[POWERPC] Remove the broken Gemini support

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

6 files changed, 0 insertions, 914 deletions

diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 90c62229442..e17fad47062 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_TQM8260)		+= tqm8260_setup.o
 obj-$(CONFIG_CPCI690)		+= cpci690.o
 obj-$(CONFIG_EV64260)		+= ev64260.o
 obj-$(CONFIG_CHESTNUT)		+= chestnut.o
-obj-$(CONFIG_GEMINI)		+= gemini_pci.o gemini_setup.o gemini_prom.o
 obj-$(CONFIG_LOPEC)		+= lopec.o
 obj-$(CONFIG_KATANA)		+= katana.o
 obj-$(CONFIG_HDPU)		+= hdpu.o
diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h
deleted file mode 100644
index 5528fd0a121..00000000000
--- a/arch/ppc/platforms/gemini.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *  Onboard registers and descriptions for Synergy Microsystems'
- *  "Gemini" boards.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_GEMINI_H
-#define __PPC_GEMINI_H
-
-/*  Registers  */
-
-#define GEMINI_SERIAL_B     (0xffeffb00)
-#define GEMINI_SERIAL_A     (0xffeffb08)
-#define GEMINI_USWITCH      (0xffeffd00)
-#define GEMINI_BREV         (0xffeffe00)
-#define GEMINI_BECO         (0xffeffe08)
-#define GEMINI_FEAT         (0xffeffe10)
-#define GEMINI_BSTAT        (0xffeffe18)
-#define GEMINI_CPUSTAT      (0xffeffe20)
-#define GEMINI_L2CFG        (0xffeffe30)
-#define GEMINI_MEMCFG       (0xffeffe38)
-#define GEMINI_FLROM        (0xffeffe40)
-#define GEMINI_P0PCI        (0xffeffe48)
-#define GEMINI_FLWIN        (0xffeffe50)
-#define GEMINI_P0INTMASK    (0xffeffe60)
-#define GEMINI_P0INTAP      (0xffeffe68)
-#define GEMINI_PCIERR       (0xffeffe70)
-#define GEMINI_LEDBASE      (0xffeffe80)
-#define GEMINI_RTC          (0xffe9fff8)
-#define GEMINI_LEDS         8
-#define GEMINI_SWITCHES     8
-
-
-/* Flash ROM bit definitions */
-#define GEMINI_FLS_WEN      (1<<0)
-#define GEMINI_FLS_JMP      (1<<6)
-#define GEMINI_FLS_BOOT     (1<<7)
-
-/* Memory bit definitions */
-#define GEMINI_MEM_TYPE_MASK 0xc0
-#define GEMINI_MEM_SIZE_MASK 0x38
-#define GEMINI_MEM_BANK_MASK 0x07
-
-/* L2 cache bit definitions */
-#define GEMINI_L2_SIZE_MASK  0xc0
-#define GEMINI_L2_RATIO_MASK 0x03
-
-/* Timebase register bit definitons */
-#define GEMINI_TIMEB0_EN     (1<<0)
-#define GEMINI_TIMEB1_EN     (1<<1)
-#define GEMINI_TIMEB2_EN     (1<<2)
-#define GEMINI_TIMEB3_EN     (1<<3)
-
-/* CPU status bit definitions */
-#define GEMINI_CPU_ID_MASK   0x03
-#define GEMINI_CPU_COUNT_MASK 0x0c
-#define GEMINI_CPU0_HALTED   (1<<4)
-#define GEMINI_CPU1_HALTED   (1<<5)
-#define GEMINI_CPU2_HALTED   (1<<6)
-#define GEMINI_CPU3_HALTED   (1<<7)
-
-/* Board status bit definitions */
-#define GEMINI_BRD_FAIL      (1<<0)   /* FAIL led is lit */
-#define GEMINI_BRD_BUS_MASK  0x0c     /* PowerPC bus speed */
-
-/* Board family/feature bit descriptions */
-#define GEMINI_FEAT_HAS_FLASH (1<<0)
-#define GEMINI_FEAT_HAS_ETH   (1<<1)
-#define GEMINI_FEAT_HAS_SCSI  (1<<2)
-#define GEMINI_FEAT_HAS_P0    (1<<3)
-#define GEMINI_FEAT_FAM_MASK  0xf0
-
-/* Mod/ECO bit definitions */
-#define GEMINI_ECO_LEVEL_MASK 0x0f
-#define GEMINI_MOD_MASK       0xf0
-
-/* Type/revision bit definitions */
-#define GEMINI_REV_MASK       0x0f
-#define GEMINI_TYPE_MASK      0xf0
-
-/* User switch definitions */
-#define GEMINI_SWITCH_VERBOSE    1     /* adds "debug" to boot cmd line */
-#define GEMINI_SWITCH_SINGLE_USER 7    /* boots into "single-user" mode */
-
-#define SGS_RTC_CONTROL  0
-#define SGS_RTC_SECONDS  1
-#define SGS_RTC_MINUTES  2
-#define SGS_RTC_HOURS    3
-#define SGS_RTC_DAY      4
-#define SGS_RTC_DAY_OF_MONTH 5
-#define SGS_RTC_MONTH    6
-#define SGS_RTC_YEAR     7
-
-#define SGS_RTC_SET  0x80
-#define SGS_RTC_IS_STOPPED 0x80
-
-#define GRACKLE_CONFIG_ADDR_ADDR  (0xfec00000)
-#define GRACKLE_CONFIG_DATA_ADDR  (0xfee00000)
-
-#define GEMINI_BOOT_INIT  (0xfff00100)
-
-#ifndef __ASSEMBLY__
-
-static inline void grackle_write( unsigned long addr, unsigned long data )
-{
-  __asm__ __volatile__(
-  " stwbrx %1, 0, %0\n \
-    sync\n \
-    stwbrx %3, 0, %2\n \
-    sync "
-  : /* no output */
-  : "r" (GRACKLE_CONFIG_ADDR_ADDR), "r" (addr),
-    "r" (GRACKLE_CONFIG_DATA_ADDR), "r" (data));
-}
-
-static inline unsigned long grackle_read( unsigned long addr )
-{
-  unsigned long val;
-
-  __asm__ __volatile__(
-  " stwbrx %1, 0, %2\n \
-    sync\n \
-    lwbrx %0, 0, %3\n \
-    sync "
-  : "=r" (val)
-  : "r" (addr), "r" (GRACKLE_CONFIG_ADDR_ADDR),
-    "r" (GRACKLE_CONFIG_DATA_ADDR));
-
-  return val;
-}
-
-static inline void gemini_led_on( int led )
-{
-  if (led >= 0 && led < GEMINI_LEDS)
-    *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 1;
-}
-
-static inline void gemini_led_off(int led)
-{
-  if (led >= 0 && led < GEMINI_LEDS)
-    *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 0;
-}
-
-static inline int gemini_led_val(int led)
-{
-  int val = 0;
-  if (led >= 0 && led < GEMINI_LEDS)
-    val = *(unsigned char *)(GEMINI_LEDBASE + (led<<3));
-  return (val & 0x1);
-}
-
-/* returns processor id from the board */
-static inline int gemini_processor(void)
-{
-  unsigned char cpu = *(unsigned char *)(GEMINI_CPUSTAT);
-  return (int) ((cpu == 0) ? 4 : (cpu & GEMINI_CPU_ID_MASK));
-}
-
-
-extern void _gemini_reboot(void);
-extern void gemini_prom_init(void);
-extern void gemini_init_l2(void);
-#endif /* __ASSEMBLY__ */
-#endif
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/gemini_pci.c b/arch/ppc/platforms/gemini_pci.c
deleted file mode 100644
index 95656091ba2..00000000000
--- a/arch/ppc/platforms/gemini_pci.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/machdep.h>
-#include <platforms/gemini.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pci-bridge.h>
-
-void __init gemini_pcibios_fixup(void)
-{
-	int i;
-	struct pci_dev *dev = NULL;
-	
-	for_each_pci_dev(dev) {
-		for(i = 0; i < 6; i++) {
-			if (dev->resource[i].flags & IORESOURCE_IO) {
-				dev->resource[i].start |= (0xfe << 24);
-				dev->resource[i].end |= (0xfe << 24);
-			}
-		}
-	}
-}
-
-
-/* The "bootloader" for Synergy boards does none of this for us, so we need to
-   lay it all out ourselves... --Dan */
-void __init gemini_find_bridges(void)
-{
-	struct pci_controller* hose;
-	
-	ppc_md.pcibios_fixup = gemini_pcibios_fixup;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
-}
diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S
deleted file mode 100644
index e8c84d24f01..00000000000
--- a/arch/ppc/platforms/gemini_prom.S
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  Not really prom support code (yet), but sort of anti-prom code.  The current
- *  bootloader does a number of things it shouldn't and doesn't do things that it
- *  should.  The stuff in here is mainly a hodge-podge collection of setup code
- *  to get the board up and running.
- *    ---Dan
- */
-
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <platforms/gemini.h>
-#include <asm/ppc_asm.h>
-
-/*
- *  On 750's the MMU is on when Linux is booted, so we need to clear out the
- *  bootloader's BAT settings, make sure we're in supervisor state (gotcha!),
- *  and turn off the MMU.
- *
- */
-
-_GLOBAL(gemini_prom_init)
-#ifdef CONFIG_SMP
-	/* Since the MMU's on, get stuff in rom space that we'll need */
-	lis	r4,GEMINI_CPUSTAT@h
-	ori	r4,r4,GEMINI_CPUSTAT@l
-	lbz	r5,0(r4)
-	andi.	r5,r5,3
-	mr	r24,r5		/* cpu # used later on */
-#endif
-	mfmsr	r4
-	li	r3,MSR_PR	/* ensure supervisor! */
-	ori	r3,r3,MSR_IR|MSR_DR
-	andc	r4,r4,r3
-	mtmsr	r4
-	isync
-#if 0
-	/* zero out the bats now that the MMU is off */
-prom_no_mmu:	
-	li	r3,0
-        mtspr   SPRN_IBAT0U,r3
-        mtspr   SPRN_IBAT0L,r3
-        mtspr   SPRN_IBAT1U,r3
-        mtspr   SPRN_IBAT1L,r3
-        mtspr   SPRN_IBAT2U,r3
-        mtspr   SPRN_IBAT2L,r3
-        mtspr   SPRN_IBAT3U,r3
-        mtspr   SPRN_IBAT3L,r3
-
-        mtspr   SPRN_DBAT0U,r3
-        mtspr   SPRN_DBAT0L,r3
-        mtspr   SPRN_DBAT1U,r3
-        mtspr   SPRN_DBAT1L,r3
-        mtspr   SPRN_DBAT2U,r3
-	mtspr   SPRN_DBAT2L,r3
-        mtspr   SPRN_DBAT3U,r3
-        mtspr   SPRN_DBAT3L,r3
-#endif
-
-	/* the bootloader (as far as I'm currently aware) doesn't mess with page
-	   tables, but since we're already here, might as well zap these, too */
-	li	r4,0
-	mtspr	SPRN_SDR1,r4
-
-	li	r4,16
-	mtctr	r4
-	li	r3,0
-	li	r4,0
-3:	mtsrin	r3,r4
-	addi	r3,r3,1
-	bdnz	3b
-
-#ifdef CONFIG_SMP
-	/* The 750 book (and Mot/IBM support) says that this will "assist" snooping
-	   when in SMP.  Not sure yet whether this should stay or leave... */
-	mfspr	r4,SPRN_HID0
-	ori	r4,r4,HID0_ABE
-	mtspr	SPRN_HID0,r4
-	sync
-#endif /* CONFIG_SMP */
-	blr
-
-/*  apparently, SMon doesn't pay attention to HID0[SRST].  Disable the MMU and
-    branch to 0xfff00100 */
-_GLOBAL(_gemini_reboot)
-	lis	r5,GEMINI_BOOT_INIT@h
-	ori	r5,r5,GEMINI_BOOT_INIT@l
-	li	r6,MSR_IP
-	mtspr	SPRN_SRR0,r5
-	mtspr	SPRN_SRR1,r6
-	rfi
diff --git a/arch/ppc/platforms/gemini_serial.h b/arch/ppc/platforms/gemini_serial.h
deleted file mode 100644
index b915eff79fd..00000000000
--- a/arch/ppc/platforms/gemini_serial.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifdef __KERNEL__
-#ifndef __ASMPPC_GEMINI_SERIAL_H
-#define __ASMPPC_GEMINI_SERIAL_H
-
-#include <platforms/gemini.h>
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  4
-#endif
-
-/* Rate for the 24.576 Mhz clock for the onboard serial chip */
-#define BASE_BAUD  (24576000 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DEFNS \
-        { 0, BASE_BAUD, GEMINI_SERIAL_A, 15, STD_COM_FLAGS }, /* ttyS0 */ \
-        { 0, BASE_BAUD, GEMINI_SERIAL_B, 14, STD_COM_FLAGS }, /* ttyS1 */ \
-
-#ifdef CONFIG_GEMINI_PU32
-#define PU32_SERIAL_PORT_DEFNS \
-        { 0, BASE_BAUD, NULL, 0, STD_COM_FLAGS },
-#else
-#define PU32_SERIAL_PORT_DEFNS
-#endif
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DEFNS \
-        PU32_SERIAL_PORT_DEFNS
-
-#endif
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c
deleted file mode 100644
index f48048f362a..00000000000
--- a/arch/ppc/platforms/gemini_setup.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- *  Copyright (C) 1995 Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Synergy Microsystems board support by Dan Cox (dan@synergymicro.com)
- *
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/time.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/bcd.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/m48t35.h>
-#include <platforms/gemini.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-void gemini_find_bridges(void);
-static int gemini_get_clock_speed(void);
-extern void gemini_pcibios_fixup(void);
-
-static char *gemini_board_families[] = {
-  "VGM", "VSS", "KGM", "VGR", "VCM", "VCS", "KCM", "VCR"
-};
-static int gemini_board_count = sizeof(gemini_board_families) /
-                                 sizeof(gemini_board_families[0]);
-
-static unsigned int cpu_7xx[16] = {
-	0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static unsigned int cpu_6xx[16] = {
-	0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0
-};
-
-/*
- * prom_init is the Gemini version of prom.c:prom_init.  We only need
- * the BSS clearing code, so I copied that out of prom.c.  This is a
- * lot simpler than hacking prom.c so it will build with Gemini. -VAL
- */
-
-#define PTRRELOC(x)	((typeof(x))((unsigned long)(x) + offset))
-
-unsigned long
-prom_init(void)
-{
-	unsigned long offset = reloc_offset();
-	unsigned long phys;
-	extern char __bss_start, _end;
-
-	/* First zero the BSS -- use memset, some arches don't have
-	 * caches on yet */
-	memset_io(PTRRELOC(&__bss_start),0 , &_end - &__bss_start);
-
- 	/* Default */
- 	phys = offset + KERNELBASE;
-
-	gemini_prom_init();
-
-	return phys;
-}
-
-int
-gemini_show_cpuinfo(struct seq_file *m)
-{
-	unsigned char reg, rev;
-	char *family;
-	unsigned int type;
-
-	reg = readb(GEMINI_FEAT);
-	family = gemini_board_families[((reg>>4) & 0xf)];
-	if (((reg>>4) & 0xf) > gemini_board_count)
-		printk(KERN_ERR "cpuinfo(): unable to determine board family\n");
-
-	reg = readb(GEMINI_BREV);
-	type = (reg>>4) & 0xf;
-	rev = reg & 0xf;
-
-	reg = readb(GEMINI_BECO);
-
-	seq_printf(m, "machine\t\t: Gemini %s%d, rev %c, eco %d\n",
-		   family, type, (rev + 'A'), (reg & 0xf));
-
-	seq_printf(m, "board\t\t: Gemini %s", family);
-	if (type > 9)
-		seq_printf(m, "%c", (type - 10) + 'A');
-	else
-		seq_printf(m, "%d", type);
-
-	seq_printf(m, ", rev %c, eco %d\n", (rev + 'A'), (reg & 0xf));
-
-	seq_printf(m, "clock\t\t: %dMhz\n", gemini_get_clock_speed());
-
-	return 0;
-}
-
-static u_char gemini_openpic_initsenses[] = {
-	1,
-	1,
-	1,
-	1,
-	0,
-	0,
-	1, /* remainder are level-triggered */
-};
-
-#define GEMINI_MPIC_ADDR (0xfcfc0000)
-#define GEMINI_MPIC_PCI_CFG (0x80005800)
-
-void __init gemini_openpic_init(void)
-{
-
-	OpenPIC_Addr = (volatile struct OpenPIC *)
-		grackle_read(GEMINI_MPIC_PCI_CFG + 0x10);
-	OpenPIC_InitSenses = gemini_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof( gemini_openpic_initsenses );
-
-	ioremap( GEMINI_MPIC_ADDR, OPENPIC_SIZE);
-}
-
-
-extern unsigned long loops_per_jiffy;
-extern int root_mountflags;
-extern char cmd_line[];
-
-void
-gemini_heartbeat(void)
-{
-	static unsigned long led = GEMINI_LEDBASE+(4*8);
-	static char direction = 8;
-
-
-	/* We only want to do this on 1 CPU */
-	if (smp_processor_id())
-		return;
-	*(char *)led = 0;
-	if ( (led + direction) > (GEMINI_LEDBASE+(7*8)) ||
-	     (led + direction) < (GEMINI_LEDBASE+(4*8)) )
-		direction *= -1;
-	led += direction;
-	*(char *)led = 0xff;
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-void __init gemini_setup_arch(void)
-{
-	extern char cmd_line[];
-
-
-	loops_per_jiffy = 50000000/HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* bootable off CDROM */
-	if (initrd_start)
-		ROOT_DEV = Root_SR0;
-	else
-#endif
-		ROOT_DEV = Root_SDA1;
-
-	/* nothing but serial consoles... */
-	sprintf(cmd_line, "%s console=ttyS0", cmd_line);
-
-	printk("Boot arguments: %s\n", cmd_line);
-
-	ppc_md.heartbeat = gemini_heartbeat;
-	ppc_md.heartbeat_reset = HZ/8;
-	ppc_md.heartbeat_count = 1;
-
-	/* Lookup PCI hosts */
-	gemini_find_bridges();
-	/* take special pains to map the MPIC, since it isn't mapped yet */
-	gemini_openpic_init();
-	/* start the L2 */
-	gemini_init_l2();
-}
-
-
-int
-gemini_get_clock_speed(void)
-{
-	unsigned long hid1, pvr;
-	int clock;
-
-	pvr = mfspr(SPRN_PVR);
-	hid1 = (mfspr(SPRN_HID1) >> 28) & 0xf;
-	if (PVR_VER(pvr) == 8 ||
-	    PVR_VER(pvr) == 12)
-		hid1 = cpu_7xx[hid1];
-	else
-		hid1 = cpu_6xx[hid1];
-
-	switch((readb(GEMINI_BSTAT) & 0xc) >> 2) {
-
-	case 0:
-	default:
-		clock = (hid1*100)/3;
-		break;
-
-	case 1:
-		clock = (hid1*125)/3;
-		break;
-
-	case 2:
-		clock = (hid1*50);
-		break;
-	}
-
-	return clock;
-}
-
-void __init gemini_init_l2(void)
-{
-        unsigned char reg, brev, fam, creg;
-        unsigned long cache;
-        unsigned long pvr;
-
-        reg = readb(GEMINI_L2CFG);
-        brev = readb(GEMINI_BREV);
-        fam = readb(GEMINI_FEAT);
-        pvr = mfspr(SPRN_PVR);
-
-        switch(PVR_VER(pvr)) {
-
-        case 8:
-                if (reg & 0xc0)
-                        cache = (((reg >> 6) & 0x3) << 28);
-                else
-                        cache = 0x3 << 28;
-
-#ifdef CONFIG_SMP
-                /* Pre-3.0 processor revs had snooping errata.  Leave
-                   their L2's disabled with SMP. -- Dan */
-                if (PVR_CFG(pvr) < 3) {
-                        printk("Pre-3.0 750; L2 left disabled!\n");
-                        return;
-                }
-#endif /* CONFIG_SMP */
-
-                /* Special case: VGM5-B's came before L2 ratios were set on
-                   the board.  Processor speed shouldn't be too high, so
-                   set L2 ratio to 1:1.5.  */
-                if ((brev == 0x51) && ((fam & 0xa0) >> 4) == 0)
-                        reg |= 1;
-
-                /* determine best cache ratio based upon what the board
-                   tells us (which sometimes _may_ not be true) and
-                   the processor speed. */
-                else {
-                        if (gemini_get_clock_speed() > 250)
-                                reg = 2;
-                }
-                break;
-        case 12:
-	{
-		static unsigned long l2_size_val = 0;
-
-		if (!l2_size_val)
-			l2_size_val = _get_L2CR();
-		cache = l2_size_val;
-                break;
-	}
-        case 4:
-        case 9:
-                creg = readb(GEMINI_CPUSTAT);
-                if (((creg & 0xc) >> 2) != 1)
-                        printk("Dual-604 boards don't support the use of L2\n");
-                else
-                        writeb(1, GEMINI_L2CFG);
-                return;
-        default:
-                printk("Unknown processor; L2 left disabled\n");
-                return;
-        }
-
-        cache |= ((1<<reg) << 25);
-        cache |= (L2CR_L2RAM_MASK|L2CR_L2CTL|L2CR_L2DO);
-        _set_L2CR(0);
-        _set_L2CR(cache | L2CR_L2E);
-
-}
-
-void
-gemini_restart(char *cmd)
-{
-	local_irq_disable();
-	/* make a clean restart, not via the MPIC */
-	_gemini_reboot();
-	for(;;);
-}
-
-void
-gemini_power_off(void)
-{
-	for(;;);
-}
-
-void
-gemini_halt(void)
-{
-	gemini_restart(NULL);
-}
-
-void __init gemini_init_IRQ(void)
-{
-	/* gemini has no 8259 */
-	openpic_init(1, 0, 0, -1);
-}
-
-#define gemini_rtc_read(x)       (readb(GEMINI_RTC+(x)))
-#define gemini_rtc_write(val,x)  (writeb((val),(GEMINI_RTC+(x))))
-
-/* ensure that the RTC is up and running */
-long __init gemini_time_init(void)
-{
-	unsigned char reg;
-
-	reg = gemini_rtc_read(M48T35_RTC_CONTROL);
-
-	if ( reg & M48T35_RTC_STOPPED ) {
-		printk(KERN_INFO "M48T35 real-time-clock was stopped. Now starting...\n");
-		gemini_rtc_write((reg & ~(M48T35_RTC_STOPPED)), M48T35_RTC_CONTROL);
-		gemini_rtc_write((reg | M48T35_RTC_SET), M48T35_RTC_CONTROL);
-	}
-	return 0;
-}
-
-#undef DEBUG_RTC
-
-unsigned long
-gemini_get_rtc_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	unsigned char reg;
-
-	reg = gemini_rtc_read(M48T35_RTC_CONTROL);
-	gemini_rtc_write((reg|M48T35_RTC_READ), M48T35_RTC_CONTROL);
-#ifdef DEBUG_RTC
-	printk("get rtc: reg = %x\n", reg);
-#endif
-
-	do {
-		sec = gemini_rtc_read(M48T35_RTC_SECONDS);
-		min = gemini_rtc_read(M48T35_RTC_MINUTES);
-		hour = gemini_rtc_read(M48T35_RTC_HOURS);
-		day = gemini_rtc_read(M48T35_RTC_DOM);
-		mon = gemini_rtc_read(M48T35_RTC_MONTH);
-		year = gemini_rtc_read(M48T35_RTC_YEAR);
-	} while( sec != gemini_rtc_read(M48T35_RTC_SECONDS));
-#ifdef DEBUG_RTC
-	printk("get rtc: sec=%x, min=%x, hour=%x, day=%x, mon=%x, year=%x\n",
-	       sec, min, hour, day, mon, year);
-#endif
-
-	gemini_rtc_write(reg, M48T35_RTC_CONTROL);
-
-	BCD_TO_BIN(sec);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(hour);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(year);
-
-	if ((year += 1900) < 1970)
-		year += 100;
-#ifdef DEBUG_RTC
-	printk("get rtc: sec=%x, min=%x, hour=%x, day=%x, mon=%x, year=%x\n",
-	       sec, min, hour, day, mon, year);
-#endif
-
-	return mktime( year, mon, day, hour, min, sec );
-}
-
-
-int
-gemini_set_rtc_time( unsigned long now )
-{
-	unsigned char reg;
-	struct rtc_time tm;
-
-	to_tm( now, &tm );
-
-	reg = gemini_rtc_read(M48T35_RTC_CONTROL);
-#ifdef DEBUG_RTC
-	printk("set rtc: reg = %x\n", reg);
-#endif
-
-	gemini_rtc_write((reg|M48T35_RTC_SET), M48T35_RTC_CONTROL);
-#ifdef DEBUG_RTC
-	printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n",
-	       tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year);
-#endif
-
-	tm.tm_year -= 1900;
-	BIN_TO_BCD(tm.tm_sec);
-	BIN_TO_BCD(tm.tm_min);
-	BIN_TO_BCD(tm.tm_hour);
-	BIN_TO_BCD(tm.tm_mon);
-	BIN_TO_BCD(tm.tm_mday);
-	BIN_TO_BCD(tm.tm_year);
-#ifdef DEBUG_RTC
-	printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n",
-	       tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year);
-#endif
-
-	gemini_rtc_write(tm.tm_sec, M48T35_RTC_SECONDS);
-	gemini_rtc_write(tm.tm_min, M48T35_RTC_MINUTES);
-	gemini_rtc_write(tm.tm_hour, M48T35_RTC_HOURS);
-	gemini_rtc_write(tm.tm_mday, M48T35_RTC_DOM);
-	gemini_rtc_write(tm.tm_mon, M48T35_RTC_MONTH);
-	gemini_rtc_write(tm.tm_year, M48T35_RTC_YEAR);
-
-	/* done writing */
-	gemini_rtc_write(reg, M48T35_RTC_CONTROL);
-
-	return 0;
-}
-
-/*  use the RTC to determine the decrementer count */
-void __init gemini_calibrate_decr(void)
-{
-	int freq, divisor;
-	unsigned char reg;
-
-	/* determine processor bus speed */
-	reg = readb(GEMINI_BSTAT);
-
-	switch(((reg & 0x0c)>>2)&0x3) {
-	case 0:
-	default:
-		freq = 66667;
-		break;
-	case 1:
-		freq = 83000;
-		break;
-	case 2:
-		freq = 100000;
-		break;
-	}
-
-	freq *= 1000;
-	divisor = 4;
-	tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-unsigned long __init gemini_find_end_of_memory(void)
-{
-	unsigned long total;
-	unsigned char reg;
-
-	reg = readb(GEMINI_MEMCFG);
-	total = ((1<<((reg & 0x7) - 1)) *
-		 (8<<((reg >> 3) & 0x7)));
-	total *= (1024*1024);
-	return total;
-}
-
-static void __init
-gemini_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO);
-}
-
-#ifdef CONFIG_SMP
-static int
-smp_gemini_probe(void)
-{
-	int i, nr;
-
-        nr = (readb(GEMINI_CPUSTAT) & GEMINI_CPU_COUNT_MASK) >> 2;
-	if (nr == 0)
-		nr = 4;
-
-	if (nr > 1) {
-		openpic_request_IPIs();
-		for (i = 1; i < nr; ++i)
-			smp_hw_index[i] = i;
-	}
-
-	return nr;
-}
-
-static void
-smp_gemini_kick_cpu(int nr)
-{
-	openpic_reset_processor_phys(1 << nr);
-	openpic_reset_processor_phys(0);
-}
-
-static void
-smp_gemini_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-	if (cpu_nr > 0)
-		gemini_init_l2();
-}
-
-static struct smp_ops_t gemini_smp_ops = {
-	smp_openpic_message_pass,
-	smp_gemini_probe,
-	smp_gemini_kick_cpu,
-	smp_gemini_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7)
-{
-	int i;
-
-	/* Restore BATs for now */
-	mtspr(SPRN_DBAT3U, 0xf0001fff);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	parse_bootinfo(find_bootinfo());
-
-	for(i = 0; i < GEMINI_LEDS; i++)
-		gemini_led_off(i);
-
-	ISA_DMA_THRESHOLD = 0;
-	DMA_MODE_READ = 0;
-	DMA_MODE_WRITE = 0;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif
-
-	ppc_md.setup_arch = gemini_setup_arch;
-	ppc_md.show_cpuinfo = gemini_show_cpuinfo;
-	ppc_md.init_IRQ = gemini_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = NULL;
-
-	ppc_md.restart = gemini_restart;
-	ppc_md.power_off = gemini_power_off;
-	ppc_md.halt = gemini_halt;
-
-	ppc_md.time_init = gemini_time_init;
-	ppc_md.set_rtc_time = gemini_set_rtc_time;
-	ppc_md.get_rtc_time = gemini_get_rtc_time;
-	ppc_md.calibrate_decr = gemini_calibrate_decr;
-
-	ppc_md.find_end_of_memory = gemini_find_end_of_memory;
-	ppc_md.setup_io_mappings = gemini_map_io;
-
-	ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup;
-
-#ifdef CONFIG_SMP
-	smp_ops = &gemini_smp_ops;
-#endif /* CONFIG_SMP */
-}