Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 253 deletions

diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig
deleted file mode 100644
index 9044f33299f..00000000000
--- a/arch/arm26/Kconfig
+++ /dev/null
@@ -1,253 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux Kernel Configuration"
-
-config ARM
-	bool
-	default y
-
-config ARM26
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config NO_DMA
-	def_bool y
-
-config ARCH_ACORN
-        bool
-        default y
-
-config CPU_26
-        bool
-        default y
-
-config FIQ
-        bool
-        default y
-
-# 9 = 512 pages 8 = 256 pages 7 = 128 pages
-config FORCE_MAX_ZONEORDER
-        int
-        default 9
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config ZONE_DMA
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
-source "init/Kconfig"
-
-
-menu "System Type"
-
-choice
-	prompt "Archimedes/A5000 Implementations"
-
-config ARCH_ARC
-        bool "Archimedes"
-        help
-          Say Y to support the Acorn Archimedes.
-
-	  The Acorn Archimedes was an personal computer based on an 8MHz ARM2
-          processor, released in 1987.  It supported up to 16MB of RAM in
-	  later models and floppy, harddisc, ethernet etc.
-
-config ARCH_A5K
-        bool "A5000"
-	select ARCH_MAY_HAVE_PC_FDC
-        help
-          Say Y here to support the Acorn A5000.
-
-	  Linux can support the
-          internal IDE disk and CD-ROM interface, serial and parallel port,
-          and the floppy drive.  Note that on some A5000s the floppy is
-          plugged into the wrong socket on the motherboard.
-
-config PAGESIZE_16
-        bool "2MB physical memory (broken)"
-        help
-          Say Y here if your Archimedes or A5000 system has only 2MB of
-          memory, otherwise say N.  The resulting kernel will not run on a
-          machine with 4MB of memory.
-endchoice
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "General setup"
-
-# Compressed boot loader in ROM.  Yes, we really want to ask about
-# TEXT and BSS so we preserve their values in the config files.
-config ZBOOT_ROM
-	bool "Compressed boot loader in ROM/flash"
-	help
-	  Say Y here if you intend to execute your compressed kernel image (zImage)
-	  directly from ROM or flash.  If unsure, say N.
-
-config ZBOOT_ROM_TEXT
-	depends on ZBOOT_ROM
-	hex "Compressed ROM boot loader base address"
-	default "0"
-	help
-	  The base address for zImage.  Unless you have special requirements, you
-	  should not change this value.
-
-config ZBOOT_ROM_BSS
-	depends on ZBOOT_ROM
-	hex "Compressed ROM boot loader BSS address"
-	default "0"
-	help
-	  The base address of 64KiB of read/write memory, which must be available
-	  while the decompressor is running.  Unless you have special requirements,
-	  you should not change this value.
-
-config XIP_KERNEL
-	bool "Execute In Place (XIP) kernel image"
-	help
-	  Select this option to create a kernel that can be programmed into
-	  the OS ROMs.
-
-comment "At least one math emulation must be selected"
-
-config FPE_NWFPE
-	tristate "NWFPE math emulation"
-	---help---
-	  Say Y to include the NWFPE floating point emulator in the kernel.
-	  This is necessary to run most binaries. Linux does not currently
-	  support floating point hardware so you need to say Y here even if
-	  your machine has an FPA or floating point co-processor module.
-
-	  It is also possible to say M to build the emulator as a module
-	  (nwfpe) or indeed to leave it out altogether. However, unless you
-	  know what you are doing this can easily render your machine
-	  unbootable. Saying Y is the safe option.
-
-	  You may say N here if you are going to load the Acorn FPEmulator
-	  early in the bootup.
-
-source "fs/Kconfig.binfmt"
-
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on CPU_32 && EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
-
-config ARTHUR
-	tristate "RISC OS personality"
-	depends on CPU_32
-	help
-	  Say Y here to include the kernel code necessary if you want to run
-	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
-	  experimental; if this sounds frightening, say N and sleep in peace.
-	  You can also say M here to compile this support as a module (which
-	  will be called arthur).
-
-config CMDLINE
-	string "Default kernel command string"
-	default ""
-	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
-	  for the boot loader to pass arguments to the kernel. For these
-	  architectures, you should supply some command-line options at build
-	  time by entering them here. As a minimum, you should specify the
-	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
-source "mm/Kconfig"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/base/Kconfig"
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-if ARCH_ACORN
-
-source "sound/Kconfig"
-
-endif
-
-source "drivers/misc/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/arm26/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"