diff options
author | Pekka Enberg <penberg@cs.helsinki.fi> | 2008-10-30 19:04:55 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-01-06 13:51:51 -0800 |
commit | 82321c2b56d4df95c9a41d6b032aeb769c8f210e (patch) | |
tree | dcde9ff344b1829e25b573f25f6a5fd0d7e1982f | |
parent | 5c58093e63ff0a391acf708e153ef0b5d09aefc0 (diff) |
Staging: w35und: remove dead code from wbhal.c
Remove tons of unused code from wbhal.c.
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r-- | drivers/staging/winbond/wbhal.c | 311 | ||||
-rw-r--r-- | drivers/staging/winbond/wbhal_f.h | 22 |
2 files changed, 1 insertions, 332 deletions
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index b23c5055605..8a9d21cbb0c 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -2,13 +2,6 @@ #include "wbhal_f.h" #include "wblinux_f.h" -void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address ) -{ - if( pHwData->SurpriseRemove ) return; - - memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS ); -} - void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address ) { u32 ltmp[2]; @@ -377,92 +370,6 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) } //--------------------------------------------------------------------------------------------------- -void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates, - u8 length, unsigned char basic_rate_set) -{ - struct wb35_reg *reg = &pHwData->reg; - u32 tmp, tmp1; - u8 Rate[12]={ 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 }; - u8 SupportedRate[16]; - u8 i, j, k, Count1, Count2, Byte; - - if( pHwData->SurpriseRemove ) return; - - if (basic_rate_set) { - reg->M28_MacControl &= ~0x000fff00; - tmp1 = 0x00000100; - } else { - reg->M28_MacControl &= ~0xfff00000; - tmp1 = 0x00100000; - } - - tmp = 0; - for (i=0; i<length; i++) { - Byte = pbss_rates[i] & 0x7f; - for (j=0; j<12; j++) { - if( Byte == Rate[j] ) - break; - } - - if (j < 12) - tmp |= (tmp1<<j); - } - - reg->M28_MacControl |= tmp; - Wb35Reg_Write( pHwData, 0x0828, reg->M28_MacControl ); - - // 930206.2.c M78 setting - j = k = Count1 = Count2 = 0; - memset( SupportedRate, 0, 16 ); - tmp = 0x00100000; - tmp1 = 0x00000100; - for (i=0; i<12; i++) { // Get the supported rate - if (tmp & reg->M28_MacControl) { - SupportedRate[j] = Rate[i]; - - if (tmp1 & reg->M28_MacControl) - SupportedRate[j] |= 0x80; - - if (k) - Count2++; - else - Count1++; - - j++; - } - - if (i==4 && k==0) { - if( !(reg->M28_MacControl & 0x000ff000) ) // if basic rate in 11g domain) - { - k = 1; - j = 8; - } - } - - tmp <<= 1; - tmp1 <<= 1; - } - - // Fill data into support rate until buffer full - //---20060926 add by anson's endian - for (i=0; i<4; i++) - *(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) ); - //--- end 20060926 add by anson's endian - Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT ); - reg->M7C_MacControl = ((u32 *)SupportedRate)[0]; - reg->M80_MacControl = ((u32 *)SupportedRate)[1]; - reg->M84_MacControl = ((u32 *)SupportedRate)[2]; - reg->M88_MacControl = ((u32 *)SupportedRate)[3]; - - // Fill length - tmp = Count1<<28 | Count2<<24; - reg->M78_ERPInformation &= ~0xff000000; - reg->M78_ERPInformation |= tmp; - Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation ); -} - - -//--------------------------------------------------------------------------------------------------- void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ) { u32 tmp; @@ -476,7 +383,7 @@ void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ) } -void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ) +static void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ) { struct wb35_reg *reg = &pHwData->reg; @@ -502,12 +409,6 @@ void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ) hal_set_current_channel_ex( pHwData, channel ); } //--------------------------------------------------------------------------------------------------- -void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel ) -{ - channel->ChanNo = pHwData->Channel; - channel->band = pHwData->band; -} -//--------------------------------------------------------------------------------------------------- void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable ) { struct wb35_reg *reg = &pHwData->reg; @@ -565,46 +466,6 @@ void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ) Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl ); } //--------------------------------------------------------------------------------------------------- -void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ) -{ - struct wb35_reg *reg = &pHwData->reg; - u8 Byte, Bit; - - if( pHwData->SurpriseRemove ) return; - - //Erases and refills the card multicast registers. Used when an address - // has been deleted and all bits must be recomputed. - reg->M04_MulticastAddress1 = 0; - reg->M08_MulticastAddress2 = 0; - - while( number ) - { - number--; - CardGetMulticastBit( (address+(number*ETH_LENGTH_OF_ADDRESS)), &Byte, &Bit); - reg->Multicast[Byte] |= Bit; - } - - // Updating register - Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)reg->Multicast, 2, AUTO_INCREMENT ); -} -//--------------------------------------------------------------------------------------------------- -u8 hal_get_accept_beacon( phw_data_t pHwData ) -{ - struct wb35_reg *reg = &pHwData->reg; - - if( pHwData->SurpriseRemove ) return 0; - - if( reg->M00_MacControl & 0x04000000 ) - return 1; - else - return 0; -} - -unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa ) -{ - // Not implement yet - return true; -} void hal_stop( phw_data_t pHwData ) { @@ -631,115 +492,11 @@ unsigned char hal_idle(phw_data_t pHwData) return true; } //--------------------------------------------------------------------------------------------------- -void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min ) -{ - struct wb35_reg *reg = &pHwData->reg; - - if( pHwData->SurpriseRemove ) return; - - pHwData->cwmin = cwin_min; - reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14 - reg->M2C_MacControl |= (pHwData->cwmin<<10); - Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl ); -} - -s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ) -{ - struct wb35_reg *reg = &pHwData->reg; - R01_DESCRIPTOR r01; - s32 ltmp = 0, tmp; - u8 i; - - if( pHwData->SurpriseRemove ) return -200; - if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion - Count = MAX_ACC_RSSI_COUNT; - - // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) - // C1 = -195, C2 = 0.66 = 85/128 - for (i=0; i<Count; i++) - { - r01.value = HalRssiArry[i]; - tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - } - ltmp /= Count; - if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; - if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this - - //if( ltmp < -200 ) ltmp = -200; - if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC - - return ltmp; -} -//---------------------------------------------------------------------------------------------------- -s32 hal_get_rssi_bss(struct wbsoft_priv *adapter, u16 idx, u8 Count) -{ - phw_data_t pHwData = &adapter->sHwData; - struct wb35_reg *reg = &pHwData->reg; - R01_DESCRIPTOR r01; - s32 ltmp = 0, tmp; - u8 i, j; -// u32 *HalRssiArry = psBSS(idx)->HalRssi; - - if( pHwData->SurpriseRemove ) return -200; - if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion - Count = MAX_ACC_RSSI_COUNT; - - // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) - // C1 = -195, C2 = 0.66 = 85/128 -#if 0 - for (i=0; i<Count; i++) - { - r01.value = HalRssiArry[i]; - tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - } -#else - if (psBSS(idx)->HalRssiIndex == 0) - psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT; - j = (u8)psBSS(idx)->HalRssiIndex-1; - - for (i=0; i<Count; i++) - { - r01.value = psBSS(idx)->HalRssi[j]; - tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - if (j == 0) - { - j = MAX_ACC_RSSI_COUNT; - } - j--; - } -#endif - ltmp /= Count; - if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; - if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this - - //if( ltmp < -200 ) ltmp = -200; - if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC - - return ltmp; -} - -//--------------------------------------------------------------------------- - void hal_set_phy_type( phw_data_t pHwData, u8 PhyType ) { pHwData->phy_type = PhyType; } -void hal_get_phy_type( phw_data_t pHwData, u8 *PhyType ) -{ - *PhyType = pHwData->phy_type; -} - -void hal_reset_counter( phw_data_t pHwData ) -{ - pHwData->dto_tx_retry_count = 0; - pHwData->dto_tx_frag_count = 0; - memset( pHwData->tx_retry_count, 0, 8); -} - void hal_set_radio_mode( phw_data_t pHwData, unsigned char radio_off) { struct wb35_reg *reg = &pHwData->reg; @@ -769,22 +526,6 @@ u8 hal_get_antenna_number( phw_data_t pHwData ) return 1; } -void hal_set_antenna_number( phw_data_t pHwData, u8 number ) -{ - - struct wb35_reg *reg = &pHwData->reg; - - if (number == 1) { - reg->BB2C |= BIT(11); - } else { - reg->BB2C &= ~BIT(11); - } - Wb35Reg_Write( pHwData, 0x102c, reg->BB2C ); -#ifdef _PE_STATE_DUMP_ - WBDEBUG(("Current antenna number : %d\n", number)); -#endif -} - //---------------------------------------------------------------------------------------------------- //0 : radio on; 1: radio off u8 hal_get_hw_radio_off( phw_data_t pHwData ) @@ -821,57 +562,7 @@ unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ) return ret; } -void hal_scan_status_indicate(phw_data_t pHwData, unsigned char IsOnProgress) -{ - if( pHwData->SurpriseRemove ) return; - pHwData->LED_Scanning = IsOnProgress ? 1 : 0; -} - -void hal_system_power_change(phw_data_t pHwData, u32 PowerState) -{ - if( PowerState != 0 ) - { - pHwData->SurpriseRemove = 1; - if( pHwData->WbUsb.IsUsb20 ) - hal_stop( pHwData ); - } - else - { - if( !pHwData->WbUsb.IsUsb20 ) - hal_stop( pHwData ); - } -} - -void hal_surprise_remove(struct wbsoft_priv *adapter) -{ - phw_data_t pHwData = &adapter->sHwData; - - if (atomic_inc_return( &pHwData->SurpriseRemoveCount ) == 1) { - #ifdef _PE_STATE_DUMP_ - WBDEBUG(("Calling hal_surprise_remove\n")); - #endif - } -} - -void hal_rate_change(struct wbsoft_priv *adapter) // Notify the HAL rate is changing 20060613.1 -{ - phw_data_t pHwData = &adapter->sHwData; - u8 rate = CURRENT_TX_RATE; - - BBProcessor_RateChanging( pHwData, rate ); -} - void hal_set_rf_power(phw_data_t pHwData, u8 PowerIndex) { RFSynthesizer_SetPowerIndex( pHwData, PowerIndex ); } - -unsigned char hal_set_LED(phw_data_t pHwData, u32 Mode) // 20061108 for WPS led control -{ - pHwData->LED_Blinking = 0; - pHwData->LED_control = Mode; - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(10); - add_timer(&pHwData->LEDTimer); - return true; -} - diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h index dc5709f5a52..e805f40f635 100644 --- a/drivers/staging/winbond/wbhal_f.h +++ b/drivers/staging/winbond/wbhal_f.h @@ -26,9 +26,6 @@ void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, u void hal_get_power_save_mode( phw_data_t pHwData, u8 *pin_pwr_save ); void hal_set_slot_time( phw_data_t pHwData, u8 type ); #define hal_set_atim_window( _A, _ATM ) -void hal_set_rates( phw_data_t pHwData, u8 *pbss_rates, u8 length, unsigned char basic_rate_set ); -#define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE ) -#define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE ) void hal_start_bss( phw_data_t pHwData, u8 mac_op_mode ); void hal_join_request( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS STA// void hal_stop_sync_bss( phw_data_t pHwData ); @@ -41,35 +38,23 @@ void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval ); void hal_set_cap_info( phw_data_t pHwData, u16 capability_info ); void hal_set_ssid( phw_data_t pHwData, u8 *pssid, u8 ssid_len ); void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ); -void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ); -void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel ); void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable ); void hal_set_accept_multicast( phw_data_t pHwData, u8 enable ); void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ); -void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ); -u8 hal_get_accept_beacon( phw_data_t pHwData ); void hal_stop( phw_data_t pHwData ); void hal_halt( phw_data_t pHwData, void *ppa_data ); void hal_start_tx0( phw_data_t pHwData ); void hal_set_phy_type( phw_data_t pHwData, u8 PhyType ); -void hal_get_phy_type( phw_data_t pHwData, u8 *PhyType ); -unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa ); -void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min ); #define hal_get_cwmin( _A ) ( (_A)->cwmin ) void hal_set_cwmax( phw_data_t pHwData, u16 cwin_max ); #define hal_get_cwmax( _A ) ( (_A)->cwmax ) void hal_set_rsn_wpa( phw_data_t pHwData, u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode); -//s32 hal_get_rssi( phw_data_t pHwData, u32 HalRssi ); -s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ); -s32 hal_get_rssi_bss(struct wbsoft_priv *adapter, u16 idx, u8 Count); void hal_set_connect_info( phw_data_t pHwData, unsigned char boConnect ); u8 hal_get_est_sq3( phw_data_t pHwData, u8 Count ); void hal_set_rf_power( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify -void hal_reset_counter( phw_data_t pHwData ); void hal_set_radio_mode( phw_data_t pHwData, unsigned char boValue); void hal_descriptor_indicate( phw_data_t pHwData, PDESCRIPTOR pDes ); u8 hal_get_antenna_number( phw_data_t pHwData ); -void hal_set_antenna_number( phw_data_t pHwData, u8 number ); u32 hal_get_bss_pk_cnt( phw_data_t pHwData ); #define hal_get_region_from_EEPROM( _A ) ( (_A)->reg.EEPROMRegion ) void hal_set_accept_promiscuous ( phw_data_t pHwData, u8 enable); @@ -80,20 +65,13 @@ u8 hal_get_hw_radio_off ( phw_data_t pHwData ); #define hal_rssi_boundary_high( _A ) (_A->RSSI_high) #define hal_rssi_boundary_low( _A ) (_A->RSSI_low) #define hal_scan_interval( _A ) (_A->Scan_Interval) -void hal_scan_status_indicate( phw_data_t pHwData, u8 status); // 0: complete, 1: in progress -void hal_system_power_change( phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 .. -void hal_surprise_remove(struct wbsoft_priv *adapter); #define PHY_DEBUG( msg, args... ) - - -void hal_rate_change(struct wbsoft_priv *adapter); // Notify the HAL rate is changing 20060613.1 unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, u32 * pValue ); unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ); #define hal_get_time_count( _P ) (_P->time_count/10) // return 100ms count #define hal_detect_error( _P ) (_P->WbUsb.DetectCount) -unsigned char hal_set_LED( phw_data_t pHwData, u32 Mode ); // 20061108 for WPS led control //------------------------------------------------------------------------- // The follow function is unused for IS89C35 |