aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Woodhouse <dwmw2@shinybook.infradead.org>2005-05-17 12:04:46 +0100
committerDavid Woodhouse <dwmw2@shinybook.infradead.org>2005-05-17 12:04:46 +0100
commit69887ac1dcb79dfc773dabac2dd081fa6d6e2573 (patch)
tree23a4f685c71ff8666548b0a01b221928e46a9287
parent5e014b10ef8477c32a939a48fa02aedcad35a226 (diff)
parent118326e940bdecef6c459d42ccf05256ba86daa7 (diff)
Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
-rw-r--r--arch/arm/mach-s3c2410/clock.c2
-rw-r--r--arch/arm/mach-s3c2410/s3c2440.c6
-rw-r--r--arch/arm/mm/Kconfig21
-rw-r--r--arch/arm/mm/copypage-v4mc.S80
-rw-r--r--arch/arm/mm/copypage-v4mc.c111
-rw-r--r--arch/arm/mm/copypage-v6.c28
-rw-r--r--arch/arm/mm/flush.c37
-rw-r--r--arch/arm/mm/mm-armv.c27
-rw-r--r--drivers/block/ioctl.c2
-rw-r--r--drivers/block/pktcdvd.c4
-rw-r--r--drivers/char/raw.c2
-rw-r--r--drivers/mmc/Kconfig2
-rw-r--r--drivers/mmc/wbsd.c716
-rw-r--r--drivers/mmc/wbsd.h12
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/ibm_emac/ibm_emac_core.c2
-rw-r--r--drivers/net/tulip/tulip_core.c2
-rw-r--r--drivers/net/wireless/Kconfig2
-rw-r--r--drivers/serial/21285.c14
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/serial/amba-pl010.c14
-rw-r--r--drivers/serial/amba-pl011.c14
-rw-r--r--drivers/serial/clps711x.c5
-rw-r--r--drivers/serial/pxa.c16
-rw-r--r--drivers/serial/s3c2410.c15
-rw-r--r--drivers/serial/sa1100.c5
-rw-r--r--drivers/serial/serial_lh7a40x.c13
-rw-r--r--drivers/serial/serial_txx9.c15
-rw-r--r--drivers/serial/vr41xx_siu.c6
-rw-r--r--fs/binfmt_elf.c4
-rw-r--r--include/asm-arm/arch-imx/imx-regs.h24
-rw-r--r--include/asm-arm/arch-s3c2410/regs-nand.h44
-rw-r--r--include/asm-arm/page.h18
-rw-r--r--include/linux/serial_core.h19
34 files changed, 852 insertions, 447 deletions
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e23f534d4e1..8d986b8401c 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
- s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
+ s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
print_mhz(s3c2440_clk_upll.rate));
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 9a8cc5ae225..d4c8281b55f 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
iotable_init(mach_desc, size);
+
/* rename any peripherals used differing from the s3c2410 */
- s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_nand.name = "s3c2440-nand";
/* change irq for watchdog */
@@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal)
break;
case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 1;
+ hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4fc6be629d..48bac7da8c7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -412,21 +412,20 @@ config CPU_BPREDICT_DISABLE
config TLS_REG_EMUL
bool
- default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+ default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
help
- We might be running on an ARMv6+ processor which should have the TLS
- register but for some reason we can't use it, or maybe an SMP system
- using a pre-ARMv6 processor (there are apparently a few prototypes
- like that in existence) and therefore access to that register must
- be emulated.
+ An SMP system using a pre-ARMv6 processor (there are apparently
+ a few prototypes like that in existence) and therefore access to
+ that required register must be emulated.
config HAS_TLS_REG
bool
- depends on CPU_32v6
- default y if !TLS_REG_EMUL
+ depends on !TLS_REG_EMUL
+ default y if SMP || CPU_32v7
help
This selects support for the CP15 thread register.
- It is defined to be available on ARMv6 or later. If a particular
- ARMv6 or later CPU doesn't support it then it must omc;ide "select
- TLS_REG_EMUL" along with its other caracteristics.
+ It is defined to be available on some ARMv6 processors (including
+ all SMP capable ARMv6's) or later processors. User space may
+ assume directly accessing that register and always obtain the
+ expected value only on ARMv7 and above.
diff --git a/arch/arm/mm/copypage-v4mc.S b/arch/arm/mm/copypage-v4mc.S
deleted file mode 100644
index 305af3dab3d..00000000000
--- a/arch/arm/mm/copypage-v4mc.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * linux/arch/arm/lib/copy_page-armv4mc.S
- *
- * Copyright (C) 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/constants.h>
-
- .text
- .align 5
-/*
- * ARMv4 mini-dcache optimised copy_user_page
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address. Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue. The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction. If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
- */
-ENTRY(v4_mc_copy_user_page)
- stmfd sp!, {r4, lr} @ 2
- mov r4, r0
- mov r0, r1
- bl map_page_minicache
- mov r1, #PAGE_SZ/64 @ 1
- ldmia r0!, {r2, r3, ip, lr} @ 4
-1: mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4+1
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4
- mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- stmia r4!, {r2, r3, ip, lr} @ 4
- ldmneia r0!, {r2, r3, ip, lr} @ 4
- bne 1b @ 1
- ldmfd sp!, {r4, pc} @ 3
-
- .align 5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4_mc_clear_user_page)
- str lr, [sp, #-4]!
- mov r1, #PAGE_SZ/64 @ 1
- mov r2, #0 @ 1
- mov r3, #0 @ 1
- mov ip, #0 @ 1
- mov lr, #0 @ 1
-1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
- stmia r0!, {r2, r3, ip, lr} @ 4
- stmia r0!, {r2, r3, ip, lr} @ 4
- subs r1, r1, #1 @ 1
- bne 1b @ 1
- ldr pc, [sp], #4
-
- __INITDATA
-
- .type v4_mc_user_fns, #object
-ENTRY(v4_mc_user_fns)
- .long v4_mc_clear_user_page
- .long v4_mc_copy_user_page
- .size v4_mc_user_fns, . - v4_mc_user_fns
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
new file mode 100644
index 00000000000..fc69dccdace
--- /dev/null
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/lib/copypage-armv4mc.S
+ *
+ * Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors. When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache. This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+ L_PTE_CACHEABLE)
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * ARMv4 mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction. If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+ asm volatile(
+ "stmfd sp!, {r4, lr} @ 2\n\
+ mov r4, %2 @ 1\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4+1\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmia %0!, {r2, r3, ip, lr} @ 4\n\
+ subs r4, r4, #1 @ 1\n\
+ stmia %1!, {r2, r3, ip, lr} @ 4\n\
+ ldmneia %0!, {r2, r3, ip, lr} @ 4\n\
+ bne 1b @ 1\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+}
+
+void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+ spin_lock(&minicache_lock);
+
+ set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+ flush_tlb_kernel_page(0xffff8000);
+
+ mc_copy_user_page((void *)0xffff8000, kto);
+
+ spin_unlock(&minicache_lock);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ */
+void __attribute__((naked))
+v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+ asm volatile(
+ "str lr, [sp, #-4]!\n\
+ mov r1, %0 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ stmia r0!, {r2, r3, ip, lr} @ 4\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1\n\
+ ldr pc, [sp], #4"
+ :
+ : "I" (PAGE_SIZE / 64));
+}
+
+struct cpu_user_fns v4_mc_user_fns __initdata = {
+ .cpu_clear_user_page = v4_mc_clear_user_page,
+ .cpu_copy_user_page = v4_mc_copy_user_page,
+};
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 694ac820885..a8c00236bd3 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -26,8 +26,8 @@
#define to_address (0xffffc000)
#define to_pgprot PAGE_KERNEL
-static pte_t *from_pte;
-static pte_t *to_pte;
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
static DEFINE_SPINLOCK(v6_lock);
#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@@ -74,8 +74,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
*/
spin_lock(&v6_lock);
- set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
- set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
from = from_address + (offset << PAGE_SHIFT);
to = to_address + (offset << PAGE_SHIFT);
@@ -114,7 +114,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
*/
spin_lock(&v6_lock);
- set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
flush_tlb_kernel_page(to);
clear_page((void *)to);
@@ -129,21 +129,6 @@ struct cpu_user_fns v6_user_fns __initdata = {
static int __init v6_userpage_init(void)
{
if (cache_is_vipt_aliasing()) {
- pgd_t *pgd;
- pmd_t *pmd;
-
- pgd = pgd_offset_k(from_address);
- pmd = pmd_alloc(&init_mm, pgd, from_address);
- if (!pmd)
- BUG();
- from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
- if (!from_pte)
- BUG();
-
- to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
- if (!to_pte)
- BUG();
-
cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
}
@@ -151,5 +136,4 @@ static int __init v6_userpage_init(void)
return 0;
}
-__initcall(v6_userpage_init);
-
+core_initcall(v6_userpage_init);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c6de48d8950..4085ed983e4 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,29 @@
#include <asm/cacheflush.h>
#include <asm/system.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+#define ALIAS_FLUSH_START 0xffff4000
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
+{
+ unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+
+ set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+ flush_tlb_kernel_page(to);
+
+ asm( "mcrr p15, 0, %1, %0, c14\n"
+ " mcrr p15, 0, %1, %0, c5\n"
+ :
+ : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+ : "cc");
+}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
static void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
@@ -37,6 +60,18 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
return;
/*
+ * This is a page cache page. If we have a VIPT cache, we
+ * only need to do one flush - which would be at the relevant
+ * userspace colour, which is congruent with page->index.
+ */
+ if (cache_is_vipt()) {
+ if (cache_is_vipt_aliasing())
+ flush_pfn_alias(page_to_pfn(page),
+ page->index << PAGE_CACHE_SHIFT);
+ return;
+ }
+
+ /*
* There are possible user space mappings of this page:
* - VIVT cache: we need to also write back and invalidate all user
* data in the current VM view associated with this page.
@@ -57,8 +92,6 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
- if (cache_is_vipt())
- break;
}
flush_dcache_mmap_unlock(mapping);
}
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 585dfb8e20b..2c2b93d77d4 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -37,6 +37,8 @@ pgprot_t pgprot_kernel;
EXPORT_SYMBOL(pgprot_kernel);
+pmd_t *top_pmd;
+
struct cachepolicy {
const char policy[16];
unsigned int cr_mask;
@@ -142,6 +144,16 @@ __setup("noalign", noalign_setup);
#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
/*
* need to get a 16k page for level 1
*/
@@ -220,7 +232,7 @@ void free_pgd_slow(pgd_t *pgd)
return;
/* pgd is always present and good */
- pmd = (pmd_t *)pgd;
+ pmd = pmd_off(pgd, 0);
if (pmd_none(*pmd))
goto free;
if (pmd_bad(*pmd)) {
@@ -246,9 +258,8 @@ free:
static inline void
alloc_init_section(unsigned long virt, unsigned long phys, int prot)
{
- pmd_t *pmdp;
+ pmd_t *pmdp = pmd_off_k(virt);
- pmdp = pmd_offset(pgd_offset_k(virt), virt);
if (virt & (1 << 20))
pmdp++;
@@ -283,11 +294,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
static inline void
alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
{
- pmd_t *pmdp;
+ pmd_t *pmdp = pmd_off_k(virt);
pte_t *ptep;
- pmdp = pmd_offset(pgd_offset_k(virt), virt);
-
if (pmd_none(*pmdp)) {
unsigned long pmdval;
ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
@@ -310,7 +319,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
*/
static inline void clear_mapping(unsigned long virt)
{
- pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
+ pmd_clear(pmd_off_k(virt));
}
struct mem_types {
@@ -578,7 +587,7 @@ void setup_mm_for_reboot(char mode)
PMD_TYPE_SECT;
if (cpu_arch <= CPU_ARCH_ARMv5)
pmdval |= PMD_BIT4;
- pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT);
+ pmd = pmd_off(pgd, i << PGDIR_SHIFT);
pmd[0] = __pmd(pmdval);
pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
flush_pmd_entry(pmd);
@@ -675,6 +684,8 @@ void __init memtable_init(struct meminfo *mi)
flush_cache_all();
flush_tlb_all();
+
+ top_pmd = pmd_off_k(0xffff0000);
}
/*
diff --git a/drivers/block/ioctl.c b/drivers/block/ioctl.c
index 5e03f5157ef..6d7bcc9da9e 100644
--- a/drivers/block/ioctl.c
+++ b/drivers/block/ioctl.c
@@ -237,3 +237,5 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
}
return ret;
}
+
+EXPORT_SYMBOL_GPL(blkdev_ioctl);
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 1a1fa3ccb91..82ccad0a7f1 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2406,7 +2406,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
- return ioctl_by_bdev(pd->bdev, cmd, arg);
+ return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
case CDROMEJECT:
/*
@@ -2414,7 +2414,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
* have to unlock it or else the eject command fails.
*/
pkt_lock_door(pd, 0);
- return ioctl_by_bdev(pd->bdev, cmd, arg);
+ return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
default:
printk("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index a2e33ec7961..131465e8de5 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -122,7 +122,7 @@ raw_ioctl(struct inode *inode, struct file *filp,
{
struct block_device *bdev = filp->private_data;
- return ioctl_by_bdev(bdev, command, arg);
+ return blkdev_ioctl(bdev->bd_inode, filp, command, arg);
}
static void bind_device(struct raw_config_request *rq)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 2e70d74fbde..4991bbd054f 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -51,7 +51,7 @@ config MMC_PXA
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA && ISA_DMA_API
+ depends on MMC && ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 39747526c71..b7fbd30b49a 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -28,7 +28,9 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/pnp.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
@@ -40,7 +42,7 @@
#include "wbsd.h"
#define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.1"
+#define DRIVER_VERSION "1.2"
#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) \
@@ -52,10 +54,6 @@
#define DBGF(x...) do { } while (0)
#endif
-static unsigned int io = 0x248;
-static unsigned int irq = 6;
-static int dma = 2;
-
#ifdef CONFIG_MMC_DEBUG
void DBG_REG(int reg, u8 value)
{
@@ -79,28 +77,61 @@ void DBG_REG(int reg, u8 value)
#endif
/*
+ * Device resources
+ */
+
+#ifdef CONFIG_PNP
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ { "WEC0517", 0 },
+ { "WEC0518", 0 },
+ { "", 0 },
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+#endif /* CONFIG_PNP */
+
+#ifdef CONFIG_PNP
+static unsigned int nopnp = 0;
+#else
+static const unsigned int nopnp = 1;
+#endif
+static unsigned int io = 0x248;
+static unsigned int irq = 6;
+static int dma = 2;
+
+/*
* Basic functions
*/
static inline void wbsd_unlock_config(struct wbsd_host* host)
{
+ BUG_ON(host->config == 0);
+
outb(host->unlock_code, host->config);
outb(host->unlock_code, host->config);
}
static inline void wbsd_lock_config(struct wbsd_host* host)
{
+ BUG_ON(host->config == 0);
+
outb(LOCK_CODE, host->config);
}
static inline void wbsd_write_config(struct wbsd_host* host, u8 reg, u8 value)
{
+ BUG_ON(host->config == 0);
+
outb(reg, host->config);
outb(value, host->config + 1);
}
static inline u8 wbsd_read_config(struct wbsd_host* host, u8 reg)
{
+ BUG_ON(host->config == 0);
+
outb(reg, host->config);
return inb(host->config + 1);
}
@@ -133,6 +164,13 @@ static void wbsd_init_device(struct wbsd_host* host)
wbsd_write_index(host, WBSD_IDX_SETUP, setup);
/*
+ * Set DAT3 to input
+ */
+ setup &= ~WBSD_DAT3_H;
+ wbsd_write_index(host, WBSD_IDX_SETUP, setup);
+ host->flags &= ~WBSD_FIGNORE_DETECT;
+
+ /*
* Read back default clock.
*/
host->clk = wbsd_read_index(host, WBSD_IDX_CLK);
@@ -148,6 +186,14 @@ static void wbsd_init_device(struct wbsd_host* host)
wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F);
/*
+ * Test for card presence
+ */
+ if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT)
+ host->flags |= WBSD_FCARD_PRESENT;
+ else
+ host->flags &= ~WBSD_FCARD_PRESENT;
+
+ /*
* Enable interesting interrupts.
*/
ier = 0;
@@ -407,8 +453,6 @@ static inline void wbsd_get_long_reply(struct wbsd_host* host,
}
}
-static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs);
-
static void wbsd_send_command(struct wbsd_host* host, struct mmc_command* cmd)
{
int i;
@@ -646,6 +690,13 @@ static void wbsd_fill_fifo(struct wbsd_host* host)
}
wbsd_kunmap_sg(host);
+
+ /*
+ * The controller stops sending interrupts for
+ * 'FIFO empty' under certain conditions. So we
+ * need to be a bit more pro-active.
+ */
+ tasklet_schedule(&host->fifo_tasklet);
}
static void wbsd_prepare_data(struct wbsd_host* host, struct mmc_data* data)
@@ -850,9 +901,11 @@ static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data)
wbsd_request_end(host, host->mrq);
}
-/*
- * MMC Callbacks
- */
+/*****************************************************************************\
+ * *
+ * MMC layer callbacks *
+ * *
+\*****************************************************************************/
static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq)
{
@@ -874,7 +927,7 @@ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq)
* If there is no card in the slot then
* timeout immediatly.
*/
- if (!(inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT))
+ if (!(host->flags & WBSD_FCARD_PRESENT))
{
cmd->error = MMC_ERR_TIMEOUT;
goto done;
@@ -953,33 +1006,50 @@ static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
host->clk = clk;
}
+ /*
+ * Power up card.
+ */
if (ios->power_mode != MMC_POWER_OFF)
{
- /*
- * Power up card.
- */
pwr = inb(host->base + WBSD_CSR);
pwr &= ~WBSD_POWER_N;
outb(pwr, host->base + WBSD_CSR);
-
- /*
- * This behaviour is stolen from the
- * Windows driver. Don't know why, but
- * it is needed.
- */
- setup = wbsd_read_index(host, WBSD_IDX_SETUP);
- if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
- setup |= WBSD_DAT3_H;
- else
- setup &= ~WBSD_DAT3_H;
- wbsd_write_index(host, WBSD_IDX_SETUP, setup);
-
- mdelay(1);
}
+ /*
+ * MMC cards need to have pin 1 high during init.
+ * Init time corresponds rather nicely with the bus mode.
+ * It wreaks havoc with the card detection though so
+ * that needs to be disabed.
+ */
+ setup = wbsd_read_index(host, WBSD_IDX_SETUP);
+ if ((ios->power_mode == MMC_POWER_ON) &&
+ (ios->bus_mode == MMC_BUSMODE_OPENDRAIN))
+ {
+ setup |= WBSD_DAT3_H;
+ host->flags |= WBSD_FIGNORE_DETECT;
+ }
+ else
+ {
+ setup &= ~WBSD_DAT3_H;
+ host->flags &= ~WBSD_FIGNORE_DETECT;
+ }
+ wbsd_write_index(host, WBSD_IDX_SETUP, setup);
+
spin_unlock_bh(&host->lock);
}
+static struct mmc_host_ops wbsd_ops = {
+ .request = wbsd_request,
+ .set_ios = wbsd_set_ios,
+};
+
+/*****************************************************************************\
+ * *
+ * Interrupt handling *
+ * *
+\*****************************************************************************/
+
/*
* Tasklets
*/
@@ -1005,17 +1075,33 @@ static void wbsd_tasklet_card(unsigned long param)
{
struct wbsd_host* host = (struct wbsd_host*)param;
u8 csr;
+ int change = 0;
spin_lock(&host->lock);
+ if (host->flags & WBSD_FIGNORE_DETECT)
+ {
+ spin_unlock(&host->lock);
+ return;
+ }
+
csr = inb(host->base + WBSD_CSR);
WARN_ON(csr == 0xff);
if (csr & WBSD_CARDPRESENT)
- DBG("Card inserted\n");
- else
+ {
+ if (!(host->flags & WBSD_FCARD_PRESENT))
+ {
+ DBG("Card inserted\n");
+ host->flags |= WBSD_FCARD_PRESENT;
+ change = 1;
+ }
+ }
+ else if (host->flags & WBSD_FCARD_PRESENT)
{
DBG("Card removed\n");
+ host->flags &= ~WBSD_FCARD_PRESENT;
+ change = 1;
if (host->mrq)
{
@@ -1033,7 +1119,8 @@ static void wbsd_tasklet_card(unsigned long param)
*/
spin_unlock(&host->lock);
- mmc_detect_change(host->mmc);
+ if (change)
+ mmc_detect_change(host->mmc);
}
static void wbsd_tasklet_fifo(unsigned long param)
@@ -1200,11 +1287,85 @@ static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
+/*****************************************************************************\
+ * *
+ * Device initialisation and shutdown *
+ * *
+\*****************************************************************************/
+
/*
- * Support functions for probe
+ * Allocate/free MMC structure.
*/
-static int wbsd_scan(struct wbsd_host* host)
+static int __devinit wbsd_alloc_mmc(struct device* dev)
+{
+ struct mmc_host* mmc;
+ struct wbsd_host* host;
+
+ /*
+ * Allocate MMC structure.
+ */
+ mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->dma = -1;
+
+ /*
+ * Set host parameters.
+ */
+ mmc->ops = &wbsd_ops;
+ mmc->f_min = 375000;
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+
+ spin_lock_init(&host->lock);
+
+ /*
+ * Maximum number of segments. Worst case is one sector per segment
+ * so this will be 64kB/512.
+ */
+ mmc->max_hw_segs = 128;
+ mmc->max_phys_segs = 128;
+
+ /*
+ * Maximum number of sectors in one transfer. Also limited by 64kB
+ * buffer.
+ */
+ mmc->max_sectors = 128;
+
+ /*
+ * Maximum segment size. Could be one segment with the maximum number
+ * of segments.
+ */
+ mmc->max_seg_size = mmc->max_sectors * 512;
+
+ dev_set_drvdata(dev, mmc);
+
+ return 0;
+}
+
+static void __devexit wbsd_free_mmc(struct device* dev)
+{
+ struct mmc_host* mmc;
+
+ mmc = dev_get_drvdata(dev);
+ if (!mmc)
+ return;
+
+ mmc_free_host(mmc);
+
+ dev_set_drvdata(dev, NULL);
+}
+
+/*
+ * Scan for known chip id:s
+ */
+
+static int __devinit wbsd_scan(struct wbsd_host* host)
{
int i, j, k;
int id;
@@ -1258,12 +1419,16 @@ static int wbsd_scan(struct wbsd_host* host)
return -ENODEV;
}
-static int wbsd_request_regions(struct wbsd_host* host)
+/*
+ * Allocate/free io port ranges
+ */
+
+static int __devinit wbsd_request_region(struct wbsd_host* host, int base)
{
if (io & 0x7)
return -EINVAL;
- if (!request_region(io, 8, DRIVER_NAME))
+ if (!request_region(base, 8, DRIVER_NAME))
return -EIO;
host->base = io;
@@ -1271,19 +1436,25 @@ static int wbsd_request_regions(struct wbsd_host* host)
return 0;
}
-static void wbsd_release_regions(struct wbsd_host* host)
+static void __devexit wbsd_release_regions(struct wbsd_host* host)
{
if (host->base)
release_region(host->base, 8);
+
+ host->base = 0;
if (host->config)
release_region(host->config, 2);
+
+ host->config = 0;
}
-static void wbsd_init_dma(struct wbsd_host* host)
+/*
+ * Allocate/free DMA port and buffer
+ */
+
+static void __devinit wbsd_request_dma(struct wbsd_host* host, int dma)
{
- host->dma = -1;
-
if (dma < 0)
return;
@@ -1294,7 +1465,7 @@ static void wbsd_init_dma(struct wbsd_host* host)
* We need to allocate a special buffer in
* order for ISA to be able to DMA to it.
*/
- host->dma_buffer = kmalloc(65536,
+ host->dma_buffer = kmalloc(WBSD_DMA_SIZE,
GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN);
if (!host->dma_buffer)
goto free;
@@ -1302,7 +1473,8 @@ static void wbsd_init_dma(struct wbsd_host* host)
/*
* Translate the address to a physical address.
*/
- host->dma_addr = isa_virt_to_bus(host->dma_buffer);
+ host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer,
+ WBSD_DMA_SIZE, DMA_BIDIRECTIONAL);
/*
* ISA DMA must be aligned on a 64k basis.
@@ -1325,6 +1497,10 @@ kfree:
*/
BUG_ON(1);
+ dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE,
+ DMA_BIDIRECTIONAL);
+ host->dma_addr = (dma_addr_t)NULL;
+
kfree(host->dma_buffer);
host->dma_buffer = NULL;
@@ -1336,60 +1512,122 @@ err:
"Falling back on FIFO.\n", dma);
}
-static struct mmc_host_ops wbsd_ops = {
- .request = wbsd_request,
- .set_ios = wbsd_set_ios,
-};
+static void __devexit wbsd_release_dma(struct wbsd_host* host)
+{
+ if (host->dma_addr)
+ dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE,
+ DMA_BIDIRECTIONAL);
+ if (host->dma_buffer)
+ kfree(host->dma_buffer);
+ if (host->dma >= 0)
+ free_dma(host->dma);
+
+ host->dma = -1;
+ host->dma_buffer = NULL;
+ host->dma_addr = (dma_addr_t)NULL;
+}
/*
- * Device probe
+ * Allocate/free IRQ.
*/
-static int wbsd_probe(struct device* dev)
+static int __devinit wbsd_request_irq(struct wbsd_host* host, int irq)
{
- struct wbsd_host* host = NULL;
- struct mmc_host* mmc = NULL;
int ret;
/*
- * Allocate MMC structure.
+ * Allocate interrupt.
*/
- mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev);
- if (!mmc)
- return -ENOMEM;
-
- host = mmc_priv(mmc);
- host->mmc = mmc;
+
+ ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host);
+ if (ret)
+ return ret;
+ host->irq = irq;
+
/*
- * Scan for hardware.
+ * Set up tasklets.
*/
- ret = wbsd_scan(host);
- if (ret)
- goto freemmc;
+ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host);
+ tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host);
+ tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host);
+ tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host);
+ tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host);
+ tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host);
+
+ return 0;
+}
- /*
- * Reset the chip.
- */
- wbsd_write_config(host, WBSD_CONF_SWRST, 1);
- wbsd_write_config(host, WBSD_CONF_SWRST, 0);
+static void __devexit wbsd_release_irq(struct wbsd_host* host)
+{
+ if (!host->irq)
+ return;
+ free_irq(host->irq, host);
+
+ host->irq = 0;
+
+ tasklet_kill(&host->card_tasklet);
+ tasklet_kill(&host->fifo_tasklet);
+ tasklet_kill(&host->crc_tasklet);
+ tasklet_kill(&host->timeout_tasklet);
+ tasklet_kill(&host->finish_tasklet);
+ tasklet_kill(&host->block_tasklet);
+}
+
+/*
+ * Allocate all resources for the host.
+ */
+
+static int __devinit wbsd_request_resources(struct wbsd_host* host,
+ int base, int irq, int dma)
+{
+ int ret;
+
/*
* Allocate I/O ports.
*/
- ret = wbsd_request_regions(host);
+ ret = wbsd_request_region(host, base);
if (ret)
- goto release;
+ return ret;
/*
- * Set host parameters.
+ * Allocate interrupt.
*/
- mmc->ops = &wbsd_ops;
- mmc->f_min = 375000;
- mmc->f_max = 24000000;
- mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+ ret = wbsd_request_irq(host, irq);
+ if (ret)
+ return ret;
+
+ /*
+ * Allocate DMA.
+ */
+ wbsd_request_dma(host, dma);
- spin_lock_init(&host->lock);
+ return 0;
+}
+
+/*
+ * Release all resources for the host.
+ */
+
+static void __devexit wbsd_release_resources(struct wbsd_host* host)
+{
+ wbsd_release_dma(host);
+ wbsd_release_irq(host);
+ wbsd_release_regions(host);
+}
+
+/*
+ * Configure the resources the chip should use.
+ */
+
+static void __devinit wbsd_chip_config(struct wbsd_host* host)
+{
+ /*
+ * Reset the chip.
+ */
+ wbsd_write_config(host, WBSD_CONF_SWRST, 1);
+ wbsd_write_config(host, WBSD_CONF_SWRST, 0);
/*
* Select SD/MMC function.
@@ -1399,165 +1637,241 @@ static int wbsd_probe(struct device* dev)
/*
* Set up card detection.
*/
- wbsd_write_config(host, WBSD_CONF_PINS, 0x02);
+ wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11);
/*
- * Configure I/O port.
+ * Configure chip
*/
wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8);
wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff);
-
- /*
- * Allocate interrupt.
- */
- ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host);
- if (ret)
- goto release;
- host->irq = irq;
+ wbsd_write_config(host, WBSD_CONF_IRQ, host->irq);
- /*
- * Set up tasklets.
- */
- tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host);
- tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host);
- tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host);
- tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host);
- tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host);
- tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host);
+ if (host->dma >= 0)
+ wbsd_write_config(host, WBSD_CONF_DRQ, host->dma);
/*
- * Configure interrupt.
+ * Enable and power up chip.
*/
- wbsd_write_config(host, WBSD_CONF_IRQ, host->irq);
+ wbsd_write_config(host, WBSD_CONF_ENABLE, 1);
+ wbsd_write_config(host, WBSD_CONF_POWER, 0x20);
+}
+
+/*
+ * Check that configured resources are correct.
+ */
+
+static int __devinit wbsd_chip_validate(struct wbsd_host* host)
+{
+ int base, irq, dma;
/*
- * Allocate DMA.
+ * Select SD/MMC function.
*/
- wbsd_init_dma(host);
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
/*
- * If all went well, then configure DMA.
+ * Read configuration.
*/
- if (host->dma >= 0)
- wbsd_write_config(host, WBSD_CONF_DRQ, host->dma);
+ base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8;
+ base |= wbsd_read_config(host, WBSD_CONF_PORT_LO);
- /*
- * Maximum number of segments. Worst case is one sector per segment
- * so this will be 64kB/512.
- */
- mmc->max_hw_segs = 128;
- mmc->max_phys_segs = 128;
+ irq = wbsd_read_config(host, WBSD_CONF_IRQ);
+
+ dma = wbsd_read_config(host, WBSD_CONF_DRQ);
/*
- * Maximum number of sectors in one transfer. Also limited by 64kB
- * buffer.
+ * Validate against given configuration.
*/
- mmc->max_sectors = 128;
+ if (base != host->base)
+ return 0;
+ if (irq != host->irq)
+ return 0;
+ if ((dma != host->dma) && (host->dma != -1))
+ return 0;
+
+ return 1;
+}
+
+/*****************************************************************************\
+ * *
+ * Devices setup and shutdown *
+ * *
+\*****************************************************************************/
+
+static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma,
+ int pnp)
+{
+ struct wbsd_host* host = NULL;
+ struct mmc_host* mmc = NULL;
+ int ret;
+
+ ret = wbsd_alloc_mmc(dev);
+ if (ret)
+ return ret;
+
+ mmc = dev_get_drvdata(dev);
+ host = mmc_priv(mmc);
/*
- * Maximum segment size. Could be one segment with the maximum number
- * of segments.
+ * Scan for hardware.
*/
- mmc->max_seg_size = mmc->max_sectors * 512;
+ ret = wbsd_scan(host);
+ if (ret)
+ {
+ if (pnp && (ret == -ENODEV))
+ {
+ printk(KERN_WARNING DRIVER_NAME
+ ": Unable to confirm device presence. You may "
+ "experience lock-ups.\n");
+ }
+ else
+ {
+ wbsd_free_mmc(dev);
+ return ret;
+ }
+ }
/*
- * Enable chip.
+ * Request resources.
*/
- wbsd_write_config(host, WBSD_CONF_ENABLE, 1);
+ ret = wbsd_request_resources(host, io, irq, dma);
+ if (ret)
+ {
+ wbsd_release_resources(host);
+ wbsd_free_mmc(dev);
+ return ret;
+ }
/*
- * Power up chip.
+ * See if chip needs to be configured.
*/
- wbsd_write_config(host, WBSD_CONF_POWER, 0x20);
+ if (pnp && (host->config != 0))
+ {
+ if (!wbsd_chip_validate(host))
+ {
+ printk(KERN_WARNING DRIVER_NAME
+ ": PnP active but chip not configured! "
+ "You probably have a buggy BIOS. "
+ "Configuring chip manually.\n");
+ wbsd_chip_config(host);
+ }
+ }
+ else
+ wbsd_chip_config(host);
/*
* Power Management stuff. No idea how this works.
* Not tested.
*/
#ifdef CONFIG_PM
- wbsd_write_config(host, WBSD_CONF_PME, 0xA0);
+ if (host->config)
+ wbsd_write_config(host, WBSD_CONF_PME, 0xA0);
#endif
+ /*
+ * Allow device to initialise itself properly.
+ */
+ mdelay(5);
/*
* Reset the chip into a known state.
*/
wbsd_init_device(host);
- dev_set_drvdata(dev, mmc);
-
- /*
- * Add host to MMC layer.
- */
mmc_add_host(mmc);
- printk(KERN_INFO "%s: W83L51xD id %x at 0x%x irq %d dma %d\n",
- mmc->host_name, (int)host->chip_id, (int)host->base,
- (int)host->irq, (int)host->dma);
+ printk(KERN_INFO "%s: W83L51xD", mmc->host_name);
+ if (host->chip_id != 0)
+ printk(" id %x", (int)host->chip_id);
+ printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
+ if (host->dma >= 0)
+ printk(" dma %d", (int)host->dma);
+ else
+ printk(" FIFO");
+ if (pnp)
+ printk(" PnP");
+ printk("\n");
return 0;
-
-release:
- wbsd_release_regions(host);
-
-freemmc:
- mmc_free_host(mmc);
-
- return ret;
}
-/*
- * Device remove
- */
-
-static int wbsd_remove(struct device* dev)
+static void __devexit wbsd_shutdown(struct device* dev, int pnp)
{
struct mmc_host* mmc = dev_get_drvdata(dev);
struct wbsd_host* host;
if (!mmc)
- return 0;
+ return;
host = mmc_priv(mmc);
- /*
- * Unregister host with MMC layer.
- */
mmc_remove_host(mmc);
- /*
- * Power down the SD/MMC function.
- */
- wbsd_unlock_config(host);
- wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
- wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
- wbsd_lock_config(host);
+ if (!pnp)
+ {
+ /*
+ * Power down the SD/MMC function.
+ */
+ wbsd_unlock_config(host);
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
+ wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
+ wbsd_lock_config(host);
+ }
- /*
- * Free resources.
- */
- if (host->dma_buffer)
- kfree(host->dma_buffer);
+ wbsd_release_resources(host);
- if (host->dma >= 0)
- free_dma(host->dma);
+ wbsd_free_mmc(dev);
+}
- free_irq(host->irq, host);
+/*
+ * Non-PnP
+ */
+
+static int __devinit wbsd_probe(struct device* dev)
+{
+ return wbsd_init(dev, io, irq, dma, 0);
+}
+
+static int __devexit wbsd_remove(struct device* dev)
+{
+ wbsd_shutdown(dev, 0);
+
+ return 0;
+}
+
+/*
+ * PnP
+ */
+
+#ifdef CONFIG_PNP
+
+static int __devinit
+wbsd_pnp_probe(struct pnp_dev * pnpdev, const struct pnp_device_id *dev_id)
+{
+ int io, irq, dma;
- tasklet_kill(&host->card_tasklet);
- tasklet_kill(&host->fifo_tasklet);
- tasklet_kill(&host->crc_tasklet);
- tasklet_kill(&host->timeout_tasklet);
- tasklet_kill(&host->finish_tasklet);
- tasklet_kill(&host->block_tasklet);
+ /*
+ * Get resources from PnP layer.
+ */
+ io = pnp_port_start(pnpdev, 0);
+ irq = pnp_irq(pnpdev, 0);
+ if (pnp_dma_valid(pnpdev, 0))
+ dma = pnp_dma(pnpdev, 0);
+ else
+ dma = -1;
- wbsd_release_regions(host);
+ DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma);
- mmc_free_host(mmc);
+ return wbsd_init(&pnpdev->dev, io, irq, dma, 1);
+}
- return 0;
+static void __devexit wbsd_pnp_remove(struct pnp_dev * dev)
+{
+ wbsd_shutdown(&dev->dev, 1);
}
+#endif /* CONFIG_PNP */
+
/*
* Power management
*/
@@ -1581,17 +1895,7 @@ static int wbsd_resume(struct device *dev, u32 level)
#define wbsd_resume NULL
#endif
-static void wbsd_release(struct device *dev)
-{
-}
-
-static struct platform_device wbsd_device = {
- .name = DRIVER_NAME,
- .id = -1,
- .dev = {
- .release = wbsd_release,
- },
-};
+static struct platform_device *wbsd_device;
static struct device_driver wbsd_driver = {
.name = DRIVER_NAME,
@@ -1603,6 +1907,17 @@ static struct device_driver wbsd_driver = {
.resume = wbsd_resume,
};
+#ifdef CONFIG_PNP
+
+static struct pnp_driver wbsd_pnp_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pnp_dev_table,
+ .probe = wbsd_pnp_probe,
+ .remove = wbsd_pnp_remove,
+};
+
+#endif /* CONFIG_PNP */
+
/*
* Module loading/unloading
*/
@@ -1615,29 +1930,57 @@ static int __init wbsd_drv_init(void)
": Winbond W83L51xD SD/MMC card interface driver, "
DRIVER_VERSION "\n");
printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
-
- result = driver_register(&wbsd_driver);
- if (result < 0)
- return result;
- result = platform_device_register(&wbsd_device);
- if (result < 0)
- return result;
+#ifdef CONFIG_PNP
+
+ if (!nopnp)
+ {
+ result = pnp_register_driver(&wbsd_pnp_driver);
+ if (result < 0)
+ return result;
+ }
+
+#endif /* CONFIG_PNP */
+
+ if (nopnp)
+ {
+ result = driver_register(&wbsd_driver);
+ if (result < 0)
+ return result;
+
+ wbsd_device = platform_device_register_simple(DRIVER_NAME, -1,
+ NULL, 0);
+ if (IS_ERR(wbsd_device))
+ return PTR_ERR(wbsd_device);
+ }
return 0;
}
static void __exit wbsd_drv_exit(void)
{
- platform_device_unregister(&wbsd_device);
+#ifdef CONFIG_PNP
+
+ if (!nopnp)
+ pnp_unregister_driver(&wbsd_pnp_driver);
- driver_unregister(&wbsd_driver);
+#endif /* CONFIG_PNP */
+
+ if (nopnp)
+ {
+ platform_device_unregister(wbsd_device);
+
+ driver_unregister(&wbsd_driver);
+ }
DBG("unloaded\n");
}
module_init(wbsd_drv_init);
module_exit(wbsd_drv_exit);
+#ifdef CONFIG_PNP
+module_param(nopnp, uint, 0444);
+#endif
module_param(io, uint, 0444);
module_param(irq, uint, 0444);
module_param(dma, int, 0444);
@@ -1646,6 +1989,9 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver");
MODULE_VERSION(DRIVER_VERSION);
+#ifdef CONFIG_PNP
+MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)");
+#endif
MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)");
MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)");
MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)");
diff --git a/drivers/mmc/wbsd.h b/drivers/mmc/wbsd.h
index fdc03b56a81..864f30828d0 100644
--- a/drivers/mmc/wbsd.h
+++ b/drivers/mmc/wbsd.h
@@ -35,6 +35,12 @@ const int valid_ids[] = {
#define DEVICE_SD 0x03
+#define WBSD_PINS_DAT3_HI 0x20
+#define WBSD_PINS_DAT3_OUT 0x10
+#define WBSD_PINS_GP11_HI 0x04
+#define WBSD_PINS_DETECT_GP11 0x02
+#define WBSD_PINS_DETECT_DAT3 0x01
+
#define WBSD_CMDR 0x00
#define WBSD_DFR 0x01
#define WBSD_EIR 0x02
@@ -133,6 +139,7 @@ const int valid_ids[] = {
#define WBSD_CRC_OK 0x05 /* S010E (00101) */
#define WBSD_CRC_FAIL 0x0B /* S101E (01011) */
+#define WBSD_DMA_SIZE 65536
struct wbsd_host
{
@@ -140,6 +147,11 @@ struct wbsd_host
spinlock_t lock; /* Mutex */
+ int flags; /* Driver states */
+
+#define WBSD_FCARD_PRESENT (1<<0) /* Card is present */
+#define WBSD_FIGNORE_DETECT (1<<1) /* Ignore card detection */
+
struct mmc_request* mrq; /* Current request */
u8 isr; /* Accumulated ISR */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6202b10dbb4..e038d55e4f6 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
-obj-$(CONFIG_NET_WIRELESS) += wireless/
+obj-$(CONFIG_NET_RADIO) += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index ab44358ddbf..6482d994d48 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = {
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
- uint *data = (uint *) & rq->ifr_ifru;
+ uint16_t *data = (uint16_t *) & rq->ifr_ifru;
switch (cmd) {
case SIOCGMIIPHY:
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index d098b3ba353..e0ae3ed6e57 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev)
if (entry != 0) {
/* Avoid a chip errata by prefixing a dummy entry. Don't do
this on the ULI526X as it triggers a different problem */
- if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
+ if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
tp->tx_ring[entry].length =
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 0aaa12c0c09..1d3231cc471 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -323,7 +323,7 @@ config PRISM54
For a complete list of supported cards visit <http://prism54.org>.
Here is the latest confirmed list of supported cards:
- 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
Allnet ALL0271 PCI Card
Compex WL54G Cardbus Card
Corega CG-WLCB54GT Cardbus Card
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 33fbda79f35..0b10169961e 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -126,18 +126,8 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
flag = TTY_FRAME;
}
- if ((rxs & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rxs & RXSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
+
status = *CSR_UARTFLG;
}
tty_flip_buffer_push(tty);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d9358608fd..3bbf0cc6e53 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1122,18 +1122,9 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((lsr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((lsr & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
ignore_char:
lsr = serial_inp(up, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index f2a5e2933c4..2884b310e54 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -198,18 +198,8 @@ pl010_rx_chars(struct uart_port *port)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((rsr & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = UART_GET_FR(port);
}
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d5cbef3fe8b..7db88ee18f7 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -163,18 +163,8 @@ pl011_rx_chars(struct uart_amba_port *uap)
if (uart_handle_sysrq_char(&uap->port, ch, regs))
goto ignore_char;
- if ((rsr & uap->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 6242f3090a9..e92522b33c4 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -143,10 +143,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
- if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
ignore_char:
status = clps_readl(SYSFLG(port));
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 51d8a49f447..9dc151d8fa6 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
}
+
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 435750d40a4..2a9f7ade2c9 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -394,20 +394,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((uerstat & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
-
- if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
-
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
ignore_char:
continue;
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 157218bc6c6..22565a67a57 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -237,10 +237,7 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
if (uart_handle_sysrq_char(&sport->port, ch, regs))
goto ignore_char;
- if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
ignore_char:
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 85cfa08d3ba..56f269b6bfb 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -190,18 +190,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
continue;
- if ((data & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, data, flag);
- }
- if ((data & RxOverrunError)
- && tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, data, RxOverrunError, data, flag);
}
tty_flip_buffer_push (tty);
return;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 37b2ef297cb..3f1051a4a13 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -350,18 +350,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((disr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((disr & TXX9_SIDISR_UOER) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
+
ignore_char:
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 307886199f2..5d2ceb623e6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -412,10 +412,8 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status,
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((lsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
- if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
ignore_char:
lsr = siu_read(port, UART_LSR);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index ce9423bb2de..c374be51b04 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -251,7 +251,7 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr * exec,
}
/* Populate argv and envp */
- p = current->mm->arg_start;
+ p = current->mm->arg_end = current->mm->arg_start;
while (argc-- > 0) {
size_t len;
__put_user((elf_addr_t)p, argv++);
@@ -1301,7 +1301,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
struct mm_struct *mm)
{
- int i, len;
+ unsigned int i, len;
/* first copy the parameters from user space */
memset(psinfo, 0, sizeof(struct elf_prpsinfo));
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
index f32c203952c..93b840e8fa6 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -228,6 +228,30 @@
#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
/*
+ * PWM controller
+ */
+#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
+#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
+#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
+#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
+
+#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
+#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
+#define PWMC_SWR (0x01<<16) /* Software Reset */
+#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
+#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
+#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
+#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
+#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
+#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
+#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
+#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
+
+#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
+#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
+#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
+
+/*
* DMA Controller
*/
#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h
index c443ac83469..7cff235e667 100644
--- a/include/asm-arm/arch-s3c2410/regs-nand.h
+++ b/include/asm-arm/arch-s3c2410/regs-nand.h
@@ -1,16 +1,17 @@
/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * S3C2410 clock register definitions
+ * S3C2410 NAND register definitions
*
* Changelog:
* 18-Aug-2004 BJD Copied file from 2.4 and updated
+ * 01-May-2005 BJD Added definitions for s3c2440 controller
*/
#ifndef __ASM_ARM_REGS_NAND
@@ -26,6 +27,22 @@
#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
#define S3C2410_NFECC S3C2410_NFREG(0x14)
+#define S3C2440_NFCONT S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA S3C2410_NFREG(0x10)
+#define S3C2440_NFECCD0 S3C2410_NFREG(0x14)
+#define S3C2440_NFECCD1 S3C2410_NFREG(0x18)
+#define S3C2440_NFECCD S3C2410_NFREG(0x1C)
+#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
+#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
+#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
+#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
+#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
+#define S3C2440_NFSECC S3C2410_NFREG(0x34)
+#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
+#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
+
#define S3C2410_NFCONF_EN (1<<15)
#define S3C2410_NFCONF_512BYTE (1<<14)
#define S3C2410_NFCONF_4STEP (1<<13)
@@ -37,7 +54,28 @@
#define S3C2410_NFSTAT_BUSY (1<<0)
-/* think ECC can only be 8bit read? */
+#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0)
+#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0)
+#define S3C2440_NFCONF_ADVFLASH (1<<3)
+#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
+
+#define S3C2440_NFCONT_LOCKTIGHT (1<<13)
+#define S3C2440_NFCONT_SOFTLOCK (1<<12)
+#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10)
+#define S3C2440_NFCONT_RNBINT_EN (1<<9)
+#define S3C2440_NFCONT_RN_FALLING (1<<8)
+#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6)
+#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5)
+#define S3C2440_NFCONT_INITECC (1<<4)
+#define S3C2440_NFCONT_nFCE (1<<1)
+#define S3C2440_NFCONT_ENABLE (1<<0)
+
+#define S3C2440_NFSTAT_READY (1<<0)
+#define S3C2440_NFSTAT_nCE (1<<1)
+#define S3C2440_NFSTAT_RnB_CHANGE (1<<2)
+#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3)
#endif /* __ASM_ARM_REGS_NAND */
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 4ca3a8e9348..019c45d7573 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -114,19 +114,8 @@ extern void __cpu_copy_user_page(void *to, const void *from,
unsigned long user);
#endif
-#define clear_user_page(addr,vaddr,pg) \
- do { \
- preempt_disable(); \
- __cpu_clear_user_page(addr, vaddr); \
- preempt_enable(); \
- } while (0)
-
-#define copy_user_page(to,from,vaddr,pg) \
- do { \
- preempt_disable(); \
- __cpu_copy_user_page(to, from, vaddr); \
- preempt_enable(); \
- } while (0)
+#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
#define clear_page(page) memzero((void *)(page), PAGE_SIZE)
extern void copy_page(void *to, const void *from);
@@ -171,6 +160,9 @@ typedef unsigned long pgprot_t;
#endif /* STRICT_MM_TYPECHECKS */
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+
/* Pure 2^n version of get_order */
static inline int get_order(unsigned long size)
{
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c3fb5984f25..d6025af7efa 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -479,6 +479,25 @@ uart_handle_cts_change(struct uart_port *port, unsigned int status)
}
}
+#include <linux/tty_flip.h>
+
+static inline void
+uart_insert_char(struct uart_port *port, unsigned int status,
+ unsigned int overrun, unsigned int ch, unsigned int flag)
+{
+ struct tty_struct *tty = port->info->tty;
+
+ if ((status & port->ignore_status_mask & ~overrun) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ /*
+ * Overrun is special. Since it's reported immediately,
+ * it doesn't affect the current character.
+ */
+ if (status & ~port->ignore_status_mask & overrun)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+}
+
/*
* UART_ENABLE_MS - determine if port should enable modem status irqs
*/