aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/watchdog/Kconfig
diff options
context:
space:
mode:
authorWim Van Sebroeck <wim@iguana.be>2007-08-17 08:38:02 +0000
committerWim Van Sebroeck <wim@iguana.be>2007-10-18 10:39:03 +0000
commitb7e04f8c61a46d742de23af5d7ca2b41b33e40ac (patch)
treec52a7ea568648e2d8ed0d423098b42298de2058b /drivers/char/watchdog/Kconfig
parentd85714d81cc0408daddb68c10f7fd69eafe7c213 (diff)
mv watchdog tree under drivers
move watchdog tree from drivers/char/watchdog to drivers/watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers/char/watchdog/Kconfig')
-rw-r--r--drivers/char/watchdog/Kconfig853
1 files changed, 0 insertions, 853 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
deleted file mode 100644
index 37bddc1802d..00000000000
--- a/drivers/char/watchdog/Kconfig
+++ /dev/null
@@ -1,853 +0,0 @@
-#
-# Watchdog device configuration
-#
-
-menuconfig WATCHDOG
- bool "Watchdog Timer Support"
- ---help---
- If you say Y here (and to one of the following options) and create a
- character special file /dev/watchdog with major number 10 and minor
- number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
- subsequently opening the file and then failing to write to it for
- longer than 1 minute will result in rebooting the machine. This
- could be useful for a networked machine that needs to come back
- on-line as fast as possible after a lock-up. There's both a watchdog
- implementation entirely in software (which can sometimes fail to
- reboot the machine) and a driver for hardware watchdog boards, which
- are more robust and can also keep track of the temperature inside
- your computer. For details, read <file:Documentation/watchdog/watchdog.txt>
- in the kernel source.
-
- The watchdog is usually used together with the watchdog daemon
- which is available from
- <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
- also monitor NFS connections and can reboot the machine when the process
- table is full.
-
- If unsure, say N.
-
-if WATCHDOG
-
-config WATCHDOG_NOWAYOUT
- bool "Disable watchdog shutdown on close"
- help
- The default watchdog behaviour (which you get if you say N here) is
- to stop the timer if the process managing it closes the file
- /dev/watchdog. It's always remotely possible that this process might
- get killed. If you say Y here, the watchdog cannot be stopped once
- it has been started.
-
-#
-# General Watchdog drivers
-#
-
-comment "Watchdog Device Drivers"
-
-# Architecture Independent
-
-config SOFT_WATCHDOG
- tristate "Software watchdog"
- help
- A software monitoring watchdog. This will fail to reboot your system
- from some situations that the hardware watchdog will recover
- from. Equally it's a lot cheaper to install.
-
- To compile this driver as a module, choose M here: the
- module will be called softdog.
-
-# ALPHA Architecture
-
-# ARM Architecture
-
-config AT91RM9200_WATCHDOG
- tristate "AT91RM9200 watchdog"
- depends on ARCH_AT91RM9200
- help
- Watchdog timer embedded into AT91RM9200 chips. This will reboot your
- system when the timeout is reached.
-
-config 21285_WATCHDOG
- tristate "DC21285 watchdog"
- depends on FOOTBRIDGE
- help
- The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
- here if you wish to use this. Alternatively say M to compile the
- driver as a module, which will be called wdt285.
-
- This driver does not work on all machines. In particular, early CATS
- boards have hardware problems that will cause the machine to simply
- lock up if the watchdog fires.
-
- "If in doubt, leave it out" - say N.
-
-config 977_WATCHDOG
- tristate "NetWinder WB83C977 watchdog"
- depends on FOOTBRIDGE && ARCH_NETWINDER
- help
- Say Y here to include support for the WB977 watchdog included in
- NetWinder machines. Alternatively say M to compile the driver as
- a module, which will be called wdt977.
-
- Not sure? It's safe to say N.
-
-config IXP2000_WATCHDOG
- tristate "IXP2000 Watchdog"
- depends on ARCH_IXP2000
- help
- Say Y here if to include support for the watchdog timer
- in the Intel IXP2000(2400, 2800, 2850) network processors.
- This driver can be built as a module by choosing M. The module
- will be called ixp2000_wdt.
-
- Say N if you are unsure.
-
-config IXP4XX_WATCHDOG
- tristate "IXP4xx Watchdog"
- depends on ARCH_IXP4XX
- help
- Say Y here if to include support for the watchdog timer
- in the Intel IXP4xx network processors. This driver can
- be built as a module by choosing M. The module will
- be called ixp4xx_wdt.
-
- Note: The internal IXP4xx watchdog does a soft CPU reset
- which doesn't reset any peripherals. There are circumstances
- where the watchdog will fail to reset the board correctly
- (e.g., if the boot ROM is in an unreadable state).
-
- Say N if you are unsure.
-
-config KS8695_WATCHDOG
- tristate "KS8695 watchdog"
- depends on ARCH_KS8695
- help
- Watchdog timer embedded into KS8695 processor. This will reboot your
- system when the timeout is reached.
-
-config S3C2410_WATCHDOG
- tristate "S3C2410 Watchdog"
- depends on ARCH_S3C2410
- help
- Watchdog timer block in the Samsung S3C2410 chips. This will
- reboot the system when the timer expires with the watchdog
- enabled.
-
- The driver is limited by the speed of the system's PCLK
- signal, so with reasonably fast systems (PCLK around 50-66MHz)
- then watchdog intervals of over approximately 20seconds are
- unavailable.
-
- The driver can be built as a module by choosing M, and will
- be called s3c2410_wdt
-
-config SA1100_WATCHDOG
- tristate "SA1100/PXA2xx watchdog"
- depends on ARCH_SA1100 || ARCH_PXA
- help
- Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
- reboot your system when timeout is reached.
-
- NOTE: once enabled, this timer cannot be disabled.
-
- To compile this driver as a module, choose M here: the
- module will be called sa1100_wdt.
-
-config MPCORE_WATCHDOG
- tristate "MPcore watchdog"
- depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS
- help
- Watchdog timer embedded into the MPcore system.
-
- To compile this driver as a module, choose M here: the
- module will be called mpcore_wdt.
-
-config EP93XX_WATCHDOG
- tristate "EP93xx Watchdog"
- depends on ARCH_EP93XX
- help
- Say Y here if to include support for the watchdog timer
- embedded in the Cirrus Logic EP93xx family of devices.
-
- To compile this driver as a module, choose M here: the
- module will be called ep93xx_wdt.
-
-config OMAP_WATCHDOG
- tristate "OMAP Watchdog"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
- help
- Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to
- enable the OMAP1610/OMAP1710 watchdog timer.
-
-config PNX4008_WATCHDOG
- tristate "PNX4008 Watchdog"
- depends on ARCH_PNX4008
- help
- Say Y here if to include support for the watchdog timer
- in the PNX4008 processor.
- This driver can be built as a module by choosing M. The module
- will be called pnx4008_wdt.
-
- Say N if you are unsure.
-
-config IOP_WATCHDOG
- tristate "IOP Watchdog"
- depends on PLAT_IOP
- select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
- help
- Say Y here if to include support for the watchdog timer
- in the Intel IOP3XX & IOP13XX I/O Processors. This driver can
- be built as a module by choosing M. The module will
- be called iop_wdt.
-
- Note: The IOP13XX watchdog does an Internal Bus Reset which will
- affect both cores and the peripherals of the IOP. The ATU-X
- and/or ATUe configuration registers will remain intact, but if
- operating as an Root Complex and/or Central Resource, the PCI-X
- and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER.
-
-config DAVINCI_WATCHDOG
- tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
- help
- Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
- To compile this driver as a module, choose M here: the
- module will be called davinci_wdt.
-
- NOTE: once enabled, this timer cannot be disabled.
- Say N if you are unsure.
-
-# ARM26 Architecture
-
-# AVR32 Architecture
-
-config AT32AP700X_WDT
- tristate "AT32AP700x watchdog"
- depends on CPU_AT32AP7000
- help
- Watchdog timer embedded into AT32AP700x devices. This will reboot
- your system when the timeout is reached.
-
-# BLACKFIN Architecture
-
-config BFIN_WDT
- tristate "Blackfin On-Chip Watchdog Timer"
- depends on BLACKFIN
- ---help---
- If you say yes here you will get support for the Blackfin On-Chip
- Watchdog Timer. If you have one of these processors and wish to
- have watchdog support enabled, say Y, otherwise say N.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_wdt.
-
-# CRIS Architecture
-
-# FRV Architecture
-
-# H8300 Architecture
-
-# X86 (i386 + ia64 + x86_64) Architecture
-
-config ACQUIRE_WDT
- tristate "Acquire SBC Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on Single Board
- Computers produced by Acquire Inc (and others). This watchdog
- simply watches your kernel to make sure it doesn't freeze, and if
- it does, it reboots your computer after a certain amount of time.
-
- To compile this driver as a module, choose M here: the
- module will be called acquirewdt.
-
- Most people will say N.
-
-config ADVANTECH_WDT
- tristate "Advantech SBC Watchdog Timer"
- depends on X86
- help
- If you are configuring a Linux kernel for the Advantech single-board
- computer, say `Y' here to support its built-in watchdog timer
- feature. More information can be found at
- <http://www.advantech.com.tw/products/>
-
-config ALIM1535_WDT
- tristate "ALi M1535 PMU Watchdog Timer"
- depends on X86 && PCI
- ---help---
- This is the driver for the hardware watchdog on the ALi M1535 PMU.
-
- To compile this driver as a module, choose M here: the
- module will be called alim1535_wdt.
-
- Most people will say N.
-
-config ALIM7101_WDT
- tristate "ALi M7101 PMU Computer Watchdog"
- depends on X86 && PCI
- help
- This is the driver for the hardware watchdog on the ALi M7101 PMU
- as used in the x86 Cobalt servers.
-
- To compile this driver as a module, choose M here: the
- module will be called alim7101_wdt.
-
- Most people will say N.
-
-config SC520_WDT
- tristate "AMD Elan SC520 processor Watchdog"
- depends on X86
- help
- This is the driver for the hardware watchdog built in to the
- AMD "Elan" SC520 microcomputer commonly used in embedded systems.
- This watchdog simply watches your kernel to make sure it doesn't
- freeze, and if it does, it reboots your computer after a certain
- amount of time.
-
- You can compile this driver directly into the kernel, or use
- it as a module. The module will be called sc520_wdt.
-
-config EUROTECH_WDT
- tristate "Eurotech CPU-1220/1410 Watchdog Timer"
- depends on X86
- help
- Enable support for the watchdog timer on the Eurotech CPU-1220 and
- CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
- information are at <http://www.eurotech.it/>.
-
-config IB700_WDT
- tristate "IB700 SBC Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the IB700 Single
- Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
- simply watches your kernel to make sure it doesn't freeze, and if
- it does, it reboots your computer after a certain amount of time.
-
- This driver is like the WDT501 driver but for slightly different hardware.
-
- To compile this driver as a module, choose M here: the
- module will be called ib700wdt.
-
- Most people will say N.
-
-config IBMASR
- tristate "IBM Automatic Server Restart"
- depends on X86
- help
- This is the driver for the IBM Automatic Server Restart watchdog
- timer built-in into some eServer xSeries machines.
-
- To compile this driver as a module, choose M here: the
- module will be called ibmasr.
-
-config WAFER_WDT
- tristate "ICP Wafer 5823 Single Board Computer Watchdog"
- depends on X86
- help
- This is a driver for the hardware watchdog on the ICP Wafer 5823
- Single Board Computer (and probably other similar models).
-
- To compile this driver as a module, choose M here: the
- module will be called wafer5823wdt.
-
-config I6300ESB_WDT
- tristate "Intel 6300ESB Timer/Watchdog"
- depends on X86 && PCI
- ---help---
- Hardware driver for the watchdog timer built into the Intel
- 6300ESB controller hub.
-
- To compile this driver as a module, choose M here: the
- module will be called i6300esb.
-
-config ITCO_WDT
- tristate "Intel TCO Timer/Watchdog"
- depends on (X86 || IA64) && PCI
- ---help---
- Hardware driver for the intel TCO timer based watchdog devices.
- These drivers are included in the Intel 82801 I/O Controller
- Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
- controller hub.
-
- The TCO (Total Cost of Ownership) timer is a watchdog timer
- that will reboot the machine after its second expiration. The
- expiration time can be configured with the "heartbeat" parameter.
-
- On some motherboards the driver may fail to reset the chipset's
- NO_REBOOT flag which prevents the watchdog from rebooting the
- machine. If this is the case you will get a kernel message like
- "failed to reset NO_REBOOT flag, reboot disabled by hardware".
-
- To compile this driver as a module, choose M here: the
- module will be called iTCO_wdt.
-
-config ITCO_VENDOR_SUPPORT
- bool "Intel TCO Timer/Watchdog Specific Vendor Support"
- depends on ITCO_WDT
- ---help---
- Add vendor specific support to the intel TCO timer based watchdog
- devices. At this moment we only have additional support for some
- SuperMicro Inc. motherboards.
-
-config SC1200_WDT
- tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
- depends on X86
- help
- This is a driver for National Semiconductor PC87307/PC97307 hardware
- watchdog cards as found on the SC1200. This watchdog is mainly used
- for power management purposes and can be used to power down the device
- during inactivity periods (includes interrupt activity monitoring).
-
- To compile this driver as a module, choose M here: the
- module will be called sc1200wdt.
-
- Most people will say N.
-
-config SCx200_WDT
- tristate "National Semiconductor SCx200 Watchdog"
- depends on SCx200 && PCI
- help
- Enable the built-in watchdog timer support on the National
- Semiconductor SCx200 processors.
-
- If compiled as a module, it will be called scx200_wdt.
-
-config PC87413_WDT
- tristate "NS PC87413 watchdog"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the PC87413 chipset
- This watchdog simply watches your kernel to make sure it doesn't
- freeze, and if it does, it reboots your computer after a certain
- amount of time.
-
- To compile this driver as a module, choose M here: the
- module will be called pc87413_wdt.
-
- Most people will say N.
-
-config 60XX_WDT
- tristate "SBC-60XX Watchdog Timer"
- depends on X86
- help
- This driver can be used with the watchdog timer found on some
- single board computers, namely the 6010 PII based computer.
- It may well work with other cards. It reads port 0x443 to enable
- and re-set the watchdog timer, and reads port 0x45 to disable
- the watchdog. If you have a card that behave in similar ways,
- you can probably make this driver work with your card as well.
-
- You can compile this driver directly into the kernel, or use
- it as a module. The module will be called sbc60xxwdt.
-
-config SBC8360_WDT
- tristate "SBC8360 Watchdog Timer"
- depends on X86
- ---help---
-
- This is the driver for the hardware watchdog on the SBC8360 Single
- Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
-
- To compile this driver as a module, choose M here: the
- module will be called sbc8360.ko.
-
- Most people will say N.
-
-config CPU5_WDT
- tristate "SMA CPU5 Watchdog"
- depends on X86
- ---help---
- TBD.
- To compile this driver as a module, choose M here: the
- module will be called cpu5wdt.
-
-config SMSC37B787_WDT
- tristate "Winbond SMsC37B787 Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog component on the
- Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
- from Vision Systems and maybe others.
-
- This watchdog simply watches your kernel to make sure it doesn't
- freeze, and if it does, it reboots your computer after a certain
- amount of time.
-
- Usually a userspace daemon will notify the kernel WDT driver that
- userspace is still alive, at regular intervals.
-
- To compile this driver as a module, choose M here: the
- module will be called smsc37b787_wdt.
-
- Most people will say N.
-
-config W83627HF_WDT
- tristate "W83627HF Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the W83627HF chipset
- as used in Advantech PC-9578 and Tyan S2721-533 motherboards
- (and likely others). This watchdog simply watches your kernel to
- make sure it doesn't freeze, and if it does, it reboots your computer
- after a certain amount of time.
-
- To compile this driver as a module, choose M here: the
- module will be called w83627hf_wdt.
-
- Most people will say N.
-
-config W83697HF_WDT
- tristate "W83697HF/W83697HG Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the W83697HF/HG
- chipset as used in Dedibox/VIA motherboards (and likely others).
- This watchdog simply watches your kernel to make sure it doesn't
- freeze, and if it does, it reboots your computer after a certain
- amount of time.
-
- To compile this driver as a module, choose M here: the
- module will be called w83697hf_wdt.
-
- Most people will say N.
-
-config W83877F_WDT
- tristate "W83877F (EMACS) Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the W83877F chipset
- as used in EMACS PC-104 motherboards (and likely others). This
- watchdog simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time.
-
- To compile this driver as a module, choose M here: the
- module will be called w83877f_wdt.
-
- Most people will say N.
-
-config W83977F_WDT
- tristate "W83977F (PCM-5335) Watchdog Timer"
- depends on X86
- ---help---
- This is the driver for the hardware watchdog on the W83977F I/O chip
- as used in AAEON's PCM-5335 SBC (and likely others). This
- watchdog simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time.
-
- To compile this driver as a module, choose M here: the
- module will be called w83977f_wdt.
-
-config MACHZ_WDT
- tristate "ZF MachZ Watchdog"
- depends on X86
- ---help---
- If you are using a ZF Micro MachZ processor, say Y here, otherwise
- N. This is the driver for the watchdog timer built-in on that
- processor using ZF-Logic interface. This watchdog simply watches
- your kernel to make sure it doesn't freeze, and if it does, it
- reboots your computer after a certain amount of time.
-
- To compile this driver as a module, choose M here: the
- module will be called machzwd.
-
-config SBC_EPX_C3_WATCHDOG
- tristate "Winsystems SBC EPX-C3 watchdog"
- depends on X86
- ---help---
- This is the driver for the built-in watchdog timer on the EPX-C3
- Single-board computer made by Winsystems, Inc.
-
- *Note*: This hardware watchdog is not probeable and thus there
- is no way to know if writing to its IO address will corrupt
- your system or have any real effect. The only way to be sure
- that this driver does what you want is to make sure you
- are running it on an EPX-C3 from Winsystems with the watchdog
- timer at IO address 0x1ee and 0x1ef. It will write to both those
- IO ports. Basically, the assumption is made that if you compile
- this driver into your kernel and/or load it as a module, that you
- know what you are doing and that you are in fact running on an
- EPX-C3 board!
-
- To compile this driver as a module, choose M here: the
- module will be called sbc_epx_c3.
-
-# M32R Architecture
-
-# M68K Architecture
-
-# M68KNOMMU Architecture
-
-# MIPS Architecture
-
-config INDYDOG
- tristate "Indy/I2 Hardware Watchdog"
- depends on SGI_IP22
- help
- Hardware driver for the Indy's/I2's watchdog. This is a
- watchdog timer that will reboot the machine after a 60 second
- timer expired and no process has written to /dev/watchdog during
- that time.
-
-config WDT_MTX1
- tristate "MTX-1 Hardware Watchdog"
- depends on MIPS_MTX1
- help
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
-config WDT_RM9K_GPI
- tristate "RM9000/GPI hardware watchdog"
- depends on CPU_RM9000
- help
- Watchdog implementation using the GPI hardware found on
- PMC-Sierra RM9xxx CPUs.
-
- To compile this driver as a module, choose M here: the
- module will be called rm9k_wdt.
-
-# PARISC Architecture
-
-# POWERPC Architecture
-
-config MPC5200_WDT
- tristate "MPC5200 Watchdog Timer"
- depends on PPC_MPC52xx
-
-config 8xx_WDT
- tristate "MPC8xx Watchdog Timer"
- depends on 8xx
-
-config 83xx_WDT
- tristate "MPC83xx Watchdog Timer"
- depends on PPC_83xx
-
-config MV64X60_WDT
- tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
- depends on MV64X60
-
-config BOOKE_WDT
- bool "PowerPC Book-E Watchdog Timer"
- depends on BOOKE || 4xx
- ---help---
- Please see Documentation/watchdog/watchdog-api.txt for
- more information.
-
-# PPC64 Architecture
-
-config WATCHDOG_RTAS
- tristate "RTAS watchdog"
- depends on PPC_RTAS
- help
- This driver adds watchdog support for the RTAS watchdog.
-
- To compile this driver as a module, choose M here. The module
- will be called wdrtas.
-
-# S390 Architecture
-
-config ZVM_WATCHDOG
- tristate "z/VM Watchdog Timer"
- depends on S390
- help
- IBM s/390 and zSeries machines running under z/VM 5.1 or later
- provide a virtual watchdog timer to their guest that cause a
- user define Control Program command to be executed after a
- timeout.
-
- To compile this driver as a module, choose M here. The module
- will be called vmwatchdog.
-
-# SUPERH (sh + sh64) Architecture
-
-config SH_WDT
- tristate "SuperH Watchdog"
- depends on SUPERH && (CPU_SH3 || CPU_SH4)
- help
- This driver adds watchdog support for the integrated watchdog in the
- SuperH processors. If you have one of these processors and wish
- to have watchdog support enabled, say Y, otherwise say N.
-
- As a side note, saying Y here will automatically boost HZ to 1000
- so that the timer has a chance to clear the overflow counter. On
- slower systems (such as the SH-2 and SH-3) this will likely yield
- some performance issues. As such, the WDT should be avoided here
- unless it is absolutely necessary.
-
- To compile this driver as a module, choose M here: the
- module will be called shwdt.
-
-config SH_WDT_MMAP
- bool "Allow mmap of SH WDT"
- default n
- depends on SH_WDT
- help
- If you say Y here, user applications will be able to mmap the
- WDT/CPG registers.
-
-# SPARC Architecture
-
-# SPARC64 Architecture
-
-config WATCHDOG_CP1XXX
- tristate "CP1XXX Hardware Watchdog support"
- depends on SPARC64 && PCI
- ---help---
- This is the driver for the hardware watchdog timers present on
- Sun Microsystems CompactPCI models CP1400 and CP1500.
-
- To compile this driver as a module, choose M here: the
- module will be called cpwatchdog.
-
- If you do not have a CompactPCI model CP1400 or CP1500, or
- another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
- you should say N to this option.
-
-config WATCHDOG_RIO
- tristate "RIO Hardware Watchdog support"
- depends on SPARC64 && PCI
- help
- Say Y here to support the hardware watchdog capability on Sun RIO
- machines. The watchdog timeout period is normally one minute but
- can be changed with a boot-time parameter.
-
-# V850 Architecture
-
-# XTENSA Architecture
-
-#
-# ISA-based Watchdog Cards
-#
-
-comment "ISA-based Watchdog Cards"
- depends on ISA
-
-config PCWATCHDOG
- tristate "Berkshire Products ISA-PC Watchdog"
- depends on ISA
- ---help---
- This is the driver for the Berkshire Products ISA-PC Watchdog card.
- This card simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time. This driver is like the WDT501 driver but for different
- hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
- watchdog cards can be ordered from <http://www.berkprod.com/>.
-
- To compile this driver as a module, choose M here: the
- module will be called pcwd.
-
- Most people will say N.
-
-config MIXCOMWD
- tristate "Mixcom Watchdog"
- depends on ISA
- ---help---
- This is a driver for the Mixcom hardware watchdog cards. This
- watchdog simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time.
-
- To compile this driver as a module, choose M here: the
- module will be called mixcomwd.
-
- Most people will say N.
-
-config WDT
- tristate "WDT Watchdog timer"
- depends on ISA
- ---help---
- If you have a WDT500P or WDT501P watchdog board, say Y here,
- otherwise N. It is not possible to probe for this board, which means
- that you have to inform the kernel about the IO port and IRQ that
- is needed (you can do this via the io and irq parameters)
-
- To compile this driver as a module, choose M here: the
- module will be called wdt.
-
-config WDT_501
- bool "WDT501 features"
- depends on WDT
- help
- Saying Y here and creating a character special file /dev/temperature
- with major number 10 and minor number 131 ("man mknod") will give
- you a thermometer inside your computer: reading from
- /dev/temperature yields one byte, the temperature in degrees
- Fahrenheit. This works only if you have a WDT501P watchdog board
- installed.
-
- If you want to enable the Fan Tachometer on the WDT501P, then you
- can do this via the tachometer parameter. Only do this if you have a
- fan tachometer actually set up.
-
-#
-# PCI-based Watchdog Cards
-#
-
-comment "PCI-based Watchdog Cards"
- depends on PCI
-
-config PCIPCWATCHDOG
- tristate "Berkshire Products PCI-PC Watchdog"
- depends on PCI
- ---help---
- This is the driver for the Berkshire Products PCI-PC Watchdog card.
- This card simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time. The card can also monitor the internal temperature of the PC.
- More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
-
- To compile this driver as a module, choose M here: the
- module will be called pcwd_pci.
-
- Most people will say N.
-
-config WDTPCI
- tristate "PCI-WDT500/501 Watchdog timer"
- depends on PCI
- ---help---
- If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
-
- To compile this driver as a module, choose M here: the
- module will be called wdt_pci.
-
-config WDT_501_PCI
- bool "PCI-WDT501 features"
- depends on WDTPCI
- help
- Saying Y here and creating a character special file /dev/temperature
- with major number 10 and minor number 131 ("man mknod") will give
- you a thermometer inside your computer: reading from
- /dev/temperature yields one byte, the temperature in degrees
- Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
- installed.
-
- If you want to enable the Fan Tachometer on the PCI-WDT501, then you
- can do this via the tachometer parameter. Only do this if you have a
- fan tachometer actually set up.
-
-#
-# USB-based Watchdog Cards
-#
-
-comment "USB-based Watchdog Cards"
- depends on USB
-
-config USBPCWATCHDOG
- tristate "Berkshire Products USB-PC Watchdog"
- depends on USB
- ---help---
- This is the driver for the Berkshire Products USB-PC Watchdog card.
- This card simply watches your kernel to make sure it doesn't freeze,
- and if it does, it reboots your computer after a certain amount of
- time. The card can also monitor the internal temperature of the PC.
- More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
-
- To compile this driver as a module, choose M here: the
- module will be called pcwd_usb.
-
- Most people will say N.
-
-endif # WATCHDOG