drivers/net: ks8851_mll ethernet network driver

This is the first registration of ks8851 network driver with
MLL(address/data multiplexed) interface.

Signed-off-by : David J. Choi <david.choi@micrel.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 1705 insertions, 0 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2bea67c134f..712776089b4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1738,6 +1738,13 @@ config KS8851
        help
          SPI driver for Micrel KS8851 SPI attached network chip.
 
+config KS8851_MLL
+	tristate "Micrel KS8851 MLL"
+	depends on HAS_IOMEM
+	help
+	  This platform driver is for Micrel KS8851 Address/data bus
+	  multiplexed network chip.
+
 config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on NET_PCI && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ae8cd30f13d..d866b8cf65d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_KS8851)	+= ks8851.o
+obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
new file mode 100644
index 00000000000..0be14d702be
--- /dev/null
+++ b/drivers/net/ks8851_mll.c
@@ -0,0 +1,1697 @@
+/**
+ * drivers/net/ks8851_mll.c
+ * Copyright (c) 2009 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/**
+ * Supports:
+ * KS8851 16bit MLL chip from Micrel Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define	DRV_NAME	"ks8851_mll"
+
+static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
+#define MAX_RECV_FRAMES			32
+#define MAX_BUF_SIZE			2048
+#define TX_BUF_SIZE			2000
+#define RX_BUF_SIZE			2000
+
+#define KS_CCR				0x08
+#define CCR_EEPROM			(1 << 9)
+#define CCR_SPI				(1 << 8)
+#define CCR_8BIT			(1 << 7)
+#define CCR_16BIT			(1 << 6)
+#define CCR_32BIT			(1 << 5)
+#define CCR_SHARED			(1 << 4)
+#define CCR_32PIN			(1 << 0)
+
+/* MAC address registers */
+#define KS_MARL				0x10
+#define KS_MARM				0x12
+#define KS_MARH				0x14
+
+#define KS_OBCR				0x20
+#define OBCR_ODS_16MA			(1 << 6)
+
+#define KS_EEPCR			0x22
+#define EEPCR_EESA			(1 << 4)
+#define EEPCR_EESB			(1 << 3)
+#define EEPCR_EEDO			(1 << 2)
+#define EEPCR_EESCK			(1 << 1)
+#define EEPCR_EECS			(1 << 0)
+
+#define KS_MBIR				0x24
+#define MBIR_TXMBF			(1 << 12)
+#define MBIR_TXMBFA			(1 << 11)
+#define MBIR_RXMBF			(1 << 4)
+#define MBIR_RXMBFA			(1 << 3)
+
+#define KS_GRR				0x26
+#define GRR_QMU				(1 << 1)
+#define GRR_GSR				(1 << 0)
+
+#define KS_WFCR				0x2A
+#define WFCR_MPRXE			(1 << 7)
+#define WFCR_WF3E			(1 << 3)
+#define WFCR_WF2E			(1 << 2)
+#define WFCR_WF1E			(1 << 1)
+#define WFCR_WF0E			(1 << 0)
+
+#define KS_WF0CRC0			0x30
+#define KS_WF0CRC1			0x32
+#define KS_WF0BM0			0x34
+#define KS_WF0BM1			0x36
+#define KS_WF0BM2			0x38
+#define KS_WF0BM3			0x3A
+
+#define KS_WF1CRC0			0x40
+#define KS_WF1CRC1			0x42
+#define KS_WF1BM0			0x44
+#define KS_WF1BM1			0x46
+#define KS_WF1BM2			0x48
+#define KS_WF1BM3			0x4A
+
+#define KS_WF2CRC0			0x50
+#define KS_WF2CRC1			0x52
+#define KS_WF2BM0			0x54
+#define KS_WF2BM1			0x56
+#define KS_WF2BM2			0x58
+#define KS_WF2BM3			0x5A
+
+#define KS_WF3CRC0			0x60
+#define KS_WF3CRC1			0x62
+#define KS_WF3BM0			0x64
+#define KS_WF3BM1			0x66
+#define KS_WF3BM2			0x68
+#define KS_WF3BM3			0x6A
+
+#define KS_TXCR				0x70
+#define TXCR_TCGICMP			(1 << 8)
+#define TXCR_TCGUDP			(1 << 7)
+#define TXCR_TCGTCP			(1 << 6)
+#define TXCR_TCGIP			(1 << 5)
+#define TXCR_FTXQ			(1 << 4)
+#define TXCR_TXFCE			(1 << 3)
+#define TXCR_TXPE			(1 << 2)
+#define TXCR_TXCRC			(1 << 1)
+#define TXCR_TXE			(1 << 0)
+
+#define KS_TXSR				0x72
+#define TXSR_TXLC			(1 << 13)
+#define TXSR_TXMC			(1 << 12)
+#define TXSR_TXFID_MASK			(0x3f << 0)
+#define TXSR_TXFID_SHIFT		(0)
+#define TXSR_TXFID_GET(_v)		(((_v) >> 0) & 0x3f)
+
+
+#define KS_RXCR1			0x74
+#define RXCR1_FRXQ			(1 << 15)
+#define RXCR1_RXUDPFCC			(1 << 14)
+#define RXCR1_RXTCPFCC			(1 << 13)
+#define RXCR1_RXIPFCC			(1 << 12)
+#define RXCR1_RXPAFMA			(1 << 11)
+#define RXCR1_RXFCE			(1 << 10)
+#define RXCR1_RXEFE			(1 << 9)
+#define RXCR1_RXMAFMA			(1 << 8)
+#define RXCR1_RXBE			(1 << 7)
+#define RXCR1_RXME			(1 << 6)
+#define RXCR1_RXUE			(1 << 5)
+#define RXCR1_RXAE			(1 << 4)
+#define RXCR1_RXINVF			(1 << 1)
+#define RXCR1_RXE			(1 << 0)
+#define RXCR1_FILTER_MASK    		(RXCR1_RXINVF | RXCR1_RXAE | \
+					 RXCR1_RXMAFMA | RXCR1_RXPAFMA)
+
+#define KS_RXCR2			0x76
+#define RXCR2_SRDBL_MASK		(0x7 << 5)
+#define RXCR2_SRDBL_SHIFT		(5)
+#define RXCR2_SRDBL_4B			(0x0 << 5)
+#define RXCR2_SRDBL_8B			(0x1 << 5)
+#define RXCR2_SRDBL_16B			(0x2 << 5)
+#define RXCR2_SRDBL_32B			(0x3 << 5)
+/* #define RXCR2_SRDBL_FRAME		(0x4 << 5) */
+#define RXCR2_IUFFP			(1 << 4)
+#define RXCR2_RXIUFCEZ			(1 << 3)
+#define RXCR2_UDPLFE			(1 << 2)
+#define RXCR2_RXICMPFCC			(1 << 1)
+#define RXCR2_RXSAF			(1 << 0)
+
+#define KS_TXMIR			0x78
+
+#define KS_RXFHSR			0x7C
+#define RXFSHR_RXFV			(1 << 15)
+#define RXFSHR_RXICMPFCS		(1 << 13)
+#define RXFSHR_RXIPFCS			(1 << 12)
+#define RXFSHR_RXTCPFCS			(1 << 11)
+#define RXFSHR_RXUDPFCS			(1 << 10)
+#define RXFSHR_RXBF			(1 << 7)
+#define RXFSHR_RXMF			(1 << 6)
+#define RXFSHR_RXUF			(1 << 5)
+#define RXFSHR_RXMR			(1 << 4)
+#define RXFSHR_RXFT			(1 << 3)
+#define RXFSHR_RXFTL			(1 << 2)
+#define RXFSHR_RXRF			(1 << 1)
+#define RXFSHR_RXCE			(1 << 0)
+#define	RXFSHR_ERR			(RXFSHR_RXCE | RXFSHR_RXRF |\
+					RXFSHR_RXFTL | RXFSHR_RXMR |\
+					RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\
+					RXFSHR_RXTCPFCS)
+#define KS_RXFHBCR			0x7E
+#define RXFHBCR_CNT_MASK		0x0FFF
+
+#define KS_TXQCR			0x80
+#define TXQCR_AETFE			(1 << 2)
+#define TXQCR_TXQMAM			(1 << 1)
+#define TXQCR_METFE			(1 << 0)
+
+#define KS_RXQCR			0x82
+#define RXQCR_RXDTTS			(1 << 12)
+#define RXQCR_RXDBCTS			(1 << 11)
+#define RXQCR_RXFCTS			(1 << 10)
+#define RXQCR_RXIPHTOE			(1 << 9)
+#define RXQCR_RXDTTE			(1 << 7)
+#define RXQCR_RXDBCTE			(1 << 6)
+#define RXQCR_RXFCTE			(1 << 5)
+#define RXQCR_ADRFE			(1 << 4)
+#define RXQCR_SDA			(1 << 3)
+#define RXQCR_RRXEF			(1 << 0)
+#define RXQCR_CMD_CNTL                	(RXQCR_RXFCTE|RXQCR_ADRFE)
+
+#define KS_TXFDPR			0x84
+#define TXFDPR_TXFPAI			(1 << 14)
+#define TXFDPR_TXFP_MASK		(0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT		(0)
+
+#define KS_RXFDPR			0x86
+#define RXFDPR_RXFPAI			(1 << 14)
+
+#define KS_RXDTTR			0x8C
+#define KS_RXDBCTR			0x8E
+
+#define KS_IER				0x90
+#define KS_ISR				0x92
+#define IRQ_LCI				(1 << 15)
+#define IRQ_TXI				(1 << 14)
+#define IRQ_RXI				(1 << 13)
+#define IRQ_RXOI			(1 << 11)
+#define IRQ_TXPSI			(1 << 9)
+#define IRQ_RXPSI			(1 << 8)
+#define IRQ_TXSAI			(1 << 6)
+#define IRQ_RXWFDI			(1 << 5)
+#define IRQ_RXMPDI			(1 << 4)
+#define IRQ_LDI				(1 << 3)
+#define IRQ_EDI				(1 << 2)
+#define IRQ_SPIBEI			(1 << 1)
+#define IRQ_DEDI			(1 << 0)
+
+#define KS_RXFCTR			0x9C
+#define RXFCTR_THRESHOLD_MASK     	0x00FF
+
+#define KS_RXFC				0x9D
+#define RXFCTR_RXFC_MASK		(0xff << 8)
+#define RXFCTR_RXFC_SHIFT		(8)
+#define RXFCTR_RXFC_GET(_v)		(((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK		(0xff << 0)
+#define RXFCTR_RXFCT_SHIFT		(0)
+
+#define KS_TXNTFSR			0x9E
+
+#define KS_MAHTR0			0xA0
+#define KS_MAHTR1			0xA2
+#define KS_MAHTR2			0xA4
+#define KS_MAHTR3			0xA6
+
+#define KS_FCLWR			0xB0
+#define KS_FCHWR			0xB2
+#define KS_FCOWR			0xB4
+
+#define KS_CIDER			0xC0
+#define CIDER_ID			0x8870
+#define CIDER_REV_MASK			(0x7 << 1)
+#define CIDER_REV_SHIFT			(1)
+#define CIDER_REV_GET(_v)		(((_v) >> 1) & 0x7)
+
+#define KS_CGCR				0xC6
+#define KS_IACR				0xC8
+#define IACR_RDEN			(1 << 12)
+#define IACR_TSEL_MASK			(0x3 << 10)
+#define IACR_TSEL_SHIFT			(10)
+#define IACR_TSEL_MIB			(0x3 << 10)
+#define IACR_ADDR_MASK			(0x1f << 0)
+#define IACR_ADDR_SHIFT			(0)
+
+#define KS_IADLR			0xD0
+#define KS_IAHDR			0xD2
+
+#define KS_PMECR			0xD4
+#define PMECR_PME_DELAY			(1 << 14)
+#define PMECR_PME_POL			(1 << 12)
+#define PMECR_WOL_WAKEUP		(1 << 11)
+#define PMECR_WOL_MAGICPKT		(1 << 10)
+#define PMECR_WOL_LINKUP		(1 << 9)
+#define PMECR_WOL_ENERGY		(1 << 8)
+#define PMECR_AUTO_WAKE_EN		(1 << 7)
+#define PMECR_WAKEUP_NORMAL		(1 << 6)
+#define PMECR_WKEVT_MASK		(0xf << 2)
+#define PMECR_WKEVT_SHIFT		(2)
+#define PMECR_WKEVT_GET(_v)		(((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY		(0x1 << 2)
+#define PMECR_WKEVT_LINK		(0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT		(0x4 << 2)
+#define PMECR_WKEVT_FRAME		(0x8 << 2)
+#define PMECR_PM_MASK			(0x3 << 0)
+#define PMECR_PM_SHIFT			(0)
+#define PMECR_PM_NORMAL			(0x0 << 0)
+#define PMECR_PM_ENERGY			(0x1 << 0)
+#define PMECR_PM_SOFTDOWN		(0x2 << 0)
+#define PMECR_PM_POWERSAVE		(0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR			0xE4
+#define P1MBCR_FORCE_FDX		(1 << 8)
+
+#define KS_P1MBSR			0xE6
+#define P1MBSR_AN_COMPLETE		(1 << 5)
+#define P1MBSR_AN_CAPABLE		(1 << 3)
+#define P1MBSR_LINK_UP			(1 << 2)
+
+#define KS_PHY1ILR			0xE8
+#define KS_PHY1IHR			0xEA
+#define KS_P1ANAR			0xEC
+#define KS_P1ANLPR			0xEE
+
+#define KS_P1SCLMD			0xF4
+#define P1SCLMD_LEDOFF			(1 << 15)
+#define P1SCLMD_TXIDS			(1 << 14)
+#define P1SCLMD_RESTARTAN		(1 << 13)
+#define P1SCLMD_DISAUTOMDIX		(1 << 10)
+#define P1SCLMD_FORCEMDIX		(1 << 9)
+#define P1SCLMD_AUTONEGEN		(1 << 7)
+#define P1SCLMD_FORCE100		(1 << 6)
+#define P1SCLMD_FORCEFDX		(1 << 5)
+#define P1SCLMD_ADV_FLOW		(1 << 4)
+#define P1SCLMD_ADV_100BT_FDX		(1 << 3)
+#define P1SCLMD_ADV_100BT_HDX		(1 << 2)
+#define P1SCLMD_ADV_10BT_FDX		(1 << 1)
+#define P1SCLMD_ADV_10BT_HDX		(1 << 0)
+
+#define KS_P1CR				0xF6
+#define P1CR_HP_MDIX			(1 << 15)
+#define P1CR_REV_POL			(1 << 13)
+#define P1CR_OP_100M			(1 << 10)
+#define P1CR_OP_FDX			(1 << 9)
+#define P1CR_OP_MDI			(1 << 7)
+#define P1CR_AN_DONE			(1 << 6)
+#define P1CR_LINK_GOOD			(1 << 5)
+#define P1CR_PNTR_FLOW			(1 << 4)
+#define P1CR_PNTR_100BT_FDX		(1 << 3)
+#define P1CR_PNTR_100BT_HDX		(1 << 2)
+#define P1CR_PNTR_10BT_FDX		(1 << 1)
+#define P1CR_PNTR_10BT_HDX		(1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC			(1 << 15)
+#define TXFR_TXFID_MASK			(0x3f << 0)
+#define TXFR_TXFID_SHIFT		(0)
+
+#define KS_P1SR				0xF8
+#define P1SR_HP_MDIX			(1 << 15)
+#define P1SR_REV_POL			(1 << 13)
+#define P1SR_OP_100M			(1 << 10)
+#define P1SR_OP_FDX			(1 << 9)
+#define P1SR_OP_MDI			(1 << 7)
+#define P1SR_AN_DONE			(1 << 6)
+#define P1SR_LINK_GOOD			(1 << 5)
+#define P1SR_PNTR_FLOW			(1 << 4)
+#define P1SR_PNTR_100BT_FDX		(1 << 3)
+#define P1SR_PNTR_100BT_HDX		(1 << 2)
+#define P1SR_PNTR_10BT_FDX		(1 << 1)
+#define P1SR_PNTR_10BT_HDX		(1 << 0)
+
+#define	ENUM_BUS_NONE			0
+#define	ENUM_BUS_8BIT			1
+#define	ENUM_BUS_16BIT			2
+#define	ENUM_BUS_32BIT			3
+
+#define MAX_MCAST_LST			32
+#define HW_MCAST_SIZE			8
+#define MAC_ADDR_LEN			6
+
+/**
+ * union ks_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks_tx_hdr {
+	u8      txb[4];
+	__le16  txw[2];
+};
+
+/**
+ * struct ks_net - KS8851 driver private data
+ * @net_device 	: The network device we're bound to
+ * @hw_addr	: start address of data register.
+ * @hw_addr_cmd	: start address of command register.
+ * @txh    	: temporaly buffer to save status/length.
+ * @lock	: Lock to ensure that the device is not accessed when busy.
+ * @pdev	: Pointer to platform device.
+ * @mii		: The MII state information for the mii calls.
+ * @frame_head_info   	: frame header information for multi-pkt rx.
+ * @statelock	: Lock on this structure for tx list.
+ * @msg_enable	: The message flags controlling driver output (see ethtool).
+ * @frame_cnt  	: number of frames received.
+ * @bus_width  	: i/o bus width.
+ * @irq    	: irq number assigned to this device.
+ * @rc_rxqcr	: Cached copy of KS_RXQCR.
+ * @rc_txcr	: Cached copy of KS_TXCR.
+ * @rc_ier	: Cached copy of KS_IER.
+ * @sharedbus  	: Multipex(addr and data bus) mode indicator.
+ * @cmd_reg_cache	: command register cached.
+ * @cmd_reg_cache_int	: command register cached. Used in the irq handler.
+ * @promiscuous	: promiscuous mode indicator.
+ * @all_mcast  	: mutlicast indicator.
+ * @mcast_lst_size   	: size of multicast list.
+ * @mcast_lst    	: multicast list.
+ * @mcast_bits    	: multicast enabed.
+ * @mac_addr   		: MAC address assigned to this device.
+ * @fid    		: frame id.
+ * @extra_byte    	: number of extra byte prepended rx pkt.
+ * @enabled    		: indicator this device works.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not accessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ */
+
+/* Receive multiplex framer header info */
+struct type_frame_head {
+	u16	sts;         /* Frame status */
+	u16	len;         /* Byte count */
+};
+
+struct ks_net {
+	struct net_device	*netdev;
+	void __iomem    	*hw_addr;
+	void __iomem    	*hw_addr_cmd;
+	union ks_tx_hdr		txh ____cacheline_aligned;
+	struct mutex      	lock; /* spinlock to be interrupt safe */
+	struct platform_device *pdev;
+	struct mii_if_info	mii;
+	struct type_frame_head	*frame_head_info;
+	spinlock_t		statelock;
+	u32			msg_enable;
+	u32			frame_cnt;
+	int			bus_width;
+	int             	irq;
+
+	u16			rc_rxqcr;
+	u16			rc_txcr;
+	u16			rc_ier;
+	u16			sharedbus;
+	u16			cmd_reg_cache;
+	u16			cmd_reg_cache_int;
+	u16			promiscuous;
+	u16			all_mcast;
+	u16			mcast_lst_size;
+	u8			mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN];
+	u8			mcast_bits[HW_MCAST_SIZE];
+	u8			mac_addr[6];
+	u8                      fid;
+	u8			extra_byte;
+	u8			enabled;
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define BE3             0x8000      /* Byte Enable 3 */
+#define BE2             0x4000      /* Byte Enable 2 */
+#define BE1             0x2000      /* Byte Enable 1 */
+#define BE0             0x1000      /* Byte Enable 0 */
+
+/**
+ * register read/write calls.
+ *
+ * All these calls issue transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks_rdreg8 - read 8 bit register from device
+ * @ks	  : The chip information
+ * @offset: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+ */
+static u8 ks_rdreg8(struct ks_net *ks, int offset)
+{
+	u16 data;
+	u8 shift_bit = offset & 0x03;
+	u8 shift_data = (offset & 1) << 3;
+	ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit);
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	data  = ioread16(ks->hw_addr);
+	return (u8)(data >> shift_data);
+}
+
+/**
+ * ks_rdreg16 - read 16 bit register from device
+ * @ks	  : The chip information
+ * @offset: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+ */
+
+static u16 ks_rdreg16(struct ks_net *ks, int offset)
+{
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	return ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_wrreg8 - write 8bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
+{
+	u8  shift_bit = (offset & 0x03);
+	u16 value_write = (u16)(value << ((offset & 1) << 3));
+	ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit);
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	iowrite16(value_write, ks->hw_addr);
+}
+
+/**
+ * ks_wrreg16 - write 16bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+
+static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
+{
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+	iowrite16(value, ks->hw_addr);
+}
+
+/**
+ * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip state
+ * @wptr: buffer address to save data
+ * @len: length in byte to read
+ *
+ */
+static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+	len >>= 1;
+	while (len--)
+		*wptr++ = (u16)ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip information
+ * @wptr: buffer address
+ * @len: length in byte to write
+ *
+ */
+static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+	len >>= 1;
+	while (len--)
+		iowrite16(*wptr++, ks->hw_addr);
+}
+
+/**
+ * ks_tx_fifo_space - return the available hardware buffer size.
+ * @ks: The chip information
+ *
+ */
+static inline u16 ks_tx_fifo_space(struct ks_net *ks)
+{
+	return ks_rdreg16(ks, KS_TXMIR) & 0x1fff;
+}
+
+/**
+ * ks_save_cmd_reg - save the command register from the cache.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_save_cmd_reg(struct ks_net *ks)
+{
+	/*ks8851 MLL has a bug to read back the command register.
+	* So rely on software to save the content of command register.
+	*/
+	ks->cmd_reg_cache_int = ks->cmd_reg_cache;
+}
+
+/**
+ * ks_restore_cmd_reg - restore the command register from the cache and
+ * 	write to hardware register.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_restore_cmd_reg(struct ks_net *ks)
+{
+	ks->cmd_reg_cache = ks->cmd_reg_cache_int;
+	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+}
+
+/**
+ * ks_set_powermode - set power mode of the device
+ * @ks: The chip information
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode)
+{
+	unsigned pmecr;
+
+	if (netif_msg_hw(ks))
+		ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+	ks_rdreg16(ks, KS_GRR);
+	pmecr = ks_rdreg16(ks, KS_PMECR);
+	pmecr &= ~PMECR_PM_MASK;
+	pmecr |= pwrmode;
+
+	ks_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks_read_config - read chip configuration of bus width.
+ * @ks: The chip information
+ *
+ */
+static void ks_read_config(struct ks_net *ks)
+{
+	u16 reg_data = 0;
+
+	/* Regardless of bus width, 8 bit read should always work.*/
+	reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF;
+	reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8;
+
+	/* addr/data bus are multiplexed */
+	ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED;
+
+	/* There are garbage data when reading data from QMU,
+	depending on bus-width.
+	*/
+
+	if (reg_data & CCR_8BIT) {
+		ks->bus_width = ENUM_BUS_8BIT;
+		ks->extra_byte = 1;
+	} else if (reg_data & CCR_16BIT) {
+		ks->bus_width = ENUM_BUS_16BIT;
+		ks->extra_byte = 2;
+	} else {
+		ks->bus_width = ENUM_BUS_32BIT;
+		ks->extra_byte = 4;
+	}
+}
+
+/**
+ * ks_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks_soft_reset(struct ks_net *ks, unsigned op)
+{
+	/* Disable interrupt first */
+	ks_wrreg16(ks, KS_IER, 0x0000);
+	ks_wrreg16(ks, KS_GRR, op);
+	mdelay(10);	/* wait a short time to effect reset */
+	ks_wrreg16(ks, KS_GRR, 0);
+	mdelay(1);	/* wait for condition to clear */
+}
+
+
+/**
+ * ks_read_qmu - read 1 pkt data from the QMU.
+ * @ks: The chip information
+ * @buf: buffer address to save 1 pkt
+ * @len: Pkt length
+ * Here is the sequence to read 1 pkt:
+ *	1. set sudo DMA mode
+ *	2. read prepend data
+ *	3. read pkt data
+ *	4. reset sudo DMA Mode
+ */
+static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
+{
+	u32 r =  ks->extra_byte & 0x1 ;
+	u32 w = ks->extra_byte - r;
+
+	/* 1. set sudo DMA mode */
+	ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+
+	/* 2. read prepend data */
+	/**
+	 * read 4 + extra bytes and discard them.
+	 * extra bytes for dummy, 2 for status, 2 for len
+	 */
+
+	/* use likely(r) for 8 bit access for performance */
+	if (unlikely(r))
+		ioread8(ks->hw_addr);
+	ks_inblk(ks, buf, w + 2 + 2);
+
+	/* 3. read pkt data */
+	ks_inblk(ks, buf, ALIGN(len, 4));
+
+	/* 4. reset sudo DMA Mode */
+	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+}
+
+/**
+ * ks_rcv - read multiple pkts data from the QMU.
+ * @ks: The chip information
+ * @netdev: The network device being opened.
+ *
+ * Read all of header information before reading pkt content.
+ * It is not allowed only port of pkts in QMU after issuing
+ * interrupt ack.
+ */
+static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
+{
+	u32	i;
+	struct type_frame_head *frame_hdr = ks->frame_head_info;
+	struct sk_buff *skb;
+
+	ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8;
+
+	/* read all header information */
+	for (i = 0; i < ks->frame_cnt; i++) {
+		/* Checking Received packet status */
+		frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR);
+		/* Get packet len from hardware */
+		frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR);
+		frame_hdr++;
+	}
+
+	frame_hdr = ks->frame_head_info;
+	while (ks->frame_cnt--) {
+		skb = dev_alloc_skb(frame_hdr->len + 16);
+		if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) &&
+			(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
+			skb_reserve(skb, 2);
+			/* read data block including CRC 4 bytes */
+			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+			skb_put(skb, frame_hdr->len);
+			skb->dev = netdev;
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+		} else {
+			printk(KERN_ERR "%s: err:skb alloc\n", __func__);
+			ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF));
+			if (skb)
+				dev_kfree_skb_irq(skb);
+		}
+		frame_hdr++;
+	}
+}
+
+/**
+ * ks_update_link_status - link status update.
+ * @netdev: The network device being opened.
+ * @ks: The chip information
+ *
+ */
+
+static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
+{
+	/* check the status of the link */
+	u32 link_up_status;
+	if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) {
+		netif_carrier_on(netdev);
+		link_up_status = true;
+	} else {
+		netif_carrier_off(netdev);
+		link_up_status = false;
+	}
+	if (netif_msg_link(ks))
+		ks_dbg(ks, "%s: %s\n",
+			__func__, link_up_status ? "UP" : "DOWN");
+}
+
+/**
+ * ks_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks_net.
+ *
+ * This is the handler invoked to find out what happened
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+
+static irqreturn_t ks_irq(int irq, void *pw)
+{
+	struct ks_net *ks = pw;
+	struct net_device *netdev = ks->netdev;
+	u16 status;
+
+	/*this should be the first in IRQ handler */
+	ks_save_cmd_reg(ks);
+
+	status = ks_rdreg16(ks, KS_ISR);
+	if (unlikely(!status)) {
+		ks_restore_cmd_reg(ks);
+		return IRQ_NONE;
+	}
+
+	ks_wrreg16(ks, KS_ISR, status);
+
+	if (likely(status & IRQ_RXI))
+		ks_rcv(ks, netdev);
+
+	if (unlikely(status & IRQ_LCI))
+		ks_update_link_status(netdev, ks);
+
+	if (unlikely(status & IRQ_TXI))
+		netif_wake_queue(netdev);
+
+	if (unlikely(status & IRQ_LDI)) {
+
+		u16 pmecr = ks_rdreg16(ks, KS_PMECR);
+		pmecr &= ~PMECR_WKEVT_MASK;
+		ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+	}
+
+	/* this should be the last in IRQ handler*/
+	ks_restore_cmd_reg(ks);
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * ks_net_open - open network device
+ * @netdev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks_net_open(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int err;
+
+#define	KS_INT_FLAGS	(IRQF_DISABLED|IRQF_TRIGGER_LOW)
+	/* lock the card, even if we may not actually do anything
+	 * else at the moment.
+	 */
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "%s - entry\n", __func__);
+
+	/* reset the HW */
+	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+
+	if (err) {
+		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+			ks->irq, err);
+		return err;
+	}
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "network device %s up\n", netdev->name);
+
+	return 0;
+}
+
+/**
+ * ks_net_stop - close network device
+ * @netdev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks_net_stop(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+
+	if (netif_msg_ifdown(ks))
+		ks_info(ks, "%s: shutting down\n", netdev->name);
+
+	netif_stop_queue(netdev);
+
+	kfree(ks->frame_head_info);
+
+	mutex_lock(&ks->lock);
+
+	/* turn off the IRQs and ack any outstanding */
+	ks_wrreg16(ks, KS_IER, 0x0000);
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+
+	/* shutdown RX process */
+	ks_wrreg16(ks, KS_RXCR1, 0x0000);
+
+	/* shutdown TX process */
+	ks_wrreg16(ks, KS_TXCR, 0x0000);
+
+	/* set powermode to soft power down to save power */
+	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
+	free_irq(ks->irq, netdev);
+	mutex_unlock(&ks->lock);
+	return 0;
+}
+
+
+/**
+ * ks_write_qmu - write 1 pkt data to the QMU.
+ * @ks: The chip information
+ * @pdata: buffer address to save 1 pkt
+ * @len: Pkt length in byte
+ * Here is the sequence to write 1 pkt:
+ *	1. set sudo DMA mode
+ *	2. write status/length
+ *	3. write pkt data
+ *	4. reset sudo DMA Mode
+ *	5. reset sudo DMA mode
+ *	6. Wait until pkt is out
+ */
+static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
+{
+	unsigned fid = ks->fid;
+
+	fid = ks->fid;
+	ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
+
+	/* reduce the tx interrupt occurrances. */
+	if (!fid)
+		fid |= TXFR_TXIC;       /* irq on completion */
+
+	/* start header at txb[0] to align txw entries */
+	ks->txh.txw[0] = cpu_to_le16(fid);
+	ks->txh.txw[1] = cpu_to_le16(len);
+
+	/* 1. set sudo-DMA mode */
+	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+	/* 2. write status/lenth info */
+	ks_outblk(ks, ks->txh.txw, 4);
+	/* 3. write pkt data */
+	ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4));
+	/* 4. reset sudo-DMA mode */
+	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+	/* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */
+	ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+	/* 6. wait until TXQCR_METFE is auto-cleared */
+	while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE)
+		;
+}
+
+static void ks_disable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
+/**
+ * ks_start_xmit - transmit packet
+ * @skb		: The buffer to transmit
+ * @netdev	: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb.
+ * spin_lock_irqsave is required because tx and rx should be mutual exclusive.
+ * So while tx is in-progress, prevent IRQ interrupt from happenning.
+ */
+static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	int retv = NETDEV_TX_OK;
+	struct ks_net *ks = netdev_priv(netdev);
+
+	disable_irq(netdev->irq);
+	ks_disable_int(ks);
+	spin_lock(&ks->statelock);
+
+	/* Extra space are required:
+	*  4 byte for alignment, 4 for status/length, 4 for CRC
+	*/
+
+	if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) {
+		ks_write_qmu(ks, skb->data, skb->len);
+		dev_kfree_skb(skb);
+	} else
+		retv = NETDEV_TX_BUSY;
+	spin_unlock(&ks->statelock);
+	ks_enable_int(ks);
+	enable_irq(netdev->irq);
+	return retv;
+}
+
+/**
+ * ks_start_rx - ready to serve pkts
+ * @ks		: The chip information
+ *
+ */
+static void ks_start_rx(struct ks_net *ks)
+{
+	u16 cntl;
+
+	/* Enables QMU Receive (RXCR1). */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl |= RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+}  /* ks_start_rx */
+
+/**
+ * ks_stop_rx - stop to serve pkts
+ * @ks		: The chip information
+ *
+ */
+static void ks_stop_rx(struct ks_net *ks)
+{
+	u16 cntl;
+
+	/* Disables QMU Receive (RXCR1). */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+}  /* ks_stop_rx */
+
+static unsigned long const ethernet_polynomial = 0x04c11db7U;
+
+static unsigned long ether_gen_crc(int length, u8 *data)
+{
+	long crc = -1;
+	while (--length >= 0) {
+		u8 current_octet = *data++;
+		int bit;
+
+		for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+			crc = (crc << 1) ^
+				((crc < 0) ^ (current_octet & 1) ?
+			ethernet_polynomial : 0);
+		}
+	}
+	return (unsigned long)crc;
+}  /* ether_gen_crc */
+
+/**
+* ks_set_grpaddr - set multicast information
+* @ks : The chip information
+*/
+
+static void ks_set_grpaddr(struct ks_net *ks)
+{
+	u8	i;
+	u32	index, position, value;
+
+	memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE);
+
+	for (i = 0; i < ks->mcast_lst_size; i++) {
+		position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f;
+		index = position >> 3;
+		value = 1 << (position & 7);
+		ks->mcast_bits[index] |= (u8)value;
+	}
+
+	for (i  = 0; i < HW_MCAST_SIZE; i++) {
+		if (i & 1) {
+			ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1),
+				(ks->mcast_bits[i] << 8) |
+				ks->mcast_bits[i - 1]);
+		}
+	}
+}  /* ks_set_grpaddr */
+
+/*
+* ks_clear_mcast - clear multicast information
+*
+* @ks : The chip information
+* This routine removes all mcast addresses set in the hardware.
+*/
+
+static void ks_clear_mcast(struct ks_net *ks)
+{
+	u16	i, mcast_size;
+	for (i = 0; i < HW_MCAST_SIZE; i++)
+		ks->mcast_bits[i] = 0;
+
+	mcast_size = HW_MCAST_SIZE >> 2;
+	for (i = 0; i < mcast_size; i++)
+		ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0);
+}
+
+static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode)
+{
+	u16		cntl;
+	ks->promiscuous = promiscuous_mode;
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+
+	cntl &= ~RXCR1_FILTER_MASK;
+	if (promiscuous_mode)
+		/* Enable Promiscuous mode */
+		cntl |= RXCR1_RXAE | RXCR1_RXINVF;
+	else
+		/* Disable Promiscuous mode (default normal mode) */
+		cntl |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+
+}  /* ks_set_promis */
+
+static void ks_set_mcast(struct ks_net *ks, u16 mcast)
+{
+	u16	cntl;
+
+	ks->all_mcast = mcast;
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+	cntl = ks_rdreg16(ks, KS_RXCR1);
+	cntl &= ~RXCR1_FILTER_MASK;
+	if (mcast)
+		/* Enable "Perfect with Multicast address passed mode" */
+		cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+	else
+		/**
+		 * Disable "Perfect with Multicast address passed
+		 * mode" (normal mode).
+		 */
+		cntl |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, cntl);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+}  /* ks_set_mcast */
+
+static void ks_set_rx_mode(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	struct dev_mc_list *ptr;
+
+	/* Turn on/off promiscuous mode. */
+	if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC)
+		ks_set_promis(ks,
+			(u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC));
+	/* Turn on/off all mcast mode. */
+	else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)
+		ks_set_mcast(ks,
+			(u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI));
+	else
+		ks_set_promis(ks, false);
+
+	if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) {
+		if (netdev->mc_count <= MAX_MCAST_LST) {
+			int i = 0;
+			for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
+				if (!(*ptr->dmi_addr & 1))
+					continue;
+				if (i >= MAX_MCAST_LST)
+					break;
+				memcpy(ks->mcast_lst[i++], ptr->dmi_addr,
+				MAC_ADDR_LEN);
+			}
+			ks->mcast_lst_size = (u8)i;
+			ks_set_grpaddr(ks);
+		} else {
+			/**
+			 * List too big to support so
+			 * turn on all mcast mode.
+			 */
+			ks->mcast_lst_size = MAX_MCAST_LST;
+			ks_set_mcast(ks, true);
+		}
+	} else {
+		ks->mcast_lst_size = 0;
+		ks_clear_mcast(ks);
+	}
+} /* ks_set_rx_mode */
+
+static void ks_set_mac(struct ks_net *ks, u8 *data)
+{
+	u16 *pw = (u16 *)data;
+	u16 w, u;
+
+	ks_stop_rx(ks);  /* Stop receiving for reconfiguration */
+
+	u = *pw++;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARH, w);
+
+	u = *pw++;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARM, w);
+
+	u = *pw;
+	w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+	ks_wrreg16(ks, KS_MARL, w);
+
+	memcpy(ks->mac_addr, data, 6);
+
+	if (ks->enabled)
+		ks_start_rx(ks);
+}
+
+static int ks_set_mac_address(struct net_device *netdev, void *paddr)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	struct sockaddr *addr = paddr;
+	u8 *da;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	da = (u8 *)netdev->dev_addr;
+
+	ks_set_mac(ks, da);
+	return 0;
+}
+
+static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks_netdev_ops = {
+	.ndo_open		= ks_net_open,
+	.ndo_stop		= ks_net_stop,
+	.ndo_do_ioctl		= ks_net_ioctl,
+	.ndo_start_xmit		= ks_start_xmit,
+	.ndo_set_mac_address	= ks_set_mac_address,
+	.ndo_set_rx_mode	= ks_set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks_get_drvinfo(struct net_device *netdev,
+			       struct ethtool_drvinfo *di)
+{
+	strlcpy(di->driver, DRV_NAME, sizeof(di->driver));
+	strlcpy(di->version, "1.00", sizeof(di->version));
+	strlcpy(di->bus_info, dev_name(netdev->dev.parent),
+		sizeof(di->bus_info));
+}
+
+static u32 ks_get_msglevel(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return ks->msg_enable;
+}
+
+static void ks_set_msglevel(struct net_device *netdev, u32 to)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	ks->msg_enable = to;
+}
+
+static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks_get_link(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_link_ok(&ks->mii);
+}
+
+static int ks_nway_reset(struct net_device *netdev)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks_ethtool_ops = {
+	.get_drvinfo	= ks_get_drvinfo,
+	.get_msglevel	= ks_get_msglevel,
+	.set_msglevel	= ks_set_msglevel,
+	.get_settings	= ks_get_settings,
+	.set_settings	= ks_set_settings,
+	.get_link	= ks_get_link,
+	.nway_reset	= ks_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks_phy_reg(int reg)
+{
+	switch (reg) {
+	case MII_BMCR:
+		return KS_P1MBCR;
+	case MII_BMSR:
+		return KS_P1MBSR;
+	case MII_PHYSID1:
+		return KS_PHY1ILR;
+	case MII_PHYSID2:
+		return KS_PHY1IHR;
+	case MII_ADVERTISE:
+		return KS_P1ANAR;
+	case MII_LPA:
+		return KS_P1ANLPR;
+	}
+
+	return 0x0;
+}
+
+/**
+ * ks_phy_read - MII interface PHY register read.
+ * @netdev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int ksreg;
+	int result;
+
+	ksreg = ks_phy_reg(reg);
+	if (!ksreg)
+		return 0x0;	/* no error return allowed, so use zero */
+
+	mutex_lock(&ks->lock);
+	result = ks_rdreg16(ks, ksreg);
+	mutex_unlock(&ks->lock);
+
+	return result;
+}
+
+static void ks_phy_write(struct net_device *netdev,
+			     int phy, int reg, int value)
+{
+	struct ks_net *ks = netdev_priv(netdev);
+	int ksreg;
+
+	ksreg = ks_phy_reg(reg);
+	if (ksreg) {
+		mutex_lock(&ks->lock);
+		ks_wrreg16(ks, ksreg, value);
+		mutex_unlock(&ks->lock);
+	}
+}
+
+/**
+ * ks_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks_read_selftest(struct ks_net *ks)
+{
+	unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+	int ret = 0;
+	unsigned rd;
+
+	rd = ks_rdreg16(ks, KS_MBIR);
+
+	if ((rd & both_done) != both_done) {
+		ks_warn(ks, "Memory selftest not finished\n");
+		return 0;
+	}
+
+	if (rd & MBIR_TXMBFA) {
+		ks_err(ks, "TX memory selftest fails\n");
+		ret |= 1;
+	}
+
+	if (rd & MBIR_RXMBFA) {
+		ks_err(ks, "RX memory selftest fails\n");
+		ret |= 2;
+	}
+
+	ks_info(ks, "the selftest passes\n");
+	return ret;
+}
+
+static void ks_disable(struct ks_net *ks)
+{
+	u16	w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+
+	/* Disables QMU Transmit (TXCR). */
+	w  &= ~TXCR_TXE;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	/* Disables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	w &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, w);
+
+	ks->enabled = false;
+
+}  /* ks_disable */
+
+static void ks_setup(struct ks_net *ks)
+{
+	u16	w;
+
+	/**
+	 * Configure QMU Transmit
+	 */
+
+	/* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */
+	ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+	/* Setup Receive Frame Data Pointer Auto-Increment */
+	ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+
+	/* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */
+	ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK);
+
+	/* Setup RxQ Command Control (RXQCR) */
+	ks->rc_rxqcr = RXQCR_CMD_CNTL;
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+	/**
+	 * set the force mode to half duplex, default is full duplex
+	 *  because if the auto-negotiation fails, most switch uses
+	 *  half-duplex.
+	 */
+
+	w = ks_rdreg16(ks, KS_P1MBCR);
+	w &= ~P1MBCR_FORCE_FDX;
+	ks_wrreg16(ks, KS_P1MBCR, w);
+
+	w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+
+	if (ks->promiscuous)         /* bPromiscuous */
+		w |= (RXCR1_RXAE | RXCR1_RXINVF);
+	else if (ks->all_mcast) /* Multicast address passed mode */
+		w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+	else                                   /* Normal mode */
+		w |= RXCR1_RXPAFMA;
+
+	ks_wrreg16(ks, KS_RXCR1, w);
+}  /*ks_setup */
+
+
+static void ks_setup_int(struct ks_net *ks)
+{
+	ks->rc_ier = 0x00;
+	/* Clear the interrupts status of the hardware. */
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+
+	/* Enables the interrupts of the hardware. */
+	ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
+}  /* ks_setup_int */
+
+void ks_enable(struct ks_net *ks)
+{
+	u16 w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+	/* Enables QMU Transmit (TXCR). */
+	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+	/*
+	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+	 * Enable
+	 */
+
+	w = ks_rdreg16(ks, KS_RXQCR);
+	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+	/* Enables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+	ks->enabled = true;
+}  /* ks_enable */
+
+static int ks_hw_init(struct ks_net *ks)
+{
+#define	MHEADER_SIZE	(sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
+	ks->promiscuous = 0;
+	ks->all_mcast = 0;
+	ks->mcast_lst_size = 0;
+
+	ks->frame_head_info = (struct type_frame_head *) \
+		kmalloc(MHEADER_SIZE, GFP_KERNEL);
+	if (!ks->frame_head_info) {
+		printk(KERN_ERR "Error: Fail to allocate frame memory\n");
+		return false;
+	}
+
+	ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS);
+	return true;
+}
+
+
+static int __devinit ks8851_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct resource *io_d, *io_c;
+	struct net_device *netdev;
+	struct ks_net *ks;
+	u16 id, data;
+
+	io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+	if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME))
+		goto err_mem_region;
+
+	if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME))
+		goto err_mem_region1;
+
+	netdev = alloc_etherdev(sizeof(struct ks_net));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	ks = netdev_priv(netdev);
+	ks->netdev = netdev;
+	ks->hw_addr = ioremap(io_d->start, resource_size(io_d));
+
+	if (!ks->hw_addr)
+		goto err_ioremap;
+
+	ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c));
+	if (!ks->hw_addr_cmd)
+		goto err_ioremap1;
+
+	ks->irq = platform_get_irq(pdev, 0);
+
+	if (ks->irq < 0) {
+		err = ks->irq;
+		goto err_get_irq;
+	}
+
+	ks->pdev = pdev;
+
+	mutex_init(&ks->lock);
+	spin_lock_init(&ks->statelock);
+
+	netdev->netdev_ops = &ks_netdev_ops;
+	netdev->ethtool_ops = &ks_ethtool_ops;
+
+	/* setup mii state */
+	ks->mii.dev             = netdev;
+	ks->mii.phy_id          = 1,
+	ks->mii.phy_id_mask     = 1;
+	ks->mii.reg_num_mask    = 0xf;
+	ks->mii.mdio_read       = ks_phy_read;
+	ks->mii.mdio_write      = ks_phy_write;
+
+	ks_info(ks, "message enable is %d\n", msg_enable);
+	/* set the default message enable */
+	ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+						     NETIF_MSG_PROBE |
+						     NETIF_MSG_LINK));
+	ks_read_config(ks);
+
+	/* simple check for a valid chip being connected to the bus */
+	if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+		ks_err(ks, "failed to read device ID\n");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	if (ks_read_selftest(ks)) {
+		ks_err(ks, "failed to read device ID\n");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	platform_set_drvdata(pdev, netdev);
+
+	ks_soft_reset(ks, GRR_GSR);
+	ks_hw_init(ks);
+	ks_disable(ks);
+	ks_setup(ks);
+	ks_setup_int(ks);
+	ks_enable_int(ks);
+	ks_enable(ks);
+	memcpy(netdev->dev_addr, ks->mac_addr, 6);
+
+	data = ks_rdreg16(ks, KS_OBCR);
+	ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA);
+
+	/**
+	 * If you want to use the default MAC addr,
+	 * comment out the 2 functions below.
+	 */
+
+	random_ether_addr(netdev->dev_addr);
+	ks_set_mac(ks, netdev->dev_addr);
+
+	id = ks_rdreg16(ks, KS_CIDER);
+
+	printk(KERN_INFO DRV_NAME
+		" Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+	return 0;
+
+err_register:
+err_get_irq:
+	iounmap(ks->hw_addr_cmd);
+err_ioremap1:
+	iounmap(ks->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	release_mem_region(io_c->start, resource_size(io_c));
+err_mem_region1:
+	release_mem_region(io_d->start, resource_size(io_d));
+err_mem_region:
+	return err;
+}
+
+static int __devexit ks8851_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct ks_net *ks = netdev_priv(netdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	unregister_netdev(netdev);
+	iounmap(ks->hw_addr);
+	free_netdev(netdev);
+	release_mem_region(iomem->start, resource_size(iomem));
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+
+}
+
+static struct platform_driver ks8851_platform_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = ks8851_probe,
+	.remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+	return platform_driver_register(&ks8851_platform_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+	platform_driver_unregister(&ks8851_platform_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 MLL Network driver");
+MODULE_AUTHOR("David Choi <david.choi@micrel.com>");
+MODULE_LICENSE("GPL");
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+