Add power management devices.

9 files changed, 1042 insertions, 3 deletions

diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113a576..ebe0579c537 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,10 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C2442)	+= clock.o
 
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+	gta02-pm-bt.o \
+	gta02-pm-gps.o \
+	gta02-pm-gsm.o \
+	gta02-pm-wlan.o
 # Machine support
 
diff --git a/arch/arm/mach-s3c2442/gta02-pm-bt.c b/arch/arm/mach-s3c2442/gta02-pm-bt.c
new file mode 100644
index 00000000000..76671ce96d0
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-bt.c
@@ -0,0 +1,257 @@
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/err.h>
+#include <mach/gpio-fns.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+	struct regulator *regulator;
+	struct rfkill *rfkill;
+	int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	int ret = 0;
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+			ret = 1;
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+			ret = 1;
+	}
+
+	if (!ret) {
+		return strlcpy(buf, "0\n", 3);
+	} else {
+		return strlcpy(buf, "1\n", 3);
+	}
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+	bt_data = dev_get_drvdata(dev);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
+
+	if (on) {
+		if (!regulator_is_enabled(bt_data->regulator))
+			regulator_enable(bt_data->regulator);
+	} else {
+		if (regulator_is_enabled(bt_data->regulator))
+			regulator_disable(bt_data->regulator);
+	}
+
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+	struct device *dev = data;
+
+	__gta02_pm_bt_toggle_radio(dev, !blocked);
+
+	return 0;
+}
+
+static const struct rfkill_ops gta02_bt_rfkill_ops = {
+       .set_block = bt_rfkill_set_block,
+};
+
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
+
+		__gta02_pm_bt_toggle_radio(dev, on);
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		/* reset is low-active, so we need to invert */
+		s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+	dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+	bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+	__gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+	return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+	__gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+	return 0;
+}
+#else
+#define gta02_bt_suspend	NULL
+#define gta02_bt_resume		NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+	struct rfkill *rfkill;
+	struct regulator *regulator;
+	struct gta02_pm_bt_data *bt_data;
+	int ret;
+
+	dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+	bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+	dev_set_drvdata(&pdev->dev, bt_data);
+
+	regulator = regulator_get(&pdev->dev, "BT_3V2");
+	if (IS_ERR(regulator))
+		return -ENODEV;
+
+	bt_data->regulator = regulator;
+
+	/* this tests the true physical state of the regulator... */
+	if (regulator_is_enabled(regulator)) {
+		/*
+		 * but these only operate on the logical state of the
+		 * regulator... so we need to logicaly "adopt" it on
+		 * to turn it off
+		 */
+		regulator_enable(regulator);
+		regulator_disable(regulator);
+	}
+
+	/* we pull reset to low to make sure that the chip doesn't
+	 * drain power through the reset line */
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
+
+	rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+                            &gta02_bt_rfkill_ops, &pdev->dev);
+
+	if (!rfkill) {
+		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+		return -ENOMEM;
+	}
+
+    rfkill_init_sw_state(rfkill, 0);
+
+	ret = rfkill_register(rfkill);
+	if (ret) {
+		rfkill_destroy(rfkill);
+		dev_err(&pdev->dev, "Failed to register rfkill\n");
+		return ret;
+	}
+
+	bt_data->rfkill = rfkill;
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	struct regulator *regulator;
+
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+
+	if (bt_data->rfkill) {
+		rfkill_destroy(bt_data->rfkill);
+	}
+
+	if (!bt_data || !bt_data->regulator)
+		return 0;
+
+	regulator = bt_data->regulator;
+
+	/* Make sure regulator is disabled before calling regulator_put */
+	if (regulator_is_enabled(regulator))
+		regulator_disable(regulator);
+
+	regulator_put(regulator);
+
+	kfree(bt_data);
+
+	return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+	.probe		= gta02_bt_probe,
+	.remove		= gta02_bt_remove,
+	.suspend	= gta02_bt_suspend,
+	.resume		= gta02_bt_resume,
+	.driver		= {
+		.name		= "gta02-pm-bt",
+	},
+};
+
+static int __devinit gta02_bt_init(void)
+{
+	return platform_driver_register(&gta02_bt_driver);
+}
+module_init(gta02_bt_init);
+
+static void gta02_bt_exit(void)
+{
+	platform_driver_unregister(&gta02_bt_driver);
+}
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gps.c b/arch/arm/mach-s3c2442/gta02-pm-gps.c
new file mode 100644
index 00000000000..02be4cec851
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gps.c
@@ -0,0 +1,241 @@
+/*
+ * GPS Power Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007-2009 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+struct gta02_pm_gps_data {
+#ifdef CONFIG_PM
+	int keep_on_in_suspend;
+#endif
+	int power_was_on;
+	struct regulator *regulator;
+};
+
+static struct gta02_pm_gps_data gta02_gps;
+
+int gta02_pm_gps_is_on(void)
+{
+	return gta02_gps.power_was_on;
+}
+EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+
+/* This is the POWERON pin */
+static void gps_pwron_set(int on)
+{
+	if (on) {
+		/* return UART pins to being UART pins */
+		s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1);
+		/* remove pulldown now it won't be floating any more */
+		s3c2410_gpio_pullup(S3C2410_GPH(5), 0);
+
+		if (!gta02_gps.power_was_on)
+			regulator_enable(gta02_gps.regulator);
+	} else {
+		/*
+		 * take care not to power unpowered GPS from UART TX
+		 * return them to GPIO and force low
+		 */
+		s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+		/* don't let RX from unpowered GPS float */
+		s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+		if (gta02_gps.power_was_on)
+			regulator_disable(gta02_gps.regulator);
+	}
+}
+
+static int gps_pwron_get(void)
+{
+	return regulator_is_enabled(gta02_gps.regulator);
+}
+
+#ifdef CONFIG_PM
+/* This is the flag for keeping gps ON during suspend */
+static void gps_keep_on_in_suspend_set(int on)
+{
+	gta02_gps.keep_on_in_suspend = on;
+}
+
+static int gps_keep_on_in_suspend_get(void)
+{
+	return gta02_gps.keep_on_in_suspend;
+}
+#endif
+
+static ssize_t power_gps_read(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	int ret = 0;
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		ret = gps_pwron_get();
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		ret = gps_keep_on_in_suspend_get();
+#endif
+	}
+	if (ret)
+		return strlcpy(buf, "1\n", 3);
+	else
+		return strlcpy(buf, "0\n", 3);
+}
+
+static ssize_t power_gps_write(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		gps_pwron_set(on);
+		gta02_gps.power_was_on = !!on;
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		gps_keep_on_in_suspend_set(on);
+#endif
+	}
+	return count;
+}
+
+#ifdef CONFIG_PM
+static int gta02_pm_gps_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	if (!gta02_gps.keep_on_in_suspend ||
+		!gta02_gps.power_was_on)
+		gps_pwron_set(0);
+	else
+		dev_warn(&pdev->dev, "GTA02: keeping gps ON "
+			 "during suspend\n");
+	return 0;
+}
+
+static int gta02_pm_gps_resume(struct platform_device *pdev)
+{
+	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+		gps_pwron_set(1);
+
+	return 0;
+}
+
+static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
+#else
+#define gta02_pm_gps_suspend	NULL
+#define gta02_pm_gps_resume	NULL
+#endif
+
+static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
+
+static struct attribute *gta02_gps_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+#ifdef CONFIG_PM
+	&dev_attr_keep_on_in_suspend.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group gta02_gps_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gps_sysfs_entries,
+};
+
+static int __init gta02_pm_gps_probe(struct platform_device *pdev)
+{
+	gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
+	if (IS_ERR(gta02_gps.regulator)) {
+		dev_err(&pdev->dev, "probe failed %ld\n",
+			PTR_ERR(gta02_gps.regulator));
+
+		return PTR_ERR(gta02_gps.regulator);
+	}
+
+	dev_info(&pdev->dev, "starting\n");
+
+	/*
+	 * Here we should call the code that handles the set GPS power
+	 * off action.  But, the regulator API does not allow us to
+	 * reassert regulator state, and when we read the regulator API
+	 * logical state, it can differ from the actual state,  So
+	 * a workaround for this is to just set the regulator off in the
+	 * PMU directly.  Because that's different from normal flow, we
+	 * have to reproduce other things from the OFF action here too.
+	 */
+
+	/*
+	 * u-boot enables LDO5 (GPS), which doesn't make sense and
+	 * causes confusion. We therefore disable the regulator here.
+	 */
+	pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
+
+	/*
+	 * take care not to power unpowered GPS from UART TX
+	 * return them to GPIO and force low
+	 */
+	s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+	/* don't let RX from unpowered GPS float */
+	s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+
+	return sysfs_create_group(&pdev->dev.kobj,
+				  &gta02_gps_attr_group);
+}
+
+static int gta02_pm_gps_remove(struct platform_device *pdev)
+{
+	regulator_put(gta02_gps.regulator);
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
+	return 0;
+}
+
+static struct platform_driver gta02_pm_gps_driver = {
+	.probe		= gta02_pm_gps_probe,
+	.remove		= gta02_pm_gps_remove,
+	.suspend	= gta02_pm_gps_suspend,
+	.resume		= gta02_pm_gps_resume,
+	.driver		= {
+		.name		= "gta02-pm-gps",
+	},
+};
+
+static int __devinit gta02_pm_gps_init(void)
+{
+	return platform_driver_register(&gta02_pm_gps_driver);
+}
+module_init(gta02_pm_gps_init);
+
+static void gta02_pm_gps_exit(void)
+{
+	platform_driver_unregister(&gta02_pm_gps_driver);
+}
+module_exit(gta02_pm_gps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
new file mode 100644
index 00000000000..bef8468dafe
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
@@ -0,0 +1,300 @@
+/*
+ * GSM Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+/* FIXME: Add interrupt handler counting irqs or something */
+static int gta_gsm_interrupts;
+
+extern void s3c24xx_serial_console_set_silence(int);
+
+struct gta02pm_priv {
+	int gpio_ndl_gsm;
+	struct console *con;
+};
+
+static struct gta02pm_priv gta02_gsm;
+
+static struct console *find_s3c24xx_console(void)
+{
+	struct console *con;
+
+	acquire_console_sem();
+
+	for (con = console_drivers; con; con = con->next) {
+		if (!strcmp(con->name, "ttySAC"))
+			break;
+	}
+
+	release_console_sem();
+
+	return con;
+}
+
+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "download")) {
+		if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT)
+			goto out_1;
+	}
+
+	return strlcpy(buf, "0\n", 3);
+out_1:
+	return strlcpy(buf, "1\n", 3);
+}
+
+static void gsm_on_off(struct device *dev, int on)
+{
+	if (!on) {
+		s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT);
+
+		pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
+
+		if (gta02_gsm.con) {
+			s3c24xx_serial_console_set_silence(0);
+			console_start(gta02_gsm.con);
+
+			dev_dbg(dev, "powered down gta02 GSM, enabling "
+					"serial console\n");
+		}
+
+		return;
+	}
+
+	if (gta02_gsm.con) {
+		dev_dbg(dev, "powering up GSM, thus "
+				"disconnecting serial console\n");
+
+		console_stop(gta02_gsm.con);
+		s3c24xx_serial_console_set_silence(1);
+	}
+
+	/* allow UART to talk to GSM side now we will power it */
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+
+	pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
+
+	msleep(100);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1);
+	msleep(500);
+	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0);
+
+	/*
+	 * workaround for calypso firmware moko10 and earlier,
+	 * without this it will leave IRQ line high after
+	 * booting
+	 */
+	s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	msleep(1000);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+
+}
+
+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		gsm_on_off(dev, on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "download")) {
+		/*
+		 * the keyboard / buttons driver requests and enables
+		 * the JACK_INSERT IRQ.  We have to take care about
+		 * not enabling and disabling the IRQ when it was
+		 * already in that state or we get "unblanaced IRQ"
+		 * kernel warnings and stack dumps.  So we use the
+		 * copy of the ndl_gsm state to figure out if we should
+		 * enable or disable the jack interrupt
+		 */
+		if (on) {
+			if (gta02_gsm.gpio_ndl_gsm)
+				disable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		} else {
+			if (!gta02_gsm.gpio_ndl_gsm)
+				enable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		}
+
+		gta02_gsm.gpio_ndl_gsm = !on;
+		s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (on) {
+			gta_gsm_interrupts = 0;
+			s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+			s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+		} else
+			s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
+
+#ifdef CONFIG_PM
+
+static int gta02_gsm_resume(struct platform_device *pdev);
+static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	/* If flowcontrol asserted, abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			goto busy;
+	}
+
+	/* disable DL GSM to prevent jack_insert becoming 'floating' */
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+	return 0;
+
+busy:
+	return -EBUSY;
+}
+
+static int
+gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
+{
+	/* Last chance: abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			return -EBUSY;
+	}
+	return 0;
+}
+
+static int gta02_gsm_resume(struct platform_device *pdev)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	/* Make sure that the kernel console on the serial port is still
+	 * disabled. FIXME: resume ordering race with serial driver! */
+	if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON))
+		console_stop(gta02_gsm.con);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
+
+	return 0;
+}
+#else
+#define gta02_gsm_suspend	NULL
+#define gta02_gsm_suspend_late	NULL
+#define gta02_gsm_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct attribute *gta02_gsm_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_download.attr,
+	&dev_attr_flowcontrolled.attr,
+	NULL
+};
+
+static struct attribute_group gta02_gsm_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gsm_sysfs_entries,
+};
+
+static int __init gta02_gsm_probe(struct platform_device *pdev)
+{
+	gta02_gsm.con = find_s3c24xx_console();
+	if (!gta02_gsm.con)
+		dev_warn(&pdev->dev,
+			 "cannot find S3C24xx console driver\n");
+
+	/* note that download initially disabled, and enforce that */
+	gta02_gsm.gpio_ndl_gsm = 1;
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+
+	/* GSM is to be initially off (at boot, or if this module inserted) */
+	gsm_on_off(&pdev->dev, 0);
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+}
+
+static int gta02_gsm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver gta02_gsm_driver = {
+	.probe		= gta02_gsm_probe,
+	.remove		= gta02_gsm_remove,
+	.suspend	= gta02_gsm_suspend,
+	.suspend_late	= gta02_gsm_suspend_late,
+	.resume		= gta02_gsm_resume,
+	.driver		= {
+		.name		= "gta02-pm-gsm",
+	},
+};
+
+static int __devinit gta02_gsm_init(void)
+{
+	return platform_driver_register(&gta02_gsm_driver);
+}
+module_init(gta02_gsm_init);
+
+static void gta02_gsm_exit(void)
+{
+	platform_driver_unregister(&gta02_gsm_driver);
+}
+module_exit(gta02_gsm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
new file mode 100644
index 00000000000..6e0226600b1
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
@@ -0,0 +1,201 @@
+/*
+ * GTA02 WLAN power management
+ *
+ * (C) 2008, 2009 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <mach/gta02-pm-wlan.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gpio-fns.h>
+
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+
+/* ----- Module hardware reset ("power") ----------------------------------- */
+
+
+void gta02_wlan_reset(int assert_reset)
+{
+	if (assert_reset) {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
+		msleep(200); /* probably excessive but we don't have specs */
+	} else {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
+	}
+}
+
+/* ----- rfkill ------------------------------------------------------------ */
+
+/*
+ * S3C MCI handles suspend/resume through device removal/insertion. In order to
+ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
+ * we therefore need to maintain rfkill state outside the driver.
+ *
+ * This platform driver is as good a place as any other.
+ */
+
+static int (*gta02_wlan_rfkill_cb)(void *user, int on);
+static void *gta02_wlan_rfkill_user;
+static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
+static int gta02_wlan_rfkill_on;
+
+/*
+ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
+ * driver is ready to process rfkill callbacks. To prevent the state from
+ * changing until the driver has completed its initialization, we grab and hold
+ * the rfkill lock.
+ *
+ * A call to gta02_wlan_query_rfkill_lock must be followed by either
+ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
+ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
+ */
+
+int gta02_wlan_query_rfkill_lock(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	return gta02_wlan_rfkill_on;
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
+
+void gta02_wlan_query_rfkill_unlock(void)
+{
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
+
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
+{
+	BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = cb;
+	gta02_wlan_rfkill_user = user;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
+
+void gta02_wlan_clear_rfkill_cb(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	BUG_ON(!gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = NULL;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
+
+static int gta02_wlan_set_radio_block(void *data, bool blocked)
+{
+	struct device *dev = data;
+	int res = 0;
+
+	dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n",
+	    blocked, gta02_wlan_rfkill_cb);
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	if (gta02_wlan_rfkill_cb)
+		res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked);
+	if (!res)
+		gta02_wlan_rfkill_on = !blocked;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+	return res;
+}
+
+static const struct rfkill_ops gta02_wlan_rfkill_ops = {
+       .set_block = gta02_wlan_set_radio_block,
+};
+
+/* ----- Initialization/removal -------------------------------------------- */
+
+
+static int __init gta02_wlan_probe(struct platform_device *pdev)
+{
+	/* default-on for now */
+	const int default_state = 1;
+	struct rfkill *rfkill;
+	int ret;
+
+	dev_info(&pdev->dev, "starting\n");
+
+	s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
+	gta02_wlan_reset(1);
+	gta02_wlan_reset(0);
+
+	rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN,
+							&gta02_wlan_rfkill_ops, &pdev->dev);
+
+
+	if (!rfkill) {
+		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+		return -ENOMEM;
+	}
+	
+	rfkill_init_sw_state(rfkill, default_state);
+	/*
+	 * If the WLAN driver somehow managed to get activated before we're
+	 * ready, the driver is now in an unknown state, which isn't something
+	 * we're prepared to handle. This can't happen, so just fail hard.
+	 */
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_on = default_state;
+
+	ret = rfkill_register(rfkill);
+	if (ret) {
+		rfkill_destroy(rfkill);
+		dev_err(&pdev->dev, "Failed to register rfkill\n");
+		return ret;
+	}
+
+	dev_set_drvdata(&pdev->dev, rfkill);
+
+	return 0;
+}
+
+static int gta02_wlan_remove(struct platform_device *pdev)
+{
+	struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
+
+	rfkill_destroy(rfkill);
+
+	return 0;
+}
+
+static struct platform_driver gta02_wlan_driver = {
+	.probe		= gta02_wlan_probe,
+	.remove		= gta02_wlan_remove,
+	.driver		= {
+		.name		= "gta02-pm-wlan",
+	},
+};
+
+static int __devinit gta02_wlan_init(void)
+{
+	return platform_driver_register(&gta02_wlan_driver);
+}
+module_init(gta02_wlan_init);
+
+static void gta02_wlan_exit(void)
+{
+	platform_driver_unregister(&gta02_wlan_driver);
+}
+module_exit(gta02_wlan_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
new file mode 100644
index 00000000000..f15180ac079
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
@@ -0,0 +1 @@
+extern int gta02_pm_gps_is_on(void);
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
new file mode 100644
index 00000000000..48369789709
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_GTA02_PM_WLAN_H
+#define __MACH_GTA02_PM_WLAN_H
+
+void gta02_wlan_reset(int assert_reset);
+int gta02_wlan_query_rfkill_lock(void);
+void gta02_wlan_query_rfkill_unlock(void);
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
+void gta02_wlan_clear_rfkill_cb(void);
+
+#endif /* __MACH_GTA02_PM_WLAN_H */
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
index 953331d8d56..69bc62de693 100644
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -81,4 +81,6 @@
 
 int gta02_get_pcb_revision(void);
 
+extern struct pcf50633 *gta02_pcf;
+
 #endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index baba72ec193..b311974a26d 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -58,6 +58,7 @@
 #include <linux/mfd/pcf50633/gpio.h>
 #include <linux/mfd/pcf50633/pmic.h>
 
+#include <linux/input.h>
 #include <linux/gpio_keys.h>
 
 #include <linux/leds.h>
@@ -92,7 +93,10 @@
 #include <plat/gpio-core.h>
 #include <plat/iic.h>
 
-static struct pcf50633 *gta02_pcf;
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+struct pcf50633 *gta02_pcf;
 
 /*
  * This gets called every 1ms when we paniced.
@@ -615,6 +619,22 @@ static struct platform_device gta02_leds_device = {
 	},
 };
 
+static struct platform_device gta02_pm_gps_dev = {
+	.name = "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+	.name = "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+	.name = "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+	.name = "gta02-pm-wlan",
+};
+
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
@@ -637,6 +657,10 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&gta02_buttons_device,
 	&gta02_leds_device,
+	&gta02_pm_gps_dev,
+	&gta02_pm_bt_dev,
+	&gta02_pm_gsm_dev,
+	&gta02_pm_wlan_dev,
 };
 
 /* These guys DO need to be children of PMU. */