[ACPI] ACPICA 20060113

Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 23 insertions, 36 deletions

diff --git a/drivers/acpi/executer/exoparg1.c b/drivers/acpi/executer/exoparg1.c
index 97e34542f5e..bc8837ecb71 100644
--- a/drivers/acpi/executer/exoparg1.c
+++ b/drivers/acpi/executer/exoparg1.c
@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -111,7 +111,8 @@ acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state)
 
 	default:		/*  Unknown opcode  */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		break;
 	}
@@ -188,7 +189,8 @@ acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state)
 
 	default:		/*  Unknown opcode  */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		break;
 	}
@@ -227,7 +229,8 @@ acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state)
 
 	default:		/* Unknown opcode */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -346,9 +349,7 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 				/* Check the range of the digit */
 
 				if (temp32 > 9) {
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "BCD digit too large (not decimal): 0x%X\n",
-							  temp32));
+					ACPI_REPORT_ERROR(("BCD digit too large (not decimal): 0x%X\n", temp32));
 
 					status = AE_AML_NUMERIC_OVERFLOW;
 					goto cleanup;
@@ -393,12 +394,7 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 			/* Overflow if there is any data left in Digit */
 
 			if (digit > 0) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Integer too large to convert to BCD: %8.8X%8.8X\n",
-						  ACPI_FORMAT_UINT64(operand
-								     [0]->
-								     integer.
-								     value)));
+				ACPI_REPORT_ERROR(("Integer too large to convert to BCD: %8.8X%8.8X\n", ACPI_FORMAT_UINT64(operand[0]->integer.value)));
 				status = AE_AML_NUMERIC_OVERFLOW;
 				goto cleanup;
 			}
@@ -525,15 +521,16 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
 
 		/* These are two obsolete opcodes */
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%s is obsolete and not implemented\n",
-				  acpi_ps_get_opcode_name(walk_state->opcode)));
+		ACPI_REPORT_ERROR(("%s is obsolete and not implemented\n",
+				   acpi_ps_get_opcode_name(walk_state->
+							   opcode)));
 		status = AE_SUPPORT;
 		goto cleanup;
 
 	default:		/* Unknown opcode */
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -639,11 +636,10 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 		    acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
 					     walk_state);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "%s: bad operand(s) %s\n",
-					  acpi_ps_get_opcode_name(walk_state->
-								  opcode),
-					  acpi_format_exception(status)));
+			ACPI_REPORT_ERROR(("%s: bad operand(s) %s\n",
+					   acpi_ps_get_opcode_name(walk_state->
+								   opcode),
+					   acpi_format_exception(status)));
 
 			goto cleanup;
 		}
@@ -742,9 +738,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 			break;
 
 		default:
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
-					  acpi_ut_get_type_name(type)));
+			ACPI_REPORT_ERROR(("Operand is not Buf/Int/Str/Pkg - found type %s\n", acpi_ut_get_type_name(type)));
 			status = AE_AML_OPERAND_TYPE;
 			goto cleanup;
 		}
@@ -941,11 +935,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 
 				default:
 
-					ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-							  "Unknown Index target_type %X in obj %p\n",
-							  operand[0]->reference.
-							  target_type,
-							  operand[0]));
+					ACPI_REPORT_ERROR(("Unknown Index target_type %X in obj %p\n", operand[0]->reference.target_type, operand[0]));
 					status = AE_AML_OPERAND_TYPE;
 					goto cleanup;
 				}
@@ -971,11 +961,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 				break;
 
 			default:
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Unknown opcode in ref(%p) - %X\n",
-						  operand[0],
-						  operand[0]->reference.
-						  opcode));
+				ACPI_REPORT_ERROR(("Unknown opcode in ref(%p) - %X\n", operand[0], operand[0]->reference.opcode));
 
 				status = AE_TYPE;
 				goto cleanup;
@@ -985,7 +971,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}