aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/maps/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/mtd/maps/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/mtd/maps/Kconfig')
-rw-r--r--drivers/mtd/maps/Kconfig663
1 files changed, 663 insertions, 0 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
new file mode 100644
index 00000000000..8480057eadb
--- /dev/null
+++ b/drivers/mtd/maps/Kconfig
@@ -0,0 +1,663 @@
+# drivers/mtd/maps/Kconfig
+# $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $
+
+menu "Mapping drivers for chip access"
+ depends on MTD!=n
+
+config MTD_COMPLEX_MAPPINGS
+ bool "Support non-linear mappings of flash chips"
+ depends on MTD
+ help
+ This causes the chip drivers to allow for complicated
+ paged mappings of flash chips.
+
+config MTD_PHYSMAP
+ tristate "CFI Flash device in physical memory map"
+ depends on MTD_CFI
+ help
+ This provides a 'mapping' driver which allows the CFI probe and
+ command set driver code to communicate with flash chips which
+ are mapped physically into the CPU's memory. You will need to
+ configure the physical address and size of the flash chips on
+ your particular board as well as the bus width, either statically
+ with config options or at run-time.
+
+config MTD_PHYSMAP_START
+ hex "Physical start address of flash mapping"
+ depends on MTD_PHYSMAP
+ default "0x8000000"
+ help
+ This is the physical memory location at which the flash chips
+ are mapped on your particular target board. Refer to the
+ memory map which should hopefully be in the documentation for
+ your board.
+ Ignore this option if you use run-time physmap configuration
+ (i.e., run-time calling physmap_configure()).
+
+config MTD_PHYSMAP_LEN
+ hex "Physical length of flash mapping"
+ depends on MTD_PHYSMAP
+ default "0x4000000"
+ help
+ This is the total length of the mapping of the flash chips on
+ your particular board. If there is space, or aliases, in the
+ physical memory map between the chips, this could be larger
+ than the total amount of flash present. Refer to the memory
+ map which should hopefully be in the documentation for your
+ board.
+ Ignore this option if you use run-time physmap configuration
+ (i.e., run-time calling physmap_configure()).
+
+config MTD_PHYSMAP_BANKWIDTH
+ int "Bank width in octets"
+ depends on MTD_PHYSMAP
+ default "2"
+ help
+ This is the total width of the data bus of the flash devices
+ in octets. For example, if you have a data bus width of 32
+ bits, you would set the bus width octect value to 4. This is
+ used internally by the CFI drivers.
+ Ignore this option if you use run-time physmap configuration
+ (i.e., run-time calling physmap_configure()).
+
+config MTD_SUN_UFLASH
+ tristate "Sun Microsystems userflash support"
+ depends on (SPARC32 || SPARC64) && MTD_CFI
+ help
+ This provides a 'mapping' driver which supports the way in
+ which user-programmable flash chips are connected on various
+ Sun Microsystems boardsets. This driver will require CFI support
+ in the kernel, so if you did not enable CFI previously, do that now.
+
+config MTD_PNC2000
+ tristate "CFI Flash device mapped on Photron PNC-2000"
+ depends on X86 && MTD_CFI && MTD_PARTITIONS
+ help
+ PNC-2000 is the name of Network Camera product from PHOTRON
+ Ltd. in Japan. It uses CFI-compliant flash.
+
+config MTD_SC520CDP
+ tristate "CFI Flash device mapped on AMD SC520 CDP"
+ depends on X86 && MTD_CFI
+ help
+ The SC520 CDP board has two banks of CFI-compliant chips and one
+ Dual-in-line JEDEC chip. This 'mapping' driver supports that
+ arrangement, implementing three MTD devices.
+
+config MTD_NETSC520
+ tristate "CFI Flash device mapped on AMD NetSc520"
+ depends on X86 && MTD_CFI && MTD_PARTITIONS
+ help
+ This enables access routines for the flash chips on the AMD NetSc520
+ demonstration board. If you have one of these boards and would like
+ to use the flash chips on it, say 'Y'.
+
+config MTD_TS5500
+ tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
+ depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS
+ help
+ This provides a driver for the on-board flash of the Technologic
+ System's TS-5500 board. The flash is split into 3 partitions
+ which are accessed as separate MTD devices.
+
+ mtd0 and mtd2 are the two BIOS drives. Unfortunately the BIOS
+ uses a proprietary flash translation layer from General Software,
+ which is not supported (the drives cannot be mounted). You can
+ create your own file system (jffs for example), but the BIOS
+ won't be able to boot from it.
+
+ mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
+
+ Note that jumper 3 ("Write Enable Drive A") must be set
+ otherwise detection won't succeeed.
+
+config MTD_SBC_GXX
+ tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
+ depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+ help
+ This provides a driver for the on-board flash of Arcom Control
+ Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
+ By default the flash is split into 3 partitions which are accessed
+ as separate MTD devices. This board utilizes Intel StrataFlash.
+ More info at
+ <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
+
+config MTD_ELAN_104NC
+ tristate "CFI Flash device mapped on Arcom ELAN-104NC"
+ depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+ help
+ This provides a driver for the on-board flash of the Arcom Control
+ System's ELAN-104NC development board. By default the flash
+ is split into 3 partitions which are accessed as separate MTD
+ devices. This board utilizes Intel StrataFlash. More info at
+ <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
+
+config MTD_LUBBOCK
+ tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
+ depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
+ help
+ This provides a driver for the on-board flash of the Intel
+ 'Lubbock' XScale evaluation board.
+
+config MTD_OCTAGON
+ tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
+ depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
+ help
+ This provides a 'mapping' driver which supports the way in which
+ the flash chips are connected in the Octagon-5066 Single Board
+ Computer. More information on the board is available at
+ <http://www.octagonsystems.com/CPUpages/5066.html>.
+
+config MTD_VMAX
+ tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
+ depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
+ help
+ This provides a 'mapping' driver which supports the way in which
+ the flash chips are connected in the Tempustech VMAX SBC301 Single
+ Board Computer. More information on the board is available at
+ <http://www.tempustech.com/>.
+
+config MTD_SCx200_DOCFLASH
+ tristate "Flash device mapped with DOCCS on NatSemi SCx200"
+ depends on SCx200 && MTD_CFI && MTD_PARTITIONS
+ help
+ Enable support for a flash chip mapped using the DOCCS signal on a
+ National Semiconductor SCx200 processor.
+
+ If you don't know what to do here, say N.
+
+ If compiled as a module, it will be called scx200_docflash.
+
+config MTD_AMD76XROM
+ tristate "BIOS flash chip on AMD76x southbridge"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on AMD76x motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_ICHXROM
+ tristate "BIOS flash chip on Intel Controller Hub 2/3/4/5"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on ICHX motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_SCB2_FLASH
+ tristate "BIOS flash chip on Intel SCB2 boards"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on Intel SCB2 boards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_TSUNAMI
+ tristate "Flash chips on Tsunami TIG bus"
+ depends on ALPHA_TSUNAMI && MTD_COMPLEX_MAPPINGS
+ help
+ Support for the flash chip on Tsunami TIG bus.
+
+config MTD_LASAT
+ tristate "Flash chips on LASAT board"
+ depends on LASAT
+ help
+ Support for the flash chips on the Lasat 100 and 200 boards.
+
+config MTD_NETtel
+ tristate "CFI flash device on SnapGear/SecureEdge"
+ depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
+ help
+ Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+
+config MTD_PB1XXX
+ tristate "Flash devices on Alchemy PB1xxx boards"
+ depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 )
+ help
+ Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards
+
+config MTD_PB1XXX_BOOT
+ bool "PB1x00 boot flash device"
+ depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+ help
+ Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board.
+ You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use
+ both banks.
+
+config MTD_PB1XXX_USER
+ bool "PB1x00 user flash device"
+ depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 )
+ default y if MTD_PB1XX_BOOT = n
+ help
+ Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board.
+ You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
+ both banks.
+
+config MTD_PB1550
+ tristate "Flash devices on Alchemy PB1550 board"
+ depends on MIPS && MIPS_PB1550
+ help
+ Flash memory access on Alchemy Pb1550 board
+
+config MTD_PB1550_BOOT
+ bool "PB1550 boot flash device"
+ depends on MTD_PB1550
+ help
+ Use the first of the two 64MiB flash banks on Pb1550 board.
+ You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use
+ both banks.
+
+config MTD_PB1550_USER
+ bool "PB1550 user flash device"
+ depends on MTD_PB1550
+ default y if MTD_PB1550_BOOT = n
+ help
+ Use the second of the two 64MiB flash banks on Pb1550 board.
+ You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use
+ both banks.
+
+config MTD_DB1550
+ tristate "Flash devices on Alchemy DB1550 board"
+ depends on MIPS && MIPS_DB1550
+ help
+ Flash memory access on Alchemy Db1550 board
+
+config MTD_DB1550_BOOT
+ bool "DB1550 boot flash device"
+ depends on MTD_DB1550
+ help
+ Use the first of the two 64MiB flash banks on Db1550 board.
+ You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use
+ both banks.
+
+config MTD_DB1550_USER
+ bool "DB1550 user flash device"
+ depends on MTD_DB1550
+ default y if MTD_DB1550_BOOT = n
+ help
+ Use the second of the two 64MiB flash banks on Db1550 board.
+ You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use
+ both banks.
+
+config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
+ help
+ MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
+ For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
+ and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
+
+config MTD_DILNETPC_BOOTSIZE
+ hex "Size of DIL/Net PC flash boot partition"
+ depends on MTD_DILNETPC
+ default "0x80000"
+ help
+ The amount of space taken up by the kernel or Etherboot
+ on the DIL/Net PC flash chips.
+
+config MTD_L440GX
+ tristate "BIOS flash chip on Intel L440GX boards"
+ depends on X86 && MTD_JEDECPROBE
+ help
+ Support for treating the BIOS flash chip on Intel L440GX motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_SBC8240
+ tristate "Flash device on SBC8240"
+ depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+ help
+ Flash access on the SBC8240 board from Wind River. See
+ <http://www.windriver.com/products/sbc8240/>
+
+config MTD_TQM8XXL
+ tristate "CFI Flash device mapped on TQM8XXL"
+ depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
+ help
+ The TQM8xxL PowerPC board has up to two banks of CFI-compliant
+ chips, currently uses AMD one. This 'mapping' driver supports
+ that arrangement, allowing the CFI probe and command set driver
+ code to communicate with the chips on the TQM8xxL board. More at
+ <http://www.denx.de/embedded-ppc-en.html>.
+
+config MTD_RPXLITE
+ tristate "CFI Flash device mapped on RPX Lite or CLLF"
+ depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE)
+ help
+ The RPXLite PowerPC board has CFI-compliant chips mapped in
+ a strange sparse mapping. This 'mapping' driver supports that
+ arrangement, allowing the CFI probe and command set driver code
+ to communicate with the chips on the RPXLite board. More at
+ <http://www.embeddedplanet.com/>.
+
+config MTD_MBX860
+ tristate "System flash on MBX860 board"
+ depends on MTD_CFI && PPC32 && 8xx && MBX
+ help
+ This enables access routines for the flash chips on the Motorola
+ MBX860 board. If you have one of these boards and would like
+ to use the flash chips on it, say 'Y'.
+
+config MTD_DBOX2
+ tristate "CFI Flash device mapped on D-Box2"
+ depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+ help
+ This enables access routines for the flash chips on the Nokia/Sagem
+ D-Box 2 board. If you have one of these boards and would like to use
+ the flash chips on it, say 'Y'.
+
+config MTD_CFI_FLAGADM
+ tristate "CFI Flash device mapping on FlagaDM"
+ depends on PPC32 && 8xx && MTD_CFI
+ help
+ Mapping for the Flaga digital module. If you don't have one, ignore
+ this setting.
+
+config MTD_BEECH
+ tristate "CFI Flash device mapped on IBM 405LP Beech"
+ depends on MTD_CFI && PPC32 && 40x && BEECH
+ help
+ This enables access routines for the flash chips on the IBM
+ 405LP Beech board. If you have one of these boards and would like
+ to use the flash chips on it, say 'Y'.
+
+config MTD_ARCTIC
+ tristate "CFI Flash device mapped on IBM 405LP Arctic"
+ depends on MTD_CFI && PPC32 && 40x && ARCTIC2
+ help
+ This enables access routines for the flash chips on the IBM 405LP
+ Arctic board. If you have one of these boards and would like to
+ use the flash chips on it, say 'Y'.
+
+config MTD_WALNUT
+ tristate "Flash device mapped on IBM 405GP Walnut"
+ depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT
+ help
+ This enables access routines for the flash chips on the IBM 405GP
+ Walnut board. If you have one of these boards and would like to
+ use the flash chips on it, say 'Y'.
+
+config MTD_EBONY
+ tristate "Flash devices mapped on IBM 440GP Ebony"
+ depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY
+ help
+ This enables access routines for the flash chips on the IBM 440GP
+ Ebony board. If you have one of these boards and would like to
+ use the flash chips on it, say 'Y'.
+
+config MTD_OCOTEA
+ tristate "Flash devices mapped on IBM 440GX Ocotea"
+ depends on MTD_CFI && PPC32 && 44x && OCOTEA
+ help
+ This enables access routines for the flash chips on the IBM 440GX
+ Ocotea board. If you have one of these boards and would like to
+ use the flash chips on it, say 'Y'.
+
+config MTD_REDWOOD
+ tristate "CFI Flash devices mapped on IBM Redwood"
+ depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+ help
+ This enables access routines for the flash chips on the IBM
+ Redwood board. If you have one of these boards and would like to
+ use the flash chips on it, say 'Y'.
+
+config MTD_CSTM_MIPS_IXX
+ tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
+ depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
+ help
+ This provides a mapping driver for the Integrated Technology
+ Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
+ Reference Board. It provides the necessary addressing, length,
+ buswidth, vpp code and addition setup of the flash device for
+ these boards. In addition, this mapping driver can be used for
+ other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
+ LEN/BUSWIDTH parameters. This mapping will provide one mtd device
+ using one partition. The start address can be offset from the
+ beginning of flash and the len can be less than the total flash
+ device size to allow a window into the flash. Both CFI and JEDEC
+ probes are called.
+
+config MTD_CSTM_MIPS_IXX_START
+ hex "Physical start address of flash mapping"
+ depends on MTD_CSTM_MIPS_IXX
+ default "0x8000000"
+ help
+ This is the physical memory location that the MTD driver will
+ use for the flash chips on your particular target board.
+ Refer to the memory map which should hopefully be in the
+ documentation for your board.
+
+config MTD_CSTM_MIPS_IXX_LEN
+ hex "Physical length of flash mapping"
+ depends on MTD_CSTM_MIPS_IXX
+ default "0x4000000"
+ help
+ This is the total length that the MTD driver will use for the
+ flash chips on your particular board. Refer to the memory
+ map which should hopefully be in the documentation for your
+ board.
+
+config MTD_CSTM_MIPS_IXX_BUSWIDTH
+ int "Bus width in octets"
+ depends on MTD_CSTM_MIPS_IXX
+ default "2"
+ help
+ This is the total bus width of the mapping of the flash chips
+ on your particular board.
+
+config MTD_OCELOT
+ tristate "Momenco Ocelot boot flash device"
+ depends on MIPS && MOMENCO_OCELOT
+ help
+ This enables access routines for the boot flash device and for the
+ NVRAM on the Momenco Ocelot board. If you have one of these boards
+ and would like access to either of these, say 'Y'.
+
+config MTD_SOLUTIONENGINE
+ tristate "CFI Flash device mapped on Hitachi SolutionEngine"
+ depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+ help
+ This enables access to the flash chips on the Hitachi SolutionEngine and
+ similar boards. Say 'Y' if you are building a kernel for such a board.
+
+config MTD_ARM_INTEGRATOR
+ tristate "CFI Flash device mapped on ARM Integrator/P720T"
+ depends on ARM && MTD_CFI
+
+config MTD_CDB89712
+ tristate "Cirrus CDB89712 evaluation board mappings"
+ depends on ARM && MTD_CFI && ARCH_CDB89712
+ help
+ This enables access to the flash or ROM chips on the CDB89712 board.
+ If you have such a board, say 'Y'.
+
+config MTD_SA1100
+ tristate "CFI Flash device mapped on StrongARM SA11x0"
+ depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+ help
+ This enables access to the flash chips on most platforms based on
+ the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
+ If you have such a board, say 'Y'.
+
+config MTD_IPAQ
+ tristate "CFI Flash device mapped on Compaq/HP iPAQ"
+ depends on ARM && IPAQ_HANDHELD && MTD_CFI
+ help
+ This provides a driver for the on-board flash of the iPAQ.
+
+config MTD_DC21285
+ tristate "CFI Flash device mapped on DC21285 Footbridge"
+ depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
+ help
+ This provides a driver for the flash accessed using Intel's
+ 21285 bridge used with Intel's StrongARM processors. More info at
+ <http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
+
+config MTD_IQ80310
+ tristate "CFI Flash device mapped on the XScale IQ80310 board"
+ depends on ARM && MTD_CFI && ARCH_IQ80310
+ help
+ This enables access routines for the flash chips on the Intel XScale
+ IQ80310 evaluation board. If you have one of these boards and would
+ like to use the flash chips on it, say 'Y'.
+
+config MTD_IXP4XX
+ tristate "CFI Flash device mapped on Intel IXP4xx based systems"
+ depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
+ help
+ This enables MTD access to flash devices on platforms based
+ on Intel's IXP4xx family of network processors such as the
+ IXDP425 and Coyote. If you have an IXP4xx based board and
+ would like to use the flash chips on it, say 'Y'.
+
+config MTD_IXP2000
+ tristate "CFI Flash device mapped on Intel IXP2000 based systems"
+ depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
+ help
+ This enables MTD access to flash devices on platforms based
+ on Intel's IXP2000 family of network processors such as the
+ IXDP425 and Coyote. If you have an IXP2000 based board and
+ would like to use the flash chips on it, say 'Y'.
+
+config MTD_EPXA10DB
+ tristate "CFI Flash device mapped on Epxa10db"
+ depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
+ help
+ This enables support for the flash devices on the Altera
+ Excalibur XA10 Development Board. If you are building a kernel
+ for on of these boards then you should say 'Y' otherwise say 'N'.
+
+config MTD_FORTUNET
+ tristate "CFI Flash device mapped on the FortuNet board"
+ depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+ help
+ This enables access to the Flash on the FortuNet board. If you
+ have such a board, say 'Y'.
+
+config MTD_AUTCPU12
+ tristate "NV-RAM mapping AUTCPU12 board"
+ depends on ARM && ARCH_AUTCPU12
+ help
+ This enables access to the NV-RAM on autronix autcpu12 board.
+ If you have such a board, say 'Y'.
+
+config MTD_EDB7312
+ tristate "CFI Flash device mapped on EDB7312"
+ depends on ARM && MTD_CFI
+ help
+ This enables access to the CFI Flash on the Cogent EDB7312 board.
+ If you have such a board, say 'Y' here.
+
+config MTD_IMPA7
+ tristate "JEDEC Flash device mapped on impA7"
+ depends on ARM && MTD_JEDECPROBE
+ help
+ This enables access to the NOR Flash on the impA7 board of
+ implementa GmbH. If you have such a board, say 'Y' here.
+
+config MTD_CEIVA
+ tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
+ depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA
+ help
+ This enables access to the flash chips on the Ceiva/Polaroid
+ PhotoMax Digital Picture Frame.
+ If you have such a device, say 'Y'.
+
+config MTD_NOR_TOTO
+ tristate "NOR Flash device on TOTO board"
+ depends on ARM && ARCH_OMAP && OMAP_TOTO
+ help
+ This enables access to the NOR flash on the Texas Instruments
+ TOTO board.
+
+config MTD_H720X
+ tristate "Hynix evaluation board mappings"
+ depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
+ help
+ This enables access to the flash chips on the Hynix evaluation boards.
+ If you have such a board, say 'Y'.
+
+config MTD_MPC1211
+ tristate "CFI Flash device mapped on Interface MPC-1211"
+ depends on SUPERH && SH_MPC1211 && MTD_CFI
+ help
+ This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
+ If you have such a board, say 'Y'.
+
+# This needs CFI or JEDEC, depending on the cards found.
+config MTD_PCI
+ tristate "PCI MTD driver"
+ depends on MTD && PCI && MTD_COMPLEX_MAPPINGS
+ help
+ Mapping for accessing flash devices on add-in cards like the Intel XScale
+ IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode
+ (please see the manual for the link settings).
+
+ If you are not sure, say N.
+
+config MTD_PCMCIA
+ tristate "PCMCIA MTD driver"
+ depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
+ help
+ Map driver for accessing PCMCIA linear flash memory cards. These
+ cards are usually around 4-16MiB in size. This does not include
+ Compact Flash cards which are treated as IDE devices.
+
+config MTD_UCLINUX
+ tristate "Generic uClinux RAM/ROM filesystem support"
+ depends on MTD_PARTITIONS && !MMU
+ help
+ Map driver to support image based filesystems for uClinux.
+
+config MTD_WRSBC8260
+ tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
+ depends on (SBC82xx || SBC8560)
+ select MTD_PARTITIONS
+ select MTD_MAP_BANK_WIDTH_4
+ select MTD_MAP_BANK_WIDTH_1
+ select MTD_CFI_I1
+ select MTD_CFI_I4
+ help
+ Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
+ all three flash regions on CS0, CS1 and CS6 if they are configured
+ correctly by the boot loader.
+
+config MTD_DMV182
+ tristate "Map driver for Dy-4 SVME/DMV-182 board."
+ depends on DMV182
+ select MTD_PARTITIONS
+ select MTD_MAP_BANK_WIDTH_32
+ select MTD_CFI_I8
+ select MTD_CFI_AMDSTD
+ help
+ Map driver for Dy-4 SVME/DMV-182 board.
+
+config MTD_BAST
+ tristate "Map driver for Simtec BAST (EB2410ITX)"
+ depends on ARCH_BAST
+ select MTD_PARTITIONS
+ select MTD_MAP_BANK_WIDTH_16
+ select MTD_JEDECPROBE
+ help
+ Map driver for NOR flash on the Simtec BAST (EB2410ITX).
+
+ Note, this driver *cannot* over-ride the WP link on the
+ board, or currently detect the state of the link.
+
+config MTD_BAST_MAXSIZE
+ int "Maximum size for BAST flash area (MiB)"
+ depends on MTD_BAST
+ default "4"
+
+config MTD_SHARP_SL
+ bool "ROM maped on Sharp SL Series"
+ depends on MTD && ARCH_PXA
+ help
+ This enables access to the flash chip on the Sharp SL Series of PDAs.
+
+endmenu
+