[POWERPC] fsl_elbc_nand: factor out localbus defines

This is needed to support other localbus peripherals, such as
NAND on FSL UPM.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 235 insertions, 207 deletions

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b025dfe0b27..378b7aa6381 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -36,207 +36,12 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-
+#include <asm/fsl_lbc.h>
 
 #define MAX_BANKS 8
 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
 #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
 
-struct elbc_bank {
-	__be32 br;             /**< Base Register  */
-#define BR_BA           0xFFFF8000
-#define BR_BA_SHIFT             15
-#define BR_PS           0x00001800
-#define BR_PS_SHIFT             11
-#define BR_PS_8         0x00000800  /* Port Size 8 bit */
-#define BR_PS_16        0x00001000  /* Port Size 16 bit */
-#define BR_PS_32        0x00001800  /* Port Size 32 bit */
-#define BR_DECC         0x00000600
-#define BR_DECC_SHIFT            9
-#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
-#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
-#define BR_WP           0x00000100
-#define BR_WP_SHIFT              8
-#define BR_MSEL         0x000000E0
-#define BR_MSEL_SHIFT            5
-#define BR_MS_GPCM      0x00000000  /* GPCM */
-#define BR_MS_FCM       0x00000020  /* FCM */
-#define BR_MS_SDRAM     0x00000060  /* SDRAM */
-#define BR_MS_UPMA      0x00000080  /* UPMA */
-#define BR_MS_UPMB      0x000000A0  /* UPMB */
-#define BR_MS_UPMC      0x000000C0  /* UPMC */
-#define BR_V            0x00000001
-#define BR_V_SHIFT               0
-#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
-	__be32 or;             /**< Base Register  */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM               0xFFFF8000
-#define OR_FCM_AM_SHIFT                 15
-#define OR_FCM_BCTLD            0x00001000
-#define OR_FCM_BCTLD_SHIFT              12
-#define OR_FCM_PGS              0x00000400
-#define OR_FCM_PGS_SHIFT                10
-#define OR_FCM_CSCT             0x00000200
-#define OR_FCM_CSCT_SHIFT                9
-#define OR_FCM_CST              0x00000100
-#define OR_FCM_CST_SHIFT                 8
-#define OR_FCM_CHT              0x00000080
-#define OR_FCM_CHT_SHIFT                 7
-#define OR_FCM_SCY              0x00000070
-#define OR_FCM_SCY_SHIFT                 4
-#define OR_FCM_SCY_1            0x00000010
-#define OR_FCM_SCY_2            0x00000020
-#define OR_FCM_SCY_3            0x00000030
-#define OR_FCM_SCY_4            0x00000040
-#define OR_FCM_SCY_5            0x00000050
-#define OR_FCM_SCY_6            0x00000060
-#define OR_FCM_SCY_7            0x00000070
-#define OR_FCM_RST              0x00000008
-#define OR_FCM_RST_SHIFT                 3
-#define OR_FCM_TRLX             0x00000004
-#define OR_FCM_TRLX_SHIFT                2
-#define OR_FCM_EHTR             0x00000002
-#define OR_FCM_EHTR_SHIFT                1
-};
-
-struct elbc_regs {
-	struct elbc_bank bank[8];
-	u8 res0[0x28];
-	__be32 mar;             /**< UPM Address Register */
-	u8 res1[0x4];
-	__be32 mamr;            /**< UPMA Mode Register */
-	__be32 mbmr;            /**< UPMB Mode Register */
-	__be32 mcmr;            /**< UPMC Mode Register */
-	u8 res2[0x8];
-	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
-	__be32 mdr;             /**< UPM Data Register */
-	u8 res3[0x4];
-	__be32 lsor;            /**< Special Operation Initiation Register */
-	__be32 lsdmr;           /**< SDRAM Mode Register */
-	u8 res4[0x8];
-	__be32 lurt;            /**< UPM Refresh Timer */
-	__be32 lsrt;            /**< SDRAM Refresh Timer */
-	u8 res5[0x8];
-	__be32 ltesr;           /**< Transfer Error Status Register */
-#define LTESR_BM   0x80000000
-#define LTESR_FCT  0x40000000
-#define LTESR_PAR  0x20000000
-#define LTESR_WP   0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS   0x00080000
-#define LTESR_CC   0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
-	__be32 ltedr;           /**< Transfer Error Disable Register */
-	__be32 lteir;           /**< Transfer Error Interrupt Register */
-	__be32 lteatr;          /**< Transfer Error Attributes Register */
-	__be32 ltear;           /**< Transfer Error Address Register */
-	u8 res6[0xC];
-	__be32 lbcr;            /**< Configuration Register */
-#define LBCR_LDIS  0x80000000
-#define LBCR_LDIS_SHIFT    31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT   22
-#define LBCR_AHD   0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT   17
-#define LBCR_EPAR  0x00010000
-#define LBCR_EPAR_SHIFT    16
-#define LBCR_BMT   0x0000FF00
-#define LBCR_BMT_SHIFT      8
-#define LBCR_INIT  0x00040000
-	__be32 lcrr;            /**< Clock Ratio Register */
-#define LCRR_DBYP    0x80000000
-#define LCRR_DBYP_SHIFT      31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT   28
-#define LCRR_ECL     0x03000000
-#define LCRR_ECL_SHIFT       24
-#define LCRR_EADC    0x00030000
-#define LCRR_EADC_SHIFT      16
-#define LCRR_CLKDIV  0x0000000F
-#define LCRR_CLKDIV_SHIFT     0
-	u8 res7[0x8];
-	__be32 fmr;             /**< Flash Mode Register */
-#define FMR_CWTO     0x0000F000
-#define FMR_CWTO_SHIFT       12
-#define FMR_BOOT     0x00000800
-#define FMR_ECCM     0x00000100
-#define FMR_AL       0x00000030
-#define FMR_AL_SHIFT          4
-#define FMR_OP       0x00000003
-#define FMR_OP_SHIFT          0
-	__be32 fir;             /**< Flash Instruction Register */
-#define FIR_OP0      0xF0000000
-#define FIR_OP0_SHIFT        28
-#define FIR_OP1      0x0F000000
-#define FIR_OP1_SHIFT        24
-#define FIR_OP2      0x00F00000
-#define FIR_OP2_SHIFT        20
-#define FIR_OP3      0x000F0000
-#define FIR_OP3_SHIFT        16
-#define FIR_OP4      0x0000F000
-#define FIR_OP4_SHIFT        12
-#define FIR_OP5      0x00000F00
-#define FIR_OP5_SHIFT         8
-#define FIR_OP6      0x000000F0
-#define FIR_OP6_SHIFT         4
-#define FIR_OP7      0x0000000F
-#define FIR_OP7_SHIFT         0
-#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
-#define FIR_OP_CA    0x1        /* Issue current column address */
-#define FIR_OP_PA    0x2        /* Issue current block+page address */
-#define FIR_OP_UA    0x3        /* Issue user defined address */
-#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
-#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
-	__be32 fcr;             /**< Flash Command Register */
-#define FCR_CMD0     0xFF000000
-#define FCR_CMD0_SHIFT       24
-#define FCR_CMD1     0x00FF0000
-#define FCR_CMD1_SHIFT       16
-#define FCR_CMD2     0x0000FF00
-#define FCR_CMD2_SHIFT        8
-#define FCR_CMD3     0x000000FF
-#define FCR_CMD3_SHIFT        0
-	__be32 fbar;            /**< Flash Block Address Register */
-#define FBAR_BLK     0x00FFFFFF
-	__be32 fpar;            /**< Flash Page Address Register */
-#define FPAR_SP_PI   0x00007C00
-#define FPAR_SP_PI_SHIFT     10
-#define FPAR_SP_MS   0x00000200
-#define FPAR_SP_CI   0x000001FF
-#define FPAR_SP_CI_SHIFT      0
-#define FPAR_LP_PI   0x0003F000
-#define FPAR_LP_PI_SHIFT     12
-#define FPAR_LP_MS   0x00000800
-#define FPAR_LP_CI   0x000007FF
-#define FPAR_LP_CI_SHIFT      0
-	__be32 fbcr;            /**< Flash Byte Count Register */
-#define FBCR_BC      0x00000FFF
-	u8 res11[0x8];
-	u8 res8[0xF00];
-};
-
 struct fsl_elbc_ctrl;
 
 /* mtd information per set */
@@ -261,7 +66,7 @@ struct fsl_elbc_ctrl {
 
 	/* device info */
 	struct device *dev;
-	struct elbc_regs __iomem *regs;
+	struct fsl_lbc_regs __iomem *regs;
 	int irq;
 	wait_queue_head_t irq_wait;
 	unsigned int irq_status; /* status read from LTESR by irq handler */
@@ -322,7 +127,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	int buf_num;
 
 	ctrl->page = page_addr;
@@ -363,7 +168,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* Setup the FMR[OP] to execute without write protection */
 	out_be32(&lbc->fmr, priv->fmr | 3);
@@ -406,7 +211,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
@@ -439,7 +244,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	ctrl->use_mdr = 0;
 
@@ -775,7 +580,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -807,7 +612,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
 
 	/* calculate FMR Address Length field */
@@ -922,7 +727,7 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct nand_chip *chip = &priv->chip;
 
 	dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -986,7 +791,7 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
                                struct device_node *node)
 {
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct fsl_elbc_mtd *priv;
 	struct resource res;
 #ifdef CONFIG_MTD_PARTITIONS
@@ -1083,7 +888,7 @@ err:
 
 static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 {
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* clear event registers */
 	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
@@ -1128,7 +933,7 @@ static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
 static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
 {
 	struct fsl_elbc_ctrl *ctrl = data;
-	struct elbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
 
 	if (status) {
diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h
new file mode 100644
index 00000000000..13a3c28e1e1
--- /dev/null
+++ b/include/asm-powerpc/fsl_lbc.h
@@ -0,0 +1,223 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+
+struct fsl_lbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct fsl_lbc_regs {
+	struct fsl_lbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+#endif /* __ASM_FSL_LBC_H */