sh: Kill off dead bigsur and ec3104 boards.

Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 0 insertions, 348 deletions

diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile
deleted file mode 100644
index 178891534b6..00000000000
--- a/arch/sh/boards/ec3104/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the EC3104 specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o
-
diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c
deleted file mode 100644
index 2f86394b280..00000000000
--- a/arch/sh/boards/ec3104/io.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/io.c
- *  EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip.  While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/ec3104/ec3104.h>
-
-/*
- * EC3104 has a real ISA bus which we redirect low port accesses to (the
- * actual device on mine is a ESS 1868, and I don't want to hack the driver
- * more than strictly necessary).  I am not going to duplicate the
- * hard coding of PC addresses (for the 16550s aso) here though;  it's just
- * too ugly.
- */
-
-#define low_port(port) ((port) < 0x10000)
-
-static inline unsigned long port2addr(unsigned long port)
-{
-	switch(port >> 16) {
-	case 0:
-		return EC3104_ISA_BASE + port * 2;
-
-		/* XXX hack. it's unclear what to do about the serial ports */
-	case 1:
-		return EC3104_BASE + (port&0xffff) * 4;
-
-	default:
-		/* XXX PCMCIA */
-		return 0;
-	}
-}
-
-unsigned char ec3104_inb(unsigned long port)
-{
-	u8 ret;
-
-	ret = *(volatile u8 *)port2addr(port);
-
-	return ret;
-}
-
-unsigned short ec3104_inw(unsigned long port)
-{
-	BUG();
-}
-
-unsigned long ec3104_inl(unsigned long port)
-{
-	BUG();
-}
-
-void ec3104_outb(unsigned char data, unsigned long port)
-{
-	*(volatile u8 *)port2addr(port) = data;
-}
-
-void ec3104_outw(unsigned short data, unsigned long port)
-{
-	BUG();
-}
-
-void ec3104_outl(unsigned long data, unsigned long port)
-{
-	BUG();
-}
diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c
deleted file mode 100644
index ffa4ff1f090..00000000000
--- a/arch/sh/boards/ec3104/irq.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/irq.c
- * EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/ec3104/ec3104.h>
-
-/* This is for debugging mostly;  here's the table that I intend to keep
- * in here:
- *
- *   index      function        base addr       power           interrupt bit
- *       0      power           b0ec0000        ---             00000001 (unused)
- *       1      irqs            b0ec1000        ---             00000002 (unused)
- *       2      ??              b0ec2000        b0ec0008        00000004
- *       3      PS2 (1)         b0ec3000        b0ec000c        00000008
- *       4      PS2 (2)         b0ec4000        b0ec0010        00000010
- *       5      ??              b0ec5000        b0ec0014        00000020
- *       6      I2C             b0ec6000        b0ec0018        00000040
- *       7      serial (1)      b0ec7000        b0ec001c        00000080
- *       8      serial (2)      b0ec8000        b0ec0020        00000100
- *       9      serial (3)      b0ec9000        b0ec0024        00000200
- *      10      serial (4)      b0eca000        b0ec0028        00000400
- *      12      GPIO (1)        b0ecc000        b0ec0030
- *      13      GPIO (2)        b0ecc000        b0ec0030
- *      16      pcmcia (1)      b0ed0000        b0ec0040        00010000
- *      17      pcmcia (2)      b0ed1000        b0ec0044        00020000
- */
-
-/* I used the register names from another interrupt controller I worked with,
- * since it seems to be identical to the ec3104 except that all bits are
- * inverted:
- *
- * IRR: Interrupt Request Register (pending and enabled interrupts)
- * IMR: Interrupt Mask Register (which interrupts are enabled)
- * IPR: Interrupt Pending Register (pending interrupts, even disabled ones)
- *
- * 0 bits mean pending or enabled, 1 bits mean not pending or disabled.  all
- * IRQs seem to be level-triggered.
- */
-
-#define EC3104_IRR (EC3104_BASE + 0x1000)
-#define EC3104_IMR (EC3104_BASE + 0x1004)
-#define EC3104_IPR (EC3104_BASE + 0x1008)
-
-#define ctrl_readl(addr) (*(volatile u32 *)(addr))
-#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data))
-#define ctrl_readb(addr) (*(volatile u8 *)(addr))
-
-static char *ec3104_name(unsigned index)
-{
-        switch(index) {
-        case 0:
-                return "power management";
-        case 1:
-                return "interrupts";
-        case 3:
-                return "PS2 (1)";
-        case 4:
-                return "PS2 (2)";
-        case 5:
-                return "I2C (1)";
-        case 6:
-                return "I2C (2)";
-        case 7:
-                return "serial (1)";
-        case 8:
-                return "serial (2)";
-        case 9:
-                return "serial (3)";
-        case 10:
-                return "serial (4)";
-        case 16:
-                return "pcmcia (1)";
-        case 17:
-                return "pcmcia (2)";
-        default: {
-                static char buf[32];
-
-                sprintf(buf, "unknown (%d)", index);
-
-                return buf;
-                }
-        }
-}
-
-int get_pending_interrupts(char *buf)
-{
-        u32 ipr;
-        u32 bit;
-        char *p = buf;
-
-        p += sprintf(p, "pending: (");
-
-        ipr = ctrl_inl(EC3104_IPR);
-
-        for (bit = 1; bit < 32; bit++)
-                if (!(ipr & (1<<bit)))
-                        p += sprintf(p, "%s ", ec3104_name(bit));
-
-        p += sprintf(p, ")\n");
-
-        return p - buf;
-}
-
-static inline u32 ec3104_irq2mask(unsigned int irq)
-{
-        return (1 << (irq - EC3104_IRQBASE));
-}
-
-static inline void mask_ec3104_irq(unsigned int irq)
-{
-        u32 mask;
-
-        mask = ctrl_readl(EC3104_IMR);
-
-        mask |= ec3104_irq2mask(irq);
-
-        ctrl_writel(mask, EC3104_IMR);
-}
-
-static inline void unmask_ec3104_irq(unsigned int irq)
-{
-        u32 mask;
-
-        mask = ctrl_readl(EC3104_IMR);
-
-        mask &= ~ec3104_irq2mask(irq);
-
-        ctrl_writel(mask, EC3104_IMR);
-}
-
-static void disable_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-}
-
-static void enable_ec3104_irq(unsigned int irq)
-{
-        unmask_ec3104_irq(irq);
-}
-
-static void mask_and_ack_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-}
-
-static void end_ec3104_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                unmask_ec3104_irq(irq);
-}
-
-static unsigned int startup_ec3104_irq(unsigned int irq)
-{
-        unmask_ec3104_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-
-}
-
-static struct hw_interrupt_type ec3104_int = {
-        .typename       = "EC3104",
-        .enable         = enable_ec3104_irq,
-        .disable        = disable_ec3104_irq,
-        .ack            = mask_and_ack_ec3104_irq,
-        .end            = end_ec3104_irq,
-        .startup        = startup_ec3104_irq,
-        .shutdown       = shutdown_ec3104_irq,
-};
-
-/* Yuck.  the _demux API is ugly */
-int ec3104_irq_demux(int irq)
-{
-        if (irq == EC3104_IRQ) {
-                unsigned int mask;
-
-                mask = ctrl_readl(EC3104_IRR);
-
-                if (mask == 0xffffffff)
-                        return EC3104_IRQ;
-                else
-                        return EC3104_IRQBASE + ffz(mask);
-        }
-
-        return irq;
-}
diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c
deleted file mode 100644
index 902bc975a13..00000000000
--- a/arch/sh/boards/ec3104/setup.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/sh/boards/ec3104/setup.c
- *  EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip.  While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/mach/ec3104.h>
-
-static void __init ec3104_setup(char **cmdline_p)
-{
-	char str[8];
-	int i;
-
-	for (i=0; i<8; i++)
-		str[i] = ctrl_readb(EC3104_BASE + i);
-
-	for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
-		irq_desc[i].handler = &ec3104_int;
-
-	printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
-	       str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
-	/* mask all interrupts.  this should have been done by the boot
-	 * loader for us but we want to be sure ... */
-	ctrl_writel(0xffffffff, EC3104_IMR);
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_ec3104 __initmv = {
-	.mv_name	= "EC3104",
-	.mv_setup	= ec3104_setup,
-	.mv_nr_irqs	= 96,
-
-	.mv_inb		= ec3104_inb,
-	.mv_inw		= ec3104_inw,
-	.mv_inl		= ec3104_inl,
-	.mv_outb	= ec3104_outb,
-	.mv_outw	= ec3104_outw,
-	.mv_outl	= ec3104_outl,
-
-	.mv_irq_demux	= ec3104_irq_demux,
-};
-ALIAS_MV(ec3104)