aboutsummaryrefslogtreecommitdiff
path: root/Documentation/input/multi-touch-protocol.txt
diff options
context:
space:
mode:
authorIngo Molnar <mingo@elte.hu>2009-06-07 12:22:15 +0200
committerIngo Molnar <mingo@elte.hu>2009-06-07 12:22:15 +0200
commit5f4457a4f62cc9d78e04c0eb12ff0540899aad89 (patch)
tree0b973d527ea6b2ae31e08da0746b4965a3c5a6d8 /Documentation/input/multi-touch-protocol.txt
parent9b94b3a19b13e094c10f65f24bc358f6ffe4eacd (diff)
parentb87297fb405ef13cac375f202d114323b076a56d (diff)
Merge branch 'linus' into x86/cpu
Diffstat (limited to 'Documentation/input/multi-touch-protocol.txt')
-rw-r--r--Documentation/input/multi-touch-protocol.txt195
1 files changed, 195 insertions, 0 deletions
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
new file mode 100644
index 00000000000..a12ea3b586e
--- /dev/null
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -0,0 +1,195 @@
+Multi-touch (MT) Protocol
+-------------------------
+ Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation. The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted [4].
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same [4].
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular [4].
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique trackingID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the Synaptics X driver, and in addition
+implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.