aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBrett Russ <russb@emc.com>2005-10-05 17:08:53 -0400
committerJeff Garzik <jgarzik@pobox.com>2005-10-05 17:16:52 -0400
commit05b308e1df6d9d673daedb517969241f41278b52 (patch)
treeb7114fdbddb7fef974744a5281896c9e6bf6c1d4
parentafb0edd922c7ed6e73678730921dfcccebec17e8 (diff)
[PATCH] libata: Marvell function headers
adds helpful function header comments. Signed-off-by: Brett Russ <russb@emc.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-rw-r--r--drivers/scsi/sata_mv.c225
1 files changed, 219 insertions, 6 deletions
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index c3084f8b3ee..84b488f81c7 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -35,7 +35,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.23"
+#define DRV_VERSION "0.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -406,6 +406,17 @@ static void mv_irq_clear(struct ata_port *ap)
{
}
+/**
+ * mv_start_dma - Enable eDMA engine
+ * @base: port base address
+ * @pp: port private data
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
{
if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
@@ -415,6 +426,16 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
}
+/**
+ * mv_stop_dma - Disable eDMA engine
+ * @ap: ATA channel to manipulate
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_stop_dma(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
@@ -561,7 +582,15 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
}
}
-/* This routine only applies to 6xxx parts */
+/**
+ * mv_global_soft_reset - Perform the 6xxx global soft reset
+ * @mmio_base: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_global_soft_reset(void __iomem *mmio_base)
{
void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS;
@@ -617,6 +646,16 @@ done:
return rc;
}
+/**
+ * mv_host_stop - Host specific cleanup/stop routine.
+ * @host_set: host data structure
+ *
+ * Disable ints, cleanup host memory, call general purpose
+ * host_stop.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_host_stop(struct ata_host_set *host_set)
{
struct mv_host_priv *hpriv = host_set->private_data;
@@ -631,6 +670,16 @@ static void mv_host_stop(struct ata_host_set *host_set)
ata_host_stop(host_set);
}
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -699,6 +748,15 @@ static int mv_port_start(struct ata_port *ap)
return 0;
}
+/**
+ * mv_port_stop - Port specific cleanup/stop routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Stop DMA, cleanup port memory.
+ *
+ * LOCKING:
+ * This routine uses the host_set lock to protect the DMA stop.
+ */
static void mv_port_stop(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -714,6 +772,15 @@ static void mv_port_stop(struct ata_port *ap)
kfree(pp);
}
+/**
+ * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
+ * @qc: queued command whose SG list to source from
+ *
+ * Populate the SG list and mark the last entry.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_fill_sg(struct ata_queued_cmd *qc)
{
struct mv_port_priv *pp = qc->ap->private_data;
@@ -748,6 +815,18 @@ static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
(last ? CRQB_CMD_LAST : 0);
}
+/**
+ * mv_qc_prep - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -830,6 +909,18 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
mv_fill_sg(qc);
}
+/**
+ * mv_qc_issue - Initiate a command to the host
+ * @qc: queued command to start
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it sanity checks our local
+ * caches of the request producer/consumer indices then enables
+ * DMA and bumps the request producer index.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_qc_issue(struct ata_queued_cmd *qc)
{
void __iomem *port_mmio = mv_ap_base(qc->ap);
@@ -867,6 +958,19 @@ static int mv_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
+/**
+ * mv_get_crpb_status - get status from most recently completed cmd
+ * @ap: ATA channel to manipulate
+ *
+ * This routine is for use when the port is in DMA mode, when it
+ * will be using the CRPB (command response block) method of
+ * returning command completion information. We assert indices
+ * are good, grab status, and bump the response consumer index to
+ * prove that we're up to date.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static u8 mv_get_crpb_status(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
@@ -896,6 +1000,19 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
}
+/**
+ * mv_err_intr - Handle error interrupts on the port
+ * @ap: ATA channel to manipulate
+ *
+ * In most cases, just clear the interrupt and move on. However,
+ * some cases require an eDMA reset, which is done right before
+ * the COMRESET in mv_phy_reset(). The SERR case requires a
+ * clear of pending errors in the SATA SERROR register. Finally,
+ * if the port disabled DMA, update our cached copy to match.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_err_intr(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
@@ -923,7 +1040,22 @@ static void mv_err_intr(struct ata_port *ap)
}
}
-/* Handle any outstanding interrupts in a single SATAHC */
+/**
+ * mv_host_intr - Handle all interrupts on the given host controller
+ * @host_set: host specific structure
+ * @relevant: port error bits relevant to this host controller
+ * @hc: which host controller we're to look at
+ *
+ * Read then write clear the HC interrupt status then walk each
+ * port connected to the HC and see if it needs servicing. Port
+ * success ints are reported in the HC interrupt status reg, the
+ * port error ints are reported in the higher level main
+ * interrupt status register and thus are passed in via the
+ * 'relevant' argument.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
unsigned int hc)
{
@@ -993,6 +1125,21 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
VPRINTK("EXIT\n");
}
+/**
+ * mv_interrupt -
+ * @irq: unused
+ * @dev_instance: private data; in this case the host structure
+ * @regs: unused
+ *
+ * Read the read only register to determine if any host
+ * controllers have pending interrupts. If so, call lower level
+ * routine to handle. Also check for PCI errors which are only
+ * reported here.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while processing pending
+ * interrupts.
+ */
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs)
{
@@ -1035,14 +1182,32 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
return IRQ_RETVAL(handled);
}
+/**
+ * mv_check_err - Return the error shadow register to caller.
+ * @ap: ATA channel to manipulate
+ *
+ * Marvell requires DMA to be stopped before accessing shadow
+ * registers. So we do that, then return the needed register.
+ *
+ * LOCKING:
+ * Inherited from caller. FIXME: protect mv_stop_dma with lock?
+ */
static u8 mv_check_err(struct ata_port *ap)
{
mv_stop_dma(ap); /* can't read shadow regs if DMA on */
return readb((void __iomem *) ap->ioaddr.error_addr);
}
-/* Part of this is taken from __sata_phy_reset and modified to not sleep
- * since this routine gets called from interrupt level.
+/**
+ * mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * @ap: ATA channel to manipulate
+ *
+ * Part of this is taken from __sata_phy_reset and modified to
+ * not sleep since this routine gets called from interrupt level.
+ *
+ * LOCKING:
+ * Inherited from caller. This is coded to safe to call at
+ * interrupt level, i.e. it does not sleep.
*/
static void mv_phy_reset(struct ata_port *ap)
{
@@ -1105,6 +1270,16 @@ static void mv_phy_reset(struct ata_port *ap)
VPRINTK("EXIT\n");
}
+/**
+ * mv_eng_timeout - Routine called by libata when SCSI times out I/O
+ * @ap: ATA channel to manipulate
+ *
+ * Intent is to clear all pending error conditions, reset the
+ * chip/bus, fail the command, and move on.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while failing the command.
+ */
static void mv_eng_timeout(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
@@ -1140,6 +1315,18 @@ static void mv_eng_timeout(struct ata_port *ap)
}
}
+/**
+ * mv_port_init - Perform some early initialization on a single port.
+ * @port: libata data structure storing shadow register addresses
+ * @port_mmio: base address of the port
+ *
+ * Initialize shadow register mmio addresses, clear outstanding
+ * interrupts on the port, and unmask interrupts for the future
+ * start of the port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
{
unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
@@ -1177,6 +1364,16 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+/**
+ * mv_host_init - Perform some early initialization of the host.
+ * @probe_ent: early data struct representing the host
+ *
+ * If possible, do an early global reset of the host. Then do
+ * our port init and clear/unmask all/relevant host interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_host_init(struct ata_probe_ent *probe_ent)
{
int rc = 0, n_hc, port, hc;
@@ -1226,7 +1423,15 @@ done:
return rc;
}
-/* FIXME: complete this */
+/**
+ * mv_print_info - Dump key info to kernel log for perusal.
+ * @probe_ent: early data struct representing the host
+ *
+ * FIXME: complete this.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_print_info(struct ata_probe_ent *probe_ent)
{
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
@@ -1253,6 +1458,14 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
+/**
+ * mv_init_one - handle a positive probe of a Marvell host
+ * @pdev: PCI device found
+ * @ent: PCI device ID entry for the matched host
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;