[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 464 insertions, 470 deletions

diff --git a/drivers/char/rio/riowinif.h b/drivers/char/rio/riowinif.h
index 18a4f147edc..f802d7593b8 100644
--- a/drivers/char/rio/riowinif.h
+++ b/drivers/char/rio/riowinif.h
@@ -40,7 +40,7 @@
 
 */
 
-#ifndef	_riowinif_h				/* If RIOWINDIF.H not already defined */
+#ifndef	_riowinif_h		/* If RIOWINDIF.H not already defined */
 #define	_riowinif_h    1
 
 /*****************************************************************************
@@ -60,42 +60,41 @@
 /* The PARM_MAP structure defines global values relating to the Host Card / RTA
    and is the main structure from which all other structures are referenced. */
 
-typedef	struct	_PARM_MAP
-{
-	_u16	phb_ptr;		/* 0x00 Pointer to the PHB array */
-	_u16	phb_num_ptr;		/* 0x02 Ptr to Number of PHB's */
-	_u16	free_list;		/* 0x04 Free List pointer */
-	_u16	free_list_end;		/* 0x06 Free List End pointer */
-	_u16	q_free_list_ptr;	/* 0x08 Ptr to Q_BUF variable */
-	_u16	unit_id_ptr;		/* 0x0A Unit Id */
-	_u16	link_str_ptr;		/* 0x0C Link Structure Array */
-	_u16	bootloader_1;		/* 0x0E 1st Stage Boot Loader */
-	_u16	bootloader_2;		/* 0x10 2nd Stage Boot Loader */
-	_u16	port_route_map_ptr;	/* 0x12 Port Route Map */
-	_u16	route_ptr;		/* 0x14 Route Map */
-	_u16	map_present;		/* 0x16 Route Map present */
-	_u16	pkt_num;		/* 0x18 Total number of packets */
-	_u16	q_num;			/* 0x1A Total number of Q packets */
-	_u16	buffers_per_port;	/* 0x1C Number of buffers per port */
-	_u16	heap_size;		/* 0x1E Initial size of heap */
-	_u16	heap_left;		/* 0x20 Current Heap left */
-	_u16	error;			/* 0x22 Error code */
-	_u16	tx_max;			/* 0x24 Max number of tx pkts per phb */
-	_u16	rx_max;			/* 0x26 Max number of rx pkts per phb */
-	_u16	rx_limit;		/* 0x28 For high / low watermarks */
-	_u16	links;			/* 0x2A Links to use */
-	_u16	timer;			/* 0x2C Interrupts per second */
-	_u16	rups;			/* 0x2E Pointer to the RUPs */
-	_u16	max_phb;		/* 0x30 Mostly for debugging */
-	_u16	living;			/* 0x32 Just increments!! */
-	_u16	init_done;		/* 0x34 Initialisation over */
-	_u16	booting_link;		/* 0x36 */
-	_u16	idle_count;		/* 0x38 Idle time counter */
-	_u16	busy_count;		/* 0x3A Busy counter */
-	_u16	idle_control;		/* 0x3C Control Idle Process */
-	_u16	tx_intr;		/* 0x3E TX interrupt pending */
-	_u16	rx_intr;		/* 0x40 RX interrupt pending */
-	_u16	rup_intr;		/* 0x42 RUP interrupt pending */
+typedef struct _PARM_MAP {
+	_u16 phb_ptr;		/* 0x00 Pointer to the PHB array */
+	_u16 phb_num_ptr;	/* 0x02 Ptr to Number of PHB's */
+	_u16 free_list;		/* 0x04 Free List pointer */
+	_u16 free_list_end;	/* 0x06 Free List End pointer */
+	_u16 q_free_list_ptr;	/* 0x08 Ptr to Q_BUF variable */
+	_u16 unit_id_ptr;	/* 0x0A Unit Id */
+	_u16 link_str_ptr;	/* 0x0C Link Structure Array */
+	_u16 bootloader_1;	/* 0x0E 1st Stage Boot Loader */
+	_u16 bootloader_2;	/* 0x10 2nd Stage Boot Loader */
+	_u16 port_route_map_ptr;	/* 0x12 Port Route Map */
+	_u16 route_ptr;		/* 0x14 Route Map */
+	_u16 map_present;	/* 0x16 Route Map present */
+	_u16 pkt_num;		/* 0x18 Total number of packets */
+	_u16 q_num;		/* 0x1A Total number of Q packets */
+	_u16 buffers_per_port;	/* 0x1C Number of buffers per port */
+	_u16 heap_size;		/* 0x1E Initial size of heap */
+	_u16 heap_left;		/* 0x20 Current Heap left */
+	_u16 error;		/* 0x22 Error code */
+	_u16 tx_max;		/* 0x24 Max number of tx pkts per phb */
+	_u16 rx_max;		/* 0x26 Max number of rx pkts per phb */
+	_u16 rx_limit;		/* 0x28 For high / low watermarks */
+	_u16 links;		/* 0x2A Links to use */
+	_u16 timer;		/* 0x2C Interrupts per second */
+	_u16 rups;		/* 0x2E Pointer to the RUPs */
+	_u16 max_phb;		/* 0x30 Mostly for debugging */
+	_u16 living;		/* 0x32 Just increments!! */
+	_u16 init_done;		/* 0x34 Initialisation over */
+	_u16 booting_link;	/* 0x36 */
+	_u16 idle_count;	/* 0x38 Idle time counter */
+	_u16 busy_count;	/* 0x3A Busy counter */
+	_u16 idle_control;	/* 0x3C Control Idle Process */
+	_u16 tx_intr;		/* 0x3E TX interrupt pending */
+	_u16 rx_intr;		/* 0x40 RX interrupt pending */
+	_u16 rup_intr;		/* 0x42 RUP interrupt pending */
 
 } PARM_MAP;
 
@@ -184,45 +183,44 @@ typedef	struct	_PARM_MAP
    attached to the system and there is normally an array of MAX_RUPS (=16) structures
    in a host card, defined by PARM_MAP->rup. */
 
-typedef	struct	_RUP
-{
-	_u16		txpkt;			/* 0x00 Outgoing packet */
-	_u16		rxpkt;			/* 0x02 ncoming packet */
-	_u16		link;			/* 0x04 Which link to send packet down ? */
-	_u8		rup_dest_unit[2];	/* 0x06 Destination Unit */
-	_u16		handshake;		/* 0x08 Handshaking */
-	_u16		timeout;		/* 0x0A Timeout */
-	_u16		status;			/* 0x0C Status */
-	_u16		txcontrol;		/* 0x0E Transmit control */
-	_u16		rxcontrol;		/* 0x10 Receive control */
+typedef struct _RUP {
+	_u16 txpkt;		/* 0x00 Outgoing packet */
+	_u16 rxpkt;		/* 0x02 ncoming packet */
+	_u16 link;		/* 0x04 Which link to send packet down ? */
+	_u8 rup_dest_unit[2];	/* 0x06 Destination Unit */
+	_u16 handshake;		/* 0x08 Handshaking */
+	_u16 timeout;		/* 0x0A Timeout */
+	_u16 status;		/* 0x0C Status */
+	_u16 txcontrol;		/* 0x0E Transmit control */
+	_u16 rxcontrol;		/* 0x10 Receive control */
 
 } RUP;
 
 /* Same thing again, but defined as offsets... */
 
-#define	RUP_txpkt		0x00		/* 0x00 Outgoing packet */
-#define	RUP_rxpkt		0x02		/* 0x02 Incoming packet */
-#define	RUP_link		0x04		/* 0x04 Which link to send packet down ? */
-#define	RUP_rup_dest_unit	0x06		/* 0x06 Destination Unit */
-#define	RUP_handshake		0x08		/* 0x08 Handshaking */
-#define	RUP_timeout		0x0A		/* 0x0A Timeout */
-#define	RUP_status		0x0C		/* 0x0C Status */
-#define	RUP_txcontrol		0x0E		/* 0x0E Transmit control */
-#define	RUP_rxcontrol		0x10		/* 0x10 Receive control */
-#define	sizeof_RUP		0x12		/* structure size = 0x12 */
+#define	RUP_txpkt		0x00	/* 0x00 Outgoing packet */
+#define	RUP_rxpkt		0x02	/* 0x02 Incoming packet */
+#define	RUP_link		0x04	/* 0x04 Which link to send packet down ? */
+#define	RUP_rup_dest_unit	0x06	/* 0x06 Destination Unit */
+#define	RUP_handshake		0x08	/* 0x08 Handshaking */
+#define	RUP_timeout		0x0A	/* 0x0A Timeout */
+#define	RUP_status		0x0C	/* 0x0C Status */
+#define	RUP_txcontrol		0x0E	/* 0x0E Transmit control */
+#define	RUP_rxcontrol		0x10	/* 0x10 Receive control */
+#define	sizeof_RUP		0x12	/* structure size = 0x12 */
 
 #define MAX_RUP			16
 
 /* RUP.txcontrol definitions... */
-#define	TX_RUP_INACTIVE		0		/* Nothing to transmit */
-#define	TX_PACKET_READY		1		/* Transmit packet ready */
-#define	TX_LOCK_RUP		2		/* Transmit side locked */
+#define	TX_RUP_INACTIVE		0	/* Nothing to transmit */
+#define	TX_PACKET_READY		1	/* Transmit packet ready */
+#define	TX_LOCK_RUP		2	/* Transmit side locked */
 
 /* RUP.txcontrol definitions... */
-#define	RX_RUP_INACTIVE		0		/* Nothing received */
-#define	RX_PACKET_READY		1		/* Packet received */
+#define	RX_RUP_INACTIVE		0	/* Nothing received */
+#define	RX_PACKET_READY		1	/* Packet received */
 
-#define	RUP_NO_OWNER		0xFF		/* RUP not owned by any process */
+#define	RUP_NO_OWNER		0xFF	/* RUP not owned by any process */
 
 /*****************************************************************************
 **********************************         ***********************************
@@ -234,52 +232,51 @@ typedef	struct	_RUP
    to the system and there is normally an array of MAX_PHBS (=128) structures
    in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */
 
-typedef	struct	_PHB
-{
-	_u16		source;			/* 0x00 Location of the PHB in the host card */
-	_u16		handshake;		/* 0x02 Used to manage receive packet flow control */
-	_u16		status;			/* 0x04 Internal port transmit/receive status */
-	_u16		timeout;		/* 0x06 Time period to wait for an ACK */
-	_u16		link;			/* 0x08 The host link associated with the PHB */
-	_u16		destination;		/* 0x0A Location of the remote port on the network */
-
-	_u16		tx_start;		/* 0x0C first entry in the packet array for transmit packets */
-	_u16		tx_end;			/* 0x0E last entry in the packet array for transmit packets */
-	_u16		tx_add;			/* 0x10 position in the packet array for new transmit packets */
-	_u16		tx_remove;		/* 0x12 current position in the packet pointer array */
-
-	_u16		rx_start;		/* 0x14 first entry in the packet array for receive packets */
-	_u16		rx_end;			/* 0x16 last entry in the packet array for receive packets */
-	_u16		rx_add;			/* 0x18 position in the packet array for new receive packets */
-	_u16		rx_remove;		/* 0x1A current position in the packet pointer array */
+typedef struct _PHB {
+	_u16 source;		/* 0x00 Location of the PHB in the host card */
+	_u16 handshake;		/* 0x02 Used to manage receive packet flow control */
+	_u16 status;		/* 0x04 Internal port transmit/receive status */
+	_u16 timeout;		/* 0x06 Time period to wait for an ACK */
+	_u16 link;		/* 0x08 The host link associated with the PHB */
+	_u16 destination;	/* 0x0A Location of the remote port on the network */
+
+	_u16 tx_start;		/* 0x0C first entry in the packet array for transmit packets */
+	_u16 tx_end;		/* 0x0E last entry in the packet array for transmit packets */
+	_u16 tx_add;		/* 0x10 position in the packet array for new transmit packets */
+	_u16 tx_remove;		/* 0x12 current position in the packet pointer array */
+
+	_u16 rx_start;		/* 0x14 first entry in the packet array for receive packets */
+	_u16 rx_end;		/* 0x16 last entry in the packet array for receive packets */
+	_u16 rx_add;		/* 0x18 position in the packet array for new receive packets */
+	_u16 rx_remove;		/* 0x1A current position in the packet pointer array */
 
 } PHB;
 
 /* Same thing again, but defined as offsets... */
 
-#define	PHB_source		0x00		/* 0x00 Location of the PHB in the host card */
-#define	PHB_handshake		0x02		/* 0x02 Used to manage receive packet flow control */
-#define	PHB_status		0x04		/* 0x04 Internal port transmit/receive status */
-#define	PHB_timeout		0x06		/* 0x06 Time period to wait for an ACK */
-#define	PHB_link		0x08		/* 0x08 The host link associated with the PHB */
-#define	PHB_destination		0x0A		/* 0x0A Location of the remote port on the network */
-#define	PHB_tx_start		0x0C		/* 0x0C first entry in the packet array for transmit packets */
-#define	PHB_tx_end		0x0E		/* 0x0E last entry in the packet array for transmit packets */
-#define	PHB_tx_add		0x10		/* 0x10 position in the packet array for new transmit packets */
-#define	PHB_tx_remove		0x12		/* 0x12 current position in the packet pointer array */
-#define	PHB_rx_start		0x14		/* 0x14 first entry in the packet array for receive packets */
-#define	PHB_rx_end		0x16		/* 0x16 last entry in the packet array for receive packets */
-#define	PHB_rx_add		0x18		/* 0x18 position in the packet array for new receive packets */
-#define	PHB_rx_remove		0x1A		/* 0x1A current position in the packet pointer array */
-#define	sizeof_PHB		0x1C		/* structure size = 0x1C */
+#define	PHB_source		0x00	/* 0x00 Location of the PHB in the host card */
+#define	PHB_handshake		0x02	/* 0x02 Used to manage receive packet flow control */
+#define	PHB_status		0x04	/* 0x04 Internal port transmit/receive status */
+#define	PHB_timeout		0x06	/* 0x06 Time period to wait for an ACK */
+#define	PHB_link		0x08	/* 0x08 The host link associated with the PHB */
+#define	PHB_destination		0x0A	/* 0x0A Location of the remote port on the network */
+#define	PHB_tx_start		0x0C	/* 0x0C first entry in the packet array for transmit packets */
+#define	PHB_tx_end		0x0E	/* 0x0E last entry in the packet array for transmit packets */
+#define	PHB_tx_add		0x10	/* 0x10 position in the packet array for new transmit packets */
+#define	PHB_tx_remove		0x12	/* 0x12 current position in the packet pointer array */
+#define	PHB_rx_start		0x14	/* 0x14 first entry in the packet array for receive packets */
+#define	PHB_rx_end		0x16	/* 0x16 last entry in the packet array for receive packets */
+#define	PHB_rx_add		0x18	/* 0x18 position in the packet array for new receive packets */
+#define	PHB_rx_remove		0x1A	/* 0x1A current position in the packet pointer array */
+#define	sizeof_PHB		0x1C	/* structure size = 0x1C */
 
 /* PHB.handshake definitions... */
-#define	PHB_HANDSHAKE_SET	0x0001		/* Set by LRT */
-#define	PHB_HANDSHAKE_RESET	0x0002		/* Set by ISR / driver */
+#define	PHB_HANDSHAKE_SET	0x0001	/* Set by LRT */
+#define	PHB_HANDSHAKE_RESET	0x0002	/* Set by ISR / driver */
 #define	PHB_HANDSHAKE_FLAGS	(PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET)
 						/* Reset by ltt */
 
-#define	MAX_PHB			128		/* range 0-127 */
+#define	MAX_PHB			128	/* range 0-127 */
 
 /*****************************************************************************
 **********************************         ***********************************
@@ -291,86 +288,85 @@ typedef	struct	_PHB
    and there is normally an array of MAX_LINKS (=4) structures in a host card,
    defined by PARM_MAP->link_str_ptr. */
 
-typedef	struct	_LPB
-{
-	_u16		link_number;		/* 0x00 Link Number */
-	_u16		in_ch;			/* 0x02 Link In Channel */
-	_u16		out_ch;			/* 0x04 Link Out Channel */
-	_u8		attached_serial[4];	/* 0x06 Attached serial number */
-	_u8		attached_host_serial[4];/* 0x0A Serial number of Host who booted other end */
-	_u16		descheduled;		/* 0x0E Currently Descheduled */
-	_u16		state;			/* 0x10 Current state */
-	_u16		send_poll;		/* 0x12 Send a Poll Packet */
-	_u16		ltt_p;			/* 0x14 Process Descriptor */
-	_u16		lrt_p;			/* 0x16 Process Descriptor */
-	_u16		lrt_status;		/* 0x18 Current lrt status */
-	_u16		ltt_status;		/* 0x1A Current ltt status */
-	_u16		timeout;		/* 0x1C Timeout value */
-	_u16		topology;		/* 0x1E Topology bits */
-	_u16		mon_ltt;		/* 0x20 */
-	_u16		mon_lrt;		/* 0x22 */
-	_u16		num_pkts;		/* 0x24 */
-	_u16		add_packet_list;	/* 0x26 Add packets to here */
-	_u16		remove_packet_list;	/* 0x28 Send packets from here */
-
-	_u16		lrt_fail_chan;		/* 0x2A Lrt's failure channel */
-	_u16		ltt_fail_chan;		/* 0x2C Ltt's failure channel */
-
-	RUP		rup;			/* 0x2E RUP structure for HOST to driver comms */
-	RUP		link_rup;		/* 0x40 RUP for the link (POLL, topology etc.) */
-	_u16		attached_link;		/* 0x52 Number of attached link */
-	_u16		csum_errors;		/* 0x54 csum errors */
-	_u16		num_disconnects;	/* 0x56 number of disconnects */
-	_u16		num_sync_rcvd;		/* 0x58 # sync's received */
-	_u16		num_sync_rqst;		/* 0x5A # sync requests */
-	_u16		num_tx;			/* 0x5C Num pkts sent */
-	_u16		num_rx;			/* 0x5E Num pkts received */
-	_u16		module_attached;	/* 0x60 Module tpyes of attached */
-	_u16		led_timeout;		/* 0x62 LED timeout */
-	_u16		first_port;		/* 0x64 First port to service */
-	_u16		last_port;		/* 0x66 Last port to service */
+typedef struct _LPB {
+	_u16 link_number;	/* 0x00 Link Number */
+	_u16 in_ch;		/* 0x02 Link In Channel */
+	_u16 out_ch;		/* 0x04 Link Out Channel */
+	_u8 attached_serial[4];	/* 0x06 Attached serial number */
+	_u8 attached_host_serial[4];	/* 0x0A Serial number of Host who booted other end */
+	_u16 descheduled;	/* 0x0E Currently Descheduled */
+	_u16 state;		/* 0x10 Current state */
+	_u16 send_poll;		/* 0x12 Send a Poll Packet */
+	_u16 ltt_p;		/* 0x14 Process Descriptor */
+	_u16 lrt_p;		/* 0x16 Process Descriptor */
+	_u16 lrt_status;	/* 0x18 Current lrt status */
+	_u16 ltt_status;	/* 0x1A Current ltt status */
+	_u16 timeout;		/* 0x1C Timeout value */
+	_u16 topology;		/* 0x1E Topology bits */
+	_u16 mon_ltt;		/* 0x20 */
+	_u16 mon_lrt;		/* 0x22 */
+	_u16 num_pkts;		/* 0x24 */
+	_u16 add_packet_list;	/* 0x26 Add packets to here */
+	_u16 remove_packet_list;	/* 0x28 Send packets from here */
+
+	_u16 lrt_fail_chan;	/* 0x2A Lrt's failure channel */
+	_u16 ltt_fail_chan;	/* 0x2C Ltt's failure channel */
+
+	RUP rup;		/* 0x2E RUP structure for HOST to driver comms */
+	RUP link_rup;		/* 0x40 RUP for the link (POLL, topology etc.) */
+	_u16 attached_link;	/* 0x52 Number of attached link */
+	_u16 csum_errors;	/* 0x54 csum errors */
+	_u16 num_disconnects;	/* 0x56 number of disconnects */
+	_u16 num_sync_rcvd;	/* 0x58 # sync's received */
+	_u16 num_sync_rqst;	/* 0x5A # sync requests */
+	_u16 num_tx;		/* 0x5C Num pkts sent */
+	_u16 num_rx;		/* 0x5E Num pkts received */
+	_u16 module_attached;	/* 0x60 Module tpyes of attached */
+	_u16 led_timeout;	/* 0x62 LED timeout */
+	_u16 first_port;	/* 0x64 First port to service */
+	_u16 last_port;		/* 0x66 Last port to service */
 
 } LPB;
 
 /* Same thing again, but defined as offsets... */
 
-#define	LPB_link_number		0x00		/* 0x00 Link Number */
-#define	LPB_in_ch		0x02		/* 0x02 Link In Channel */
-#define	LPB_out_ch		0x04		/* 0x04 Link Out Channel */
-#define	LPB_attached_serial	0x06		/* 0x06 Attached serial number */
-#define	LPB_attached_host_serial 0x0A		/* 0x0A Serial number of Host who booted other end */
-#define	LPB_descheduled		0x0E		/* 0x0E Currently Descheduled */
-#define	LPB_state		0x10		/* 0x10 Current state */
-#define	LPB_send_poll		0x12		/* 0x12 Send a Poll Packet */
-#define	LPB_ltt_p		0x14		/* 0x14 Process Descriptor */
-#define	LPB_lrt_p		0x16		/* 0x16 Process Descriptor */
-#define	LPB_lrt_status		0x18		/* 0x18 Current lrt status */
-#define	LPB_ltt_status		0x1A		/* 0x1A Current ltt status */
-#define	LPB_timeout		0x1C		/* 0x1C Timeout value */
-#define	LPB_topology		0x1E		/* 0x1E Topology bits */
-#define	LPB_mon_ltt		0x20		/* 0x20 */
-#define	LPB_mon_lrt		0x22		/* 0x22 */
-#define	LPB_num_pkts		0x24		/* 0x24 */
-#define	LPB_add_packet_list	0x26		/* 0x26 Add packets to here */
-#define	LPB_remove_packet_list	0x28		/* 0x28 Send packets from here */
-#define	LPB_lrt_fail_chan	0x2A		/* 0x2A Lrt's failure channel */
-#define	LPB_ltt_fail_chan	0x2C		/* 0x2C Ltt's failure channel */
-#define	LPB_rup			0x2E		/* 0x2E RUP structure for HOST to driver comms */
-#define	LPB_link_rup		0x40		/* 0x40 RUP for the link (POLL, topology etc.) */
-#define	LPB_attached_link	0x52		/* 0x52 Number of attached link */
-#define	LPB_csum_errors		0x54		/* 0x54 csum errors */
-#define	LPB_num_disconnects	0x56		/* 0x56 number of disconnects */
-#define	LPB_num_sync_rcvd	0x58		/* 0x58 # sync's received */
-#define	LPB_num_sync_rqst	0x5A		/* 0x5A # sync requests */
-#define	LPB_num_tx		0x5C		/* 0x5C Num pkts sent */
-#define	LPB_num_rx		0x5E		/* 0x5E Num pkts received */
-#define	LPB_module_attached	0x60		/* 0x60 Module tpyes of attached */
-#define	LPB_led_timeout		0x62		/* 0x62 LED timeout */
-#define	LPB_first_port		0x64		/* 0x64 First port to service */
-#define	LPB_last_port		0x66		/* 0x66 Last port to service */
-#define	sizeof_LPB		0x68		/* structure size = 0x68 */
-
-#define	LINKS_PER_UNIT		4		/* number of links from a host */
+#define	LPB_link_number		0x00	/* 0x00 Link Number */
+#define	LPB_in_ch		0x02	/* 0x02 Link In Channel */
+#define	LPB_out_ch		0x04	/* 0x04 Link Out Channel */
+#define	LPB_attached_serial	0x06	/* 0x06 Attached serial number */
+#define	LPB_attached_host_serial 0x0A	/* 0x0A Serial number of Host who booted other end */
+#define	LPB_descheduled		0x0E	/* 0x0E Currently Descheduled */
+#define	LPB_state		0x10	/* 0x10 Current state */
+#define	LPB_send_poll		0x12	/* 0x12 Send a Poll Packet */
+#define	LPB_ltt_p		0x14	/* 0x14 Process Descriptor */
+#define	LPB_lrt_p		0x16	/* 0x16 Process Descriptor */
+#define	LPB_lrt_status		0x18	/* 0x18 Current lrt status */
+#define	LPB_ltt_status		0x1A	/* 0x1A Current ltt status */
+#define	LPB_timeout		0x1C	/* 0x1C Timeout value */
+#define	LPB_topology		0x1E	/* 0x1E Topology bits */
+#define	LPB_mon_ltt		0x20	/* 0x20 */
+#define	LPB_mon_lrt		0x22	/* 0x22 */
+#define	LPB_num_pkts		0x24	/* 0x24 */
+#define	LPB_add_packet_list	0x26	/* 0x26 Add packets to here */
+#define	LPB_remove_packet_list	0x28	/* 0x28 Send packets from here */
+#define	LPB_lrt_fail_chan	0x2A	/* 0x2A Lrt's failure channel */
+#define	LPB_ltt_fail_chan	0x2C	/* 0x2C Ltt's failure channel */
+#define	LPB_rup			0x2E	/* 0x2E RUP structure for HOST to driver comms */
+#define	LPB_link_rup		0x40	/* 0x40 RUP for the link (POLL, topology etc.) */
+#define	LPB_attached_link	0x52	/* 0x52 Number of attached link */
+#define	LPB_csum_errors		0x54	/* 0x54 csum errors */
+#define	LPB_num_disconnects	0x56	/* 0x56 number of disconnects */
+#define	LPB_num_sync_rcvd	0x58	/* 0x58 # sync's received */
+#define	LPB_num_sync_rqst	0x5A	/* 0x5A # sync requests */
+#define	LPB_num_tx		0x5C	/* 0x5C Num pkts sent */
+#define	LPB_num_rx		0x5E	/* 0x5E Num pkts received */
+#define	LPB_module_attached	0x60	/* 0x60 Module tpyes of attached */
+#define	LPB_led_timeout		0x62	/* 0x62 LED timeout */
+#define	LPB_first_port		0x64	/* 0x64 First port to service */
+#define	LPB_last_port		0x66	/* 0x66 Last port to service */
+#define	sizeof_LPB		0x68	/* structure size = 0x68 */
+
+#define	LINKS_PER_UNIT		4	/* number of links from a host */
 
 /*****************************************************************************
 ********************************               *******************************
@@ -380,17 +376,16 @@ typedef	struct	_LPB
 
 /* Used to overlay packet headers when allocating/freeing packets from the free list */
 
-typedef	struct	_FREE_LIST
-{
-	_u16		next;			/* 0x00 offset of next list item */
-	_u16		prev;			/* 0x02 offset of previous list item */
+typedef struct _FREE_LIST {
+	_u16 next;		/* 0x00 offset of next list item */
+	_u16 prev;		/* 0x02 offset of previous list item */
 
 } FREE_LIST;
 
 /* Same thing again, but defined as offsets... */
 
-#define	FL_next			0x00		/* 0x00 offset of next list item */
-#define	FL_prev			0x02		/* 0x02 offset of previous list item */
+#define	FL_next			0x00	/* 0x00 offset of next list item */
+#define	FL_prev			0x02	/* 0x02 offset of previous list item */
 
 /*****************************************************************************
 **********************************         ***********************************
@@ -401,32 +396,31 @@ typedef	struct	_FREE_LIST
 /* The PKT is the main unit of communication between Host Cards and RTAs across
    the RIO network.  */
 
-#define PKT_MAX_DATA_LEN   72			/* Size of packet data */
+#define PKT_MAX_DATA_LEN   72	/* Size of packet data */
 
-typedef	struct	_PKT
-{
-	_u8		dest_unit;		/* 0x00 Destination Unit Id */
-	_u8		dest_port;		/* 0x01 Destination Port */
-	_u8		src_unit;		/* 0x02 Source Unit Id */
-	_u8		src_port;		/* 0x03 Source Port */
-	_u8		len;			/* 0x04 Length (in bytes) of data field */
-	_u8		control;		/* 0x05 */
-	_u8		data[PKT_MAX_DATA_LEN];	/* 0x06 Actual data */
-	_u16		csum;			/* 0x4E C-SUM */
+typedef struct _PKT {
+	_u8 dest_unit;		/* 0x00 Destination Unit Id */
+	_u8 dest_port;		/* 0x01 Destination Port */
+	_u8 src_unit;		/* 0x02 Source Unit Id */
+	_u8 src_port;		/* 0x03 Source Port */
+	_u8 len;		/* 0x04 Length (in bytes) of data field */
+	_u8 control;		/* 0x05 */
+	_u8 data[PKT_MAX_DATA_LEN];	/* 0x06 Actual data */
+	_u16 csum;		/* 0x4E C-SUM */
 
 } PKT;
 
 /* Same thing again, but defined as offsets... */
 
-#define	PKT_dest_unit		0x00		/* 0x00 Destination Unit Id */
-#define	PKT_dest_port		0x01		/* 0x01 Destination Port */
-#define	PKT_src_unit		0x02		/* 0x02 Source Unit Id */
-#define	PKT_src_port		0x03		/* 0x03 Source Port */
-#define	PKT_len			0x04		/* 0x04 Length (in bytes) of data field */
-#define	PKT_control		0x05		/* 0x05 */
-#define	PKT_data		0x06		/* 0x06 Actual data */
-#define	PKT_csum		0x4E		/* 0x4E C-SUM */
-#define	sizeof_PKT		0x50		/* structure size = 0x50 */
+#define	PKT_dest_unit		0x00	/* 0x00 Destination Unit Id */
+#define	PKT_dest_port		0x01	/* 0x01 Destination Port */
+#define	PKT_src_unit		0x02	/* 0x02 Source Unit Id */
+#define	PKT_src_port		0x03	/* 0x03 Source Port */
+#define	PKT_len			0x04	/* 0x04 Length (in bytes) of data field */
+#define	PKT_control		0x05	/* 0x05 */
+#define	PKT_data		0x06	/* 0x06 Actual data */
+#define	PKT_csum		0x4E	/* 0x4E C-SUM */
+#define	sizeof_PKT		0x50	/* structure size = 0x50 */
 
 /* PKT.len definitions... */
 #define	PKT_CMD_BIT		0x80
@@ -449,38 +443,38 @@ typedef	struct	_PKT
 /* The following definitions and structures define the control packets sent
    between the driver and RIO Ports, RTAs and Host Cards. */
 
-#define	PRE_EMPTIVE		0x80			/* Pre-emptive command (sent via port's RUP) */
+#define	PRE_EMPTIVE		0x80	/* Pre-emptive command (sent via port's RUP) */
 
 /* "in-band" and "pre-emptive" port commands... */
-#define	OPEN			0x00			/* Driver->RIO Open a port */
-#define	CONFIG			0x01			/* Driver->RIO Configure a port */
-#define	MOPEN			0x02			/* Driver->RIO Modem open (wait for DCD) */
-#define	CLOSE			0x03			/* Driver->RIO Close a port */
+#define	OPEN			0x00	/* Driver->RIO Open a port */
+#define	CONFIG			0x01	/* Driver->RIO Configure a port */
+#define	MOPEN			0x02	/* Driver->RIO Modem open (wait for DCD) */
+#define	CLOSE			0x03	/* Driver->RIO Close a port */
 #define	WFLUSH			(0x04|PRE_EMPTIVE)	/* Driver->RIO Write flush */
 #define	RFLUSH			(0x05|PRE_EMPTIVE)	/* Driver->RIO Read flush */
 #define	RESUME			(0x06|PRE_EMPTIVE)	/* Driver->RIO Behave as if XON received */
-#define	SBREAK			0x07			/* Driver->RIO Start break */
-#define	EBREAK			0x08			/* Driver->RIO End break */
+#define	SBREAK			0x07	/* Driver->RIO Start break */
+#define	EBREAK			0x08	/* Driver->RIO End break */
 #define	SUSPEND			(0x09|PRE_EMPTIVE)	/* Driver->RIO Behave as if XOFF received */
 #define	FCLOSE			(0x0A|PRE_EMPTIVE)	/* Driver->RIO Force close */
-#define	XPRINT			0x0B			/* Driver->RIO Xprint packet */
+#define	XPRINT			0x0B	/* Driver->RIO Xprint packet */
 #define	MBIS			(0x0C|PRE_EMPTIVE)	/* Driver->RIO Set modem lines */
 #define	MBIC			(0x0D|PRE_EMPTIVE)	/* Driver->RIO Clear modem lines */
 #define	MSET			(0x0E|PRE_EMPTIVE)	/* Driver->RIO Set modem lines */
-#define	PCLOSE			0x0F			/* Driver->RIO Pseudo close */
+#define	PCLOSE			0x0F	/* Driver->RIO Pseudo close */
 #define	MGET			(0x10|PRE_EMPTIVE)	/* Driver->RIO Force update of modem status */
 #define	MEMDUMP			(0x11|PRE_EMPTIVE)	/* Driver->RIO DEBUG request for RTA memory */
 #define	READ_REGISTER		(0x12|PRE_EMPTIVE)	/* Driver->RIO DEBUG read CD1400 register */
 
 /* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */
-#define	SYNC_RUP		0xFF			/* Download internal */
-#define	COMMAND_RUP		0xFE			/* Command ack/status */
-#define	ERROR_RUP		0xFD			/* Download internal */
-#define	POLL_RUP		0xFC			/* Download internal */
-#define	BOOT_RUP		0xFB			/* Used to boot RTAs */
-#define	ROUTE_RUP		0xFA			/* Used to specify routing/topology */
-#define	STATUS_RUP		0xF9			/* Not used */
-#define	POWER_RUP		0xF8			/* Download internal */
+#define	SYNC_RUP		0xFF	/* Download internal */
+#define	COMMAND_RUP		0xFE	/* Command ack/status */
+#define	ERROR_RUP		0xFD	/* Download internal */
+#define	POLL_RUP		0xFC	/* Download internal */
+#define	BOOT_RUP		0xFB	/* Used to boot RTAs */
+#define	ROUTE_RUP		0xFA	/* Used to specify routing/topology */
+#define	STATUS_RUP		0xF9	/* Not used */
+#define	POWER_RUP		0xF8	/* Download internal */
 
 /* COMMAND_RUP definitions... */
 #define	COMPLETE		(0x20|PRE_EMPTIVE)	/* RIO->Driver Command complete */
@@ -488,24 +482,24 @@ typedef	struct	_PKT
 #define	MODEM_STATUS		(0x22|PRE_EMPTIVE)	/* RIO->Driver Modem status change */
 
 /* BOOT_RUP definitions... */
-#define	BOOT_REQUEST		0x00			/* RIO->Driver Request for boot */
-#define	BOOT_ABORT		0x01			/* Driver->RIO Abort a boot */
-#define	BOOT_SEQUENCE		0x02			/* Driver->RIO Packet with firmware details */
-#define	BOOT_COMPLETED		0x03			/* RIO->Driver Boot completed */
-#define IFOAD			0x2F			/* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */
-#define	IDENTIFY		0x30			/* Driver->RIO Identify RTA */
-#define	ZOMBIE			0x31			/* Driver->RIO Shutdown/Flash LEDs */
-#define	UFOAD			0x32			/* Driver->RIO Shutdown/Reboot neighbouring RTA */
-#define IWAIT			0x33			/* Driver->RIO Pause booting process */
+#define	BOOT_REQUEST		0x00	/* RIO->Driver Request for boot */
+#define	BOOT_ABORT		0x01	/* Driver->RIO Abort a boot */
+#define	BOOT_SEQUENCE		0x02	/* Driver->RIO Packet with firmware details */
+#define	BOOT_COMPLETED		0x03	/* RIO->Driver Boot completed */
+#define IFOAD			0x2F	/* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */
+#define	IDENTIFY		0x30	/* Driver->RIO Identify RTA */
+#define	ZOMBIE			0x31	/* Driver->RIO Shutdown/Flash LEDs */
+#define	UFOAD			0x32	/* Driver->RIO Shutdown/Reboot neighbouring RTA */
+#define IWAIT			0x33	/* Driver->RIO Pause booting process */
 
 /* ROUTE_RUP definitions... */
-#define	ROUTE_REQUEST		0x00			/* RIO->Driver Request an ID */
-#define	ROUTE_FOAD		0x01			/* Driver->RIO Shutdown/reboot RTA */
-#define	ROUTE_ALREADY		0x02			/* Driver->RIO Not used */
-#define	ROUTE_USED		0x03			/* Driver->RIO Not used */
-#define	ROUTE_ALLOCATE		0x04			/* Driver->RIO Allocate RTA RUP numbers */
-#define	ROUTE_REQ_TOP		0x05			/* Driver->RIO Not used */
-#define ROUTE_TOPOLOGY		0x06			/* RIO->Driver Route/Topology status */
+#define	ROUTE_REQUEST		0x00	/* RIO->Driver Request an ID */
+#define	ROUTE_FOAD		0x01	/* Driver->RIO Shutdown/reboot RTA */
+#define	ROUTE_ALREADY		0x02	/* Driver->RIO Not used */
+#define	ROUTE_USED		0x03	/* Driver->RIO Not used */
+#define	ROUTE_ALLOCATE		0x04	/* Driver->RIO Allocate RTA RUP numbers */
+#define	ROUTE_REQ_TOP		0x05	/* Driver->RIO Not used */
+#define ROUTE_TOPOLOGY		0x06	/* RIO->Driver Route/Topology status */
 
 /*****************************************************************************
 **********************************          **********************************
@@ -518,89 +512,89 @@ typedef	struct	_PKT
    Sent to open a port. 
    Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */
 
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_Cor1		(PKT_Data+1)		/* Channel Option Register 1 */
-#define	PKT_Cor2		(PKT_Data+2)		/* Channel Option Register 2 */
-#define	PKT_Cor4		(PKT_Data+3)		/* Channel Option Register 4 */
-#define	PKT_Cor5		(PKT_Data+4)		/* Channel Option Register 5 */
-#define	PKT_TxXon		(PKT_Data+5)		/* Transmit XON character */
-#define	PKT_TxXoff		(PKT_Data+6)		/* Transmit XOFF character */
-#define	PKT_RxXon		(PKT_Data+7)		/* Receive XON character */
-#define	PKT_RxXoff		(PKT_Data+8)		/* Receive XOFF character */
-#define	PKT_Lnext		(PKT_Data+9)		/* Lnext character */
-#define	PKT_TxBaud		(PKT_Data+10)		/* Transmit baud rate */
-#define	PKT_RxBaud		(PKT_Data+11)		/* Receive baud rate */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_Cor1		(PKT_Data+1)	/* Channel Option Register 1 */
+#define	PKT_Cor2		(PKT_Data+2)	/* Channel Option Register 2 */
+#define	PKT_Cor4		(PKT_Data+3)	/* Channel Option Register 4 */
+#define	PKT_Cor5		(PKT_Data+4)	/* Channel Option Register 5 */
+#define	PKT_TxXon		(PKT_Data+5)	/* Transmit XON character */
+#define	PKT_TxXoff		(PKT_Data+6)	/* Transmit XOFF character */
+#define	PKT_RxXon		(PKT_Data+7)	/* Receive XON character */
+#define	PKT_RxXoff		(PKT_Data+8)	/* Receive XOFF character */
+#define	PKT_Lnext		(PKT_Data+9)	/* Lnext character */
+#define	PKT_TxBaud		(PKT_Data+10)	/* Transmit baud rate */
+#define	PKT_RxBaud		(PKT_Data+11)	/* Receive baud rate */
 
 /* COR1 definitions... */
-#define	COR1_PARITY		0xE0			/* Parity mask */
-#define	COR1_NONE		0x00			/* No parity */
-#define	COR1_SPACE		0x20			/* Space parity */
-#define	COR1_EVEN		0x40			/* Even parity */
-#define	COR1_MARK		0xA0			/* Mark parity */
-#define	COR1_ODD		0xC0			/* Odd parity */
-
-#define	COR1_STOPBITS		0x0C			/* Stop bits mask */
-#define	COR1_STOP1		0x00			/* 1 stop bit */
-#define	COR1_STOP1_5		0x04			/* 1.5 stop bits */
-#define	COR1_STOP2		0x08			/* 2 stop bits */
-
-#define	COR1_DATABITS		0x03			/* Data bits mask */
-#define	COR1_DATA5		0x00			/* 5 data bits */
-#define	COR1_DATA6		0x01			/* 6 data bits */
-#define	COR1_DATA7		0x02			/* 7 data bits */
-#define	COR1_DATA8		0x03			/* 8 data bits */
+#define	COR1_PARITY		0xE0	/* Parity mask */
+#define	COR1_NONE		0x00	/* No parity */
+#define	COR1_SPACE		0x20	/* Space parity */
+#define	COR1_EVEN		0x40	/* Even parity */
+#define	COR1_MARK		0xA0	/* Mark parity */
+#define	COR1_ODD		0xC0	/* Odd parity */
+
+#define	COR1_STOPBITS		0x0C	/* Stop bits mask */
+#define	COR1_STOP1		0x00	/* 1 stop bit */
+#define	COR1_STOP1_5		0x04	/* 1.5 stop bits */
+#define	COR1_STOP2		0x08	/* 2 stop bits */
+
+#define	COR1_DATABITS		0x03	/* Data bits mask */
+#define	COR1_DATA5		0x00	/* 5 data bits */
+#define	COR1_DATA6		0x01	/* 6 data bits */
+#define	COR1_DATA7		0x02	/* 7 data bits */
+#define	COR1_DATA8		0x03	/* 8 data bits */
 
 /* COR2 definitions... */
-#define	COR2_XON_TXFLOW		0x40			/* XON/XOFF Transmit Flow */
-#define	COR2_XANY_TXFLOW	0xC0			/* XON/XANY Transmit Flow */
-#define	COR2_HUPCL		0x20			/* Hang Up On Close */
-#define	COR2_DSR_TXFLOW		0x08			/* DSR Transmit Flow Control */
-#define	COR2_RTS_RXFLOW		0x04			/* RTS Receive Flow Control */
-#define	COR2_CTS_TXFLOW		0x02			/* CTS Transmit Flow Control */
-#define	COR2_XON_RXFLOW		0x01			/* XON/XOFF Receive Flow */
+#define	COR2_XON_TXFLOW		0x40	/* XON/XOFF Transmit Flow */
+#define	COR2_XANY_TXFLOW	0xC0	/* XON/XANY Transmit Flow */
+#define	COR2_HUPCL		0x20	/* Hang Up On Close */
+#define	COR2_DSR_TXFLOW		0x08	/* DSR Transmit Flow Control */
+#define	COR2_RTS_RXFLOW		0x04	/* RTS Receive Flow Control */
+#define	COR2_CTS_TXFLOW		0x02	/* CTS Transmit Flow Control */
+#define	COR2_XON_RXFLOW		0x01	/* XON/XOFF Receive Flow */
 
 /* COR4 definition... */
-#define	COR4_IGNCR		0x80			/* Discard received CR */
-#define	COR4_ICRNL		0x40			/* Map received CR -> NL */
-#define	COR4_INLCR		0x20			/* Map received NL -> CR */
-#define	COR4_IGNBRK		0x10			/* Ignore Received Break */
-#define	COR4_NBRKINT		0x08			/* No interrupt on rx Break */
-#define	COR4_IGNPAR		0x04			/* ignore rx parity error chars */
-#define	COR4_PARMRK		0x02			/* Mark rx parity error chars */
-#define	COR4_RAISEMOD		0x01			/* Raise modem lines on !0 baud */
+#define	COR4_IGNCR		0x80	/* Discard received CR */
+#define	COR4_ICRNL		0x40	/* Map received CR -> NL */
+#define	COR4_INLCR		0x20	/* Map received NL -> CR */
+#define	COR4_IGNBRK		0x10	/* Ignore Received Break */
+#define	COR4_NBRKINT		0x08	/* No interrupt on rx Break */
+#define	COR4_IGNPAR		0x04	/* ignore rx parity error chars */
+#define	COR4_PARMRK		0x02	/* Mark rx parity error chars */
+#define	COR4_RAISEMOD		0x01	/* Raise modem lines on !0 baud */
 
 /* COR5 definitions... */
-#define	COR5_ISTRIP		0x80			/* Strip input chars to 7 bits */
-#define	COR5_LNE		0x40			/* Enable LNEXT processing */
-#define	COR5_CMOE		0x20			/* Match good & error characters */
-#define	COR5_TAB3		0x10			/* TAB3 mode */
-#define	COR5_TSTATE_ON		0x08			/* Enable tbusy/tstop monitoring */
-#define	COR5_TSTATE_OFF		0x04			/* Disable tbusy/tstop monitoring */
-#define	COR5_ONLCR		0x02			/* NL -> CR NL on output */
-#define	COR5_OCRNL		0x01			/* CR -> NL on output */
+#define	COR5_ISTRIP		0x80	/* Strip input chars to 7 bits */
+#define	COR5_LNE		0x40	/* Enable LNEXT processing */
+#define	COR5_CMOE		0x20	/* Match good & error characters */
+#define	COR5_TAB3		0x10	/* TAB3 mode */
+#define	COR5_TSTATE_ON		0x08	/* Enable tbusy/tstop monitoring */
+#define	COR5_TSTATE_OFF		0x04	/* Disable tbusy/tstop monitoring */
+#define	COR5_ONLCR		0x02	/* NL -> CR NL on output */
+#define	COR5_OCRNL		0x01	/* CR -> NL on output */
 
 /* RxBaud and TxBaud definitions... */
-#define	RIO_B0			0x00			/* RTS / DTR signals dropped */
-#define	RIO_B50			0x01			/* 50 baud */
-#define	RIO_B75			0x02			/* 75 baud */
-#define	RIO_B110		0x03			/* 110 baud */
-#define	RIO_B134		0x04			/* 134.5 baud */
-#define	RIO_B150		0x05			/* 150 baud */
-#define	RIO_B200		0x06			/* 200 baud */
-#define	RIO_B300		0x07			/* 300 baud */
-#define	RIO_B600		0x08			/* 600 baud */
-#define	RIO_B1200		0x09			/* 1200 baud */
-#define	RIO_B1800		0x0A			/* 1800 baud */
-#define	RIO_B2400		0x0B			/* 2400 baud */
-#define	RIO_B4800		0x0C			/* 4800 baud */
-#define	RIO_B9600		0x0D			/* 9600 baud */
-#define	RIO_B19200		0x0E			/* 19200 baud */
-#define	RIO_B38400		0x0F			/* 38400 baud */
-#define	RIO_B56000		0x10			/* 56000 baud */
-#define	RIO_B57600		0x11			/* 57600 baud */
-#define	RIO_B64000		0x12			/* 64000 baud */
-#define	RIO_B115200		0x13			/* 115200 baud */
-#define	RIO_B2000		0x14			/* 2000 baud */
+#define	RIO_B0			0x00	/* RTS / DTR signals dropped */
+#define	RIO_B50			0x01	/* 50 baud */
+#define	RIO_B75			0x02	/* 75 baud */
+#define	RIO_B110		0x03	/* 110 baud */
+#define	RIO_B134		0x04	/* 134.5 baud */
+#define	RIO_B150		0x05	/* 150 baud */
+#define	RIO_B200		0x06	/* 200 baud */
+#define	RIO_B300		0x07	/* 300 baud */
+#define	RIO_B600		0x08	/* 600 baud */
+#define	RIO_B1200		0x09	/* 1200 baud */
+#define	RIO_B1800		0x0A	/* 1800 baud */
+#define	RIO_B2400		0x0B	/* 2400 baud */
+#define	RIO_B4800		0x0C	/* 4800 baud */
+#define	RIO_B9600		0x0D	/* 9600 baud */
+#define	RIO_B19200		0x0E	/* 19200 baud */
+#define	RIO_B38400		0x0F	/* 38400 baud */
+#define	RIO_B56000		0x10	/* 56000 baud */
+#define	RIO_B57600		0x11	/* 57600 baud */
+#define	RIO_B64000		0x12	/* 64000 baud */
+#define	RIO_B115200		0x13	/* 115200 baud */
+#define	RIO_B2000		0x14	/* 2000 baud */
 
 /*****************************************************************************
 *********************************            *********************************
@@ -636,7 +630,7 @@ typedef	struct	_PKT
    No parameters.
  */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
 /*****************************************************************************
 *********************************            *********************************
@@ -653,9 +647,9 @@ typedef	struct	_PKT
    write flushing previously started by a pre-emptive WFLUSH packet. (in-band)
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 
 /*****************************************************************************
 *********************************            *********************************
@@ -669,8 +663,8 @@ typedef	struct	_PKT
    packets of a port.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
 /*****************************************************************************
@@ -685,8 +679,8 @@ typedef	struct	_PKT
    transmission of data if blocked by XOFF.  (as if XON had been received)
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
 /*****************************************************************************
@@ -707,9 +701,9 @@ typedef	struct	_PKT
    specified number of mS.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_BreakDelay		(PKT_Data+1)		/* Break delay in mS */
+#define	PKT_BreakDelay		(PKT_Data+1)	/* Break delay in mS */
 
 /*****************************************************************************
 *********************************            *********************************
@@ -736,8 +730,8 @@ typedef	struct	_PKT
    transmission of data.  (as if XOFF had been received)
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
 /*****************************************************************************
@@ -753,8 +747,8 @@ typedef	struct	_PKT
    modem signals if the COR5_HUPCL (Hang Up On Close) flag is set.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
 /*****************************************************************************
@@ -774,8 +768,8 @@ typedef	struct	_PKT
    -	Transparent Print Stop Sequence.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
 /*****************************************************************************
@@ -789,14 +783,14 @@ typedef	struct	_PKT
    MBIS is sent pre-emptively from the driver to set a port's modem signals.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
-#define	PKT_ModemSet		(PKT_Data+4)		/* Modem set signals mask */
+#define	PKT_ModemSet		(PKT_Data+4)	/* Modem set signals mask */
 
 /* ModemSet definitions... */
-#define	MBIS_RTS		0x01			/* RTS modem signal */
-#define	MBIS_DTR		0x02			/* DTR modem signal */
+#define	MBIS_RTS		0x01	/* RTS modem signal */
+#define	MBIS_DTR		0x02	/* DTR modem signal */
 
 /*****************************************************************************
 **********************************          **********************************
@@ -808,16 +802,16 @@ typedef	struct	_PKT
 
    MBIC is sent pre-emptively from the driver to clear a port's modem signals.
    */
-#if 0   
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#if 0
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
-#define	PKT_ModemClear		(PKT_Data+4)		/* Modem clear signals mask */
+#define	PKT_ModemClear		(PKT_Data+4)	/* Modem clear signals mask */
 
 /* ModemClear definitions... */
-#define	MBIC_RTS		0x01			/* RTS modem signal */
-#define	MBIC_DTR		0x02			/* DTR modem signal */
+#define	MBIC_RTS		0x01	/* RTS modem signal */
+#define	MBIC_DTR		0x02	/* DTR modem signal */
 
 /*****************************************************************************
 **********************************          **********************************
@@ -829,15 +823,15 @@ typedef	struct	_PKT
 
    MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 #endif
 
-#define	PKT_ModemSet		(PKT_Data+4)		/* Modem set signals mask */
+#define	PKT_ModemSet		(PKT_Data+4)	/* Modem set signals mask */
 
 /* ModemSet definitions... */
-#define	MSET_RTS		0x01			/* RTS modem signal */
-#define	MSET_DTR		0x02			/* DTR modem signal */
+#define	MSET_RTS		0x01	/* RTS modem signal */
+#define	MSET_DTR		0x02	/* DTR modem signal */
 
 /*****************************************************************************
 *********************************            *********************************
@@ -853,7 +847,7 @@ typedef	struct	_PKT
    port's transmit / receive and modem signals will be left enabled and the
    port marked internally as Pseudo Closed. */
 
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 
 /*****************************************************************************
 **********************************          **********************************
@@ -865,8 +859,8 @@ typedef	struct	_PKT
 
    MGET is sent pre-emptively from the driver to request the port's current modem signals. */
 
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
 
 /*****************************************************************************
 *********************************             ********************************
@@ -880,11 +874,11 @@ typedef	struct	_PKT
    of the specified port's RTA address space.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)		/* Requested address */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
+#define	PKT_Address		(PKT_Data+6)	/* Requested address */
 
 /*****************************************************************************
 ******************************                   *****************************
@@ -898,11 +892,11 @@ typedef	struct	_PKT
    of the CD1400 register specified in address.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)		/* Requested address */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
+#define	PKT_Address		(PKT_Data+6)	/* Requested address */
 
 /*****************************************************************************
 ************************                            **************************
@@ -916,33 +910,33 @@ typedef	struct	_PKT
    packets, except MEMDUMP and READ_REGISTER.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)		/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)		/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
+#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
+#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
 
 /* ModemStatus definitions... */
-#define	MODEM_DSR		0x80			/* Data Set Ready modem state */
-#define	MODEM_CTS		0x40			/* Clear To Send modem state */
-#define	MODEM_RI		0x20			/* Ring Indicate modem state */
-#define	MODEM_CD		0x10			/* Carrier Detect modem state */
-#define	MODEM_TSTOP		0x08			/* Transmit Stopped state */
-#define	MODEM_TEMPTY		0x04			/* Transmit Empty state */
-#define	MODEM_DTR		0x02			/* DTR modem output state */
-#define	MODEM_RTS		0x01			/* RTS modem output state */
+#define	MODEM_DSR		0x80	/* Data Set Ready modem state */
+#define	MODEM_CTS		0x40	/* Clear To Send modem state */
+#define	MODEM_RI		0x20	/* Ring Indicate modem state */
+#define	MODEM_CD		0x10	/* Carrier Detect modem state */
+#define	MODEM_TSTOP		0x08	/* Transmit Stopped state */
+#define	MODEM_TEMPTY		0x04	/* Transmit Empty state */
+#define	MODEM_DTR		0x02	/* DTR modem output state */
+#define	MODEM_RTS		0x01	/* RTS modem output state */
 
 /* PortStatus definitions... */
-#define	PORT_ISOPEN		0x01			/* Port open ? */
-#define	PORT_HUPCL		0x02			/* Hangup on close? */
-#define	PORT_MOPENPEND		0x04			/* Modem open pending */
-#define	PORT_ISPARALLEL		0x08			/* Parallel port */
-#define	PORT_BREAK		0x10			/* Port on break */
-#define	PORT_STATUSPEND		0020			/* Status packet pending */
-#define	PORT_BREAKPEND		0x40			/* Break packet pending */
-#define	PORT_MODEMPEND		0x80			/* Modem status packet pending */
+#define	PORT_ISOPEN		0x01	/* Port open ? */
+#define	PORT_HUPCL		0x02	/* Hangup on close? */
+#define	PORT_MOPENPEND		0x04	/* Modem open pending */
+#define	PORT_ISPARALLEL		0x08	/* Parallel port */
+#define	PORT_BREAK		0x10	/* Port on break */
+#define	PORT_STATUSPEND		0020	/* Status packet pending */
+#define	PORT_BREAKPEND		0x40	/* Break packet pending */
+#define	PORT_MODEMPEND		0x80	/* Modem status packet pending */
 
 /*****************************************************************************
 ************************                            **************************
@@ -956,35 +950,35 @@ typedef	struct	_PKT
    packets, except MEMDUMP and READ_REGISTER.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
 #endif
-#define	PKT_ModemStatus		(PKT_Data+3)		/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)		/* Port signal status */
+#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
+#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
 #if 0
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
 #endif
 
 /* ModemStatus definitions... */
-#define	MODEM_DSR		0x80			/* Data Set Ready modem state */
-#define	MODEM_CTS		0x40			/* Clear To Send modem state */
-#define	MODEM_RI		0x20			/* Ring Indicate modem state */
-#define	MODEM_CD		0x10			/* Carrier Detect modem state */
-#define	MODEM_TSTOP		0x08			/* Transmit Stopped state */
-#define	MODEM_TEMPTY		0x04			/* Transmit Empty state */
-#define	MODEM_DTR		0x02			/* DTR modem output state */
-#define	MODEM_RTS		0x01			/* RTS modem output state */
+#define	MODEM_DSR		0x80	/* Data Set Ready modem state */
+#define	MODEM_CTS		0x40	/* Clear To Send modem state */
+#define	MODEM_RI		0x20	/* Ring Indicate modem state */
+#define	MODEM_CD		0x10	/* Carrier Detect modem state */
+#define	MODEM_TSTOP		0x08	/* Transmit Stopped state */
+#define	MODEM_TEMPTY		0x04	/* Transmit Empty state */
+#define	MODEM_DTR		0x02	/* DTR modem output state */
+#define	MODEM_RTS		0x01	/* RTS modem output state */
 
 /* PortStatus definitions... */
-#define	PORT_ISOPEN		0x01			/* Port open ? */
-#define	PORT_HUPCL		0x02			/* Hangup on close? */
-#define	PORT_MOPENPEND		0x04			/* Modem open pending */
-#define	PORT_ISPARALLEL		0x08			/* Parallel port */
-#define	PORT_BREAK		0x10			/* Port on break */
-#define	PORT_STATUSPEND		0020			/* Status packet pending */
-#define	PORT_BREAKPEND		0x40			/* Break packet pending */
-#define	PORT_MODEMPEND		0x80			/* Modem status packet pending */
+#define	PORT_ISOPEN		0x01	/* Port open ? */
+#define	PORT_HUPCL		0x02	/* Hangup on close? */
+#define	PORT_MOPENPEND		0x04	/* Modem open pending */
+#define	PORT_ISPARALLEL		0x08	/* Parallel port */
+#define	PORT_BREAK		0x10	/* Port on break */
+#define	PORT_STATUSPEND		0020	/* Status packet pending */
+#define	PORT_BREAKPEND		0x40	/* Break packet pending */
+#define	PORT_MODEMPEND		0x80	/* Modem status packet pending */
 
 /*****************************************************************************
 ********************                                      ********************
@@ -998,15 +992,15 @@ typedef	struct	_PKT
    port I/O control command packet.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)		/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)		/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)		/* Requested address */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
+#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
+#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
+#define	PKT_Address		(PKT_Data+6)	/* Requested address */
 #endif
-#define	PKT_Dump		(PKT_Data+8)		/* 32bytes of requested dump data */
+#define	PKT_Dump		(PKT_Data+8)	/* 32bytes of requested dump data */
 
 /*****************************************************************************
 *****************                                            *****************
@@ -1020,14 +1014,14 @@ typedef	struct	_PKT
    READ_REGISTER port I/O control command packet.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/*Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/*Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
+#define	PKT_Cmd			(PKT_Data+0)	/*Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/*Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
 #endif
-#define	PKT_RegisterValue	(PKT_Data+3)		/* Modem signal status */
+#define	PKT_RegisterValue	(PKT_Data+3)	/* Modem signal status */
 #if 0
-#define	PKT_PortStatus		(PKT_Data+4)		/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)		/* Sub Command */
+#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
+#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
 #endif
 
 /*****************************************************************************
@@ -1041,9 +1035,9 @@ typedef	struct	_PKT
    COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
 #endif
 
 /*****************************************************************************
@@ -1059,10 +1053,10 @@ typedef	struct	_PKT
 
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)		/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)		/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)		/* Modem signal status */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
+#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
+#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
 #endif
 
 /*****************************************************************************
@@ -1077,7 +1071,7 @@ typedef	struct	_PKT
    firmware code to load onto attached RTAs.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
 
 /*****************************************************************************
@@ -1092,12 +1086,12 @@ typedef	struct	_PKT
    to a BOOT_RUP - BOOT_REQUEST packet.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_NumPackets		(PKT_Data+2)		/* Packets required to load firmware */
-#define	PKT_LoadBase		(PKT_Data+4)		/* RTA firmware load address */
-#define	PKT_CodeSize		(PKT_Data+6)		/* Size of firmware in bytes */
-#define	PKT_CmdString		(PKT_Data+8)		/* Command string */
+#define	PKT_NumPackets		(PKT_Data+2)	/* Packets required to load firmware */
+#define	PKT_LoadBase		(PKT_Data+4)	/* RTA firmware load address */
+#define	PKT_CodeSize		(PKT_Data+6)	/* Size of firmware in bytes */
+#define	PKT_CmdString		(PKT_Data+8)	/* Command string */
 
 /*****************************************************************************
 ************************                               ***********************
@@ -1111,10 +1105,10 @@ typedef	struct	_PKT
    RTA firmware has completed.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_LinkNumber		(PKT_Data+1)		/* Link number RTA booted on */
-#define	PKT_SerialNumber	(PKT_Data+2)		/* 4 byte serial number */
+#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number RTA booted on */
+#define	PKT_SerialNumber	(PKT_Data+2)	/* 4 byte serial number */
 
 /*****************************************************************************
 ************************                               ***********************
@@ -1127,7 +1121,7 @@ typedef	struct	_PKT
    BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent
    from RIO to the Driver as a request for a firmware boot packet. */
 
-#define	PKT_SequenceNumber	(PKT_Data+0)		/* Packet sequence number */
+#define	PKT_SequenceNumber	(PKT_Data+0)	/* Packet sequence number */
 
 /*****************************************************************************
 ***********************                                ***********************
@@ -1141,9 +1135,9 @@ typedef	struct	_PKT
    packet with the 70 bytes of the requested sequence.
    */
 #if 0
-#define	PKT_SequenceNumber	(PKT_Data+0)		/* Packet sequence number */
+#define	PKT_SequenceNumber	(PKT_Data+0)	/* Packet sequence number */
 #endif
-#define	PKT_FirmwarePacket	(PKT_Data+2)		/* Firmware packet */
+#define	PKT_FirmwarePacket	(PKT_Data+2)	/* Firmware packet */
 
 /*****************************************************************************
 ****************************                      ****************************
@@ -1157,10 +1151,10 @@ typedef	struct	_PKT
    RTA to shut down and reboot.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_IfoadId1		(PKT_Data+2)		/* IFOAD Id 1 */
-#define	PKT_IfoadId2		(PKT_Data+3)		/* IFOAD Id 2 */
+#define	PKT_IfoadId1		(PKT_Data+2)	/* IFOAD Id 1 */
+#define	PKT_IfoadId2		(PKT_Data+3)	/* IFOAD Id 2 */
 
 #define	IFOADID1		0xAD
 #define	IFOADID2		0xF0
@@ -1177,9 +1171,9 @@ typedef	struct	_PKT
    RTA to flash its LEDs for a period of time.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_IdentifyId		(PKT_Data+2)		/* defines pattern to flash */
+#define	PKT_IdentifyId		(PKT_Data+2)	/* defines pattern to flash */
 
 /*****************************************************************************
 ****************************                       ***************************
@@ -1193,10 +1187,10 @@ typedef	struct	_PKT
    RTA to shut down and flash it's LEDs.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_ZombieId1		(PKT_Data+2)		/* ZOMBIE Id 1 */
-#define	PKT_ZombieId2		(PKT_Data+3)		/* ZOMBIE Id 2 */
+#define	PKT_ZombieId1		(PKT_Data+2)	/* ZOMBIE Id 1 */
+#define	PKT_ZombieId2		(PKT_Data+3)	/* ZOMBIE Id 2 */
 
 #define	ZOMBIEID1		0x52
 #define	ZOMBIEID2		0x21
@@ -1213,11 +1207,11 @@ typedef	struct	_PKT
    to ask it's neighbouring RTA to shut down and reboot.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_LinkNumber		(PKT_Data+1)		/* Link number of RTA to UFOAD */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number of RTA to UFOAD */
 #endif
-#define	PKT_UfoadId1		(PKT_Data+2)		/* UFOAD Id 1 */
-#define	PKT_UfoadId2		(PKT_Data+3)		/* UFOAD Id 2 */
+#define	PKT_UfoadId1		(PKT_Data+2)	/* UFOAD Id 1 */
+#define	PKT_UfoadId2		(PKT_Data+3)	/* UFOAD Id 2 */
 
 #define	UFOADID1		0x1E
 #define	UFOADID2		0x0D
@@ -1234,11 +1228,11 @@ typedef	struct	_PKT
    to pause booting on the specified link for 30 seconds.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
-#define	PKT_LinkNumber		(PKT_Data+1)		/* Link number of RTA to UFOAD */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
+#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number of RTA to UFOAD */
 #endif
-#define	PKT_IwaitId1		(PKT_Data+2)		/* IWAIT Id 1 */
-#define	PKT_IwaitId2		(PKT_Data+3)		/* IWAIT Id 2 */
+#define	PKT_IwaitId1		(PKT_Data+2)	/* IWAIT Id 1 */
+#define	PKT_IwaitId2		(PKT_Data+3)	/* IWAIT Id 2 */
 
 #define	IWAITID1		0xDE
 #define	IWAITID2		0xB1
@@ -1255,20 +1249,20 @@ typedef	struct	_PKT
    RTA to a Driver to request an ID (RUP or unit number).
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_SerialNumber	(PKT_Data+2)		/* 4 byte serial number */
-#define	PKT_ModuleTypes		(PKT_Data+6)		/* RTA Module types */
+#define	PKT_SerialNumber	(PKT_Data+2)	/* 4 byte serial number */
+#define	PKT_ModuleTypes		(PKT_Data+6)	/* RTA Module types */
 
 /* ModuleTypes definitions... */
-#define	MOD_BLANK		0x0F			/* Blank plate attached */
-#define	MOD_RS232DB25		0x00			/* RS232 DB25 connector */
-#define	MOD_RS232RJ45		0x01			/* RS232 RJ45 connector */
-#define	MOD_RS422DB25		0x02			/* RS422 DB25 connector */
-#define	MOD_RS485DB25		0x03			/* RS485 DB25 connector */
-#define	MOD_PARALLEL		0x04			/* Centronics parallel */
+#define	MOD_BLANK		0x0F	/* Blank plate attached */
+#define	MOD_RS232DB25		0x00	/* RS232 DB25 connector */
+#define	MOD_RS232RJ45		0x01	/* RS232 RJ45 connector */
+#define	MOD_RS422DB25		0x02	/* RS422 DB25 connector */
+#define	MOD_RS485DB25		0x03	/* RS485 DB25 connector */
+#define	MOD_PARALLEL		0x04	/* Centronics parallel */
 
-#define	MOD2			0x08			/* Set to indicate Rev2 module */
+#define	MOD2			0x08	/* Set to indicate Rev2 module */
 
 /*****************************************************************************
 *************************                            *************************
@@ -1282,9 +1276,9 @@ typedef	struct	_PKT
    packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_RouteCmdString	(PKT_Data+2)		/* Command string */
+#define	PKT_RouteCmdString	(PKT_Data+2)	/* Command string */
 
 /*****************************************************************************
 ***********************                                ***********************
@@ -1298,13 +1292,13 @@ typedef	struct	_PKT
    packet to allocate the RTA's Id number (RUP number 1..16)
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_IdNum		(PKT_Data+1)		/* RUP number for ports 1..8 */
+#define	PKT_IdNum		(PKT_Data+1)	/* RUP number for ports 1..8 */
 #if 0
-#define	PKT_RouteCmdString	(PKT_Data+2)		/* Command string */
+#define	PKT_RouteCmdString	(PKT_Data+2)	/* Command string */
 #endif
-#define	PKT_IdNum2		(PKT_Data+0x17)		/* RUP number for ports 9..16 */
+#define	PKT_IdNum2		(PKT_Data+0x17)	/* RUP number for ports 9..16 */
 
 /*****************************************************************************
 ***********************                                ***********************
@@ -1318,18 +1312,18 @@ typedef	struct	_PKT
    current link status.
    */
 #if 0
-#define	PKT_Cmd			(PKT_Data+0)		/* Command code */
+#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
 #endif
-#define	PKT_Link1Rup		(PKT_Data+2)		/* Link 1 RUP number */
-#define	PKT_Link1Link		(PKT_Data+3)		/* Link 1 link number */
-#define	PKT_Link2Rup		(PKT_Data+4)		/* Link 2 RUP number */
-#define	PKT_Link2Link		(PKT_Data+5)		/* Link 2 link number */
-#define	PKT_Link3Rup		(PKT_Data+6)		/* Link 3 RUP number */
-#define	PKT_Link3Link		(PKT_Data+7)		/* Link 3 link number */
-#define	PKT_Link4Rup		(PKT_Data+8)		/* Link 4 RUP number */
-#define	PKT_Link4Link		(PKT_Data+9)		/* Link 4 link number */
-#define	PKT_RtaVpdProm		(PKT_Data+10)		/* 32 bytes of RTA VPD PROM Contents */
-
-#endif						/* _sxwinif_h */
+#define	PKT_Link1Rup		(PKT_Data+2)	/* Link 1 RUP number */
+#define	PKT_Link1Link		(PKT_Data+3)	/* Link 1 link number */
+#define	PKT_Link2Rup		(PKT_Data+4)	/* Link 2 RUP number */
+#define	PKT_Link2Link		(PKT_Data+5)	/* Link 2 link number */
+#define	PKT_Link3Rup		(PKT_Data+6)	/* Link 3 RUP number */
+#define	PKT_Link3Link		(PKT_Data+7)	/* Link 3 link number */
+#define	PKT_Link4Rup		(PKT_Data+8)	/* Link 4 RUP number */
+#define	PKT_Link4Link		(PKT_Data+9)	/* Link 4 link number */
+#define	PKT_RtaVpdProm		(PKT_Data+10)	/* 32 bytes of RTA VPD PROM Contents */
+
+#endif				/* _sxwinif_h */
 
 /* End of RIOWINIF.H */