Merge branch 'linux-2.6'

1 files changed, 133 insertions, 73 deletions

diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 1b7e4a506c2..85e048b259f 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -39,6 +39,10 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
@@ -48,13 +52,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-struct sys_timer omap_timer;
 
-/*
- * ---------------------------------------------------------------------------
- * MPU timer
- * ---------------------------------------------------------------------------
- */
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -88,21 +86,6 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-/*
- * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
- * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
- * with 0. This divides the 13MHz input by 2, and is undocumented.
- */
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-/* REVISIT: This ifdef construct should be replaced by a query to clock
- * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
- */
-#define MPU_TICKS_PER_SEC		(13000000 / 2)
-#else
-#define MPU_TICKS_PER_SEC		(12000000 / 2)
-#endif
-
-#define MPU_TIMER_TICK_PERIOD		((MPU_TICKS_PER_SEC / HZ) - 1)
 
 typedef struct {
 	u32 cntl;			/* CNTL_TIMER, R/W */
@@ -120,98 +103,164 @@ static inline unsigned long omap_mpu_timer_read(int nr)
 	return timer->read_tim;
 }
 
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
-	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
-	udelay(1);
-	timer->load_tim = load_val;
-        udelay(1);
-	timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+	timer->cntl = timer->cntl | MPU_TIMER_AR;
 }
 
-unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
+static inline void omap_mpu_remove_autoreset(int nr)
 {
-	unsigned long long nsec;
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 
-	nsec = cycles_2_ns((unsigned long long)nr_ticks);
-	return (unsigned long)nsec / 1000;
+	timer->cntl = timer->cntl & ~MPU_TIMER_AR;
 }
 
-/*
- * Last processed system timer interrupt
- */
-static unsigned long omap_mpu_timer_last = 0;
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+	if (autoreset) timerflags |= MPU_TIMER_AR;
+
+	timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+	udelay(1);
+	timer->load_tim = load_val;
+        udelay(1);
+	timer->cntl = timerflags;
+}
 
 /*
- * Returns elapsed usecs since last system timer interrupt
+ * ---------------------------------------------------------------------------
+ * MPU timer 1 ... count down to zero, interrupt, reload
+ * ---------------------------------------------------------------------------
  */
-static unsigned long omap_mpu_timer_gettimeoffset(void)
+static int omap_mpu_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
 {
-	unsigned long now = 0 - omap_mpu_timer_read(0);
-	unsigned long elapsed = now - omap_mpu_timer_last;
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
 
-	return omap_mpu_timer_ticks_to_usecs(elapsed);
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	}
 }
 
-/*
- * Elapsed time between interrupts is calculated using timer0.
- * Latency during the interrupt is calculated using timer1.
- * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
- */
-static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features       = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
-	unsigned long now, latency;
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
 
-	write_seqlock(&xtime_lock);
-	now = 0 - omap_mpu_timer_read(0);
-	latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
-	omap_mpu_timer_last = now - latency;
-	timer_tick();
-	write_sequnlock(&xtime_lock);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer_irq = {
-	.name		= "mpu timer",
+static struct irqaction omap_mpu_timer1_irq = {
+	.name		= "mpu_timer1",
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= omap_mpu_timer_interrupt,
+	.handler	= omap_mpu_timer1_interrupt,
 };
 
-static unsigned long omap_mpu_timer1_overflows;
-static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
+static __init void omap_init_mpu_timer(unsigned long rate)
+{
+	set_cyc2ns_scale(rate / 1000);
+
+	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+					    clockevent_mpu_timer1.shift);
+	clockevent_mpu_timer1.max_delta_ns =
+		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+	clockevent_mpu_timer1.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_mpu_timer1);
+}
+
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 2 ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+
+static unsigned long omap_mpu_timer2_overflows;
+
+static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
 {
-	omap_mpu_timer1_overflows++;
+	omap_mpu_timer2_overflows++;
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu timer1 overflow",
+static struct irqaction omap_mpu_timer2_irq = {
+	.name		= "mpu_timer2",
 	.flags		= IRQF_DISABLED,
-	.handler	= omap_mpu_timer1_interrupt,
+	.handler	= omap_mpu_timer2_interrupt,
 };
 
-static __init void omap_init_mpu_timer(void)
+static cycle_t mpu_read(void)
 {
-	set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
-	omap_timer.offset = omap_mpu_timer_gettimeoffset;
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
-	omap_mpu_timer_start(0, 0xffffffff);
-	omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
+	return ~omap_mpu_timer_read(1);
+}
+
+static struct clocksource clocksource_mpu = {
+	.name		= "mpu_timer2",
+	.rating		= 300,
+	.read		= mpu_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init omap_init_clocksource(unsigned long rate)
+{
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	clocksource_mpu.mult
+		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
+
+	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
+	omap_mpu_timer_start(1, ~0, 1);
+
+	if (clocksource_register(&clocksource_mpu))
+		printk(err, clocksource_mpu.name);
 }
 
+
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
-	unsigned long ticks = 0 - omap_mpu_timer_read(0);
+	unsigned long ticks = 0 - omap_mpu_timer_read(1);
 	unsigned long long ticks64;
 
-	ticks64 = omap_mpu_timer1_overflows;
+	ticks64 = omap_mpu_timer2_overflows;
 	ticks64 <<= 32;
 	ticks64 |= ticks;
 
@@ -225,10 +274,21 @@ unsigned long long sched_clock(void)
  */
 static void __init omap_timer_init(void)
 {
-	omap_init_mpu_timer();
+	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
+	unsigned long	rate;
+
+	BUG_ON(IS_ERR(ck_ref));
+
+	rate = clk_get_rate(ck_ref);
+	clk_put(ck_ref);
+
+	/* PTV = 0 */
+	rate /= 2;
+
+	omap_init_mpu_timer(rate);
+	omap_init_clocksource(rate);
 }
 
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
-	.offset		= NULL,		/* Initialized later */
 };