aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/cinergyT2/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/media/dvb/cinergyT2/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/media/dvb/cinergyT2/Kconfig')
-rw-r--r--drivers/media/dvb/cinergyT2/Kconfig85
1 files changed, 85 insertions, 0 deletions
diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
new file mode 100644
index 00000000000..226714085f5
--- /dev/null
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -0,0 +1,85 @@
+config DVB_CINERGYT2
+ tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
+ depends on DVB_CORE && USB
+ help
+ Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+ Say Y if you own such a device and want to use it.
+
+
+config DVB_CINERGYT2_TUNING
+ bool "sophisticated fine-tuning for CinergyT2 cards"
+ depends on DVB_CINERGYT2
+ help
+ Here you can fine-tune some parameters of the CinergyT2 driver.
+
+ Normally you don't need to touch this, but in exotic setups you
+ may fine-tune your setup and adjust e.g. DMA buffer sizes for
+ a particular application.
+
+
+config DVB_CINERGYT2_STREAM_URB_COUNT
+ int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
+ depends on DVB_CINERGYT2_TUNING
+ default "32"
+ help
+ USB Request Blocks for Highspeed Stream transfers are scheduled in
+ a queue for the Host Controller.
+
+ Usually the default value is a safe choice.
+
+ You may increase this number if you are using this device in a
+ Server Environment with many high-traffic USB Highspeed devices
+ sharing the same USB bus.
+
+
+config DVB_CINERGYT2_STREAM_BUF_SIZE
+ int "Size of URB Stream Buffers for Highspeed Transfers"
+ depends on DVB_CINERGYT2_TUNING
+ default "512"
+ help
+ Should be a multiple of native buffer size of 512 bytes.
+ Default value is a safe choice.
+
+ You may increase this number if you are using this device in a
+ Server Environment with many high-traffic USB Highspeed devices
+ sharing the same USB bus.
+
+
+config DVB_CINERGYT2_QUERY_INTERVAL
+ int "Status update interval [milliseconds]"
+ depends on DVB_CINERGYT2_TUNING
+ default "250"
+ help
+ This is the interval for status readouts from the demodulator.
+ You may try lower values if you need more responsive signal quality
+ measurements.
+
+ Please keep in mind that these updates cause traffic on the tuner
+ control bus and thus may or may not affect receiption sensitivity.
+
+ The default value should be a safe choice for common applications.
+
+
+config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+ bool "Register the onboard IR Remote Control Receiver as Input Device"
+ depends on DVB_CINERGYT2_TUNING
+ default "yes"
+ help
+ Enable this option if you want to use the onboard Infrared Remote
+ Control Receiver as Linux-Input device.
+
+ Right now only the keycode table for the default Remote Control
+ delivered with the device is supported, please see the driver
+ source code to find out how to add support for other controls.
+
+
+config DVB_CINERGYT2_RC_QUERY_INTERVAL
+ int "Infrared Remote Controller update interval [milliseconds]"
+ depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+ default "100"
+ help
+ If you have a very fast-repeating remote control you can try lower
+ values, for normal consumer receivers the default value should be
+ a safe choice.
+