aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2009-12-09 20:35:56 +0100
committerJean Delvare <khali@linux-fr.org>2009-12-09 20:35:56 +0100
commit2de1875a5894794b42fce3833cddf4eac55831de (patch)
tree3ef1865a45346904b796e4f9042858526b1873f9 /drivers/hwmon
parent3f8b845940c8344e88123bead66b5a871e6366df (diff)
hwmon: (w83792d) Clean up detect function
As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/w83792d.c61
1 files changed, 18 insertions, 43 deletions
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 2be16194ddf..38978851333 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1273,58 +1273,33 @@ w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info)
return -ENODEV;
}
- /* The w83792d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_BANK);
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- /* Check for Winbond ID if in bank 0 */
- if (!(val1 & 0x07)) { /* is Bank0 */
- if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
- ((val1 & 0x80) && (val2 != 0x5c))) {
- return -ENODEV;
- }
- }
- /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
- should match */
- if (w83792d_read_value(client,
- W83792D_REG_I2C_ADDR) != address) {
+ if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
+ return -ENODEV;
+
+ val1 = w83792d_read_value(client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) { /* is Bank0 */
+ if ((!(val1 & 0x80) && val2 != 0xa3) ||
+ ( (val1 & 0x80) && val2 != 0x5c))
return -ENODEV;
- }
}
+ /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
+ should match */
+ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
+ return -ENODEV;
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
w83792d_write_value(client,
W83792D_REG_BANK,
(w83792d_read_value(client,
W83792D_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
- if (val1 == 0x7a) {
- kind = w83792d;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev,
- "w83792d: Ignoring 'force' parameter for"
- " unknown chip at adapter %d, address"
- " 0x%02x\n", i2c_adapter_id(adapter),
- address);
- return -ENODEV;
- }
- }
+ val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ if (val1 != 0x7a || val2 != 0x5c)
+ return -ENODEV;
strlcpy(info->type, "w83792d", I2C_NAME_SIZE);