aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc64/kernel
diff options
context:
space:
mode:
authorDavid S. Miller <davem@sunset.davemloft.net>2005-09-22 20:11:33 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2005-09-22 20:11:33 -0700
commitbff06d552240ba7f5b49482a4865871d7bc03dc2 (patch)
treeee760e252023bec338921296b12bb54987bedcac /arch/sparc64/kernel
parent40fd3533c93f0062b6d1d8540961ef70fc8ab750 (diff)
[SPARC64]: Rewrite bootup sequence.
Instead of all of this cpu-specific code to remap the kernel to the correct location, use portable firmware calls to do this instead. What we do now is the following in position independant assembler: chosen_node = prom_finddevice("/chosen"); prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu"); vaddr = 4MB_ALIGN(current_text_addr()); prom_translate(vaddr, &paddr_high, &paddr_low, &mode); prom_boot_mapping_mode = mode; prom_boot_mapping_phys_high = paddr_high; prom_boot_mapping_phys_low = paddr_low; prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low); and that replaces the massive amount of by-hand TLB probing and programming we used to do here. The new code should also handle properly the case where the kernel is mapped at the correct address already (think: future kexec support). Consequently, the bulk of remap_kernel() dies as does the entirety of arch/sparc64/prom/map.S We try to share some strings in the PROM library with the ones used at bootup, and while we're here mark input strings to oplib.h routines with "const" when appropriate. There are many more simplifications now possible. For one thing, we can consolidate the two copies we now have of a lot of cpu setup code sitting in head.S and trampoline.S. This is a significant step towards CONFIG_DEBUG_PAGEALLOC support. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/sparc64/kernel')
-rw-r--r--arch/sparc64/kernel/head.S549
-rw-r--r--arch/sparc64/kernel/setup.c15
-rw-r--r--arch/sparc64/kernel/trampoline.S16
3 files changed, 168 insertions, 412 deletions
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index dc3551f46b7..8b83520e427 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -80,15 +80,165 @@ sparc_ramdisk_image64:
.xword 0
.word _end
- /* We must be careful, 32-bit OpenBOOT will get confused if it
- * tries to save away a register window to a 64-bit kernel
- * stack address. Flush all windows, disable interrupts,
- * remap if necessary, jump onto kernel trap table, then kernel
- * stack, or else we die.
+ /* PROM cif handler code address is in %o4. */
+sparc64_boot:
+1: rd %pc, %g7
+ set 1b, %g1
+ cmp %g1, %g7
+ be,pn %xcc, sparc64_boot_after_remap
+ mov %o4, %l7
+
+ /* We need to remap the kernel. Use position independant
+ * code to remap us to KERNBASE.
*
- * PROM entry point is on %o4
+ * SILO can invoke us with 32-bit address masking enabled,
+ * so make sure that's clear.
*/
-sparc64_boot:
+ rdpr %pstate, %g1
+ andn %g1, PSTATE_AM, %g1
+ wrpr %g1, 0x0, %pstate
+ ba,a,pt %xcc, 1f
+
+ .globl prom_finddev_name, prom_chosen_path
+ .globl prom_getprop_name, prom_mmu_name
+ .globl prom_callmethod_name, prom_translate_name
+ .globl prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache
+ .globl prom_boot_mapped_pc, prom_boot_mapping_mode
+ .globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low
+prom_finddev_name:
+ .asciz "finddevice"
+prom_chosen_path:
+ .asciz "/chosen"
+prom_getprop_name:
+ .asciz "getprop"
+prom_mmu_name:
+ .asciz "mmu"
+prom_callmethod_name:
+ .asciz "call-method"
+prom_translate_name:
+ .asciz "translate"
+prom_map_name:
+ .asciz "map"
+prom_unmap_name:
+ .asciz "unmap"
+ .align 4
+prom_mmu_ihandle_cache:
+ .word 0
+prom_boot_mapped_pc:
+ .word 0
+prom_boot_mapping_mode:
+ .word 0
+ .align 8
+prom_boot_mapping_phys_high:
+ .xword 0
+prom_boot_mapping_phys_low:
+ .xword 0
+1:
+ rd %pc, %l0
+ mov (1b - prom_finddev_name), %l1
+ mov (1b - prom_chosen_path), %l2
+ mov (1b - prom_boot_mapped_pc), %l3
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ sub %l0, %l3, %l3
+ stw %l0, [%l3]
+ sub %sp, (192 + 128), %sp
+
+ /* chosen_node = prom_finddevice("/chosen") */
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "finddevice"
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 1
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
+ stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1, "/chosen"
+ stx %g0, [%sp + 2047 + 128 + 0x20] ! ret1
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ ldx [%sp + 2047 + 128 + 0x20], %l4 ! chosen device node
+
+ mov (1b - prom_getprop_name), %l1
+ mov (1b - prom_mmu_name), %l2
+ mov (1b - prom_mmu_ihandle_cache), %l5
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ sub %l0, %l5, %l5
+
+ /* prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu") */
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "getprop"
+ mov 4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 4
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
+ stx %l4, [%sp + 2047 + 128 + 0x18] ! arg1, chosen_node
+ stx %l2, [%sp + 2047 + 128 + 0x20] ! arg2, "mmu"
+ stx %l5, [%sp + 2047 + 128 + 0x28] ! arg3, &prom_mmu_ihandle_cache
+ mov 4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4, sizeof(arg3)
+ stx %g0, [%sp + 2047 + 128 + 0x38] ! ret1
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ mov (1b - prom_callmethod_name), %l1
+ mov (1b - prom_translate_name), %l2
+ sub %l0, %l1, %l1
+ sub %l0, %l2, %l2
+ lduw [%l5], %l5 ! prom_mmu_ihandle_cache
+
+ stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "call-method"
+ mov 3, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 3
+ mov 5, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5
+ stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate"
+ stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache
+ srlx %l0, 22, %l3
+ sllx %l3, 22, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC
+ stx %g0, [%sp + 2047 + 128 + 0x30] ! res1
+ stx %g0, [%sp + 2047 + 128 + 0x38] ! res2
+ stx %g0, [%sp + 2047 + 128 + 0x40] ! res3
+ stx %g0, [%sp + 2047 + 128 + 0x48] ! res4
+ stx %g0, [%sp + 2047 + 128 + 0x50] ! res5
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ ldx [%sp + 2047 + 128 + 0x40], %l1 ! translation mode
+ mov (1b - prom_boot_mapping_mode), %l4
+ sub %l0, %l4, %l4
+ stw %l1, [%l4]
+ mov (1b - prom_boot_mapping_phys_high), %l4
+ sub %l0, %l4, %l4
+ ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high
+ stx %l2, [%l4 + 0x0]
+ ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low
+ stx %l3, [%l4 + 0x8]
+
+ /* Leave service as-is, "call-method" */
+ mov 7, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 7
+ mov 1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 7
+ mov (1b - prom_map_name), %l3
+ sub %l0, %l3, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x18] ! arg1: "map"
+ /* Leave arg2 as-is, prom_mmu_ihandle_cache */
+ mov -1, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: mode (-1 default)
+ sethi %hi(8 * 1024 * 1024), %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: size (8MB)
+ sethi %hi(KERNBASE), %l3
+ stx %l3, [%sp + 2047 + 128 + 0x38] ! arg5: vaddr (KERNBASE)
+ stx %g0, [%sp + 2047 + 128 + 0x40] ! arg6: empty
+ mov (1b - prom_boot_mapping_phys_low), %l3
+ sub %l0, %l3, %l3
+ ldx [%l3], %l3
+ stx %l3, [%sp + 2047 + 128 + 0x48] ! arg7: phys addr
+ call %l7
+ add %sp, (2047 + 128), %o0 ! argument array
+
+ add %sp, (192 + 128), %sp
+
+sparc64_boot_after_remap:
BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot)
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot)
ba,pt %xcc, spitfire_boot
@@ -125,185 +275,7 @@ cheetah_generic_boot:
stxa %g0, [%g3] ASI_IMMU
membar #Sync
- wrpr %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
- wr %g0, 0, %fprs
-
- /* Just like for Spitfire, we probe itlb-2 for a mapping which
- * matches our current %pc. We take the physical address in
- * that mapping and use it to make our own.
- */
-
- /* %g5 holds the tlb data */
- sethi %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
- sllx %g5, 32, %g5
- or %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
- /* Put PADDR tlb data mask into %g3. */
- sethi %uhi(_PAGE_PADDR), %g3
- or %g3, %ulo(_PAGE_PADDR), %g3
- sllx %g3, 32, %g3
- sethi %hi(_PAGE_PADDR), %g7
- or %g7, %lo(_PAGE_PADDR), %g7
- or %g3, %g7, %g3
-
- set 2 << 16, %l0 /* TLB entry walker. */
- set 0x1fff, %l2 /* Page mask. */
- rd %pc, %l3
- andn %l3, %l2, %g2 /* vaddr comparator */
-
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g2
- be,pn %xcc, cheetah_got_tlbentry
- nop
- and %l0, (127 << 3), %g1
- cmp %g1, (127 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* Search the small TLB. OBP never maps us like that but
- * newer SILO can.
- */
- clr %l0
-
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g2
- be,pn %xcc, cheetah_got_tlbentry
- nop
- cmp %l0, (15 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* BUG() if we get here... */
- ta 0x5
-
-cheetah_got_tlbentry:
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g0
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g1
- membar #Sync
- and %g1, %g3, %g1
- set 0x5fff, %l0
- andn %g1, %l0, %g1
- or %g5, %g1, %g5
-
- /* Clear out any KERNBASE area entries. */
- set 2 << 16, %l0
- sethi %hi(KERNBASE), %g3
- sethi %hi(KERNBASE<<1), %g7
- mov TLB_TAG_ACCESS, %l7
-
- /* First, check ITLB */
-1: ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_IMMU
- membar #Sync
- stxa %g0, [%l0] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (127 << 3), %g1
- cmp %g1, (127 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* Next, check DTLB */
- set 2 << 16, %l0
-1: ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- membar #Sync
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (511 << 3), %g1
- cmp %g1, (511 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* On Cheetah+, have to check second DTLB. */
- BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,l0,2f)
- ba,pt %xcc, 9f
- nop
-
-2: set 3 << 16, %l0
-1: ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- membar #Sync
- andn %g1, %l2, %g1
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- membar #Sync
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
-2: and %l0, (511 << 3), %g1
- cmp %g1, (511 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
-9:
-
- /* Now lock the TTE we created into ITLB-0 and DTLB-0,
- * entry 15 (and maybe 14 too).
- */
- sethi %hi(KERNBASE), %g3
- set (0 << 16) | (15 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- membar #Sync
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- membar #Sync
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(_end), %g3 /* Check for bigkernel case */
- or %g3, %lo(_end), %g3
- srl %g3, 23, %g3 /* Check if _end > 8M */
- brz,pt %g3, 1f
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- sethi %hi(0x400000), %g3
- or %g3, %lo(0x400000), %g3
- add %g5, %g3, %g5 /* New tte data */
- andn %g5, (_PAGE_G), %g5
- sethi %hi(KERNBASE+0x400000), %g3
- or %g3, %lo(KERNBASE+0x400000), %g3
- set (0 << 16) | (14 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- membar #Sync
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- membar #Sync
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- ba,pt %xcc, 1f
- nop
-
-1: set sun4u_init, %g2
- jmpl %g2 + %g0, %g0
- nop
+ ba,a,pt %xcc, jump_to_sun4u_init
spitfire_boot:
/* Typically PROM has already enabled both MMU's and both on-chip
@@ -313,6 +285,7 @@ spitfire_boot:
stxa %g1, [%g0] ASI_LSU_CONTROL
membar #Sync
+jump_to_sun4u_init:
/*
* Make sure we are in privileged mode, have address masking,
* using the ordinary globals and have enabled floating
@@ -324,151 +297,6 @@ spitfire_boot:
wrpr %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
wr %g0, 0, %fprs
-spitfire_create_mappings:
- /* %g5 holds the tlb data */
- sethi %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
- sllx %g5, 32, %g5
- or %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
-
- /* Base of physical memory cannot reliably be assumed to be
- * at 0x0! Figure out where it happens to be. -DaveM
- */
-
- /* Put PADDR tlb data mask into %g3. */
- sethi %uhi(_PAGE_PADDR_SF), %g3
- or %g3, %ulo(_PAGE_PADDR_SF), %g3
- sllx %g3, 32, %g3
- sethi %hi(_PAGE_PADDR_SF), %g7
- or %g7, %lo(_PAGE_PADDR_SF), %g7
- or %g3, %g7, %g3
-
- /* Walk through entire ITLB, looking for entry which maps
- * our %pc currently, stick PADDR from there into %g5 tlb data.
- */
- clr %l0 /* TLB entry walker. */
- set 0x1fff, %l2 /* Page mask. */
- rd %pc, %l3
- andn %l3, %l2, %g2 /* vaddr comparator */
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g2
- be,a,pn %xcc, spitfire_got_tlbentry
- ldxa [%l0] ASI_ITLB_DATA_ACCESS, %g1
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- /* BUG() if we get here... */
- ta 0x5
-
-spitfire_got_tlbentry:
- /* Nops here again, perhaps Cheetah/Blackbird are better behaved... */
- nop
- nop
- nop
- and %g1, %g3, %g1 /* Mask to just get paddr bits. */
- set 0x5fff, %l3 /* Mask offset to get phys base. */
- andn %g1, %l3, %g1
-
- /* NOTE: We hold on to %g1 paddr base as we need it below to lock
- * NOTE: the PROM cif code into the TLB.
- */
-
- or %g5, %g1, %g5 /* Or it into TAG being built. */
-
- clr %l0 /* TLB entry walker. */
- sethi %hi(KERNBASE), %g3 /* 4M lower limit */
- sethi %hi(KERNBASE<<1), %g7 /* 8M upper limit */
- mov TLB_TAG_ACCESS, %l7
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_ITLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_IMMU
- stxa %g0, [%l0] ASI_ITLB_DATA_ACCESS
- membar #Sync
-2:
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- nop; nop; nop
-
- clr %l0 /* TLB entry walker. */
-1:
- /* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
- ldxa [%l0] ASI_DTLB_TAG_READ, %g1
- nop
- nop
- nop
- andn %g1, %l2, %g1 /* Get vaddr */
- cmp %g1, %g3
- blu,pn %xcc, 2f
- cmp %g1, %g7
- bgeu,pn %xcc, 2f
- nop
- stxa %g0, [%l7] ASI_DMMU
- stxa %g0, [%l0] ASI_DTLB_DATA_ACCESS
- membar #Sync
-2:
- cmp %l0, (63 << 3)
- blu,pt %xcc, 1b
- add %l0, (1 << 3), %l0
-
- nop; nop; nop
-
-
- /* PROM never puts any TLB entries into the MMU with the lock bit
- * set. So we gladly use tlb entry 63 for KERNBASE. And maybe 62 too.
- */
-
- sethi %hi(KERNBASE), %g3
- mov (63 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU /* KERNBASE into TLB TAG */
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS /* TTE into TLB DATA */
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU /* KERNBASE into TLB TAG */
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS /* TTE into TLB DATA */
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(_end), %g3 /* Check for bigkernel case */
- or %g3, %lo(_end), %g3
- srl %g3, 23, %g3 /* Check if _end > 8M */
- brz,pt %g3, 2f
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
- sethi %hi(0x400000), %g3
- or %g3, %lo(0x400000), %g3
- add %g5, %g3, %g5 /* New tte data */
- andn %g5, (_PAGE_G), %g5
- sethi %hi(KERNBASE+0x400000), %g3
- or %g3, %lo(KERNBASE+0x400000), %g3
- mov (62 << 3), %g7
- stxa %g3, [%l7] ASI_DMMU
- stxa %g5, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
- stxa %g3, [%l7] ASI_IMMU
- stxa %g5, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
- flush %g3
- membar #Sync
- sethi %hi(KERNBASE), %g3 /* Restore for fixup code below */
-2: ba,pt %xcc, 1f
- nop
-1:
set sun4u_init, %g2
jmpl %g2 + %g0, %g0
nop
@@ -483,38 +311,12 @@ sun4u_init:
stxa %g0, [%g7] ASI_DMMU
membar #Sync
- /* We are now safely (we hope) in Nucleus context (0), rewrite
- * the KERNBASE TTE's so they no longer have the global bit set.
- * Don't forget to setup TAG_ACCESS first 8-)
- */
- mov TLB_TAG_ACCESS, %g2
- stxa %g3, [%g2] ASI_IMMU
- stxa %g3, [%g2] ASI_DMMU
- membar #Sync
-
BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup)
ba,pt %xcc, spitfire_tlb_fixup
nop
cheetah_tlb_fixup:
- set (0 << 16) | (15 << 3), %g7
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g0
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g0
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
- /* Kill instruction prefetch queues. */
- flush %g3
- membar #Sync
-
mov 2, %g2 /* Set TLB type to cheetah+. */
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
@@ -551,21 +353,6 @@ cheetah_tlb_fixup:
nop
spitfire_tlb_fixup:
- mov (63 << 3), %g7
- ldxa [%g7] ASI_ITLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_ITLB_DATA_ACCESS
- membar #Sync
-
- ldxa [%g7] ASI_DTLB_DATA_ACCESS, %g1
- andn %g1, (_PAGE_G), %g1
- stxa %g1, [%g7] ASI_DTLB_DATA_ACCESS
- membar #Sync
-
- /* Kill instruction prefetch queues. */
- flush %g3
- membar #Sync
-
/* Set TLB type to spitfire. */
mov 0, %g2
sethi %hi(tlb_type), %g1
@@ -578,24 +365,6 @@ tlb_fixup_done:
mov %sp, %l6
mov %o4, %l7
-#if 0 /* We don't do it like this anymore, but for historical hack value
- * I leave this snippet here to show how crazy we can be sometimes. 8-)
- */
-
- /* Setup "Linux Current Register", thanks Sun 8-) */
- wr %g0, 0x1, %pcr
-
- /* Blackbird errata workaround. See commentary in
- * smp.c:smp_percpu_timer_interrupt() for more
- * information.
- */
- ba,pt %xcc, 99f
- nop
- .align 64
-99: wr %g6, %g0, %pic
- rd %pic, %g0
-#endif
-
wr %g0, ASI_P, %asi
mov 1, %g1
sllx %g1, THREAD_SHIFT, %g1
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index ddbed3341a2..0296cb00fc9 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -536,20 +536,7 @@ void __init setup_arch(char **cmdline_p)
}
pfn_base = phys_base >> PAGE_SHIFT;
- switch (tlb_type) {
- default:
- case spitfire:
- kern_base = spitfire_get_itlb_data(sparc64_highest_locked_tlbent());
- kern_base &= _PAGE_PADDR_SF;
- break;
-
- case cheetah:
- case cheetah_plus:
- kern_base = cheetah_get_litlb_data(sparc64_highest_locked_tlbent());
- kern_base &= _PAGE_PADDR;
- break;
- };
-
+ kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
if (!root_flags)
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 3a145fc39cf..89f2fcfcd66 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -119,8 +119,8 @@ startup_continue:
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -156,8 +156,8 @@ startup_continue:
sethi %hi(itlb_load), %g2
or %g2, %lo(itlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -190,8 +190,8 @@ do_dtlb:
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]
@@ -228,8 +228,8 @@ do_dtlb:
sethi %hi(dtlb_load), %g2
or %g2, %lo(dtlb_load), %g2
stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(mmu_ihandle_cache)], %g2
+ sethi %hi(prom_mmu_ihandle_cache), %g2
+ lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
sethi %hi(KERNBASE + 0x400000), %g2
stx %g2, [%sp + 2047 + 128 + 0x28]