aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/drivers/pci/pci-sh7780.c
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2006-09-27 16:43:28 +0900
committerPaul Mundt <lethal@linux-sh.org>2006-09-27 16:43:28 +0900
commit959f85f8a3223c116bbe95dd8a9b207790b5d4d3 (patch)
treee7da9ccf292f860bfa0ff9cc8b2682cd1d6bad4d /arch/sh/drivers/pci/pci-sh7780.c
parente108b2ca2349f510ce7d7f910eda89f71d710d84 (diff)
sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we currently have, and attempts to consolidate the duplication in the SH7780 and SH7751 PCI controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh7780.c')
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c270
1 files changed, 34 insertions, 236 deletions
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index e09721330ac..bd3064a8208 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -20,197 +20,36 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
#include <linux/errno.h>
-#include <linux/irq.h>
#include <linux/delay.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include "pci-sh7780.h"
-
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-extern int pci_fixup_pcic(void);
-
-/*
- * Direct access to PCI hardware...
- */
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh7780_pci_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- u32 data;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- local_irq_save(flags);
- outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR));
- data = inl(PCI_REG(SH7780_PCIPDR));
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
+#include "pci-sh4.h"
/*
- * Since SH7780 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space.
+ *
+ * Note that the platform specific initialization (BSC registers, and memory
+ * space mapping) will be called via the platform defined function
+ * pcibios_init_platform().
*/
-static int sh7780_pci_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
+static int __init sh7780_pci_init(void)
{
- unsigned long flags;
- int shift;
- u32 data;
-
- local_irq_save(flags);
- outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR));
- data = inl(PCI_REG(SH7780_PCIPDR));
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- outl(data, PCI_REG(SH7780_PCIPDR));
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-struct pci_ops sh7780_pci_ops = {
- .read = sh7780_pci_read,
- .write = sh7780_pci_write,
-};
+ unsigned int id;
+ int ret;
-static int __init pci_check_direct(void)
-{
- unsigned int tmp, id;
+ pr_debug("PCI: Starting intialization.\n");
outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
- id = inl(PCI_REG(SH7780_PCIVID));
+ id = pci_read_reg(SH7780_PCIVID);
if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
(id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
return -ENODEV;
}
- /*
- * Check if configuration works.
- */
- if (pci_probe & PCI_PROBE_CONF1) {
- tmp = inl(PCI_REG(SH7780_PCIPAR));
- outl(0x80000000, PCI_REG(SH7780_PCIPAR));
- if (inl(PCI_REG(SH7780_PCIPAR)) == 0x80000000) {
- outl(tmp, PCI_REG(SH7780_PCIPAR));
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(PCI_REG(SH7780_PCIPAR), 8, "PCI conf1");
- return 0;
- }
- outl(tmp, PCI_REG(SH7780_PCIPAR));
- }
-
- pr_debug("PCI: pci_check_direct failed\n");
- return -EINVAL;
-}
-
-/***************************************************************************************/
-
-/*
- * Handle bus scanning and fixups ....
- */
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-/*
- * Called after each bus is probed, but before its children
- * are examined.
- */
-
-void __init pcibios_fixup_bus(struct pci_bus *b)
-{
- pci_read_bridge_bases(b);
-}
-
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it
- * exists and via the platform defined function pcibios_init_platform().
- * See pci_bigsur.c for implementation;
- *
- * The BIOS version of the pci functions is not yet implemented but it is left
- * in for completeness. Currently an error will be genereated at compile time.
- */
-
-static int __init sh7780_pci_init(void)
-{
- int ret;
-
- pr_debug("PCI: Starting intialization.\n");
-
/* Setup the INTC */
ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */
ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */
@@ -219,15 +58,14 @@ static int __init sh7780_pci_init(void)
ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */
- if ((ret = pci_check_direct()) != 0)
+ if ((ret = sh4_pci_check_direct()) != 0)
return ret;
return pcibios_init_platform();
}
-
core_initcall(sh7780_pci_init);
-int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
+int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
{
u32 word;
@@ -236,25 +74,25 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
* bootloader and doing it here means the MAC addresses loaded
* by the bootloader get lost.
*/
- if (!(map->flags & SH7780_PCIC_NO_RESET)) {
+ if (!(map->flags & SH4_PCIC_NO_RESET)) {
/* toggle PCI reset pin */
- word = SH7780_PCICR_PREFIX | SH7780_PCICR_PRST;
- outl(word,PCI_REG(SH7780_PCICR));
+ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
+ pci_write_reg(word, SH4_PCICR);
/* Wait for a long time... not 1 sec. but long enough */
mdelay(100);
- word = SH7780_PCICR_PREFIX;
- outl(word,PCI_REG(SH7780_PCICR));
+ word = SH4_PCICR_PREFIX;
+ pci_write_reg(word, SH4_PCICR);
}
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
* Mem space enable
*/
- outl(0x00000046, PCI_REG(SH7780_PCICMD));
+ pci_write_reg(0x00000046, SH7780_PCICMD);
/* define this host as the host bridge */
- word = SH7780_PCI_HOST_BRIDGE << 24;
- outl(word, PCI_REG(SH7780_PCIRID));
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pci_write_reg(word, SH7780_PCIRID);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
@@ -262,25 +100,26 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
* Window1 = map->window1.size @ cached area base = SDRAM
*/
word = ((map->window0.size - 1) & 0x1ff00001) | 0x01;
- outl(0x07f00001, PCI_REG(SH7780_PCILSR0));
+ pci_write_reg(0x07f00001, SH4_PCILSR0);
word = ((map->window1.size - 1) & 0x1ff00001) | 0x01;
- outl(0x00000001, PCI_REG(SH7780_PCILSR1));
+ pci_write_reg(0x00000001, SH4_PCILSR1);
/* Set the values on window 0 PCI config registers */
word = P2SEGADDR(map->window0.base);
- outl(0xa8000000, PCI_REG(SH7780_PCILAR0));
- outl(0x08000000, PCI_REG(SH7780_PCIMBAR0));
+ pci_write_reg(0xa8000000, SH4_PCILAR0);
+ pci_write_reg(0x08000000, SH7780_PCIMBAR0);
/* Set the values on window 1 PCI config registers */
word = P2SEGADDR(map->window1.base);
- outl(0x00000000, PCI_REG(SH7780_PCILAR1));
- outl(0x00000000, PCI_REG(SH7780_PCIMBAR1));
+ pci_write_reg(0x00000000, SH4_PCILAR1);
+ pci_write_reg(0x00000000, SH7780_PCIMBAR1);
/* Map IO space into PCI IO window
* The IO window is 64K-PCIBIOS_MIN_IO in size
* IO addresses will be translated to the
* PCI IO window base address
*/
- PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO,
- (64*1024), SH7780_PCI_IO_BASE+PCIBIOS_MIN_IO);
+ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
+ PCIBIOS_MIN_IO, (64 << 10),
+ SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
@@ -293,49 +132,8 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
- word = SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | /* SH7780_PCICR_ARBM |*/ SH7780_PCICR_FTO;
- outl(word, PCI_REG(SH7780_PCICR));
+ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
+ pci_write_reg(word, SH4_PCICR);
return 1;
}
-
-char * __init pcibios_setup(char *str)
-{
- if (!strcmp(str, "off")) {
- pci_probe = 0;
- return NULL;
- }
-
- return str;
-}
-
-/*
- * IRQ functions
- */
-static u8 __init sh7780_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
- /* no swizzling */
- return PCI_SLOT(dev->devfn);
-}
-
-static int sh7780_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- irq = pcibios_map_platform_irq(slot,pin);
- if( irq < 0 ) {
- pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(sh7780_no_swizzle, sh7780_pci_lookup_irq);
-}
-