Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
  [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
  [ARM] 3855/1: Add generic time support
  [ARM] 3873/1: S3C24XX: Add irq_chip names
  [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
  [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
  [ARM] nommu: confirms the CR_V bit in nommu mode
  [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
  [ARM] 3870/1: AT91: Start removing static memory mappings
  [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
  [ARM] 3868/1: AT91 hardware header update
  [ARM] 3867/1: AT91 GPIO update
  [ARM] 3866/1: AT91 clock update
  [ARM] 3865/1: AT91RM9200 header updates
  [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
  [ARM] kthread: switch arch/arm/kernel/apm.c
  [ARM] Off-by-one in arch/arm/common/icst*
  [ARM] 3864/1: Refactore sharpsl_pm
  [ARM] 3863/1: Add Locomo SPI Device
  [ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs
  [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
  ...

20 files changed, 0 insertions, 2102 deletions

diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
deleted file mode 100644
index 4422f238860..00000000000
--- a/arch/arm/mach-iop3xx/Kconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-if ARCH_IOP3XX
-
-menu "IOP3xx Implementation Options"
-
-comment "IOP3xx Platform Types"
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	select ARCH_IOP321
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ31244
-	bool "Enable support for IQ31244"
-	select ARCH_IOP321
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ31244
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ80331
-	bool "Enable support for IQ80331"
-	select ARCH_IOP331
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80331
-	  evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
-	bool "Enable support for IQ80332"
-	select ARCH_IOP331
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80332
-	  evaluation kit for the IOP332 chipset.
-
-config ARCH_EP80219
-	bool "Enable support for EP80219"
-	select ARCH_IOP321
-	select ARCH_IQ31244
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
-
-# Which IOP variant are we running?
-config ARCH_IOP321
-	bool
-	help
-	  The IQ80321 uses the IOP321 variant.
-	  The IQ31244 and EP80219 uses the IOP321 variant.
-
-config ARCH_IOP331
-	bool
-	default ARCH_IQ80331
-	help
-	  The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant.
-
-comment "IOP3xx Chipset Features"
-
-config IOP331_STEPD
-	bool "Chip stepping D of the IOP80331 processor or IOP80333"
-	depends on (ARCH_IOP331)
-	help
-	  Say Y here if you have StepD of the IOP80331 or IOP8033
-	  based platforms.
-
-endmenu
-endif
diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile
deleted file mode 100644
index b17eb1f4610..00000000000
--- a/arch/arm/mach-iop3xx/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o
-
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_IOP321)  += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
-
-obj-$(CONFIG_ARCH_IOP331)  += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
-
-obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
-
-obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
-
-obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o
diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot
deleted file mode 100644
index 6387aa20461..00000000000
--- a/arch/arm/mach-iop3xx/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-   zreladdr-y	:= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP331),y)
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
-
diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c
deleted file mode 100644
index d7f50e57e75..00000000000
--- a/arch/arm/mach-iop3xx/common.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/common.c
- *
- * Common routines shared across all IOP3xx implementations
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2003 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <asm/hardware.h>
-
-/*
- * Shared variables
- */
-unsigned long iop3xx_pcibios_min_io = 0;
-unsigned long iop3xx_pcibios_min_mem = 0;
-
-#ifdef CONFIG_ARCH_EP80219
-#include <linux/kernel.h>
-/*
- * Default power-off for EP80219
- */
-
-static inline void ep80219_send_to_pic(__u8 c) {
-}
-
-void ep80219_power_off(void)
-{
-	/*
-     * This function will send a SHUTDOWN_COMPLETE message to the PIC controller
-     * over I2C.  We are not using the i2c subsystem since we are going to power
-     * off and it may be removed
-     */
-
-	/* Send the Address byte w/ the start condition */
-	*IOP321_IDBR1 = 0x60;
-	*IOP321_ICR1 = 0xE9;
-    mdelay(1);
-
-	/* Send the START_MSG byte w/ no start or stop condition */
-	*IOP321_IDBR1 = 0x0F;
-	*IOP321_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
-	*IOP321_IDBR1 = 0x03;
-	*IOP321_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send an ignored byte w/ stop condition */
-	*IOP321_IDBR1 = 0x00;
-	*IOP321_ICR1 = 0xEA;
-
-	while (1) ;
-}
-
-#include <linux/init.h>
-#include <linux/pm.h>
-
-static int __init ep80219_init(void)
-{
-	pm_power_off = ep80219_power_off;
-	return 0;
-}
-arch_initcall(ep80219_init);
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c
deleted file mode 100644
index 88ac333472c..00000000000
--- a/arch/arm/mach-iop3xx/iop321-irq.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-irq.c
- *
- * Generic IOP321 IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Added IOP3XX chipset and IQ80321 board masking code.
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop321_mask /* = 0 */;
-
-static inline void intctl_write(u32 val)
-{
-	asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intstr_write(u32 val)
-{
-	asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val));
-}
-
-static void
-iop321_irq_mask (unsigned int irq)
-{
-
-	iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS));
-
-	intctl_write(iop321_mask);
-}
-
-static void
-iop321_irq_unmask (unsigned int irq)
-{
-	iop321_mask |= (1 << (irq - IOP321_IRQ_OFS));
-
-	intctl_write(iop321_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name	= "IOP",
-	.ack    = iop321_irq_mask,
-	.mask   = iop321_irq_mask,
-	.unmask = iop321_irq_unmask,
-};
-
-void __init iop321_init_irq(void)
-{
-	unsigned int i, tmp;
-
-	/* Enable access to coprocessor 6 for dealing with IRQs.
-	 * From RMK:
-	 * Basically, the Intel documentation here is poor.  It appears that
-	 * you need to set the bit to be able to access the coprocessor from
-	 * SVC mode.  Whether that allows access from user space or not is
-	 * unclear.
-	 */
-	asm volatile (
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"orr %0, %0, %1\n\t"
-		"mcr p15, 0, %0, c15, c1, 0\n\t"
-		/* The action is delayed, so we have to do this: */
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"mov %0, %0\n\t"
-		"sub pc, pc, #4"
-		: "=r" (tmp) : "i" (1 << 6) );
-
-	intctl_write(0);		// disable all interrupts
-	intstr_write(0);		// treat all as IRQ
-	if(machine_is_iq80321() ||
-	   machine_is_iq31244()) 	// all interrupts are inputs to chip
-		*IOP321_PCIIRSR = 0x0f;
-
-	for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++)
-	{
-		set_irq_chip(i, &ext_chip);
-		set_irq_handler(i, do_level_IRQ);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
-	}
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c
deleted file mode 100644
index 8ba6a0e2313..00000000000
--- a/arch/arm/mach-iop3xx/iop321-pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-pci.c
- *
- * PCI support for the Intel IOP321 chipset
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop321.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80321 then a type0 made, else a type1 is created.
- */
-static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop321_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP321_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP321_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP321_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP321_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop321_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val = iop321_read(addr) >> ((where & 3) * 8);
-
-	if( iop321_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop321_read(addr);
-		if (!iop321_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP321_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop321_ops = {
-	.read	= iop321_read_config,
-	.write	= iop321_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP321 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop321_ops, sys);
-}
-
-void iop321_init(void)
-{
-	DBG("PCI:  Intel 80321 PCI init code.\n");
-	DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD);
-	DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n",
-			*IOP321_OMWTVR0,
-			*IOP321_OIOWTVR);
-	DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR);
-	DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n",
-			*IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0);
-	DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0);
-	DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n",
-			*IOP321_IABAR1, *IOP321_IALR1);
-	DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n",
-			*IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR);
-	DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n",
-			*IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2);
-	DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n",
-			*IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3);
-
-	hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
deleted file mode 100644
index b6d096903c4..00000000000
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-setup.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP321_UART_XTAL 1843200
-
-/*
- * Standard IO mapping for all IOP321 based systems
- */
-static struct map_desc iop321_std_desc[] __initdata = {
-	 {	/* mem mapped registers */
-		.virtual	= IOP321_VIRT_MEM_BASE,
-		.pfn		= __phys_to_pfn(IOP321_PHYS_MEM_BASE),
-		.length		= 0x00002000,
-		.type		= MT_DEVICE
-	 }, {	/* PCI IO space */
-		.virtual	= IOP321_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
-		.length		= IOP321_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE
-	 }
-};
-
-#ifdef CONFIG_ARCH_IQ80321
-#define UARTBASE IQ80321_UART
-#define IRQ_UART IRQ_IQ80321_UART
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-#define UARTBASE IQ31244_UART
-#define IRQ_UART IRQ_IQ31244_UART
-#endif
-
-static struct uart_port iop321_serial_ports[] = {
-	{
-		.membase	= (char*)(UARTBASE),
-		.mapbase	= (UARTBASE),
-		.irq		= IRQ_UART,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= IOP321_UART_XTAL,
-		.line		= 0,
-		.type		= PORT_16550A,
-		.fifosize	= 16
-	}
-};
-
-static struct resource iop32x_i2c_0_resources[] = {
-	[0] = {
-		.start = 0xfffff680,
-		.end = 0xfffff698,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP321_I2C_0,
-		.end = IRQ_IOP321_I2C_0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop32x_i2c_1_resources[] = {
-	[0] = {
-		.start = 0xfffff6a0,
-		.end = 0xfffff6b8,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP321_I2C_1,
-		.end = IRQ_IOP321_I2C_1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device iop32x_i2c_0_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop32x_i2c_0_resources
-};
-
-static struct platform_device iop32x_i2c_1_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 1,
-	.num_resources = 2,
-	.resource = iop32x_i2c_1_resources
-};
-
-static struct platform_device *iop32x_devices[] __initdata = {
-	&iop32x_i2c_0_controller,
-	&iop32x_i2c_1_controller
-};
-
-void __init iop32x_init(void)
-{
-	if(iop_is_321())
-	{
-		platform_add_devices(iop32x_devices,
-				ARRAY_SIZE(iop32x_devices));
-	}
-}
-
-void __init iop321_map_io(void)
-{
-	iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc));
-	early_serial_setup(&iop321_serial_ports[0]);
-}
-
-#ifdef CONFIG_ARCH_IQ80321
-extern void iq80321_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-extern void iq31244_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80321)
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corporation */
-	.phys_io	= IQ80321_UART,
-	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#elif defined(CONFIG_ARCH_IQ31244)
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c
deleted file mode 100644
index 04b1a6f7eba..00000000000
--- a/arch/arm/mach-iop3xx/iop321-time.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-time.c
- *
- * Timer code for IOP321 based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#define IOP321_TIME_SYNC 0
-
-static inline unsigned long get_elapsed(void)
-{
-	return LATCH - *IOP321_TU_TCR0;
-}
-
-static unsigned long iop321_gettimeoffset(void)
-{
-	unsigned long elapsed, usec;
-	u32 tisr1, tisr2;
-
-	/*
-	 * If an interrupt was pending before we read the timer,
-	 * we've already wrapped.  Factor this into the time.
-	 * If an interrupt was pending after we read the timer,
-	 * it may have wrapped between checking the interrupt
-	 * status and reading the timer.  Re-read the timer to
-	 * be sure its value is after the wrap.
-	 */
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
-	elapsed = get_elapsed();
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
-	if(tisr1 & 1)
-		elapsed += LATCH;
-	else if (tisr2 & 1)
-		elapsed = LATCH + get_elapsed();
-
-	/*
-	 * Now convert them to usec.
-	 */
-	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
-	return usec;
-}
-
-static irqreturn_t
-iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	u32 tisr;
-
-	write_seqlock(&xtime_lock);
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
-	tisr |= 1;
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
-	timer_tick(regs);
-
-	write_sequnlock(&xtime_lock);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop321_timer_irq = {
-	.name		= "IOP321 Timer Tick",
-	.handler	= iop321_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop321_timer_init(void)
-{
-	u32 timer_ctl;
-
-	setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq);
-
-	timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD |
-			IOP321_TMR_RATIO_1_1;
-
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
-	asm volatile("mcr p6, 0, %0, c0, c1, 0"	: : "r" (timer_ctl));
-}
-
-struct sys_timer iop321_timer = {
-	.init		= &iop321_timer_init,
-	.offset		= iop321_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c
deleted file mode 100644
index cab11722ced..00000000000
--- a/arch/arm/mach-iop3xx/iop331-irq.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-irq.c
- *
- * Generic IOP331 IRQ handling functionality
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop331_mask0 = 0;
-static u32 iop331_mask1 = 0;
-
-static inline void intctl_write0(u32 val)
-{
-    // INTCTL0
-	asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intctl_write1(u32 val)
-{
-    // INTCTL1
-    asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val));
-}
-
-static inline void intstr_write0(u32 val)
-{
-    // INTSTR0
-	asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val));
-}
-
-static inline void intstr_write1(u32 val)
-{
-    // INTSTR1
-	asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val));
-}
-
-static void
-iop331_irq_mask1 (unsigned int irq)
-{
-        iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS));
-        intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_mask2 (unsigned int irq)
-{
-        iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32));
-        intctl_write1(iop331_mask1);
-}
-
-static void
-iop331_irq_unmask1(unsigned int irq)
-{
-        iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS));
-        intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_unmask2(unsigned int irq)
-{
-        iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32));
-        intctl_write1(iop331_mask1);
-}
-
-struct irq_chip iop331_irqchip1 = {
-	.name	= "IOP-1",
-	.ack    = iop331_irq_mask1,
-	.mask   = iop331_irq_mask1,
-	.unmask = iop331_irq_unmask1,
-};
-
-struct irq_chip iop331_irqchip2 = {
-	.name	= "IOP-2",
-	.ack    = iop331_irq_mask2,
-	.mask   = iop331_irq_mask2,
-	.unmask = iop331_irq_unmask2,
-};
-
-void __init iop331_init_irq(void)
-{
-	unsigned int i, tmp;
-
-	/* Enable access to coprocessor 6 for dealing with IRQs.
-	 * From RMK:
-	 * Basically, the Intel documentation here is poor.  It appears that
-	 * you need to set the bit to be able to access the coprocessor from
-	 * SVC mode.  Whether that allows access from user space or not is
-	 * unclear.
-	 */
-	asm volatile (
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"orr %0, %0, %1\n\t"
-		"mcr p15, 0, %0, c15, c1, 0\n\t"
-		/* The action is delayed, so we have to do this: */
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"mov %0, %0\n\t"
-		"sub pc, pc, #4"
-		: "=r" (tmp) : "i" (1 << 6) );
-
-	intctl_write0(0);		// disable all interrupts
-    	intctl_write1(0);
-	intstr_write0(0);		// treat all as IRQ
-    	intstr_write1(0);
-	if(machine_is_iq80331()) 	// all interrupts are inputs to chip
-		*IOP331_PCIIRSR = 0x0f;
-
-	for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++)
-	{
-		set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
-		set_irq_handler(i, do_level_IRQ);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c
deleted file mode 100644
index 44dd213b48a..00000000000
--- a/arch/arm/mach-iop3xx/iop331-pci.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-pci.c
- *
- * PCI support for the Intel IOP331 chipset
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop331.h>
-
-#undef DEBUG
-#undef DEBUG1
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-#ifdef DEBUG1
-#define  DBG1(x...) printk(x)
-#else
-#define  DBG1(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80331 then a type0 made, else a type1 is created.
- */
-static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop331_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP331_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP331_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP331_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP331_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop331_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val = iop331_read(addr) >> ((where & 3) * 8);
-
-	if( iop331_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop331_read(addr);
-		if (!iop331_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP331_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop331_ops = {
-	.read	= iop331_read_config,
-	.write	= iop331_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP331 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop331_ops, sys);
-}
-
-void iop331_init(void)
-{
-	DBG1("PCI:  Intel 80331 PCI init code.\n");
-	DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD);
-	DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n",
-			*IOP331_OMWTVR0,
-			*IOP331_OIOWTVR);
-	DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1);
-	DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR);
-	DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0);
-	DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1);
-	DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR);
-	DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2);
-	DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3);
-
-	hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
deleted file mode 100644
index 3cc98d892ad..00000000000
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-setup.c
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP331_UART_XTAL 33334000
-
-/*
- * Standard IO mapping for all IOP331 based systems
- */
-static struct map_desc iop331_std_desc[] __initdata = {
-	{	/* mem mapped registers */
-		.virtual	= IOP331_VIRT_MEM_BASE,
-		.pfn		= __phys_to_pfn(IOP331_PHYS_MEM_BASE),
-		.length		= 0x00002000,
-		.type		= MT_DEVICE
-	}, {	/* PCI IO space */
-		.virtual	= IOP331_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
-		.length		= IOP331_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource iop33x_uart0_resources[] = {
-	[0] = {
-		.start = IOP331_UART0_PHYS,
-		.end = IOP331_UART0_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_UART0,
-		.end = IRQ_IOP331_UART0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop33x_uart1_resources[] = {
-	[0] = {
-		.start = IOP331_UART1_PHYS,
-		.end = IOP331_UART1_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_UART1,
-		.end = IRQ_IOP331_UART1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct plat_serial8250_port iop33x_uart0_data[] = {
-	{
-       .membase     = (char*)(IOP331_UART0_VIRT),
-       .mapbase     = (IOP331_UART0_PHYS),
-       .irq         = IRQ_IOP331_UART0,
-       .uartclk     = IOP331_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-static struct plat_serial8250_port iop33x_uart1_data[] = {
-	{
-       .membase     = (char*)(IOP331_UART1_VIRT),
-       .mapbase     = (IOP331_UART1_PHYS),
-       .irq         = IRQ_IOP331_UART1,
-       .uartclk     = IOP331_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-static struct platform_device iop33x_uart0 = {
-       .name = "serial8250",
-       .id = PLAT8250_DEV_PLATFORM,
-       .dev.platform_data = iop33x_uart0_data,
-       .num_resources = 2,
-       .resource = iop33x_uart0_resources,
-};
-
-static struct platform_device iop33x_uart1 = {
-       .name = "serial8250",
-       .id = PLAT8250_DEV_PLATFORM1,
-       .dev.platform_data = iop33x_uart1_data,
-       .num_resources = 2,
-       .resource = iop33x_uart1_resources,
-};
-
-static struct resource iop33x_i2c_0_resources[] = {
-	[0] = {
-		.start = 0xfffff680,
-		.end = 0xfffff698,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_I2C_0,
-		.end = IRQ_IOP331_I2C_0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop33x_i2c_1_resources[] = {
-	[0] = {
-		.start = 0xfffff6a0,
-		.end = 0xfffff6b8,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_I2C_1,
-		.end = IRQ_IOP331_I2C_1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device iop33x_i2c_0_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop33x_i2c_0_resources
-};
-
-static struct platform_device iop33x_i2c_1_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 1,
-	.num_resources = 2,
-	.resource = iop33x_i2c_1_resources
-};
-
-static struct platform_device *iop33x_devices[] __initdata = {
-	&iop33x_uart0,
-	&iop33x_uart1,
-	&iop33x_i2c_0_controller,
-	&iop33x_i2c_1_controller
-};
-
-void __init iop33x_init(void)
-{
-	if(iop_is_331())
-	{
-		platform_add_devices(iop33x_devices,
-				ARRAY_SIZE(iop33x_devices));
-	}
-}
-
-void __init iop331_map_io(void)
-{
-	iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
-}
-
-#ifdef CONFIG_ARCH_IOP331
-extern void iop331_init_irq(void);
-extern struct sys_timer iop331_timer;
-#endif
-
-#ifdef CONFIG_ARCH_IQ80331
-extern void iq80331_map_io(void);
-#endif
-
-#ifdef CONFIG_MACH_IQ80332
-extern void iq80332_map_io(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80331)
-MACHINE_START(IQ80331, "Intel IQ80331")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
-	.map_io		= iq80331_map_io,
-	.init_irq	= iop331_init_irq,
-	.timer		= &iop331_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= iop33x_init,
-MACHINE_END
-
-#elif defined(CONFIG_MACH_IQ80332)
-MACHINE_START(IQ80332, "Intel IQ80332")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
-	.map_io		= iq80332_map_io,
-	.init_irq	= iop331_init_irq,
-	.timer		= &iop331_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= iop33x_init,
-MACHINE_END
-
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
-
-
diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c
deleted file mode 100644
index 0c09e74c574..00000000000
--- a/arch/arm/mach-iop3xx/iop331-time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-time.c
- *
- * Timer code for IOP331 based systems
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- *
- * Copyright 2003 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-static inline unsigned long get_elapsed(void)
-{
-	return LATCH - *IOP331_TU_TCR0;
-}
-
-static unsigned long iop331_gettimeoffset(void)
-{
-	unsigned long elapsed, usec;
-	u32 tisr1, tisr2;
-
-	/*
-	 * If an interrupt was pending before we read the timer,
-	 * we've already wrapped.  Factor this into the time.
-	 * If an interrupt was pending after we read the timer,
-	 * it may have wrapped between checking the interrupt
-	 * status and reading the timer.  Re-read the timer to
-	 * be sure its value is after the wrap.
-	 */
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
-	elapsed = get_elapsed();
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
-	if(tisr1 & 1)
-		elapsed += LATCH;
-	else if (tisr2 & 1)
-		elapsed = LATCH + get_elapsed();
-
-	/*
-	 * Now convert them to usec.
-	 */
-	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
-	return usec;
-}
-
-static irqreturn_t
-iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	u32 tisr;
-
-	write_seqlock(&xtime_lock);
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
-	tisr |= 1;
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
-	timer_tick(regs);
-
-	write_sequnlock(&xtime_lock);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop331_timer_irq = {
-	.name		= "IOP331 Timer Tick",
-	.handler	= iop331_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop331_timer_init(void)
-{
-	u32 timer_ctl;
-
-	setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq);
-
-	timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD |
-			IOP331_TMR_RATIO_1_1;
-
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
-	asm volatile("mcr p6, 0, %0, c0, c1, 0"	: : "r" (timer_ctl));
-
-}
-
-struct sys_timer iop331_timer = {
-	.init		= iop331_timer_init,
-	.offset		= iop331_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
deleted file mode 100644
index e874b54eefe..00000000000
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq31244_map_io(void)
-{
-	iop321_map_io();
-
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
deleted file mode 100644
index f3c6413fa5b..00000000000
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ31244_INTA
-#define INTB	IRQ_IQ31244_INTB
-#define INTC	IRQ_IQ31244_INTC
-#define INTD	IRQ_IQ31244_INTD
-
-#define INTE	IRQ_IQ31244_I82546
-
-static inline int __init
-iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-#ifdef CONFIG_ARCH_EP80219
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-#else
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTE, INTE, INTE, INTE}, /* 82546 GigE */
-#endif // CONFIG_ARCH_EP80219
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(0, 7);
-}
-
-static int iq31244_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ31244 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ31244 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq31244_preinit(void)
-{
-	iop321_init();
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq31244_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq31244_preinit,
-	.map_irq	= iq31244_map_irq
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (machine_is_iq31244())
-		pci_common_init(&iq31244_pci);
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
deleted file mode 100644
index d9cac5e1fc3..00000000000
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq80321_map_io(void)
-{
-	iop321_map_io();
-
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
deleted file mode 100644
index d9758d3f6e7..00000000000
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80321_INTA
-#define INTB	IRQ_IQ80321_INTB
-#define INTC	IRQ_IQ80321_INTC
-#define INTD	IRQ_IQ80321_INTD
-
-#define INTE	IRQ_IQ80321_I82544
-
-static inline int __init
-iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTE, INTE, INTE, INTE}, /* Gig-E */
-		{-1, -1, -1, -1}, 	  /* Unused */
-		{INTC, INTD, INTA, INTB}, /* PCI-X Slot */
-		{-1, -1, -1, -1},
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-//	return PCI_IRQ_TABLE_LOOKUP(4, 7);
-	return pci_irq_table[idsel%4][pin-1];
-}
-
-static int iq80321_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80321 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80321 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80321_preinit(void)
-{
-	iop321_init();
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80321_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq80321_preinit,
-	.map_irq	= iq80321_map_irq
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if (machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c
deleted file mode 100644
index 129eb49b067..00000000000
--- a/arch/arm/mach-iop3xx/iq80331-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80331 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80331 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80331_map_io(void)
-{
-	iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
deleted file mode 100644
index 40d86100249..00000000000
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80331-pci.c
- *
- * PCI support for the Intel IQ80331 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80331_INTA
-#define INTB	IRQ_IQ80331_INTB
-#define INTC	IRQ_IQ80331_INTC
-#define INTD	IRQ_IQ80331_INTD
-
-//#define INTE	IRQ_IQ80331_I82544
-
-static inline int __init
-iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTC, INTD, INTA}, /* PCI-X Slot */
-		{INTC, INTC, INTC, INTC}, /* GigE  */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80331_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80331 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80331 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80331_preinit(void)
-{
-	iop331_init();
-}
-
-static struct hw_pci iq80331_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80331_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80331_preinit,
-	.map_irq	= iq80331_map_irq
-};
-
-static int __init iq80331_pci_init(void)
-{
-	if (machine_is_iq80331())
-		pci_common_init(&iq80331_pci);
-	return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c
deleted file mode 100644
index 2feaf7591f5..00000000000
--- a/arch/arm/mach-iop3xx/iq80332-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80332 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80332 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80332_map_io(void)
-{
-	iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
deleted file mode 100644
index afc0676318e..00000000000
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80332-pci.c
- *
- * PCI support for the Intel IQ80332 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80332_INTA
-#define INTB	IRQ_IQ80332_INTB
-#define INTC	IRQ_IQ80332_INTC
-#define INTD	IRQ_IQ80332_INTD
-
-//#define INTE	IRQ_IQ80332_I82544
-
-static inline int __init
-iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][8] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-		{INTA, INTB, INTC, INTD}, /* PCI-X Slot */
-		{-1,   -1,   -1,   -1},
-		{INTC, INTC, INTC, INTC}, /* GigE  */
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80332_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80332 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80332 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80332_preinit(void)
-{
-	iop331_init();
-}
-
-static struct hw_pci iq80332_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80332_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80332_preinit,
-	.map_irq	= iq80332_map_irq
-};
-
-static int __init iq80332_pci_init(void)
-{
-	if (machine_is_iq80332())
-		pci_common_init(&iq80332_pci);
-	return 0;
-}
-
-subsys_initcall(iq80332_pci_init);
-
-
-
-