(DF_IO14, 0x026C),
+	MFP_ADDR(DF_IO15, 0x0274),
+
+	MFP_ADDR_END,
+};
+
+/* override pxa300 MFP register addresses */
+static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+	MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
+	MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
+
+	MFP_ADDR(ULPI_STP, 0x040C),
+	MFP_ADDR(ULPI_NXT, 0x0410),
+	MFP_ADDR(ULPI_DIR, 0x0414),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+	}
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+
+	return 0;
+}
+
+core_initcall(pxa300_init);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
new file mode 100644
index 00000000000..cd9eba5b3df
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -0,0 +1,88 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa320.c
+ *
+ * Code specific to PXA320
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa320.h>
+
+static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
+	MFP_ADDR_X(GPIO5,  GPIO26,  0x028C),
+	MFP_ADDR_X(GPIO27, GPIO62,  0x0400),
+	MFP_ADDR_X(GPIO63, GPIO73,  0x04B4),
+	MFP_ADDR_X(GPIO74, GPIO98,  0x04F0),
+	MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
+	MFP_ADDR_X(GPIO0_2,  GPIO5_2,   0x0674),
+	MFP_ADDR_X(GPIO6_2,  GPIO13_2,  0x0494),
+	MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
+
+	MFP_ADDR(nXCVREN, 0x0138),
+	MFP_ADDR(DF_CLE_nOE, 0x0204),
+	MFP_ADDR(DF_nADV1_ALE, 0x0208),
+	MFP_ADDR(DF_SCLK_S, 0x020C),
+	MFP_ADDR(DF_SCLK_E, 0x0210),
+	MFP_ADDR(nBE0, 0x0214),
+	MFP_ADDR(nBE1, 0x0218),
+	MFP_ADDR(DF_nADV2_ALE, 0x021C),
+	MFP_ADDR(DF_INT_RnB, 0x0220),
+	MFP_ADDR(DF_nCS0, 0x0224),
+	MFP_ADDR(DF_nCS1, 0x0228),
+	MFP_ADDR(DF_nWE, 0x022C),
+	MFP_ADDR(DF_nRE_nOE, 0x0230),
+	MFP_ADDR(nLUA, 0x0234),
+	MFP_ADDR(nLLA, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x023C),
+	MFP_ADDR(DF_ADDR1, 0x0240),
+	MFP_ADDR(DF_ADDR2, 0x0244),
+	MFP_ADDR(DF_ADDR3, 0x0248),
+	MFP_ADDR(DF_IO0, 0x024C),
+	MFP_ADDR(DF_IO8, 0x0250),
+	MFP_ADDR(DF_IO1, 0x0254),
+	MFP_ADDR(DF_IO9, 0x0258),
+	MFP_ADDR(DF_IO2, 0x025C),
+	MFP_ADDR(DF_IO10, 0x0260),
+	MFP_ADDR(DF_IO3, 0x0264),
+	MFP_ADDR(DF_IO11, 0x0268),
+	MFP_ADDR(DF_IO4, 0x026C),
+	MFP_ADDR(DF_IO12, 0x0270),
+	MFP_ADDR(DF_IO5, 0x0274),
+	MFP_ADDR(DF_IO13, 0x0278),
+	MFP_ADDR(DF_IO6, 0x027C),
+	MFP_ADDR(DF_IO14, 0x0280),
+	MFP_ADDR(DF_IO7, 0x0284),
+	MFP_ADDR(DF_IO15, 0x0288),
+
+	MFP_ADDR_END,
+};
+
+static void __init pxa320_init_mfp(void)
+{
+	pxa3xx_init_mfp();
+	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+}
+
+static int __init pxa320_init(void)
+{
+	if (cpu_is_pxa320())
+		pxa320_init_mfp();
+
+	return 0;
+}
+
+core_initcall(pxa320_init);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
new file mode 100644
index 00000000000..39f0de8c189
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -0,0 +1,216 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-02: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/ssp.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK	13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK		60000000
+
+#define ACCR_D0CS	(1 << 26)
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+	unsigned long acsr, xclkcfg;
+	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	acsr = ACSR;
+
+	xl  = acsr & 0x1f;
+	xn  = (acsr >> 8) & 0x7;
+	hss = (acsr >> 14) & 0x3;
+
+	XL = xl * BASE_CLK;
+	XN = xn * XL;
+
+	ro = acsr & ACCR_D0CS;
+
+	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	if (info) {
+		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+			(ro) ? "" : "in");
+		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+			XL / 1000000, (XL % 1000000) / 10000, xl);
+		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+			XN / 1000000, (XN % 1000000) / 10000, xn,
+			(t) ? "" : "in");
+		pr_info("HSIO bus clock: %d.%02dMHz\n",
+			HSS / 1000000, (HSS % 1000000) / 10000);
+	}
+
+	return CLK;
+}
+
+/*
+ * Return the current static memory controller clock frequency
+ * in units of 10kHz
+ */
+unsigned int pxa3xx_get_memclk_frequency_10khz(void)
+{
+	unsigned long acsr;
+	unsigned int smcfs, clk = 0;
+
+	acsr = ACSR;
+
+	smcfs = (acsr >> 23) & 0x7;
+	clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
+
+	return (clk / 10000);
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+	unsigned long acsr;
+	unsigned int hss, hsio_clk;
+
+	acsr = ACSR;
+
+	hss = (acsr >> 14) & 0x3;
+	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	return hsio_clk;
+}
+
+static void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	local_irq_disable();
+
+	if (clk->cken < 32)
+		CKENA |= mask;
+	else
+		CKENB |= mask;
+
+	local_irq_enable();
+}
+
+static void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	local_irq_disable();
+
+	if (clk->cken < 32)
+		CKENA &= ~mask;
+	else
+		CKENB &= ~mask;
+
+	local_irq_enable();
+}
+
+static const struct clkops clk_pxa3xx_hsio_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_hsio_getrate,
+};
+
+static struct clk pxa3xx_clks[] = {
+	INIT_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+	INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+
+	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+
+	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
+	INIT_CKEN("UDCCLK",  UDC,  48000000, 5, &pxa_device_udc.dev),
+};
+
+void __init pxa3xx_init_irq(void)
+{
+	/* enable CP6 access */
+	u32 value;
+	__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
+	value |= (1 << 6);
+	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
+
+	pxa_init_irq_low();
+	pxa_init_irq_high();
+	pxa_init_irq_gpio(128);
+}
+
+/*
+ * device registration specific to PXA3xx.
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&pxa_device_mci,
+	&pxa_device_udc,
+	&pxa_device_fb,
+	&pxa_device_ffuart,
+	&pxa_device_btuart,
+	&pxa_device_stuart,
+	&pxa_device_i2c,
+	&pxa_device_i2s,
+	&pxa_device_ficp,
+	&pxa_device_rtc,
+};
+
+static int __init pxa3xx_init(void)
+{
+	int ret = 0;
+
+	if (cpu_is_pxa3xx()) {
+		clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
+
+		if ((ret = pxa_init_dma(32)))
+			return ret;
+
+		return platform_add_devices(devices, ARRAY_SIZE(devices));
+	}
+	return 0;
+}
+
+subsys_initcall(pxa3xx_init);
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 98d27e646b0..ec4286c7931 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -16,10 +16,48 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
+#include <linux/sched.h>
 
+#include <asm/div64.h>
+#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
+
+/*
+ * This is PXA's sched_clock implementation. This has a resolution
+ * of at least 308 ns and a maximum value of 208 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to sched_clock() which should always be the case in practice.
+ */
+
+#define OSCR2NS_SCALE_FACTOR 10
+
+static unsigned long oscr2ns_scale;
+
+static void __init set_oscr2ns_scale(unsigned long oscr_rate)
+{
+	unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR;
+	do_div(v, oscr_rate);
+	oscr2ns_scale = v;
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (oscr2ns_scale & 1)
+		oscr2ns_scale++;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(OSCR);
+	return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR;
+}
+
 
 static irqreturn_t
 pxa_ost0_interrupt(int irq, void *dev_id)
@@ -149,18 +187,29 @@ static struct irqaction pxa_ost0_irq = {
 
 static void __init pxa_timer_init(void)
 {
+	unsigned long clock_tick_rate;
+
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
+	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+		clock_tick_rate = 3686400;
+	else if (machine_is_mainstone())
+		clock_tick_rate = 3249600;
+	else
+		clock_tick_rate = 3250000;
+
+	set_oscr2ns_scale(clock_tick_rate);
+
 	ckevt_pxa_osmr0.mult =
-		div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
 		clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
 
 	cksrc_pxa_oscr0.mult =
-		clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift);
+		clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
 
 	setup_irq(IRQ_OST0, &pxa_ost0_irq);
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
new file mode 100644
index 00000000000..3f18d760dd1
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -0,0 +1,184 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite.c
+ *
+ * Support for the PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/zylonite.h>
+
+#include "generic.h"
+
+int gpio_backlight;
+int gpio_eth_irq;
+
+int lcd_id;
+int lcd_orientation;
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= ZYLONITE_ETH_PHYS + 0x300,
+		.end	= ZYLONITE_ETH_PHYS + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= -1,	/* for run-time assignment */
+		.end	= -1,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+static void zylonite_backlight_power(int on)
+{
+	gpio_set_value(gpio_backlight, on);
+}
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+	.pixclock		= 110000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 4,
+	.left_margin		= 6,
+	.right_margin		= 4,
+	.vsync_len		= 2,
+	.upper_margin		= 2,
+	.lower_margin		= 3,
+	.sync			= FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+	.pixclock		= 50000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 1,
+	.left_margin		= 0x9f,
+	.right_margin		= 1,
+	.vsync_len		= 44,
+	.upper_margin		= 0,
+	.lower_margin		= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
+	.num_modes      	= 1,
+	.lccr0			= LCCR0_Act,
+	.lccr3			= LCCR3_PCP,
+	.pxafb_backlight_power	= zylonite_backlight_power,
+};
+
+static struct pxafb_mode_info sharp_ls037_modes[] = {
+	[0] = {
+		.pixclock	= 158000,
+		.xres		= 240,
+		.yres		= 320,
+		.bpp		= 16,
+		.hsync_len	= 4,
+		.left_margin	= 39,
+		.right_margin	= 39,
+		.vsync_len	= 1,
+		.upper_margin	= 2,
+		.lower_margin	= 3,
+		.sync		= 0,
+	},
+	[1] = {
+		.pixclock	= 39700,
+		.xres		= 480,
+		.yres		= 640,
+		.bpp		= 16,
+		.hsync_len	= 8,
+		.left_margin	= 81,
+		.right_margin	= 81,
+		.vsync_len	= 1,
+		.upper_margin	= 2,
+		.lower_margin	= 7,
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info zylonite_sharp_lcd_info = {
+	.modes			= sharp_ls037_modes,
+	.num_modes		= 2,
+	.lccr0			= LCCR0_Act,
+	.lccr3			= LCCR3_PCP | LCCR3_HSP | LCCR3_VSP,
+	.pxafb_backlight_power	= zylonite_backlight_power,
+};
+
+static void __init zylonite_init_lcd(void)
+{
+	/* backlight GPIO: output, default on */
+	gpio_direction_output(gpio_backlight, 1);
+
+	if (lcd_id & 0x20) {
+		set_pxa_fb_info(&zylonite_sharp_lcd_info);
+		return;
+	}
+
+	/* legacy LCD panels, it would be handy here if LCD panel type can
+	 * be decided at run-time
+	 */
+	if (1)
+		zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
+	else
+		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
+
+	set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+}
+#else
+static inline void zylonite_init_lcd(void) {}
+#endif
+
+static void __init zylonite_init(void)
+{
+	/* board-processor specific initialization */
+	zylonite_pxa300_init();
+	zylonite_pxa320_init();
+
+	/*
+	 * Note: We depend that the bootloader set
+	 * the correct value to MSC register for SMC91x.
+	 */
+	smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
+	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
+	platform_device_register(&smc91x_device);
+
+	zylonite_init_lcd();
+}
+
+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= zylonite_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
new file mode 100644
index 00000000000..b5fbd2f4c69
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c
+ *
+ * PXA300/PXA310 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+/* PXA300/PXA310 common configurations */
+static mfp_cfg_t common_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+	GPIO76_LCD_VSYNC,
+	GPIO127_LCD_CS_N,
+
+	/* BTUART */
+	GPIO111_UART2_RTS,
+	GPIO112_UART2_RXD,
+	GPIO113_UART2_TXD,
+	GPIO114_UART2_CTS,
+
+	/* STUART */
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
+
+	/* AC97 */
+	GPIO23_AC97_nACRESET,
+	GPIO24_AC97_SYSCLK,
+	GPIO29_AC97_BITCLK,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+
+	/* Keypad */
+	GPIO107_KP_DKIN_0,
+	GPIO108_KP_DKIN_1,
+	GPIO115_KP_MKIN_0,
+	GPIO116_KP_MKIN_1,
+	GPIO117_KP_MKIN_2,
+	GPIO118_KP_MKIN_3,
+	GPIO119_KP_MKIN_4,
+	GPIO120_KP_MKIN_5,
+	GPIO2_2_KP_MKIN_6,
+	GPIO3_2_KP_MKIN_7,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO4_2_KP_MKOUT_5,
+	GPIO5_2_KP_MKOUT_6,
+	GPIO6_2_KP_MKOUT_7,
+};
+
+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
+	/* FFUART */
+	GPIO30_UART1_RXD,
+	GPIO31_UART1_TXD,
+	GPIO32_UART1_CTS,
+	GPIO37_UART1_RTS,
+	GPIO33_UART1_DCD,
+	GPIO34_UART1_DSR,
+	GPIO35_UART1_RI,
+	GPIO36_UART1_DTR,
+
+	/* Ethernet */
+	GPIO2_nCS3,
+	GPIO99_GPIO,
+};
+
+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
+	/* FFUART */
+	GPIO99_UART1_RXD,
+	GPIO100_UART1_TXD,
+	GPIO101_UART1_CTS,
+	GPIO106_UART1_RTS,
+
+	/* Ethernet */
+	GPIO2_nCS3,
+	GPIO102_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS	7
+
+static int lcd_detect_pins[] __initdata = {
+	MFP_PIN_GPIO71,	/* LCD_LDD_17 - ORIENT */
+	MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
+	MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
+	MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
+	MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
+	MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
+	MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+	unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
+	int i, gpio, id = 0;
+
+	/* save the original MFP settings of these pins and configure
+	 * them as GPIO Input, DS01X, Pull Neither, Edge Clear
+	 */
+	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+		pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
+	}
+
+	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+		id = id << 1;
+		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_direction_input(gpio);
+
+		if (gpio_get_value(gpio))
+			id = id | 0x1;
+	}
+
+	/* lcd id, flush out bit 1 */
+	lcd_id = id & 0x3d;
+
+	/* lcd orientation, portrait or landscape */
+	lcd_orientation = (id >> 6) & 0x1;
+
+	/* restore the original MFP settings */
+	for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
+		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310()) {
+		/* initialize MFP */
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
+
+		/* detect LCD panel */
+		zylonite_detect_lcd_panel();
+
+		/* GPIO pin assignment */
+		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+	}
+
+	if (cpu_is_pxa300()) {
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
+		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
+	}
+
+	if (cpu_is_pxa310()) {
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
+		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+	}
+}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
new file mode 100644
index 00000000000..63cb36be086
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -0,0 +1,173 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c
+ *
+ * PXA320 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mfp-pxa320.h>
+#include <asm/arch/zylonite.h>
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO6_2_LCD_LDD_0,
+	GPIO7_2_LCD_LDD_1,
+	GPIO8_2_LCD_LDD_2,
+	GPIO9_2_LCD_LDD_3,
+	GPIO10_2_LCD_LDD_4,
+	GPIO11_2_LCD_LDD_5,
+	GPIO12_2_LCD_LDD_6,
+	GPIO13_2_LCD_LDD_7,
+	GPIO63_LCD_LDD_8,
+	GPIO64_LCD_LDD_9,
+	GPIO65_LCD_LDD_10,
+	GPIO66_LCD_LDD_11,
+	GPIO67_LCD_LDD_12,
+	GPIO68_LCD_LDD_13,
+	GPIO69_LCD_LDD_14,
+	GPIO70_LCD_LDD_15,
+	GPIO71_LCD_LDD_16,
+	GPIO72_LCD_LDD_17,
+	GPIO73_LCD_CS_N,
+	GPIO74_LCD_VSYNC,
+	GPIO14_2_LCD_FCLK,
+	GPIO15_2_LCD_LCLK,
+	GPIO16_2_LCD_PCLK,
+	GPIO17_2_LCD_BIAS,
+
+	/* FFUART */
+	GPIO41_UART1_RXD,
+	GPIO42_UART1_TXD,
+	GPIO43_UART1_CTS,
+	GPIO44_UART1_DCD,
+	GPIO45_UART1_DSR,
+	GPIO46_UART1_RI,
+	GPIO47_UART1_DTR,
+	GPIO48_UART1_RTS,
+
+	/* AC97 */
+	GPIO34_AC97_SYSCLK,
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* Keypad */
+	GPIO105_KP_DKIN_0,
+	GPIO106_KP_DKIN_1,
+	GPIO113_KP_MKIN_0,
+	GPIO114_KP_MKIN_1,
+	GPIO115_KP_MKIN_2,
+	GPIO116_KP_MKIN_3,
+	GPIO117_KP_MKIN_4,
+	GPIO118_KP_MKIN_5,
+	GPIO119_KP_MKIN_6,
+	GPIO120_KP_MKIN_7,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO126_KP_MKOUT_5,
+	GPIO127_KP_MKOUT_6,
+	GPIO5_2_KP_MKOUT_7,
+
+	/* Ethernet */
+	GPIO4_nCS3,
+	GPIO90_GPIO,
+};
+
+#define NUM_LCD_DETECT_PINS	7
+
+static int lcd_detect_pins[] __initdata = {
+	MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
+	MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
+	MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
+	MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
+	MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
+	MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
+	MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
+	/*
+	 * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
+	 * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
+	 */
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO17,
+};
+
+static int lcd_detect_mfpr[] __initdata = {
+	/* AF0, DS 1X, Pull Neither, Edge Clear */
+	0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
+	0xc442, /* Backlight, Pull-Up, AF2 */
+	0x8445, /* AF5 */
+	0x8445, /* AF5 */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+	unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
+	int i, gpio, id = 0;
+
+	/* save the original MFP settings of these pins and configure them
+	 * as GPIO Input, DS01X, Pull Neither, Edge Clear
+	 */
+	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
+		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+		pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
+	}
+
+	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+		id = id << 1;
+		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_direction_input(gpio);
+
+		if (gpio_get_value(gpio))
+			id = id | 0x1;
+	}
+
+	/* lcd id, flush out bit 1 */
+	lcd_id = id & 0x3d;
+
+	/* lcd orientation, portrait or landscape */
+	lcd_orientation = (id >> 6) & 0x1;
+
+	/* restore the original MFP settings */
+	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
+		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa320_init(void)
+{
+	if (cpu_is_pxa320()) {
+		/* initialize MFP */
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+		/* detect LCD panel */
+		zylonite_detect_lcd_panel();
+
+		/* GPIO pin assignment */
+		gpio_backlight	= mfp_to_gpio(MFP_PIN_GPIO14);
+		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+	}
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 12161ae445d..7868f4dc1d0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -322,7 +322,7 @@ config CPU_SA1100
 # XScale
 config CPU_XSCALE
 	bool
-	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+	depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
@@ -333,7 +333,7 @@ config CPU_XSCALE
 # XScale Core Version 3
 config CPU_XSC3
 	bool
-	depends on ARCH_IXP23XX || ARCH_IOP13XX
+	depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index bb5466b27b5..00fad11733a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/i2c-pxa.h>
 #include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -48,6 +50,7 @@ struct pxa_i2c {
 	unsigned int		slave_addr;
 
 	struct i2c_adapter	adap;
+	struct clk		*clk;
 #ifdef CONFIG_I2C_PXA_SLAVE
 	struct i2c_slave_client *slave;
 #endif
@@ -869,6 +872,12 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
 
+	i2c->clk = clk_get(&dev->dev, "I2CCLK");
+	if (IS_ERR(i2c->clk)) {
+		ret = PTR_ERR(i2c->clk);
+		goto eclk;
+	}
+
 	i2c->reg_base = ioremap(res->start, res_len(res));
 	if (!i2c->reg_base) {
 		ret = -EIO;
@@ -889,22 +898,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	}
 #endif
 
+	clk_enable(i2c->clk);
+#ifdef CONFIG_PXA27x
 	switch (dev->id) {
 	case 0:
-#ifdef CONFIG_PXA27x
 		pxa_gpio_mode(GPIO117_I2CSCL_MD);
 		pxa_gpio_mode(GPIO118_I2CSDA_MD);
-#endif
-		pxa_set_cken(CKEN_I2C, 1);
 		break;
-#ifdef CONFIG_PXA27x
 	case 1:
 		local_irq_disable();
 		PCFR |= PCFR_PI2CEN;
 		local_irq_enable();
-		pxa_set_cken(CKEN_PWRI2C, 1);
-#endif
 	}
+#endif
 
 	ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
 			  i2c->adap.name, i2c);
@@ -948,19 +954,18 @@ static int i2c_pxa_probe(struct platform_device *dev)
 eadapt:
 	free_irq(irq, i2c);
 ereqirq:
-	switch (dev->id) {
-	case 0:
-		pxa_set_cken(CKEN_I2C, 0);
-		break;
+	clk_disable(i2c->clk);
+
 #ifdef CONFIG_PXA27x
-	case 1:
-		pxa_set_cken(CKEN_PWRI2C, 0);
+	if (dev->id == 1) {
 		local_irq_disable();
 		PCFR &= ~PCFR_PI2CEN;
 		local_irq_enable();
-#endif
 	}
+#endif
 eremap:
+	clk_put(i2c->clk);
+eclk:
 	kfree(i2c);
 emalloc:
 	release_mem_region(res->start, res_len(res));
@@ -975,18 +980,18 @@ static int i2c_pxa_remove(struct platform_device *dev)
 
 	i2c_del_adapter(&i2c->adap);
 	free_irq(i2c->irq, i2c);
-	switch (dev->id) {
-	case 0:
-		pxa_set_cken(CKEN_I2C, 0);
-		break;
+
+	clk_disable(i2c->clk);
+	clk_put(i2c->clk);
+
 #ifdef CONFIG_PXA27x
-	case 1:
-		pxa_set_cken(CKEN_PWRI2C, 0);
+	if (dev->id == 1) {
 		local_irq_disable();
 		PCFR &= ~PCFR_PI2CEN;
 		local_irq_enable();
-#endif
 	}
+#endif
+
 	release_mem_region(i2c->iobase, i2c->iosize);
 	kfree(i2c);
 
diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c
index ebe5eacf299..b7061aa3881 100644
--- a/drivers/input/keyboard/pxa27x_keyboard.c
+++ b/drivers/input/keyboard/pxa27x_keyboard.c
@@ -23,6 +23,8 @@
 #include <linux/input.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,6 +42,8 @@
 				 col/2 == 2 ? KPASMKP2 : KPASMKP3)
 #define KPASMKPx_MKC(row, col)	(1 << (row + 16 * (col % 2)))
 
+static struct clk *pxakbd_clk;
+
 static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
@@ -104,7 +108,7 @@ static int pxakbd_open(struct input_dev *dev)
 	KPREC = 0x7F;
 
 	/* Enable unit clock */
-	pxa_set_cken(CKEN_KEYPAD, 1);
+	clk_enable(pxakbd_clk);
 
 	return 0;
 }
@@ -112,7 +116,7 @@ static int pxakbd_open(struct input_dev *dev)
 static void pxakbd_close(struct input_dev *dev)
 {
 	/* Disable clock unit */
-	pxa_set_cken(CKEN_KEYPAD, 0);
+	clk_disable(pxakbd_clk);
 }
 
 #ifdef CONFIG_PM
@@ -140,7 +144,8 @@ static int pxakbd_resume(struct platform_device *pdev)
 		KPREC = pdata->reg_kprec;
 
 		/* Enable unit clock */
-		pxa_set_cken(CKEN_KEYPAD, 1);
+		clk_disable(pxakbd_clk);
+		clk_enable(pxakbd_clk);
 	}
 
 	mutex_unlock(&input_dev->mutex);
@@ -158,11 +163,18 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	int i, row, col, error;
 
+	pxakbd_clk = clk_get(&pdev->dev, "KBDCLK");
+	if (IS_ERR(pxakbd_clk)) {
+		error = PTR_ERR(pxakbd_clk);
+		goto err_clk;
+	}
+
 	/* Create and register the input driver. */
 	input_dev = input_allocate_device();
 	if (!input_dev) {
 		printk(KERN_ERR "Cannot request keypad device\n");
-		return -ENOMEM;
+		error = -ENOMEM;
+		goto err_alloc;
 	}
 
 	input_dev->name = DRIVER_NAME;
@@ -185,7 +197,6 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
 			    DRIVER_NAME, pdev);
 	if (error) {
 		printk(KERN_ERR "Cannot request keypad IRQ\n");
-		pxa_set_cken(CKEN_KEYPAD, 0);
 		goto err_free_dev;
 	}
 
@@ -217,6 +228,9 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
 	free_irq(IRQ_KEYPAD, pdev);
  err_free_dev:
 	input_free_device(input_dev);
+ err_alloc:
+	clk_put(pxakbd_clk);
+ err_clk:
 	return error;
 }
 
@@ -226,6 +240,7 @@ static int __devexit pxakbd_remove(struct platform_device *pdev)
 
 	input_unregister_device(input_dev);
 	free_irq(IRQ_KEYPAD, pdev);
+	clk_put(pxakbd_clk);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3cb23210b91..257b44094e4 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -108,6 +108,12 @@ config LEDS_GPIO
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
+config LEDS_CM_X270
+	tristate "LED Support for the CM-X270 LEDs"
+	depends on LEDS_CLASS && MACH_ARMCORE
+	help
+	  This option enables support for the CM-X270 LEDs.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d2ca1abbc3d..a60de1b46c2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
new file mode 100644
index 00000000000..9aebef02a97
--- /dev/null
+++ b/drivers/leds/leds-cm-x270.c
@@ -0,0 +1,122 @@
+/*
+ * drivers/leds/leds-cm-x270.c
+ *
+ * Copyright 2007 CompuLab Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on leds-corgi.c
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#define GPIO_RED_LED			(93)
+#define GPIO_GREEN_LED			(94)
+
+static void cmx270_red_set(struct led_classdev *led_cdev,
+			   enum led_brightness value)
+{
+	if (value)
+		GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
+	else
+		GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
+}
+
+static void cmx270_green_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
+{
+	if (value)
+		GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
+	else
+		GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
+}
+
+static struct led_classdev cmx270_red_led = {
+	.name			= "cm-x270:red",
+	.default_trigger	= "nand-disk",
+	.brightness_set		= cmx270_red_set,
+};
+
+static struct led_classdev cmx270_green_led = {
+	.name			= "cm-x270:green",
+	.default_trigger	= "heartbeat",
+	.brightness_set		= cmx270_green_set,
+};
+
+#ifdef CONFIG_PM
+static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
+{
+	led_classdev_suspend(&cmx270_red_led);
+	led_classdev_suspend(&cmx270_green_led);
+	return 0;
+}
+
+static int cmx270led_resume(struct platform_device *dev)
+{
+	led_classdev_resume(&cmx270_red_led);
+	led_classdev_resume(&cmx270_green_led);
+	return 0;
+}
+#endif
+
+static int cmx270led_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
+	if (ret < 0)
+		return ret;
+
+	ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
+	if (ret < 0)
+		led_classdev_unregister(&cmx270_red_led);
+
+	return ret;
+}
+
+static int cmx270led_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&cmx270_red_led);
+	led_classdev_unregister(&cmx270_green_led);
+	return 0;
+}
+
+static struct platform_driver cmx270led_driver = {
+	.probe		= cmx270led_probe,
+	.remove		= cmx270led_remove,
+#ifdef CONFIG_PM
+	.suspend	= cmx270led_suspend,
+	.resume		= cmx270led_resume,
+#endif
+	.driver		= {
+		.name		= "cm-x270-led",
+	},
+};
+
+static int __init cmx270led_init(void)
+{
+	return platform_driver_register(&cmx270led_driver);
+}
+
+static void __exit cmx270led_exit(void)
+{
+	platform_driver_unregister(&cmx270led_driver);
+}
+
+module_init(cmx270led_init);
+module_exit(cmx270led_exit);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x270 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 657901eecfc..0601e01aa2c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/mmc/host.h>
 
 #include <asm/dma.h>
@@ -44,6 +46,8 @@ struct pxamci_host {
 	spinlock_t		lock;
 	struct resource		*res;
 	void __iomem		*base;
+	struct clk		*clk;
+	unsigned long		clkrate;
 	int			irq;
 	int			dma;
 	unsigned int		clkrt;
@@ -119,7 +123,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	writel(nob, host->base + MMC_NOB);
 	writel(data->blksz, host->base + MMC_BLKLEN);
 
-	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
+	clks = (unsigned long long)data->timeout_ns * host->clkrate;
 	do_div(clks, 1000000000UL);
 	timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
 	writel((timeout + 255) / 256, host->base + MMC_RDTO);
@@ -365,18 +369,25 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct pxamci_host *host = mmc_priv(mmc);
 
 	if (ios->clock) {
-		unsigned int clk = CLOCKRATE / ios->clock;
-		if (CLOCKRATE / clk > ios->clock)
+		unsigned long rate = host->clkrate;
+		unsigned int clk = rate / ios->clock;
+
+		/*
+		 * clk might result in a lower divisor than we
+		 * desire.  check for that condition and adjust
+		 * as appropriate.
+		 */
+		if (rate / clk > ios->clock)
 			clk <<= 1;
 		host->clkrt = fls(clk) - 1;
-		pxa_set_cken(CKEN_MMC, 1);
+		clk_enable(host->clk);
 
 		/*
 		 * we write clkrt on the next command
 		 */
 	} else {
 		pxamci_stop_clock(host);
-		pxa_set_cken(CKEN_MMC, 0);
+		clk_disable(host->clk);
 	}
 
 	if (host->power_mode != ios->power_mode) {
@@ -462,8 +473,6 @@ static int pxamci_probe(struct platform_device *pdev)
 	}
 
 	mmc->ops = &pxamci_ops;
-	mmc->f_min = CLOCKRATE_MIN;
-	mmc->f_max = CLOCKRATE_MAX;
 
 	/*
 	 * We can do SG-DMA, but we don't because we never know how much
@@ -490,6 +499,22 @@ static int pxamci_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dma = -1;
 	host->pdata = pdev->dev.platform_data;
+
+	host->clk = clk_get(&pdev->dev, "MMCCLK");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto out;
+	}
+
+	host->clkrate = clk_get_rate(host->clk);
+
+	/*
+	 * Calculate minimum clock rate, rounding up.
+	 */
+	mmc->f_min = (host->clkrate + 63) / 64;
+	mmc->f_max = host->clkrate;
+
 	mmc->ocr_avail = host->pdata ?
 			 host->pdata->ocr_mask :
 			 MMC_VDD_32_33|MMC_VDD_33_34;
@@ -554,6 +579,8 @@ static int pxamci_probe(struct platform_device *pdev)
 			iounmap(host->base);
 		if (host->sg_cpu)
 			dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+		if (host->clk)
+			clk_put(host->clk);
 	}
 	if (mmc)
 		mmc_free_host(mmc);
@@ -588,6 +615,8 @@ static int pxamci_remove(struct platform_device *pdev)
 		iounmap(host->base);
 		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
 
+		clk_put(host->clk);
+
 		release_resource(host->res);
 
 		mmc_free_host(mmc);
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index 3153e779d46..748c7706f23 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -88,17 +88,3 @@
 #define MMC_RXFIFO	0x0040	/* 8 bit */
 
 #define MMC_TXFIFO	0x0044	/* 8 bit */
-
-/*
- * The base MMC clock rate
- */
-#ifdef CONFIG_PXA27x
-#define CLOCKRATE_MIN	304688
-#define CLOCKRATE_MAX	19500000
-#else
-#define CLOCKRATE_MIN	312500
-#define CLOCKRATE_MAX	20000000
-#endif
-
-#define CLOCKRATE	CLOCKRATE_MAX
-
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 55ff0fbe525..8c09344f58d 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,6 +23,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
+#include <linux/clk.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
@@ -87,8 +88,30 @@ struct pxa_irda {
 
 	struct device		*dev;
 	struct pxaficp_platform_data *pdata;
+	struct clk		*fir_clk;
+	struct clk		*sir_clk;
+	struct clk		*cur_clk;
 };
 
+static inline void pxa_irda_disable_clk(struct pxa_irda *si)
+{
+	if (si->cur_clk)
+		clk_disable(si->cur_clk);
+	si->cur_clk = NULL;
+}
+
+static inline void pxa_irda_enable_firclk(struct pxa_irda *si)
+{
+	si->cur_clk = si->fir_clk;
+	clk_enable(si->fir_clk);
+}
+
+static inline void pxa_irda_enable_sirclk(struct pxa_irda *si)
+{
+	si->cur_clk = si->sir_clk;
+	clk_enable(si->sir_clk);
+}
+
 
 #define IS_FIR(si)		((si)->speed >= 4000000)
 #define IRDA_FRAME_SIZE_LIMIT	2047
@@ -134,7 +157,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
 			DCSR(si->rxdma) &= ~DCSR_RUN;
 			/* disable FICP */
 			ICCR0 = 0;
-			pxa_set_cken(CKEN_FICP, 0);
+			pxa_irda_disable_clk(si);
 
 			/* set board transceiver to SIR mode */
 			si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
@@ -144,7 +167,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
 			pxa_gpio_mode(GPIO47_STTXD_MD);
 
 			/* enable the STUART clock */
-			pxa_set_cken(CKEN_STUART, 1);
+			pxa_irda_enable_sirclk(si);
 		}
 
 		/* disable STUART first */
@@ -169,7 +192,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
 		/* disable STUART */
 		STIER = 0;
 		STISR = 0;
-		pxa_set_cken(CKEN_STUART, 0);
+		pxa_irda_disable_clk(si);
 
 		/* disable FICP first */
 		ICCR0 = 0;
@@ -182,7 +205,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
 		pxa_gpio_mode(GPIO47_ICPTXD_MD);
 
 		/* enable the FICP clock */
-		pxa_set_cken(CKEN_FICP, 1);
+		pxa_irda_enable_firclk(si);
 
 		si->speed = speed;
 		pxa_irda_fir_dma_rx_start(si);
@@ -592,16 +615,15 @@ static void pxa_irda_shutdown(struct pxa_irda *si)
 	STIER = 0;
 	/* disable STUART SIR mode */
 	STISR = 0;
-	/* disable the STUART clock */
-	pxa_set_cken(CKEN_STUART, 0);
 
 	/* disable DMA */
 	DCSR(si->txdma) &= ~DCSR_RUN;
 	DCSR(si->rxdma) &= ~DCSR_RUN;
 	/* disable FICP */
 	ICCR0 = 0;
-	/* disable the FICP clock */
-	pxa_set_cken(CKEN_FICP, 0);
+
+	/* disable the STUART or FICP clocks */
+	pxa_irda_disable_clk(si);
 
 	DRCMR17 = 0;
 	DRCMR18 = 0;
@@ -792,6 +814,13 @@ static int pxa_irda_probe(struct platform_device *pdev)
 	si->dev = &pdev->dev;
 	si->pdata = pdev->dev.platform_data;
 
+	si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
+	si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
+	if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
+		err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk);
+		goto err_mem_4;
+	}
+
 	/*
 	 * Initialise the SIR buffers
 	 */
@@ -831,6 +860,10 @@ static int pxa_irda_probe(struct platform_device *pdev)
 err_mem_5:
 		kfree(si->rx_buff.head);
 err_mem_4:
+		if (si->sir_clk && !IS_ERR(si->sir_clk))
+			clk_put(si->sir_clk);
+		if (si->fir_clk && !IS_ERR(si->fir_clk))
+			clk_put(si->fir_clk);
 		free_netdev(dev);
 err_mem_3:
 		release_mem_region(__PREG(FICP), 0x1c);
@@ -850,6 +883,8 @@ static int pxa_irda_remove(struct platform_device *_dev)
 		unregister_netdev(dev);
 		kfree(si->tx_buff.head);
 		kfree(si->rx_buff.head);
+		clk_put(si->fir_clk);
+		clk_put(si->sir_clk);
 		free_netdev(dev);
 	}
 
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 24e610e711e..7da7589d45d 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -173,49 +173,6 @@ MODULE_LICENSE("GPL");
  */
 #define MII_DELAY		1
 
-/* store this information for the driver.. */
-struct smc_local {
-	/*
-	 * If I have to wait until memory is available to send a
-	 * packet, I will store the skbuff here, until I get the
-	 * desired memory.  Then, I'll send it out and free it.
-	 */
-	struct sk_buff *pending_tx_skb;
-	struct tasklet_struct tx_task;
-
-	/* version/revision of the SMC91x chip */
-	int	version;
-
-	/* Contains the current active transmission mode */
-	int	tcr_cur_mode;
-
-	/* Contains the current active receive mode */
-	int	rcr_cur_mode;
-
-	/* Contains the current active receive/phy mode */
-	int	rpc_cur_mode;
-	int	ctl_rfduplx;
-	int	ctl_rspeed;
-
-	u32	msg_enable;
-	u32	phy_type;
-	struct mii_if_info mii;
-
-	/* work queue */
-	struct work_struct phy_configure;
-	struct net_device *dev;
-	int	work_pending;
-
-	spinlock_t lock;
-
-#ifdef SMC_USE_PXA_DMA
-	/* DMA needs the physical address of the chip */
-	u_long physaddr;
-#endif
-	void __iomem *base;
-	void __iomem *datacs;
-};
-
 #if SMC_DEBUG > 0
 #define DBG(n, args...)					\
 	do {						\
@@ -2215,17 +2172,19 @@ static int smc_drv_probe(struct platform_device *pdev)
 		goto out_release_attrib;
 	}
 
-	platform_set_drvdata(pdev, ndev);
-	ret = smc_probe(ndev, addr);
-	if (ret != 0)
-		goto out_iounmap;
 #ifdef SMC_USE_PXA_DMA
-	else {
+	{
 		struct smc_local *lp = netdev_priv(ndev);
+		lp->device = &pdev->dev;
 		lp->physaddr = res->start;
 	}
 #endif
 
+	platform_set_drvdata(pdev, ndev);
+	ret = smc_probe(ndev, addr);
+	if (ret != 0)
+		goto out_iounmap;
+
 	smc_request_datacs(pdev, ndev);
 
 	return 0;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index af9e6bf5955..729fd28c08b 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -462,6 +462,52 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #endif
 
+
+/* store this information for the driver.. */
+struct smc_local {
+	/*
+	 * If I have to wait until memory is available to send a
+	 * packet, I will store the skbuff here, until I get the
+	 * desired memory.  Then, I'll send it out and free it.
+	 */
+	struct sk_buff *pending_tx_skb;
+	struct tasklet_struct tx_task;
+
+	/* version/revision of the SMC91x chip */
+	int	version;
+
+	/* Contains the current active transmission mode */
+	int	tcr_cur_mode;
+
+	/* Contains the current active receive mode */
+	int	rcr_cur_mode;
+
+	/* Contains the current active receive/phy mode */
+	int	rpc_cur_mode;
+	int	ctl_rfduplx;
+	int	ctl_rspeed;
+
+	u32	msg_enable;
+	u32	phy_type;
+	struct mii_if_info mii;
+
+	/* work queue */
+	struct work_struct phy_configure;
+	struct net_device *dev;
+	int	work_pending;
+
+	spinlock_t lock;
+
+#ifdef SMC_USE_PXA_DMA
+	/* DMA needs the physical address of the chip */
+	u_long physaddr;
+	struct device *device;
+#endif
+	void __iomem *base;
+	void __iomem *datacs;
+};
+
+
 #ifdef SMC_USE_PXA_DMA
 /*
  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
@@ -476,11 +522,12 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #ifdef SMC_insl
 #undef SMC_insl
 #define SMC_insl(a, r, p, l) \
-	smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
+	smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
 static inline void
-smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
 		 u_char *buf, int len)
 {
+	u_long physaddr = lp->physaddr;
 	dma_addr_t dmabuf;
 
 	/* fallback if no DMA available */
@@ -497,7 +544,7 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
 	}
 
 	len *= 4;
-	dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+	dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
 	DCSR(dma) = DCSR_NODESC;
 	DTADR(dma) = dmabuf;
 	DSADR(dma) = physaddr + reg;
@@ -507,18 +554,19 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
 	while (!(DCSR(dma) & DCSR_STOPSTATE))
 		cpu_relax();
 	DCSR(dma) = 0;
-	dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+	dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
 }
 #endif
 
 #ifdef SMC_insw
 #undef SMC_insw
 #define SMC_insw(a, r, p, l) \
-	smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
+	smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
 static inline void
-smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
 		 u_char *buf, int len)
 {
+	u_long physaddr = lp->physaddr;
 	dma_addr_t dmabuf;
 
 	/* fallback if no DMA available */
@@ -535,7 +583,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
 	}
 
 	len *= 2;
-	dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+	dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
 	DCSR(dma) = DCSR_NODESC;
 	DTADR(dma) = dmabuf;
 	DSADR(dma) = physaddr + reg;
@@ -545,7 +593,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
 	while (!(DCSR(dma) & DCSR_STOPSTATE))
 		cpu_relax();
 	DCSR(dma) = 0;
-	dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+	dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
 }
 #endif
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 4276965517f..dc7a4cb5d27 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -69,4 +69,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock.o sa1111_generic.o
 pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
+pxa2xx_cs-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x270.o
 
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
new file mode 100644
index 00000000000..fbf2f3a6984
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -0,0 +1,175 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <pcmcia/ss.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/cm-x270.h>
+
+#include "soc_common.h"
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+	{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+};
+
+static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) |
+		GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) |
+		GPIO_bit(GPIO85_nPCE_1) |
+		GPIO_bit(GPIO54_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO85_nPCE_1_MD);
+	pxa_gpio_mode(GPIO54_nPCE_2_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+
+	/* Reset signal */
+	pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
+	GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+
+	set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
+
+	/* irq's for slots: */
+	set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
+
+	skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+	set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
+	set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
+
+	set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
+	set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
+}
+
+
+static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				       struct pcmcia_state *state)
+{
+	state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
+	state->ready  = (PCC_READY(skt->nr) == 0) ? 0 : 1;
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->vs_3v  = 0;
+	state->vs_Xv  = 0;
+	state->wrprot = 0;  /* not available */
+}
+
+
+static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					  const socket_state_t *state)
+{
+	GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+	pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
+
+	switch (skt->nr) {
+	case 0:
+		if (state->flags & SS_RESET) {
+			GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+			GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+			udelay(10);
+			GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+			GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+		}
+		break;
+	case 1:
+		if (state->flags & SS_RESET) {
+			GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+			GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+			udelay(10);
+			GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+			GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+		}
+		break;
+	}
+
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+
+	return 0;
+}
+
+static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+
+static struct pcmcia_low_level cmx270_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= cmx270_pcmcia_hw_init,
+	.hw_shutdown		= cmx270_pcmcia_shutdown,
+	.socket_state		= cmx270_pcmcia_socket_state,
+	.configure_socket	= cmx270_pcmcia_configure_socket,
+	.socket_init		= cmx270_pcmcia_socket_init,
+	.socket_suspend		= cmx270_pcmcia_socket_suspend,
+	.nr			= 2,
+};
+
+static struct platform_device *cmx270_pcmcia_device;
+
+static int __init cmx270_pcmcia_init(void)
+{
+	int ret;
+
+	cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
+	if (!cmx270_pcmcia_device)
+		return -ENOMEM;
+
+	cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
+
+	printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
+	ret = platform_device_add(cmx270_pcmcia_device);
+
+	if (ret)
+		platform_device_put(cmx270_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit cmx270_pcmcia_exit(void)
+{
+	platform_device_unregister(cmx270_pcmcia_device);
+}
+
+module_init(cmx270_pcmcia_init);
+module_exit(cmx270_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x270 PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 5e9b9a3fd02..1510d6cde3e 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -30,35 +30,6 @@
 #include "sa1111_generic.h"
 
 static int
-lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	/*
-	 * Setup default state of GPIO outputs
-	 * before we enable them as outputs.
-	 */
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
-	return sa1111_pcmcia_hw_init(skt);
-}
-
-static int
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				const socket_state_t *state)
 {
@@ -230,7 +201,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
 	.owner			= THIS_MODULE,
-	.hw_init		= lubbock_pcmcia_hw_init,
+	.hw_init		= sa1111_pcmcia_hw_init,
 	.hw_shutdown		= sa1111_pcmcia_hw_shutdown,
 	.socket_state		= sa1111_pcmcia_socket_state,
 	.configure_socket	= lubbock_pcmcia_configure_socket,
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 383107ba4bd..36c671c5fb6 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -43,24 +43,6 @@ static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	 * Setup default state of GPIO outputs
 	 * before we enable them as outputs.
 	 */
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO85_nPCE_1) |
-		GPIO_bit(GPIO54_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO79_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
 
 	skt->irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index e9c6cb391a2..af3a011b2b2 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -42,6 +42,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
@@ -55,7 +56,7 @@ struct uart_pxa_port {
 	unsigned char           lcr;
 	unsigned char           mcr;
 	unsigned int            lsr_break_flag;
-	unsigned int		cken;
+	struct clk		*clk;
 	char			*name;
 };
 
@@ -351,6 +352,8 @@ static int serial_pxa_startup(struct uart_port *port)
 	else
 		up->mcr = 0;
 
+	up->port.uartclk = clk_get_rate(up->clk);
+
 	/*
 	 * Allocate the IRQ
 	 */
@@ -546,9 +549,11 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	pxa_set_cken(up->cken, !state);
+
 	if (!state)
-		udelay(1);
+		clk_enable(up->clk);
+	else
+		clk_disable(up->clk);
 }
 
 static void serial_pxa_release_port(struct uart_port *port)
@@ -582,7 +587,7 @@ serial_pxa_type(struct uart_port *port)
 
 #ifdef CONFIG_SERIAL_PXA_CONSOLE
 
-static struct uart_pxa_port serial_pxa_ports[];
+static struct uart_pxa_port *serial_pxa_ports[4];
 static struct uart_driver serial_pxa_reg;
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -632,9 +637,11 @@ static void serial_pxa_console_putchar(struct uart_port *port, int ch)
 static void
 serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
-	struct uart_pxa_port *up = &serial_pxa_ports[co->index];
+	struct uart_pxa_port *up = serial_pxa_ports[co->index];
 	unsigned int ier;
 
+	clk_enable(up->clk);
+
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
@@ -649,6 +656,8 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 	 */
 	wait_for_xmitr(up);
 	serial_out(up, UART_IER, ier);
+
+	clk_disable(up->clk);
 }
 
 static int __init
@@ -662,7 +671,9 @@ serial_pxa_console_setup(struct console *co, char *options)
 
 	if (co->index == -1 || co->index >= serial_pxa_reg.nr)
 		co->index = 0;
-       	up = &serial_pxa_ports[co->index];
+	up = serial_pxa_ports[co->index];
+	if (!up)
+		return -ENODEV;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -680,15 +691,6 @@ static struct console serial_pxa_console = {
 	.data		= &serial_pxa_reg,
 };
 
-static int __init
-serial_pxa_console_init(void)
-{
-	register_console(&serial_pxa_console);
-	return 0;
-}
-
-console_initcall(serial_pxa_console_init);
-
 #define PXA_CONSOLE	&serial_pxa_console
 #else
 #define PXA_CONSOLE	NULL
@@ -714,73 +716,13 @@ struct uart_ops serial_pxa_pops = {
 	.verify_port	= serial_pxa_verify_port,
 };
 
-static struct uart_pxa_port serial_pxa_ports[] = {
-     {	/* FFUART */
-	.name	= "FFUART",
-	.cken	= CKEN_FFUART,
-	.port	= {
-		.type		= PORT_PXA,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.fifosize	= 64,
-		.ops		= &serial_pxa_pops,
-		.line		= 0,
-	},
-  }, {	/* BTUART */
-	.name	= "BTUART",
-	.cken	= CKEN_BTUART,
-	.port	= {
-		.type		= PORT_PXA,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.fifosize	= 64,
-		.ops		= &serial_pxa_pops,
-		.line		= 1,
-	},
-  }, {	/* STUART */
-	.name	= "STUART",
-	.cken	= CKEN_STUART,
-	.port	= {
-		.type		= PORT_PXA,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.fifosize	= 64,
-		.ops		= &serial_pxa_pops,
-		.line		= 2,
-	},
-  }, {  /* HWUART */
-	.name	= "HWUART",
-	.cken	= CKEN_HWUART,
-	.port = {
-		.type		= PORT_PXA,
-		.iotype		= UPIO_MEM,
-		.membase	= (void *)&HWUART,
-		.mapbase	= __PREG(HWUART),
-		.irq		= IRQ_HWUART,
-		.uartclk	= 921600 * 16,
-		.fifosize	= 64,
-		.ops		= &serial_pxa_pops,
-		.line		= 3,
-	},
-  }
-};
-
 static struct uart_driver serial_pxa_reg = {
 	.owner		= THIS_MODULE,
 	.driver_name	= "PXA serial",
 	.dev_name	= "ttyS",
 	.major		= TTY_MAJOR,
 	.minor		= 64,
-	.nr		= ARRAY_SIZE(serial_pxa_ports),
+	.nr		= 4,
 	.cons		= PXA_CONSOLE,
 };
 
@@ -806,10 +748,68 @@ static int serial_pxa_resume(struct platform_device *dev)
 
 static int serial_pxa_probe(struct platform_device *dev)
 {
-	serial_pxa_ports[dev->id].port.dev = &dev->dev;
-	uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
-	platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
+	struct uart_pxa_port *sport;
+	struct resource *mmres, *irqres;
+	int ret;
+
+	mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+	if (!sport)
+		return -ENOMEM;
+
+	sport->clk = clk_get(&dev->dev, "UARTCLK");
+	if (IS_ERR(sport->clk)) {
+		ret = PTR_ERR(sport->clk);
+		goto err_free;
+	}
+
+	sport->port.type = PORT_PXA;
+	sport->port.iotype = UPIO_MEM;
+	sport->port.mapbase = mmres->start;
+	sport->port.irq = irqres->start;
+	sport->port.fifosize = 64;
+	sport->port.ops = &serial_pxa_pops;
+	sport->port.line = dev->id;
+	sport->port.dev = &dev->dev;
+	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+	sport->port.uartclk = clk_get_rate(sport->clk);
+
+	/*
+	 * Is it worth keeping this?
+	 */
+	if (mmres->start == __PREG(FFUART))
+		sport->name = "FFUART";
+	else if (mmres->start == __PREG(BTUART))
+		sport->name = "BTUART";
+	else if (mmres->start == __PREG(STUART))
+		sport->name = "STUART";
+	else if (mmres->start == __PREG(HWUART))
+		sport->name = "HWUART";
+	else
+		sport->name = "???";
+
+	sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
+	if (!sport->port.membase) {
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+
+	serial_pxa_ports[dev->id] = sport;
+
+	uart_add_one_port(&serial_pxa_reg, &sport->port);
+	platform_set_drvdata(dev, sport);
+
 	return 0;
+
+ err_clk:
+	clk_put(sport->clk);
+ err_free:
+	kfree(sport);
+	return ret;
 }
 
 static int serial_pxa_remove(struct platform_device *dev)
@@ -818,8 +818,9 @@ static int serial_pxa_remove(struct platform_device *dev)
 
 	platform_set_drvdata(dev, NULL);
 
-	if (sport)
-		uart_remove_one_port(&serial_pxa_reg, &sport->port);
+	uart_remove_one_port(&serial_pxa_reg, &sport->port);
+	clk_put(sport->clk);
+	kfree(sport);
 
 	return 0;
 }
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index a055f58f342..a3bd3a3f41f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2127,6 +2127,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
+		 * If this driver supports console, and it hasn't been
+		 * successfully registered yet, try to re-register it.
+		 * It may be that the port was not available.
+		 */
+		if (port->cons && !(port->cons->flags & CON_ENABLED))
+			register_console(port->cons);
+
+		/*
 		 * Power down all ports by default, except the
 		 * console if we have one.
 		 */
@@ -2286,6 +2294,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	}
 
 	state->port = port;
+	state->pm_state = -1;
 
 	port->cons = drv->cons;
 	port->info = state->info;
@@ -2308,15 +2317,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	tty_register_device(drv->tty_driver, port->line, port->dev);
 
 	/*
-	 * If this driver supports console, and it hasn't been
-	 * successfully registered yet, try to re-register it.
-	 * It may be that the port was not available.
-	 */
-	if (port->type != PORT_UNKNOWN &&
-	    port->cons && !(port->cons->flags & CON_ENABLED))
-		register_console(port->cons);
-
-	/*
 	 * Ensure UPF_DEAD is not set.
 	 */
 	port->flags &= ~UPF_DEAD;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1407ad1c812..90d0d086b9b 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -43,6 +43,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/byteorder.h>
 #include <asm/dma.h>
@@ -1157,7 +1159,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
 
 #ifdef	CONFIG_ARCH_PXA
         /* Disable clock for USB device */
-	pxa_set_cken(CKEN_USB, 0);
+	clk_disable(dev->clk);
 #endif
 
 	ep0_idle (dev);
@@ -1202,8 +1204,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
 
 #ifdef	CONFIG_ARCH_PXA
         /* Enable clock for USB device */
-	pxa_set_cken(CKEN_USB, 1);
-	udelay(5);
+	clk_enable(dev->clk);
 #endif
 
 	/* try to clear these bits before we enable the udc */
@@ -2137,6 +2138,14 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENODEV;
 
+#ifdef	CONFIG_ARCH_PXA
+	dev->clk = clk_get(&pdev->dev, "UDCCLK");
+	if (IS_ERR(dev->clk)) {
+		retval = PTR_ERR(dev->clk);
+		goto err_clk;
+	}
+#endif
+
 	pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
 		dev->has_cfr ? "" : " (!cfr)",
 		SIZE_STR "(pio)"
@@ -2152,11 +2161,10 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 			dev_dbg(&pdev->dev,
 				"can't get vbus gpio %d, err: %d\n",
 				dev->mach->gpio_vbus, retval);
-			return -EBUSY;
+			goto err_gpio_vbus;
 		}
 		gpio_direction_input(dev->mach->gpio_vbus);
 		vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
-		set_irq_type(vbus_irq, IRQT_BOTHEDGE);
 	} else
 		vbus_irq = 0;
 
@@ -2166,9 +2174,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 			dev_dbg(&pdev->dev,
 				"can't get pullup gpio %d, err: %d\n",
 				dev->mach->gpio_pullup, retval);
-			if (dev->mach->gpio_vbus)
-				gpio_free(dev->mach->gpio_vbus);
-			return -EBUSY;
+			goto err_gpio_pullup;
 		}
 		gpio_direction_output(dev->mach->gpio_pullup, 0);
 	}
@@ -2195,11 +2201,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 	if (retval != 0) {
 		printk(KERN_ERR "%s: can't get irq %d, err %d\n",
 			driver_name, irq, retval);
-		if (dev->mach->gpio_pullup)
-			gpio_free(dev->mach->gpio_pullup);
-		if (dev->mach->gpio_vbus)
-			gpio_free(dev->mach->gpio_vbus);
-		return -EBUSY;
+		goto err_irq1;
 	}
 	dev->got_irq = 1;
 
@@ -2213,12 +2215,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 			printk(KERN_ERR "%s: can't get irq %i, err %d\n",
 				driver_name, LUBBOCK_USB_DISC_IRQ, retval);
 lubbock_fail0:
-			free_irq(irq, dev);
-			if (dev->mach->gpio_pullup)
-				gpio_free(dev->mach->gpio_pullup);
-			if (dev->mach->gpio_vbus)
-				gpio_free(dev->mach->gpio_vbus);
-			return -EBUSY;
+			goto err_irq_lub;
 		}
 		retval = request_irq(LUBBOCK_USB_IRQ,
 				lubbock_vbus_irq,
@@ -2234,22 +2231,37 @@ lubbock_fail0:
 #endif
 	if (vbus_irq) {
 		retval = request_irq(vbus_irq, udc_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				driver_name, dev);
 		if (retval != 0) {
 			printk(KERN_ERR "%s: can't get irq %i, err %d\n",
 				driver_name, vbus_irq, retval);
-			free_irq(irq, dev);
-			if (dev->mach->gpio_pullup)
-				gpio_free(dev->mach->gpio_pullup);
-			if (dev->mach->gpio_vbus)
-				gpio_free(dev->mach->gpio_vbus);
-			return -EBUSY;
+			goto err_vbus_irq;
 		}
 	}
 	create_proc_files();
 
 	return 0;
+
+ err_vbus_irq:
+#ifdef	CONFIG_ARCH_LUBBOCK
+	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
+ err_irq_lub:
+#endif
+	free_irq(irq, dev);
+ err_irq1:
+	if (dev->mach->gpio_pullup)
+		gpio_free(dev->mach->gpio_pullup);
+ err_gpio_pullup:
+	if (dev->mach->gpio_vbus)
+		gpio_free(dev->mach->gpio_vbus);
+ err_gpio_vbus:
+#ifdef	CONFIG_ARCH_PXA
+	clk_put(dev->clk);
+ err_clk:
+#endif
+	return retval;
 }
 
 static void pxa2xx_udc_shutdown(struct platform_device *_dev)
@@ -2284,6 +2296,10 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
 	if (dev->mach->gpio_pullup)
 		gpio_free(dev->mach->gpio_pullup);
 
+#ifdef	CONFIG_ARCH_PXA
+	clk_put(dev->clk);
+#endif
+
 	platform_set_drvdata(pdev, NULL);
 	the_controller = NULL;
 	return 0;
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 0e5d0e6fb0e..1db46d70577 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -125,6 +125,7 @@ struct pxa2xx_udc {
 	struct timer_list			timer;
 
 	struct device				*dev;
+	struct clk				*clk;
 	struct pxa2xx_udc_mach_info		*mach;
 	u64					dma_mask;
 	struct pxa2xx_ep			ep [PXA_UDC_NUM_ENDPOINTS];
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index a280a52f8ef..f9b12ab5964 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -37,6 +37,8 @@
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -506,15 +508,15 @@ static struct fb_ops pxafb_ops = {
  *
  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
  */
-static inline unsigned int get_pcd(unsigned int pixclock)
+static inline unsigned int get_pcd(struct pxafb_info *fbi, unsigned int pixclock)
 {
 	unsigned long long pcd;
 
 	/* FIXME: Need to take into account Double Pixel Clock mode
-         * (DPC) bit? or perhaps set it based on the various clock
-         * speeds */
-
-	pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
+	 * (DPC) bit? or perhaps set it based on the various clock
+	 * speeds */
+	pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000);
+	pcd *= pixclock;
 	do_div(pcd, 100000000 * 2);
 	/* no need for this, since we should subtract 1 anyway. they cancel */
 	/* pcd += 1; */ /* make up for integer math truncations */
@@ -523,19 +525,21 @@ static inline unsigned int get_pcd(unsigned int pixclock)
 
 /*
  * Some touchscreens need hsync information from the video driver to
- * function correctly. We export it here.
+ * function correctly. We export it here.  Note that 'hsync_time' and
+ * the value returned from pxafb_get_hsync_time() is the *reciprocal*
+ * of the hsync period in seconds.
  */
 static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
 {
-	unsigned long long htime;
+	unsigned long htime;
 
 	if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
 		fbi->hsync_time=0;
 		return;
 	}
 
-	htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000;
-	do_div(htime, pcd * fbi->fb.var.hsync_len);
+	htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len);
+
 	fbi->hsync_time = htime;
 }
 
@@ -560,7 +564,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *
 {
 	struct pxafb_lcd_reg new_regs;
 	u_long flags;
-	u_int lines_per_panel, pcd = get_pcd(var->pixclock);
+	u_int lines_per_panel, pcd = get_pcd(fbi, var->pixclock);
 
 	pr_debug("pxafb: Configuring PXA LCD\n");
 
@@ -803,7 +807,7 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
 	/* enable LCD controller clock */
-	pxa_set_cken(CKEN_LCD, 1);
+	clk_enable(fbi->clk);
 
 	/* Sequence from 11.7.10 */
 	LCCR3 = fbi->reg_lccr3;
@@ -840,7 +844,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
 
 	/* disable LCD controller clock */
-	pxa_set_cken(CKEN_LCD, 0);
+	clk_disable(fbi->clk);
 }
 
 /*
@@ -994,7 +998,7 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 		break;
 
 	case CPUFREQ_POSTCHANGE:
-		pcd = get_pcd(fbi->fb.var.pixclock);
+		pcd = get_pcd(fbi, fbi->fb.var.pixclock);
 		set_hsync_time(fbi, pcd);
 		fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
 		set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
@@ -1119,6 +1123,12 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
 	memset(fbi, 0, sizeof(struct pxafb_info));
 	fbi->dev = dev;
 
+	fbi->clk = clk_get(dev, "LCDCLK");
+	if (IS_ERR(fbi->clk)) {
+		kfree(fbi);
+		return NULL;
+	}
+
 	strcpy(fbi->fb.fix.id, PXA_NAME);
 
 	fbi->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 7499a1c4bf7..f8605b807b0 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -40,6 +40,7 @@ struct pxafb_dma_descriptor {
 struct pxafb_info {
 	struct fb_info		fb;
 	struct device		*dev;
+	struct clk		*clk;
 
 	/*
 	 * These are the addresses we mapped
diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
new file mode 100644
index 00000000000..f8fac9e1800
--- /dev/null
+++ b/include/asm-arm/arch-pxa/cm-x270.h
@@ -0,0 +1,50 @@
+/*
+ * linux/include/asm/arch-pxa/cm-x270.h
+ *
+ * Copyright Compulab Ltd., 2003, 2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* CM-x270 device physical addresses */
+#define CMX270_CS1_PHYS		(PXA_CS1_PHYS)
+#define MARATHON_PHYS		(PXA_CS2_PHYS)
+#define CMX270_IDE104_PHYS	(PXA_CS3_PHYS)
+#define CMX270_IT8152_PHYS	(PXA_CS4_PHYS)
+
+/* Statically mapped regions */
+#define CMX270_VIRT_BASE		(0xe8000000)
+#define CMX270_IT8152_VIRT		(CMX270_VIRT_BASE)
+#define CMX270_IDE104_VIRT		(CMX270_IT8152_VIRT + SZ_64M)
+
+/* GPIO related definitions */
+#define GPIO_IT8152_IRQ			(22)
+
+#define IRQ_GPIO_IT8152_IRQ	IRQ_GPIO(GPIO_IT8152_IRQ)
+#define PME_IRQ			IRQ_GPIO(0)
+#define CMX270_IDE_IRQ		IRQ_GPIO(100)
+#define CMX270_GPIRQ1		IRQ_GPIO(101)
+#define CMX270_TOUCHIRQ		IRQ_GPIO(96)
+#define CMX270_ETHIRQ		IRQ_GPIO(10)
+#define CMX270_GFXIRQ		IRQ_GPIO(95)
+#define CMX270_NANDIRQ		IRQ_GPIO(89)
+#define CMX270_MMC_IRQ		IRQ_GPIO(83)
+
+/* PCMCIA related definitions */
+#define PCC_DETECT(x)	(GPLR(84 - (x)) & GPIO_bit(84 - (x)))
+#define PCC_READY(x)	(GPLR(82 - (x)) & GPIO_bit(82 - (x)))
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(84)
+#define PCMCIA_S0_CD_VALID_EDGE		GPIO_BOTH_EDGES
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(83)
+#define PCMCIA_S1_CD_VALID_EDGE		GPIO_BOTH_EDGES
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(82)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(81)
+
+#define PCMCIA_RESET_GPIO		53
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
index 3280ee2ddfa..dbe110ee266 100644
--- a/include/asm-arm/arch-pxa/dma.h
+++ b/include/asm-arm/arch-pxa/dma.h
@@ -30,6 +30,10 @@ typedef enum {
 	DMA_PRIO_LOW = 2
 } pxa_dma_prio;
 
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
 /*
  * DMA registration
  */
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
index 9e99241f3ed..9dbc2dc794f 100644
--- a/include/asm-arm/arch-pxa/gpio.h
+++ b/include/asm-arm/arch-pxa/gpio.h
@@ -38,16 +38,8 @@ static inline void gpio_free(unsigned gpio)
 	return;
 }
 
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return pxa_gpio_mode(gpio | GPIO_IN);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return pxa_gpio_mode(gpio | GPIO_OUT |
-                         (value ? GPIO_DFLT_HIGH : GPIO_DFLT_LOW));
-}
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
 
 static inline int __gpio_get_value(unsigned gpio)
 {
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index 38612174641..ab2d963e742 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -62,6 +62,7 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_PXA25x
 #define __cpu_is_pxa21x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xf3f;	\
@@ -73,12 +74,50 @@
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x2d0 || _id == 0x290;		\
 	})
+#else
+#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
 
+#ifdef CONFIG_PXA27x
 #define __cpu_is_pxa27x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x411;				\
 	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
 
 #define cpu_is_pxa21x()					\
 	({						\
@@ -98,6 +137,53 @@
 		__cpu_is_pxa27x(id);			\
 	})
 
+#define cpu_is_pxa300()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa300(id);			\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa310(id);			\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa320(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa2xx(id);			\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa3xx(id);			\
+	 })
+
 /*
  * Handy routine to set GPIO alternate functions
  */
@@ -116,14 +202,23 @@ extern void pxa_gpio_set_value(unsigned gpio, int value);
 /*
  * Routine to enable or disable CKEN
  */
-extern void pxa_set_cken(int clock, int enable);
+static inline void __deprecated pxa_set_cken(int clock, int enable)
+{
+	extern void __pxa_set_cken(int clock, int enable);
+	__pxa_set_cken(clock, enable);
+}
 
 /*
  * return current memory and LCD clock frequency in units of 10kHz
  */
 extern unsigned int get_memclk_frequency_10khz(void);
-extern unsigned int get_lcdclk_frequency_10khz(void);
 
 #endif
 
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index a07fe0f928c..6238dbf7a23 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -66,12 +66,6 @@
 #define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
 #define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
-#if defined(CONFIG_PXA25x)
-#define PXA_LAST_GPIO	84
-#elif defined(CONFIG_PXA27x)
-#define PXA_LAST_GPIO	127
-#endif
-
 /*
  * The next 16 interrupts are for board specific purposes.  Since
  * the kernel can only run on one machine at a time, we can re-use
@@ -216,3 +210,24 @@
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
 #define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
 #define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
index e17f9881faf..bee81d66c18 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -39,4 +39,14 @@
  */
 #define NODE_MEM_SIZE_BITS	26
 
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
new file mode 100644
index 00000000000..7513c7a3402
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa300.h
@@ -0,0 +1,574 @@
+/*
+ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <asm/arch/mfp.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS01X)
+#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
new file mode 100644
index 00000000000..ae8ba34194c
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa320.h
@@ -0,0 +1,446 @@
+/*
+ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <asm/arch/mfp.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
new file mode 100644
index 00000000000..60291742ffd
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp.h
@@ -0,0 +1,576 @@
+/*
+ * linux/include/asm-arm/arch-pxa/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.y.miao@gmail.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define MFPR_BASE	(0x40e10000)
+#define MFPR_SIZE	(PAGE_SIZE)
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14d)   (bit 13d)
+ *
+ * Drive 0          0          0           0           X (1)      0
+ * Drive 1          0          1           X (1)       0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFP_LPM_DRIVE_LOW	0x8
+#define MFP_LPM_DRIVE_HIGH    	0x6
+#define MFP_LPM_PULL_HIGH     	0x7
+#define MFP_LPM_PULL_LOW      	0x9
+#define MFP_LPM_FLOAT         	0x1
+#define MFP_LPM_PULL_NEITHER	0x0
+
+/*
+ * The pullup and pulldown state of the MFP pin is by default determined by
+ * selected alternate function. In case some buggy devices need to override
+ * this default behavior,  pxa3xx_mfp_set_pull() can be invoked with one of
+ * the following definition as the parameter.
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFP_PULL_HIGH        1         1        0
+ * MFP_PULL_LOW         1         0        1
+ * MFP_PULL_BOTH        1         1        1
+ * MFP_PULL_NONE        1         0        0
+ * MFP_PULL_DEFAULT     0         X        X
+ *
+ * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN
+ * bits,  which will cause potential conflicts with the low power mode
+ * setting, device drivers should take care of this
+ */
+#define MFP_PULL_BOTH		(0x7u)
+#define MFP_PULL_HIGH		(0x6u)
+#define MFP_PULL_LOW		(0x5u)
+#define MFP_PULL_NONE		(0x4u)
+#define MFP_PULL_DEFAULT	(0x0u)
+
+#define MFP_AF0			(0)
+#define MFP_AF1			(1)
+#define MFP_AF2			(2)
+#define MFP_AF3			(3)
+#define MFP_AF4			(4)
+#define MFP_AF5			(5)
+#define MFP_AF6			(6)
+#define MFP_AF7			(7)
+
+#define MFP_DS01X		(0)
+#define MFP_DS02X		(1)
+#define MFP_DS03X		(2)
+#define MFP_DS04X		(3)
+#define MFP_DS06X		(4)
+#define MFP_DS08X		(5)
+#define MFP_DS10X		(6)
+#define MFP_DS12X		(7)
+
+#define MFP_EDGE_BOTH		0x3
+#define MFP_EDGE_RISE		0x2
+#define MFP_EDGE_FALL		0x1
+#define MFP_EDGE_NONE		0x0
+
+#define MFPR_AF_MASK		0x0007
+#define MFPR_DRV_MASK		0x1c00
+#define MFPR_RDH_MASK		0x0200
+#define MFPR_LPM_MASK		0xe180
+#define MFPR_PULL_MASK		0xe000
+#define MFPR_EDGE_MASK		0x0070
+
+#define MFPR_ALT_OFFSET		0
+#define MFPR_ERE_OFFSET		4
+#define MFPR_EFE_OFFSET		5
+#define MFPR_EC_OFFSET		6
+#define MFPR_SON_OFFSET		7
+#define MFPR_SD_OFFSET		8
+#define MFPR_SS_OFFSET		9
+#define MFPR_DRV_OFFSET		10
+#define MFPR_PD_OFFSET		13
+#define MFPR_PU_OFFSET		14
+#define MFPR_PS_OFFSET		15
+
+#define MFPR(af, drv, rdh, lpm, edge) \
+	(((af) & 0x7) | (((drv) & 0x7) << 10) |\
+	 (((rdh) & 0x1) << 9) |\
+	 (((lpm) & 0x3) << 7) |\
+	 (((lpm) & 0x4) << 12)|\
+	 (((lpm) & 0x8) << 10)|\
+	 ((!(edge)) << 6) |\
+	 (((edge) & 0x1) << 5) |\
+	 (((edge) & 0x2) << 3))
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ * bit  0..15 - MFPR value (16-bit)
+ * bit 16..31 - mfp pin index (used to obtain the MFPR offset)
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFPR_DEFAULT - default MFPR value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 1mA (MFP_DS01X)
+ * 		  low power mode = default
+ * 		  release dalay hold = false (RDH bit)
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ *
+ * use
+ *
+ * MFP_CFG_PIN	- to get the MFP pin index
+ * MFP_CFG_VAL	- to get the corresponding MFPR value
+ */
+
+typedef uint32_t mfp_cfg_t;
+
+#define MFP_CFG_PIN(mfp_cfg)	(((mfp_cfg) >> 16) & 0xffff)
+#define MFP_CFG_VAL(mfp_cfg)	((mfp_cfg) & 0xffff)
+
+#define MFPR_DEFAULT	(0x0000)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+	 ((MFP_##drv) << 10) | (MFP_##af))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\
+	 (((MFP_LPM_##lpm) & 0x3) << 7)  |\
+	 (((MFP_LPM_##lpm) & 0x4) << 12) |\
+	 (((MFP_LPM_##lpm) & 0x8) << 10))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+	 ((MFP_##drv) << 10) | (MFP_##af) |\
+	 (((MFP_LPM_##lpm) & 0x3) << 7)  |\
+	 (((MFP_LPM_##lpm) & 0x4) << 12) |\
+	 (((MFP_LPM_##lpm) & 0x8) << 10))
+
+/* common MFP configurations - processor specific ones defined
+ * in mfp-pxa3xx.h
+ */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+struct pxa3xx_mfp_pin {
+	unsigned long	mfpr_off;	/* MFPRxx register offset */
+	unsigned long	mfpr_val;	/* MFPRxx register value */
+};
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
+ * pxa3xx_mfp_set_rdh  - set MFP release delay hold on/off
+ * pxa3xx_mfp_set_lpm  - set MFP low power mode state
+ * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
+ *
+ * use these functions to override/change the default configuration
+ * done by pxa3xx_mfp_set_config(s)
+ */
+void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
+void pxa3xx_mfp_set_rdh(int mfp, int rdh);
+void pxa3xx_mfp_set_lpm(int mfp, int lpm);
+void pxa3xx_mfp_set_edge(int mfp, int edge);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index e68b593d69d..67f53e07db8 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1177,7 +1177,7 @@
 
 #define GPIO_bit(x)	(1 << ((x) & 0x1f))
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 
 /* Interrupt Controller */
 
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
new file mode 100644
index 00000000000..3900a0ca0bc
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h
@@ -0,0 +1,75 @@
+/*
+ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
index 2473bb51d0a..8d882f0b6a1 100644
--- a/include/asm-arm/arch-pxa/timex.h
+++ b/include/asm-arm/arch-pxa/timex.h
@@ -21,4 +21,6 @@
 #else
 #define CLOCK_TICK_RATE 3250000
 #endif
+#else
+#define CLOCK_TICK_RATE 3250000
 #endif
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
new file mode 100644
index 00000000000..f58b59162b8
--- /dev/null
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS	0x14000000
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+extern int gpio_backlight;
+extern int gpio_eth_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+	if (cpu_is_pxa320())
+		panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
new file mode 100644
index 00000000000..aaebb61aca4
--- /dev/null
+++ b/include/asm-arm/hardware/it8152.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/arm/hardware/it8152.h
+ *
+ * Copyright Compulab Ltd., 2006,2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * ITE 8152 companion chip register definitions
+ */
+
+#ifndef __ASM_HARDWARE_IT8152_H
+#define __ASM_HARDWARE_IT8152_H
+extern unsigned long it8152_base_address;
+
+#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
+#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
+
+#define __REG_IT8152(x)			(it8152_base_address + (x))
+
+#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
+#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
+
+#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
+#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
+#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
+#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
+#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
+#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
+#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
+#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
+#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
+#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
+#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
+#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
+#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
+#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
+#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
+#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
+#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
+#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
+#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
+
+#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
+
+/*
+  Interrup contoler per register summary:
+  ---------------------------------------
+  LCDNIRR:
+  IT8152_LD_IRQ(8) PCICLK stop
+  IT8152_LD_IRQ(7) MCLK ready
+  IT8152_LD_IRQ(6) s/w
+  IT8152_LD_IRQ(5) UART
+  IT8152_LD_IRQ(4) GPIO
+  IT8152_LD_IRQ(3) TIMER 4
+  IT8152_LD_IRQ(2) TIMER 3
+  IT8152_LD_IRQ(1) TIMER 2
+  IT8152_LD_IRQ(0) TIMER 1
+
+  LPCNIRR:
+  IT8152_LP_IRQ(x) serial IRQ x
+
+  PCIDNIRR:
+  IT8152_PD_IRQ(14) PCISERR
+  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
+  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
+  IT8152_PD_IRQ(11) PCI INTD
+  IT8152_PD_IRQ(10) PCI INTC
+  IT8152_PD_IRQ(9)  PCI INTB
+  IT8152_PD_IRQ(8)  PCI INTA
+  IT8152_PD_IRQ(7)  serial INTD
+  IT8152_PD_IRQ(6)  serial INTC
+  IT8152_PD_IRQ(5)  serial INTB
+  IT8152_PD_IRQ(4)  serial INTA
+  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
+  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
+  IT8152_PD_IRQ(1)  USB (USBR)
+  IT8152_PD_IRQ(0)  Audio controller (ACR)
+ */
+/* frequently used interrupts */
+#define IT8152_PCISERR		IT8152_PD_IRQ(14)
+#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
+#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
+#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
+#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
+#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
+#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
+#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
+#define IT8152_USB_INT		IT8152_PD_IRQ(1)
+#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
+
+struct pci_dev;
+struct pci_sys_data;
+
+extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
+extern void it8152_init_irq(void);
+extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+
+#endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
index ed3f898191f..75feb1574a6 100644
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -8,10 +8,17 @@
 
 #define pcibios_scan_all_fns(a, b)	0
 
+#ifdef CONFIG_PCI_HOST_ITE8152
+/* ITE bridge requires setting latency timer to avoid early bus access
+   termination by PIC bus mater devices
+*/
+extern void pcibios_set_master(struct pci_dev *dev);
+#else
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
 	/* No special bus mastering setup handling */
 }
+#endif
 
 static inline void pcibios_penalize_isa_irq(int irq, int active)
 {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3948708c42c..2bcb02d555e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1631,6 +1631,7 @@
 #define PCI_DEVICE_ID_ITE_8211		0x8211
 #define PCI_DEVICE_ID_ITE_8212		0x8212
 #define PCI_DEVICE_ID_ITE_8213		0x8213
+#define PCI_DEVICE_ID_ITE_8152		0x8152
 #define PCI_DEVICE_ID_ITE_8872		0x8872
 #define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886