[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Clock updates by Tuukka Tikkanen, Juha Yrjola,
  Daniel Petrini and Tony Lindgren
- DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini
- Add support to dual-mode hardware timers by Lauri Leukkunen
- GPIO support for 24xx by Paul Mundt
- GPIO wake-up support by Tony Lindgren
- Better GPIO interrupt handler to not lose interrupts by
  Ralph Walden and Ladislav Michl
- Power Management updates by Tuukka Tikkanen
- Make Power Management code use new SRAM functions by
  Tony Lindgren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

16 files changed, 1115 insertions, 307 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 345365852f8..9693e9b4ffd 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
+config OMAP_DM_TIMER
+	bool "Use dual-mode timer"
+	default n
+	depends on ARCH_OMAP16XX
+	help
+	 Select this option if you want to use OMAP Dual-Mode timers.
+
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
@@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3
 
 endchoice
 
+config OMAP_SERIAL_WAKE
+	bool "Enable wake-up events for serial ports"
+	depends OMAP_MUX
+	default y
+	help
+	  Select this option if you want to have your system wake up
+	  to data on the serial RX line. This allows you to wake the
+	  system from serial console.
+
 endmenu
 
 endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 531e11af54d..7e144f9cad1 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
+obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o
 obj-m :=
 obj-n :=
 obj-  :=
@@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 obj-$(CONFIG_PM) += pm.o sleep.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
+obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 59d91b3262b..52a58b2da28 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
 #include <asm/arch/usb.h>
 
 #include "clock.h"
+#include "sram.h"
 
 static LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
@@ -141,7 +142,7 @@ static struct clk arm_ck = {
 static struct clk armper_ck = {
 	.name		= "armper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= ARM_IDLECT2,
 	.enable_bit	= EN_PERCK,
@@ -385,7 +386,8 @@ static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &set_uart_rate,
@@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = {
 	.enable_bit	= 8 /* UHOST_EN */,
 };
 
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.enable_reg	= SOFT_REQ_REG,
+	.enable_bit	= 4,
+};
+
 static struct clk mclk_1510 = {
 	.name		= "mclk",
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
@@ -552,6 +563,7 @@ static struct clk *  onchip_clks[] = {
 	&uart3_16xx,
 	&usb_clko,
 	&usb_hhc_ck1510, &usb_hhc_ck16xx,
+	&usb_dc_ck,
 	&mclk_1510,  &mclk_16xx,
 	&bclk_1510,  &bclk_16xx,
 	&mmc1_ck,
@@ -946,14 +958,13 @@ static int select_table_rate(struct clk *  clk, unsigned long rate)
 	if (!ptr->rate)
 		return -EINVAL;
 
-	if (!ptr->rate)
-		return -EINVAL;
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
-	if (unlikely(ck_dpll1.rate == 0)) {
-		omap_writew(ptr->dpllctl_val, DPLL_CTL);
-		ck_dpll1.rate = ptr->pll_rate;
-	}
-	omap_writew(ptr->ckctl_val, ARM_CKCTL);
+	ck_dpll1.rate = ptr->pll_rate;
 	propagate_rate(&ck_dpll1);
 	return 0;
 }
@@ -1224,9 +1235,11 @@ int __init clk_init(void)
 #endif
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n",
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
 	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate, arm_ck.rate);
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 
 #ifdef CONFIG_MACH_OMAP_PERSEUS2
 	/* Select slicer output as OMAP input clock */
@@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void)
 	struct clk *p;
 	__u32 regval32;
 
-	omap_writew(0, SOFT_REQ_REG);
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(regval32, SOFT_REQ_REG);
 	omap_writew(0, SOFT_REQ_REG2);
 
 	list_for_each_entry(p, &clocks, node) {
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ea967a8f6ce..6cb20aea7f5 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -26,6 +26,7 @@
 #include <asm/hardware/clock.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/setup.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>
@@ -35,11 +36,11 @@
 
 #define NO_LENGTH_CHECK 0xffffffff
 
-extern int omap_bootloader_tag_len;
-extern u8 omap_bootloader_tag[];
+unsigned char omap_bootloader_tag[512];
+int omap_bootloader_tag_len;
 
 struct omap_board_config_kernel *omap_board_config;
-int omap_board_config_size = 0;
+int omap_board_config_size;
 
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c0a5c2fa42b..da7b6514565 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -425,7 +425,7 @@ static int dma_handle_ch(int ch)
 		dma_chan[ch + 6].saved_csr = csr >> 7;
 		csr &= 0x7f;
 	}
-	if (!csr)
+	if ((csr & 0x3f) == 0)
 		return 0;
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
 		printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
@@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void)
 	w |= 1 << 8;
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 
+	lcd_dma.active = 1;
+
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);
 	w |= 1 << 7;
 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	lcd_dma.active = 1;
 }
 
 void omap_setup_lcd_dma(void)
@@ -965,8 +965,8 @@ void omap_clear_dma(int lch)
  */
 dma_addr_t omap_get_dma_src_pos(int lch)
 {
-	return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) |
-			     (OMAP_DMA_CSSA_U(lch) << 16));
+	return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) |
+	(omap_readw(OMAP_DMA_CSSA_U(lch)) << 16));
 }
 
 /*
@@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch)
  */
 dma_addr_t omap_get_dma_dst_pos(int lch)
 {
-	return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) |
-			     (OMAP_DMA_CDSA_U(lch) << 16));
+	return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) |
+	(omap_readw(OMAP_DMA_CDSA_U(lch)) << 16));
+}
+
+/*
+ * Returns current source transfer counting for the given DMA channel.
+ * Can be used to monitor the progress of a transfer inside a  block.
+ * It must be called with disabled interrupts.
+ */
+int omap_get_dma_src_addr_counter(int lch)
+{
+	return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch));
 }
 
 int omap_dma_running(void)
@@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma);
 
 EXPORT_SYMBOL(omap_get_dma_src_pos);
 EXPORT_SYMBOL(omap_get_dma_dst_pos);
+EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
 EXPORT_SYMBOL(omap_clear_dma);
 EXPORT_SYMBOL(omap_set_dma_priority);
 EXPORT_SYMBOL(omap_request_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
new file mode 100644
index 00000000000..a1468d7326e
--- /dev/null
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/plat-omap/dmtimer.c
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/dmtimer.h>
+#include <asm/io.h>
+#include <asm/arch/irqs.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#define OMAP_TIMER_COUNT		8
+
+#define OMAP_TIMER_ID_REG		0x00
+#define OMAP_TIMER_OCP_CFG_REG		0x10
+#define OMAP_TIMER_SYS_STAT_REG		0x14
+#define OMAP_TIMER_STAT_REG		0x18
+#define OMAP_TIMER_INT_EN_REG		0x1c
+#define OMAP_TIMER_WAKEUP_EN_REG	0x20
+#define OMAP_TIMER_CTRL_REG		0x24
+#define OMAP_TIMER_COUNTER_REG		0x28
+#define OMAP_TIMER_LOAD_REG		0x2c
+#define OMAP_TIMER_TRIGGER_REG		0x30
+#define OMAP_TIMER_WRITE_PEND_REG 	0x34
+#define OMAP_TIMER_MATCH_REG		0x38
+#define OMAP_TIMER_CAPTURE_REG		0x3c
+#define OMAP_TIMER_IF_CTRL_REG		0x40
+
+
+static struct dmtimer_info_struct {
+	struct list_head	unused_timers;
+	struct list_head	reserved_timers;
+} dm_timer_info;
+
+static struct omap_dm_timer dm_timers[] = {
+	{ .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
+	{ .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
+	{ .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
+	{ .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
+	{ .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
+	{ .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
+	{ .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
+	{ .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
+	{ .base=0x0 },
+};
+
+
+static spinlock_t dm_timer_lock;
+
+
+inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+{
+	omap_writel(value, timer->base + reg);
+	while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
+		;
+}
+
+u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+{
+	return omap_readl(timer->base + reg);
+}
+
+int omap_dm_timers_active(void)
+{
+	struct omap_dm_timer *timer;
+
+	for (timer = &dm_timers[0]; timer->base; ++timer)
+		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+		    OMAP_TIMER_CTRL_ST)
+			return 1;
+
+	return 0;
+}
+
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+{
+	int n = (timer - dm_timers) << 1;
+	u32 l;
+
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	omap_writel(l, MOD_CONF_CTRL_1);
+}
+
+
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+	/* Reset and set posted mode */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
+
+	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+}
+
+
+
+struct omap_dm_timer * omap_dm_timer_request(void)
+{
+	struct omap_dm_timer *timer = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	if (!list_empty(&dm_timer_info.unused_timers)) {
+		timer = (struct omap_dm_timer *)
+				dm_timer_info.unused_timers.next;
+		list_move_tail((struct list_head *)timer,
+				&dm_timer_info.reserved_timers);
+	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	return timer;
+}
+
+
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+	unsigned long flags;
+
+	omap_dm_timer_reset(timer);
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+}
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+				unsigned int value)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
+}
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+{
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+}
+
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+}
+
+void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
+{
+	u32 l;
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_AR;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
+}
+
+void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= value & 0x3;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_ST;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l &= ~0x1;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+{
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+}
+
+void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+}
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+}
+
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+}
+
+void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_CE;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+
+static inline void __dm_timer_init(void)
+{
+	struct omap_dm_timer *timer;
+
+	spin_lock_init(&dm_timer_lock);
+	INIT_LIST_HEAD(&dm_timer_info.unused_timers);
+	INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
+
+	timer = &dm_timers[0];
+	while (timer->base) {
+		list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
+		omap_dm_timer_reset(timer);
+		timer++;
+	}
+}
+
+static int __init omap_dm_timer_init(void)
+{
+	if (cpu_is_omap16xx())
+		__dm_timer_init();
+	return 0;
+}
+
+arch_initcall(omap_dm_timer_init);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index aa481ea3d70..55059a24ad4 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -3,7 +3,7 @@
  *
  * Support functions for OMAP GPIO
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,8 +17,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/err.h>
 
 #include <asm/hardware.h>
+#include <asm/hardware/clock.h>
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>
@@ -29,7 +32,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		0xfffce000
+#define OMAP1510_GPIO_BASE		(void __iomem *)0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -43,34 +46,37 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		0xfffbe400
-#define OMAP1610_GPIO2_BASE		0xfffbec00
-#define OMAP1610_GPIO3_BASE		0xfffbb400
-#define OMAP1610_GPIO4_BASE		0xfffbbc00
+#define OMAP1610_GPIO1_BASE		(void __iomem *)0xfffbe400
+#define OMAP1610_GPIO2_BASE		(void __iomem *)0xfffbec00
+#define OMAP1610_GPIO3_BASE		(void __iomem *)0xfffbb400
+#define OMAP1610_GPIO4_BASE		(void __iomem *)0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
 #define OMAP1610_GPIO_IRQSTATUS1	0x0018
 #define OMAP1610_GPIO_IRQENABLE1	0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
 #define OMAP1610_GPIO_DATAIN		0x002c
 #define OMAP1610_GPIO_DATAOUT		0x0030
 #define OMAP1610_GPIO_DIRECTION		0x0034
 #define OMAP1610_GPIO_EDGE_CTRL1	0x0038
 #define OMAP1610_GPIO_EDGE_CTRL2	0x003c
 #define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
 #define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
 #define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		0xfffbc000
-#define OMAP730_GPIO2_BASE		0xfffbc800
-#define OMAP730_GPIO3_BASE		0xfffbd000
-#define OMAP730_GPIO4_BASE		0xfffbd800
-#define OMAP730_GPIO5_BASE		0xfffbe000
-#define OMAP730_GPIO6_BASE		0xfffbe800
+#define OMAP730_GPIO1_BASE		(void __iomem *)0xfffbc000
+#define OMAP730_GPIO2_BASE		(void __iomem *)0xfffbc800
+#define OMAP730_GPIO3_BASE		(void __iomem *)0xfffbd000
+#define OMAP730_GPIO4_BASE		(void __iomem *)0xfffbd800
+#define OMAP730_GPIO5_BASE		(void __iomem *)0xfffbe000
+#define OMAP730_GPIO6_BASE		(void __iomem *)0xfffbe800
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -78,14 +84,43 @@
 #define OMAP730_GPIO_INT_MASK		0x10
 #define OMAP730_GPIO_INT_STATUS		0x14
 
+/*
+ * omap24xx specific GPIO registers
+ */
+#define OMAP24XX_GPIO1_BASE		(void __iomem *)0x48018000
+#define OMAP24XX_GPIO2_BASE		(void __iomem *)0x4801a000
+#define OMAP24XX_GPIO3_BASE		(void __iomem *)0x4801c000
+#define OMAP24XX_GPIO4_BASE		(void __iomem *)0x4801e000
+#define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_SYSCONFIG		0x0010
+#define OMAP24XX_GPIO_SYSSTATUS		0x0014
+#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
+#define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_CTRL		0x0030
+#define OMAP24XX_GPIO_OE		0x0034
+#define OMAP24XX_GPIO_DATAIN		0x0038
+#define OMAP24XX_GPIO_DATAOUT		0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
+#define OMAP24XX_GPIO_RISINGDETECT	0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
+#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
+#define OMAP24XX_GPIO_SETWKUENA		0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
+#define OMAP24XX_GPIO_SETDATAOUT	0x0094
+
 #define OMAP_MPUIO_MASK		(~OMAP_MAX_GPIO_LINES & 0xff)
 
 struct gpio_bank {
-	u32 base;
+	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
-	u8 method;
+	int method;
 	u32 reserved_map;
+	u32 suspend_wakeup;
+	u32 saved_wakeup;
 	spinlock_t lock;
 };
 
@@ -93,8 +128,9 @@ struct gpio_bank {
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
+#define METHOD_GPIO_24XX	4
 
-#if defined(CONFIG_ARCH_OMAP16XX)
+#ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
 	{ OMAP_MPUIO_BASE,     INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
@@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct gpio_bank gpio_bank_24xx[4] = {
+	{ OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+};
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 		return &gpio_bank[1 + (gpio >> 5)];
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx())
+		return &gpio_bank[gpio >> 5];
+#endif
 }
 
 static inline int get_gpio_index(int gpio)
 {
+#ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730())
 		return gpio & 0x1f;
-	else
-		return gpio & 0x0f;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx())
+		return gpio & 0x1f;
+#endif
+	return gpio & 0x0f;
 }
 
 static inline int gpio_valid(int gpio)
@@ -180,6 +234,10 @@ static inline int gpio_valid(int gpio)
 	if (cpu_is_omap730() && gpio < 192)
 		return 0;
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx() && gpio < 128)
+		return 0;
+#endif
 	return -1;
 }
 
@@ -195,7 +253,7 @@ static int check_gpio(int gpio)
 
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l;
 
 	switch (bank->method) {
@@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
 	}
 	l = __raw_readl(reg);
 	if (is_input)
@@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input)
 
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l = 0;
 
 	switch (bank->method) {
@@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		else
 			l &= ~(1 << gpio);
 		break;
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETDATAOUT;
+		else
+			reg += OMAP24XX_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 	default:
 		BUG();
 		return;
@@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable)
 int omap_get_gpio_datain(int gpio)
 {
 	struct gpio_bank *bank;
-	u32 reg;
+	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -1;
@@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DATA_INPUT;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAIN;
+		break;
 	default:
 		BUG();
 		return -1;
 	}
-	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+	return (__raw_readl(reg)
+			& (1 << get_gpio_index(gpio))) != 0;
 }
 
-static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge)
+#define MOD_REG_BIT(reg, bit_mask, set)	\
+do {	\
+	int l = __raw_readl(base + reg); \
+	if (set) l |= bit_mask; \
+	else l &= ~bit_mask; \
+	__raw_writel(l, base + reg); \
+} while(0)
+
+static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger)
 {
-	u32 reg = bank->base;
-	u32 l;
+	u32 gpio_bit = 1 << gpio;
+
+	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+		trigger & IRQT_LOW);
+	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+		trigger & IRQT_HIGH);
+	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+		trigger & IRQT_RISING);
+	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+		trigger & IRQT_FALLING);
+	/* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level
+	 * triggering requested. */
+}
+
+static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
 		break;
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
 		break;
 	case METHOD_GPIO_1610:
-		edge &= 0x03;
 		if (gpio & 0x08)
 			reg += OMAP1610_GPIO_EDGE_CTRL2;
 		else
 			reg += OMAP1610_GPIO_EDGE_CTRL1;
 		gpio &= 0x07;
+		/* We allow only edge triggering, i.e. two lowest bits */
+		if (trigger & ~IRQT_BOTHEDGE)
+			BUG();
+		/* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */
+		trigger &= 0x03;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		l |= edge << (gpio << 1);
-		__raw_writel(l, reg);
+		l |= trigger << (gpio << 1);
 		break;
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
+		break;
+	case METHOD_GPIO_24XX:
+		set_24xx_gpio_triggering(reg, gpio, trigger);
 		break;
 	default:
 		BUG();
-		return;
+		goto bad;
 	}
+	__raw_writel(l, reg);
+	return 0;
+bad:
+	return -EINVAL;
 }
 
-void omap_set_gpio_edge_ctrl(int gpio, int edge)
+static int gpio_irq_type(unsigned irq, unsigned type)
 {
 	struct gpio_bank *bank;
+	unsigned gpio;
+	int retval;
+
+	if (irq > IH_MPUIO_BASE)
+		gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
+	else
+		gpio = irq - IH_GPIO_BASE;
 
 	if (check_gpio(gpio) < 0)
-		return;
+		return -EINVAL;
+
+	if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE))
+		return -EINVAL;
+
 	bank = get_gpio_bank(gpio);
 	spin_lock(&bank->lock);
-	_set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge);
+	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
 	spin_unlock(&bank->lock);
-}
-
-
-static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio)
-{
-	u32 reg = bank->base, l;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	case METHOD_GPIO_1510:
-		l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	case METHOD_GPIO_1610:
-		if (gpio & 0x08)
-			reg += OMAP1610_GPIO_EDGE_CTRL2;
-		else
-			reg += OMAP1610_GPIO_EDGE_CTRL1;
-		return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03;
-	case METHOD_GPIO_730:
-		l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	default:
-		BUG();
-		return -1;
-	}
+	return retval;
 }
 
 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
@@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_STATUS;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQSTATUS1;
+		break;
 	default:
 		BUG();
 		return;
@@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 
 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l;
 
 	switch (bank->method) {
@@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		else
 			l |= gpio_mask;
 		break;
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETIRQENABLE1;
+		else
+			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
+		l = gpio_mask;
+		break;
 	default:
 		BUG();
 		return;
@@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
 	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
 }
 
+/*
+ * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
+ * 1510 does not seem to have a wake-up register. If JTAG is connected
+ * to the target, system will wake up always on GPIO events. While
+ * system is running all registered GPIO interrupts need to have wake-up
+ * enabled. When system is suspended, only selected GPIO interrupts need
+ * to have wake-up enabled.
+ */
+static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+{
+	switch (bank->method) {
+	case METHOD_GPIO_1610:
+	case METHOD_GPIO_24XX:
+		spin_lock(&bank->lock);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock(&bank->lock);
+		return 0;
+	default:
+		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
+		       bank->method);
+		return -EINVAL;
+	}
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int gpio_wake_enable(unsigned int irq, unsigned int enable)
+{
+	unsigned int gpio = irq - IH_GPIO_BASE;
+	struct gpio_bank *bank;
+	int retval;
+
+	if (check_gpio(gpio) < 0)
+		return -ENODEV;
+	bank = get_gpio_bank(gpio);
+	spin_lock(&bank->lock);
+	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+	spin_unlock(&bank->lock);
+
+	return retval;
+}
+
 int omap_request_gpio(int gpio)
 {
 	struct gpio_bank *bank;
@@ -505,15 +650,33 @@ int omap_request_gpio(int gpio)
 		return -1;
 	}
 	bank->reserved_map |= (1 << get_gpio_index(gpio));
+
+	/* Set trigger to none. You need to enable the trigger after request_irq */
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+
 #ifdef CONFIG_ARCH_OMAP1510
 	if (bank->method == METHOD_GPIO_1510) {
-		u32 reg;
+		void __iomem *reg;
 
-		/* Claim the pin for the ARM */
+		/* Claim the pin for MPU */
 		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
 		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Enable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Enable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
 	spin_unlock(&bank->lock);
 
 	return 0;
@@ -533,6 +696,20 @@ void omap_free_gpio(int gpio)
 		spin_unlock(&bank->lock);
 		return;
 	}
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
 	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
@@ -552,7 +729,7 @@ void omap_free_gpio(int gpio)
 static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 			     struct pt_regs *regs)
 {
-	u32 isr_reg = 0;
+	void __iomem *isr_reg = NULL;
 	u32 isr;
 	unsigned int gpio_irq;
 	struct gpio_bank *bank;
@@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	if (bank->method == METHOD_GPIO_730)
 		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
 
-	isr = __raw_readl(isr_reg);
-	_enable_gpio_irqbank(bank, isr, 0);
-	_clear_gpio_irqbank(bank, isr);
-	_enable_gpio_irqbank(bank, isr, 1);
-	desc->chip->unmask(irq);
-
-	if (unlikely(!isr))
-		return;
-
-	gpio_irq = bank->virtual_irq_start;
-	for (; isr != 0; isr >>= 1, gpio_irq++) {
-		struct irqdesc *d;
-		if (!(isr & 1))
-			continue;
-		d = irq_desc + gpio_irq;
-		desc_handle_irq(gpio_irq, d, regs);
-	}
+	while(1) {
+		isr = __raw_readl(isr_reg);
+		_enable_gpio_irqbank(bank, isr, 0);
+		_clear_gpio_irqbank(bank, isr);
+		_enable_gpio_irqbank(bank, isr, 1);
+		desc->chip->unmask(irq);
+
+		if (!isr)
+			break;
+
+		gpio_irq = bank->virtual_irq_start;
+		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			struct irqdesc *d;
+			if (!(isr & 1))
+				continue;
+			d = irq_desc + gpio_irq;
+			desc_handle_irq(gpio_irq, d, regs);
+		}
+        }
 }
 
 static void gpio_ack_irq(unsigned int irq)
@@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq)
 static void gpio_unmask_irq(unsigned int irq)
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
+	unsigned int gpio_idx = get_gpio_index(gpio);
 	struct gpio_bank *bank = get_gpio_bank(gpio);
 
-	if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) {
-		printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n",
-		       gpio);
-		_set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE);
-	}
-	_set_gpio_irqenable(bank, gpio, 1);
+	_set_gpio_irqenable(bank, gpio_idx, 1);
 }
 
 static void mpuio_ack_irq(unsigned int irq)
@@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq)
 }
 
 static struct irqchip gpio_irq_chip = {
-	.ack	= gpio_ack_irq,
-	.mask	= gpio_mask_irq,
-	.unmask = gpio_unmask_irq,
+	.ack		= gpio_ack_irq,
+	.mask		= gpio_mask_irq,
+	.unmask		= gpio_unmask_irq,
+	.set_type	= gpio_irq_type,
+	.set_wake	= gpio_wake_enable,
 };
 
 static struct irqchip mpuio_irq_chip = {
@@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = {
 };
 
 static int initialized = 0;
+static struct clk * gpio_ck = NULL;
 
 static int __init _omap_gpio_init(void)
 {
@@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void)
 
 	initialized = 1;
 
+	if (cpu_is_omap1510()) {
+		gpio_ck = clk_get(NULL, "arm_gpio_ck");
+		if (IS_ERR(gpio_ck))
+			printk("Could not get arm_gpio_ck\n");
+		else
+			clk_use(gpio_ck);
+	}
+
 #ifdef CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
 		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
@@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void)
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		int rev;
+		u32 rev;
 
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
@@ -690,6 +880,17 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_730;
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx()) {
+		int rev;
+
+		gpio_bank_count = 4;
+		gpio_bank = gpio_bank_24xx;
+		rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void)
 		if (bank->method == METHOD_GPIO_1610) {
 			__raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
 #endif
 #ifdef CONFIG_ARCH_OMAP730
@@ -720,6 +922,14 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+		if (bank->method == METHOD_GPIO_24XX) {
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
+			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
+
+			gpio_count = 32;
+		}
+#endif
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
 			if (bank->method == METHOD_MPUIO)
@@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void)
 
 	/* Enable system clock for GPIO module.
 	 * The CAM_CLK_CTRL *is* really the right place. */
-	if (cpu_is_omap1610() || cpu_is_omap1710())
+	if (cpu_is_omap16xx())
 		omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
 
 	return 0;
 }
 
+#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX)
+static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
+{
+	int i;
+
+	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_status;
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+
+		switch (bank->method) {
+		case METHOD_GPIO_1610:
+			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+		default:
+			continue;
+		}
+
+		spin_lock(&bank->lock);
+		bank->saved_wakeup = __raw_readl(wake_status);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->suspend_wakeup, wake_set);
+		spin_unlock(&bank->lock);
+	}
+
+	return 0;
+}
+
+static int omap_gpio_resume(struct sys_device *dev)
+{
+	int i;
+
+	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+
+		switch (bank->method) {
+		case METHOD_GPIO_1610:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		default:
+			continue;
+		}
+
+		spin_lock(&bank->lock);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->saved_wakeup, wake_set);
+		spin_unlock(&bank->lock);
+	}
+
+	return 0;
+}
+
+static struct sysdev_class omap_gpio_sysclass = {
+	set_kset_name("gpio"),
+	.suspend	= omap_gpio_suspend,
+	.resume		= omap_gpio_resume,
+};
+
+static struct sys_device omap_gpio_device = {
+	.id		= 0,
+	.cls		= &omap_gpio_sysclass,
+};
+#endif
+
 /*
  * This may get called early from board specific init
  */
@@ -752,11 +1047,30 @@ int omap_gpio_init(void)
 		return 0;
 }
 
+static int __init omap_gpio_sysinit(void)
+{
+	int ret = 0;
+
+	if (!initialized)
+		ret = _omap_gpio_init();
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX)
+	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+		if (ret == 0) {
+			ret = sysdev_class_register(&omap_gpio_sysclass);
+			if (ret == 0)
+				ret = sysdev_register(&omap_gpio_device);
+		}
+	}
+#endif
+
+	return ret;
+}
+
 EXPORT_SYMBOL(omap_request_gpio);
 EXPORT_SYMBOL(omap_free_gpio);
 EXPORT_SYMBOL(omap_set_gpio_direction);
 EXPORT_SYMBOL(omap_set_gpio_dataout);
 EXPORT_SYMBOL(omap_get_gpio_datain);
-EXPORT_SYMBOL(omap_set_gpio_edge_ctrl);
 
-arch_initcall(omap_gpio_init);
+arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 43567d5eddd..9c9b7df3faf 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,6 +27,7 @@
 #include <asm/arch/dma.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/irqs.h>
+#include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
 #include <asm/hardware/clock.h>
@@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id)
 	return -1;
 }
 
-#define EN_XORPCK		1
-#define DSP_RSTCT2              0xe1008014
-
 static void omap_mcbsp_dsp_request(void)
 {
 	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
@@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void)
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
 		clk_use(mcbsp_dspxor_ck);
+
+		/*
+		 * DSP external peripheral reset
+		 * FIXME: This should be moved to dsp code
+		 */
 		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
 			     DSP_RSTCT2);
 	}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index ea7b955b9c8..64482040f89 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		pull_orig = 0, pull = 0;
 	unsigned int mask, warn = 0;
 
+	if (cpu_is_omap7xx())
+		return 0;
+
 	if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
 		printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
 		return -EINVAL;
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 2ede2ee8cae..1fb16f9edfd 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -25,6 +25,7 @@
 
 #include <linux/config.h>
 #include <linux/module.h>
+#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
index e6536b16c38..e15c6c1ddec 100644
--- a/arch/arm/plat-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -39,24 +39,32 @@
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <linux/pm.h>
+#include <linux/interrupt.h>
 
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/mach/time.h>
-#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
 
-#include <asm/arch/omap16xx.h>
+#include <asm/mach-types.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/tc.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
 #include <asm/arch/tps65010.h>
+#include <asm/arch/dsp_common.h>
 
 #include "clock.h"
+#include "sram.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
+static void (*omap_sram_idle)(void) = NULL;
+static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
+
 /*
  * Let's power down on idle, but only if we are really
  * idle, because once we start down the path of
@@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
  */
 void omap_pm_idle(void)
 {
-	int (*func_ptr)(void) = 0;
 	unsigned int mask32 = 0;
 
 	/*
@@ -84,6 +91,13 @@ void omap_pm_idle(void)
 	mask32 = omap_readl(ARM_SYSST);
 
 	/*
+	 * Prevent the ULPD from entering low power state by setting
+	 * POWER_CTRL_REG:4 = 0
+	 */
+	omap_writew(omap_readw(ULPD_POWER_CTRL) &
+		    ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
+
+	/*
 	 * Since an interrupt may set up a timer, we don't want to
 	 * reprogram the hardware timer with interrupts enabled.
 	 * Re-enable interrupts only after returning from idle.
@@ -92,18 +106,9 @@ void omap_pm_idle(void)
 
 	if ((mask32 & DSP_IDLE) == 0) {
 		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
-	} else {
-
-		if (cpu_is_omap1510()) {
-			func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND);
-		} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
-			func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND);
-		} else if (cpu_is_omap5912()) {
-			func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND);
-		}
+	} else
+		omap_sram_idle();
 
-		func_ptr();
-	}
 	local_fiq_enable();
 	local_irq_enable();
 }
@@ -115,58 +120,55 @@ void omap_pm_idle(void)
  */
 static void omap_pm_wakeup_setup(void)
 {
-	/*
-	 * Enable ARM XOR clock and release peripheral from reset by
-	 * writing 1 to PER_EN bit in ARM_RSTCT2, this is required
-	 * for UART configuration to use UART2 to wake up.
-	 */
-
-	omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2);
-	omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2);
-	omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL);
+	u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ);
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD);
 
 	/*
-	 * Turn off all interrupts except L1-2nd level cascade,
-	 * and the L2 wakeup interrupts: keypad and UART2.
+	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
+	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
+	 * drivers must still separately call omap_set_gpio_wakeup() to
+	 * wake up to a GPIO interrupt.
 	 */
+	if (cpu_is_omap1510() || cpu_is_omap16xx())
+		level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1);
+	else if (cpu_is_omap730())
+		level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1);
 
-	omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR);
+	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap1510()) {
-		omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD),  OMAP_IH2_MIR);
-	}
+	if (cpu_is_omap1510())
+		omap_writel(~level2_wake,  OMAP_IH2_MIR);
 
+	/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
 	if (cpu_is_omap16xx()) {
-		omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR);
-
-		omap_writel(~0x0, OMAP_IH2_1_MIR);
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
 		omap_writel(~0x0, OMAP_IH2_2_MIR);
 		omap_writel(~0x0, OMAP_IH2_3_MIR);
 	}
 
-	/*  New IRQ agreement */
+	/*  New IRQ agreement, recalculate in cascade order */
+	omap_writel(1, OMAP_IH2_CONTROL);
  	omap_writel(1, OMAP_IH1_CONTROL);
-
-	/* external PULL to down, bit 22 = 0 */
-	omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2);
 }
 
 void omap_pm_suspend(void)
 {
-	unsigned int mask32 = 0;
 	unsigned long arg0 = 0, arg1 = 0;
-	int (*func_ptr)(unsigned short, unsigned short) = 0;
-	unsigned short save_dsp_idlect2;
 
-	printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev);
+	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+
+	omap_serial_wake_trigger(1);
 
 	if (machine_is_omap_osk()) {
 		/* Stop LED1 (D9) blink */
 		tps65010_set_led(LED1, OFF);
 	}
 
+	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+
 	/*
-	 * Step 1: turn off interrupts
+	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
 	 */
 
 	local_irq_disable();
@@ -207,6 +209,8 @@ void omap_pm_suspend(void)
 	ARM_SAVE(ARM_CKCTL);
 	ARM_SAVE(ARM_IDLECT1);
 	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap1510()))
+		ARM_SAVE(ARM_IDLECT3);
 	ARM_SAVE(ARM_EWUPCT);
 	ARM_SAVE(ARM_RSTCT1);
 	ARM_SAVE(ARM_RSTCT2);
@@ -214,42 +218,12 @@ void omap_pm_suspend(void)
 	ULPD_SAVE(ULPD_CLOCK_CTRL);
 	ULPD_SAVE(ULPD_STATUS_REQ);
 
-	/*
-	 * Step 3: LOW_PWR signal enabling
-	 *
-	 * Allow the LOW_PWR signal to be visible on MPUIO5 ball.
-	 */
-	if (cpu_is_omap1510()) {
-		/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) |
-			    OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	} else if (cpu_is_omap16xx()) {
-		/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) |
-			    OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	}
-
-	/* configure LOW_PWR pin */
-	omap_cfg_reg(T20_1610_LOW_PWR);
+	/* (Step 3 removed - we now allow deep sleep by default) */
 
 	/*
 	 * Step 4: OMAP DSP Shutdown
 	 */
 
-	/* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */
-	omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE,
-		    ARM_RSTCT1);
-
-	/* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */
-        omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG);
-
-	/* Set EN_DSPCK = 0, stop DSP block clock */
-	omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL);
-
-	/* Stop any DSP domain clocks */
-	omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
-	save_dsp_idlect2 = __raw_readw(DSP_IDLECT2);
-	__raw_writew(0, DSP_IDLECT2);
 
 	/*
 	 * Step 5: Wakeup Event Setup
@@ -258,24 +232,9 @@ void omap_pm_suspend(void)
 	omap_pm_wakeup_setup();
 
 	/*
-	 * Step 6a: ARM and Traffic controller shutdown
-	 *
-	 * Step 6 starts here with clock and watchdog disable
+	 * Step 6: ARM and Traffic controller shutdown
 	 */
 
-	/* stop clocks */
-	mask32 = omap_readl(ARM_IDLECT2);
-	mask32 &= ~(1<<EN_WDTCK);  /* bit 0 -> 0 (WDT clock) */
-	mask32 |=  (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */
-	mask32 &= ~(1<<EN_PERCK);  /* bit 2 -> 0 (MPUPER_CK clock) */
-	mask32 &= ~(1<<EN_LCDCK);  /* bit 3 -> 0 (LCDC clock) */
-	mask32 &= ~(1<<EN_LBCK);   /* bit 4 -> 0 (local bus clock) */
-	mask32 |=  (1<<EN_APICK);  /* bit 6 -> 1 (MPUI clock) */
-	mask32 &= ~(1<<EN_TIMCK);  /* bit 7 -> 0 (MPU timer clock) */
-	mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */
-	mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */
-	omap_writel(mask32, ARM_IDLECT2);
-
 	/* disable ARM watchdog */
 	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
 	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
@@ -295,47 +254,24 @@ void omap_pm_suspend(void)
 	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
 	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
 
-	if (cpu_is_omap1510()) {
-		func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND);
-	} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND);
-	} else if (cpu_is_omap5912()) {
-		func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND);
-	}
-
 	/*
 	 * Step 6c: ARM and Traffic controller shutdown
 	 *
 	 * Jump to assembly code. The processor will stay there
  	 * until wake up.
 	 */
-
-        func_ptr(arg0, arg1);
+        omap_sram_suspend(arg0, arg1);
 
 	/*
 	 * If we are here, processor is woken up!
 	 */
 
-	if (cpu_is_omap1510()) {
-		/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) &
-			    ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	} else if (cpu_is_omap16xx()) {
-		/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) &
-			    ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	}
-
-
-	/* Restore DSP clocks */
-	omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
-	__raw_writew(save_dsp_idlect2, DSP_IDLECT2);
-	ARM_RESTORE(ARM_IDLECT2);
-
 	/*
 	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
 	 */
 
+	if (!(cpu_is_omap1510()))
+		ARM_RESTORE(ARM_IDLECT3);
 	ARM_RESTORE(ARM_CKCTL);
 	ARM_RESTORE(ARM_EWUPCT);
 	ARM_RESTORE(ARM_RSTCT1);
@@ -366,6 +302,8 @@ void omap_pm_suspend(void)
 		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 	}
 
+	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+
 	/*
 	 * Reenable interrupts
 	 */
@@ -373,6 +311,8 @@ void omap_pm_suspend(void)
 	local_irq_enable();
 	local_fiq_enable();
 
+	omap_serial_wake_trigger(0);
+
 	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
 
 	if (machine_is_omap_osk()) {
@@ -401,6 +341,8 @@ static int omap_pm_read_proc(
 	ARM_SAVE(ARM_CKCTL);
 	ARM_SAVE(ARM_IDLECT1);
 	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap1510()))
+		ARM_SAVE(ARM_IDLECT3);
 	ARM_SAVE(ARM_EWUPCT);
 	ARM_SAVE(ARM_RSTCT1);
 	ARM_SAVE(ARM_RSTCT2);
@@ -436,6 +378,7 @@ static int omap_pm_read_proc(
 		   "ARM_CKCTL_REG:            0x%-8x     \n"
 		   "ARM_IDLECT1_REG:          0x%-8x     \n"
 		   "ARM_IDLECT2_REG:          0x%-8x     \n"
+		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
 		   "ARM_EWUPCT_REG:           0x%-8x     \n"
 		   "ARM_RSTCT1_REG:           0x%-8x     \n"
 		   "ARM_RSTCT2_REG:           0x%-8x     \n"
@@ -449,6 +392,7 @@ static int omap_pm_read_proc(
 		   ARM_SHOW(ARM_CKCTL),
 		   ARM_SHOW(ARM_IDLECT1),
 		   ARM_SHOW(ARM_IDLECT2),
+		   ARM_SHOW(ARM_IDLECT3),
 		   ARM_SHOW(ARM_EWUPCT),
 		   ARM_SHOW(ARM_RSTCT1),
 		   ARM_SHOW(ARM_RSTCT2),
@@ -507,7 +451,7 @@ static void omap_pm_init_proc(void)
 
 	entry = create_proc_read_entry("driver/omap_pm",
 				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, 0);
+	   omap_pm_read_proc, NULL);
 }
 
 #endif /* DEBUG && CONFIG_PROC_FS */
@@ -580,7 +524,21 @@ static int omap_pm_finish(suspend_state_t state)
 }
 
 
-struct pm_ops omap_pm_ops ={
+static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
+				     struct pt_regs *  regs)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_wakeup_irq = {
+	.name		= "peripheral wakeup",
+	.flags		= SA_INTERRUPT,
+	.handler	= omap_wakeup_interrupt
+};
+
+
+
+static struct pm_ops omap_pm_ops ={
 	.pm_disk_mode = 0,
         .prepare        = omap_pm_prepare,
         .enter          = omap_pm_enter,
@@ -590,42 +548,61 @@ struct pm_ops omap_pm_ops ={
 static int __init omap_pm_init(void)
 {
 	printk("Power Management for TI OMAP.\n");
-	pm_idle = omap_pm_idle;
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-
-#ifdef	CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
-		memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND,
-		       omap1510_idle_loop_suspend,
-		       omap1510_idle_loop_suspend_sz);
-		memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend,
-		       omap1510_cpu_suspend_sz);
-	} else
-#endif
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND,
-		       omap1610_idle_loop_suspend,
-		       omap1610_idle_loop_suspend_sz);
-		memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend,
-		       omap1610_cpu_suspend_sz);
-	} else if (cpu_is_omap5912()) {
-		memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND,
-		       omap1610_idle_loop_suspend,
-		       omap1610_idle_loop_suspend_sz);
-		memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend,
-		       omap1610_cpu_suspend_sz);
+		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
+						omap1510_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+						   omap1510_cpu_suspend_sz);
+	} else if (cpu_is_omap16xx()) {
+		omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
+						omap1610_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
+						   omap1610_cpu_suspend_sz);
 	}
 
+	if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
+		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
+		return -ENODEV;
+	}
+
+	pm_idle = omap_pm_idle;
+
+	setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+#if 0
+	/* --- BEGIN BOARD-DEPENDENT CODE --- */
+	/* Sleepx mask direction */
+	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+	/* Unmask sleepx signal */
+	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+	/* --- END BOARD-DEPENDENT CODE --- */
+#endif
+
+	/* Program new power ramp-up time
+	 * (0 for most boards since we don't lower voltage when in deep sleep)
+	 */
+	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
+
+	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
+	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+	/* Configure IDLECT3 */
+	if (cpu_is_omap16xx())
+		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
 	pm_set_ops(&omap_pm_ops);
 
 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 	omap_pm_init_proc();
 #endif
 
+	/* configure LOW_PWR pin */
+	omap_cfg_reg(T20_1610_LOW_PWR);
+
 	return 0;
 }
 __initcall(omap_pm_init);
diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S
index 279490ce772..9f745836f6a 100644
--- a/arch/arm/plat-omap/sleep.S
+++ b/arch/arm/plat-omap/sleep.S
@@ -66,7 +66,7 @@ ENTRY(omap1510_idle_loop_suspend)
 	@ get ARM_IDLECT2 into r2
 	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
+	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -76,7 +76,7 @@ ENTRY(omap1510_idle_loop_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1510:	subs	r5, r5, #1
 	bne	l_1510
 /*
@@ -96,7 +96,7 @@ l_1510:	subs	r5, r5, #1
 	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
 
 ENTRY(omap1510_idle_loop_suspend_sz)
 	.word	. - omap1510_idle_loop_suspend
@@ -115,8 +115,8 @@ ENTRY(omap1610_idle_loop_suspend)
 	@ turn off clock domains
 	@ get ARM_IDLECT2 into r2
 	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	mov	r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00
+	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -126,7 +126,7 @@ ENTRY(omap1610_idle_loop_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1610:	subs	r5, r5, #1
 	bne	l_1610
 /*
@@ -146,7 +146,7 @@ l_1610:	subs	r5, r5, #1
 	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
 
 ENTRY(omap1610_idle_loop_suspend_sz)
 	.word	. - omap1610_idle_loop_suspend
@@ -208,7 +208,7 @@ ENTRY(omap1510_cpu_suspend)
 
 	@ turn off clock domains
 	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
+	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -217,7 +217,7 @@ ENTRY(omap1510_cpu_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1510_2:
 	subs	r5, r5, #1
 	bne	l_1510_2
@@ -237,7 +237,7 @@ l_1510_2:
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	@ restore regs and return
-	ldmfd   sp!, {r0 - r12, pc}
+	ldmfd	sp!, {r0 - r12, pc}
 
 ENTRY(omap1510_cpu_suspend_sz)
 	.word	. - omap1510_cpu_suspend
@@ -249,21 +249,26 @@ ENTRY(omap1610_cpu_suspend)
 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}
 
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
 	@ load base address of Traffic Controller
-	mov	r4, #TCMIF_ASM_BASE & 0xff000000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x0000ff00
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
 
 	@ prepare to put SDRAM into self-refresh manually
-	ldr	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #SELF_REFRESH_MODE & 0xff000000
-	orr	r5, r5, #SELF_REFRESH_MODE & 0x000000ff
-	str	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 
 	@ prepare to put EMIFS to Sleep
-	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #IDLE_EMIFS_REQUEST & 0xff
-	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 
 	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
 	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
@@ -271,26 +276,22 @@ ENTRY(omap1610_cpu_suspend)
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
 
 	@ turn off clock domains
-	mov	r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ work around errata of OMAP1610/5912. Enable (!) peripheral
-	@ clock to let the chip go into deep sleep
-	ldrh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- 	orr	r5,r5, #EN_PERCK_BIT & 0xff
+	@ do not disable PERCK (0x04)
+	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
-	mov	r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff
-	orr	r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00
+	mov	r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_1610_2:
-	subs	r5, r5, #1
-	bne	l_1610_2
+	@ disable instruction cache
+	mrc	p15, 0, r9, c1, c0, 0
+	bic	r2, r9, #0x1000
+	mcr	p15, 0, r2, c1, c0, 0
+	nop
+
 /*
  * Let's wait for the next wake up event to wake us up. r0 can't be
  * used here because r0 holds ARM_IDLECT1
@@ -301,13 +302,21 @@ l_1610_2:
  * omap1610_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ * stack.
  */
+	@ re-enable Icache
+	mcr	p15, 0, r9, c1, c0, 0
+
+	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
 	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
 	@ restore regs and return
-	ldmfd   sp!, {r0 - r12, pc}
+	ldmfd	sp!, {r0 - r12, pc}
 
 ENTRY(omap1610_cpu_suspend_sz)
 	.word	. - omap1610_cpu_suspend
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S
new file mode 100644
index 00000000000..4bea36964a0
--- /dev/null
+++ b/arch/arm/plat-omap/sram-fn.S
@@ -0,0 +1,58 @@
+/*
+ * linux/arch/arm/plat-omap/sram.S
+ *
+ * Functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+
+	.text
+
+/*
+ * Reprograms ULPD and CKCTL.
+ */
+ENTRY(sram_reprogram_clock)
+	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
+
+	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+
+	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	newck				@ nope
+	bic	r0, r0, #1 << 4			@ else clear lock bit
+	strh	r0, [r2]			@ set dpll into bypass mode
+	orr	r0, r0, #1 << 4			@ set lock bit again
+
+newck:
+	strh	r1, [r3]			@ write new ckctl value
+	strh	r0, [r2]			@ write new dpll value
+
+	mov	r4, #0x0700			@ let the clocks settle
+	orr	r4, r4, #0x00ff
+delay:	sub	r4, r4, #1
+	cmp	r4, #0
+	bne	delay
+
+lock:	ldrh	r4, [r2], #0			@ read back dpll value
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	out				@ nope
+	tst	r4, #1 << 0			@ dpll rate locked?
+	beq	lock				@ try again
+
+out:
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
+ENTRY(sram_reprogram_clock_sz)
+	.word	. - sram_reprogram_clock
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
new file mode 100644
index 00000000000..7719a4062e3
--- /dev/null
+++ b/arch/arm/plat-omap/sram.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/plat-omap/sram.c
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+#include "sram.h"
+
+#define OMAP1_SRAM_BASE		0xd0000000
+#define OMAP1_SRAM_START	0x20000000
+#define SRAM_BOOTLOADER_SZ	0x80
+
+static unsigned long omap_sram_base;
+static unsigned long omap_sram_size;
+static unsigned long omap_sram_ceil;
+
+/*
+ * The amount of SRAM depends on the core type:
+ * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+void __init omap_detect_sram(void)
+{
+	omap_sram_base = OMAP1_SRAM_BASE;
+
+	if (cpu_is_omap730())
+		omap_sram_size = 0x32000;
+	else if (cpu_is_omap1510())
+		omap_sram_size = 0x80000;
+	else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
+		omap_sram_size = 0x4000;
+	else if (cpu_is_omap1611())
+		omap_sram_size = 0x3e800;
+	else {
+		printk(KERN_ERR "Could not detect SRAM size\n");
+		omap_sram_size = 0x4000;
+	}
+
+	printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+}
+
+static struct map_desc omap_sram_io_desc[] __initdata = {
+	{ OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+};
+
+/*
+ * In order to use last 2kB of SRAM on 1611b, we must round the size
+ * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
+ * clock init needs SRAM early.
+ */
+void __init omap_map_sram(void)
+{
+	if (omap_sram_size == 0)
+		return;
+
+	omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
+	omap_sram_io_desc[0].length *= PAGE_SIZE;
+	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+	       omap_sram_size - SRAM_BOOTLOADER_SZ);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL;
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+	if (_omap_sram_reprogram_clock == NULL)
+		panic("Cannot use SRAM");
+
+	return _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+void * omap_sram_push(void * start, unsigned long size)
+{
+	if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+		printk(KERN_ERR "Not enough space in SRAM\n");
+		return NULL;
+	}
+	omap_sram_ceil -= size;
+	omap_sram_ceil &= ~0x3;
+	memcpy((void *)omap_sram_ceil, start, size);
+
+	return (void *)omap_sram_ceil;
+}
+
+void __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap_map_sram();
+	_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
+						    sram_reprogram_clock_sz);
+}
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
new file mode 100644
index 00000000000..71984efa6ae
--- /dev/null
+++ b/arch/arm/plat-omap/sram.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/plat-omap/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long sram_reprogram_clock_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 25bc4a8dd76..98f1c76f866 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -41,6 +41,7 @@
 
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ * Call omap_usb_init() once, from INIT_MACHINE().
  *
  * Some board-*.c files will need to set up additional mux options,
  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.