aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/dvb-usb/Kconfig
diff options
context:
space:
mode:
authorAntti Palosaari <crope@iki.fi>2006-11-05 16:05:38 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2007-02-21 13:35:30 -0200
commit5decdd2729066c5c155d0f6e7fdf89b844fbfc27 (patch)
tree8f5fcf1db45402f7c4247cb34aa9802a891fffb7 /drivers/media/dvb/dvb-usb/Kconfig
parent4131fd4fd40aa22cfe61b4e7c78e640b9fcfcd8c (diff)
V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T
This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar as used in MSI Megasky GL861. Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is also supported by hw but I cannot test it due to lack of USB 1.1 port. Device supports only isochronous mode transfers. There is also eeprom in usb controller(at least in address range 0x80 - 0xbf) for storing data, eg. firmware. Anyway, firmware loading is not used / required by the device. There seems to be at least one unknown I2C device in address 0xa0, probably remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07 from this unknown address. Driver is based on gl861 module. Tuner has a lot of problems to lock with megasky qt1010 module with this hardware with some broadcasting standards. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb/dvb-usb/Kconfig')
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig7
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index ca8258ef5e6..6cbbaade73a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -128,6 +128,13 @@ config DVB_USB_GL861
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
receiver with USB ID 0db0:5581.
+config DVB_USB_AU6610
+ tristate "Alcor Micro AU6610 USB2.0 support"
+ depends on DVB_USB
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
+
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB