Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	drivers/mtd/mtdcore.c

Merged in order that I can apply the Nomadik nand/onenand support patches.

1 files changed, 82 insertions, 0 deletions

diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */