Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.

20 files changed, 5304 insertions, 998 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dead61754ad..dc6f2579f85 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -26,18 +26,31 @@ config MMC_PXA
 
 config MMC_SDHCI
 	tristate "Secure Digital Host Controller Interface support"
-	depends on PCI
+	depends on HAS_DMA
 	help
-	  This select the generic Secure Digital Host Controller Interface.
+	  This selects the generic Secure Digital Host Controller Interface.
 	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
 	  and Toshiba(R). Most controllers found in laptops are of this type.
+
+	  If you have a controller with this interface, say Y or M here. You
+	  also need to enable an appropriate bus interface.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_PCI
+	tristate "SDHCI support on PCI bus"
+	depends on MMC_SDHCI && PCI
+	help
+	  This selects the PCI Secure Digital Host Controller Interface.
+	  Most controllers found today are PCI devices.
+
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
 
 config MMC_RICOH_MMC
 	tristate "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL && MMC_SDHCI
+	depends on MMC_SDHCI_PCI
 	help
 	  This selects the disabler for the Ricoh MMC Controller. This
 	  proprietary controller is unnecessary because the SDHCI driver
@@ -91,6 +104,16 @@ config MMC_AT91
 
 	  If unsure, say N.
 
+config MMC_ATMELMCI
+	tristate "Atmel Multimedia Card Interface support"
+	depends on AVR32
+	help
+	  This selects the Atmel Multimedia Card Interface driver. If
+	  you have an AT32 (AVR32) platform with a Multimedia Card
+	  slot, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
 	depends on ARCH_IMX
@@ -130,3 +153,24 @@ config MMC_SPI
 
 	  If unsure, or if your system has no SPI master driver, say N.
 
+config MMC_S3C
+	tristate "Samsung S3C SD/MMC Card Interface support"
+	depends on ARCH_S3C2410 && MMC
+	help
+	  This selects a driver for the MCI interface found in
+          Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
+	  If you have a board based on one of those and a MMC/SD
+	  slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDRICOH_CS
+	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MMC && PCI && PCMCIA
+	help
+	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
+	  card whenever you insert a MMC or SD card into the card slot.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sdricoh_cs.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3877c87e6da..db52eebfb50 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -10,11 +10,15 @@ obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
+obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
+obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 8979ad330a4..f15e2064305 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -125,9 +125,72 @@ struct at91mci_host
 
 	/* Latest in the scatterlist that has been enabled for transfer */
 	int transfer_index;
+
+	/* Timer for timeouts */
+	struct timer_list timer;
 };
 
 /*
+ * Reset the controller and restore most of the state
+ */
+static void at91_reset_host(struct at91mci_host *host)
+{
+	unsigned long flags;
+	u32 mr;
+	u32 sdcr;
+	u32 dtor;
+	u32 imr;
+
+	local_irq_save(flags);
+	imr = at91_mci_read(host, AT91_MCI_IMR);
+
+	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+
+	/* save current state */
+	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
+	sdcr = at91_mci_read(host, AT91_MCI_SDCR);
+	dtor = at91_mci_read(host, AT91_MCI_DTOR);
+
+	/* reset the controller */
+	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+
+	/* restore state */
+	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
+	at91_mci_write(host, AT91_MCI_MR, mr);
+	at91_mci_write(host, AT91_MCI_SDCR, sdcr);
+	at91_mci_write(host, AT91_MCI_DTOR, dtor);
+	at91_mci_write(host, AT91_MCI_IER, imr);
+
+	/* make sure sdio interrupts will fire */
+	at91_mci_read(host, AT91_MCI_SR);
+
+	local_irq_restore(flags);
+}
+
+static void at91_timeout_timer(unsigned long data)
+{
+	struct at91mci_host *host;
+
+	host = (struct at91mci_host *)data;
+
+	if (host->request) {
+		dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
+
+		if (host->cmd && host->cmd->data) {
+			host->cmd->data->error = -ETIMEDOUT;
+		} else {
+			if (host->cmd)
+				host->cmd->error = -ETIMEDOUT;
+			else
+				host->request->cmd->error = -ETIMEDOUT;
+		}
+
+		at91_reset_host(host);
+		mmc_request_done(host->mmc, host->request);
+	}
+}
+
+/*
  * Copy from sg to a dma block - used for transfers
  */
 static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
@@ -135,9 +198,14 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
 	unsigned int len, i, size;
 	unsigned *dmabuf = host->buffer;
 
-	size = host->total_length;
+	size = data->blksz * data->blocks;
 	len = data->sg_len;
 
+	/* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */
+	if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+		if (host->total_length == 12)
+			memset(dmabuf, 0, 12);
+
 	/*
 	 * Just loop through all entries. Size might not
 	 * be the entire list though so make sure that
@@ -159,9 +227,10 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
 
 			for (index = 0; index < (amount / 4); index++)
 				*dmabuf++ = swab32(sgbuffer[index]);
-		}
-		else
+		} else {
 			memcpy(dmabuf, sgbuffer, amount);
+			dmabuf += amount;
+		}
 
 		kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
 
@@ -233,11 +302,11 @@ static void at91_mci_pre_dma_read(struct at91mci_host *host)
 
 		if (i == 0) {
 			at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
-			at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
 		}
 		else {
 			at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
-			at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
 		}
 	}
 
@@ -277,8 +346,6 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
 
 		dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
 
-		data->bytes_xfered += sg->length;
-
 		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
 			unsigned int *buffer;
 			int index;
@@ -294,6 +361,8 @@ static void at91_mci_post_dma_read(struct at91mci_host *host)
 		}
 
 		flush_dcache_page(sg_page(sg));
+
+		data->bytes_xfered += sg->length;
 	}
 
 	/* Is there another transfer to trigger? */
@@ -334,10 +403,32 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
 	} else
 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+}
+
+/*
+ * Update bytes tranfered count during a write operation
+ */
+static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
+{
+	struct mmc_data *data;
+
+	/* always deal with the effective request (and not the current cmd) */
+
+	if (host->request->cmd && host->request->cmd->error != 0)
+		return;
 
-	data->bytes_xfered = host->total_length;
+	if (host->request->data) {
+		data = host->request->data;
+		if (data->flags & MMC_DATA_WRITE) {
+			/* card is in IDLE mode now */
+			pr_debug("-> bytes_xfered %d, total_length = %d\n",
+				data->bytes_xfered, host->total_length);
+			data->bytes_xfered = data->blksz * data->blocks;
+		}
+	}
 }
 
+
 /*Handle after command sent ready*/
 static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
 {
@@ -350,8 +441,7 @@ static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
 		} else return 1;
 	} else if (host->cmd->data->flags & MMC_DATA_WRITE) {
 		/*After sendding multi-block-write command, start DMA transfer*/
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE);
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE);
 		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
 	}
 
@@ -430,11 +520,19 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 
 	if (data) {
 
-		if ( data->blksz & 0x3 ) {
-			pr_debug("Unsupported block size\n");
-			cmd->error = -EINVAL;
-			mmc_request_done(host->mmc, host->request);
-			return;
+		if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) {
+			if (data->blksz & 0x3) {
+				pr_debug("Unsupported block size\n");
+				cmd->error = -EINVAL;
+				mmc_request_done(host->mmc, host->request);
+				return;
+			}
+			if (data->flags & MMC_DATA_STREAM) {
+				pr_debug("Stream commands not supported\n");
+				cmd->error = -EINVAL;
+				mmc_request_done(host->mmc, host->request);
+				return;
+			}
 		}
 
 		block_length = data->blksz;
@@ -481,8 +579,16 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 		ier = AT91_MCI_CMDRDY;
 	} else {
 		/* zero block length and PDC mode */
-		mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
-		at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
+		mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff;
+		mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
+		mr |= (block_length << 16);
+		mr |= AT91_MCI_PDCMODE;
+		at91_mci_write(host, AT91_MCI_MR, mr);
+
+		if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261()))
+			at91_mci_write(host, AT91_MCI_BLKR,
+				AT91_MCI_BLKR_BCNT(blocks) |
+				AT91_MCI_BLKR_BLKLEN(block_length));
 
 		/*
 		 * Disable the PDC controller
@@ -508,6 +614,13 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 				 * Handle a write
 				 */
 				host->total_length = block_length * blocks;
+				/*
+				 * AT91SAM926[0/3] Data Write Operation and
+				 * number of bytes erratum
+				 */
+				if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
+					if (host->total_length < 12)
+						host->total_length = 12;
 				host->buffer = dma_alloc_coherent(NULL,
 						host->total_length,
 						&host->physical_address, GFP_KERNEL);
@@ -517,7 +630,9 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 				pr_debug("Transmitting %d bytes\n", host->total_length);
 
 				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-				at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
+				at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
+						host->total_length : host->total_length / 4);
+
 				ier = AT91_MCI_CMDRDY;
 			}
 		}
@@ -552,20 +667,26 @@ static void at91_mci_process_next(struct at91mci_host *host)
 	else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
 		host->flags |= FL_SENT_STOP;
 		at91_mci_send_command(host, host->request->stop);
-	}
-	else
+	} else {
+		del_timer(&host->timer);
+		/* the at91rm9200 mci controller hangs after some transfers,
+		 * and the workaround is to reset it after each transfer.
+		 */
+		if (cpu_is_at91rm9200())
+			at91_reset_host(host);
 		mmc_request_done(host->mmc, host->request);
+	}
 }
 
 /*
  * Handle a command that has been completed
  */
-static void at91_mci_completed_command(struct at91mci_host *host)
+static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status)
 {
 	struct mmc_command *cmd = host->cmd;
-	unsigned int status;
+	struct mmc_data *data = cmd->data;
 
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
 
 	cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
 	cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
@@ -577,25 +698,34 @@ static void at91_mci_completed_command(struct at91mci_host *host)
 		host->buffer = NULL;
 	}
 
-	status = at91_mci_read(host, AT91_MCI_SR);
-
-	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
-		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+	pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
+		 status, at91_mci_read(host, AT91_MCI_SR),
+		 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
 
 	if (status & AT91_MCI_ERRORS) {
 		if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
 			cmd->error = 0;
 		}
 		else {
-			if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
-				cmd->error = -ETIMEDOUT;
-			else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
-				cmd->error = -EILSEQ;
-			else
-				cmd->error = -EIO;
+			if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) {
+				if (data) {
+					if (status & AT91_MCI_DTOE)
+						data->error = -ETIMEDOUT;
+					else if (status & AT91_MCI_DCRCE)
+						data->error = -EILSEQ;
+				}
+			} else {
+				if (status & AT91_MCI_RTOE)
+					cmd->error = -ETIMEDOUT;
+				else if (status & AT91_MCI_RCRCE)
+					cmd->error = -EILSEQ;
+				else
+					cmd->error = -EIO;
+			}
 
-			pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n",
-				 cmd->error, cmd->opcode, cmd->retries);
+			pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n",
+				cmd->error, data ? data->error : 0,
+				 cmd->opcode, cmd->retries);
 		}
 	}
 	else
@@ -613,6 +743,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->request = mrq;
 	host->flags = 0;
 
+	mod_timer(&host->timer, jiffies +  HZ);
+
 	at91_mci_process_next(host);
 }
 
@@ -736,6 +868,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 
 		if (int_status & AT91_MCI_NOTBUSY) {
 			pr_debug("Card is ready\n");
+			at91_mci_update_bytes_xfered(host);
 			completed = 1;
 		}
 
@@ -744,9 +877,21 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 
 		if (int_status & AT91_MCI_BLKE) {
 			pr_debug("Block transfer has ended\n");
-			completed = 1;
+			if (host->request->data && host->request->data->blocks > 1) {
+				/* multi block write : complete multi write
+				 * command and send stop */
+				completed = 1;
+			} else {
+				at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+			}
 		}
 
+		if (int_status & AT91_MCI_SDIOIRQA)
+			mmc_signal_sdio_irq(host->mmc);
+
+		if (int_status & AT91_MCI_SDIOIRQB)
+			mmc_signal_sdio_irq(host->mmc);
+
 		if (int_status & AT91_MCI_TXRDY)
 			pr_debug("Ready to transmit\n");
 
@@ -761,10 +906,10 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 
 	if (completed) {
 		pr_debug("Completed command\n");
-		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-		at91_mci_completed_command(host);
+		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
+		at91_mci_completed_command(host, int_status);
 	} else
-		at91_mci_write(host, AT91_MCI_IDR, int_status);
+		at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
 
 	return IRQ_HANDLED;
 }
@@ -793,25 +938,33 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
 
 static int at91_mci_get_ro(struct mmc_host *mmc)
 {
-	int read_only = 0;
 	struct at91mci_host *host = mmc_priv(mmc);
 
-	if (host->board->wp_pin) {
-		read_only = gpio_get_value(host->board->wp_pin);
-		printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
-				(read_only ? "read-only" : "read-write") );
-	}
-	else {
-		printk(KERN_WARNING "%s: host does not support reading read-only "
-				"switch.  Assuming write-enable.\n", mmc_hostname(mmc));
-	}
-	return read_only;
+	if (host->board->wp_pin)
+		return !!gpio_get_value(host->board->wp_pin);
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
+}
+
+static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct at91mci_host *host = mmc_priv(mmc);
+
+	pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
+		host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
+	at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
+		host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
+
 }
 
 static const struct mmc_host_ops at91_mci_ops = {
 	.request	= at91_mci_request,
 	.set_ios	= at91_mci_set_ios,
 	.get_ro		= at91_mci_get_ro,
+	.enable_sdio_irq = at91_mci_enable_sdio_irq,
 };
 
 /*
@@ -842,6 +995,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	mmc->f_min = 375000;
 	mmc->f_max = 25000000;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_SDIO_IRQ;
 
 	mmc->max_blk_size = 4095;
 	mmc->max_blk_count = mmc->max_req_size;
@@ -935,6 +1089,8 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 
 	mmc_add_host(mmc);
 
+	setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
+
 	/*
 	 * monitor card insertion/removal if we can
 	 */
@@ -995,6 +1151,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
 	}
 
 	at91_mci_disable(host);
+	del_timer_sync(&host->timer);
 	mmc_remove_host(mmc);
 	free_irq(host->irq, host);
 
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
new file mode 100644
index 00000000000..a9a5657706c
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+#define __DRIVERS_MMC_ATMEL_MCI_H__
+
+/* MCI Register Definitions */
+#define MCI_CR			0x0000	/* Control */
+# define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
+# define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
+#define MCI_MR			0x0004	/* Mode */
+# define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
+# define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
+# define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+#define MCI_DTOR		0x0008	/* Data Timeout */
+# define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
+# define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
+#define MCI_SDCR		0x000c	/* SD Card / SDIO */
+# define MCI_SDCSEL_SLOT_A	(  0 <<  0)	/* Select SD slot A */
+# define MCI_SDCSEL_SLOT_B	(  1 <<  0)	/* Select SD slot A */
+# define MCI_SDCBUS_1BIT	(  0 <<  7)	/* 1-bit data bus */
+# define MCI_SDCBUS_4BIT	(  1 <<  7)	/* 4-bit data bus */
+#define MCI_ARGR		0x0010	/* Command Argument */
+#define MCI_CMDR		0x0014	/* Command */
+# define MCI_CMDR_CMDNB(x)	((x) <<  0)	/* Command Opcode */
+# define MCI_CMDR_RSPTYP_NONE	(  0 <<  6)	/* No response */
+# define MCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
+# define MCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
+# define MCI_CMDR_SPCMD_INIT	(  1 <<  8)	/* Initialization command */
+# define MCI_CMDR_SPCMD_SYNC	(  2 <<  8)	/* Synchronized command */
+# define MCI_CMDR_SPCMD_INT	(  4 <<  8)	/* Interrupt command */
+# define MCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
+# define MCI_CMDR_OPDCMD	(  1 << 11)	/* Open Drain */
+# define MCI_CMDR_MAXLAT_5CYC	(  0 << 12)	/* Max latency 5 cycles */
+# define MCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
+# define MCI_CMDR_START_XFER	(  1 << 16)	/* Start data transfer */
+# define MCI_CMDR_STOP_XFER	(  2 << 16)	/* Stop data transfer */
+# define MCI_CMDR_TRDIR_WRITE	(  0 << 18)	/* Write data */
+# define MCI_CMDR_TRDIR_READ	(  1 << 18)	/* Read data */
+# define MCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
+# define MCI_CMDR_MULTI_BLOCK	(  1 << 19)	/* Multi-block transfer */
+# define MCI_CMDR_STREAM	(  2 << 19)	/* MMC Stream transfer */
+# define MCI_CMDR_SDIO_BYTE	(  4 << 19)	/* SDIO Byte transfer */
+# define MCI_CMDR_SDIO_BLOCK	(  5 << 19)	/* SDIO Block transfer */
+# define MCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
+# define MCI_CMDR_SDIO_RESUME	(  2 << 24)	/* SDIO Resume Command */
+#define MCI_BLKR		0x0018	/* Block */
+# define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
+# define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define MCI_RSPR		0x0020	/* Response 0 */
+#define MCI_RSPR1		0x0024	/* Response 1 */
+#define MCI_RSPR2		0x0028	/* Response 2 */
+#define MCI_RSPR3		0x002c	/* Response 3 */
+#define MCI_RDR			0x0030	/* Receive Data */
+#define MCI_TDR			0x0034	/* Transmit Data */
+#define MCI_SR			0x0040	/* Status */
+#define MCI_IER			0x0044	/* Interrupt Enable */
+#define MCI_IDR			0x0048	/* Interrupt Disable */
+#define MCI_IMR			0x004c	/* Interrupt Mask */
+# define MCI_CMDRDY		(  1 <<   0)	/* Command Ready */
+# define MCI_RXRDY		(  1 <<   1)	/* Receiver Ready */
+# define MCI_TXRDY		(  1 <<   2)	/* Transmitter Ready */
+# define MCI_BLKE		(  1 <<   3)	/* Data Block Ended */
+# define MCI_DTIP		(  1 <<   4)	/* Data Transfer In Progress */
+# define MCI_NOTBUSY		(  1 <<   5)	/* Data Not Busy */
+# define MCI_SDIOIRQA		(  1 <<   8)	/* SDIO IRQ in slot A */
+# define MCI_SDIOIRQB		(  1 <<   9)	/* SDIO IRQ in slot B */
+# define MCI_RINDE		(  1 <<  16)	/* Response Index Error */
+# define MCI_RDIRE		(  1 <<  17)	/* Response Direction Error */
+# define MCI_RCRCE		(  1 <<  18)	/* Response CRC Error */
+# define MCI_RENDE		(  1 <<  19)	/* Response End Bit Error */
+# define MCI_RTOE		(  1 <<  20)	/* Response Time-Out Error */
+# define MCI_DCRCE		(  1 <<  21)	/* Data CRC Error */
+# define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
+# define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
+# define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+
+/* Register access macros */
+#define mci_readl(port,reg)				\
+	__raw_readl((port)->regs + MCI_##reg)
+#define mci_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
new file mode 100644
index 00000000000..cce873c5a14
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci.c
@@ -0,0 +1,981 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/atmel-mci.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "atmel-mci-regs.h"
+
+#define ATMCI_DATA_ERROR_FLAGS	(MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_DATA_ERROR,
+	EVENT_DATA_COMPLETE,
+	EVENT_STOP_SENT,
+	EVENT_STOP_COMPLETE,
+	EVENT_XFER_COMPLETE,
+};
+
+struct atmel_mci {
+	struct mmc_host		*mmc;
+	void __iomem		*regs;
+
+	struct scatterlist	*sg;
+	unsigned int		pio_offset;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_status;
+	u32			stop_cmdr;
+
+	u32			mode_reg;
+	u32			sdc_reg;
+
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+
+	int			present;
+	int			detect_pin;
+	int			wp_pin;
+
+	/* For detect pin debouncing */
+	struct timer_list	detect_timer;
+
+	unsigned long		bus_hz;
+	unsigned long		mapbase;
+	struct clk		*mck;
+	struct platform_device	*pdev;
+};
+
+#define atmci_is_completed(host, event)				\
+	test_bit(event, &host->completed_events)
+#define atmci_test_and_clear_pending(host, event)		\
+	test_and_clear_bit(event, &host->pending_events)
+#define atmci_test_and_set_completed(host, event)		\
+	test_and_set_bit(event, &host->completed_events)
+#define atmci_set_completed(host, event)			\
+	set_bit(event, &host->completed_events)
+#define atmci_set_pending(host, event)				\
+	set_bit(event, &host->pending_events)
+#define atmci_clear_pending(host, event)			\
+	clear_bit(event, &host->pending_events)
+
+
+static void atmci_enable(struct atmel_mci *host)
+{
+	clk_enable(host->mck);
+	mci_writel(host, CR, MCI_CR_MCIEN);
+	mci_writel(host, MR, host->mode_reg);
+	mci_writel(host, SDCR, host->sdc_reg);
+}
+
+static void atmci_disable(struct atmel_mci *host)
+{
+	mci_writel(host, CR, MCI_CR_SWRST);
+
+	/* Stall until write is complete, then disable the bus clock */
+	mci_readl(host, SR);
+	clk_disable(host->mck);
+}
+
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+					unsigned int ns)
+{
+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+			      struct mmc_data *data)
+{
+	static unsigned	dtomul_to_shift[] = {
+		0, 4, 7, 8, 10, 12, 16, 20
+	};
+	unsigned	timeout;
+	unsigned	dtocyc;
+	unsigned	dtomul;
+
+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
+	for (dtomul = 0; dtomul < 8; dtomul++) {
+		unsigned shift = dtomul_to_shift[dtomul];
+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
+		if (dtocyc < 15)
+			break;
+	}
+
+	if (dtomul >= 8) {
+		dtomul = 7;
+		dtocyc = 15;
+	}
+
+	dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
+			dtocyc << dtomul_to_shift[dtomul]);
+	mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
+}
+
+/*
+ * Return mask with command flags to be enabled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+				 struct mmc_command *cmd)
+{
+	struct mmc_data	*data;
+	u32		cmdr;
+
+	cmd->error = -EINPROGRESS;
+
+	cmdr = MCI_CMDR_CMDNB(cmd->opcode);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			cmdr |= MCI_CMDR_RSPTYP_136BIT;
+		else
+			cmdr |= MCI_CMDR_RSPTYP_48BIT;
+	}
+
+	/*
+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+	 * it's too difficult to determine whether this is an ACMD or
+	 * not. Better make it 64.
+	 */
+	cmdr |= MCI_CMDR_MAXLAT_64CYC;
+
+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdr |= MCI_CMDR_OPDCMD;
+
+	data = cmd->data;
+	if (data) {
+		cmdr |= MCI_CMDR_START_XFER;
+		if (data->flags & MMC_DATA_STREAM)
+			cmdr |= MCI_CMDR_STREAM;
+		else if (data->blocks > 1)
+			cmdr |= MCI_CMDR_MULTI_BLOCK;
+		else
+			cmdr |= MCI_CMDR_BLOCK;
+
+		if (data->flags & MMC_DATA_READ)
+			cmdr |= MCI_CMDR_TRDIR_READ;
+	}
+
+	return cmdr;
+}
+
+static void atmci_start_command(struct atmel_mci *host,
+				struct mmc_command *cmd,
+				u32 cmd_flags)
+{
+	/* Must read host->cmd after testing event flags */
+	smp_rmb();
+	WARN_ON(host->cmd);
+	host->cmd = cmd;
+
+	dev_vdbg(&host->mmc->class_dev,
+			"start command: ARGR=0x%08x CMDR=0x%08x\n",
+			cmd->arg, cmd_flags);
+
+	mci_writel(host, ARGR, cmd->arg);
+	mci_writel(host, CMDR, cmd_flags);
+}
+
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	atmci_start_command(host, data->stop, host->stop_cmdr);
+	mci_writel(host, IER, MCI_CMDRDY);
+}
+
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	WARN_ON(host->cmd || host->data);
+	host->mrq = NULL;
+
+	atmci_disable(host);
+
+	mmc_request_done(mmc, mrq);
+}
+
+/*
+ * Returns a mask of interrupt flags to be enabled after the whole
+ * request has been prepared.
+ */
+static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
+{
+	struct atmel_mci	*host = mmc_priv(mmc);
+	u32			iflags;
+
+	data->error = -EINPROGRESS;
+
+	WARN_ON(host->data);
+	host->sg = NULL;
+	host->data = data;
+
+	mci_writel(host, BLKR, MCI_BCNT(data->blocks)
+			| MCI_BLKLEN(data->blksz));
+	dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
+			MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
+
+	iflags = ATMCI_DATA_ERROR_FLAGS;
+	host->sg = data->sg;
+	host->pio_offset = 0;
+	if (data->flags & MMC_DATA_READ)
+		iflags |= MCI_RXRDY;
+	else
+		iflags |= MCI_TXRDY;
+
+	return iflags;
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci	*host = mmc_priv(mmc);
+	struct mmc_data		*data;
+	struct mmc_command	*cmd;
+	u32			iflags;
+	u32			cmdflags = 0;
+
+	iflags = mci_readl(host, IMR);
+	if (iflags)
+		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
+				mci_readl(host, IMR));
+
+	WARN_ON(host->mrq != NULL);
+
+	/*
+	 * We may "know" the card is gone even though there's still an
+	 * electrical connection. If so, we really need to communicate
+	 * this to the MMC core since there won't be any more
+	 * interrupts as the card is completely removed. Otherwise,
+	 * the MMC core might believe the card is still there even
+	 * though the card was just removed very slowly.
+	 */
+	if (!host->present) {
+		mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	host->mrq = mrq;
+	host->pending_events = 0;
+	host->completed_events = 0;
+
+	atmci_enable(host);
+
+	/* We don't support multiple blocks of weird lengths. */
+	data = mrq->data;
+	if (data) {
+		if (data->blocks > 1 && data->blksz & 3)
+			goto fail;
+		atmci_set_timeout(host, data);
+	}
+
+	iflags = MCI_CMDRDY;
+	cmd = mrq->cmd;
+	cmdflags = atmci_prepare_command(mmc, cmd);
+	atmci_start_command(host, cmd, cmdflags);
+
+	if (data)
+		iflags |= atmci_submit_data(mmc, data);
+
+	if (mrq->stop) {
+		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
+		host->stop_cmdr |= MCI_CMDR_STOP_XFER;
+		if (!(data->flags & MMC_DATA_WRITE))
+			host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
+		if (data->flags & MMC_DATA_STREAM)
+			host->stop_cmdr |= MCI_CMDR_STREAM;
+		else
+			host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
+	}
+
+	/*
+	 * We could have enabled interrupts earlier, but I suspect
+	 * that would open up a nice can of interesting race
+	 * conditions (e.g. command and data complete, but stop not
+	 * prepared yet.)
+	 */
+	mci_writel(host, IER, iflags);
+
+	return;
+
+fail:
+	atmci_disable(host);
+	host->mrq = NULL;
+	mrq->cmd->error = -EINVAL;
+	mmc_request_done(mmc, mrq);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct atmel_mci	*host = mmc_priv(mmc);
+
+	if (ios->clock) {
+		u32 clkdiv;
+
+		/* Set clock rate */
+		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
+		if (clkdiv > 255) {
+			dev_warn(&mmc->class_dev,
+				"clock %u too slow; using %lu\n",
+				ios->clock, host->bus_hz / (2 * 256));
+			clkdiv = 255;
+		}
+
+		host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
+					| MCI_MR_RDPROOF;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		host->sdc_reg = 0;
+		break;
+	case MMC_BUS_WIDTH_4:
+		host->sdc_reg = MCI_SDCBUS_4BIT;
+		break;
+	}
+
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		/* Send init sequence (74 clock cycles) */
+		atmci_enable(host);
+		mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
+		while (!(mci_readl(host, SR) & MCI_CMDRDY))
+			cpu_relax();
+		atmci_disable(host);
+		break;
+	default:
+		/*
+		 * TODO: None of the currently available AVR32-based
+		 * boards allow MMC power to be turned off. Implement
+		 * power control when this can be tested properly.
+		 */
+		break;
+	}
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+	int			read_only = 0;
+	struct atmel_mci	*host = mmc_priv(mmc);
+
+	if (host->wp_pin >= 0) {
+		read_only = gpio_get_value(host->wp_pin);
+		dev_dbg(&mmc->class_dev, "card is %s\n",
+				read_only ? "read-only" : "read-write");
+	} else {
+		dev_dbg(&mmc->class_dev,
+			"no pin for checking read-only switch."
+			" Assuming write-enable.\n");
+	}
+
+	return read_only;
+}
+
+static struct mmc_host_ops atmci_ops = {
+	.request	= atmci_request,
+	.set_ios	= atmci_set_ios,
+	.get_ro		= atmci_get_ro,
+};
+
+static void atmci_command_complete(struct atmel_mci *host,
+			struct mmc_command *cmd, u32 status)
+{
+	/* Read the response from the card (up to 16 bytes) */
+	cmd->resp[0] = mci_readl(host, RSPR);
+	cmd->resp[1] = mci_readl(host, RSPR);
+	cmd->resp[2] = mci_readl(host, RSPR);
+	cmd->resp[3] = mci_readl(host, RSPR);
+
+	if (status & MCI_RTOE)
+		cmd->error = -ETIMEDOUT;
+	else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
+		cmd->error = -EILSEQ;
+	else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
+		cmd->error = -EIO;
+	else
+		cmd->error = 0;
+
+	if (cmd->error) {
+		dev_dbg(&host->mmc->class_dev,
+			"command error: status=0x%08x\n", status);
+
+		if (cmd->data) {
+			host->data = NULL;
+			mci_writel(host, IDR, MCI_NOTBUSY
+					| MCI_TXRDY | MCI_RXRDY
+					| ATMCI_DATA_ERROR_FLAGS);
+		}
+	}
+}
+
+static void atmci_detect_change(unsigned long data)
+{
+	struct atmel_mci *host = (struct atmel_mci *)data;
+	struct mmc_request *mrq = host->mrq;
+	int present;
+
+	/*
+	 * atmci_remove() sets detect_pin to -1 before freeing the
+	 * interrupt. We must not re-enable the interrupt if it has
+	 * been freed.
+	 */
+	smp_rmb();
+	if (host->detect_pin < 0)
+		return;
+
+	enable_irq(gpio_to_irq(host->detect_pin));
+	present = !gpio_get_value(host->detect_pin);
+
+	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
+			present, host->present);
+
+	if (present != host->present) {
+		dev_dbg(&host->mmc->class_dev, "card %s\n",
+			present ? "inserted" : "removed");
+		host->present = present;
+
+		/* Reset controller if card is gone */
+		if (!present) {
+			mci_writel(host, CR, MCI_CR_SWRST);
+			mci_writel(host, IDR, ~0UL);
+			mci_writel(host, CR, MCI_CR_MCIEN);
+		}
+
+		/* Clean up queue if present */
+		if (mrq) {
+			/*
+			 * Reset controller to terminate any ongoing
+			 * commands or data transfers.
+			 */
+			mci_writel(host, CR, MCI_CR_SWRST);
+
+			if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
+				mrq->cmd->error = -ENOMEDIUM;
+
+			if (mrq->data && !atmci_is_completed(host,
+						EVENT_DATA_COMPLETE)) {
+				host->data = NULL;
+				mrq->data->error = -ENOMEDIUM;
+			}
+			if (mrq->stop && !atmci_is_completed(host,
+						EVENT_STOP_COMPLETE))
+				mrq->stop->error = -ENOMEDIUM;
+
+			host->cmd = NULL;
+			atmci_request_end(host->mmc, mrq);
+		}
+
+		mmc_detect_change(host->mmc, 0);
+	}
+}
+
+static void atmci_tasklet_func(unsigned long priv)
+{
+	struct mmc_host		*mmc = (struct mmc_host *)priv;
+	struct atmel_mci	*host = mmc_priv(mmc);
+	struct mmc_request	*mrq = host->mrq;
+	struct mmc_data		*data = host->data;
+
+	dev_vdbg(&mmc->class_dev,
+		"tasklet: pending/completed/mask %lx/%lx/%x\n",
+		host->pending_events, host->completed_events,
+		mci_readl(host, IMR));
+
+	if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
+		/*
+		 * host->cmd must be set to NULL before the interrupt
+		 * handler sees EVENT_CMD_COMPLETE
+		 */
+		host->cmd = NULL;
+		smp_wmb();
+		atmci_set_completed(host, EVENT_CMD_COMPLETE);
+		atmci_command_complete(host, mrq->cmd, host->cmd_status);
+
+		if (!mrq->cmd->error && mrq->stop
+				&& atmci_is_completed(host, EVENT_XFER_COMPLETE)
+				&& !atmci_test_and_set_completed(host,
+					EVENT_STOP_SENT))
+			send_stop_cmd(host->mmc, mrq->data);
+	}
+	if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
+		/*
+		 * host->cmd must be set to NULL before the interrupt
+		 * handler sees EVENT_STOP_COMPLETE
+		 */
+		host->cmd = NULL;
+		smp_wmb();
+		atmci_set_completed(host, EVENT_STOP_COMPLETE);
+		atmci_command_complete(host, mrq->stop, host->stop_status);
+	}
+	if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
+		u32 status = host->data_status;
+
+		dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
+
+		atmci_set_completed(host, EVENT_DATA_ERROR);
+		atmci_set_completed(host, EVENT_DATA_COMPLETE);
+
+		if (status & MCI_DTOE) {
+			dev_dbg(&mmc->class_dev,
+					"data timeout error\n");
+			data->error = -ETIMEDOUT;
+		} else if (status & MCI_DCRCE) {
+			dev_dbg(&mmc->class_dev, "data CRC error\n");
+			data->error = -EILSEQ;
+		} else {
+			dev_dbg(&mmc->class_dev,
+					"data FIFO error (status=%08x)\n",
+					status);
+			data->error = -EIO;
+		}
+
+		if (host->present && data->stop
+				&& atmci_is_completed(host, EVENT_CMD_COMPLETE)
+				&& !atmci_test_and_set_completed(
+					host, EVENT_STOP_SENT))
+			send_stop_cmd(host->mmc, data);
+
+		host->data = NULL;
+	}
+	if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
+		atmci_set_completed(host, EVENT_DATA_COMPLETE);
+
+		if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
+			data->bytes_xfered = data->blocks * data->blksz;
+			data->error = 0;
+		}
+
+		host->data = NULL;
+	}
+
+	if (host->mrq && !host->cmd && !host->data)
+		atmci_request_end(mmc, host->mrq);
+}
+
+static void atmci_read_data_pio(struct atmel_mci *host)
+{
+	struct scatterlist	*sg = host->sg;
+	void			*buf = sg_virt(sg);
+	unsigned int		offset = host->pio_offset;
+	struct mmc_data		*data = host->data;
+	u32			value;
+	u32			status;
+	unsigned int		nbytes = 0;
+
+	do {
+		value = mci_readl(host, RDR);
+		if (likely(offset + 4 <= sg->length)) {
+			put_unaligned(value, (u32 *)(buf + offset));
+
+			offset += 4;
+			nbytes += 4;
+
+			if (offset == sg->length) {
+				host->sg = sg = sg_next(sg);
+				if (!sg)
+					goto done;
+
+				offset = 0;
+				buf = sg_virt(sg);
+			}
+		} else {
+			unsigned int remaining = sg->length - offset;
+			memcpy(buf + offset, &value, remaining);
+			nbytes += remaining;
+
+			flush_dcache_page(sg_page(sg));
+			host->sg = sg = sg_next(sg);
+			if (!sg)
+				goto done;
+
+			offset = 4 - remaining;
+			buf = sg_virt(sg);
+			memcpy(buf, (u8 *)&value + remaining, offset);
+			nbytes += offset;
+		}
+
+		status = mci_readl(host, SR);
+		if (status & ATMCI_DATA_ERROR_FLAGS) {
+			mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
+						| ATMCI_DATA_ERROR_FLAGS));
+			host->data_status = status;
+			atmci_set_pending(host, EVENT_DATA_ERROR);
+			tasklet_schedule(&host->tasklet);
+			break;
+		}
+	} while (status & MCI_RXRDY);
+
+	host->pio_offset = offset;
+	data->bytes_xfered += nbytes;
+
+	return;
+
+done:
+	mci_writel(host, IDR, MCI_RXRDY);
+	mci_writel(host, IER, MCI_NOTBUSY);
+	data->bytes_xfered += nbytes;
+	atmci_set_completed(host, EVENT_XFER_COMPLETE);
+	if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+			&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+		send_stop_cmd(host->mmc, data);
+}
+
+static void atmci_write_data_pio(struct atmel_mci *host)
+{
+	struct scatterlist	*sg = host->sg;
+	void			*buf = sg_virt(sg);
+	unsigned int		offset = host->pio_offset;
+	struct mmc_data		*data = host->data;
+	u32			value;
+	u32			status;
+	unsigned int		nbytes = 0;
+
+	do {
+		if (likely(offset + 4 <= sg->length)) {
+			value = get_unaligned((u32 *)(buf + offset));
+			mci_writel(host, TDR, value);
+
+			offset += 4;
+			nbytes += 4;
+			if (offset == sg->length) {
+				host->sg = sg = sg_next(sg);
+				if (!sg)
+					goto done;
+
+				offset = 0;
+				buf = sg_virt(sg);
+			}
+		} else {
+			unsigned int remaining = sg->length - offset;
+
+			value = 0;
+			memcpy(&value, buf + offset, remaining);
+			nbytes += remaining;
+
+			host->sg = sg = sg_next(sg);
+			if (!sg) {
+				mci_writel(host, TDR, value);
+				goto done;
+			}
+
+			offset = 4 - remaining;
+			buf = sg_virt(sg);
+			memcpy((u8 *)&value + remaining, buf, offset);
+			mci_writel(host, TDR, value);
+			nbytes += offset;
+		}
+
+		status = mci_readl(host, SR);
+		if (status & ATMCI_DATA_ERROR_FLAGS) {
+			mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
+						| ATMCI_DATA_ERROR_FLAGS));
+			host->data_status = status;
+			atmci_set_pending(host, EVENT_DATA_ERROR);
+			tasklet_schedule(&host->tasklet);
+			break;
+		}
+	} while (status & MCI_TXRDY);
+
+	host->pio_offset = offset;
+	data->bytes_xfered += nbytes;
+
+	return;
+
+done:
+	mci_writel(host, IDR, MCI_TXRDY);
+	mci_writel(host, IER, MCI_NOTBUSY);
+	data->bytes_xfered += nbytes;
+	atmci_set_completed(host, EVENT_XFER_COMPLETE);
+	if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+			&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+		send_stop_cmd(host->mmc, data);
+}
+
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+{
+	struct atmel_mci	*host = mmc_priv(mmc);
+
+	mci_writel(host, IDR, MCI_CMDRDY);
+
+	if (atmci_is_completed(host, EVENT_STOP_SENT)) {
+		host->stop_status = status;
+		atmci_set_pending(host, EVENT_STOP_COMPLETE);
+	} else {
+		host->cmd_status = status;
+		atmci_set_pending(host, EVENT_CMD_COMPLETE);
+	}
+
+	tasklet_schedule(&host->tasklet);
+}
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+	struct mmc_host		*mmc = dev_id;
+	struct atmel_mci	*host = mmc_priv(mmc);
+	u32			status, mask, pending;
+	unsigned int		pass_count = 0;
+
+	spin_lock(&mmc->lock);
+
+	do {
+		status = mci_readl(host, SR);
+		mask = mci_readl(host, IMR);
+		pending = status & mask;
+		if (!pending)
+			break;
+
+		if (pending & ATMCI_DATA_ERROR_FLAGS) {
+			mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
+					| MCI_RXRDY | MCI_TXRDY);
+			pending &= mci_readl(host, IMR);
+			host->data_status = status;
+			atmci_set_pending(host, EVENT_DATA_ERROR);
+			tasklet_schedule(&host->tasklet);
+		}
+		if (pending & MCI_NOTBUSY) {
+			mci_writel(host, IDR, (MCI_NOTBUSY
+					       | ATMCI_DATA_ERROR_FLAGS));
+			atmci_set_pending(host, EVENT_DATA_COMPLETE);
+			tasklet_schedule(&host->tasklet);
+		}
+		if (pending & MCI_RXRDY)
+			atmci_read_data_pio(host);
+		if (pending & MCI_TXRDY)
+			atmci_write_data_pio(host);
+
+		if (pending & MCI_CMDRDY)
+			atmci_cmd_interrupt(mmc, status);
+	} while (pass_count++ < 5);
+
+	spin_unlock(&mmc->lock);
+
+	return pass_count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
+	struct mmc_host		*mmc = dev_id;
+	struct atmel_mci	*host = mmc_priv(mmc);
+
+	/*
+	 * Disable interrupts until the pin has stabilized and check
+	 * the state then. Use mod_timer() since we may be in the
+	 * middle of the timer routine when this interrupt triggers.
+	 */
+	disable_irq_nosync(irq);
+	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+
+	return IRQ_HANDLED;
+}
+
+static int __init atmci_probe(struct platform_device *pdev)
+{
+	struct mci_platform_data	*pdata;
+	struct atmel_mci *host;
+	struct mmc_host *mmc;
+	struct resource *regs;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
+	host->pdev = pdev;
+	host->mmc = mmc;
+	host->detect_pin = pdata->detect_pin;
+	host->wp_pin = pdata->wp_pin;
+
+	host->mck = clk_get(&pdev->dev, "mci_clk");
+	if (IS_ERR(host->mck)) {
+		ret = PTR_ERR(host->mck);
+		goto err_clk_get;
+	}
+
+	ret = -ENOMEM;
+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!host->regs)
+		goto err_ioremap;
+
+	clk_enable(host->mck);
+	mci_writel(host, CR, MCI_CR_SWRST);
+	host->bus_hz = clk_get_rate(host->mck);
+	clk_disable(host->mck);
+
+	host->mapbase = regs->start;
+
+	mmc->ops = &atmci_ops;
+	mmc->f_min = (host->bus_hz + 511) / 512;
+	mmc->f_max = host->bus_hz / 2;
+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	mmc->max_hw_segs = 64;
+	mmc->max_phys_segs = 64;
+	mmc->max_req_size = 32768 * 512;
+	mmc->max_blk_size = 32768;
+	mmc->max_blk_count = 512;
+
+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+
+	ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
+	if (ret)
+		goto err_request_irq;
+
+	/* Assume card is present if we don't have a detect pin */
+	host->present = 1;
+	if (host->detect_pin >= 0) {
+		if (gpio_request(host->detect_pin, "mmc_detect")) {
+			dev_dbg(&mmc->class_dev, "no detect pin available\n");
+			host->detect_pin = -1;
+		} else {
+			host->present = !gpio_get_value(host->detect_pin);
+		}
+	}
+	if (host->wp_pin >= 0) {
+		if (gpio_request(host->wp_pin, "mmc_wp")) {
+			dev_dbg(&mmc->class_dev, "no WP pin available\n");
+			host->wp_pin = -1;
+		}
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	mmc_add_host(mmc);
+
+	if (host->detect_pin >= 0) {
+		setup_timer(&host->detect_timer, atmci_detect_change,
+				(unsigned long)host);
+
+		ret = request_irq(gpio_to_irq(host->detect_pin),
+				atmci_detect_interrupt,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				"mmc-detect", mmc);
+		if (ret) {
+			dev_dbg(&mmc->class_dev,
+				"could not request IRQ %d for detect pin\n",
+				gpio_to_irq(host->detect_pin));
+			gpio_free(host->detect_pin);
+			host->detect_pin = -1;
+		}
+	}
+
+	dev_info(&mmc->class_dev,
+			"Atmel MCI controller at 0x%08lx irq %d\n",
+			host->mapbase, irq);
+
+	return 0;
+
+err_request_irq:
+	iounmap(host->regs);
+err_ioremap:
+	clk_put(host->mck);
+err_clk_get:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static int __exit atmci_remove(struct platform_device *pdev)
+{
+	struct atmel_mci *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (host) {
+		if (host->detect_pin >= 0) {
+			int pin = host->detect_pin;
+
+			/* Make sure the timer doesn't enable the interrupt */
+			host->detect_pin = -1;
+			smp_wmb();
+
+			free_irq(gpio_to_irq(pin), host->mmc);
+			del_timer_sync(&host->detect_timer);
+			gpio_free(pin);
+		}
+
+		mmc_remove_host(host->mmc);
+
+		clk_enable(host->mck);
+		mci_writel(host, IDR, ~0UL);
+		mci_writel(host, CR, MCI_CR_MCIDIS);
+		mci_readl(host, SR);
+		clk_disable(host->mck);
+
+		if (host->wp_pin >= 0)
+			gpio_free(host->wp_pin);
+
+		free_irq(platform_get_irq(pdev, 0), host->mmc);
+		iounmap(host->regs);
+
+		clk_put(host->mck);
+
+		mmc_free_host(host->mmc);
+	}
+	return 0;
+}
+
+static struct platform_driver atmci_driver = {
+	.remove		= __exit_p(atmci_remove),
+	.driver		= {
+		.name		= "atmel_mci",
+	},
+};
+
+static int __init atmci_init(void)
+{
+	return platform_driver_probe(&atmci_driver, atmci_probe);
+}
+
+static void __exit atmci_exit(void)
+{
+	platform_driver_unregister(&atmci_driver);
+}
+
+module_init(atmci_init);
+module_exit(atmci_exit);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index cc5f7bc546a..3f15eb20489 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -21,7 +21,7 @@
  * published by the Free Software Foundation.
  */
 
-/* Why is a timer used to detect insert events?
+/* Why don't we use the SD controllers' carddetect feature?
  *
  * From the AU1100 MMC application guide:
  * If the Au1100-based design is intended to support both MultiMediaCards
@@ -30,8 +30,6 @@
  * In doing so, a MMC card never enters SPI-mode communications,
  * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
  * (the low to high transition will not occur).
- *
- * So we use the timer to check the status manually.
  */
 
 #include <linux/module.h>
@@ -41,51 +39,110 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
-
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
+
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 
-#include <au1xxx.h>
-#include "au1xmmc.h"
-
 #define DRIVER_NAME "au1xxx-mmc"
 
 /* Set this to enable special debugging macros */
+/* #define DEBUG */
 
 #ifdef DEBUG
-#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
+#define DBG(fmt, idx, args...)	\
+	printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
 #else
-#define DBG(fmt, idx, args...)
+#define DBG(fmt, idx, args...) do {} while (0)
 #endif
 
-const struct {
+/* Hardware definitions */
+#define AU1XMMC_DESCRIPTOR_COUNT 1
+#define AU1XMMC_DESCRIPTOR_SIZE  2048
+
+#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
+		     MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
+		     MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
+
+/* This gives us a hard value for the stop command that we can write directly
+ * to the command register.
+ */
+#define STOP_CMD	\
+	(SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO)
+
+/* This is the set of interrupts that we configure by default. */
+#define AU1XMMC_INTERRUPTS 				\
+	(SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT |	\
+	 SD_CONFIG_CR | SD_CONFIG_I)
+
+/* The poll event (looking for insert/remove events runs twice a second. */
+#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
+
+struct au1xmmc_host {
+	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+
+	u32 flags;
 	u32 iobase;
-	u32 tx_devid, rx_devid;
-	u16 bcsrpwr;
-	u16 bcsrstatus;
-	u16 wpstatus;
-} au1xmmc_card_table[] = {
-	{ SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
-	  BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP },
-#ifndef CONFIG_MIPS_DB1200
-	{ SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1,
-	  BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP }
-#endif
-};
+	u32 clock;
+	u32 bus_width;
+	u32 power_mode;
 
-#define AU1XMMC_CONTROLLER_COUNT (ARRAY_SIZE(au1xmmc_card_table))
+	int status;
 
-/* This array stores pointers for the hosts (used by the IRQ handler) */
-struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
-static int dma = 1;
+	struct {
+		int len;
+		int dir;
+	} dma;
 
-#ifdef MODULE
-module_param(dma, bool, 0);
-MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
-#endif
+	struct {
+		int index;
+		int offset;
+		int len;
+	} pio;
+
+	u32 tx_chan;
+	u32 rx_chan;
+
+	int irq;
+
+	struct tasklet_struct finish_task;
+	struct tasklet_struct data_task;
+	struct au1xmmc_platform_data *platdata;
+	struct platform_device *pdev;
+	struct resource *ioarea;
+};
+
+/* Status flags used by the host structure */
+#define HOST_F_XMIT	0x0001
+#define HOST_F_RECV	0x0002
+#define HOST_F_DMA	0x0010
+#define HOST_F_ACTIVE	0x0100
+#define HOST_F_STOP	0x1000
+
+#define HOST_S_IDLE	0x0001
+#define HOST_S_CMD	0x0002
+#define HOST_S_DATA	0x0003
+#define HOST_S_STOP	0x0004
+
+/* Easy access macros */
+#define HOST_STATUS(h)	((h)->iobase + SD_STATUS)
+#define HOST_CONFIG(h)	((h)->iobase + SD_CONFIG)
+#define HOST_ENABLE(h)	((h)->iobase + SD_ENABLE)
+#define HOST_TXPORT(h)	((h)->iobase + SD_TXPORT)
+#define HOST_RXPORT(h)	((h)->iobase + SD_RXPORT)
+#define HOST_CMDARG(h)	((h)->iobase + SD_CMDARG)
+#define HOST_BLKSIZE(h)	((h)->iobase + SD_BLKSIZE)
+#define HOST_CMD(h)	((h)->iobase + SD_CMD)
+#define HOST_CONFIG2(h)	((h)->iobase + SD_CONFIG2)
+#define HOST_TIMEOUT(h)	((h)->iobase + SD_TIMEOUT)
+#define HOST_DEBUG(h)	((h)->iobase + SD_DEBUG)
+
+#define DMA_CHANNEL(h)	\
+	(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
 
 static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
 {
@@ -119,14 +176,13 @@ static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
 
 static inline void SEND_STOP(struct au1xmmc_host *host)
 {
-
-	/* We know the value of CONFIG2, so avoid a read we don't need */
-	u32 mask = SD_CONFIG2_EN;
+	u32 config2;
 
 	WARN_ON(host->status != HOST_S_DATA);
 	host->status = HOST_S_STOP;
 
-	au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host));
+	config2 = au_readl(HOST_CONFIG2(host));
+	au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
 	au_sync();
 
 	/* Send the stop commmand */
@@ -135,35 +191,36 @@ static inline void SEND_STOP(struct au1xmmc_host *host)
 
 static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
 {
-
-	u32 val = au1xmmc_card_table[host->id].bcsrpwr;
-
-	bcsr->board &= ~val;
-	if (state) bcsr->board |= val;
-
-	au_sync_delay(1);
+	if (host->platdata && host->platdata->set_power)
+		host->platdata->set_power(host->mmc, state);
 }
 
-static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
+static int au1xmmc_card_inserted(struct mmc_host *mmc)
 {
-	return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
-		? 1 : 0;
+	struct au1xmmc_host *host = mmc_priv(mmc);
+
+	if (host->platdata && host->platdata->card_inserted)
+		return !!host->platdata->card_inserted(host->mmc);
+
+	return -ENOSYS;
 }
 
 static int au1xmmc_card_readonly(struct mmc_host *mmc)
 {
 	struct au1xmmc_host *host = mmc_priv(mmc);
-	return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
-		? 1 : 0;
+
+	if (host->platdata && host->platdata->card_readonly)
+		return !!host->platdata->card_readonly(mmc);
+
+	return -ENOSYS;
 }
 
 static void au1xmmc_finish_request(struct au1xmmc_host *host)
 {
-
 	struct mmc_request *mrq = host->mrq;
 
 	host->mrq = NULL;
-	host->flags &= HOST_F_ACTIVE;
+	host->flags &= HOST_F_ACTIVE | HOST_F_DMA;
 
 	host->dma.len = 0;
 	host->dma.dir = 0;
@@ -174,8 +231,6 @@ static void au1xmmc_finish_request(struct au1xmmc_host *host)
 
 	host->status = HOST_S_IDLE;
 
-	bcsr->disk_leds |= (1 << 8);
-
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -235,18 +290,14 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 	au_sync();
 
 	/* Wait for the command to go on the line */
-
-	while(1) {
-		if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
-			break;
-	}
+	while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
+		/* nop */;
 
 	/* Wait for the command to come back */
-
 	if (wait) {
 		u32 status = au_readl(HOST_STATUS(host));
 
-		while(!(status & SD_STATUS_CR))
+		while (!(status & SD_STATUS_CR))
 			status = au_readl(HOST_STATUS(host));
 
 		/* Clear the CR status */
@@ -260,12 +311,11 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 
 static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 {
-
 	struct mmc_request *mrq = host->mrq;
 	struct mmc_data *data;
 	u32 crc;
 
-	WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
+	WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP));
 
 	if (host->mrq == NULL)
 		return;
@@ -276,15 +326,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 		status = au_readl(HOST_STATUS(host));
 
 	/* The transaction is really over when the SD_STATUS_DB bit is clear */
-
-	while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
+	while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
 		status = au_readl(HOST_STATUS(host));
 
 	data->error = 0;
 	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
 
         /* Process any errors */
-
 	crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
 	if (host->flags & HOST_F_XMIT)
 		crc |= ((status & 0x07) == 0x02) ? 0 : 1;
@@ -299,16 +347,16 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 
 	if (!data->error) {
 		if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200	/* DBDMA */
 			u32 chan = DMA_CHANNEL(host);
 
-			chan_tab_t *c = *((chan_tab_t **) chan);
+			chan_tab_t *c = *((chan_tab_t **)chan);
 			au1x_dma_chan_t *cp = c->chan_ptr;
 			data->bytes_xfered = cp->ddma_bytecnt;
-		}
-		else
+#endif
+		} else
 			data->bytes_xfered =
-				(data->blocks * data->blksz) -
-				host->pio.len;
+				(data->blocks * data->blksz) - host->pio.len;
 	}
 
 	au1xmmc_finish_request(host);
@@ -316,7 +364,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 
 static void au1xmmc_tasklet_data(unsigned long param)
 {
-	struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+	struct au1xmmc_host *host = (struct au1xmmc_host *)param;
 
 	u32 status = au_readl(HOST_STATUS(host));
 	au1xmmc_data_complete(host, status);
@@ -326,11 +374,10 @@ static void au1xmmc_tasklet_data(unsigned long param)
 
 static void au1xmmc_send_pio(struct au1xmmc_host *host)
 {
-
-	struct mmc_data *data = 0;
-	int sg_len, max, count = 0;
-	unsigned char *sg_ptr;
-	u32 status = 0;
+	struct mmc_data *data;
+	int sg_len, max, count;
+	unsigned char *sg_ptr, val;
+	u32 status;
 	struct scatterlist *sg;
 
 	data = host->mrq->data;
@@ -345,14 +392,12 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
 	/* This is the space left inside the buffer */
 	sg_len = data->sg[host->pio.index].length - host->pio.offset;
 
-	/* Check to if we need less then the size of the sg_buffer */
-
+	/* Check if we need less than the size of the sg_buffer */
 	max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
-	if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
-
-	for(count = 0; count < max; count++ ) {
-		unsigned char val;
+	if (max > AU1XMMC_MAX_TRANSFER)
+		max = AU1XMMC_MAX_TRANSFER;
 
+	for (count = 0; count < max; count++) {
 		status = au_readl(HOST_STATUS(host));
 
 		if (!(status & SD_STATUS_TH))
@@ -360,7 +405,7 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
 
 		val = *sg_ptr++;
 
-		au_writel((unsigned long) val, HOST_TXPORT(host));
+		au_writel((unsigned long)val, HOST_TXPORT(host));
 		au_sync();
 	}
 
@@ -384,11 +429,10 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host)
 
 static void au1xmmc_receive_pio(struct au1xmmc_host *host)
 {
-
-	struct mmc_data *data = 0;
-	int sg_len = 0, max = 0, count = 0;
-	unsigned char *sg_ptr = 0;
-	u32 status = 0;
+	struct mmc_data *data;
+	int max, count, sg_len = 0;
+	unsigned char *sg_ptr = NULL;
+	u32 status, val;
 	struct scatterlist *sg;
 
 	data = host->mrq->data;
@@ -405,33 +449,33 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
 		/* This is the space left inside the buffer */
 		sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
 
-		/* Check to if we need less then the size of the sg_buffer */
-		if (sg_len < max) max = sg_len;
+		/* Check if we need less than the size of the sg_buffer */
+		if (sg_len < max)
+			max = sg_len;
 	}
 
 	if (max > AU1XMMC_MAX_TRANSFER)
 		max = AU1XMMC_MAX_TRANSFER;
 
-	for(count = 0; count < max; count++ ) {
-		u32 val;
+	for (count = 0; count < max; count++) {
 		status = au_readl(HOST_STATUS(host));
 
 		if (!(status & SD_STATUS_NE))
 			break;
 
 		if (status & SD_STATUS_RC) {
-			DBG("RX CRC Error [%d + %d].\n", host->id,
+			DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
 					host->pio.len, count);
 			break;
 		}
 
 		if (status & SD_STATUS_RO) {
-			DBG("RX Overrun [%d + %d]\n", host->id,
+			DBG("RX Overrun [%d + %d]\n", host->pdev->id,
 					host->pio.len, count);
 			break;
 		}
 		else if (status & SD_STATUS_RU) {
-			DBG("RX Underrun [%d + %d]\n", host->id,
+			DBG("RX Underrun [%d + %d]\n", host->pdev->id,
 					host->pio.len,	count);
 			break;
 		}
@@ -439,7 +483,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
 		val = au_readl(HOST_RXPORT(host));
 
 		if (sg_ptr)
-			*sg_ptr++ = (unsigned char) (val & 0xFF);
+			*sg_ptr++ = (unsigned char)(val & 0xFF);
 	}
 
 	host->pio.len -= count;
@@ -451,7 +495,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
 	}
 
 	if (host->pio.len == 0) {
-		//IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
+		/* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */
 		IRQ_OFF(host, SD_CONFIG_NE);
 
 		if (host->flags & HOST_F_STOP)
@@ -461,17 +505,15 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
 	}
 }
 
-/* static void au1xmmc_cmd_complete
-   This is called when a command has been completed - grab the response
-   and check for errors.  Then start the data transfer if it is indicated.
-*/
-
+/* This is called when a command has been completed - grab the response
+ * and check for errors.  Then start the data transfer if it is indicated.
+ */
 static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 {
-
 	struct mmc_request *mrq = host->mrq;
 	struct mmc_command *cmd;
-	int trans;
+	u32 r[4];
+	int i, trans;
 
 	if (!host->mrq)
 		return;
@@ -481,9 +523,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		if (cmd->flags & MMC_RSP_136) {
-			u32 r[4];
-			int i;
-
 			r[0] = au_readl(host->iobase + SD_RESP3);
 			r[1] = au_readl(host->iobase + SD_RESP2);
 			r[2] = au_readl(host->iobase + SD_RESP1);
@@ -491,10 +530,9 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 
 			/* The CRC is omitted from the response, so really
 			 * we only got 120 bytes, but the engine expects
-			 * 128 bits, so we have to shift things up
+			 * 128 bits, so we have to shift things up.
 			 */
-
-			for(i = 0; i < 4; i++) {
+			for (i = 0; i < 4; i++) {
 				cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
 				if (i != 3)
 					cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
@@ -505,22 +543,20 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 			 * our response omits the CRC, our data ends up
 			 * being shifted 8 bits to the right.  In this case,
 			 * that means that the OSR data starts at bit 31,
-			 * so we can just read RESP0 and return that
+			 * so we can just read RESP0 and return that.
 			 */
 			cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
 		}
 	}
 
         /* Figure out errors */
-
 	if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
 		cmd->error = -EILSEQ;
 
 	trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
 
 	if (!trans || cmd->error) {
-
-		IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
+		IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF);
 		tasklet_schedule(&host->finish_task);
 		return;
 	}
@@ -528,6 +564,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 	host->status = HOST_S_DATA;
 
 	if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200	/* DBDMA */
 		u32 channel = DMA_CHANNEL(host);
 
 		/* Start the DMA as soon as the buffer gets something in it */
@@ -540,23 +577,21 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 		}
 
 		au1xxx_dbdma_start(channel);
+#endif
 	}
 }
 
 static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
 {
-
 	unsigned int pbus = get_au1x00_speed();
 	unsigned int divisor;
 	u32 config;
 
 	/* From databook:
-	   divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
-	*/
-
+	 * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
+	 */
 	pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
 	pbus /= 2;
-
 	divisor = ((pbus / rate) / 2) - 1;
 
 	config = au_readl(HOST_CONFIG(host));
@@ -568,15 +603,11 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
 	au_sync();
 }
 
-static int
-au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
+static int au1xmmc_prepare_data(struct au1xmmc_host *host,
+				struct mmc_data *data)
 {
-
 	int datalen = data->blocks * data->blksz;
 
-	if (dma != 0)
-		host->flags |= HOST_F_DMA;
-
 	if (data->flags & MMC_DATA_READ)
 		host->flags |= HOST_F_RECV;
 	else
@@ -596,12 +627,13 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
 	if (host->flags & HOST_F_DMA) {
+#ifdef CONFIG_SOC_AU1200	/* DBDMA */
 		int i;
 		u32 channel = DMA_CHANNEL(host);
 
 		au1xxx_dbdma_stop(channel);
 
-		for(i = 0; i < host->dma.len; i++) {
+		for (i = 0; i < host->dma.len; i++) {
 			u32 ret = 0, flags = DDMA_FLAGS_NOIE;
 			struct scatterlist *sg = &data->sg[i];
 			int sg_len = sg->length;
@@ -611,23 +643,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 			if (i == host->dma.len - 1)
 				flags = DDMA_FLAGS_IE;
 
-    			if (host->flags & HOST_F_XMIT){
-      				ret = au1xxx_dbdma_put_source_flags(channel,
-					(void *) sg_virt(sg), len, flags);
-			}
-    			else {
-      				ret = au1xxx_dbdma_put_dest_flags(channel,
-					(void *) sg_virt(sg),
-					len, flags);
+			if (host->flags & HOST_F_XMIT) {
+				ret = au1xxx_dbdma_put_source_flags(channel,
+					(void *)sg_virt(sg), len, flags);
+			} else {
+				ret = au1xxx_dbdma_put_dest_flags(channel,
+					(void *)sg_virt(sg), len, flags);
 			}
 
-    			if (!ret)
+			if (!ret)
 				goto dataerr;
 
 			datalen -= len;
 		}
-	}
-	else {
+#endif
+	} else {
 		host->pio.index = 0;
 		host->pio.offset = 0;
 		host->pio.len = datalen;
@@ -636,25 +666,21 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 			IRQ_ON(host, SD_CONFIG_TH);
 		else
 			IRQ_ON(host, SD_CONFIG_NE);
-			//IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
+			/* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */
 	}
 
 	return 0;
 
- dataerr:
-	dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
+dataerr:
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+			host->dma.dir);
 	return -ETIMEDOUT;
 }
 
-/* static void au1xmmc_request
-   This actually starts a command or data transaction
-*/
-
+/* This actually starts a command or data transaction */
 static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
 {
-
 	struct au1xmmc_host *host = mmc_priv(mmc);
-	unsigned int flags = 0;
 	int ret = 0;
 
 	WARN_ON(irqs_disabled());
@@ -663,11 +689,15 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
 	host->mrq = mrq;
 	host->status = HOST_S_CMD;
 
-	bcsr->disk_leds &= ~(1 << 8);
+	/* fail request immediately if no card is present */
+	if (0 == au1xmmc_card_inserted(mmc)) {
+		mrq->cmd->error = -ENOMEDIUM;
+		au1xmmc_finish_request(host);
+		return;
+	}
 
 	if (mrq->data) {
 		FLUSH_FIFO(host);
-		flags = mrq->data->flags;
 		ret = au1xmmc_prepare_data(host, mrq->data);
 	}
 
@@ -682,7 +712,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
 
 static void au1xmmc_reset_controller(struct au1xmmc_host *host)
 {
-
 	/* Apply the clock */
 	au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
         au_sync_delay(1);
@@ -712,9 +741,10 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host)
 }
 
 
-static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
+static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct au1xmmc_host *host = mmc_priv(mmc);
+	u32 config2;
 
 	if (ios->power_mode == MMC_POWER_OFF)
 		au1xmmc_set_power(host, 0);
@@ -726,21 +756,18 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
 		au1xmmc_set_clock(host, ios->clock);
 		host->clock = ios->clock;
 	}
-}
-
-static void au1xmmc_dma_callback(int irq, void *dev_id)
-{
-	struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
-
-	/* Avoid spurious interrupts */
 
-	if (!host->mrq)
-		return;
-
-	if (host->flags & HOST_F_STOP)
-		SEND_STOP(host);
-
-	tasklet_schedule(&host->data_task);
+	config2 = au_readl(HOST_CONFIG2(host));
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+		config2 |= SD_CONFIG2_WB;
+		break;
+	case MMC_BUS_WIDTH_1:
+		config2 &= ~SD_CONFIG2_WB;
+		break;
+	}
+	au_writel(config2, HOST_CONFIG2(host));
+	au_sync();
 }
 
 #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
@@ -749,245 +776,354 @@ static void au1xmmc_dma_callback(int irq, void *dev_id)
 
 static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
 {
-
+	struct au1xmmc_host *host = dev_id;
 	u32 status;
-	int i, ret = 0;
-
-	disable_irq(AU1100_SD_IRQ);
 
-	for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
-		struct au1xmmc_host * host = au1xmmc_hosts[i];
-		u32 handled = 1;
+	status = au_readl(HOST_STATUS(host));
 
-		status = au_readl(HOST_STATUS(host));
+	if (!(status & SD_STATUS_I))
+		return IRQ_NONE;	/* not ours */
 
-		if (host->mrq && (status & STATUS_TIMEOUT)) {
-			if (status & SD_STATUS_RAT)
-				host->mrq->cmd->error = -ETIMEDOUT;
+	if (status & SD_STATUS_SI)	/* SDIO */
+		mmc_signal_sdio_irq(host->mmc);
 
-			else if (status & SD_STATUS_DT)
-				host->mrq->data->error = -ETIMEDOUT;
+	if (host->mrq && (status & STATUS_TIMEOUT)) {
+		if (status & SD_STATUS_RAT)
+			host->mrq->cmd->error = -ETIMEDOUT;
+		else if (status & SD_STATUS_DT)
+			host->mrq->data->error = -ETIMEDOUT;
 
-			/* In PIO mode, interrupts might still be enabled */
-			IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
+		/* In PIO mode, interrupts might still be enabled */
+		IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
 
-			//IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF);
-			tasklet_schedule(&host->finish_task);
-		}
+		/* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */
+		tasklet_schedule(&host->finish_task);
+	}
 #if 0
-		else if (status & SD_STATUS_DD) {
-
-			/* Sometimes we get a DD before a NE in PIO mode */
-
-			if (!(host->flags & HOST_F_DMA) &&
-					(status & SD_STATUS_NE))
-				au1xmmc_receive_pio(host);
-			else {
-				au1xmmc_data_complete(host, status);
-				//tasklet_schedule(&host->data_task);
-			}
+	else if (status & SD_STATUS_DD) {
+		/* Sometimes we get a DD before a NE in PIO mode */
+		if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE))
+			au1xmmc_receive_pio(host);
+		else {
+			au1xmmc_data_complete(host, status);
+			/* tasklet_schedule(&host->data_task); */
 		}
+	}
 #endif
-		else if (status & (SD_STATUS_CR)) {
-			if (host->status == HOST_S_CMD)
-				au1xmmc_cmd_complete(host,status);
-		}
-		else if (!(host->flags & HOST_F_DMA)) {
-			if ((host->flags & HOST_F_XMIT) &&
-			    (status & STATUS_DATA_OUT))
-				au1xmmc_send_pio(host);
-			else if ((host->flags & HOST_F_RECV) &&
-			    (status & STATUS_DATA_IN))
-				au1xmmc_receive_pio(host);
-		}
-		else if (status & 0x203FBC70) {
-			DBG("Unhandled status %8.8x\n", host->id, status);
-			handled = 0;
-		}
-
-		au_writel(status, HOST_STATUS(host));
-		au_sync();
-
-		ret |= handled;
+	else if (status & SD_STATUS_CR) {
+		if (host->status == HOST_S_CMD)
+			au1xmmc_cmd_complete(host, status);
+
+	} else if (!(host->flags & HOST_F_DMA)) {
+		if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT))
+			au1xmmc_send_pio(host);
+		else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN))
+			au1xmmc_receive_pio(host);
+
+	} else if (status & 0x203F3C70) {
+			DBG("Unhandled status %8.8x\n", host->pdev->id,
+				status);
 	}
 
-	enable_irq(AU1100_SD_IRQ);
-	return ret;
+	au_writel(status, HOST_STATUS(host));
+	au_sync();
+
+	return IRQ_HANDLED;
 }
 
-static void au1xmmc_poll_event(unsigned long arg)
-{
-	struct au1xmmc_host *host = (struct au1xmmc_host *) arg;
+#ifdef CONFIG_SOC_AU1200
+/* 8bit memory DMA device */
+static dbdev_tab_t au1xmmc_mem_dbdev = {
+	.dev_id		= DSCR_CMD0_ALWAYS,
+	.dev_flags	= DEV_FLAGS_ANYUSE,
+	.dev_tsize	= 0,
+	.dev_devwidth	= 8,
+	.dev_physaddr	= 0x00000000,
+	.dev_intlevel	= 0,
+	.dev_intpolarity = 0,
+};
+static int memid;
 
-	int card = au1xmmc_card_inserted(host);
-        int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
+static void au1xmmc_dbdma_callback(int irq, void *dev_id)
+{
+	struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id;
 
-	if (card != controller) {
-		host->flags &= ~HOST_F_ACTIVE;
-		if (card) host->flags |= HOST_F_ACTIVE;
-		mmc_detect_change(host->mmc, 0);
-	}
+	/* Avoid spurious interrupts */
+	if (!host->mrq)
+		return;
 
-	if (host->mrq != NULL) {
-		u32 status = au_readl(HOST_STATUS(host));
-		DBG("PENDING - %8.8x\n", host->id, status);
-	}
+	if (host->flags & HOST_F_STOP)
+		SEND_STOP(host);
 
-	mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
+	tasklet_schedule(&host->data_task);
 }
 
-static dbdev_tab_t au1xmmc_mem_dbdev =
-{
-	DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0
-};
-
-static void au1xmmc_init_dma(struct au1xmmc_host *host)
+static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
 {
+	struct resource *res;
+	int txid, rxid;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0);
+	if (!res)
+		return -ENODEV;
+	txid = res->start;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1);
+	if (!res)
+		return -ENODEV;
+	rxid = res->start;
+
+	if (!memid)
+		return -ENODEV;
+
+	host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid,
+				au1xmmc_dbdma_callback, (void *)host);
+	if (!host->tx_chan) {
+		dev_err(&host->pdev->dev, "cannot allocate TX DMA\n");
+		return -ENODEV;
+	}
 
-	u32 rxchan, txchan;
-
-	int txid = au1xmmc_card_table[host->id].tx_devid;
-	int rxid = au1xmmc_card_table[host->id].rx_devid;
+	host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid,
+				au1xmmc_dbdma_callback, (void *)host);
+	if (!host->rx_chan) {
+		dev_err(&host->pdev->dev, "cannot allocate RX DMA\n");
+		au1xxx_dbdma_chan_free(host->tx_chan);
+		return -ENODEV;
+	}
 
-	/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
-	   of 8 bits.  And since devices are shared, we need to create
-	   our own to avoid freaking out other devices
-	*/
+	au1xxx_dbdma_set_devwidth(host->tx_chan, 8);
+	au1xxx_dbdma_set_devwidth(host->rx_chan, 8);
 
-	int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+	au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT);
+	au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
 
-	txchan = au1xxx_dbdma_chan_alloc(memid, txid,
-					 au1xmmc_dma_callback, (void *) host);
+	/* DBDMA is good to go */
+	host->flags |= HOST_F_DMA;
 
-	rxchan = au1xxx_dbdma_chan_alloc(rxid, memid,
-					 au1xmmc_dma_callback, (void *) host);
+	return 0;
+}
 
-	au1xxx_dbdma_set_devwidth(txchan, 8);
-	au1xxx_dbdma_set_devwidth(rxchan, 8);
+static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
+{
+	if (host->flags & HOST_F_DMA) {
+		host->flags &= ~HOST_F_DMA;
+		au1xxx_dbdma_chan_free(host->tx_chan);
+		au1xxx_dbdma_chan_free(host->rx_chan);
+	}
+}
+#endif
 
-	au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT);
-	au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT);
+static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
+{
+	struct au1xmmc_host *host = mmc_priv(mmc);
 
-	host->tx_chan = txchan;
-	host->rx_chan = rxchan;
+	if (en)
+		IRQ_ON(host, SD_CONFIG_SI);
+	else
+		IRQ_OFF(host, SD_CONFIG_SI);
 }
 
 static const struct mmc_host_ops au1xmmc_ops = {
 	.request	= au1xmmc_request,
 	.set_ios	= au1xmmc_set_ios,
 	.get_ro		= au1xmmc_card_readonly,
+	.get_cd		= au1xmmc_card_inserted,
+	.enable_sdio_irq = au1xmmc_enable_sdio_irq,
 };
 
 static int __devinit au1xmmc_probe(struct platform_device *pdev)
 {
+	struct mmc_host *mmc;
+	struct au1xmmc_host *host;
+	struct resource *r;
+	int ret;
+
+	mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "no memory for mmc_host\n");
+		ret = -ENOMEM;
+		goto out0;
+	}
 
-	int i, ret = 0;
-
-	/* THe interrupt is shared among all controllers */
-	ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0);
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->platdata = pdev->dev.platform_data;
+	host->pdev = pdev;
 
-	if (ret) {
-		printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
-				AU1100_SD_IRQ, ret);
-		return -ENXIO;
+	ret = -ENODEV;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no mmio defined\n");
+		goto out1;
 	}
 
-	disable_irq(AU1100_SD_IRQ);
+	host->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+					   pdev->name);
+	if (!host->ioarea) {
+		dev_err(&pdev->dev, "mmio already in use\n");
+		goto out1;
+	}
 
-	for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
-		struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
-		struct au1xmmc_host *host = 0;
+	host->iobase = (unsigned long)ioremap(r->start, 0x3c);
+	if (!host->iobase) {
+		dev_err(&pdev->dev, "cannot remap mmio\n");
+		goto out2;
+	}
 
-		if (!mmc) {
-			printk(DRIVER_NAME "ERROR: no mem for host %d\n", i);
-			au1xmmc_hosts[i] = 0;
-			continue;
-		}
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		goto out3;
+	}
 
-		mmc->ops = &au1xmmc_ops;
+	host->irq = r->start;
+	/* IRQ is shared among both SD controllers */
+	ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
+			  DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot grab IRQ\n");
+		goto out3;
+	}
 
-		mmc->f_min =   450000;
-		mmc->f_max = 24000000;
+	mmc->ops = &au1xmmc_ops;
 
-		mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
-		mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
+	mmc->f_min =   450000;
+	mmc->f_max = 24000000;
 
-		mmc->max_blk_size = 2048;
-		mmc->max_blk_count = 512;
+	mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
+	mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
 
-		mmc->ocr_avail = AU1XMMC_OCR;
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 512;
 
-		host = mmc_priv(mmc);
-		host->mmc = mmc;
+	mmc->ocr_avail = AU1XMMC_OCR;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 
-		host->id = i;
-		host->iobase = au1xmmc_card_table[host->id].iobase;
-		host->clock = 0;
-		host->power_mode = MMC_POWER_OFF;
+	host->status = HOST_S_IDLE;
 
-		host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0;
-		host->status = HOST_S_IDLE;
+	/* board-specific carddetect setup, if any */
+	if (host->platdata && host->platdata->cd_setup) {
+		ret = host->platdata->cd_setup(mmc, 1);
+		if (ret) {
+			dev_warn(&pdev->dev, "board CD setup failed\n");
+			mmc->caps |= MMC_CAP_NEEDS_POLL;
+		}
+	} else
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
-		init_timer(&host->timer);
+	tasklet_init(&host->data_task, au1xmmc_tasklet_data,
+			(unsigned long)host);
 
-		host->timer.function = au1xmmc_poll_event;
-		host->timer.data = (unsigned long) host;
-		host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
+	tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
+			(unsigned long)host);
 
-		tasklet_init(&host->data_task, au1xmmc_tasklet_data,
-				(unsigned long) host);
+#ifdef CONFIG_SOC_AU1200
+	ret = au1xmmc_dbdma_init(host);
+	if (ret)
+		printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
+#endif
 
-		tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
-				(unsigned long) host);
+#ifdef CONFIG_LEDS_CLASS
+	if (host->platdata && host->platdata->led) {
+		struct led_classdev *led = host->platdata->led;
+		led->name = mmc_hostname(mmc);
+		led->brightness = LED_OFF;
+		led->default_trigger = mmc_hostname(mmc);
+		ret = led_classdev_register(mmc_dev(mmc), led);
+		if (ret)
+			goto out5;
+	}
+#endif
 
-		spin_lock_init(&host->lock);
+	au1xmmc_reset_controller(host);
 
-		if (dma != 0)
-			au1xmmc_init_dma(host);
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot add mmc host\n");
+		goto out6;
+	}
 
-		au1xmmc_reset_controller(host);
+	platform_set_drvdata(pdev, mmc);
 
-		mmc_add_host(mmc);
-		au1xmmc_hosts[i] = host;
+	printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
+		" (mode=%s)\n", pdev->id, host->iobase,
+		host->flags & HOST_F_DMA ? "dma" : "pio");
 
-		add_timer(&host->timer);
+	return 0;	/* all ok */
 
-		printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n",
-		       host->id, host->iobase, dma ? "dma" : "pio");
-	}
+out6:
+#ifdef CONFIG_LEDS_CLASS
+	if (host->platdata && host->platdata->led)
+		led_classdev_unregister(host->platdata->led);
+out5:
+#endif
+	au_writel(0, HOST_ENABLE(host));
+	au_writel(0, HOST_CONFIG(host));
+	au_writel(0, HOST_CONFIG2(host));
+	au_sync();
 
-	enable_irq(AU1100_SD_IRQ);
+#ifdef CONFIG_SOC_AU1200
+	au1xmmc_dbdma_shutdown(host);
+#endif
 
-	return 0;
+	tasklet_kill(&host->data_task);
+	tasklet_kill(&host->finish_task);
+
+	if (host->platdata && host->platdata->cd_setup &&
+	    !(mmc->caps & MMC_CAP_NEEDS_POLL))
+		host->platdata->cd_setup(mmc, 0);
+
+	free_irq(host->irq, host);
+out3:
+	iounmap((void *)host->iobase);
+out2:
+	release_resource(host->ioarea);
+	kfree(host->ioarea);
+out1:
+	mmc_free_host(mmc);
+out0:
+	return ret;
 }
 
 static int __devexit au1xmmc_remove(struct platform_device *pdev)
 {
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct au1xmmc_host *host;
+
+	if (mmc) {
+		host  = mmc_priv(mmc);
 
-	int i;
+		mmc_remove_host(mmc);
 
-	disable_irq(AU1100_SD_IRQ);
+#ifdef CONFIG_LEDS_CLASS
+		if (host->platdata && host->platdata->led)
+			led_classdev_unregister(host->platdata->led);
+#endif
 
-	for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
-		struct au1xmmc_host *host = au1xmmc_hosts[i];
-		if (!host) continue;
+		if (host->platdata && host->platdata->cd_setup &&
+		    !(mmc->caps & MMC_CAP_NEEDS_POLL))
+			host->platdata->cd_setup(mmc, 0);
+
+		au_writel(0, HOST_ENABLE(host));
+		au_writel(0, HOST_CONFIG(host));
+		au_writel(0, HOST_CONFIG2(host));
+		au_sync();
 
 		tasklet_kill(&host->data_task);
 		tasklet_kill(&host->finish_task);
 
-		del_timer_sync(&host->timer);
+#ifdef CONFIG_SOC_AU1200
+		au1xmmc_dbdma_shutdown(host);
+#endif
 		au1xmmc_set_power(host, 0);
 
-		mmc_remove_host(host->mmc);
-
-		au1xxx_dbdma_chan_free(host->tx_chan);
-		au1xxx_dbdma_chan_free(host->rx_chan);
+		free_irq(host->irq, host);
+		iounmap((void *)host->iobase);
+		release_resource(host->ioarea);
+		kfree(host->ioarea);
 
-		au_writel(0x0, HOST_ENABLE(host));
-		au_sync();
+		mmc_free_host(mmc);
 	}
-
-	free_irq(AU1100_SD_IRQ, 0);
 	return 0;
 }
 
@@ -1004,21 +1140,31 @@ static struct platform_driver au1xmmc_driver = {
 
 static int __init au1xmmc_init(void)
 {
+#ifdef CONFIG_SOC_AU1200
+	/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+	 * of 8 bits.  And since devices are shared, we need to create
+	 * our own to avoid freaking out other devices.
+	 */
+	memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+	if (!memid)
+		printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
+#endif
 	return platform_driver_register(&au1xmmc_driver);
 }
 
 static void __exit au1xmmc_exit(void)
 {
+#ifdef CONFIG_SOC_AU1200
+	if (memid)
+		au1xxx_ddma_del_device(memid);
+#endif
 	platform_driver_unregister(&au1xmmc_driver);
 }
 
 module_init(au1xmmc_init);
 module_exit(au1xmmc_exit);
 
-#ifdef MODULE
 MODULE_AUTHOR("Advanced Micro Devices, Inc");
 MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:au1xxx-mmc");
-#endif
-
diff --git a/drivers/mmc/host/au1xmmc.h b/drivers/mmc/host/au1xmmc.h
deleted file mode 100644
index 341cbdf0bac..00000000000
--- a/drivers/mmc/host/au1xmmc.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef _AU1XMMC_H_
-#define _AU1XMMC_H_
-
-/* Hardware definitions */
-
-#define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE  2048
-
-#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30  | \
-		      MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33  | \
-		      MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
-
-/* Easy access macros */
-
-#define HOST_STATUS(h)	((h)->iobase + SD_STATUS)
-#define HOST_CONFIG(h)	((h)->iobase + SD_CONFIG)
-#define HOST_ENABLE(h)	((h)->iobase + SD_ENABLE)
-#define HOST_TXPORT(h)	((h)->iobase + SD_TXPORT)
-#define HOST_RXPORT(h)	((h)->iobase + SD_RXPORT)
-#define HOST_CMDARG(h)	((h)->iobase + SD_CMDARG)
-#define HOST_BLKSIZE(h)	((h)->iobase + SD_BLKSIZE)
-#define HOST_CMD(h)	((h)->iobase + SD_CMD)
-#define HOST_CONFIG2(h)	((h)->iobase + SD_CONFIG2)
-#define HOST_TIMEOUT(h)	((h)->iobase + SD_TIMEOUT)
-#define HOST_DEBUG(h)	((h)->iobase + SD_DEBUG)
-
-#define DMA_CHANNEL(h) \
-	( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
-
-/* This gives us a hard value for the stop command that we can write directly
- * to the command register
- */
-
-#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
-
-/* This is the set of interrupts that we configure by default */
-
-#if 0
-#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
-		SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-#endif
-
-#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
-		SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
-/* The poll event (looking for insert/remove events runs twice a second */
-#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
-
-struct au1xmmc_host {
-  struct mmc_host *mmc;
-  struct mmc_request *mrq;
-
-  u32 id;
-
-  u32 flags;
-  u32 iobase;
-  u32 clock;
-  u32 bus_width;
-  u32 power_mode;
-
-  int status;
-
-   struct {
-	   int len;
-	   int dir;
-  } dma;
-
-   struct {
-	   int index;
-	   int offset;
-	   int len;
-  } pio;
-
-  u32 tx_chan;
-  u32 rx_chan;
-
-  struct timer_list timer;
-  struct tasklet_struct finish_task;
-  struct tasklet_struct data_task;
-
-  spinlock_t lock;
-};
-
-/* Status flags used by the host structure */
-
-#define HOST_F_XMIT   0x0001
-#define HOST_F_RECV   0x0002
-#define HOST_F_DMA    0x0010
-#define HOST_F_ACTIVE 0x0100
-#define HOST_F_STOP   0x1000
-
-#define HOST_S_IDLE   0x0001
-#define HOST_S_CMD    0x0002
-#define HOST_S_DATA   0x0003
-#define HOST_S_STOP   0x0004
-
-#endif
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index eed211b2ac7..5e880c0f134 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -892,9 +892,12 @@ static int imxmci_get_ro(struct mmc_host *mmc)
 	struct imxmci_host *host = mmc_priv(mmc);
 
 	if (host->pdata && host->pdata->get_ro)
-		return host->pdata->get_ro(mmc_dev(mmc));
-	/* Host doesn't support read only detection so assume writeable */
-	return 0;
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
 }
 
 
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 35508584ac2..41cc63360e4 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1126,16 +1126,28 @@ static int mmc_spi_get_ro(struct mmc_host *mmc)
 	struct mmc_spi_host *host = mmc_priv(mmc);
 
 	if (host->pdata && host->pdata->get_ro)
-		return host->pdata->get_ro(mmc->parent);
-	/* board doesn't support read only detection; assume writeable */
-	return 0;
+		return !!host->pdata->get_ro(mmc->parent);
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
 }
 
+static int mmc_spi_get_cd(struct mmc_host *mmc)
+{
+	struct mmc_spi_host *host = mmc_priv(mmc);
+
+	if (host->pdata && host->pdata->get_cd)
+		return !!host->pdata->get_cd(mmc->parent);
+	return -ENOSYS;
+}
 
 static const struct mmc_host_ops mmc_spi_ops = {
 	.request	= mmc_spi_request,
 	.set_ios	= mmc_spi_set_ios,
 	.get_ro		= mmc_spi_get_ro,
+	.get_cd		= mmc_spi_get_cd,
 };
 
 
@@ -1240,10 +1252,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 	mmc->ops = &mmc_spi_ops;
 	mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
 
-	/* As long as we keep track of the number of successfully
-	 * transmitted blocks, we're good for multiwrite.
-	 */
-	mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE;
+	mmc->caps = MMC_CAP_SPI;
 
 	/* SPI doesn't need the lowspeed device identification thing for
 	 * MMC or SD cards, since it never comes up in open drain mode.
@@ -1319,17 +1328,23 @@ static int mmc_spi_probe(struct spi_device *spi)
 			goto fail_glue_init;
 	}
 
+	/* pass platform capabilities, if any */
+	if (host->pdata)
+		mmc->caps |= host->pdata->caps;
+
 	status = mmc_add_host(mmc);
 	if (status != 0)
 		goto fail_add_host;
 
-	dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n",
+	dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
 			mmc->class_dev.bus_id,
 			host->dma_dev ? "" : ", no DMA",
 			(host->pdata && host->pdata->get_ro)
 				? "" : ", no WP",
 			(host->pdata && host->pdata->setpower)
-				? "" : ", no poweroff");
+				? "" : ", no poweroff",
+			(mmc->caps & MMC_CAP_NEEDS_POLL)
+				? ", cd polling" : "");
 	return 0;
 
 fail_add_host:
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index da5fecad74d..696cf3647ce 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -535,7 +535,6 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	mmc->f_min = (host->mclk + 511) / 512;
 	mmc->f_max = min(host->mclk, fmax);
 	mmc->ocr_avail = plat->ocr_mask;
-	mmc->caps = MMC_CAP_MULTIWRITE;
 
 	/*
 	 * We can do SGIO
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 549517c3567..dbc26eb6a89 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 
 	host->slots[id] = slot;
 
-	mmc->caps = MMC_CAP_MULTIWRITE;
+	mmc->caps = 0;
 	if (host->pdata->conf.wire4)
 		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d89475d3698..d39f5973886 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -374,9 +374,12 @@ static int pxamci_get_ro(struct mmc_host *mmc)
 	struct pxamci_host *host = mmc_priv(mmc);
 
 	if (host->pdata && host->pdata->get_ro)
-		return host->pdata->get_ro(mmc_dev(mmc));
-	/* Host doesn't support read only detection so assume writeable */
-	return 0;
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
 }
 
 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
new file mode 100644
index 00000000000..6a1e4994b72
--- /dev/null
+++ b/drivers/mmc/host/s3cmci.c
@@ -0,0 +1,1446 @@
+/*
+ *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/mci.h>
+
+#include "s3cmci.h"
+
+#define DRIVER_NAME "s3c-mci"
+
+enum dbg_channels {
+	dbg_err   = (1 << 0),
+	dbg_debug = (1 << 1),
+	dbg_info  = (1 << 2),
+	dbg_irq   = (1 << 3),
+	dbg_sg    = (1 << 4),
+	dbg_dma   = (1 << 5),
+	dbg_pio   = (1 << 6),
+	dbg_fail  = (1 << 7),
+	dbg_conf  = (1 << 8),
+};
+
+static const int dbgmap_err   = dbg_err | dbg_fail;
+static const int dbgmap_info  = dbg_info | dbg_conf;
+static const int dbgmap_debug = dbg_debug;
+
+#define dbg(host, channels, args...)		  \
+	do {					  \
+	if (dbgmap_err & channels) 		  \
+		dev_err(&host->pdev->dev, args);  \
+	else if (dbgmap_info & channels)	  \
+		dev_info(&host->pdev->dev, args); \
+	else if (dbgmap_debug & channels)	  \
+		dev_dbg(&host->pdev->dev, args);  \
+	} while (0)
+
+#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
+
+static struct s3c2410_dma_client s3cmci_dma_client = {
+	.name		= "s3c-mci",
+};
+
+static void finalize_request(struct s3cmci_host *host);
+static void s3cmci_send_request(struct mmc_host *mmc);
+static void s3cmci_reset(struct s3cmci_host *host);
+
+#ifdef CONFIG_MMC_DEBUG
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
+{
+	u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
+	u32 datcon, datcnt, datsta, fsta, imask;
+
+	con 	= readl(host->base + S3C2410_SDICON);
+	pre 	= readl(host->base + S3C2410_SDIPRE);
+	cmdarg 	= readl(host->base + S3C2410_SDICMDARG);
+	cmdcon 	= readl(host->base + S3C2410_SDICMDCON);
+	cmdsta 	= readl(host->base + S3C2410_SDICMDSTAT);
+	r0 	= readl(host->base + S3C2410_SDIRSP0);
+	r1 	= readl(host->base + S3C2410_SDIRSP1);
+	r2 	= readl(host->base + S3C2410_SDIRSP2);
+	r3 	= readl(host->base + S3C2410_SDIRSP3);
+	timer 	= readl(host->base + S3C2410_SDITIMER);
+	bsize 	= readl(host->base + S3C2410_SDIBSIZE);
+	datcon 	= readl(host->base + S3C2410_SDIDCON);
+	datcnt 	= readl(host->base + S3C2410_SDIDCNT);
+	datsta 	= readl(host->base + S3C2410_SDIDSTA);
+	fsta 	= readl(host->base + S3C2410_SDIFSTA);
+	imask   = readl(host->base + host->sdiimsk);
+
+	dbg(host, dbg_debug, "%s  CON:[%08x]  PRE:[%08x]  TMR:[%08x]\n",
+				prefix, con, pre, timer);
+
+	dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
+				prefix, cmdcon, cmdarg, cmdsta);
+
+	dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
+			       " DSTA:[%08x] DCNT:[%08x]\n",
+				prefix, datcon, fsta, datsta, datcnt);
+
+	dbg(host, dbg_debug, "%s   R0:[%08x]   R1:[%08x]"
+			       "   R2:[%08x]   R3:[%08x]\n",
+				prefix, r0, r1, r2, r3);
+}
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+			   int stop)
+{
+	snprintf(host->dbgmsg_cmd, 300,
+		 "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
+		 host->ccnt, (stop ? " (STOP)" : ""),
+		 cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
+
+	if (cmd->data) {
+		snprintf(host->dbgmsg_dat, 300,
+			 "#%u bsize:%u blocks:%u bytes:%u",
+			 host->dcnt, cmd->data->blksz,
+			 cmd->data->blocks,
+			 cmd->data->blocks * cmd->data->blksz);
+	} else {
+		host->dbgmsg_dat[0] = '\0';
+	}
+}
+
+static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
+			int fail)
+{
+	unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
+
+	if (!cmd)
+		return;
+
+	if (cmd->error == 0) {
+		dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
+			host->dbgmsg_cmd, cmd->resp[0]);
+	} else {
+		dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
+			cmd->error, host->dbgmsg_cmd, host->status);
+	}
+
+	if (!cmd->data)
+		return;
+
+	if (cmd->data->error == 0) {
+		dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
+	} else {
+		dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
+			cmd->data->error, host->dbgmsg_dat,
+			readl(host->base + S3C2410_SDIDCNT));
+	}
+}
+#else
+static void dbg_dumpcmd(struct s3cmci_host *host,
+			struct mmc_command *cmd, int fail) { }
+
+static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
+			   int stop) { }
+
+static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
+
+#endif /* CONFIG_MMC_DEBUG */
+
+static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
+{
+	u32 newmask;
+
+	newmask = readl(host->base + host->sdiimsk);
+	newmask |= imask;
+
+	writel(newmask, host->base + host->sdiimsk);
+
+	return newmask;
+}
+
+static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
+{
+	u32 newmask;
+
+	newmask = readl(host->base + host->sdiimsk);
+	newmask &= ~imask;
+
+	writel(newmask, host->base + host->sdiimsk);
+
+	return newmask;
+}
+
+static inline void clear_imask(struct s3cmci_host *host)
+{
+	writel(0, host->base + host->sdiimsk);
+}
+
+static inline int get_data_buffer(struct s3cmci_host *host,
+				  u32 *words, u32 **pointer)
+{
+	struct scatterlist *sg;
+
+	if (host->pio_active == XFER_NONE)
+		return -EINVAL;
+
+	if ((!host->mrq) || (!host->mrq->data))
+		return -EINVAL;
+
+	if (host->pio_sgptr >= host->mrq->data->sg_len) {
+		dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
+		      host->pio_sgptr, host->mrq->data->sg_len);
+		return -EBUSY;
+	}
+	sg = &host->mrq->data->sg[host->pio_sgptr];
+
+	*words = sg->length >> 2;
+	*pointer = sg_virt(sg);
+
+	host->pio_sgptr++;
+
+	dbg(host, dbg_sg, "new buffer (%i/%i)\n",
+	    host->pio_sgptr, host->mrq->data->sg_len);
+
+	return 0;
+}
+
+static inline u32 fifo_count(struct s3cmci_host *host)
+{
+	u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+	fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+	return fifostat >> 2;
+}
+
+static inline u32 fifo_free(struct s3cmci_host *host)
+{
+	u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
+
+	fifostat &= S3C2410_SDIFSTA_COUNTMASK;
+	return (63 - fifostat) >> 2;
+}
+
+static void do_pio_read(struct s3cmci_host *host)
+{
+	int res;
+	u32 fifo;
+	void __iomem *from_ptr;
+
+	/* write real prescaler to host, it might be set slow to fix */
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	from_ptr = host->base + host->sdidata;
+
+	while ((fifo = fifo_count(host))) {
+		if (!host->pio_words) {
+			res = get_data_buffer(host, &host->pio_words,
+					      &host->pio_ptr);
+			if (res) {
+				host->pio_active = XFER_NONE;
+				host->complete_what = COMPLETION_FINALIZE;
+
+				dbg(host, dbg_pio, "pio_read(): "
+				    "complete (no more data).\n");
+				return;
+			}
+
+			dbg(host, dbg_pio,
+			    "pio_read(): new target: [%i]@[%p]\n",
+			    host->pio_words, host->pio_ptr);
+		}
+
+		dbg(host, dbg_pio,
+		    "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
+		    fifo, host->pio_words,
+		    readl(host->base + S3C2410_SDIDCNT));
+
+		if (fifo > host->pio_words)
+			fifo = host->pio_words;
+
+		host->pio_words -= fifo;
+		host->pio_count += fifo;
+
+		while (fifo--)
+			*(host->pio_ptr++) = readl(from_ptr);
+	}
+
+	if (!host->pio_words) {
+		res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
+		if (res) {
+			dbg(host, dbg_pio,
+			    "pio_read(): complete (no more buffers).\n");
+			host->pio_active = XFER_NONE;
+			host->complete_what = COMPLETION_FINALIZE;
+
+			return;
+		}
+	}
+
+	enable_imask(host,
+		     S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
+}
+
+static void do_pio_write(struct s3cmci_host *host)
+{
+	void __iomem *to_ptr;
+	int res;
+	u32 fifo;
+
+	to_ptr = host->base + host->sdidata;
+
+	while ((fifo = fifo_free(host))) {
+		if (!host->pio_words) {
+			res = get_data_buffer(host, &host->pio_words,
+							&host->pio_ptr);
+			if (res) {
+				dbg(host, dbg_pio,
+				    "pio_write(): complete (no more data).\n");
+				host->pio_active = XFER_NONE;
+
+				return;
+			}
+
+			dbg(host, dbg_pio,
+			    "pio_write(): new source: [%i]@[%p]\n",
+			    host->pio_words, host->pio_ptr);
+
+		}
+
+		if (fifo > host->pio_words)
+			fifo = host->pio_words;
+
+		host->pio_words -= fifo;
+		host->pio_count += fifo;
+
+		while (fifo--)
+			writel(*(host->pio_ptr++), to_ptr);
+	}
+
+	enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+}
+
+static void pio_tasklet(unsigned long data)
+{
+	struct s3cmci_host *host = (struct s3cmci_host *) data;
+
+
+	disable_irq(host->irq);
+
+	if (host->pio_active == XFER_WRITE)
+		do_pio_write(host);
+
+	if (host->pio_active == XFER_READ)
+		do_pio_read(host);
+
+	if (host->complete_what == COMPLETION_FINALIZE) {
+		clear_imask(host);
+		if (host->pio_active != XFER_NONE) {
+			dbg(host, dbg_err, "unfinished %s "
+			    "- pio_count:[%u] pio_words:[%u]\n",
+			    (host->pio_active == XFER_READ) ? "read" : "write",
+			    host->pio_count, host->pio_words);
+
+			if (host->mrq->data)
+				host->mrq->data->error = -EINVAL;
+		}
+
+		finalize_request(host);
+	} else
+		enable_irq(host->irq);
+}
+
+/*
+ * ISR for SDI Interface IRQ
+ * Communication between driver and ISR works as follows:
+ *   host->mrq 			points to current request
+ *   host->complete_what	Indicates when the request is considered done
+ *     COMPLETION_CMDSENT	  when the command was sent
+ *     COMPLETION_RSPFIN          when a response was received
+ *     COMPLETION_XFERFINISH	  when the data transfer is finished
+ *     COMPLETION_XFERFINISH_RSPFIN both of the above.
+ *   host->complete_request	is the completion-object the driver waits for
+ *
+ * 1) Driver sets up host->mrq and host->complete_what
+ * 2) Driver prepares the transfer
+ * 3) Driver enables interrupts
+ * 4) Driver starts transfer
+ * 5) Driver waits for host->complete_rquest
+ * 6) ISR checks for request status (errors and success)
+ * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
+ * 7) ISR completes host->complete_request
+ * 8) ISR disables interrupts
+ * 9) Driver wakes up and takes care of the request
+ *
+ * Note: "->error"-fields are expected to be set to 0 before the request
+ *       was issued by mmc.c - therefore they are only set, when an error
+ *       contition comes up
+ */
+
+static irqreturn_t s3cmci_irq(int irq, void *dev_id)
+{
+	struct s3cmci_host *host = dev_id;
+	struct mmc_command *cmd;
+	u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
+	u32 mci_cclear, mci_dclear;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&host->complete_lock, iflags);
+
+	mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
+	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+	mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
+	mci_fsta = readl(host->base + S3C2410_SDIFSTA);
+	mci_imsk = readl(host->base + host->sdiimsk);
+	mci_cclear = 0;
+	mci_dclear = 0;
+
+	if ((host->complete_what == COMPLETION_NONE) ||
+	    (host->complete_what == COMPLETION_FINALIZE)) {
+		host->status = "nothing to complete";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	if (!host->mrq) {
+		host->status = "no active mrq";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
+
+	if (!cmd) {
+		host->status = "no active cmd";
+		clear_imask(host);
+		goto irq_out;
+	}
+
+	if (!host->dodma) {
+		if ((host->pio_active == XFER_WRITE) &&
+		    (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
+
+			disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+			tasklet_schedule(&host->pio_tasklet);
+			host->status = "pio tx";
+		}
+
+		if ((host->pio_active == XFER_READ) &&
+		    (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
+
+			disable_imask(host,
+				      S3C2410_SDIIMSK_RXFIFOHALF |
+				      S3C2410_SDIIMSK_RXFIFOLAST);
+
+			tasklet_schedule(&host->pio_tasklet);
+			host->status = "pio rx";
+		}
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
+		dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
+		cmd->error = -ETIMEDOUT;
+		host->status = "error: command timeout";
+		goto fail_transfer;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
+		if (host->complete_what == COMPLETION_CMDSENT) {
+			host->status = "ok: command sent";
+			goto close_transfer;
+		}
+
+		mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
+		if (cmd->flags & MMC_RSP_CRC) {
+			if (host->mrq->cmd->flags & MMC_RSP_136) {
+				dbg(host, dbg_irq,
+				    "fixup: ignore CRC fail with long rsp\n");
+			} else {
+				/* note, we used to fail the transfer
+				 * here, but it seems that this is just
+				 * the hardware getting it wrong.
+				 *
+				 * cmd->error = -EILSEQ;
+				 * host->status = "error: bad command crc";
+				 * goto fail_transfer;
+				*/
+			}
+		}
+
+		mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
+	}
+
+	if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
+		if (host->complete_what == COMPLETION_RSPFIN) {
+			host->status = "ok: command response received";
+			goto close_transfer;
+		}
+
+		if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+			host->complete_what = COMPLETION_XFERFINISH;
+
+		mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
+	}
+
+	/* errors handled after this point are only relevant
+	   when a data transfer is in progress */
+
+	if (!cmd->data)
+		goto clear_status_bits;
+
+	/* Check for FIFO failure */
+	if (host->is2440) {
+		if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
+			host->mrq->data->error = -EILSEQ;
+			host->status = "error: 2440 fifo failure";
+			goto fail_transfer;
+		}
+	} else {
+		if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
+			cmd->data->error = -EILSEQ;
+			host->status = "error:  fifo failure";
+			goto fail_transfer;
+		}
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (outgoing)\n");
+		cmd->data->error = -EILSEQ;
+		host->status = "error: bad data crc (outgoing)";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (incoming)\n");
+		cmd->data->error = -EILSEQ;
+		host->status = "error: bad data crc (incoming)";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
+		dbg(host, dbg_err, "data timeout\n");
+		cmd->data->error = -ETIMEDOUT;
+		host->status = "error: data timeout";
+		goto fail_transfer;
+	}
+
+	if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
+		if (host->complete_what == COMPLETION_XFERFINISH) {
+			host->status = "ok: data transfer completed";
+			goto close_transfer;
+		}
+
+		if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
+			host->complete_what = COMPLETION_RSPFIN;
+
+		mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
+	}
+
+clear_status_bits:
+	writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
+	writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+	goto irq_out;
+
+fail_transfer:
+	host->pio_active = XFER_NONE;
+
+close_transfer:
+	host->complete_what = COMPLETION_FINALIZE;
+
+	clear_imask(host);
+	tasklet_schedule(&host->pio_tasklet);
+
+	goto irq_out;
+
+irq_out:
+	dbg(host, dbg_irq,
+	    "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
+	    mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
+
+	spin_unlock_irqrestore(&host->complete_lock, iflags);
+	return IRQ_HANDLED;
+
+}
+
+/*
+ * ISR for the CardDetect Pin
+*/
+
+static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
+{
+	struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
+
+	dbg(host, dbg_irq, "card detect\n");
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
+			      int size, enum s3c2410_dma_buffresult result)
+{
+	struct s3cmci_host *host = buf_id;
+	unsigned long iflags;
+	u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
+
+	mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
+	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+	mci_fsta = readl(host->base + S3C2410_SDIFSTA);
+	mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
+
+	BUG_ON(!host->mrq);
+	BUG_ON(!host->mrq->data);
+	BUG_ON(!host->dmatogo);
+
+	spin_lock_irqsave(&host->complete_lock, iflags);
+
+	if (result != S3C2410_RES_OK) {
+		dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
+			"fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
+			mci_csta, mci_dsta, mci_fsta,
+			mci_dcnt, result, host->dmatogo);
+
+		goto fail_request;
+	}
+
+	host->dmatogo--;
+	if (host->dmatogo) {
+		dbg(host, dbg_dma, "DMA DONE  Size:%i DSTA:[%08x] "
+			"DCNT:[%08x] toGo:%u\n",
+			size, mci_dsta, mci_dcnt, host->dmatogo);
+
+		goto out;
+	}
+
+	dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
+		size, mci_dsta, mci_dcnt);
+
+	host->complete_what = COMPLETION_FINALIZE;
+
+out:
+	tasklet_schedule(&host->pio_tasklet);
+	spin_unlock_irqrestore(&host->complete_lock, iflags);
+	return;
+
+fail_request:
+	host->mrq->data->error = -EINVAL;
+	host->complete_what = COMPLETION_FINALIZE;
+	writel(0, host->base + host->sdiimsk);
+	goto out;
+
+}
+
+static void finalize_request(struct s3cmci_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+	int debug_as_failure = 0;
+
+	if (host->complete_what != COMPLETION_FINALIZE)
+		return;
+
+	if (!mrq)
+		return;
+
+	if (cmd->data && (cmd->error == 0) &&
+	    (cmd->data->error == 0)) {
+		if (host->dodma && (!host->dma_complete)) {
+			dbg(host, dbg_dma, "DMA Missing!\n");
+			return;
+		}
+	}
+
+	/* Read response from controller. */
+	cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
+	cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
+	cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
+	cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
+
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	if (cmd->error)
+		debug_as_failure = 1;
+
+	if (cmd->data && cmd->data->error)
+		debug_as_failure = 1;
+
+	dbg_dumpcmd(host, cmd, debug_as_failure);
+
+	/* Cleanup controller */
+	writel(0, host->base + S3C2410_SDICMDARG);
+	writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+	writel(0, host->base + S3C2410_SDICMDCON);
+	writel(0, host->base + host->sdiimsk);
+
+	if (cmd->data && cmd->error)
+		cmd->data->error = cmd->error;
+
+	if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
+		host->cmd_is_stop = 1;
+		s3cmci_send_request(host->mmc);
+		return;
+	}
+
+	/* If we have no data transfer we are finished here */
+	if (!mrq->data)
+		goto request_done;
+
+	/* Calulate the amout of bytes transfer if there was no error */
+	if (mrq->data->error == 0) {
+		mrq->data->bytes_xfered =
+			(mrq->data->blocks * mrq->data->blksz);
+	} else {
+		mrq->data->bytes_xfered = 0;
+	}
+
+	/* If we had an error while transfering data we flush the
+	 * DMA channel and the fifo to clear out any garbage. */
+	if (mrq->data->error != 0) {
+		if (host->dodma)
+			s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+
+		if (host->is2440) {
+			/* Clear failure register and reset fifo. */
+			writel(S3C2440_SDIFSTA_FIFORESET |
+			       S3C2440_SDIFSTA_FIFOFAIL,
+			       host->base + S3C2410_SDIFSTA);
+		} else {
+			u32 mci_con;
+
+			/* reset fifo */
+			mci_con = readl(host->base + S3C2410_SDICON);
+			mci_con |= S3C2410_SDICON_FIFORESET;
+
+			writel(mci_con, host->base + S3C2410_SDICON);
+		}
+	}
+
+request_done:
+	host->complete_what = COMPLETION_NONE;
+	host->mrq = NULL;
+	mmc_request_done(host->mmc, mrq);
+}
+
+
+void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+{
+	static enum s3c2410_dmasrc last_source = -1;
+	static int setup_ok;
+
+	if (last_source == source)
+		return;
+
+	last_source = source;
+
+	s3c2410_dma_devconfig(host->dma, source, 3,
+			      host->mem->start + host->sdidata);
+
+	if (!setup_ok) {
+		s3c2410_dma_config(host->dma, 4,
+			(S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+		s3c2410_dma_set_buffdone_fn(host->dma,
+					    s3cmci_dma_done_callback);
+		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+		setup_ok = 1;
+	}
+}
+
+static void s3cmci_send_command(struct s3cmci_host *host,
+					struct mmc_command *cmd)
+{
+	u32 ccon, imsk;
+
+	imsk  = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
+		S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
+		S3C2410_SDIIMSK_RESPONSECRC;
+
+	enable_imask(host, imsk);
+
+	if (cmd->data)
+		host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
+	else if (cmd->flags & MMC_RSP_PRESENT)
+		host->complete_what = COMPLETION_RSPFIN;
+	else
+		host->complete_what = COMPLETION_CMDSENT;
+
+	writel(cmd->arg, host->base + S3C2410_SDICMDARG);
+
+	ccon  = cmd->opcode & S3C2410_SDICMDCON_INDEX;
+	ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
+
+	if (cmd->flags & MMC_RSP_PRESENT)
+		ccon |= S3C2410_SDICMDCON_WAITRSP;
+
+	if (cmd->flags & MMC_RSP_136)
+		ccon |= S3C2410_SDICMDCON_LONGRSP;
+
+	writel(ccon, host->base + S3C2410_SDICMDCON);
+}
+
+static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
+{
+	u32 dcon, imsk, stoptries = 3;
+
+	/* write DCON register */
+
+	if (!data) {
+		writel(0, host->base + S3C2410_SDIDCON);
+		return 0;
+	}
+
+	if ((data->blksz & 3) != 0) {
+		/* We cannot deal with unaligned blocks with more than
+		 * one block being transfered. */
+
+		if (data->blocks > 1)
+			return -EINVAL;
+
+		/* No support yet for non-word block transfers. */
+		return -EINVAL;
+	}
+
+	while (readl(host->base + S3C2410_SDIDSTA) &
+	       (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
+
+		dbg(host, dbg_err,
+		    "mci_setup_data() transfer stillin progress.\n");
+
+		writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
+		s3cmci_reset(host);
+
+		if ((stoptries--) == 0) {
+			dbg_dumpregs(host, "DRF");
+			return -EINVAL;
+		}
+	}
+
+	dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
+
+	if (host->dodma)
+		dcon |= S3C2410_SDIDCON_DMAEN;
+
+	if (host->bus_width == MMC_BUS_WIDTH_4)
+		dcon |= S3C2410_SDIDCON_WIDEBUS;
+
+	if (!(data->flags & MMC_DATA_STREAM))
+		dcon |= S3C2410_SDIDCON_BLOCKMODE;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		dcon |= S3C2410_SDIDCON_TXAFTERRESP;
+		dcon |= S3C2410_SDIDCON_XFER_TXSTART;
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		dcon |= S3C2410_SDIDCON_RXAFTERCMD;
+		dcon |= S3C2410_SDIDCON_XFER_RXSTART;
+	}
+
+	if (host->is2440) {
+		dcon |= S3C2440_SDIDCON_DS_WORD;
+		dcon |= S3C2440_SDIDCON_DATSTART;
+	}
+
+	writel(dcon, host->base + S3C2410_SDIDCON);
+
+	/* write BSIZE register */
+
+	writel(data->blksz, host->base + S3C2410_SDIBSIZE);
+
+	/* add to IMASK register */
+	imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
+	       S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
+
+	enable_imask(host, imsk);
+
+	/* write TIMER register */
+
+	if (host->is2440) {
+		writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
+	} else {
+		writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
+
+		/* FIX: set slow clock to prevent timeouts on read */
+		if (data->flags & MMC_DATA_READ)
+			writel(0xFF, host->base + S3C2410_SDIPRE);
+	}
+
+	return 0;
+}
+
+#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
+
+static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
+{
+	int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+
+	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+	host->pio_sgptr = 0;
+	host->pio_words = 0;
+	host->pio_count = 0;
+	host->pio_active = rw ? XFER_WRITE : XFER_READ;
+
+	if (rw) {
+		do_pio_write(host);
+		enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
+	} else {
+		enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
+			     | S3C2410_SDIIMSK_RXFIFOLAST);
+	}
+
+	return 0;
+}
+
+static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
+{
+	int dma_len, i;
+	int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+
+	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
+
+	s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+
+	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+			     (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	if (dma_len == 0)
+		return -ENOMEM;
+
+	host->dma_complete = 0;
+	host->dmatogo = dma_len;
+
+	for (i = 0; i < dma_len; i++) {
+		int res;
+
+		dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
+			sg_dma_address(&data->sg[i]),
+			sg_dma_len(&data->sg[i]));
+
+		res = s3c2410_dma_enqueue(host->dma, (void *) host,
+					  sg_dma_address(&data->sg[i]),
+					  sg_dma_len(&data->sg[i]));
+
+		if (res) {
+			s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
+			return -EBUSY;
+		}
+	}
+
+	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
+
+	return 0;
+}
+
+static void s3cmci_send_request(struct mmc_host *mmc)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
+
+	host->ccnt++;
+	prepare_dbgmsg(host, cmd, host->cmd_is_stop);
+
+	/* Clear command, data and fifo status registers
+	   Fifo clear only necessary on 2440, but doesn't hurt on 2410
+	*/
+	writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
+	writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
+	writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
+
+	if (cmd->data) {
+		int res = s3cmci_setup_data(host, cmd->data);
+
+		host->dcnt++;
+
+		if (res) {
+			dbg(host, dbg_err, "setup data error %d\n", res);
+			cmd->error = res;
+			cmd->data->error = res;
+
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+
+		if (host->dodma)
+			res = s3cmci_prepare_dma(host, cmd->data);
+		else
+			res = s3cmci_prepare_pio(host, cmd->data);
+
+		if (res) {
+			dbg(host, dbg_err, "data prepare error %d\n", res);
+			cmd->error = res;
+			cmd->data->error = res;
+
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	/* Send command */
+	s3cmci_send_command(host, cmd);
+
+	/* Enable Interrupt */
+	enable_irq(host->irq);
+}
+
+static int s3cmci_card_present(struct s3cmci_host *host)
+{
+	struct s3c24xx_mci_pdata *pdata = host->pdata;
+	int ret;
+
+	if (pdata->gpio_detect == 0)
+		return -ENOSYS;
+
+	ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+	return ret ^ pdata->detect_invert;
+}
+
+static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+
+	host->status = "mmc request";
+	host->cmd_is_stop = 0;
+	host->mrq = mrq;
+
+	if (s3cmci_card_present(host) == 0) {
+		dbg(host, dbg_err, "%s: no medium present\n", __func__);
+		host->mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+	} else
+		s3cmci_send_request(mmc);
+}
+
+static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	u32 mci_psc, mci_con;
+
+	/* Set the power state */
+
+	mci_con = readl(host->base + S3C2410_SDICON);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
+		s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
+		s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
+		s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+
+		if (host->pdata->set_power)
+			host->pdata->set_power(ios->power_mode, ios->vdd);
+
+		if (!host->is2440)
+			mci_con |= S3C2410_SDICON_FIFORESET;
+
+		break;
+
+	case MMC_POWER_OFF:
+	default:
+		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+
+		if (host->is2440)
+			mci_con |= S3C2440_SDICON_SDRESET;
+
+		if (host->pdata->set_power)
+			host->pdata->set_power(ios->power_mode, ios->vdd);
+
+		break;
+	}
+
+	/* Set clock */
+	for (mci_psc = 0; mci_psc < 255; mci_psc++) {
+		host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
+
+		if (host->real_rate <= ios->clock)
+			break;
+	}
+
+	if (mci_psc > 255)
+		mci_psc = 255;
+
+	host->prescaler = mci_psc;
+	writel(host->prescaler, host->base + S3C2410_SDIPRE);
+
+	/* If requested clock is 0, real_rate will be 0, too */
+	if (ios->clock == 0)
+		host->real_rate = 0;
+
+	/* Set CLOCK_ENABLE */
+	if (ios->clock)
+		mci_con |= S3C2410_SDICON_CLOCKTYPE;
+	else
+		mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
+
+	writel(mci_con, host->base + S3C2410_SDICON);
+
+	if ((ios->power_mode == MMC_POWER_ON) ||
+	    (ios->power_mode == MMC_POWER_UP)) {
+		dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
+			host->real_rate/1000, ios->clock/1000);
+	} else {
+		dbg(host, dbg_conf, "powered down.\n");
+	}
+
+	host->bus_width = ios->bus_width;
+}
+
+static void s3cmci_reset(struct s3cmci_host *host)
+{
+	u32 con = readl(host->base + S3C2410_SDICON);
+
+	con |= S3C2440_SDICON_SDRESET;
+	writel(con, host->base + S3C2410_SDICON);
+}
+
+static int s3cmci_get_ro(struct mmc_host *mmc)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	struct s3c24xx_mci_pdata *pdata = host->pdata;
+	int ret;
+
+	if (pdata->gpio_wprotect == 0)
+		return 0;
+
+	ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
+
+	if (pdata->wprotect_invert)
+		ret = !ret;
+
+	return ret;
+}
+
+static struct mmc_host_ops s3cmci_ops = {
+	.request	= s3cmci_request,
+	.set_ios	= s3cmci_set_ios,
+	.get_ro		= s3cmci_get_ro,
+};
+
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+	/* This is currently here to avoid a number of if (host->pdata)
+	 * checks. Any zero fields to ensure reaonable defaults are picked. */
+};
+
+static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+{
+	struct s3cmci_host *host;
+	struct mmc_host	*mmc;
+	int ret;
+
+	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc 	= mmc;
+	host->pdev	= pdev;
+	host->is2440	= is2440;
+
+	host->pdata = pdev->dev.platform_data;
+	if (!host->pdata) {
+		pdev->dev.platform_data = &s3cmci_def_pdata;
+		host->pdata = &s3cmci_def_pdata;
+	}
+
+	spin_lock_init(&host->complete_lock);
+	tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+
+	if (is2440) {
+		host->sdiimsk	= S3C2440_SDIIMSK;
+		host->sdidata	= S3C2440_SDIDATA;
+		host->clk_div	= 1;
+	} else {
+		host->sdiimsk	= S3C2410_SDIIMSK;
+		host->sdidata	= S3C2410_SDIDATA;
+		host->clk_div	= 2;
+	}
+
+	host->dodma		= 0;
+	host->complete_what 	= COMPLETION_NONE;
+	host->pio_active 	= XFER_NONE;
+
+	host->dma		= S3CMCI_DMA;
+
+	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mem) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resouce.\n");
+
+		ret = -ENOENT;
+		goto probe_free_host;
+	}
+
+	host->mem = request_mem_region(host->mem->start,
+				       RESSIZE(host->mem), pdev->name);
+
+	if (!host->mem) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_free_host;
+	}
+
+	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+	if (host->base == 0) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region;
+	}
+
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq == 0) {
+		dev_err(&pdev->dev, "failed to get interrupt resouce.\n");
+		ret = -EINVAL;
+		goto probe_iounmap;
+	}
+
+	if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
+		dev_err(&pdev->dev, "failed to request mci interrupt.\n");
+		ret = -ENOENT;
+		goto probe_iounmap;
+	}
+
+	/* We get spurious interrupts even when we have set the IMSK
+	 * register to ignore everything, so use disable_irq() to make
+	 * ensure we don't lock the system with un-serviceable requests. */
+
+	disable_irq(host->irq);
+
+	host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+
+	if (host->irq_cd >= 0) {
+		if (request_irq(host->irq_cd, s3cmci_irq_cd,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				DRIVER_NAME, host)) {
+			dev_err(&pdev->dev, "can't get card detect irq.\n");
+			ret = -ENOENT;
+			goto probe_free_irq;
+		}
+	} else {
+		dev_warn(&pdev->dev, "host detect has no irq available\n");
+		s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
+				    S3C2410_GPIO_INPUT);
+	}
+
+	if (host->pdata->gpio_wprotect)
+		s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
+				    S3C2410_GPIO_INPUT);
+
+	if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
+		dev_err(&pdev->dev, "unable to get DMA channel.\n");
+		ret = -EBUSY;
+		goto probe_free_irq_cd;
+	}
+
+	host->clk = clk_get(&pdev->dev, "sdi");
+	if (IS_ERR(host->clk)) {
+		dev_err(&pdev->dev, "failed to find clock source.\n");
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto probe_free_host;
+	}
+
+	ret = clk_enable(host->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock source.\n");
+		goto clk_free;
+	}
+
+	host->clk_rate = clk_get_rate(host->clk);
+
+	mmc->ops 	= &s3cmci_ops;
+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps	= MMC_CAP_4_BIT_DATA;
+	mmc->f_min 	= host->clk_rate / (host->clk_div * 256);
+	mmc->f_max 	= host->clk_rate / host->clk_div;
+
+	if (host->pdata->ocr_avail)
+		mmc->ocr_avail = host->pdata->ocr_avail;
+
+	mmc->max_blk_count	= 4095;
+	mmc->max_blk_size	= 4095;
+	mmc->max_req_size	= 4095 * 512;
+	mmc->max_seg_size	= mmc->max_req_size;
+
+	mmc->max_phys_segs	= 128;
+	mmc->max_hw_segs	= 128;
+
+	dbg(host, dbg_debug,
+	    "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
+	    (host->is2440?"2440":""),
+	    host->base, host->irq, host->irq_cd, host->dma);
+
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host.\n");
+		goto free_dmabuf;
+	}
+
+	platform_set_drvdata(pdev, mmc);
+	dev_info(&pdev->dev, "initialisation done.\n");
+
+	return 0;
+
+ free_dmabuf:
+	clk_disable(host->clk);
+
+ clk_free:
+	clk_put(host->clk);
+
+ probe_free_irq_cd:
+	if (host->irq_cd >= 0)
+		free_irq(host->irq_cd, host);
+
+ probe_free_irq:
+	free_irq(host->irq, host);
+
+ probe_iounmap:
+	iounmap(host->base);
+
+ probe_free_mem_region:
+	release_mem_region(host->mem->start, RESSIZE(host->mem));
+
+ probe_free_host:
+	mmc_free_host(mmc);
+ probe_out:
+	return ret;
+}
+
+static int __devexit s3cmci_remove(struct platform_device *pdev)
+{
+	struct mmc_host		*mmc  = platform_get_drvdata(pdev);
+	struct s3cmci_host	*host = mmc_priv(mmc);
+
+	mmc_remove_host(mmc);
+
+	clk_disable(host->clk);
+	clk_put(host->clk);
+
+	tasklet_disable(&host->pio_tasklet);
+	s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
+
+	if (host->irq_cd >= 0)
+		free_irq(host->irq_cd, host);
+	free_irq(host->irq, host);
+
+	iounmap(host->base);
+	release_mem_region(host->mem->start, RESSIZE(host->mem));
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static int __devinit s3cmci_probe_2410(struct platform_device *dev)
+{
+	return s3cmci_probe(dev, 0);
+}
+
+static int __devinit s3cmci_probe_2412(struct platform_device *dev)
+{
+	return s3cmci_probe(dev, 1);
+}
+
+static int __devinit s3cmci_probe_2440(struct platform_device *dev)
+{
+	return s3cmci_probe(dev, 1);
+}
+
+#ifdef CONFIG_PM
+
+static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+
+	return  mmc_suspend_host(mmc, state);
+}
+
+static int s3cmci_resume(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+
+	return mmc_resume_host(mmc);
+}
+
+#else /* CONFIG_PM */
+#define s3cmci_suspend NULL
+#define s3cmci_resume NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver s3cmci_driver_2410 = {
+	.driver.name	= "s3c2410-sdi",
+	.driver.owner	= THIS_MODULE,
+	.probe		= s3cmci_probe_2410,
+	.remove		= __devexit_p(s3cmci_remove),
+	.suspend	= s3cmci_suspend,
+	.resume		= s3cmci_resume,
+};
+
+static struct platform_driver s3cmci_driver_2412 = {
+	.driver.name	= "s3c2412-sdi",
+	.driver.owner	= THIS_MODULE,
+	.probe		= s3cmci_probe_2412,
+	.remove		= __devexit_p(s3cmci_remove),
+	.suspend	= s3cmci_suspend,
+	.resume		= s3cmci_resume,
+};
+
+static struct platform_driver s3cmci_driver_2440 = {
+	.driver.name	= "s3c2440-sdi",
+	.driver.owner	= THIS_MODULE,
+	.probe		= s3cmci_probe_2440,
+	.remove		= __devexit_p(s3cmci_remove),
+	.suspend	= s3cmci_suspend,
+	.resume		= s3cmci_resume,
+};
+
+
+static int __init s3cmci_init(void)
+{
+	platform_driver_register(&s3cmci_driver_2410);
+	platform_driver_register(&s3cmci_driver_2412);
+	platform_driver_register(&s3cmci_driver_2440);
+	return 0;
+}
+
+static void __exit s3cmci_exit(void)
+{
+	platform_driver_unregister(&s3cmci_driver_2410);
+	platform_driver_unregister(&s3cmci_driver_2412);
+	platform_driver_unregister(&s3cmci_driver_2440);
+}
+
+module_init(s3cmci_init);
+module_exit(s3cmci_exit);
+
+MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>");
+MODULE_ALIAS("platform:s3c2410-sdi");
+MODULE_ALIAS("platform:s3c2412-sdi");
+MODULE_ALIAS("platform:s3c2440-sdi");
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
new file mode 100644
index 00000000000..37d9c60010c
--- /dev/null
+++ b/drivers/mmc/host/s3cmci.h
@@ -0,0 +1,70 @@
+/*
+ *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ *  Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* FIXME: DMA Resource management ?! */
+#define S3CMCI_DMA 0
+
+enum s3cmci_waitfor {
+	COMPLETION_NONE,
+	COMPLETION_FINALIZE,
+	COMPLETION_CMDSENT,
+	COMPLETION_RSPFIN,
+	COMPLETION_XFERFINISH,
+	COMPLETION_XFERFINISH_RSPFIN,
+};
+
+struct s3cmci_host {
+	struct platform_device	*pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	struct mmc_host		*mmc;
+	struct resource		*mem;
+	struct clk		*clk;
+	void __iomem		*base;
+	int			irq;
+	int			irq_cd;
+	int			dma;
+
+	unsigned long		clk_rate;
+	unsigned long		clk_div;
+	unsigned long		real_rate;
+	u8			prescaler;
+
+	int			is2440;
+	unsigned		sdiimsk;
+	unsigned		sdidata;
+	int			dodma;
+	int			dmatogo;
+
+	struct mmc_request	*mrq;
+	int			cmd_is_stop;
+
+	spinlock_t		complete_lock;
+	enum s3cmci_waitfor	complete_what;
+
+	int			dma_complete;
+
+	u32			pio_sgptr;
+	u32			pio_words;
+	u32			pio_count;
+	u32			*pio_ptr;
+#define XFER_NONE 0
+#define XFER_READ 1
+#define XFER_WRITE 2
+	u32			pio_active;
+
+	int			bus_width;
+
+	char 			dbgmsg_cmd[301];
+	char 			dbgmsg_dat[301];
+	char			*status;
+
+	unsigned int		ccnt, dcnt;
+	struct tasklet_struct	pio_tasklet;
+};
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
new file mode 100644
index 00000000000..deb607c52c0
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -0,0 +1,732 @@
+/*  linux/drivers/mmc/host/sdhci-pci.c - SDHCI on PCI bus interface
+ *
+ *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ *     - JMicron (hardware and technical support)
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#include "sdhci.h"
+
+/*
+ * PCI registers
+ */
+
+#define PCI_SDHCI_IFPIO			0x00
+#define PCI_SDHCI_IFDMA			0x01
+#define PCI_SDHCI_IFVENDOR		0x02
+
+#define PCI_SLOT_INFO			0x40	/* 8 bits */
+#define  PCI_SLOT_INFO_SLOTS(x)		((x >> 4) & 7)
+#define  PCI_SLOT_INFO_FIRST_BAR_MASK	0x07
+
+#define MAX_SLOTS			8
+
+struct sdhci_pci_chip;
+struct sdhci_pci_slot;
+
+struct sdhci_pci_fixes {
+	unsigned int		quirks;
+
+	int			(*probe)(struct sdhci_pci_chip*);
+
+	int			(*probe_slot)(struct sdhci_pci_slot*);
+	void			(*remove_slot)(struct sdhci_pci_slot*, int);
+
+	int			(*suspend)(struct sdhci_pci_chip*,
+					pm_message_t);
+	int			(*resume)(struct sdhci_pci_chip*);
+};
+
+struct sdhci_pci_slot {
+	struct sdhci_pci_chip	*chip;
+	struct sdhci_host	*host;
+
+	int			pci_bar;
+};
+
+struct sdhci_pci_chip {
+	struct pci_dev		*pdev;
+
+	unsigned int		quirks;
+	const struct sdhci_pci_fixes *fixes;
+
+	int			num_slots;	/* Slots on controller */
+	struct sdhci_pci_slot	*slots[MAX_SLOTS]; /* Pointers to host slots */
+};
+
+
+/*****************************************************************************\
+ *                                                                           *
+ * Hardware specific quirk handling                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int ricoh_probe(struct sdhci_pci_chip *chip)
+{
+	if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
+		chip->quirks |= SDHCI_QUIRK_CLOCK_BEFORE_RESET;
+
+	if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)
+		chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_ricoh = {
+	.probe		= ricoh_probe,
+	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR,
+};
+
+static const struct sdhci_pci_fixes sdhci_ene_712 = {
+	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
+			  SDHCI_QUIRK_BROKEN_DMA,
+};
+
+static const struct sdhci_pci_fixes sdhci_ene_714 = {
+	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
+			  SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+			  SDHCI_QUIRK_BROKEN_DMA,
+};
+
+static const struct sdhci_pci_fixes sdhci_cafe = {
+	.quirks		= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+			  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+};
+
+static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
+{
+	u8 scratch;
+	int ret;
+
+	ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch);
+	if (ret)
+		return ret;
+
+	/*
+	 * Turn PMOS on [bit 0], set over current detection to 2.4 V
+	 * [bit 1:2] and enable over current debouncing [bit 6].
+	 */
+	if (on)
+		scratch |= 0x47;
+	else
+		scratch &= ~0x47;
+
+	ret = pci_write_config_byte(chip->pdev, 0xAE, scratch);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int jmicron_probe(struct sdhci_pci_chip *chip)
+{
+	int ret;
+
+	if (chip->pdev->revision == 0) {
+		chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
+			  SDHCI_QUIRK_32BIT_DMA_SIZE |
+			  SDHCI_QUIRK_32BIT_ADMA_SIZE |
+			  SDHCI_QUIRK_RESET_AFTER_REQUEST;
+	}
+
+	/*
+	 * JMicron chips can have two interfaces to the same hardware
+	 * in order to work around limitations in Microsoft's driver.
+	 * We need to make sure we only bind to one of them.
+	 *
+	 * This code assumes two things:
+	 *
+	 * 1. The PCI code adds subfunctions in order.
+	 *
+	 * 2. The MMC interface has a lower subfunction number
+	 *    than the SD interface.
+	 */
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) {
+		struct pci_dev *sd_dev;
+
+		sd_dev = NULL;
+		while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
+			PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) {
+			if ((PCI_SLOT(chip->pdev->devfn) ==
+				PCI_SLOT(sd_dev->devfn)) &&
+				(chip->pdev->bus == sd_dev->bus))
+				break;
+		}
+
+		if (sd_dev) {
+			pci_dev_put(sd_dev);
+			dev_info(&chip->pdev->dev, "Refusing to bind to "
+				"secondary interface.\n");
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * JMicron chips need a bit of a nudge to enable the power
+	 * output pins.
+	 */
+	ret = jmicron_pmos(chip, 1);
+	if (ret) {
+		dev_err(&chip->pdev->dev, "Failure enabling card power\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void jmicron_enable_mmc(struct sdhci_host *host, int on)
+{
+	u8 scratch;
+
+	scratch = readb(host->ioaddr + 0xC0);
+
+	if (on)
+		scratch |= 0x01;
+	else
+		scratch &= ~0x01;
+
+	writeb(scratch, host->ioaddr + 0xC0);
+}
+
+static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
+{
+	if (slot->chip->pdev->revision == 0) {
+		u16 version;
+
+		version = readl(slot->host->ioaddr + SDHCI_HOST_VERSION);
+		version = (version & SDHCI_VENDOR_VER_MASK) >>
+			SDHCI_VENDOR_VER_SHIFT;
+
+		/*
+		 * Older versions of the chip have lots of nasty glitches
+		 * in the ADMA engine. It's best just to avoid it
+		 * completely.
+		 */
+		if (version < 0xAC)
+			slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+	}
+
+	/*
+	 * The secondary interface requires a bit set to get the
+	 * interrupts.
+	 */
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+		jmicron_enable_mmc(slot->host, 1);
+
+	return 0;
+}
+
+static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
+{
+	if (dead)
+		return;
+
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+		jmicron_enable_mmc(slot->host, 0);
+}
+
+static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
+{
+	int i;
+
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+		for (i = 0;i < chip->num_slots;i++)
+			jmicron_enable_mmc(chip->slots[i]->host, 0);
+	}
+
+	return 0;
+}
+
+static int jmicron_resume(struct sdhci_pci_chip *chip)
+{
+	int ret, i;
+
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+		for (i = 0;i < chip->num_slots;i++)
+			jmicron_enable_mmc(chip->slots[i]->host, 1);
+	}
+
+	ret = jmicron_pmos(chip, 1);
+	if (ret) {
+		dev_err(&chip->pdev->dev, "Failure enabling card power\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_jmicron = {
+	.probe		= jmicron_probe,
+
+	.probe_slot	= jmicron_probe_slot,
+	.remove_slot	= jmicron_remove_slot,
+
+	.suspend	= jmicron_suspend,
+	.resume		= jmicron_resume,
+};
+
+static const struct pci_device_id pci_ids[] __devinitdata = {
+	{
+		.vendor		= PCI_VENDOR_ID_RICOH,
+		.device		= PCI_DEVICE_ID_RICOH_R5C822,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_ricoh,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_ene_712,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_DEVICE_ID_ENE_CB712_SD_2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_ene_712,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_DEVICE_ID_ENE_CB714_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_ene_714,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_DEVICE_ID_ENE_CB714_SD_2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_ene_714,
+	},
+
+	{
+		.vendor         = PCI_VENDOR_ID_MARVELL,
+		.device         = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.driver_data    = (kernel_ulong_t)&sdhci_cafe,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_JMICRON,
+		.device		= PCI_DEVICE_ID_JMICRON_JMB38X_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_JMICRON,
+		.device		= PCI_DEVICE_ID_JMICRON_JMB38X_MMC,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
+	},
+
+	{	/* Generic SD host controller */
+		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
+	},
+
+	{ /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+
+static int sdhci_pci_enable_dma(struct sdhci_host *host)
+{
+	struct sdhci_pci_slot *slot;
+	struct pci_dev *pdev;
+	int ret;
+
+	slot = sdhci_priv(host);
+	pdev = slot->chip->pdev;
+
+	if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
+		((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
+		(host->flags & SDHCI_USE_DMA)) {
+		dev_warn(&pdev->dev, "Will use DMA mode even though HW "
+			"doesn't fully claim to support it.\n");
+	}
+
+	ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (ret)
+		return ret;
+
+	pci_set_master(pdev);
+
+	return 0;
+}
+
+static struct sdhci_ops sdhci_pci_ops = {
+	.enable_dma	= sdhci_pci_enable_dma,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Suspend/resume                                                            *
+ *                                                                           *
+\*****************************************************************************/
+
+#ifdef CONFIG_PM
+
+static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_pci_slot *slot;
+	int i, ret;
+
+	chip = pci_get_drvdata(pdev);
+	if (!chip)
+		return 0;
+
+	for (i = 0;i < chip->num_slots;i++) {
+		slot = chip->slots[i];
+		if (!slot)
+			continue;
+
+		ret = sdhci_suspend_host(slot->host, state);
+
+		if (ret) {
+			for (i--;i >= 0;i--)
+				sdhci_resume_host(chip->slots[i]->host);
+			return ret;
+		}
+	}
+
+	if (chip->fixes && chip->fixes->suspend) {
+		ret = chip->fixes->suspend(chip, state);
+		if (ret) {
+			for (i = chip->num_slots - 1;i >= 0;i--)
+				sdhci_resume_host(chip->slots[i]->host);
+			return ret;
+		}
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int sdhci_pci_resume (struct pci_dev *pdev)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_pci_slot *slot;
+	int i, ret;
+
+	chip = pci_get_drvdata(pdev);
+	if (!chip)
+		return 0;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	if (chip->fixes && chip->fixes->resume) {
+		ret = chip->fixes->resume(chip);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0;i < chip->num_slots;i++) {
+		slot = chip->slots[i];
+		if (!slot)
+			continue;
+
+		ret = sdhci_resume_host(slot->host);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define sdhci_pci_suspend NULL
+#define sdhci_pci_resume NULL
+
+#endif /* CONFIG_PM */
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
+	struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar)
+{
+	struct sdhci_pci_slot *slot;
+	struct sdhci_host *host;
+
+	resource_size_t addr;
+
+	int ret;
+
+	if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+		dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar);
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (pci_resource_len(pdev, bar) != 0x100) {
+		dev_err(&pdev->dev, "Invalid iomem size. You may "
+			"experience problems.\n");
+	}
+
+	if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+		dev_err(&pdev->dev, "Vendor specific interface. Aborting.\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
+		dev_err(&pdev->dev, "Unknown interface. Aborting.\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto unmap;
+	}
+
+	slot = sdhci_priv(host);
+
+	slot->chip = chip;
+	slot->host = host;
+	slot->pci_bar = bar;
+
+	host->hw_name = "PCI";
+	host->ops = &sdhci_pci_ops;
+	host->quirks = chip->quirks;
+
+	host->irq = pdev->irq;
+
+	ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
+	if (ret) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		return ERR_PTR(ret);
+	}
+
+	addr = pci_resource_start(pdev, bar);
+	host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		goto release;
+	}
+
+	if (chip->fixes && chip->fixes->probe_slot) {
+		ret = chip->fixes->probe_slot(slot);
+		if (ret)
+			goto unmap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto remove;
+
+	return slot;
+
+remove:
+	if (chip->fixes && chip->fixes->remove_slot)
+		chip->fixes->remove_slot(slot, 0);
+
+unmap:
+	iounmap(host->ioaddr);
+
+release:
+	pci_release_region(pdev, bar);
+	sdhci_free_host(host);
+
+	return ERR_PTR(ret);
+}
+
+static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
+{
+	int dead;
+	u32 scratch;
+
+	dead = 0;
+	scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(slot->host, dead);
+
+	if (slot->chip->fixes && slot->chip->fixes->remove_slot)
+		slot->chip->fixes->remove_slot(slot, dead);
+
+	pci_release_region(slot->chip->pdev, slot->pci_bar);
+
+	sdhci_free_host(slot->host);
+}
+
+static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_pci_slot *slot;
+
+	u8 slots, rev, first_bar;
+	int ret, i;
+
+	BUG_ON(pdev == NULL);
+	BUG_ON(ent == NULL);
+
+	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+
+	dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n",
+		 (int)pdev->vendor, (int)pdev->device, (int)rev);
+
+	ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
+	if (ret)
+		return ret;
+
+	slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
+	dev_dbg(&pdev->dev, "found %d slot(s)\n", slots);
+	if (slots == 0)
+		return -ENODEV;
+
+	BUG_ON(slots > MAX_SLOTS);
+
+	ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
+	if (ret)
+		return ret;
+
+	first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
+
+	if (first_bar > 5) {
+		dev_err(&pdev->dev, "Invalid first BAR. Aborting.\n");
+		return -ENODEV;
+	}
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL);
+	if (!chip) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	chip->pdev = pdev;
+	chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data;
+	if (chip->fixes)
+		chip->quirks = chip->fixes->quirks;
+	chip->num_slots = slots;
+
+	pci_set_drvdata(pdev, chip);
+
+	if (chip->fixes && chip->fixes->probe) {
+		ret = chip->fixes->probe(chip);
+		if (ret)
+			goto free;
+	}
+
+	for (i = 0;i < slots;i++) {
+		slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i);
+		if (IS_ERR(slot)) {
+			for (i--;i >= 0;i--)
+				sdhci_pci_remove_slot(chip->slots[i]);
+			ret = PTR_ERR(slot);
+			goto free;
+		}
+
+		chip->slots[i] = slot;
+	}
+
+	return 0;
+
+free:
+	pci_set_drvdata(pdev, NULL);
+	kfree(chip);
+
+err:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void __devexit sdhci_pci_remove(struct pci_dev *pdev)
+{
+	int i;
+	struct sdhci_pci_chip *chip;
+
+	chip = pci_get_drvdata(pdev);
+
+	if (chip) {
+		for (i = 0;i < chip->num_slots; i++)
+			sdhci_pci_remove_slot(chip->slots[i]);
+
+		pci_set_drvdata(pdev, NULL);
+		kfree(chip);
+	}
+
+	pci_disable_device(pdev);
+}
+
+static struct pci_driver sdhci_driver = {
+	.name = 	"sdhci-pci",
+	.id_table =	pci_ids,
+	.probe = 	sdhci_pci_probe,
+	.remove =	__devexit_p(sdhci_pci_remove),
+	.suspend =	sdhci_pci_suspend,
+	.resume	=	sdhci_pci_resume,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+	return pci_register_driver(&sdhci_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+	pci_unregister_driver(&sdhci_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b413aa6c246..17701c3da73 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -15,7 +15,7 @@
 
 #include <linux/delay.h>
 #include <linux/highmem.h>
-#include <linux/pci.h>
+#include <linux/io.h>
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 
@@ -32,135 +32,6 @@
 
 static unsigned int debug_quirks = 0;
 
-/*
- * Different quirks to handle when the hardware deviates from a strict
- * interpretation of the SDHCI specification.
- */
-
-/* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
-/* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
-/* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
-/* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
-/* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
-/* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
-/* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<6)
-/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<7)
-/* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<8)
-/* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<9)
-/* Controller has an off-by-one issue with timeout value */
-#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL		(1<<10)
-
-static const struct pci_device_id pci_ids[] __devinitdata = {
-	{
-		.vendor		= PCI_VENDOR_ID_RICOH,
-		.device		= PCI_DEVICE_ID_RICOH_R5C822,
-		.subvendor	= PCI_VENDOR_ID_IBM,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_CLOCK_BEFORE_RESET |
-				  SDHCI_QUIRK_FORCE_DMA,
-	},
-
-	{
-		.vendor		= PCI_VENDOR_ID_RICOH,
-		.device		= PCI_DEVICE_ID_RICOH_R5C822,
-		.subvendor	= PCI_VENDOR_ID_SAMSUNG,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_FORCE_DMA |
-				  SDHCI_QUIRK_NO_CARD_NO_RESET,
-	},
-
-	{
-		.vendor		= PCI_VENDOR_ID_RICOH,
-		.device		= PCI_DEVICE_ID_RICOH_R5C822,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_FORCE_DMA,
-	},
-
-	{
-		.vendor		= PCI_VENDOR_ID_TI,
-		.device		= PCI_DEVICE_ID_TI_XX21_XX11_SD,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_FORCE_DMA,
-	},
-
-	{
-		.vendor		= PCI_VENDOR_ID_ENE,
-		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE |
-				  SDHCI_QUIRK_BROKEN_DMA,
-	},
-
-	{
-		.vendor		= PCI_VENDOR_ID_ENE,
-		.device		= PCI_DEVICE_ID_ENE_CB712_SD_2,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE |
-				  SDHCI_QUIRK_BROKEN_DMA,
-	},
-
-	{
-		.vendor         = PCI_VENDOR_ID_ENE,
-		.device         = PCI_DEVICE_ID_ENE_CB714_SD,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.driver_data    = SDHCI_QUIRK_SINGLE_POWER_WRITE |
-				  SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
-				  SDHCI_QUIRK_BROKEN_DMA,
-	},
-
-	{
-		.vendor         = PCI_VENDOR_ID_ENE,
-		.device         = PCI_DEVICE_ID_ENE_CB714_SD_2,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.driver_data    = SDHCI_QUIRK_SINGLE_POWER_WRITE |
-				  SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
-				  SDHCI_QUIRK_BROKEN_DMA,
-	},
-
-	{
-		.vendor         = PCI_VENDOR_ID_MARVELL,
-		.device         = PCI_DEVICE_ID_MARVELL_CAFE_SD,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.driver_data    = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
-				  SDHCI_QUIRK_INCR_TIMEOUT_CONTROL,
-	},
-
-	{
-		.vendor         = PCI_VENDOR_ID_JMICRON,
-		.device         = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.driver_data    = SDHCI_QUIRK_32BIT_DMA_ADDR |
-				  SDHCI_QUIRK_32BIT_DMA_SIZE |
-				  SDHCI_QUIRK_RESET_AFTER_REQUEST,
-	},
-
-	{	/* Generic SD host controller */
-		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
-	},
-
-	{ /* end: all zeroes */ },
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
 static void sdhci_finish_data(struct sdhci_host *);
 
@@ -215,7 +86,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	unsigned long timeout;
 
-	if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
 		if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
 			SDHCI_CARD_PRESENT))
 			return;
@@ -253,7 +124,8 @@ static void sdhci_init(struct sdhci_host *host)
 		SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
 		SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
 		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
-		SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
+		SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
+		SDHCI_INT_ADMA_ERROR;
 
 	writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
 	writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
@@ -443,23 +315,226 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 	DBG("PIO transfer complete.\n");
 }
 
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
 {
-	u8 count;
-	unsigned target_timeout, current_timeout;
+	local_irq_save(*flags);
+	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
 
-	WARN_ON(host->data);
+static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
+{
+	kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+	local_irq_restore(*flags);
+}
 
-	if (data == NULL)
-		return;
+static int sdhci_adma_table_pre(struct sdhci_host *host,
+	struct mmc_data *data)
+{
+	int direction;
 
-	/* Sanity checks */
-	BUG_ON(data->blksz * data->blocks > 524288);
-	BUG_ON(data->blksz > host->mmc->max_blk_size);
-	BUG_ON(data->blocks > 65535);
+	u8 *desc;
+	u8 *align;
+	dma_addr_t addr;
+	dma_addr_t align_addr;
+	int len, offset;
 
-	host->data = data;
-	host->data_early = 0;
+	struct scatterlist *sg;
+	int i;
+	char *buffer;
+	unsigned long flags;
+
+	/*
+	 * The spec does not specify endianness of descriptor table.
+	 * We currently guess that it is LE.
+	 */
+
+	if (data->flags & MMC_DATA_READ)
+		direction = DMA_FROM_DEVICE;
+	else
+		direction = DMA_TO_DEVICE;
+
+	/*
+	 * The ADMA descriptor table is mapped further down as we
+	 * need to fill it with data first.
+	 */
+
+	host->align_addr = dma_map_single(mmc_dev(host->mmc),
+		host->align_buffer, 128 * 4, direction);
+	if (dma_mapping_error(host->align_addr))
+		goto fail;
+	BUG_ON(host->align_addr & 0x3);
+
+	host->sg_count = dma_map_sg(mmc_dev(host->mmc),
+		data->sg, data->sg_len, direction);
+	if (host->sg_count == 0)
+		goto unmap_align;
+
+	desc = host->adma_desc;
+	align = host->align_buffer;
+
+	align_addr = host->align_addr;
+
+	for_each_sg(data->sg, sg, host->sg_count, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+
+		/*
+		 * The SDHCI specification states that ADMA
+		 * addresses must be 32-bit aligned. If they
+		 * aren't, then we use a bounce buffer for
+		 * the (up to three) bytes that screw up the
+		 * alignment.
+		 */
+		offset = (4 - (addr & 0x3)) & 0x3;
+		if (offset) {
+			if (data->flags & MMC_DATA_WRITE) {
+				buffer = sdhci_kmap_atomic(sg, &flags);
+				memcpy(align, buffer, offset);
+				sdhci_kunmap_atomic(buffer, &flags);
+			}
+
+			desc[7] = (align_addr >> 24) & 0xff;
+			desc[6] = (align_addr >> 16) & 0xff;
+			desc[5] = (align_addr >> 8) & 0xff;
+			desc[4] = (align_addr >> 0) & 0xff;
+
+			BUG_ON(offset > 65536);
+
+			desc[3] = (offset >> 8) & 0xff;
+			desc[2] = (offset >> 0) & 0xff;
+
+			desc[1] = 0x00;
+			desc[0] = 0x21; /* tran, valid */
+
+			align += 4;
+			align_addr += 4;
+
+			desc += 8;
+
+			addr += offset;
+			len -= offset;
+		}
+
+		desc[7] = (addr >> 24) & 0xff;
+		desc[6] = (addr >> 16) & 0xff;
+		desc[5] = (addr >> 8) & 0xff;
+		desc[4] = (addr >> 0) & 0xff;
+
+		BUG_ON(len > 65536);
+
+		desc[3] = (len >> 8) & 0xff;
+		desc[2] = (len >> 0) & 0xff;
+
+		desc[1] = 0x00;
+		desc[0] = 0x21; /* tran, valid */
+
+		desc += 8;
+
+		/*
+		 * If this triggers then we have a calculation bug
+		 * somewhere. :/
+		 */
+		WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
+	}
+
+	/*
+	 * Add a terminating entry.
+	 */
+	desc[7] = 0;
+	desc[6] = 0;
+	desc[5] = 0;
+	desc[4] = 0;
+
+	desc[3] = 0;
+	desc[2] = 0;
+
+	desc[1] = 0x00;
+	desc[0] = 0x03; /* nop, end, valid */
+
+	/*
+	 * Resync align buffer as we might have changed it.
+	 */
+	if (data->flags & MMC_DATA_WRITE) {
+		dma_sync_single_for_device(mmc_dev(host->mmc),
+			host->align_addr, 128 * 4, direction);
+	}
+
+	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
+		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+	if (dma_mapping_error(host->align_addr))
+		goto unmap_entries;
+	BUG_ON(host->adma_addr & 0x3);
+
+	return 0;
+
+unmap_entries:
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+		data->sg_len, direction);
+unmap_align:
+	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+		128 * 4, direction);
+fail:
+	return -EINVAL;
+}
+
+static void sdhci_adma_table_post(struct sdhci_host *host,
+	struct mmc_data *data)
+{
+	int direction;
+
+	struct scatterlist *sg;
+	int i, size;
+	u8 *align;
+	char *buffer;
+	unsigned long flags;
+
+	if (data->flags & MMC_DATA_READ)
+		direction = DMA_FROM_DEVICE;
+	else
+		direction = DMA_TO_DEVICE;
+
+	dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
+		(128 * 2 + 1) * 4, DMA_TO_DEVICE);
+
+	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+		128 * 4, direction);
+
+	if (data->flags & MMC_DATA_READ) {
+		dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
+			data->sg_len, direction);
+
+		align = host->align_buffer;
+
+		for_each_sg(data->sg, sg, host->sg_count, i) {
+			if (sg_dma_address(sg) & 0x3) {
+				size = 4 - (sg_dma_address(sg) & 0x3);
+
+				buffer = sdhci_kmap_atomic(sg, &flags);
+				memcpy(buffer, align, size);
+				sdhci_kunmap_atomic(buffer, &flags);
+
+				align += 4;
+			}
+		}
+	}
+
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+		data->sg_len, direction);
+}
+
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
+{
+	u8 count;
+	unsigned target_timeout, current_timeout;
+
+	/*
+	 * If the host controller provides us with an incorrect timeout
+	 * value, just skip the check and use 0xE.  The hardware may take
+	 * longer to time out, but that's much better than having a too-short
+	 * timeout value.
+	 */
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
+		return 0xE;
 
 	/* timeout in us */
 	target_timeout = data->timeout_ns / 1000 +
@@ -484,52 +559,158 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 			break;
 	}
 
-	/*
-	 * Compensate for an off-by-one error in the CaFe hardware; otherwise,
-	 * a too-small count gives us interrupt timeouts.
-	 */
-	if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL))
-		count++;
-
 	if (count >= 0xF) {
 		printk(KERN_WARNING "%s: Too large timeout requested!\n",
 			mmc_hostname(host->mmc));
 		count = 0xE;
 	}
 
+	return count;
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+{
+	u8 count;
+	u8 ctrl;
+	int ret;
+
+	WARN_ON(host->data);
+
+	if (data == NULL)
+		return;
+
+	/* Sanity checks */
+	BUG_ON(data->blksz * data->blocks > 524288);
+	BUG_ON(data->blksz > host->mmc->max_blk_size);
+	BUG_ON(data->blocks > 65535);
+
+	host->data = data;
+	host->data_early = 0;
+
+	count = sdhci_calc_timeout(host, data);
 	writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
 
 	if (host->flags & SDHCI_USE_DMA)
 		host->flags |= SDHCI_REQ_USE_DMA;
 
-	if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
-		(host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) &&
-		((data->blksz * data->blocks) & 0x3))) {
-		DBG("Reverting to PIO because of transfer size (%d)\n",
-			data->blksz * data->blocks);
-		host->flags &= ~SDHCI_REQ_USE_DMA;
+	/*
+	 * FIXME: This doesn't account for merging when mapping the
+	 * scatterlist.
+	 */
+	if (host->flags & SDHCI_REQ_USE_DMA) {
+		int broken, i;
+		struct scatterlist *sg;
+
+		broken = 0;
+		if (host->flags & SDHCI_USE_ADMA) {
+			if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+				broken = 1;
+		} else {
+			if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+				broken = 1;
+		}
+
+		if (unlikely(broken)) {
+			for_each_sg(data->sg, sg, data->sg_len, i) {
+				if (sg->length & 0x3) {
+					DBG("Reverting to PIO because of "
+						"transfer size (%d)\n",
+						sg->length);
+					host->flags &= ~SDHCI_REQ_USE_DMA;
+					break;
+				}
+			}
+		}
 	}
 
 	/*
 	 * The assumption here being that alignment is the same after
 	 * translation to device address space.
 	 */
-	if (unlikely((host->flags & SDHCI_REQ_USE_DMA) &&
-		(host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
-		(data->sg->offset & 0x3))) {
-		DBG("Reverting to PIO because of bad alignment\n");
-		host->flags &= ~SDHCI_REQ_USE_DMA;
+	if (host->flags & SDHCI_REQ_USE_DMA) {
+		int broken, i;
+		struct scatterlist *sg;
+
+		broken = 0;
+		if (host->flags & SDHCI_USE_ADMA) {
+			/*
+			 * As we use 3 byte chunks to work around
+			 * alignment problems, we need to check this
+			 * quirk.
+			 */
+			if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+				broken = 1;
+		} else {
+			if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
+				broken = 1;
+		}
+
+		if (unlikely(broken)) {
+			for_each_sg(data->sg, sg, data->sg_len, i) {
+				if (sg->offset & 0x3) {
+					DBG("Reverting to PIO because of "
+						"bad alignment\n");
+					host->flags &= ~SDHCI_REQ_USE_DMA;
+					break;
+				}
+			}
+		}
 	}
 
 	if (host->flags & SDHCI_REQ_USE_DMA) {
-		int count;
+		if (host->flags & SDHCI_USE_ADMA) {
+			ret = sdhci_adma_table_pre(host, data);
+			if (ret) {
+				/*
+				 * This only happens when someone fed
+				 * us an invalid request.
+				 */
+				WARN_ON(1);
+				host->flags &= ~SDHCI_USE_DMA;
+			} else {
+				writel(host->adma_addr,
+					host->ioaddr + SDHCI_ADMA_ADDRESS);
+			}
+		} else {
+			int sg_cnt;
+
+			sg_cnt = dma_map_sg(mmc_dev(host->mmc),
+					data->sg, data->sg_len,
+					(data->flags & MMC_DATA_READ) ?
+						DMA_FROM_DEVICE :
+						DMA_TO_DEVICE);
+			if (sg_cnt == 0) {
+				/*
+				 * This only happens when someone fed
+				 * us an invalid request.
+				 */
+				WARN_ON(1);
+				host->flags &= ~SDHCI_USE_DMA;
+			} else {
+				WARN_ON(count != 1);
+				writel(sg_dma_address(data->sg),
+					host->ioaddr + SDHCI_DMA_ADDRESS);
+			}
+		}
+	}
 
-		count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len,
-			(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
-		BUG_ON(count != 1);
+	/*
+	 * Always adjust the DMA selection as some controllers
+	 * (e.g. JMicron) can't do PIO properly when the selection
+	 * is ADMA.
+	 */
+	if (host->version >= SDHCI_SPEC_200) {
+		ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+		ctrl &= ~SDHCI_CTRL_DMA_MASK;
+		if ((host->flags & SDHCI_REQ_USE_DMA) &&
+			(host->flags & SDHCI_USE_ADMA))
+			ctrl |= SDHCI_CTRL_ADMA32;
+		else
+			ctrl |= SDHCI_CTRL_SDMA;
+		writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+	}
 
-		writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS);
-	} else {
+	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
 		host->cur_sg = data->sg;
 		host->num_sg = data->sg_len;
 
@@ -567,7 +748,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 static void sdhci_finish_data(struct sdhci_host *host)
 {
 	struct mmc_data *data;
-	u16 blocks;
 
 	BUG_ON(!host->data);
 
@@ -575,25 +755,26 @@ static void sdhci_finish_data(struct sdhci_host *host)
 	host->data = NULL;
 
 	if (host->flags & SDHCI_REQ_USE_DMA) {
-		pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
-			(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
+		if (host->flags & SDHCI_USE_ADMA)
+			sdhci_adma_table_post(host, data);
+		else {
+			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+				data->sg_len, (data->flags & MMC_DATA_READ) ?
+					DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		}
 	}
 
 	/*
-	 * Controller doesn't count down when in single block mode.
+	 * The specification states that the block count register must
+	 * be updated, but it does not specify at what point in the
+	 * data flow. That makes the register entirely useless to read
+	 * back so we have to assume that nothing made it to the card
+	 * in the event of an error.
 	 */
-	if (data->blocks == 1)
-		blocks = (data->error == 0) ? 0 : 1;
+	if (data->error)
+		data->bytes_xfered = 0;
 	else
-		blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
-	data->bytes_xfered = data->blksz * (data->blocks - blocks);
-
-	if (!data->error && blocks) {
-		printk(KERN_ERR "%s: Controller signalled completion even "
-			"though there were blocks left.\n",
-			mmc_hostname(host->mmc));
-		data->error = -EIO;
-	}
+		data->bytes_xfered = data->blksz * data->blocks;
 
 	if (data->stop) {
 		/*
@@ -775,7 +956,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	 * Spec says that we should clear the power reg before setting
 	 * a new value. Some controllers don't seem to like this though.
 	 */
-	if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
 
 	pwr = SDHCI_POWER_ON;
@@ -797,10 +978,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	}
 
 	/*
-	 * At least the CaFe chip gets confused if we set the voltage
+	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
-	if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
 		writeb(pwr & ~SDHCI_POWER_ON,
 				host->ioaddr + SDHCI_POWER_CONTROL);
 
@@ -833,7 +1014,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	host->mrq = mrq;
 
-	if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+	if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
+		|| (host->flags & SDHCI_DEVICE_DEAD)) {
 		host->mrq->cmd->error = -ENOMEDIUM;
 		tasklet_schedule(&host->finish_tasklet);
 	} else
@@ -853,6 +1035,9 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_lock_irqsave(&host->lock, flags);
 
+	if (host->flags & SDHCI_DEVICE_DEAD)
+		goto out;
+
 	/*
 	 * Reset the chip on each power off.
 	 * Should clear out any weird states.
@@ -888,9 +1073,10 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	 * signalling timeout and CRC errors even on CMD0. Resetting
 	 * it on each ios seems to solve the problem.
 	 */
-	if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+	if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
 		sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
+out:
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
 }
@@ -905,7 +1091,10 @@ static int sdhci_get_ro(struct mmc_host *mmc)
 
 	spin_lock_irqsave(&host->lock, flags);
 
-	present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
+	if (host->flags & SDHCI_DEVICE_DEAD)
+		present = 0;
+	else
+		present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
@@ -922,6 +1111,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 	spin_lock_irqsave(&host->lock, flags);
 
+	if (host->flags & SDHCI_DEVICE_DEAD)
+		goto out;
+
 	ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
 
 	ier &= ~SDHCI_INT_CARD_INT;
@@ -931,6 +1123,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
 	writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
 
+out:
 	mmiowb();
 
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -996,13 +1189,14 @@ static void sdhci_tasklet_finish(unsigned long param)
 	 * The controller needs a reset of internal state machines
 	 * upon error conditions.
 	 */
-	if (mrq->cmd->error ||
-		(mrq->data && (mrq->data->error ||
-		(mrq->data->stop && mrq->data->stop->error))) ||
-		(host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) {
+	if (!(host->flags & SDHCI_DEVICE_DEAD) &&
+		(mrq->cmd->error ||
+		 (mrq->data && (mrq->data->error ||
+		  (mrq->data->stop && mrq->data->stop->error))) ||
+		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
 
 		/* Some controllers need this kick or reset won't work here */
-		if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
+		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
 			unsigned int clock;
 
 			/* This is to force an update */
@@ -1116,6 +1310,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		host->data->error = -ETIMEDOUT;
 	else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
 		host->data->error = -EILSEQ;
+	else if (intmask & SDHCI_INT_ADMA_ERROR)
+		host->data->error = -EIO;
 
 	if (host->data->error)
 		sdhci_finish_data(host);
@@ -1234,218 +1430,167 @@ out:
 
 #ifdef CONFIG_PM
 
-static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state)
+int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
 {
-	struct sdhci_chip *chip;
-	int i, ret;
-
-	chip = pci_get_drvdata(pdev);
-	if (!chip)
-		return 0;
-
-	DBG("Suspending...\n");
-
-	for (i = 0;i < chip->num_slots;i++) {
-		if (!chip->hosts[i])
-			continue;
-		ret = mmc_suspend_host(chip->hosts[i]->mmc, state);
-		if (ret) {
-			for (i--;i >= 0;i--)
-				mmc_resume_host(chip->hosts[i]->mmc);
-			return ret;
-		}
-	}
-
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	int ret;
 
-	for (i = 0;i < chip->num_slots;i++) {
-		if (!chip->hosts[i])
-			continue;
-		free_irq(chip->hosts[i]->irq, chip->hosts[i]);
-	}
+	ret = mmc_suspend_host(host->mmc, state);
+	if (ret)
+		return ret;
 
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	free_irq(host->irq, host);
 
 	return 0;
 }
 
-static int sdhci_resume (struct pci_dev *pdev)
-{
-	struct sdhci_chip *chip;
-	int i, ret;
+EXPORT_SYMBOL_GPL(sdhci_suspend_host);
 
-	chip = pci_get_drvdata(pdev);
-	if (!chip)
-		return 0;
+int sdhci_resume_host(struct sdhci_host *host)
+{
+	int ret;
 
-	DBG("Resuming...\n");
+	if (host->flags & SDHCI_USE_DMA) {
+		if (host->ops->enable_dma)
+			host->ops->enable_dma(host);
+	}
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	ret = pci_enable_device(pdev);
+	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
+			  mmc_hostname(host->mmc), host);
 	if (ret)
 		return ret;
 
-	for (i = 0;i < chip->num_slots;i++) {
-		if (!chip->hosts[i])
-			continue;
-		if (chip->hosts[i]->flags & SDHCI_USE_DMA)
-			pci_set_master(pdev);
-		ret = request_irq(chip->hosts[i]->irq, sdhci_irq,
-			IRQF_SHARED, mmc_hostname(chip->hosts[i]->mmc),
-			chip->hosts[i]);
-		if (ret)
-			return ret;
-		sdhci_init(chip->hosts[i]);
-		mmiowb();
-		ret = mmc_resume_host(chip->hosts[i]->mmc);
-		if (ret)
-			return ret;
-	}
+	sdhci_init(host);
+	mmiowb();
+
+	ret = mmc_resume_host(host->mmc);
+	if (ret)
+		return ret;
 
 	return 0;
 }
 
-#else /* CONFIG_PM */
-
-#define sdhci_suspend NULL
-#define sdhci_resume NULL
+EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
  *                                                                           *
- * Device probing/removal                                                    *
+ * Device allocation/registration                                            *
  *                                                                           *
 \*****************************************************************************/
 
-static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
+struct sdhci_host *sdhci_alloc_host(struct device *dev,
+	size_t priv_size)
 {
-	int ret;
-	unsigned int version;
-	struct sdhci_chip *chip;
 	struct mmc_host *mmc;
 	struct sdhci_host *host;
 
-	u8 first_bar;
-	unsigned int caps;
-
-	chip = pci_get_drvdata(pdev);
-	BUG_ON(!chip);
-
-	ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
-	if (ret)
-		return ret;
-
-	first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
-
-	if (first_bar > 5) {
-		printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n");
-		return -ENODEV;
-	}
-
-	if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) {
-		printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n");
-		return -ENODEV;
-	}
-
-	if (pci_resource_len(pdev, first_bar + slot) != 0x100) {
-		printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. "
-			"You may experience problems.\n");
-	}
-
-	if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
-		printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
-		return -ENODEV;
-	}
-
-	if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
-		printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
-		return -ENODEV;
-	}
+	WARN_ON(dev == NULL);
 
-	mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
+	mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
 	if (!mmc)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 
-	host->chip = chip;
-	chip->hosts[slot] = host;
+	return host;
+}
 
-	host->bar = first_bar + slot;
+EXPORT_SYMBOL_GPL(sdhci_alloc_host);
 
-	host->addr = pci_resource_start(pdev, host->bar);
-	host->irq = pdev->irq;
+int sdhci_add_host(struct sdhci_host *host)
+{
+	struct mmc_host *mmc;
+	unsigned int caps;
+	int ret;
 
-	DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq);
+	WARN_ON(host == NULL);
+	if (host == NULL)
+		return -EINVAL;
 
-	ret = pci_request_region(pdev, host->bar, mmc_hostname(mmc));
-	if (ret)
-		goto free;
+	mmc = host->mmc;
 
-	host->ioaddr = ioremap_nocache(host->addr,
-		pci_resource_len(pdev, host->bar));
-	if (!host->ioaddr) {
-		ret = -ENOMEM;
-		goto release;
-	}
+	if (debug_quirks)
+		host->quirks = debug_quirks;
 
 	sdhci_reset(host, SDHCI_RESET_ALL);
 
-	version = readw(host->ioaddr + SDHCI_HOST_VERSION);
-	version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
-	if (version > 1) {
+	host->version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+	host->version = (host->version & SDHCI_SPEC_VER_MASK)
+				>> SDHCI_SPEC_VER_SHIFT;
+	if (host->version > SDHCI_SPEC_200) {
 		printk(KERN_ERR "%s: Unknown controller version (%d). "
 			"You may experience problems.\n", mmc_hostname(mmc),
-			version);
+			host->version);
 	}
 
 	caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
 
-	if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
+	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_DMA;
 	else if (!(caps & SDHCI_CAN_DO_DMA))
 		DBG("Controller doesn't have DMA capability\n");
 	else
 		host->flags |= SDHCI_USE_DMA;
 
-	if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
 		(host->flags & SDHCI_USE_DMA)) {
 		DBG("Disabling DMA as it is marked broken\n");
 		host->flags &= ~SDHCI_USE_DMA;
 	}
 
-	if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
-		(host->flags & SDHCI_USE_DMA)) {
-		printk(KERN_WARNING "%s: Will use DMA "
-			"mode even though HW doesn't fully "
-			"claim to support it.\n", mmc_hostname(mmc));
+	if (host->flags & SDHCI_USE_DMA) {
+		if ((host->version >= SDHCI_SPEC_200) &&
+				(caps & SDHCI_CAN_DO_ADMA2))
+			host->flags |= SDHCI_USE_ADMA;
+	}
+
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
+		(host->flags & SDHCI_USE_ADMA)) {
+		DBG("Disabling ADMA as it is marked broken\n");
+		host->flags &= ~SDHCI_USE_ADMA;
 	}
 
 	if (host->flags & SDHCI_USE_DMA) {
-		if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
-			printk(KERN_WARNING "%s: No suitable DMA available. "
-				"Falling back to PIO.\n", mmc_hostname(mmc));
-			host->flags &= ~SDHCI_USE_DMA;
+		if (host->ops->enable_dma) {
+			if (host->ops->enable_dma(host)) {
+				printk(KERN_WARNING "%s: No suitable DMA "
+					"available. Falling back to PIO.\n",
+					mmc_hostname(mmc));
+				host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
+			}
 		}
 	}
 
-	if (host->flags & SDHCI_USE_DMA)
-		pci_set_master(pdev);
-	else /* XXX: Hack to get MMC layer to avoid highmem */
-		pdev->dma_mask = 0;
+	if (host->flags & SDHCI_USE_ADMA) {
+		/*
+		 * We need to allocate descriptors for all sg entries
+		 * (128) and potentially one alignment transfer for
+		 * each of those entries.
+		 */
+		host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+		host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
+		if (!host->adma_desc || !host->align_buffer) {
+			kfree(host->adma_desc);
+			kfree(host->align_buffer);
+			printk(KERN_WARNING "%s: Unable to allocate ADMA "
+				"buffers. Falling back to standard DMA.\n",
+				mmc_hostname(mmc));
+			host->flags &= ~SDHCI_USE_ADMA;
+		}
+	}
+
+	/* XXX: Hack to get MMC layer to avoid highmem */
+	if (!(host->flags & SDHCI_USE_DMA))
+		mmc_dev(host->mmc)->dma_mask = NULL;
 
 	host->max_clk =
 		(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
 	if (host->max_clk == 0) {
 		printk(KERN_ERR "%s: Hardware doesn't specify base clock "
 			"frequency.\n", mmc_hostname(mmc));
-		ret = -ENODEV;
-		goto unmap;
+		return -ENODEV;
 	}
 	host->max_clk *= 1000000;
 
@@ -1454,8 +1599,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	if (host->timeout_clk == 0) {
 		printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
 			"frequency.\n", mmc_hostname(mmc));
-		ret = -ENODEV;
-		goto unmap;
+		return -ENODEV;
 	}
 	if (caps & SDHCI_TIMEOUT_CLK_UNIT)
 		host->timeout_clk *= 1000;
@@ -1466,7 +1610,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	mmc->ops = &sdhci_ops;
 	mmc->f_min = host->max_clk / 256;
 	mmc->f_max = host->max_clk;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
@@ -1482,20 +1626,22 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	if (mmc->ocr_avail == 0) {
 		printk(KERN_ERR "%s: Hardware doesn't report any "
 			"support voltages.\n", mmc_hostname(mmc));
-		ret = -ENODEV;
-		goto unmap;
+		return -ENODEV;
 	}
 
 	spin_lock_init(&host->lock);
 
 	/*
-	 * Maximum number of segments. Hardware cannot do scatter lists.
+	 * Maximum number of segments. Depends on if the hardware
+	 * can do scatter/gather or not.
 	 */
-	if (host->flags & SDHCI_USE_DMA)
+	if (host->flags & SDHCI_USE_ADMA)
+		mmc->max_hw_segs = 128;
+	else if (host->flags & SDHCI_USE_DMA)
 		mmc->max_hw_segs = 1;
-	else
-		mmc->max_hw_segs = 16;
-	mmc->max_phys_segs = 16;
+	else /* PIO */
+		mmc->max_hw_segs = 128;
+	mmc->max_phys_segs = 128;
 
 	/*
 	 * Maximum number of sectors in one transfer. Limited by DMA boundary
@@ -1505,9 +1651,13 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 
 	/*
 	 * Maximum segment size. Could be one segment with the maximum number
-	 * of bytes.
+	 * of bytes. When doing hardware scatter/gather, each entry cannot
+	 * be larger than 64 KiB though.
 	 */
-	mmc->max_seg_size = mmc->max_req_size;
+	if (host->flags & SDHCI_USE_ADMA)
+		mmc->max_seg_size = 65536;
+	else
+		mmc->max_seg_size = mmc->max_req_size;
 
 	/*
 	 * Maximum block size. This varies from controller to controller and
@@ -1553,7 +1703,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	host->led.default_trigger = mmc_hostname(mmc);
 	host->led.brightness_set = sdhci_led_control;
 
-	ret = led_classdev_register(&pdev->dev, &host->led);
+	ret = led_classdev_register(mmc_dev(mmc), &host->led);
 	if (ret)
 		goto reset;
 #endif
@@ -1562,8 +1712,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 
 	mmc_add_host(mmc);
 
-	printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n",
-		mmc_hostname(mmc), host->addr, host->irq,
+	printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
+		mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
+		(host->flags & SDHCI_USE_ADMA)?"A":"",
 		(host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
 
 	return 0;
@@ -1576,35 +1727,40 @@ reset:
 untasklet:
 	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
-unmap:
-	iounmap(host->ioaddr);
-release:
-	pci_release_region(pdev, host->bar);
-free:
-	mmc_free_host(mmc);
 
 	return ret;
 }
 
-static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
+EXPORT_SYMBOL_GPL(sdhci_add_host);
+
+void sdhci_remove_host(struct sdhci_host *host, int dead)
 {
-	struct sdhci_chip *chip;
-	struct mmc_host *mmc;
-	struct sdhci_host *host;
+	unsigned long flags;
 
-	chip = pci_get_drvdata(pdev);
-	host = chip->hosts[slot];
-	mmc = host->mmc;
+	if (dead) {
+		spin_lock_irqsave(&host->lock, flags);
+
+		host->flags |= SDHCI_DEVICE_DEAD;
+
+		if (host->mrq) {
+			printk(KERN_ERR "%s: Controller removed during "
+				" transfer!\n", mmc_hostname(host->mmc));
 
-	chip->hosts[slot] = NULL;
+			host->mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
 
-	mmc_remove_host(mmc);
+	mmc_remove_host(host->mmc);
 
 #ifdef CONFIG_LEDS_CLASS
 	led_classdev_unregister(&host->led);
 #endif
 
-	sdhci_reset(host, SDHCI_RESET_ALL);
+	if (!dead)
+		sdhci_reset(host, SDHCI_RESET_ALL);
 
 	free_irq(host->irq, host);
 
@@ -1613,106 +1769,21 @@ static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
 	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
 
-	iounmap(host->ioaddr);
-
-	pci_release_region(pdev, host->bar);
+	kfree(host->adma_desc);
+	kfree(host->align_buffer);
 
-	mmc_free_host(mmc);
+	host->adma_desc = NULL;
+	host->align_buffer = NULL;
 }
 
-static int __devinit sdhci_probe(struct pci_dev *pdev,
-	const struct pci_device_id *ent)
-{
-	int ret, i;
-	u8 slots, rev;
-	struct sdhci_chip *chip;
-
-	BUG_ON(pdev == NULL);
-	BUG_ON(ent == NULL);
+EXPORT_SYMBOL_GPL(sdhci_remove_host);
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
-
-	printk(KERN_INFO DRIVER_NAME
-		": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
-		pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
-		(int)rev);
-
-	ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
-	if (ret)
-		return ret;
-
-	slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
-	DBG("found %d slot(s)\n", slots);
-	if (slots == 0)
-		return -ENODEV;
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-
-	chip = kzalloc(sizeof(struct sdhci_chip) +
-		sizeof(struct sdhci_host*) * slots, GFP_KERNEL);
-	if (!chip) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	chip->pdev = pdev;
-	chip->quirks = ent->driver_data;
-
-	if (debug_quirks)
-		chip->quirks = debug_quirks;
-
-	chip->num_slots = slots;
-	pci_set_drvdata(pdev, chip);
-
-	for (i = 0;i < slots;i++) {
-		ret = sdhci_probe_slot(pdev, i);
-		if (ret) {
-			for (i--;i >= 0;i--)
-				sdhci_remove_slot(pdev, i);
-			goto free;
-		}
-	}
-
-	return 0;
-
-free:
-	pci_set_drvdata(pdev, NULL);
-	kfree(chip);
-
-err:
-	pci_disable_device(pdev);
-	return ret;
-}
-
-static void __devexit sdhci_remove(struct pci_dev *pdev)
+void sdhci_free_host(struct sdhci_host *host)
 {
-	int i;
-	struct sdhci_chip *chip;
-
-	chip = pci_get_drvdata(pdev);
-
-	if (chip) {
-		for (i = 0;i < chip->num_slots;i++)
-			sdhci_remove_slot(pdev, i);
-
-		pci_set_drvdata(pdev, NULL);
-
-		kfree(chip);
-	}
-
-	pci_disable_device(pdev);
+	mmc_free_host(host->mmc);
 }
 
-static struct pci_driver sdhci_driver = {
-	.name = 	DRIVER_NAME,
-	.id_table =	pci_ids,
-	.probe = 	sdhci_probe,
-	.remove =	__devexit_p(sdhci_remove),
-	.suspend =	sdhci_suspend,
-	.resume	=	sdhci_resume,
-};
+EXPORT_SYMBOL_GPL(sdhci_free_host);
 
 /*****************************************************************************\
  *                                                                           *
@@ -1726,14 +1797,11 @@ static int __init sdhci_drv_init(void)
 		": Secure Digital Host Controller Interface driver\n");
 	printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
 
-	return pci_register_driver(&sdhci_driver);
+	return 0;
 }
 
 static void __exit sdhci_drv_exit(void)
 {
-	DBG("Exiting\n");
-
-	pci_unregister_driver(&sdhci_driver);
 }
 
 module_init(sdhci_drv_init);
@@ -1742,7 +1810,7 @@ module_exit(sdhci_drv_exit);
 module_param(debug_quirks, uint, 0444);
 
 MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
-MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
 MODULE_LICENSE("GPL");
 
 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 299118de893..5bb35528176 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -10,18 +10,6 @@
  */
 
 /*
- * PCI registers
- */
-
-#define PCI_SDHCI_IFPIO			0x00
-#define PCI_SDHCI_IFDMA			0x01
-#define PCI_SDHCI_IFVENDOR		0x02
-
-#define PCI_SLOT_INFO			0x40	/* 8 bits */
-#define  PCI_SLOT_INFO_SLOTS(x)		((x >> 4) & 7)
-#define  PCI_SLOT_INFO_FIRST_BAR_MASK	0x07
-
-/*
  * Controller registers
  */
 
@@ -72,6 +60,11 @@
 #define  SDHCI_CTRL_LED		0x01
 #define  SDHCI_CTRL_4BITBUS	0x02
 #define  SDHCI_CTRL_HISPD	0x04
+#define  SDHCI_CTRL_DMA_MASK	0x18
+#define   SDHCI_CTRL_SDMA	0x00
+#define   SDHCI_CTRL_ADMA1	0x08
+#define   SDHCI_CTRL_ADMA32	0x10
+#define   SDHCI_CTRL_ADMA64	0x18
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -117,6 +110,7 @@
 #define  SDHCI_INT_DATA_END_BIT	0x00400000
 #define  SDHCI_INT_BUS_POWER	0x00800000
 #define  SDHCI_INT_ACMD12ERR	0x01000000
+#define  SDHCI_INT_ADMA_ERROR	0x02000000
 
 #define  SDHCI_INT_NORMAL_MASK	0x00007FFF
 #define  SDHCI_INT_ERROR_MASK	0xFFFF8000
@@ -140,11 +134,14 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_ADMA2	0x00080000
+#define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
 #define  SDHCI_CAN_DO_DMA	0x00400000
 #define  SDHCI_CAN_VDD_330	0x01000000
 #define  SDHCI_CAN_VDD_300	0x02000000
 #define  SDHCI_CAN_VDD_180	0x04000000
+#define  SDHCI_CAN_64BIT	0x10000000
 
 /* 44-47 reserved for more caps */
 
@@ -152,7 +149,16 @@
 
 /* 4C-4F reserved for more max current */
 
-/* 50-FB reserved */
+#define SDHCI_SET_ACMD12_ERROR	0x50
+#define SDHCI_SET_INT_ERROR	0x52
+
+#define SDHCI_ADMA_ERROR	0x54
+
+/* 55-57 reserved */
+
+#define SDHCI_ADMA_ADDRESS	0x58
+
+/* 60-FB reserved */
 
 #define SDHCI_SLOT_INT_STATUS	0xFC
 
@@ -161,11 +167,50 @@
 #define  SDHCI_VENDOR_VER_SHIFT	8
 #define  SDHCI_SPEC_VER_MASK	0x00FF
 #define  SDHCI_SPEC_VER_SHIFT	0
+#define   SDHCI_SPEC_100	0
+#define   SDHCI_SPEC_200	1
 
-struct sdhci_chip;
+struct sdhci_ops;
 
 struct sdhci_host {
-	struct sdhci_chip	*chip;
+	/* Data set by hardware interface driver */
+	const char		*hw_name;	/* Hardware bus name */
+
+	unsigned int		quirks;		/* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+
+	int			irq;		/* Device IRQ */
+	void __iomem *		ioaddr;		/* Mapped address */
+
+	const struct sdhci_ops	*ops;		/* Low level hw interface */
+
+	/* Internal data */
 	struct mmc_host		*mmc;		/* MMC structure */
 
 #ifdef CONFIG_LEDS_CLASS
@@ -176,7 +221,11 @@ struct sdhci_host {
 
 	int			flags;		/* Host attributes */
 #define SDHCI_USE_DMA		(1<<0)		/* Host is DMA capable */
-#define SDHCI_REQ_USE_DMA	(1<<1)		/* Use DMA for this req. */
+#define SDHCI_USE_ADMA		(1<<1)		/* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA	(1<<2)		/* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD	(1<<3)		/* Device unresponsive */
+
+	unsigned int		version;	/* SDHCI spec. version */
 
 	unsigned int		max_clk;	/* Max possible freq (MHz) */
 	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
@@ -194,22 +243,41 @@ struct sdhci_host {
 	int			offset;		/* Offset into current sg */
 	int			remain;		/* Bytes left in current */
 
-	int			irq;		/* Device IRQ */
-	int			bar;		/* PCI BAR index */
-	unsigned long		addr;		/* Bus address */
-	void __iomem *		ioaddr;		/* Mapped address */
+	int			sg_count;	/* Mapped sg entries */
+
+	u8			*adma_desc;	/* ADMA descriptor table */
+	u8			*align_buffer;	/* Bounce buffer */
+
+	dma_addr_t		adma_addr;	/* Mapped ADMA descr. table */
+	dma_addr_t		align_addr;	/* Mapped bounce buffer */
 
 	struct tasklet_struct	card_tasklet;	/* Tasklet structures */
 	struct tasklet_struct	finish_tasklet;
 
 	struct timer_list	timer;		/* Timer for timeouts */
-};
 
-struct sdhci_chip {
-	struct pci_dev		*pdev;
+	unsigned long		private[0] ____cacheline_aligned;
+};
 
-	unsigned long		quirks;
 
-	int			num_slots;	/* Slots on controller */
-	struct sdhci_host	*hosts[0];	/* Pointers to hosts */
+struct sdhci_ops {
+	int		(*enable_dma)(struct sdhci_host *host);
 };
+
+
+extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
+	size_t priv_size);
+extern void sdhci_free_host(struct sdhci_host *host);
+
+static inline void *sdhci_priv(struct sdhci_host *host)
+{
+	return (void *)host->private;
+}
+
+extern int sdhci_add_host(struct sdhci_host *host);
+extern void sdhci_remove_host(struct sdhci_host *host, int dead);
+
+#ifdef CONFIG_PM
+extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
+extern int sdhci_resume_host(struct sdhci_host *host);
+#endif
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
new file mode 100644
index 00000000000..f99e9f72162
--- /dev/null
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -0,0 +1,575 @@
+/*
+ *  sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be
+ *     found on some Ricoh RL5c476 II cardbus bridge
+ *
+ *  Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+#define DEBUG
+#define VERBOSE_DEBUG
+*/
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/scatterlist.h>
+#include <linux/version.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#define DRIVER_NAME "sdricoh_cs"
+
+static unsigned int switchlocked;
+
+/* i/o region */
+#define SDRICOH_PCI_REGION 0
+#define SDRICOH_PCI_REGION_SIZE 0x1000
+
+/* registers */
+#define R104_VERSION     0x104
+#define R200_CMD         0x200
+#define R204_CMD_ARG     0x204
+#define R208_DATAIO      0x208
+#define R20C_RESP        0x20c
+#define R21C_STATUS      0x21c
+#define R2E0_INIT        0x2e0
+#define R2E4_STATUS_RESP 0x2e4
+#define R2F0_RESET       0x2f0
+#define R224_MODE        0x224
+#define R226_BLOCKSIZE   0x226
+#define R228_POWER       0x228
+#define R230_DATA        0x230
+
+/* flags for the R21C_STATUS register */
+#define STATUS_CMD_FINISHED      0x00000001
+#define STATUS_TRANSFER_FINISHED 0x00000004
+#define STATUS_CARD_INSERTED     0x00000020
+#define STATUS_CARD_LOCKED       0x00000080
+#define STATUS_CMD_TIMEOUT       0x00400000
+#define STATUS_READY_TO_READ     0x01000000
+#define STATUS_READY_TO_WRITE    0x02000000
+#define STATUS_BUSY              0x40000000
+
+/* timeouts */
+#define INIT_TIMEOUT      100
+#define CMD_TIMEOUT       100000
+#define TRANSFER_TIMEOUT  100000
+#define BUSY_TIMEOUT      32767
+
+/* list of supported pcmcia devices */
+static struct pcmcia_device_id pcmcia_ids[] = {
+	/* vendor and device strings followed by their crc32 hashes */
+	PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed,
+				0xc3901202),
+	PCMCIA_DEVICE_NULL,
+};
+
+MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids);
+
+/* mmc privdata */
+struct sdricoh_host {
+	struct device *dev;
+	struct mmc_host *mmc;	/* MMC structure */
+	unsigned char __iomem *iobase;
+	struct pci_dev *pci_dev;
+	int app_cmd;
+};
+
+/***************** register i/o helper functions *****************************/
+
+static inline unsigned int sdricoh_readl(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readl(host->iobase + reg);
+	dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value);
+	return value;
+}
+
+static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg,
+				  unsigned int value)
+{
+	writel(value, host->iobase + reg);
+	dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value);
+
+}
+
+static inline unsigned int sdricoh_readw(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readw(host->iobase + reg);
+	dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+	return value;
+}
+
+static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg,
+					 unsigned short value)
+{
+	writew(value, host->iobase + reg);
+	dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value);
+}
+
+static inline unsigned int sdricoh_readb(struct sdricoh_host *host,
+					 unsigned int reg)
+{
+	unsigned int value = readb(host->iobase + reg);
+	dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value);
+	return value;
+}
+
+static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted,
+				unsigned int timeout){
+	unsigned int loop;
+	unsigned int status = 0;
+	struct device *dev = host->dev;
+	for (loop = 0; loop < timeout; loop++) {
+		status = sdricoh_readl(host, R21C_STATUS);
+		sdricoh_writel(host, R2E4_STATUS_RESP, status);
+		if (status & wanted)
+			break;
+	}
+
+	if (loop == timeout) {
+		dev_err(dev, "query_status: timeout waiting for %x\n", wanted);
+		return -ETIMEDOUT;
+	}
+
+	/* do not do this check in the loop as some commands fail otherwise */
+	if (status & 0x7F0000) {
+		dev_err(dev, "waiting for status bit %x failed\n", wanted);
+		return -EINVAL;
+	}
+	return 0;
+
+}
+
+static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode,
+			   unsigned int arg)
+{
+	unsigned int status;
+	int result = 0;
+	unsigned int loop = 0;
+	/* reset status reg? */
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+	/* fill parameters */
+	sdricoh_writel(host, R204_CMD_ARG, arg);
+	sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode);
+	/* wait for command completion */
+	if (opcode) {
+		for (loop = 0; loop < CMD_TIMEOUT; loop++) {
+			status = sdricoh_readl(host, R21C_STATUS);
+			sdricoh_writel(host, R2E4_STATUS_RESP, status);
+			if (status  & STATUS_CMD_FINISHED)
+				break;
+		}
+		/* don't check for timeout in the loop it is not always
+		   reset correctly
+		*/
+		if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT)
+			result = -ETIMEDOUT;
+
+	}
+
+	return result;
+
+}
+
+static int sdricoh_reset(struct sdricoh_host *host)
+{
+	dev_dbg(host->dev, "reset\n");
+	sdricoh_writel(host, R2F0_RESET, 0x10001);
+	sdricoh_writel(host, R2E0_INIT, 0x10000);
+	if (sdricoh_readl(host, R2E0_INIT) != 0x10000)
+		return -EIO;
+	sdricoh_writel(host, R2E0_INIT, 0x10007);
+
+	sdricoh_writel(host, R224_MODE, 0x2000000);
+	sdricoh_writel(host, R228_POWER, 0xe0);
+
+
+	/* status register ? */
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+
+	return 0;
+}
+
+static int sdricoh_blockio(struct sdricoh_host *host, int read,
+				u8 *buf, int len)
+{
+	int size;
+	u32 data = 0;
+	/* wait until the data is available */
+	if (read) {
+		if (sdricoh_query_status(host, STATUS_READY_TO_READ,
+						TRANSFER_TIMEOUT))
+			return -ETIMEDOUT;
+		sdricoh_writel(host, R21C_STATUS, 0x18);
+		/* read data */
+		while (len) {
+			data = sdricoh_readl(host, R230_DATA);
+			size = min(len, 4);
+			len -= size;
+			while (size) {
+				*buf = data & 0xFF;
+				buf++;
+				data >>= 8;
+				size--;
+			}
+		}
+	} else {
+		if (sdricoh_query_status(host, STATUS_READY_TO_WRITE,
+						TRANSFER_TIMEOUT))
+			return -ETIMEDOUT;
+		sdricoh_writel(host, R21C_STATUS, 0x18);
+		/* write data */
+		while (len) {
+			size = min(len, 4);
+			len -= size;
+			while (size) {
+				data >>= 8;
+				data |= (u32)*buf << 24;
+				buf++;
+				size--;
+			}
+			sdricoh_writel(host, R230_DATA, data);
+		}
+	}
+
+	if (len)
+		return -EIO;
+
+	return 0;
+}
+
+static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = cmd->data;
+	struct device *dev = host->dev;
+	unsigned char opcode = cmd->opcode;
+	int i;
+
+	dev_dbg(dev, "=============================\n");
+	dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode);
+
+	sdricoh_writel(host, R21C_STATUS, 0x18);
+
+	/* MMC_APP_CMDs need some special handling */
+	if (host->app_cmd) {
+		opcode |= 64;
+		host->app_cmd = 0;
+	} else if (opcode == 55)
+		host->app_cmd = 1;
+
+	/* read/write commands seem to require this */
+	if (data) {
+		sdricoh_writew(host, R226_BLOCKSIZE, data->blksz);
+		sdricoh_writel(host, R208_DATAIO, 0);
+	}
+
+	cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg);
+
+	/* read response buffer */
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				cmd->resp[i] =
+				    sdricoh_readl(host,
+						  R20C_RESP + (3 - i) * 4) << 8;
+				if (i != 3)
+					cmd->resp[i] |=
+					    sdricoh_readb(host, R20C_RESP +
+							  (3 - i) * 4 - 1);
+			}
+		} else
+			cmd->resp[0] = sdricoh_readl(host, R20C_RESP);
+	}
+
+	/* transfer data */
+	if (data && cmd->error == 0) {
+		dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
+			"sg length %i\n", data->blksz, data->blocks,
+			data->sg_len, data->sg->length);
+
+		/* enter data reading mode */
+		sdricoh_writel(host, R21C_STATUS, 0x837f031e);
+		for (i = 0; i < data->blocks; i++) {
+			size_t len = data->blksz;
+			u8 *buf;
+			struct page *page;
+			int result;
+			page = sg_page(data->sg);
+
+			buf = kmap(page) + data->sg->offset + (len * i);
+			result =
+				sdricoh_blockio(host,
+					data->flags & MMC_DATA_READ, buf, len);
+			kunmap(page);
+			flush_dcache_page(page);
+			if (result) {
+				dev_err(dev, "sdricoh_request: cmd %i "
+					"block transfer failed\n", cmd->opcode);
+				cmd->error = result;
+				break;
+			} else
+				data->bytes_xfered += len;
+		}
+
+		sdricoh_writel(host, R208_DATAIO, 1);
+
+		if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED,
+					TRANSFER_TIMEOUT)) {
+			dev_err(dev, "sdricoh_request: transfer end error\n");
+			cmd->error = -EINVAL;
+		}
+	}
+	/* FIXME check busy flag */
+
+	mmc_request_done(mmc, mrq);
+	dev_dbg(dev, "=============================\n");
+}
+
+static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	dev_dbg(host->dev, "set_ios\n");
+
+	if (ios->power_mode == MMC_POWER_ON) {
+		sdricoh_writel(host, R228_POWER, 0xc0e0);
+
+		if (ios->bus_width == MMC_BUS_WIDTH_4) {
+			sdricoh_writel(host, R224_MODE, 0x2000300);
+			sdricoh_writel(host, R228_POWER, 0x40e0);
+		} else {
+			sdricoh_writel(host, R224_MODE, 0x2000340);
+		}
+
+	} else if (ios->power_mode == MMC_POWER_UP) {
+		sdricoh_writel(host, R224_MODE, 0x2000320);
+		sdricoh_writel(host, R228_POWER, 0xe0);
+	}
+}
+
+static int sdricoh_get_ro(struct mmc_host *mmc)
+{
+	struct sdricoh_host *host = mmc_priv(mmc);
+	unsigned int status;
+
+	status = sdricoh_readl(host, R21C_STATUS);
+	sdricoh_writel(host, R2E4_STATUS_RESP, status);
+
+	/* some notebooks seem to have the locked flag switched */
+	if (switchlocked)
+		return !(status & STATUS_CARD_LOCKED);
+
+	return (status & STATUS_CARD_LOCKED);
+}
+
+static struct mmc_host_ops sdricoh_ops = {
+	.request = sdricoh_request,
+	.set_ios = sdricoh_set_ios,
+	.get_ro = sdricoh_get_ro,
+};
+
+/* initialize the control and register it to the mmc framework */
+static int sdricoh_init_mmc(struct pci_dev *pci_dev,
+			    struct pcmcia_device *pcmcia_dev)
+{
+	int result = 0;
+	void __iomem *iobase = NULL;
+	struct mmc_host *mmc = NULL;
+	struct sdricoh_host *host = NULL;
+	struct device *dev = &pcmcia_dev->dev;
+	/* map iomem */
+	if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) !=
+	    SDRICOH_PCI_REGION_SIZE) {
+		dev_dbg(dev, "unexpected pci resource len\n");
+		return -ENODEV;
+	}
+	iobase =
+	    pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE);
+	if (!iobase) {
+		dev_err(dev, "unable to map iobase\n");
+		return -ENODEV;
+	}
+	/* check version? */
+	if (readl(iobase + R104_VERSION) != 0x4000) {
+		dev_dbg(dev, "no supported mmc controller found\n");
+		result = -ENODEV;
+		goto err;
+	}
+	/* allocate privdata */
+	mmc = pcmcia_dev->priv =
+	    mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev);
+	if (!mmc) {
+		dev_err(dev, "mmc_alloc_host failed\n");
+		result = -ENOMEM;
+		goto err;
+	}
+	host = mmc_priv(mmc);
+
+	host->iobase = iobase;
+	host->dev = dev;
+	host->pci_dev = pci_dev;
+
+	mmc->ops = &sdricoh_ops;
+
+	/* FIXME: frequency and voltage handling is done by the controller
+	 */
+	mmc->f_min = 450000;
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	mmc->max_seg_size = 1024 * 512;
+	mmc->max_blk_size = 512;
+
+	/* reset the controler */
+	if (sdricoh_reset(host)) {
+		dev_dbg(dev, "could not reset\n");
+		result = -EIO;
+		goto err;
+
+	}
+
+	result = mmc_add_host(mmc);
+
+	if (!result) {
+		dev_dbg(dev, "mmc host registered\n");
+		return 0;
+	}
+
+err:
+	if (iobase)
+		iounmap(iobase);
+	if (mmc)
+		mmc_free_host(mmc);
+
+	return result;
+}
+
+/* search for supported mmc controllers */
+static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
+{
+	struct pci_dev *pci_dev = NULL;
+
+	dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
+		" %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
+
+	/* search pci cardbus bridge that contains the mmc controler */
+	/* the io region is already claimed by yenta_socket... */
+	while ((pci_dev =
+		pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476,
+			       pci_dev))) {
+		/* try to init the device */
+		if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) {
+			dev_info(&pcmcia_dev->dev, "MMC controller found\n");
+			return 0;
+		}
+
+	}
+	dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n");
+	return -ENODEV;
+}
+
+static void sdricoh_pcmcia_detach(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+
+	dev_dbg(&link->dev, "detach\n");
+
+	/* remove mmc host */
+	if (mmc) {
+		struct sdricoh_host *host = mmc_priv(mmc);
+		mmc_remove_host(mmc);
+		pci_iounmap(host->pci_dev, host->iobase);
+		pci_dev_put(host->pci_dev);
+		mmc_free_host(mmc);
+	}
+	pcmcia_disable_device(link);
+
+}
+
+#ifdef CONFIG_PM
+static int sdricoh_pcmcia_suspend(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+	dev_dbg(&link->dev, "suspend\n");
+	mmc_suspend_host(mmc, PMSG_SUSPEND);
+	return 0;
+}
+
+static int sdricoh_pcmcia_resume(struct pcmcia_device *link)
+{
+	struct mmc_host *mmc = link->priv;
+	dev_dbg(&link->dev, "resume\n");
+	sdricoh_reset(mmc_priv(mmc));
+	mmc_resume_host(mmc);
+	return 0;
+}
+#else
+#define sdricoh_pcmcia_suspend NULL
+#define sdricoh_pcmcia_resume NULL
+#endif
+
+static struct pcmcia_driver sdricoh_driver = {
+	.drv = {
+		.name = DRIVER_NAME,
+		},
+	.probe = sdricoh_pcmcia_probe,
+	.remove = sdricoh_pcmcia_detach,
+	.id_table = pcmcia_ids,
+	.suspend = sdricoh_pcmcia_suspend,
+	.resume = sdricoh_pcmcia_resume,
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdricoh_drv_init(void)
+{
+	return pcmcia_register_driver(&sdricoh_driver);
+}
+
+static void __exit sdricoh_drv_exit(void)
+{
+	pcmcia_unregister_driver(&sdricoh_driver);
+}
+
+module_init(sdricoh_drv_init);
+module_exit(sdricoh_drv_exit);
+
+module_param(switchlocked, uint, 0444);
+
+MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>");
+MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(switchlocked, "Switch the cards locked status."
+		"Use this when unlocked cards are shown readonly (default 0)");
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 1c14a186f00..13844843e8d 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -973,7 +973,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
 
 	mmc->ops = &tifm_sd_ops;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
 	mmc->f_min = 20000000 / 60;
 	mmc->f_max = 24000000;
 
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index c303e7f57ab..adda3795203 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -68,16 +68,16 @@ static const int unlock_codes[] = { 0x83, 0x87 };
 
 static const int valid_ids[] = {
 	0x7112,
-	};
+};
 
 #ifdef CONFIG_PNP
-static unsigned int nopnp = 0;
+static unsigned int param_nopnp = 0;
 #else
-static const unsigned int nopnp = 1;
+static const unsigned int param_nopnp = 1;
 #endif
-static unsigned int io = 0x248;
-static unsigned int irq = 6;
-static int dma = 2;
+static unsigned int param_io = 0x248;
+static unsigned int param_irq = 6;
+static int param_dma = 2;
 
 /*
  * Basic functions
@@ -939,7 +939,7 @@ static int wbsd_get_ro(struct mmc_host *mmc)
 
 	spin_unlock_bh(&host->lock);
 
-	return csr & WBSD_WRPT;
+	return !!(csr & WBSD_WRPT);
 }
 
 static const struct mmc_host_ops wbsd_ops = {
@@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev)
 	mmc->f_min = 375000;
 	mmc->f_max = 24000000;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
 
 	spin_lock_init(&host->lock);
 
@@ -1420,7 +1420,7 @@ kfree:
 
 	dma_unmap_single(mmc_dev(host->mmc), host->dma_addr,
 		WBSD_DMA_SIZE, DMA_BIDIRECTIONAL);
-	host->dma_addr = (dma_addr_t)NULL;
+	host->dma_addr = 0;
 
 	kfree(host->dma_buffer);
 	host->dma_buffer = NULL;
@@ -1445,7 +1445,7 @@ static void wbsd_release_dma(struct wbsd_host *host)
 
 	host->dma = -1;
 	host->dma_buffer = NULL;
-	host->dma_addr = (dma_addr_t)NULL;
+	host->dma_addr = 0;
 }
 
 /*
@@ -1765,7 +1765,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp)
 static int __devinit wbsd_probe(struct platform_device *dev)
 {
 	/* Use the module parameters for resources */
-	return wbsd_init(&dev->dev, io, irq, dma, 0);
+	return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0);
 }
 
 static int __devexit wbsd_remove(struct platform_device *dev)
@@ -1979,14 +1979,14 @@ static int __init wbsd_drv_init(void)
 
 #ifdef CONFIG_PNP
 
-	if (!nopnp) {
+	if (!param_nopnp) {
 		result = pnp_register_driver(&wbsd_pnp_driver);
 		if (result < 0)
 			return result;
 	}
 #endif /* CONFIG_PNP */
 
-	if (nopnp) {
+	if (param_nopnp) {
 		result = platform_driver_register(&wbsd_driver);
 		if (result < 0)
 			return result;
@@ -2012,12 +2012,12 @@ static void __exit wbsd_drv_exit(void)
 {
 #ifdef CONFIG_PNP
 
-	if (!nopnp)
+	if (!param_nopnp)
 		pnp_unregister_driver(&wbsd_pnp_driver);
 
 #endif /* CONFIG_PNP */
 
-	if (nopnp) {
+	if (param_nopnp) {
 		platform_device_unregister(wbsd_device);
 
 		platform_driver_unregister(&wbsd_driver);
@@ -2029,11 +2029,11 @@ static void __exit wbsd_drv_exit(void)
 module_init(wbsd_drv_init);
 module_exit(wbsd_drv_exit);
 #ifdef CONFIG_PNP
-module_param(nopnp, uint, 0444);
+module_param_named(nopnp, param_nopnp, uint, 0444);
 #endif
-module_param(io, uint, 0444);
-module_param(irq, uint, 0444);
-module_param(dma, int, 0444);
+module_param_named(io, param_io, uint, 0444);
+module_param_named(irq, param_irq, uint, 0444);
+module_param_named(dma, param_dma, int, 0444);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");