[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 795 deletions

diff --git a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c
deleted file mode 100644
index 29241469dcb..00000000000
--- a/drivers/i2c/chips/lm78.c
+++ /dev/null
@@ -1,795 +0,0 @@
-/*
-    lm78.c - Part of lm_sensors, Linux kernel modules for hardware
-             monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <asm/io.h>
-
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24,
-					0x25, 0x26, 0x27, 0x28, 0x29,
-					0x2a, 0x2b, 0x2c, 0x2d, 0x2e,
-					0x2f, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_3(lm78, lm78j, lm79);
-
-/* Many LM78 constants specified below */
-
-/* Length of ISA address segment */
-#define LM78_EXTENT 8
-
-/* Where are the ISA address/data registers relative to the base address */
-#define LM78_ADDR_REG_OFFSET 5
-#define LM78_DATA_REG_OFFSET 6
-
-/* The LM78 registers */
-#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2)
-#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2)
-#define LM78_REG_IN(nr) (0x20 + (nr))
-
-#define LM78_REG_FAN_MIN(nr) (0x3b + (nr))
-#define LM78_REG_FAN(nr) (0x28 + (nr))
-
-#define LM78_REG_TEMP 0x27
-#define LM78_REG_TEMP_OVER 0x39
-#define LM78_REG_TEMP_HYST 0x3a
-
-#define LM78_REG_ALARM1 0x41
-#define LM78_REG_ALARM2 0x42
-
-#define LM78_REG_VID_FANDIV 0x47
-
-#define LM78_REG_CONFIG 0x40
-#define LM78_REG_CHIPID 0x49
-#define LM78_REG_I2C_ADDR 0x48
-
-
-/* Conversions. Rounding and limit checking is only done on the TO_REG 
-   variants. */
-
-/* IN: mV, (0V to 4.08V)
-   REG: 16mV/bit */
-static inline u8 IN_TO_REG(unsigned long val)
-{
-	unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
-	return (nval + 8) / 16;
-}
-#define IN_FROM_REG(val) ((val) *  16)
-
-static inline u8 FAN_TO_REG(long rpm, int div)
-{
-	if (rpm <= 0)
-		return 255;
-	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
-}
-
-static inline int FAN_FROM_REG(u8 val, int div)
-{
-	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
-}
-
-/* TEMP: mC (-128C to +127C)
-   REG: 1C/bit, two's complement */
-static inline s8 TEMP_TO_REG(int val)
-{
-	int nval = SENSORS_LIMIT(val, -128000, 127000) ;
-	return nval<0 ? (nval-500)/1000 : (nval+500)/1000;
-}
-
-static inline int TEMP_FROM_REG(s8 val)
-{
-	return val * 1000;
-}
-
-/* VID: mV
-   REG: (see doc/vid) */
-static inline int VID_FROM_REG(u8 val)
-{
-	return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50;
-}
-
-#define DIV_FROM_REG(val) (1 << (val))
-
-/* There are some complications in a module like this. First off, LM78 chips
-   may be both present on the SMBus and the ISA bus, and we have to handle
-   those cases separately at some places. Second, there might be several
-   LM78 chips available (well, actually, that is probably never done; but
-   it is a clean illustration of how to handle a case like that). Finally,
-   a specific chip may be attached to *both* ISA and SMBus, and we would
-   not like to detect it double. Fortunately, in the case of the LM78 at
-   least, a register tells us what SMBus address we are on, so that helps
-   a bit - except if there could be more than one SMBus. Groan. No solution
-   for this yet. */
-
-/* This module may seem overly long and complicated. In fact, it is not so
-   bad. Quite a lot of bookkeeping is done. A real driver can often cut
-   some corners. */
-
-/* For each registered LM78, we need to keep some data in memory. That
-   data is pointed to by lm78_list[NR]->data. The structure itself is
-   dynamically allocated, at the same time when a new lm78 client is
-   allocated. */
-struct lm78_data {
-	struct i2c_client client;
-	struct semaphore lock;
-	enum chips type;
-
-	struct semaphore update_lock;
-	char valid;		/* !=0 if following fields are valid */
-	unsigned long last_updated;	/* In jiffies */
-
-	u8 in[7];		/* Register value */
-	u8 in_max[7];		/* Register value */
-	u8 in_min[7];		/* Register value */
-	u8 fan[3];		/* Register value */
-	u8 fan_min[3];		/* Register value */
-	s8 temp;		/* Register value */
-	s8 temp_over;		/* Register value */
-	s8 temp_hyst;		/* Register value */
-	u8 fan_div[3];		/* Register encoding, shifted right */
-	u8 vid;			/* Register encoding, combined */
-	u16 alarms;		/* Register encoding, combined */
-};
-
-
-static int lm78_attach_adapter(struct i2c_adapter *adapter);
-static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
-static int lm78_detach_client(struct i2c_client *client);
-
-static int lm78_read_value(struct i2c_client *client, u8 register);
-static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
-static struct lm78_data *lm78_update_device(struct device *dev);
-static void lm78_init_client(struct i2c_client *client);
-
-
-static struct i2c_driver lm78_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "lm78",
-	.id		= I2C_DRIVERID_LM78,
-	.flags		= I2C_DF_NOTIFY,
-	.attach_adapter	= lm78_attach_adapter,
-	.detach_client	= lm78_detach_client,
-};
-
-/* 7 Voltages */
-static ssize_t show_in(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
-}
-
-static ssize_t show_in_min(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
-}
-
-static ssize_t show_in_max(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
-}
-
-static ssize_t set_in_min(struct device *dev, const char *buf,
-		size_t count, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-
-	down(&data->update_lock);
-	data->in_min[nr] = IN_TO_REG(val);
-	lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]);
-	up(&data->update_lock);
-	return count;
-}
-
-static ssize_t set_in_max(struct device *dev, const char *buf,
-		size_t count, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-
-	down(&data->update_lock);
-	data->in_max[nr] = IN_TO_REG(val);
-	lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]);
-	up(&data->update_lock);
-	return count;
-}
-	
-#define show_in_offset(offset)					\
-static ssize_t							\
-	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
-{								\
-	return show_in(dev, buf, offset);			\
-}								\
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, 		\
-		show_in##offset, NULL);				\
-static ssize_t							\
-	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)   \
-{								\
-	return show_in_min(dev, buf, offset);			\
-}								\
-static ssize_t							\
-	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)   \
-{								\
-	return show_in_max(dev, buf, offset);			\
-}								\
-static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr,	\
-		const char *buf, size_t count)			\
-{								\
-	return set_in_min(dev, buf, count, offset);		\
-}								\
-static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr,	\
-		const char *buf, size_t count)			\
-{								\
-	return set_in_max(dev, buf, count, offset);		\
-}								\
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,		\
-		show_in##offset##_min, set_in##offset##_min);	\
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,		\
-		show_in##offset##_max, set_in##offset##_max);
-
-show_in_offset(0);
-show_in_offset(1);
-show_in_offset(2);
-show_in_offset(3);
-show_in_offset(4);
-show_in_offset(5);
-show_in_offset(6);
-
-/* Temperature */
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
-}
-
-static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
-}
-
-static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
-
-	down(&data->update_lock);
-	data->temp_over = TEMP_TO_REG(val);
-	lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over);
-	up(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
-}
-
-static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
-
-	down(&data->update_lock);
-	data->temp_hyst = TEMP_TO_REG(val);
-	lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst);
-	up(&data->update_lock);
-	return count;
-}
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
-		show_temp_over, set_temp_over);
-static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
-		show_temp_hyst, set_temp_hyst);
-
-/* 3 Fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
-		DIV_FROM_REG(data->fan_div[nr])) );
-}
-
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
-		DIV_FROM_REG(data->fan_div[nr])) );
-}
-
-static ssize_t set_fan_min(struct device *dev, const char *buf,
-		size_t count, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-
-	down(&data->update_lock);
-	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
-	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
-}
-
-/* Note: we save and restore the fan minimum here, because its value is
-   determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
-   because the divisor changed. */
-static ssize_t set_fan_div(struct device *dev, const char *buf,
-	size_t count, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-	unsigned long min;
-	u8 reg;
-
-	down(&data->update_lock);
-	min = FAN_FROM_REG(data->fan_min[nr],
-			   DIV_FROM_REG(data->fan_div[nr]));
-
-	switch (val) {
-	case 1: data->fan_div[nr] = 0; break;
-	case 2: data->fan_div[nr] = 1; break;
-	case 4: data->fan_div[nr] = 2; break;
-	case 8: data->fan_div[nr] = 3; break;
-	default:
-		dev_err(&client->dev, "fan_div value %ld not "
-			"supported. Choose one of 1, 2, 4 or 8!\n", val);
-		up(&data->update_lock);
-		return -EINVAL;
-	}
-
-	reg = lm78_read_value(client, LM78_REG_VID_FANDIV);
-	switch (nr) {
-	case 0:
-		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
-		break;
-	case 1:
-		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
-		break;
-	}
-	lm78_write_value(client, LM78_REG_VID_FANDIV, reg);
-
-	data->fan_min[nr] =
-		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
-	lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
-	up(&data->update_lock);
-
-	return count;
-}
-
-#define show_fan_offset(offset)						\
-static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
-{									\
-	return show_fan(dev, buf, offset - 1);				\
-}									\
-static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)  \
-{									\
-	return show_fan_min(dev, buf, offset - 1);			\
-}									\
-static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)  \
-{									\
-	return show_fan_div(dev, buf, offset - 1);			\
-}									\
-static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr,		\
-		const char *buf, size_t count)				\
-{									\
-	return set_fan_min(dev, buf, count, offset - 1);		\
-}									\
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
-		show_fan_##offset##_min, set_fan_##offset##_min);
-
-static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf,
-		size_t count)
-{
-	return set_fan_div(dev, buf, count, 0) ;
-}
-
-static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf,
-		size_t count)
-{
-	return set_fan_div(dev, buf, count, 1) ;
-}
-
-show_fan_offset(1);
-show_fan_offset(2);
-show_fan_offset(3);
-
-/* Fan 3 divisor is locked in H/W */
-static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
-		show_fan_1_div, set_fan_1_div);
-static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
-		show_fan_2_div, set_fan_2_div);
-static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL);
-
-/* VID */
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
-}
-static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
-
-/* Alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct lm78_data *data = lm78_update_device(dev);
-	return sprintf(buf, "%u\n", data->alarms);
-}
-static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-
-/* This function is called when:
-     * lm78_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and lm78_driver is still present) */
-static int lm78_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_detect(adapter, &addr_data, lm78_detect);
-}
-
-/* This function is called by i2c_detect */
-int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	int i, err;
-	struct i2c_client *new_client;
-	struct lm78_data *data;
-	const char *client_name = "";
-	int is_isa = i2c_is_isa_adapter(adapter);
-
-	if (!is_isa &&
-	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		err = -ENODEV;
-		goto ERROR0;
-	}
-
-	/* Reserve the ISA region */
-	if (is_isa)
-		if (!request_region(address, LM78_EXTENT, lm78_driver.name)) {
-			err = -EBUSY;
-			goto ERROR0;
-		}
-
-	/* Probe whether there is anything available on this address. Already
-	   done for SMBus clients */
-	if (kind < 0) {
-		if (is_isa) {
-
-#define REALLY_SLOW_IO
-			/* We need the timeouts for at least some LM78-like
-			   chips. But only if we read 'undefined' registers. */
-			i = inb_p(address + 1);
-			if (inb_p(address + 2) != i) {
-				err = -ENODEV;
-				goto ERROR1;
-			}
-			if (inb_p(address + 3) != i) {
-				err = -ENODEV;
-				goto ERROR1;
-			}
-			if (inb_p(address + 7) != i) {
-				err = -ENODEV;
-				goto ERROR1;
-			}
-#undef REALLY_SLOW_IO
-
-			/* Let's just hope nothing breaks here */
-			i = inb_p(address + 5) & 0x7f;
-			outb_p(~i & 0x7f, address + 5);
-			if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
-				outb_p(i, address + 5);
-				err = -ENODEV;
-				goto ERROR1;
-			}
-		}
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm78_{read,write}_value. */
-
-	if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto ERROR1;
-	}
-	memset(data, 0, sizeof(struct lm78_data));
-
-	new_client = &data->client;
-	if (is_isa)
-		init_MUTEX(&data->lock);
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm78_driver;
-	new_client->flags = 0;
-
-	/* Now, we do the remaining detection. */
-	if (kind < 0) {
-		if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) {
-			err = -ENODEV;
-			goto ERROR2;
-		}
-		if (!is_isa && (lm78_read_value(
-				new_client, LM78_REG_I2C_ADDR) != address)) {
-			err = -ENODEV;
-			goto ERROR2;
-		}
-	}
-
-	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = lm78_read_value(new_client, LM78_REG_CHIPID);
-		if (i == 0x00 || i == 0x20)
-			kind = lm78;
-		else if (i == 0x40)
-			kind = lm78j;
-		else if ((i & 0xfe) == 0xc0)
-			kind = lm79;
-		else {
-			if (kind == 0)
-				dev_warn(&adapter->dev, "Ignoring 'force' "
-					"parameter for unknown chip at "
-					"adapter %d, address 0x%02x\n",
-					i2c_adapter_id(adapter), address);
-			err = -ENODEV;
-			goto ERROR2;
-		}
-	}
-
-	if (kind == lm78) {
-		client_name = "lm78";
-	} else if (kind == lm78j) {
-		client_name = "lm78-j";
-	} else if (kind == lm79) {
-		client_name = "lm79";
-	}
-
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
-	data->type = kind;
-
-	data->valid = 0;
-	init_MUTEX(&data->update_lock);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto ERROR2;
-
-	/* Initialize the LM78 chip */
-	lm78_init_client(new_client);
-
-	/* A few vars need to be filled upon startup */
-	for (i = 0; i < 3; i++) {
-		data->fan_min[i] = lm78_read_value(new_client,
-					LM78_REG_FAN_MIN(i));
-	}
-
-	/* Register sysfs hooks */
-	device_create_file(&new_client->dev, &dev_attr_in0_input);
-	device_create_file(&new_client->dev, &dev_attr_in0_min);
-	device_create_file(&new_client->dev, &dev_attr_in0_max);
-	device_create_file(&new_client->dev, &dev_attr_in1_input);
-	device_create_file(&new_client->dev, &dev_attr_in1_min);
-	device_create_file(&new_client->dev, &dev_attr_in1_max);
-	device_create_file(&new_client->dev, &dev_attr_in2_input);
-	device_create_file(&new_client->dev, &dev_attr_in2_min);
-	device_create_file(&new_client->dev, &dev_attr_in2_max);
-	device_create_file(&new_client->dev, &dev_attr_in3_input);
-	device_create_file(&new_client->dev, &dev_attr_in3_min);
-	device_create_file(&new_client->dev, &dev_attr_in3_max);
-	device_create_file(&new_client->dev, &dev_attr_in4_input);
-	device_create_file(&new_client->dev, &dev_attr_in4_min);
-	device_create_file(&new_client->dev, &dev_attr_in4_max);
-	device_create_file(&new_client->dev, &dev_attr_in5_input);
-	device_create_file(&new_client->dev, &dev_attr_in5_min);
-	device_create_file(&new_client->dev, &dev_attr_in5_max);
-	device_create_file(&new_client->dev, &dev_attr_in6_input);
-	device_create_file(&new_client->dev, &dev_attr_in6_min);
-	device_create_file(&new_client->dev, &dev_attr_in6_max);
-	device_create_file(&new_client->dev, &dev_attr_temp1_input);
-	device_create_file(&new_client->dev, &dev_attr_temp1_max);
-	device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
-	device_create_file(&new_client->dev, &dev_attr_fan1_input);
-	device_create_file(&new_client->dev, &dev_attr_fan1_min);
-	device_create_file(&new_client->dev, &dev_attr_fan1_div);
-	device_create_file(&new_client->dev, &dev_attr_fan2_input);
-	device_create_file(&new_client->dev, &dev_attr_fan2_min);
-	device_create_file(&new_client->dev, &dev_attr_fan2_div);
-	device_create_file(&new_client->dev, &dev_attr_fan3_input);
-	device_create_file(&new_client->dev, &dev_attr_fan3_min);
-	device_create_file(&new_client->dev, &dev_attr_fan3_div);
-	device_create_file(&new_client->dev, &dev_attr_alarms);
-	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
-
-	return 0;
-
-ERROR2:
-	kfree(data);
-ERROR1:
-	if (is_isa)
-		release_region(address, LM78_EXTENT);
-ERROR0:
-	return err;
-}
-
-static int lm78_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	if ((err = i2c_detach_client(client))) {
-		dev_err(&client->dev,
-		    "Client deregistration failed, client not detached.\n");
-		return err;
-	}
-
-	if(i2c_is_isa_client(client))
-		release_region(client->addr, LM78_EXTENT);
-
-	kfree(i2c_get_clientdata(client));
-
-	return 0;
-}
-
-/* The SMBus locks itself, but ISA access must be locked explicitly! 
-   We don't want to lock the whole ISA bus, so we lock each client
-   separately.
-   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
-   would slow down the LM78 access and should not be necessary.  */
-static int lm78_read_value(struct i2c_client *client, u8 reg)
-{
-	int res;
-	if (i2c_is_isa_client(client)) {
-		struct lm78_data *data = i2c_get_clientdata(client);
-		down(&data->lock);
-		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
-		res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
-		up(&data->lock);
-		return res;
-	} else
-		return i2c_smbus_read_byte_data(client, reg);
-}
-
-/* The SMBus locks itself, but ISA access muse be locked explicitly! 
-   We don't want to lock the whole ISA bus, so we lock each client
-   separately.
-   We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
-   would slow down the LM78 access and should not be necessary. 
-   There are some ugly typecasts here, but the good new is - they should
-   nowhere else be necessary! */
-static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
-	if (i2c_is_isa_client(client)) {
-		struct lm78_data *data = i2c_get_clientdata(client);
-		down(&data->lock);
-		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
-		outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
-		up(&data->lock);
-		return 0;
-	} else
-		return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new LM78. It should set limits, etc. */
-static void lm78_init_client(struct i2c_client *client)
-{
-	u8 config = lm78_read_value(client, LM78_REG_CONFIG);
-
-	/* Start monitoring */
-	if (!(config & 0x01))
-		lm78_write_value(client, LM78_REG_CONFIG,
-				 (config & 0xf7) | 0x01);
-}
-
-static struct lm78_data *lm78_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm78_data *data = i2c_get_clientdata(client);
-	int i;
-
-	down(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
-
-		dev_dbg(&client->dev, "Starting lm78 update\n");
-
-		for (i = 0; i <= 6; i++) {
-			data->in[i] =
-			    lm78_read_value(client, LM78_REG_IN(i));
-			data->in_min[i] =
-			    lm78_read_value(client, LM78_REG_IN_MIN(i));
-			data->in_max[i] =
-			    lm78_read_value(client, LM78_REG_IN_MAX(i));
-		}
-		for (i = 0; i < 3; i++) {
-			data->fan[i] =
-			    lm78_read_value(client, LM78_REG_FAN(i));
-			data->fan_min[i] =
-			    lm78_read_value(client, LM78_REG_FAN_MIN(i));
-		}
-		data->temp = lm78_read_value(client, LM78_REG_TEMP);
-		data->temp_over =
-		    lm78_read_value(client, LM78_REG_TEMP_OVER);
-		data->temp_hyst =
-		    lm78_read_value(client, LM78_REG_TEMP_HYST);
-		i = lm78_read_value(client, LM78_REG_VID_FANDIV);
-		data->vid = i & 0x0f;
-		if (data->type == lm79)
-			data->vid |=
-			    (lm78_read_value(client, LM78_REG_CHIPID) &
-			     0x01) << 4;
-		else
-			data->vid |= 0x10;
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = i >> 6;
-		data->alarms = lm78_read_value(client, LM78_REG_ALARM1) +
-		    (lm78_read_value(client, LM78_REG_ALARM2) << 8);
-		data->last_updated = jiffies;
-		data->valid = 1;
-
-		data->fan_div[2] = 1;
-	}
-
-	up(&data->update_lock);
-
-	return data;
-}
-
-static int __init sm_lm78_init(void)
-{
-	return i2c_add_driver(&lm78_driver);
-}
-
-static void __exit sm_lm78_exit(void)
-{
-	i2c_del_driver(&lm78_driver);
-}
-
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
-MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver");
-MODULE_LICENSE("GPL");
-
-module_init(sm_lm78_init);
-module_exit(sm_lm78_exit);