diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/katana.c |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/ppc/platforms/katana.c')
-rw-r--r-- | arch/ppc/platforms/katana.c | 795 |
1 files changed, 795 insertions, 0 deletions
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c new file mode 100644 index 00000000000..eda922ac316 --- /dev/null +++ b/arch/ppc/platforms/katana.c @@ -0,0 +1,795 @@ +/* + * arch/ppc/platforms/katana.c + * + * Board setup routines for the Artesyn Katana cPCI boards. + * + * Author: Tim Montgomery <timm@artesyncp.com> + * Maintained by: Mark A. Greer <mgreer@mvista.com> + * + * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il + * Based on code done by - Mark A. Greer <mgreer@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/* + * Supports the Artesyn 750i, 752i, and 3750. The 752i is virtually identical + * to the 750i except that it has an mv64460 bridge. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/initrd.h> +#include <linux/root_dev.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/bootmem.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx.h> +#ifdef CONFIG_BOOTIMG +#include <linux/bootimg.h> +#endif +#include <asm/page.h> +#include <asm/time.h> +#include <asm/smp.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppcboot.h> +#include <asm/mv64x60.h> +#include <platforms/katana.h> + +static struct mv64x60_handle bh; +static katana_id_t katana_id; +static void __iomem *cpld_base; +static void __iomem *sram_base; + +static u32 katana_flash_size_0; +static u32 katana_flash_size_1; + +static u32 katana_bus_frequency; + +unsigned char __res[sizeof(bd_t)]; + +/* PCI Interrupt routing */ +static int __init +katana_irq_lookup_750i(unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + /* IDSEL 4 (PMC 1) */ + { KATANA_PCI_INTB_IRQ_750i, KATANA_PCI_INTC_IRQ_750i, + KATANA_PCI_INTD_IRQ_750i, KATANA_PCI_INTA_IRQ_750i }, + /* IDSEL 5 (PMC 2) */ + { KATANA_PCI_INTC_IRQ_750i, KATANA_PCI_INTD_IRQ_750i, + KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i }, + /* IDSEL 6 (T8110) */ + {KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 }, + }; + const long min_idsel = 4, max_idsel = 6, irqs_per_slot = 4; + + return PCI_IRQ_TABLE_LOOKUP; +} + +static int __init +katana_irq_lookup_3750(unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { KATANA_PCI_INTA_IRQ_3750, 0, 0, 0 }, /* IDSEL 3 (BCM5691) */ + { KATANA_PCI_INTB_IRQ_3750, 0, 0, 0 }, /* IDSEL 4 (MV64360 #2)*/ + { KATANA_PCI_INTC_IRQ_3750, 0, 0, 0 }, /* IDSEL 5 (MV64360 #3)*/ + }; + const long min_idsel = 3, max_idsel = 5, irqs_per_slot = 4; + + return PCI_IRQ_TABLE_LOOKUP; +} + +static int __init +katana_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + switch (katana_id) { + case KATANA_ID_750I: + case KATANA_ID_752I: + return katana_irq_lookup_750i(idsel, pin); + + case KATANA_ID_3750: + return katana_irq_lookup_3750(idsel, pin); + + default: + printk(KERN_ERR "Bogus board ID\n"); + return 0; + } +} + +/* Board info retrieval routines */ +void __init +katana_get_board_id(void) +{ + switch (in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)) { + case KATANA_PRODUCT_ID_3750: + katana_id = KATANA_ID_3750; + break; + + case KATANA_PRODUCT_ID_750i: + katana_id = KATANA_ID_750I; + break; + + case KATANA_PRODUCT_ID_752i: + katana_id = KATANA_ID_752I; + break; + + default: + printk(KERN_ERR "Unsupported board\n"); + } +} + +int __init +katana_get_proc_num(void) +{ + u16 val; + u8 save_exclude; + static int proc = -1; + static u8 first_time = 1; + + if (first_time) { + if (katana_id != KATANA_ID_3750) + proc = 0; + else { + save_exclude = mv64x60_pci_exclude_bridge; + mv64x60_pci_exclude_bridge = 0; + + early_read_config_word(bh.hose_a, 0, + PCI_DEVFN(0,0), PCI_DEVICE_ID, &val); + + mv64x60_pci_exclude_bridge = save_exclude; + + switch(val) { + case PCI_DEVICE_ID_KATANA_3750_PROC0: + proc = 0; + break; + + case PCI_DEVICE_ID_KATANA_3750_PROC1: + proc = 1; + break; + + case PCI_DEVICE_ID_KATANA_3750_PROC2: + proc = 2; + break; + + default: + printk(KERN_ERR "Bogus Device ID\n"); + } + } + + first_time = 0; + } + + return proc; +} + +static inline int +katana_is_monarch(void) +{ + return in_8(cpld_base + KATANA_CPLD_BD_CFG_3) & + KATANA_CPLD_BD_CFG_3_MONARCH; +} + +static void __init +katana_setup_bridge(void) +{ + struct pci_controller hose; + struct mv64x60_setup_info si; + void __iomem *vaddr; + int i; + u16 val; + u8 save_exclude; + + /* + * Some versions of the Katana firmware mistakenly change the vendor + * & device id fields in the bridge's pci device (visible via pci + * config accesses). This breaks mv64x60_init() because those values + * are used to identify the type of bridge that's there. Artesyn + * claims that the subsystem vendor/device id's will have the correct + * Marvell values so this code puts back the correct values from there. + */ + memset(&hose, 0, sizeof(hose)); + vaddr = ioremap(CONFIG_MV64X60_NEW_BASE, MV64x60_INTERNAL_SPACE_SIZE); + setup_indirect_pci_nomap(&hose, vaddr + MV64x60_PCI0_CONFIG_ADDR, + vaddr + MV64x60_PCI0_CONFIG_DATA); + save_exclude = mv64x60_pci_exclude_bridge; + mv64x60_pci_exclude_bridge = 0; + + early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val); + + if (val != PCI_VENDOR_ID_MARVELL) { + early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), + PCI_SUBSYSTEM_VENDOR_ID, &val); + early_write_config_word(&hose, 0, PCI_DEVFN(0, 0), + PCI_VENDOR_ID, val); + early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), + PCI_SUBSYSTEM_ID, &val); + early_write_config_word(&hose, 0, PCI_DEVFN(0, 0), + PCI_DEVICE_ID, val); + } + + mv64x60_pci_exclude_bridge = save_exclude; + iounmap(vaddr); + + memset(&si, 0, sizeof(si)); + + si.phys_reg_base = CONFIG_MV64X60_NEW_BASE; + + si.pci_1.enable_bus = 1; + si.pci_1.pci_io.cpu_base = KATANA_PCI1_IO_START_PROC_ADDR; + si.pci_1.pci_io.pci_base_hi = 0; + si.pci_1.pci_io.pci_base_lo = KATANA_PCI1_IO_START_PCI_ADDR; + si.pci_1.pci_io.size = KATANA_PCI1_IO_SIZE; + si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; + si.pci_1.pci_mem[0].cpu_base = KATANA_PCI1_MEM_START_PROC_ADDR; + si.pci_1.pci_mem[0].pci_base_hi = KATANA_PCI1_MEM_START_PCI_HI_ADDR; + si.pci_1.pci_mem[0].pci_base_lo = KATANA_PCI1_MEM_START_PCI_LO_ADDR; + si.pci_1.pci_mem[0].size = KATANA_PCI1_MEM_SIZE; + si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; + si.pci_1.pci_cmd_bits = 0; + si.pci_1.latency_timer = 0x80; + + for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) { +#if defined(CONFIG_NOT_COHERENT_CACHE) + si.cpu_prot_options[i] = 0; + si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; + si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; + si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; + + si.pci_1.acc_cntl_options[i] = + MV64360_PCI_ACC_CNTL_SNOOP_NONE | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | + MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; +#else + si.cpu_prot_options[i] = 0; + si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */ + si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */ + si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */ + + si.pci_1.acc_cntl_options[i] = + MV64360_PCI_ACC_CNTL_SNOOP_WB | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | + MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; +#endif + } + + /* Lookup PCI host bridges */ + if (mv64x60_init(&bh, &si)) + printk(KERN_WARNING "Bridge initialization failed.\n"); + + pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */ + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = katana_map_irq; + ppc_md.pci_exclude_device = mv64x60_pci_exclude_device; + + mv64x60_set_bus(&bh, 1, 0); + bh.hose_b->first_busno = 0; + bh.hose_b->last_busno = 0xff; +} + +/* Bridge & platform setup routines */ +void __init +katana_intr_setup(void) +{ + /* MPP 8, 9, and 10 */ + mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff); + + /* MPP 14 */ + if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) + mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0x0f000000); + + /* + * Define GPP 8,9,and 10 interrupt polarity as active low + * input signal and level triggered + */ + mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700); + mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700); + + if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) { + mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, (1<<14)); + mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, (1<<14)); + } + + /* Config GPP intr ctlr to respond to level trigger */ + mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10)); + + /* Erranum FEr PCI-#8 */ + mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9)); + mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9)); + + /* + * Dismiss and then enable interrupt on GPP interrupt cause + * for CPU #0 + */ + mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700); + mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700); + + if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) { + mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1<<14)); + mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1<<14)); + } + + /* + * Dismiss and then enable interrupt on CPU #0 high cause reg + * BIT25 summarizes GPP interrupts 8-15 + */ + mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25)); +} + +void __init +katana_setup_peripherals(void) +{ + u32 base; + + /* Set up windows for boot CS, soldered & socketed flash, and CPLD */ + mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, + KATANA_BOOT_WINDOW_BASE, KATANA_BOOT_WINDOW_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN); + + /* Assume firmware set up window sizes correctly for dev 0 & 1 */ + mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, &base, + &katana_flash_size_0); + + if (katana_flash_size_0 > 0) { + mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, + KATANA_SOLDERED_FLASH_BASE, katana_flash_size_0, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN); + } + + mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, &base, + &katana_flash_size_1); + + if (katana_flash_size_1 > 0) { + mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, + (KATANA_SOLDERED_FLASH_BASE + katana_flash_size_0), + katana_flash_size_1, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + } + + mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, + KATANA_SOCKET_BASE, KATANA_SOCKETED_FLASH_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN); + + mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, + KATANA_CPLD_BASE, KATANA_CPLD_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN); + cpld_base = ioremap(KATANA_CPLD_BASE, KATANA_CPLD_SIZE); + + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, + KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); + sram_base = ioremap(KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE); + + /* Set up Enet->SRAM window */ + mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, + KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2); + bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN); + + /* Give enet r/w access to memory region */ + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1))); + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1))); + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1))); + + mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3)); + mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, + ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24))); + + /* Must wait until window set up before retrieving board id */ + katana_get_board_id(); + + /* Enumerate pci bus (must know board id before getting proc number) */ + if (katana_get_proc_num() == 0) + bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, 0); + +#if defined(CONFIG_NOT_COHERENT_CACHE) + mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000); +#else + mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2); +#endif + + /* + * Setting the SRAM to 0. Note that this generates parity errors on + * internal data path in SRAM since it's first time accessing it + * while after reset it's not configured. + */ + memset(sram_base, 0, MV64360_SRAM_SIZE); + + /* Only processor zero [on 3750] is an PCI interrupt controller */ + if (katana_get_proc_num() == 0) + katana_intr_setup(); +} + +static void __init +katana_enable_ipmi(void) +{ + u8 reset_out; + + /* Enable access to IPMI ctlr by clearing IPMI PORTSEL bit in CPLD */ + reset_out = in_8(cpld_base + KATANA_CPLD_RESET_OUT); + reset_out &= ~KATANA_CPLD_RESET_OUT_PORTSEL; + out_8(cpld_base + KATANA_CPLD_RESET_OUT, reset_out); +} + +static void __init +katana_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("katana_setup_arch: enter", 0); + + set_tb(0, 0); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_SDA2; +#endif + + /* + * Set up the L2CR register. + * + * 750FX has only L2E, L2PE (bits 2-8 are reserved) + * DD2.0 has bug that requires the L2 to be in WRT mode + * avoid dirty data in cache + */ + if (PVR_REV(mfspr(SPRN_PVR)) == 0x0200) { + printk(KERN_INFO "DD2.0 detected. Setting L2 cache" + "to Writethrough mode\n"); + _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT); + } else + _set_L2CR(L2CR_L2E | L2CR_L2PE); + + if (ppc_md.progress) + ppc_md.progress("katana_setup_arch: calling setup_bridge", 0); + + katana_setup_bridge(); + katana_setup_peripherals(); + katana_enable_ipmi(); + + katana_bus_frequency = katana_bus_freq(cpld_base); + + printk(KERN_INFO "Artesyn Communication Products, LLC - Katana(TM)\n"); + if (ppc_md.progress) + ppc_md.progress("katana_setup_arch: exit", 0); +} + +/* Platform device data fixup routines. */ +#if defined(CONFIG_SERIAL_MPSC) +static void __init +katana_fixup_mpsc_pdata(struct platform_device *pdev) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pdev->dev.platform_data; + + pdata->max_idle = 40; + pdata->default_baud = KATANA_DEFAULT_BAUD; + pdata->brg_clk_src = KATANA_MPSC_CLK_SRC; + /* + * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts, + * TCLK == SysCLK but on 64460, they are separate pins. + * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz. + */ + pdata->brg_clk_freq = min(katana_bus_frequency, MV64x60_TCLK_FREQ_MAX); +} +#endif + +#if defined(CONFIG_MV643XX_ETH) +static void __init +katana_fixup_eth_pdata(struct platform_device *pdev) +{ + struct mv643xx_eth_platform_data *eth_pd; + static u16 phy_addr[] = { + KATANA_ETH0_PHY_ADDR, + KATANA_ETH1_PHY_ADDR, + KATANA_ETH2_PHY_ADDR, + }; + + eth_pd = pdev->dev.platform_data; + eth_pd->force_phy_addr = 1; + eth_pd->phy_addr = phy_addr[pdev->id]; + eth_pd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE; + eth_pd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE; +} +#endif + +static int __init +katana_platform_notify(struct device *dev) +{ + static struct { + char *bus_id; + void ((*rtn)(struct platform_device *pdev)); + } dev_map[] = { +#if defined(CONFIG_SERIAL_MPSC) + { MPSC_CTLR_NAME ".0", katana_fixup_mpsc_pdata }, + { MPSC_CTLR_NAME ".1", katana_fixup_mpsc_pdata }, +#endif +#if defined(CONFIG_MV643XX_ETH) + { MV643XX_ETH_NAME ".0", katana_fixup_eth_pdata }, + { MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata }, + { MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata }, +#endif + }; + struct platform_device *pdev; + int i; + + if (dev && dev->bus_id) + for (i=0; i<ARRAY_SIZE(dev_map); i++) + if (!strncmp(dev->bus_id, dev_map[i].bus_id, + BUS_ID_SIZE)) { + + pdev = container_of(dev, + struct platform_device, dev); + dev_map[i].rtn(pdev); + } + + return 0; +} + +#ifdef CONFIG_MTD_PHYSMAP + +#ifndef MB +#define MB (1 << 20) +#endif + +/* + * MTD Layout depends on amount of soldered FLASH in system. Sizes in MB. + * + * FLASH Amount: 128 64 32 16 + * ------------- --- -- -- -- + * Monitor: 1 1 1 1 + * Primary Kernel: 1.5 1.5 1.5 1.5 + * Primary fs: 30 30 <end> <end> + * Secondary Kernel: 1.5 1.5 N/A N/A + * Secondary fs: <end> <end> N/A N/A + * User: <overlays entire FLASH except for "Monitor" section> + */ +static int __init +katana_setup_mtd(void) +{ + u32 size; + int ptbl_entries; + static struct mtd_partition *ptbl; + + size = katana_flash_size_0 + katana_flash_size_1; + if (!size) + return -ENOMEM; + + ptbl_entries = (size >= (64*MB)) ? 6 : 4; + + if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition), + GFP_KERNEL)) == NULL) { + + printk(KERN_WARNING "Can't alloc MTD partition table\n"); + return -ENOMEM; + } + memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition)); + + ptbl[0].name = "Monitor"; + ptbl[0].size = KATANA_MTD_MONITOR_SIZE; + ptbl[1].name = "Primary Kernel"; + ptbl[1].offset = MTDPART_OFS_NXTBLK; + ptbl[1].size = 0x00180000; /* 1.5 MB */ + ptbl[2].name = "Primary Filesystem"; + ptbl[2].offset = MTDPART_OFS_APPEND; + ptbl[2].size = MTDPART_SIZ_FULL; /* Correct for 16 & 32 MB */ + ptbl[ptbl_entries-1].name = "User FLASH"; + ptbl[ptbl_entries-1].offset = KATANA_MTD_MONITOR_SIZE; + ptbl[ptbl_entries-1].size = MTDPART_SIZ_FULL; + + if (size >= (64*MB)) { + ptbl[2].size = 30*MB; + ptbl[3].name = "Secondary Kernel"; + ptbl[3].offset = MTDPART_OFS_NXTBLK; + ptbl[3].size = 0x00180000; /* 1.5 MB */ + ptbl[4].name = "Secondary Filesystem"; + ptbl[4].offset = MTDPART_OFS_APPEND; + ptbl[4].size = MTDPART_SIZ_FULL; + } + + physmap_map.size = size; + physmap_set_partitions(ptbl, ptbl_entries); + return 0; +} + +arch_initcall(katana_setup_mtd); +#endif + +static void +katana_restart(char *cmd) +{ + ulong i = 10000000; + + /* issue hard reset to the reset command register */ + out_8(cpld_base + KATANA_CPLD_RST_CMD, KATANA_CPLD_RST_CMD_HR); + + while (i-- > 0) ; + panic("restart failed\n"); +} + +static void +katana_halt(void) +{ + u8 v; + + if (katana_id == KATANA_ID_752I) { + v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF); + v |= HSL_PLD_HOT_SWAP_LED_BIT; + out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v); + } + + while (1) ; + /* NOTREACHED */ +} + +static void +katana_power_off(void) +{ + katana_halt(); + /* NOTREACHED */ +} + +static int +katana_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n"); + + seq_printf(m, "board\t\t: "); + + switch (katana_id) { + case KATANA_ID_3750: + seq_printf(m, "Katana 3750\n"); + break; + + case KATANA_ID_750I: + seq_printf(m, "Katana 750i\n"); + break; + + case KATANA_ID_752I: + seq_printf(m, "Katana 752i\n"); + break; + + default: + seq_printf(m, "Unknown\n"); + break; + } + + seq_printf(m, "product ID\t: 0x%x\n", + in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)); + seq_printf(m, "hardware rev\t: 0x%x\n", + in_8(cpld_base+KATANA_CPLD_HARDWARE_VER)); + seq_printf(m, "PLD rev\t\t: 0x%x\n", + in_8(cpld_base + KATANA_CPLD_PLD_VER)); + seq_printf(m, "PLB freq\t: %ldMhz\n", + (long)katana_bus_frequency / 1000000); + seq_printf(m, "PCI\t\t: %sMonarch\n", katana_is_monarch()? "" : "Non-"); + + return 0; +} + +static void __init +katana_calibrate_decr(void) +{ + u32 freq; + + freq = katana_bus_frequency / 4; + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + (long)freq / 1000000, (long)freq % 1000000); + + tb_ticks_per_jiffy = freq / HZ; + tb_to_us = mulhwu_scale_factor(freq, 1000000); +} + +unsigned long __init +katana_find_end_of_memory(void) +{ + return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE, + MV64x60_TYPE_MV64360); +} + +#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00) +extern ulong m41t00_get_rtc_time(void); +extern int m41t00_set_rtc_time(ulong); + +static int __init +katana_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = m41t00_get_rtc_time; + ppc_md.set_rtc_time = m41t00_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(katana_rtc_hookup); +#endif + +static inline void +katana_set_bat(void) +{ + mb(); + mtspr(SPRN_DBAT2U, 0xf0001ffe); + mtspr(SPRN_DBAT2L, 0xf000002a); + mb(); +} + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) +static void __init +katana_map_io(void) +{ + io_block_mapping(0xf8100000, 0xf8100000, 0x00020000, _PAGE_IO); +} +#endif + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) + * are non-zero, then we should use the board info from the bd_t + * structure and the cmdline pointed to by r6 instead of the + * information from birecs, if any. Otherwise, use the information + * from birecs as discovered by the preceeding call to + * parse_bootinfo(). This rule should work with both PPCBoot, which + * uses a bd_t board info structure, and the kernel boot wrapper, + * which uses birecs. + */ + if (r3 && r6) { + /* copy board info structure */ + memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); + /* copy command line */ + *(char *)(r7+KERNELBASE) = 0; + strcpy(cmd_line, (char *)(r6+KERNELBASE)); + } + + isa_mem_base = 0; + + ppc_md.setup_arch = katana_setup_arch; + ppc_md.show_cpuinfo = katana_show_cpuinfo; + ppc_md.init_IRQ = mv64360_init_irq; + ppc_md.get_irq = mv64360_get_irq; + ppc_md.restart = katana_restart; + ppc_md.power_off = katana_power_off; + ppc_md.halt = katana_halt; + ppc_md.find_end_of_memory = katana_find_end_of_memory; + ppc_md.calibrate_decr = katana_calibrate_decr; + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) + ppc_md.setup_io_mappings = katana_map_io; + ppc_md.progress = mv64x60_mpsc_progress; + mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE); +#endif + +#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) + platform_notify = katana_platform_notify; +#endif + + katana_set_bat(); /* Need for katana_find_end_of_memory and progress */ +} |