aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlan <alan@lxorguk.ukuu.org.uk>2006-11-22 17:26:06 +0000
committerJeff Garzik <jeff@garzik.org>2006-12-01 22:46:44 -0500
commit34d8dfb1e6b51dbd6eefcb449b531c7ee773664c (patch)
treeafc35f1f602340be69c6c66f10b0133a8624580f
parentd39ca896fb9a25f80465d3e52872cf5c510762a8 (diff)
[PATCH] pata_ali: suspend/resume support
Various chipset functions must be reprogrammed on a resume from RAM, without this things like ATAPI DMA stop working on resume with some chipset variants. Split the chipset programming and init time method selection into two functions. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r--drivers/ata/pata_ali.c135
1 files changed, 84 insertions, 51 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index e6d2b840e87..ae6d573574c 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.6.6"
+#define DRV_VERSION "0.7.1"
/*
* Cable special cases
@@ -348,6 +348,8 @@ static struct scsi_host_template ali_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
/*
@@ -497,6 +499,69 @@ static struct ata_port_operations ali_c5_port_ops = {
.host_stop = ata_host_stop
};
+
+/**
+ * ali_init_chipset - chip setup function
+ * @pdev: PCI device of ATA controller
+ *
+ * Perform the setup on the device that must be done both at boot
+ * and at resume time.
+ */
+
+static void ali_init_chipset(struct pci_dev *pdev)
+{
+ u8 rev, tmp;
+ struct pci_dev *north, *isa_bridge;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+
+ /*
+ * The chipset revision selects the driver operations and
+ * mode data.
+ */
+
+ if (rev >= 0x20 && rev < 0xC2) {
+ /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ /* Clear CD-ROM DMA write bit */
+ tmp &= 0x7F;
+ pci_write_config_byte(pdev, 0x4B, tmp);
+ } else if (rev >= 0xC2) {
+ /* Enable cable detection logic */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
+ }
+ north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+ if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+ /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+ Set the south bridge enable bit */
+ pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ if (rev == 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ else if (rev > 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ }
+ if (rev >= 0x20) {
+ /*
+ * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
+ * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
+ * via 0x54/55.
+ */
+ pci_read_config_byte(pdev, 0x53, &tmp);
+ if (rev <= 0x20)
+ tmp &= ~0x02;
+ if (rev >= 0xc7)
+ tmp |= 0x03;
+ else
+ tmp |= 0x01; /* CD_ROM enable for DMA */
+ pci_write_config_byte(pdev, 0x53, tmp);
+ }
+ pci_dev_put(isa_bridge);
+ pci_dev_put(north);
+ ata_pci_clear_simplex(pdev);
+}
/**
* ali_init_one - discovery callback
* @pdev: PCI device ID
@@ -570,7 +635,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static struct ata_port_info *port_info[2];
u8 rev, tmp;
- struct pci_dev *north, *isa_bridge;
+ struct pci_dev *isa_bridge;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
@@ -582,11 +647,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rev < 0x20) {
port_info[0] = port_info[1] = &info_early;
} else if (rev < 0xC2) {
- /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
- pci_read_config_byte(pdev, 0x4B, &tmp);
- /* Clear CD-ROM DMA write bit */
- tmp &= 0x7F;
- pci_write_config_byte(pdev, 0x4B, tmp);
port_info[0] = port_info[1] = &info_20;
} else if (rev == 0xC2) {
port_info[0] = port_info[1] = &info_c2;
@@ -597,54 +657,25 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
} else
port_info[0] = port_info[1] = &info_c5;
- if (rev >= 0xC2) {
- /* Enable cable detection logic */
- pci_read_config_byte(pdev, 0x4B, &tmp);
- pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
- }
-
- north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
+ ali_init_chipset(pdev);
+
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
- if (north && north->vendor == PCI_VENDOR_ID_AL) {
- /* Configure the ALi bridge logic. For non ALi rely on BIOS.
- Set the south bridge enable bit */
- pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (rev == 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (rev > 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+ /* Are we paired with a UDMA capable chip */
+ pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+ if ((tmp & 0x1E) == 0x12)
+ port_info[0] = port_info[1] = &info_20_udma;
+ pci_dev_put(isa_bridge);
}
-
- if (rev >= 0x20) {
- if (rev < 0xC2) {
- /* Are we paired with a UDMA capable chip */
- pci_read_config_byte(isa_bridge, 0x5E, &tmp);
- if ((tmp & 0x1E) == 0x12)
- port_info[0] = port_info[1] = &info_20_udma;
- }
- /*
- * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
- * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
- * via 0x54/55.
- */
- pci_read_config_byte(pdev, 0x53, &tmp);
- if (rev <= 0x20)
- tmp &= ~0x02;
- if (rev >= 0xc7)
- tmp |= 0x03;
- else
- tmp |= 0x01; /* CD_ROM enable for DMA */
- pci_write_config_byte(pdev, 0x53, tmp);
- }
-
- pci_dev_put(isa_bridge);
- pci_dev_put(north);
-
- ata_pci_clear_simplex(pdev);
return ata_pci_init_one(pdev, port_info, 2);
}
+static int ali_reinit_one(struct pci_dev *pdev)
+{
+ ali_init_chipset(pdev);
+ return ata_pci_device_resume(pdev);
+}
+
static const struct pci_device_id ali[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
@@ -656,7 +687,9 @@ static struct pci_driver ali_pci_driver = {
.name = DRV_NAME,
.id_table = ali,
.probe = ali_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ali_reinit_one,
};
static int __init ali_init(void)