Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add driver for Atmel AT42QT2160 Sensor Chip
  Input: max7359 - use threaded IRQs
  Input: add driver for Maxim MAX7359 key switch controller
  Input: add driver for ADP5588 QWERTY I2C Keypad
  Input: add touchscreen driver for MELFAS MCS-5000 controller
  Input: add driver for OpenCores Keyboard Controller
  Input: dm355evm_keys - remove dm355evm_keys_hardirq
  Input: synaptics_i2c - switch to using __cancel_delayed_work()
  Input: ad7879 - add support for AD7889
  Input: atkbd - rely on input core to restore state on resume
  Input: add generic suspend and resume for input devices
  Input: libps2 - additional locking for i8042 ports

4 files changed, 337 insertions, 5 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ab02d72afbf..8cc453c85ea 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -48,8 +48,8 @@ config TOUCHSCREEN_AD7879_I2C
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  AD7879-1 controller, and your board-specific initialization
-	  code includes that in its table of I2C devices.
+	  AD7879-1/AD7889-1 controller, and your board-specific
+	  initialization code includes that in its table of I2C devices.
 
 	  If unsure, say N (but it's safe to say "Y").
 
@@ -62,7 +62,7 @@ config TOUCHSCREEN_AD7879_SPI
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  AD7879 controller, and your board-specific initialization
+	  AD7879/AD7889 controller, and your board-specific initialization
 	  code includes that in its table of SPI devices.
 
 	  If unsure, say N (but it's safe to say "Y").
@@ -169,6 +169,17 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+config TOUCHSCREEN_MCS5000
+	tristate "MELFAS MCS-5000 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs5000_ts.
 
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 4599bf7ad81..15fa62cffc7 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
+obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 19b4db7e974..f06332c9e21 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -1,7 +1,8 @@
 /*
- * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc.
  *
- * Description:	AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ * Description:	AD7879/AD7889 based touchscreen, and GPIO driver
+ *		(I2C/SPI Interface)
  *
  * Bugs:        Enter bugs at http://blackfin.uclinux.org/
  *
@@ -747,6 +748,7 @@ static int __devexit ad7879_remove(struct i2c_client *client)
 
 static const struct i2c_device_id ad7879_id[] = {
 	{ "ad7879", 0 },
+	{ "ad7889", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ad7879_id);
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
new file mode 100644
index 00000000000..4c28b89757f
--- /dev/null
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -0,0 +1,318 @@
+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs5000_ts.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS		0x00
+#define STATUS_OFFSET			0
+#define STATUS_NO			(0 << STATUS_OFFSET)
+#define STATUS_INIT			(1 << STATUS_OFFSET)
+#define STATUS_SENSING			(2 << STATUS_OFFSET)
+#define STATUS_COORD			(3 << STATUS_OFFSET)
+#define STATUS_GESTURE			(4 << STATUS_OFFSET)
+#define ERROR_OFFSET			4
+#define ERROR_NO			(0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET		(1 << ERROR_OFFSET)
+#define ERROR_INT_RESET			(2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET			(3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS	(8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE		(9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE		0x01
+#define RESET_OFFSET			0
+#define RESET_NO			(0 << RESET_OFFSET)
+#define RESET_EXT_SOFT			(1 << RESET_OFFSET)
+#define OP_MODE_OFFSET			1
+#define OP_MODE_SLEEP			(0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE			(1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET			4
+#define GESTURE_DISABLE			(0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE			(1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET		5
+#define PROXIMITY_DISABLE		(0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE		(1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET		6
+#define SCAN_MODE_INTERRUPT		(0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING		(1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET		7
+#define REPORT_RATE_40			(0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80			(1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL		0x02
+#define MCS5000_TS_FILTER_CTL		0x03
+#define PRI_FILTER_OFFSET		0
+#define SEC_FILTER_OFFSET		4
+
+#define MCS5000_TS_X_SIZE_UPPER		0x08
+#define MCS5000_TS_X_SIZE_LOWER		0x09
+#define MCS5000_TS_Y_SIZE_UPPER		0x0A
+#define MCS5000_TS_Y_SIZE_LOWER		0x0B
+
+#define MCS5000_TS_INPUT_INFO		0x10
+#define INPUT_TYPE_OFFSET		0
+#define INPUT_TYPE_NONTOUCH		(0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE		(1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL			(2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM			(3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY		(7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET		3
+#define GESTURE_CODE_NO			(0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER		0x11
+#define MCS5000_TS_X_POS_LOWER		0x12
+#define MCS5000_TS_Y_POS_UPPER		0x13
+#define MCS5000_TS_Y_POS_LOWER		0x14
+#define MCS5000_TS_Z_POS		0x15
+#define MCS5000_TS_WIDTH		0x16
+#define MCS5000_TS_GESTURE_VAL		0x17
+#define MCS5000_TS_MODULE_REV		0x20
+#define MCS5000_TS_FIRMWARE_VER		0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC			0x3ff
+#define MCS5000_MAX_YC			0x3ff
+
+enum mcs5000_ts_read_offset {
+	READ_INPUT_INFO,
+	READ_X_POS_UPPER,
+	READ_X_POS_LOWER,
+	READ_Y_POS_UPPER,
+	READ_Y_POS_LOWER,
+	READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct mcs5000_ts_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+	struct mcs5000_ts_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	u8 buffer[READ_BLOCK_SIZE];
+	int err;
+	int x;
+	int y;
+
+	err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+			READ_BLOCK_SIZE, buffer);
+	if (err < 0) {
+		dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+		goto out;
+	}
+
+	switch (buffer[READ_INPUT_INFO]) {
+	case INPUT_TYPE_NONTOUCH:
+		input_report_key(data->input_dev, BTN_TOUCH, 0);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_SINGLE:
+		x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+		y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+		input_report_key(data->input_dev, BTN_TOUCH, 1);
+		input_report_abs(data->input_dev, ABS_X, x);
+		input_report_abs(data->input_dev, ABS_Y, y);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_DUAL:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PALM:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PROXIMITY:
+		/* TODO */
+		break;
+
+	default:
+		dev_err(&client->dev, "Unknown ts input type %d\n",
+				buffer[READ_INPUT_INFO]);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
+{
+	const struct mcs5000_ts_platform_data *platform_data =
+		data->platform_data;
+	struct i2c_client *client = data->client;
+
+	/* Touch reset & sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+			RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+	/* Touch size */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+			platform_data->x_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+			platform_data->x_size & 0xff);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+			platform_data->y_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+			platform_data->y_size & 0xff);
+
+	/* Touch active mode & 80 report rate */
+	i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+			OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int __devinit mcs5000_ts_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct mcs5000_ts_data *data;
+	struct input_dev *input_dev;
+	int ret;
+
+	if (!client->dev.platform_data)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		ret = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->platform_data = client->dev.platform_data;
+
+	input_dev->name = "MELPAS MCS-5000 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	if (data->platform_data->cfg_pin)
+		data->platform_data->cfg_pin();
+
+	ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	ret = input_register_device(data->input_dev);
+	if (ret < 0)
+		goto err_free_irq;
+
+	mcs5000_ts_phys_init(data);
+	i2c_set_clientdata(client, data);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return ret;
+}
+
+static int __devexit mcs5000_ts_remove(struct i2c_client *client)
+{
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	/* Touch sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+	return 0;
+}
+
+static int mcs5000_ts_resume(struct i2c_client *client)
+{
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+	mcs5000_ts_phys_init(data);
+
+	return 0;
+}
+#else
+#define mcs5000_ts_suspend	NULL
+#define mcs5000_ts_resume	NULL
+#endif
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+	{ "mcs5000_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+	.probe		= mcs5000_ts_probe,
+	.remove		= __devexit_p(mcs5000_ts_remove),
+	.suspend	= mcs5000_ts_suspend,
+	.resume		= mcs5000_ts_resume,
+	.driver = {
+		.name = "mcs5000_ts",
+	},
+	.id_table	= mcs5000_ts_id,
+};
+
+static int __init mcs5000_ts_init(void)
+{
+	return i2c_add_driver(&mcs5000_ts_driver);
+}
+
+static void __exit mcs5000_ts_exit(void)
+{
+	i2c_del_driver(&mcs5000_ts_driver);
+}
+
+module_init(mcs5000_ts_init);
+module_exit(mcs5000_ts_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");