V4L/DVB(7767): Move tuners to common/tuners

There were several issues in the past, caused by the hybrid tuner design, since
now, the same tuner can be used by drivers/media/dvb and drivers/media/video.

Kconfig items were rearranged, to split V4L/DVB core from their drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 0 insertions, 964 deletions

diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c
deleted file mode 100644
index 43d35bdb221..00000000000
--- a/drivers/media/dvb/frontends/xc5000.c
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
- *
- *  Copyright (c) 2007 Xceive Corporation
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/dvb/frontend.h>
-#include <linux/i2c.h>
-
-#include "dvb_frontend.h"
-
-#include "xc5000.h"
-#include "xc5000_priv.h"
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
-
-#define dprintk(level,fmt, arg...) if (debug >= level) \
-	printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
-
-#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
-#define XC5000_DEFAULT_FIRMWARE_SIZE 12332
-
-/* Misc Defines */
-#define MAX_TV_STANDARD			23
-#define XC_MAX_I2C_WRITE_LENGTH		64
-
-/* Signal Types */
-#define XC_RF_MODE_AIR			0
-#define XC_RF_MODE_CABLE		1
-
-/* Result codes */
-#define XC_RESULT_SUCCESS		0
-#define XC_RESULT_RESET_FAILURE		1
-#define XC_RESULT_I2C_WRITE_FAILURE	2
-#define XC_RESULT_I2C_READ_FAILURE	3
-#define XC_RESULT_OUT_OF_RANGE		5
-
-/* Product id */
-#define XC_PRODUCT_ID_FW_NOT_LOADED	0x2000
-#define XC_PRODUCT_ID_FW_LOADED 	0x1388
-
-/* Registers */
-#define XREG_INIT         0x00
-#define XREG_VIDEO_MODE   0x01
-#define XREG_AUDIO_MODE   0x02
-#define XREG_RF_FREQ      0x03
-#define XREG_D_CODE       0x04
-#define XREG_IF_OUT       0x05
-#define XREG_SEEK_MODE    0x07
-#define XREG_POWER_DOWN   0x0A
-#define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
-#define XREG_SMOOTHEDCVBS 0x0E
-#define XREG_XTALFREQ     0x0F
-#define XREG_FINERFFREQ   0x10
-#define XREG_DDIMODE      0x11
-
-#define XREG_ADC_ENV      0x00
-#define XREG_QUALITY      0x01
-#define XREG_FRAME_LINES  0x02
-#define XREG_HSYNC_FREQ   0x03
-#define XREG_LOCK         0x04
-#define XREG_FREQ_ERROR   0x05
-#define XREG_SNR          0x06
-#define XREG_VERSION      0x07
-#define XREG_PRODUCT_ID   0x08
-#define XREG_BUSY         0x09
-
-/*
-   Basic firmware description. This will remain with
-   the driver for documentation purposes.
-
-   This represents an I2C firmware file encoded as a
-   string of unsigned char. Format is as follows:
-
-   char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
-   char[1  ]=len0_LSB  -> length of first write transaction
-   char[2  ]=data0 -> first byte to be sent
-   char[3  ]=data1
-   char[4  ]=data2
-   char[   ]=...
-   char[M  ]=dataN  -> last byte to be sent
-   char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
-   char[M+2]=len1_LSB  -> length of second write transaction
-   char[M+3]=data0
-   char[M+4]=data1
-   ...
-   etc.
-
-   The [len] value should be interpreted as follows:
-
-   len= len_MSB _ len_LSB
-   len=1111_1111_1111_1111   : End of I2C_SEQUENCE
-   len=0000_0000_0000_0000   : Reset command: Do hardware reset
-   len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
-   len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
-
-   For the RESET and WAIT commands, the two following bytes will contain
-   immediately the length of the following transaction.
-
-*/
-typedef struct {
-	char *Name;
-	u16 AudioMode;
-	u16 VideoMode;
-} XC_TV_STANDARD;
-
-/* Tuner standards */
-#define MN_NTSC_PAL_BTSC	0
-#define MN_NTSC_PAL_A2		1
-#define MN_NTSC_PAL_EIAJ	2
-#define MN_NTSC_PAL_Mono	3
-#define BG_PAL_A2		4
-#define BG_PAL_NICAM		5
-#define BG_PAL_MONO		6
-#define I_PAL_NICAM		7
-#define I_PAL_NICAM_MONO	8
-#define DK_PAL_A2		9
-#define DK_PAL_NICAM		10
-#define DK_PAL_MONO		11
-#define DK_SECAM_A2DK1		12
-#define DK_SECAM_A2LDK3 	13
-#define DK_SECAM_A2MONO 	14
-#define L_SECAM_NICAM		15
-#define LC_SECAM_NICAM		16
-#define DTV6			17
-#define DTV8			18
-#define DTV7_8			19
-#define DTV7			20
-#define FM_Radio_INPUT2 	21
-#define FM_Radio_INPUT1 	22
-
-static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
-	{"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
-	{"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
-	{"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
-	{"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
-	{"B/G-PAL-A2",        0x0A00, 0x8049},
-	{"B/G-PAL-NICAM",     0x0C04, 0x8049},
-	{"B/G-PAL-MONO",      0x0878, 0x8059},
-	{"I-PAL-NICAM",       0x1080, 0x8009},
-	{"I-PAL-NICAM-MONO",  0x0E78, 0x8009},
-	{"D/K-PAL-A2",        0x1600, 0x8009},
-	{"D/K-PAL-NICAM",     0x0E80, 0x8009},
-	{"D/K-PAL-MONO",      0x1478, 0x8009},
-	{"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
-	{"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009},
-	{"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
-	{"L-SECAM-NICAM",     0x8E82, 0x0009},
-	{"L'-SECAM-NICAM",    0x8E82, 0x4009},
-	{"DTV6",              0x00C0, 0x8002},
-	{"DTV8",              0x00C0, 0x800B},
-	{"DTV7/8",            0x00C0, 0x801B},
-	{"DTV7",              0x00C0, 0x8007},
-	{"FM Radio-INPUT2",   0x9802, 0x9002},
-	{"FM Radio-INPUT1",   0x0208, 0x9002}
-};
-
-static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
-static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
-static void xc5000_TunerReset(struct dvb_frontend *fe);
-
-static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
-{
-	return xc5000_writeregs(priv, buf, len)
-		? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS;
-}
-
-static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
-{
-	return xc5000_readregs(priv, buf, len)
-		? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS;
-}
-
-static int xc_reset(struct dvb_frontend *fe)
-{
-	xc5000_TunerReset(fe);
-	return XC_RESULT_SUCCESS;
-}
-
-static void xc_wait(int wait_ms)
-{
-	msleep(wait_ms);
-}
-
-static void xc5000_TunerReset(struct dvb_frontend *fe)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	int ret;
-
-	dprintk(1, "%s()\n", __func__);
-
-	if (priv->cfg->tuner_callback) {
-		ret = priv->cfg->tuner_callback(priv->cfg->priv,
-						XC5000_TUNER_RESET, 0);
-		if (ret)
-			printk(KERN_ERR "xc5000: reset failed\n");
-	} else
-		printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
-}
-
-static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
-{
-	u8 buf[4];
-	int WatchDogTimer = 5;
-	int result;
-
-	buf[0] = (regAddr >> 8) & 0xFF;
-	buf[1] = regAddr & 0xFF;
-	buf[2] = (i2cData >> 8) & 0xFF;
-	buf[3] = i2cData & 0xFF;
-	result = xc_send_i2c_data(priv, buf, 4);
-	if (result == XC_RESULT_SUCCESS) {
-		/* wait for busy flag to clear */
-		while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
-			buf[0] = 0;
-			buf[1] = XREG_BUSY;
-
-			result = xc_send_i2c_data(priv, buf, 2);
-			if (result == XC_RESULT_SUCCESS) {
-				result = xc_read_i2c_data(priv, buf, 2);
-				if (result == XC_RESULT_SUCCESS) {
-					if ((buf[0] == 0) && (buf[1] == 0)) {
-						/* busy flag cleared */
-					break;
-					} else {
-						xc_wait(100); /* wait 5 ms */
-						WatchDogTimer--;
-					}
-				}
-			}
-		}
-	}
-	if (WatchDogTimer < 0)
-		result = XC_RESULT_I2C_WRITE_FAILURE;
-
-	return result;
-}
-
-static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData)
-{
-	u8 buf[2];
-	int result;
-
-	buf[0] = (regAddr >> 8) & 0xFF;
-	buf[1] = regAddr & 0xFF;
-	result = xc_send_i2c_data(priv, buf, 2);
-	if (result != XC_RESULT_SUCCESS)
-		return result;
-
-	result = xc_read_i2c_data(priv, buf, 2);
-	if (result != XC_RESULT_SUCCESS)
-		return result;
-
-	*i2cData = buf[0] * 256 + buf[1];
-	return result;
-}
-
-static int xc_load_i2c_sequence(struct dvb_frontend *fe, u8 i2c_sequence[])
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-
-	int i, nbytes_to_send, result;
-	unsigned int len, pos, index;
-	u8 buf[XC_MAX_I2C_WRITE_LENGTH];
-
-	index=0;
-	while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) {
-		len = i2c_sequence[index]* 256 + i2c_sequence[index+1];
-		if (len == 0x0000) {
-			/* RESET command */
-			result = xc_reset(fe);
-			index += 2;
-			if (result != XC_RESULT_SUCCESS)
-				return result;
-		} else if (len & 0x8000) {
-			/* WAIT command */
-			xc_wait(len & 0x7FFF);
-			index += 2;
-		} else {
-			/* Send i2c data whilst ensuring individual transactions
-			 * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
-			 */
-			index += 2;
-			buf[0] = i2c_sequence[index];
-			buf[1] = i2c_sequence[index + 1];
-			pos = 2;
-			while (pos < len) {
-				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) {
-					nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH;
-				} else {
-					nbytes_to_send = (len - pos + 2);
-				}
-				for (i=2; i<nbytes_to_send; i++) {
-					buf[i] = i2c_sequence[index + pos + i - 2];
-				}
-				result = xc_send_i2c_data(priv, buf, nbytes_to_send);
-
-				if (result != XC_RESULT_SUCCESS)
-					return result;
-
-				pos += nbytes_to_send - 2;
-			}
-			index += len;
-		}
-	}
-	return XC_RESULT_SUCCESS;
-}
-
-static int xc_initialize(struct xc5000_priv *priv)
-{
-	dprintk(1, "%s()\n", __func__);
-	return xc_write_reg(priv, XREG_INIT, 0);
-}
-
-static int xc_SetTVStandard(struct xc5000_priv *priv,
-	u16 VideoMode, u16 AudioMode)
-{
-	int ret;
-	dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
-	dprintk(1, "%s() Standard = %s\n",
-		__func__,
-		XC5000_Standard[priv->video_standard].Name);
-
-	ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
-	if (ret == XC_RESULT_SUCCESS)
-		ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
-
-	return ret;
-}
-
-static int xc_shutdown(struct xc5000_priv *priv)
-{
-	return 0;
-	/* Fixme: cannot bring tuner back alive once shutdown
-	 *        without reloading the driver modules.
-	 *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
-	 */
-}
-
-static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
-{
-	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
-		rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
-
-	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE))
-	{
-		rf_mode = XC_RF_MODE_CABLE;
-		printk(KERN_ERR
-			"%s(), Invalid mode, defaulting to CABLE",
-			__func__);
-	}
-	return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
-}
-
-static const struct dvb_tuner_ops xc5000_tuner_ops;
-
-static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
-{
-	u16 freq_code;
-
-	dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
-	if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
-		(freq_hz < xc5000_tuner_ops.info.frequency_min))
-		return XC_RESULT_OUT_OF_RANGE;
-
-	freq_code = (u16)(freq_hz / 15625);
-
-	return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
-}
-
-
-static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
-{
-	u32 freq_code = (freq_khz * 1024)/1000;
-	dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
-		__func__, freq_khz, freq_code);
-
-	return xc_write_reg(priv, XREG_IF_OUT, freq_code);
-}
-
-
-static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
-{
-	return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope);
-}
-
-static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
-{
-	int result;
-	u16 regData;
-	u32 tmp;
-
-	result = xc_read_reg(priv, XREG_FREQ_ERROR, &regData);
-	if (result)
-		return result;
-
-	tmp = (u32)regData;
-	(*freq_error_hz) = (tmp * 15625) / 1000;
-	return result;
-}
-
-static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
-{
-	return xc_read_reg(priv, XREG_LOCK, lock_status);
-}
-
-static int xc_get_version(struct xc5000_priv *priv,
-	u8 *hw_majorversion, u8 *hw_minorversion,
-	u8 *fw_majorversion, u8 *fw_minorversion)
-{
-	u16 data;
-	int result;
-
-	result = xc_read_reg(priv, XREG_VERSION, &data);
-	if (result)
-		return result;
-
-	(*hw_majorversion) = (data >> 12) & 0x0F;
-	(*hw_minorversion) = (data >>  8) & 0x0F;
-	(*fw_majorversion) = (data >>  4) & 0x0F;
-	(*fw_minorversion) = data & 0x0F;
-
-	return 0;
-}
-
-static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
-{
-	u16 regData;
-	int result;
-
-	result = xc_read_reg(priv, XREG_HSYNC_FREQ, &regData);
-	if (result)
-		return result;
-
-	(*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
-	return result;
-}
-
-static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
-{
-	return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines);
-}
-
-static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
-{
-	return xc_read_reg(priv, XREG_QUALITY, quality);
-}
-
-static u16 WaitForLock(struct xc5000_priv *priv)
-{
-	u16 lockState = 0;
-	int watchDogCount = 40;
-
-	while ((lockState == 0) && (watchDogCount > 0)) {
-		xc_get_lock_status(priv, &lockState);
-		if (lockState != 1) {
-			xc_wait(5);
-			watchDogCount--;
-		}
-	}
-	return lockState;
-}
-
-static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
-{
-	int found = 0;
-
-	dprintk(1, "%s(%u)\n", __func__, freq_hz);
-
-	if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
-		return 0;
-
-	if (WaitForLock(priv) == 1)
-		found = 1;
-
-	return found;
-}
-
-static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
-{
-	u8 buf[2] = { reg >> 8, reg & 0xff };
-	u8 bval[2] = { 0, 0 };
-	struct i2c_msg msg[2] = {
-		{ .addr = priv->cfg->i2c_address,
-			.flags = 0, .buf = &buf[0], .len = 2 },
-		{ .addr = priv->cfg->i2c_address,
-			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
-	};
-
-	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
-		printk(KERN_WARNING "xc5000: I2C read failed\n");
-		return -EREMOTEIO;
-	}
-
-	*val = (bval[0] << 8) | bval[1];
-	return 0;
-}
-
-static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
-		.flags = 0, .buf = buf, .len = len };
-
-	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
-		printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
-			(int)len);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
-		.flags = I2C_M_RD, .buf = buf, .len = len };
-
-	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
-		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int xc5000_fwupload(struct dvb_frontend* fe)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	const struct firmware *fw;
-	int ret;
-
-	/* request the firmware, this will block and timeout */
-	printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
-		XC5000_DEFAULT_FIRMWARE);
-
-	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev);
-	if (ret) {
-		printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
-		ret = XC_RESULT_RESET_FAILURE;
-		goto out;
-	} else {
-		printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n",
-		       fw->size);
-		ret = XC_RESULT_SUCCESS;
-	}
-
-	if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) {
-		printk(KERN_ERR "xc5000: firmware incorrect size\n");
-		ret = XC_RESULT_RESET_FAILURE;
-	} else {
-		printk(KERN_INFO "xc5000: firmware upload\n");
-		ret = xc_load_i2c_sequence(fe,  fw->data );
-	}
-
-out:
-	release_firmware(fw);
-	return ret;
-}
-
-static void xc_debug_dump(struct xc5000_priv *priv)
-{
-	u16 adc_envelope;
-	u32 freq_error_hz = 0;
-	u16 lock_status;
-	u32 hsync_freq_hz = 0;
-	u16 frame_lines;
-	u16 quality;
-	u8 hw_majorversion = 0, hw_minorversion = 0;
-	u8 fw_majorversion = 0, fw_minorversion = 0;
-
-	/* Wait for stats to stabilize.
-	 * Frame Lines needs two frame times after initial lock
-	 * before it is valid.
-	 */
-	xc_wait(100);
-
-	xc_get_ADC_Envelope(priv,  &adc_envelope);
-	dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
-
-	xc_get_frequency_error(priv, &freq_error_hz);
-	dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
-
-	xc_get_lock_status(priv,  &lock_status);
-	dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
-		lock_status);
-
-	xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
-		&fw_majorversion, &fw_minorversion);
-	dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
-		hw_majorversion, hw_minorversion,
-		fw_majorversion, fw_minorversion);
-
-	xc_get_hsync_freq(priv,  &hsync_freq_hz);
-	dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
-
-	xc_get_frame_lines(priv,  &frame_lines);
-	dprintk(1, "*** Frame lines = %d\n", frame_lines);
-
-	xc_get_quality(priv,  &quality);
-	dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
-}
-
-static int xc5000_set_params(struct dvb_frontend *fe,
-	struct dvb_frontend_parameters *params)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	int ret;
-
-	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
-
-	switch(params->u.vsb.modulation) {
-	case VSB_8:
-	case VSB_16:
-		dprintk(1, "%s() VSB modulation\n", __func__);
-		priv->rf_mode = XC_RF_MODE_AIR;
-		priv->freq_hz = params->frequency - 1750000;
-		priv->bandwidth = BANDWIDTH_6_MHZ;
-		priv->video_standard = DTV6;
-		break;
-	case QAM_64:
-	case QAM_256:
-	case QAM_AUTO:
-		dprintk(1, "%s() QAM modulation\n", __func__);
-		priv->rf_mode = XC_RF_MODE_CABLE;
-		priv->freq_hz = params->frequency - 1750000;
-		priv->bandwidth = BANDWIDTH_6_MHZ;
-		priv->video_standard = DTV6;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dprintk(1, "%s() frequency=%d (compensated)\n",
-		__func__, priv->freq_hz);
-
-	ret = xc_SetSignalSource(priv, priv->rf_mode);
-	if (ret != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR
-			"xc5000: xc_SetSignalSource(%d) failed\n",
-			priv->rf_mode);
-		return -EREMOTEIO;
-	}
-
-	ret = xc_SetTVStandard(priv,
-		XC5000_Standard[priv->video_standard].VideoMode,
-		XC5000_Standard[priv->video_standard].AudioMode);
-	if (ret != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
-		return -EREMOTEIO;
-	}
-
-	ret = xc_set_IF_frequency(priv, priv->cfg->if_khz);
-	if (ret != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
-			priv->cfg->if_khz);
-		return -EIO;
-	}
-
-	xc_tune_channel(priv, priv->freq_hz);
-
-	if (debug)
-		xc_debug_dump(priv);
-
-	return 0;
-}
-
-static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
-
-static int xc5000_set_analog_params(struct dvb_frontend *fe,
-	struct analog_parameters *params)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	int ret;
-
-	if(priv->fwloaded == 0)
-		xc_load_fw_and_init_tuner(fe);
-
-	dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
-		__func__, params->frequency);
-
-	priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */
-
-	/* params->frequency is in units of 62.5khz */
-	priv->freq_hz = params->frequency * 62500;
-
-	/* FIX ME: Some video standards may have several possible audio
-		   standards. We simply default to one of them here.
-	 */
-	if(params->std & V4L2_STD_MN) {
-		/* default to BTSC audio standard */
-		priv->video_standard = MN_NTSC_PAL_BTSC;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_PAL_BG) {
-		/* default to NICAM audio standard */
-		priv->video_standard = BG_PAL_NICAM;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_PAL_I) {
-		/* default to NICAM audio standard */
-		priv->video_standard = I_PAL_NICAM;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_PAL_DK) {
-		/* default to NICAM audio standard */
-		priv->video_standard = DK_PAL_NICAM;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_SECAM_DK) {
-		/* default to A2 DK1 audio standard */
-		priv->video_standard = DK_SECAM_A2DK1;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_SECAM_L) {
-		priv->video_standard = L_SECAM_NICAM;
-		goto tune_channel;
-	}
-
-	if(params->std & V4L2_STD_SECAM_LC) {
-		priv->video_standard = LC_SECAM_NICAM;
-		goto tune_channel;
-	}
-
-tune_channel:
-	ret = xc_SetSignalSource(priv, priv->rf_mode);
-	if (ret != XC_RESULT_SUCCESS) {
-	printk(KERN_ERR
-			"xc5000: xc_SetSignalSource(%d) failed\n",
-			priv->rf_mode);
-		return -EREMOTEIO;
-	}
-
-	ret = xc_SetTVStandard(priv,
-		XC5000_Standard[priv->video_standard].VideoMode,
-		XC5000_Standard[priv->video_standard].AudioMode);
-	if (ret != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
-		return -EREMOTEIO;
-	}
-
-	xc_tune_channel(priv, priv->freq_hz);
-
-	if (debug)
-		xc_debug_dump(priv);
-
-	return 0;
-}
-
-static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	dprintk(1, "%s()\n", __func__);
-	*freq = priv->freq_hz;
-	return 0;
-}
-
-static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	dprintk(1, "%s()\n", __func__);
-
-	*bw = priv->bandwidth;
-	return 0;
-}
-
-static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	u16 lock_status = 0;
-
-	xc_get_lock_status(priv, &lock_status);
-
-	dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
-
-	*status = lock_status;
-
-	return 0;
-}
-
-static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	int ret = 0;
-
-	if (priv->fwloaded == 0) {
-		ret = xc5000_fwupload(fe);
-		if (ret != XC_RESULT_SUCCESS)
-			return ret;
-		priv->fwloaded = 1;
-	}
-
-	/* Start the tuner self-calibration process */
-	ret |= xc_initialize(priv);
-
-	/* Wait for calibration to complete.
-	 * We could continue but XC5000 will clock stretch subsequent
-	 * I2C transactions until calibration is complete.  This way we
-	 * don't have to rely on clock stretching working.
-	 */
-	xc_wait( 100 );
-
-	/* Default to "CABLE" mode */
-	ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
-
-	return ret;
-}
-
-static int xc5000_sleep(struct dvb_frontend *fe)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	int ret;
-
-	dprintk(1, "%s()\n", __func__);
-
-	/* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized
-	 * once shutdown without reloading the driver. Maybe I am not
-	 * doing something right.
-	 *
-	 */
-
-	ret = xc_shutdown(priv);
-	if(ret != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR
-			"xc5000: %s() unable to shutdown tuner\n",
-			__func__);
-		return -EREMOTEIO;
-	}
-	else {
-		/* priv->fwloaded = 0; */
-		return XC_RESULT_SUCCESS;
-	}
-}
-
-static int xc5000_init(struct dvb_frontend *fe)
-{
-	struct xc5000_priv *priv = fe->tuner_priv;
-	dprintk(1, "%s()\n", __func__);
-
-	if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
-		printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
-		return -EREMOTEIO;
-	}
-
-	if (debug)
-		xc_debug_dump(priv);
-
-	return 0;
-}
-
-static int xc5000_release(struct dvb_frontend *fe)
-{
-	dprintk(1, "%s()\n", __func__);
-	kfree(fe->tuner_priv);
-	fe->tuner_priv = NULL;
-	return 0;
-}
-
-static const struct dvb_tuner_ops xc5000_tuner_ops = {
-	.info = {
-		.name           = "Xceive XC5000",
-		.frequency_min  =    1000000,
-		.frequency_max  = 1023000000,
-		.frequency_step =      50000,
-	},
-
-	.release	   = xc5000_release,
-	.init		   = xc5000_init,
-	.sleep		   = xc5000_sleep,
-
-	.set_params	   = xc5000_set_params,
-	.set_analog_params = xc5000_set_analog_params,
-	.get_frequency	   = xc5000_get_frequency,
-	.get_bandwidth	   = xc5000_get_bandwidth,
-	.get_status	   = xc5000_get_status
-};
-
-struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe,
-	struct i2c_adapter *i2c,
-	struct xc5000_config *cfg)
-{
-	struct xc5000_priv *priv = NULL;
-	u16 id = 0;
-
-	dprintk(1, "%s()\n", __func__);
-
-	priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
-
-	priv->cfg = cfg;
-	priv->bandwidth = BANDWIDTH_6_MHZ;
-	priv->i2c = i2c;
-
-	/* Check if firmware has been loaded. It is possible that another
-	   instance of the driver has loaded the firmware.
-	 */
-	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) {
-		kfree(priv);
-		return NULL;
-	}
-
-	switch(id) {
-	case XC_PRODUCT_ID_FW_LOADED:
-		printk(KERN_INFO
-			"xc5000: Successfully identified at address 0x%02x\n",
-			cfg->i2c_address);
-		printk(KERN_INFO
-			"xc5000: Firmware has been loaded previously\n");
-		priv->fwloaded = 1;
-		break;
-	case XC_PRODUCT_ID_FW_NOT_LOADED:
-		printk(KERN_INFO
-			"xc5000: Successfully identified at address 0x%02x\n",
-			cfg->i2c_address);
-		printk(KERN_INFO
-			"xc5000: Firmware has not been loaded previously\n");
-		priv->fwloaded = 0;
-		break;
-	default:
-		printk(KERN_ERR
-			"xc5000: Device not found at addr 0x%02x (0x%x)\n",
-			cfg->i2c_address, id);
-		kfree(priv);
-		return NULL;
-	}
-
-	memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
-		sizeof(struct dvb_tuner_ops));
-
-	fe->tuner_priv = priv;
-
-	return fe;
-}
-EXPORT_SYMBOL(xc5000_attach);
-
-MODULE_AUTHOR("Steven Toth");
-MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
-MODULE_LICENSE("GPL");