diff options
author | merge <null@invalid> | 2009-01-22 13:55:32 +0000 |
---|---|---|
committer | Andy Green <agreen@octopus.localdomain> | 2009-01-22 13:55:32 +0000 |
commit | aa6f5ffbdba45aa8e19e5048648fc6c7b25376d3 (patch) | |
tree | fbb786d0ac6f8a774fd834e9ce951197e60fbffa /arch/mips/alchemy/common/power.c | |
parent | f2d78193eae5dccd3d588d2c8ea0866efc368332 (diff) |
MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141
pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040
stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch
mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
fix-stray-endmenu.patch
Signed-off-by: Andy Green <andy@openmoko.com>
Diffstat (limited to 'arch/mips/alchemy/common/power.c')
-rw-r--r-- | arch/mips/alchemy/common/power.c | 406 |
1 files changed, 79 insertions, 327 deletions
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index bd854a6d1d8..6ab7b42aa1b 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -35,25 +35,12 @@ #include <linux/jiffies.h> #include <asm/uaccess.h> -#include <asm/cacheflush.h> #include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_PM - -#define DEBUG 1 -#ifdef DEBUG -#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) -#else -#define DPRINTK(fmt, args...) +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#include <asm/mach-au1x00/au1xxx_dbdma.h> #endif -static void au1000_calibrate_delay(void); - -extern unsigned long save_local_and_disable(int controller); -extern void restore_local_and_enable(int controller, unsigned long mask); -extern void local_enable_irq(unsigned int irq_nr); - -static DEFINE_SPINLOCK(pm_lock); +#ifdef CONFIG_PM /* * We need to save/restore a bunch of core registers that are @@ -65,29 +52,16 @@ static DEFINE_SPINLOCK(pm_lock); * We only have to save/restore registers that aren't otherwise * done as part of a driver pm_* function. */ -static unsigned int sleep_aux_pll_cntrl; -static unsigned int sleep_cpu_pll_cntrl; -static unsigned int sleep_pin_function; -static unsigned int sleep_uart0_inten; -static unsigned int sleep_uart0_fifoctl; -static unsigned int sleep_uart0_linectl; -static unsigned int sleep_uart0_clkdiv; -static unsigned int sleep_uart0_enable; -static unsigned int sleep_usbhost_enable; -static unsigned int sleep_usbdev_enable; -static unsigned int sleep_static_memctlr[4][3]; +static unsigned int sleep_uart0_inten; +static unsigned int sleep_uart0_fifoctl; +static unsigned int sleep_uart0_linectl; +static unsigned int sleep_uart0_clkdiv; +static unsigned int sleep_uart0_enable; +static unsigned int sleep_usb[2]; +static unsigned int sleep_sys_clocks[5]; +static unsigned int sleep_sys_pinfunc; +static unsigned int sleep_static_memctlr[4][3]; -/* - * Define this to cause the value you write to /proc/sys/pm/sleep to - * set the TOY timer for the amount of time you want to sleep. - * This is done mainly for testing, but may be useful in other cases. - * The value is number of 32KHz ticks to sleep. - */ -#define SLEEP_TEST_TIMEOUT 1 -#ifdef SLEEP_TEST_TIMEOUT -static int sleep_ticks; -void wakeup_counter0_set(int ticks); -#endif static void save_core_regs(void) { @@ -105,31 +79,45 @@ static void save_core_regs(void) sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR); sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); + au_sync(); +#ifndef CONFIG_SOC_AU1200 /* Shutdown USB host/device. */ - sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); + sleep_usb[0] = au_readl(USB_HOST_CONFIG); /* There appears to be some undocumented reset register.... */ - au_writel(0, 0xb0100004); au_sync(); - au_writel(0, USB_HOST_CONFIG); au_sync(); + au_writel(0, 0xb0100004); + au_sync(); + au_writel(0, USB_HOST_CONFIG); + au_sync(); - sleep_usbdev_enable = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); au_sync(); + sleep_usb[1] = au_readl(USBD_ENABLE); + au_writel(0, USBD_ENABLE); + au_sync(); + +#else /* AU1200 */ + + /* enable access to OTG mmio so we can save OTG CAP/MUX. + * FIXME: write an OTG driver and move this stuff there! + */ + au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); + au_sync(); + sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */ + sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */ +#endif /* Save interrupt controller state. */ save_au1xxx_intctl(); /* Clocks and PLLs. */ - sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); + sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0); + sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1); + sleep_sys_clocks[2] = au_readl(SYS_CLKSRC); + sleep_sys_clocks[3] = au_readl(SYS_CPUPLL); + sleep_sys_clocks[4] = au_readl(SYS_AUXPLL); - /* - * We don't really need to do this one, but unless we - * write it again it won't have a valid value if we - * happen to read it. - */ - sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL); - - sleep_pin_function = au_readl(SYS_PINFUNC); + /* pin mux config */ + sleep_sys_pinfunc = au_readl(SYS_PINFUNC); /* Save the static memory controller configuration. */ sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); @@ -144,16 +132,45 @@ static void save_core_regs(void) sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + au1xxx_dbdma_suspend(); +#endif } static void restore_core_regs(void) { - extern void restore_au1xxx_intctl(void); - extern void wakeup_counter0_adjust(void); + /* restore clock configuration. Writing CPUPLL last will + * stall a bit and stabilize other clocks (unless this is + * one of those Au1000 with a write-only PLL, where we dont + * have a valid value) + */ + au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0); + au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1); + au_writel(sleep_sys_clocks[2], SYS_CLKSRC); + au_writel(sleep_sys_clocks[4], SYS_AUXPLL); + if (!au1xxx_cpu_has_pll_wo()) + au_writel(sleep_sys_clocks[3], SYS_CPUPLL); + au_sync(); - au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync(); - au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); - au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); + au_writel(sleep_sys_pinfunc, SYS_PINFUNC); + au_sync(); + +#ifndef CONFIG_SOC_AU1200 + au_writel(sleep_usb[0], USB_HOST_CONFIG); + au_writel(sleep_usb[1], USBD_ENABLE); + au_sync(); +#else + /* enable accces to OTG memory */ + au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); + au_sync(); + + /* restore OTG caps and port mux. */ + au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */ + au_sync(); + au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */ + au_sync(); +#endif /* Restore the static memory controller configuration. */ au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); @@ -184,282 +201,17 @@ static void restore_core_regs(void) } restore_au1xxx_intctl(); - wakeup_counter0_adjust(); -} - -unsigned long suspend_mode; -void wakeup_from_suspend(void) -{ - suspend_mode = 0; +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + au1xxx_dbdma_resume(); +#endif } -int au_sleep(void) +void au_sleep(void) { - unsigned long wakeup, flags; - extern void save_and_sleep(void); - - spin_lock_irqsave(&pm_lock, flags); - save_core_regs(); - - flush_cache_all(); - - /** - ** The code below is all system dependent and we should probably - ** have a function call out of here to set this up. You need - ** to configure the GPIO or timer interrupts that will bring - ** you out of sleep. - ** For testing, the TOY counter wakeup is useful. - **/ -#if 0 - au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); - - /* GPIO 6 can cause a wake up event */ - wakeup = au_readl(SYS_WAKEMSK); - wakeup &= ~(1 << 8); /* turn off match20 wakeup */ - wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ -#else - /* For testing, allow match20 to wake us up. */ -#ifdef SLEEP_TEST_TIMEOUT - wakeup_counter0_set(sleep_ticks); -#endif - wakeup = 1 << 8; /* turn on match20 wakeup */ - wakeup = 0; -#endif - au_writel(1, SYS_WAKESRC); /* clear cause */ - au_sync(); - au_writel(wakeup, SYS_WAKEMSK); - au_sync(); - - save_and_sleep(); - - /* - * After a wakeup, the cpu vectors back to 0x1fc00000, so - * it's up to the boot code to get us back here. - */ + au1xxx_save_and_sleep(); restore_core_regs(); - spin_unlock_irqrestore(&pm_lock, flags); - return 0; -} - -static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ -#ifdef SLEEP_TEST_TIMEOUT -#define TMPBUFLEN2 16 - char buf[TMPBUFLEN2], *p; -#endif - - if (!write) - *len = 0; - else { -#ifdef SLEEP_TEST_TIMEOUT - if (*len > TMPBUFLEN2 - 1) - return -EFAULT; - if (copy_from_user(buf, buffer, *len)) - return -EFAULT; - buf[*len] = 0; - p = buf; - sleep_ticks = simple_strtoul(p, &p, 0); -#endif - - au_sleep(); - } - return 0; -} - -static int pm_do_freq(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ - int retval = 0, i; - unsigned long val, pll; -#define TMPBUFLEN 64 -#define MAX_CPU_FREQ 396 - char buf[TMPBUFLEN], *p; - unsigned long flags, intc0_mask, intc1_mask; - unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; - unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; - unsigned long baud_rate; - - spin_lock_irqsave(&pm_lock, flags); - if (!write) - *len = 0; - else { - /* Parse the new frequency */ - if (*len > TMPBUFLEN - 1) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - if (copy_from_user(buf, buffer, *len)) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - buf[*len] = 0; - p = buf; - val = simple_strtoul(p, &p, 0); - if (val > MAX_CPU_FREQ) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - pll = val / 12; - if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ - /* Revisit this for higher speed CPUs */ - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - old_baud_base = get_au1x00_uart_baud_base(); - old_cpu_freq = get_au1x00_speed(); - - new_cpu_freq = pll * 12 * 1000000; - new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) - & 0x03) + 2) * 16)); - set_au1x00_speed(new_cpu_freq); - set_au1x00_uart_baud_base(new_baud_base); - - old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; - new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | - (au_readl(MEM_SDREFCFG) & ~0x1ffffff); - - au_writel(pll, SYS_CPUPLL); - au_sync_delay(1); - au_writel(new_refresh, MEM_SDREFCFG); - au_sync_delay(1); - - for (i = 0; i < 4; i++) - if (au_readl(UART_BASE + UART_MOD_CNTRL + - i * 0x00100000) == 3) { - old_clk = au_readl(UART_BASE + UART_CLK + - i * 0x00100000); - baud_rate = old_baud_base / old_clk; - /* - * We won't get an exact baud rate and the error - * could be significant enough that our new - * calculation will result in a clock that will - * give us a baud rate that's too far off from - * what we really want. - */ - if (baud_rate > 100000) - baud_rate = 115200; - else if (baud_rate > 50000) - baud_rate = 57600; - else if (baud_rate > 30000) - baud_rate = 38400; - else if (baud_rate > 17000) - baud_rate = 19200; - else - baud_rate = 9600; - new_clk = new_baud_base / baud_rate; - au_writel(new_clk, UART_BASE + UART_CLK + - i * 0x00100000); - au_sync_delay(10); - } - } - - /* - * We don't want _any_ interrupts other than match20. Otherwise our - * au1000_calibrate_delay() calculation will be off, potentially a lot. - */ - intc0_mask = save_local_and_disable(0); - intc1_mask = save_local_and_disable(1); - local_enable_irq(AU1000_TOY_MATCH2_INT); - spin_unlock_irqrestore(&pm_lock, flags); - au1000_calibrate_delay(); - restore_local_and_enable(0, intc0_mask); - restore_local_and_enable(1, intc1_mask); - - return retval; } - -static struct ctl_table pm_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "sleep", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_sleep - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "freq", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_freq - }, - {} -}; - -static struct ctl_table pm_dir_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "pm", - .mode = 0555, - .child = pm_table - }, - {} -}; - -/* - * Initialize power interface - */ -static int __init pm_init(void) -{ - register_sysctl_table(pm_dir_table); - return 0; -} - -__initcall(pm_init); - -/* - * This is right out of init/main.c - */ - -/* - * This is the number of bits of precision for the loops_per_jiffy. - * Each bit takes on average 1.5/HZ seconds. This (like the original) - * is a little better than 1%. - */ -#define LPS_PREC 8 - -static void au1000_calibrate_delay(void) -{ - unsigned long ticks, loopbit; - int lps_precision = LPS_PREC; - - loops_per_jiffy = 1 << 12; - - while (loops_per_jiffy <<= 1) { - /* Wait for "start of" clock tick */ - ticks = jiffies; - while (ticks == jiffies) - /* nothing */ ; - /* Go ... */ - ticks = jiffies; - __delay(loops_per_jiffy); - ticks = jiffies - ticks; - if (ticks) - break; - } - - /* - * Do a binary approximation to get loops_per_jiffy set to be equal - * one clock (up to lps_precision bits) - */ - loops_per_jiffy >>= 1; - loopbit = loops_per_jiffy; - while (lps_precision-- && (loopbit >>= 1)) { - loops_per_jiffy |= loopbit; - ticks = jiffies; - while (ticks == jiffies); - ticks = jiffies; - __delay(loops_per_jiffy); - if (jiffies != ticks) /* longer than 1 tick */ - loops_per_jiffy &= ~loopbit; - } -} #endif /* CONFIG_PM */ |