Merge /spare/repo/linux-2.6/

1 files changed, 184 insertions, 3 deletions

diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
index e3c73b3425d..a05b50b738e 100644
--- a/arch/ppc64/kernel/misc.S
+++ b/arch/ppc64/kernel/misc.S
@@ -680,6 +680,177 @@ _GLOBAL(kernel_thread)
 	ld	r30,-16(r1)
 	blr
 
+/* kexec_wait(phys_cpu)
+ *
+ * wait for the flag to change, indicating this kernel is going away but
+ * the slave code for the next one is at addresses 0 to 100.
+ *
+ * This is used by all slaves.
+ *
+ * Physical (hardware) cpu id should be in r3.
+ */
+_GLOBAL(kexec_wait)
+	bl	1f
+1:	mflr	r5
+	addi	r5,r5,kexec_flag-1b
+
+99:	HMT_LOW
+#ifdef CONFIG_KEXEC		/* use no memory without kexec */
+	lwz	r4,0(r5)
+	cmpwi	0,r4,0
+	bnea	0x60
+#endif
+	b	99b
+
+/* this can be in text because we won't change it until we are
+ * running in real anyways
+ */
+kexec_flag:
+	.long	0
+
+
+#ifdef CONFIG_KEXEC
+
+/* kexec_smp_wait(void)
+ *
+ * call with interrupts off
+ * note: this is a terminal routine, it does not save lr
+ *
+ * get phys id from paca
+ * set paca id to -1 to say we got here
+ * switch to real mode
+ * join other cpus in kexec_wait(phys_id)
+ */
+_GLOBAL(kexec_smp_wait)
+	lhz	r3,PACAHWCPUID(r13)
+	li	r4,-1
+	sth	r4,PACAHWCPUID(r13)	/* let others know we left */
+	bl	real_mode
+	b	.kexec_wait
+
+/*
+ * switch to real mode (turn mmu off)
+ * we use the early kernel trick that the hardware ignores bits
+ * 0 and 1 (big endian) of the effective address in real mode
+ *
+ * don't overwrite r3 here, it is live for kexec_wait above.
+ */
+real_mode:	/* assume normal blr return */
+1:	li	r9,MSR_RI
+	li	r10,MSR_DR|MSR_IR
+	mflr	r11		/* return address to SRR0 */
+	mfmsr	r12
+	andc	r9,r12,r9
+	andc	r10,r12,r10
+
+	mtmsrd	r9,1
+	mtspr	SPRN_SRR1,r10
+	mtspr	SPRN_SRR0,r11
+	rfid
+
+
+/*
+ * kexec_sequence(newstack, start, image, control, clear_all())
+ *
+ * does the grungy work with stack switching and real mode switches
+ * also does simple calls to other code
+ */
+
+_GLOBAL(kexec_sequence)
+	mflr	r0
+	std	r0,16(r1)
+
+	/* switch stacks to newstack -- &kexec_stack.stack */
+	stdu	r1,THREAD_SIZE-112(r3)
+	mr	r1,r3
+
+	li	r0,0
+	std	r0,16(r1)
+
+	/* save regs for local vars on new stack.
+	 * yes, we won't go back, but ...
+	 */
+	std	r31,-8(r1)
+	std	r30,-16(r1)
+	std	r29,-24(r1)
+	std	r28,-32(r1)
+	std	r27,-40(r1)
+	std	r26,-48(r1)
+	std	r25,-56(r1)
+
+	stdu	r1,-112-64(r1)
+
+	/* save args into preserved regs */
+	mr	r31,r3			/* newstack (both) */
+	mr	r30,r4			/* start (real) */
+	mr	r29,r5			/* image (virt) */
+	mr	r28,r6			/* control, unused */
+	mr	r27,r7			/* clear_all() fn desc */
+	mr	r26,r8			/* spare */
+	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
+
+	/* disable interrupts, we are overwriting kernel data next */
+	mfmsr	r3
+	rlwinm	r3,r3,0,17,15
+	mtmsrd	r3,1
+
+	/* copy dest pages, flush whole dest image */
+	mr	r3,r29
+	bl	.kexec_copy_flush	/* (image) */
+
+	/* turn off mmu */
+	bl	real_mode
+
+	/* clear out hardware hash page table and tlb */
+	ld	r5,0(r27)		/* deref function descriptor */
+	mtctr	r5
+	bctrl				/* ppc_md.hash_clear_all(void); */
+
+/*
+ *   kexec image calling is:
+ *      the first 0x100 bytes of the entry point are copied to 0
+ *
+ *      all slaves branch to slave = 0x60 (absolute)
+ *              slave(phys_cpu_id);
+ *
+ *      master goes to start = entry point
+ *              start(phys_cpu_id, start, 0);
+ *
+ *
+ *   a wrapper is needed to call existing kernels, here is an approximate
+ *   description of one method:
+ *
+ * v2: (2.6.10)
+ *   start will be near the boot_block (maybe 0x100 bytes before it?)
+ *   it will have a 0x60, which will b to boot_block, where it will wait
+ *   and 0 will store phys into struct boot-block and load r3 from there,
+ *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
+ *
+ * v1: (2.6.9)
+ *    boot block will have all cpus scanning device tree to see if they
+ *    are the boot cpu ?????
+ *    other device tree differences (prop sizes, va vs pa, etc)...
+ */
+
+	/* copy  0x100 bytes starting at start to 0 */
+	li	r3,0
+	mr	r4,r30
+	li	r5,0x100
+	li	r6,0
+	bl	.copy_and_flush	/* (dest, src, copy limit, start offset) */
+1:	/* assume normal blr return */
+
+	/* release other cpus to the new kernel secondary start at 0x60 */
+	mflr	r5
+	li	r6,1
+	stw	r6,kexec_flag-1b(5)
+	mr	r3,r25	# my phys cpu
+	mr	r4,r30	# start, aka phys mem offset
+	mtlr	4
+	li	r5,0
+	blr	/* image->start(physid, image->start, 0); */
+#endif /* CONFIG_KEXEC */
+
 /* Why isn't this a) automatic, b) written in 'C'? */	
 	.balign 8
 _GLOBAL(sys_call_table32)
@@ -951,11 +1122,16 @@ _GLOBAL(sys_call_table32)
 	.llong .compat_sys_mq_timedreceive /* 265 */
 	.llong .compat_sys_mq_notify
 	.llong .compat_sys_mq_getsetattr
-	.llong .sys_ni_syscall		/* 268 reserved for sys_kexec_load */
+	.llong .compat_sys_kexec_load
 	.llong .sys32_add_key
-	.llong .sys32_request_key
+	.llong .sys32_request_key	/* 270 */
 	.llong .compat_sys_keyctl
 	.llong .compat_sys_waitid
+	.llong .sys32_ioprio_set
+	.llong .sys32_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch
 
 	.balign 8
 _GLOBAL(sys_call_table)
@@ -1227,8 +1403,13 @@ _GLOBAL(sys_call_table)
 	.llong .sys_mq_timedreceive	/* 265 */
 	.llong .sys_mq_notify
 	.llong .sys_mq_getsetattr
-	.llong .sys_ni_syscall		/* 268 reserved for sys_kexec_load */
+	.llong .sys_kexec_load
 	.llong .sys_add_key
 	.llong .sys_request_key		/* 270 */
 	.llong .sys_keyctl
 	.llong .sys_waitid
+	.llong .sys_ioprio_set
+	.llong .sys_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch