aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r--drivers/net/Kconfig2538
1 files changed, 2538 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
new file mode 100644
index 00000000000..74d57865a81
--- /dev/null
+++ b/drivers/net/Kconfig
@@ -0,0 +1,2538 @@
+
+#
+# Network device configuration
+#
+
+config NETDEVICES
+ depends on NET
+ bool "Network device support"
+ ---help---
+ You can say N here if you don't intend to connect your Linux box to
+ any other computer at all.
+
+ You'll have to say Y if your computer contains a network card that
+ you want to use under Linux. If you are going to run SLIP or PPP over
+ telephone line or null modem cable you need say Y here. Connecting
+ two machines with parallel ports using PLIP needs this, as well as
+ AX.25/KISS for sending Internet traffic over amateur radio links.
+
+ See also "The Linux Network Administrator's Guide" by Olaf Kirch and
+ Terry Dawson. Available at <http://www.tldp.org/guides.html>.
+
+ If unsure, say Y.
+
+config DUMMY
+ tristate "Dummy net driver support"
+ depends on NETDEVICES
+ ---help---
+ This is essentially a bit-bucket device (i.e. traffic you send to
+ this device is consigned into oblivion) with a configurable IP
+ address. It is most commonly used in order to make your currently
+ inactive SLIP address seem like a real address for local programs.
+ If you use SLIP or PPP, you might want to say Y here. Since this
+ thing often comes in handy, the default is Y. It won't enlarge your
+ kernel either. What a deal. Read about it in the Network
+ Administrator's Guide, available from
+ <http://www.tldp.org/docs.html#guide>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dummy. If you want to use more than one dummy
+ device at a time, you need to compile this driver as a module.
+ Instead of 'dummy', the devices will then be called 'dummy0',
+ 'dummy1' etc.
+
+config BONDING
+ tristate "Bonding driver support"
+ depends on NETDEVICES
+ depends on INET
+ ---help---
+ Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+ Channels together. This is called 'Etherchannel' by Cisco,
+ 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+ The driver supports multiple bonding modes to allow for both high
+ perfomance and high availability operation.
+
+ Refer to <file:Documentation/networking/bonding.txt> for more
+ information.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bonding.
+
+config EQUALIZER
+ tristate "EQL (serial line load balancing) support"
+ depends on NETDEVICES
+ ---help---
+ If you have two serial connections to some other computer (this
+ usually requires two modems and two telephone lines) and you use
+ SLIP (the protocol for sending Internet traffic over telephone
+ lines) or PPP (a better SLIP) on them, you can make them behave like
+ one double speed connection using this driver. Naturally, this has
+ to be supported at the other end as well, either with a similar EQL
+ Linux driver or with a Livingston Portmaster 2e.
+
+ Say Y if you want this and read
+ <file:Documentation/networking/eql.txt>. You may also want to read
+ section 6.2 of the NET-3-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
+config TUN
+ tristate "Universal TUN/TAP device driver support"
+ depends on NETDEVICES
+ select CRC32
+ ---help---
+ TUN/TAP provides packet reception and transmission for user space
+ programs. It can be viewed as a simple Point-to-Point or Ethernet
+ device, which instead of receiving packets from a physical media,
+ receives them from user space program and instead of sending packets
+ via physical media writes them to the user space program.
+
+ When a program opens /dev/net/tun, driver creates and registers
+ corresponding net device tunX or tapX. After a program closed above
+ devices, driver will automatically delete tunXX or tapXX device and
+ all routes corresponding to it.
+
+ Please read <file:Documentation/networking/tuntap.txt> for more
+ information.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tun.
+
+ If you don't know what to use this for, you don't need it.
+
+config NET_SB1000
+ tristate "General Instruments Surfboard 1000"
+ depends on NETDEVICES && PNP
+ ---help---
+ This is a driver for the General Instrument (also known as
+ NextLevel) SURFboard 1000 internal
+ cable modem. This is an ISA card which is used by a number of cable
+ TV companies to provide cable modem access. It's a one-way
+ downstream-only cable modem, meaning that your upstream net link is
+ provided by your regular phone modem.
+
+ At present this driver only compiles as a module, so say M here if
+ you have this card. The module will be called sb1000. Then read
+ <file:Documentation/networking/README.sb1000> for information on how
+ to use this module, as it needs special ppp scripts for establishing
+ a connection. Further documentation and the necessary scripts can be
+ found at:
+
+ <http://www.jacksonville.net/~fventuri/>
+ <http://home.adelphia.net/~siglercm/sb1000.html>
+ <http://linuxpower.cx/~cable/>
+
+ If you don't have this card, of course say N.
+
+if NETDEVICES
+ source "drivers/net/arcnet/Kconfig"
+endif
+
+#
+# Ethernet
+#
+
+menu "Ethernet (10 or 100Mbit)"
+ depends on NETDEVICES && !UML
+
+config NET_ETHERNET
+ bool "Ethernet (10 or 100Mbit)"
+ ---help---
+ Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+ type of Local Area Network (LAN) in universities and companies.
+
+ Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+ coaxial cable, linking computers in a chain), 10BASE-T or twisted
+ pair (10 Mbps over twisted pair cable, linking computers to central
+ hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+ 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+ 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+ cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+ [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+ Ethernet (1 Gbps over optical fiber or short copper links).
+
+ If your Linux machine will be connected to an Ethernet and you have
+ an Ethernet network interface card (NIC) installed in your computer,
+ say Y here and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You will then also have
+ to say Y to the driver for your particular NIC.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Ethernet network cards. If unsure, say N.
+
+config MII
+ tristate "Generic Media Independent Interface device support"
+ depends on NET_ETHERNET
+ help
+ Most ethernet controllers have MII transceiver either as an external
+ or internal device. It is safe to say Y or M here even if your
+ ethernet card lack MII.
+
+source "drivers/net/arm/Kconfig"
+
+config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+ select CRC32
+ help
+ Power Macintoshes and clones with Ethernet built-in on the
+ motherboard will usually use a MACE (Medium Access Control for
+ Ethernet) interface. Say Y to include support for the MACE chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mace.
+
+config MACE_AAUI_PORT
+ bool "Use AAUI port instead of TP by default"
+ depends on MACE
+ help
+ Some Apple machines (notably the Apple Network Server) which use the
+ MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
+ Y here if you have such a machine. If unsure, say N.
+ The driver will default to AAUI on ANS anyway, and if you use it as
+ a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+ tristate "BMAC (G3 ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+ select CRC32
+ help
+ Say Y for support of BMAC Ethernet interfaces. These are used on G3
+ computers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bmac.
+
+config OAKNET
+ tristate "National DP83902AV (Oak ethernet) support"
+ depends on NET_ETHERNET && PPC && BROKEN
+ select CRC32
+ help
+ Say Y if your machine has this type of Ethernet network card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called oaknet.
+
+config ARIADNE
+ tristate "Ariadne support"
+ depends on NET_ETHERNET && ZORRO
+ help
+ If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ariadne.
+
+config A2065
+ tristate "A2065 support"
+ depends on NET_ETHERNET && ZORRO
+ select CRC32
+ help
+ If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called a2065.
+
+config HYDRA
+ tristate "Hydra support"
+ depends on NET_ETHERNET && ZORRO
+ select CRC32
+ help
+ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hydra.
+
+config ZORRO8390
+ tristate "Zorro NS8390-based Ethernet support"
+ depends on NET_ETHERNET && ZORRO
+ select CRC32
+ help
+ This driver is for Zorro Ethernet cards using an NS8390-compatible
+ chipset, like the Village Tronic Ariadne II and the Individual
+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called zorro8390.
+
+config APNE
+ tristate "PCMCIA NE2000 support"
+ depends on NET_ETHERNET && AMIGA_PCMCIA
+ select CRC32
+ help
+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called apne.
+
+config APOLLO_ELPLUS
+ tristate "Apollo 3c505 support"
+ depends on NET_ETHERNET && APOLLO
+ help
+ Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
+ If you don't have one made for Apollos, you can use one from a PC,
+ except that your Apollo won't be able to boot from it (because the
+ code in the ROM will be for a PC).
+
+config MAC8390
+ bool "Macintosh NS 8390 based ethernet cards"
+ depends on NET_ETHERNET && MAC
+ select CRC32
+ help
+ If you want to include a driver to support Nubus or LC-PDS
+ Ethernet cards using an NS8390 chipset or its equivalent, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config MAC89x0
+ tristate "Macintosh CS89x0 based ethernet cards"
+ depends on NET_ETHERNET && MAC && BROKEN
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. This module will
+ be called mac89x0.
+
+config MACSONIC
+ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+ depends on NET_ETHERNET && MAC
+ ---help---
+ Support for NatSemi SONIC based Ethernet devices. This includes
+ the onboard Ethernet in many Quadras as well as some LC-PDS,
+ a few Nubus and all known Comm Slot Ethernet cards. If you have
+ one of these say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. This module will
+ be called macsonic.
+
+config MACMACE
+ bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
+ depends on NET_ETHERNET && MAC && EXPERIMENTAL
+ select CRC32
+ help
+ Support for the onboard AMD 79C940 MACE Ethernet controller used in
+ the 660AV and 840AV Macintosh. If you have one of these Macintoshes
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config MVME147_NET
+ tristate "MVME147 (Lance) Ethernet support"
+ depends on NET_ETHERNET && MVME147
+ select CRC32
+ help
+ Support for the on-board Ethernet interface on the Motorola MVME147
+ single-board computer. Say Y here to include the
+ driver for this chip in your kernel.
+ To compile this driver as a module, choose M here.
+
+config MVME16x_NET
+ tristate "MVME16x Ethernet support"
+ depends on NET_ETHERNET && MVME16x
+ help
+ This is the driver for the Ethernet interface on the Motorola
+ MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
+ driver for this chip in your kernel.
+ To compile this driver as a module, choose M here.
+
+config BVME6000_NET
+ tristate "BVME6000 Ethernet support"
+ depends on NET_ETHERNET && BVME6000
+ help
+ This is the driver for the Ethernet interface on BVME4000 and
+ BVME6000 VME boards. Say Y here to include the driver for this chip
+ in your kernel.
+ To compile this driver as a module, choose M here.
+
+config ATARILANCE
+ tristate "Atari Lance support"
+ depends on NET_ETHERNET && ATARI
+ help
+ Say Y to include support for several Atari Ethernet adapters based
+ on the AMD Lance chipset: RieblCard (with or without battery), or
+ PAMCard VME (also the version by Rhotron, with different addresses).
+
+config ATARI_BIONET
+ tristate "BioNet-100 support"
+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ help
+ Say Y to include support for BioData's BioNet-100 Ethernet adapter
+ for the ACSI port. The driver works (has to work...) with a polled
+ I/O scheme, so it's rather slow :-(
+
+config ATARI_PAMSNET
+ tristate "PAMsNet support"
+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+ help
+ Say Y to include support for the PAMsNet Ethernet adapter for the
+ ACSI port ("ACSI node"). The driver works (has to work...) with a
+ polled I/O scheme, so it's rather slow :-(
+
+config SUN3LANCE
+ tristate "Sun3/Sun3x on-board LANCE support"
+ depends on NET_ETHERNET && (SUN3 || SUN3X)
+ help
+ Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+ featured an AMD Lance 10Mbit Ethernet controller on board; say Y
+ here to compile in the Linux driver for this and enable Ethernet.
+ General Linux information on the Sun 3 and 3x series (now
+ discontinued) is at
+ <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+ If you're not building a kernel for a Sun 3, say N.
+
+config SUN3_82586
+ tristate "Sun3 on-board Intel 82586 support"
+ depends on NET_ETHERNET && SUN3
+ help
+ This driver enables support for the on-board Intel 82586 based
+ Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
+ that this driver does not support 82586-based adapters on additional
+ VME boards.
+
+config HPLANCE
+ bool "HP on-board LANCE support"
+ depends on NET_ETHERNET && DIO
+ select CRC32
+ help
+ If you want to use the builtin "LANCE" Ethernet controller on an
+ HP300 machine, say Y here.
+
+config LASI_82596
+ tristate "Lasi ethernet"
+ depends on NET_ETHERNET && PARISC && GSC_LASI
+ help
+ Say Y here to support the on-board Intel 82596 ethernet controller
+ built into Hewlett-Packard PA-RISC machines.
+
+config MIPS_JAZZ_SONIC
+ tristate "MIPS JAZZ onboard SONIC Ethernet support"
+ depends on NET_ETHERNET && MACH_JAZZ
+ help
+ This is the driver for the onboard card of MIPS Magnum 4000,
+ Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config MIPS_GT96100ETH
+ bool "MIPS GT96100 Ethernet support"
+ depends on NET_ETHERNET && MIPS_GT96100
+ help
+ Say Y here to support the Ethernet subsystem on your GT96100 card.
+
+config MIPS_AU1X00_ENET
+ bool "MIPS AU1000 Ethernet support"
+ depends on NET_ETHERNET && SOC_AU1X00
+ select CRC32
+ help
+ If you have an Alchemy Semi AU1X00 based system
+ say Y. Otherwise, say N.
+
+config NET_SB1250_MAC
+ tristate "SB1250 Ethernet support"
+ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+
+config SGI_IOC3_ETH
+ bool "SGI IOC3 Ethernet"
+ depends on NET_ETHERNET && PCI && SGI_IP27
+ select CRC32
+ select MII
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SGI_IOC3_ETH_HW_RX_CSUM
+ bool "Receive hardware checksums"
+ depends on SGI_IOC3_ETH && INET
+ default y
+ help
+ The SGI IOC3 network adapter supports TCP and UDP checksums in
+ hardware to offload processing of these checksums from the CPU. At
+ the moment only acceleration of IPv4 is supported. This option
+ enables offloading for checksums on receive. If unsure, say Y.
+
+config SGI_IOC3_ETH_HW_TX_CSUM
+ bool "Transmit hardware checksums"
+ depends on SGI_IOC3_ETH && INET
+ default y
+ help
+ The SGI IOC3 network adapter supports TCP and UDP checksums in
+ hardware to offload processing of these checksums from the CPU. At
+ the moment only acceleration of IPv4 is supported. This option
+ enables offloading for checksums on transmit. If unsure, say Y.
+
+config SGI_O2MACE_ETH
+ tristate "SGI O2 MACE Fast Ethernet support"
+ depends on NET_ETHERNET && SGI_IP32=y
+
+config STNIC
+ tristate "National DP83902AV support"
+ depends on NET_ETHERNET && SUPERH
+ select CRC32
+ help
+ Support for cards based on the National Semiconductor DP83902AV
+ ST-NIC Serial Network Interface Controller for Twisted Pair. This
+ is a 10Mbit/sec Ethernet controller. Product overview and specs at
+ <http://www.national.com/pf/DP/DP83902A.html>.
+
+ If unsure, say N.
+
+config SUNLANCE
+ tristate "Sun LANCE support"
+ depends on NET_ETHERNET && SBUS
+ select CRC32
+ help
+ This driver supports the "le" interface present on all 32-bit Sparc
+ systems, on some older Ultra systems and as an Sbus option. These
+ cards are based on the AMD Lance chipset, which is better known
+ via the NE2100 cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunlance.
+
+config HAPPYMEAL
+ tristate "Sun Happy Meal 10/100baseT support"
+ depends on NET_ETHERNET && (SBUS || PCI)
+ select CRC32
+ help
+ This driver supports the "hme" interface present on most Ultra
+ systems and as an option on older Sbus systems. This driver supports
+ both PCI and Sbus devices. This driver also supports the "qfe" quad
+ 100baseT device available in both PCI and Sbus configurations.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunhme.
+
+config SUNBMAC
+ tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
+ depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+ select CRC32
+ help
+ This driver supports the "be" interface available as an Sbus option.
+ This is Sun's older 100baseT Ethernet device.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunbmac.
+
+config SUNQE
+ tristate "Sun QuadEthernet support"
+ depends on NET_ETHERNET && SBUS
+ select CRC32
+ help
+ This driver supports the "qe" 10baseT Ethernet device, available as
+ an Sbus option. Note that this is not the same as Quad FastEthernet
+ "qfe" which is supported by the Happy Meal driver instead.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunqe.
+
+config SUNGEM
+ tristate "Sun GEM support"
+ depends on NET_ETHERNET && PCI
+ select CRC32
+ help
+ Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
+ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+config NET_VENDOR_3COM
+ bool "3COM cards"
+ depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+ help
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about 3COM cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config EL1
+ tristate "3c501 \"EtherLink\" support"
+ depends on NET_VENDOR_3COM && ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
+ new card, since the 3c501 is slow, broken, and obsolete: you will
+ have problems. Some people suggest to ping ("man ping") a nearby
+ machine every minute ("man cron") when using this card.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c501.
+
+config EL2
+ tristate "3c503 \"EtherLink II\" support"
+ depends on NET_VENDOR_3COM && ISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c503.
+
+config ELPLUS
+ tristate "3c505 \"EtherLink Plus\" support"
+ depends on NET_VENDOR_3COM && ISA
+ ---help---
+ Information about this network (Ethernet) card can be found in
+ <file:Documentation/networking/3c505.txt>. If you have a card of
+ this type, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c505.
+
+config EL16
+ tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+ depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c507.
+
+config EL3
+ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+ depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
+ ---help---
+ If you have a network (Ethernet) card belonging to the 3Com
+ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>.
+
+ If your card is not working you may need to use the DOS
+ setup disk to disable Plug & Play mode, and to select the default
+ media type.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c509.
+
+config 3C515
+ tristate "3c515 ISA \"Fast EtherLink\""
+ depends on NET_VENDOR_3COM && (ISA || EISA)
+ help
+ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+ network card, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c515.
+
+config ELMC
+ tristate "3c523 \"EtherLink/MC\" support"
+ depends on NET_VENDOR_3COM && MCA_LEGACY
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c523.
+
+config ELMC_II
+ tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+ depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called 3c527.
+
+config VORTEX
+ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+ depends on NET_VENDOR_3COM && (PCI || EISA)
+ select MII
+ ---help---
+ This option enables driver support for a large number of 10mbps and
+ 10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+
+ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
+ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
+ "Tornado" (3c905) PCI
+ "Hurricane" (3c555/3cSOHO) PCI
+
+ If you have such a card, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>. More
+ specific information is in
+ <file:Documentation/networking/vortex.txt> and in the comments at
+ the beginning of <file:drivers/net/3c59x.c>.
+
+ To compile this support as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>.
+
+config TYPHOON
+ tristate "3cr990 series \"Typhoon\" support"
+ depends on NET_VENDOR_3COM && PCI
+ select CRC32
+ ---help---
+ This option enables driver support for the 3cr990 series of cards:
+
+ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called typhoon.
+
+config LANCE
+ tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+ depends on NET_ETHERNET && ISA
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+ of this type.
+
+ To compile this driver as a module, choose M here: the module
+ will be called lance. This is recommended.
+
+config NET_VENDOR_SMC
+ bool "Western Digital/SMC cards"
+ depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+ help
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+config WD80x3
+ tristate "WD80*3 support"
+ depends on NET_VENDOR_SMC && ISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called wd.
+
+config ULTRAMCA
+ tristate "SMC Ultra MCA support"
+ depends on NET_VENDOR_SMC && MCA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type and are running
+ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc-mca.
+
+config ULTRA
+ tristate "SMC Ultra support"
+ depends on NET_VENDOR_SMC && ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Important: There have been many reports that, with some motherboards
+ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+ such as some BusLogic models) causes corruption problems with many
+ operating systems. The Linux smc-ultra driver has a work-around for
+ this but keep it in mind if you have such a SCSI card and have
+ problems.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc-ultra.
+
+config ULTRA32
+ tristate "SMC Ultra32 EISA support"
+ depends on NET_VENDOR_SMC && EISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc-ultra32.
+
+config SMC91X
+ tristate "SMC 91C9x/91C1xxx support"
+ select CRC32
+ select MII
+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH)
+ help
+ This is a driver for SMC's 91x series of Ethernet chipsets,
+ including the SMC91C94 and the SMC91C111. Say Y if you want it
+ compiled into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.linuxdoc.org/docs.html#howto>.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called smc91x. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt> as well
+ as <file:Documentation/networking/net-modules.txt>.
+
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smc9194.
+
+config NET_VENDOR_RACAL
+ bool "Racal-Interlan (Micom) NI cards"
+ depends on NET_ETHERNET && ISA
+ help
+ If you have a network (Ethernet) card belonging to this class, such
+ as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about NI cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config NI5010
+ tristate "NI5010 support (EXPERIMENTAL)"
+ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that this is still
+ experimental code.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ni5010.
+
+config NI52
+ tristate "NI5210 support"
+ depends on NET_VENDOR_RACAL && ISA
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ni52.
+
+config NI65
+ tristate "NI6510 support"
+ depends on NET_VENDOR_RACAL && ISA
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ni65.
+
+source "drivers/net/tulip/Kconfig"
+
+config AT1700
+ tristate "AT1700/1720 support (EXPERIMENTAL)"
+ depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called at1700.
+
+config DEPCA
+ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+ depends on NET_ETHERNET && (ISA || EISA || MCA)
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:drivers/net/depca.c>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called depca.
+
+config HP100
+ tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
+ depends on NET_ETHERNET && (ISA || EISA || PCI)
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called hp100.
+
+config NET_ISA
+ bool "Other ISA cards"
+ depends on NET_ETHERNET && ISA
+ ---help---
+ If your network (Ethernet) card hasn't been mentioned yet and its
+ bus system (that's the way the cards talks to the other components
+ of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
+ Make sure you know the name of your card. Read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ If unsure, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the remaining ISA network card questions. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+config E2100
+ tristate "Cabletron E21xx support"
+ depends on NET_ISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called e2100.
+
+config EWRK3
+ tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+ depends on NET_ISA
+ select CRC32
+ ---help---
+ This driver supports the DE203, DE204 and DE205 network (Ethernet)
+ cards. If this is for you, say Y and read
+ <file:Documentation/networking/ewrk3.txt> in the kernel source as
+ well as the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ewrk3.
+
+config EEXPRESS
+ tristate "EtherExpress 16 support"
+ depends on NET_ISA
+ ---help---
+ If you have an EtherExpress16 network (Ethernet) card, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that the Intel
+ EtherExpress16 card used to be regarded as a very poor choice
+ because the driver was very unreliable. We now have a new driver
+ that should do better.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called eexpress.
+
+config EEXPRESS_PRO
+ tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+ depends on NET_ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y. This
+ driver supports intel i82595{FX,TX} based boards. Note however
+ that the EtherExpress PRO/100 Ethernet card has its own separate
+ driver. Please read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called eepro.
+
+config FMV18X
+ tristate "FMV-181/182/183/184 support (OBSOLETE)"
+ depends on NET_ISA && OBSOLETE
+ ---help---
+ If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you use an FMV-183 or FMV-184 and it is not working, you may need
+ to disable Plug & Play mode of the card.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called fmv18x.
+
+config HPLAN_PLUS
+ tristate "HP PCLAN+ (27247B and 27252A) support"
+ depends on NET_ISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called hp-plus.
+
+config HPLAN
+ tristate "HP PCLAN (27245 and other 27xxx series) support"
+ depends on NET_ISA
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called hp.
+
+config LP486E
+ tristate "LP486E on board Ethernet"
+ depends on NET_ISA
+ help
+ Say Y here to support the 82596-based on-board Ethernet controller
+ for the Panther motherboard, which is one of the two shipped in the
+ Intel Professional Workstation.
+
+config ETH16I
+ tristate "ICL EtherTeam 16i/32 support"
+ depends on NET_ISA
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called eth16i.
+
+config NE2000
+ tristate "NE2000/NE1000 support"
+ depends on NET_ISA || (Q40 && m) || M32R
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
+ without a specific driver are compatible with NE2000.
+
+ If you have a PCI NE2000 card however, say N here and Y to "PCI
+ NE2000 support", above. If you have a NE2000 card and are running on
+ an MCA system (a bus system used on some IBM PS/2 computers and
+ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+ below.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ne.
+
+config ZNET
+ tristate "Zenith Z-Note support (EXPERIMENTAL)"
+ depends on NET_ISA && EXPERIMENTAL
+ help
+ The Zenith Z-Note notebook computer has a built-in network
+ (Ethernet) card, and this is the Linux driver for it. Note that the
+ IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+ by this driver. Read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SEEQ8005
+ tristate "SEEQ8005 support (EXPERIMENTAL)"
+ depends on NET_ISA && EXPERIMENTAL
+ help
+ This is a driver for the SEEQ 8005 network (Ethernet) card. If this
+ is for you, read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called seeq8005.
+
+config SK_G16
+ tristate "SK_G16 support (OBSOLETE)"
+ depends on NET_ISA && OBSOLETE
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config SKMC
+ tristate "SKnet MCA support"
+ depends on NET_ETHERNET && MCA && BROKEN
+ ---help---
+ These are Micro Channel Ethernet adapters. You need to say Y to "MCA
+ support" in order to use this driver. Supported cards are the SKnet
+ Junior MC2 and the SKnet MC2(+). The driver automatically
+ distinguishes between the two cards. Note that using multiple boards
+ of different type hasn't been tested with this driver. Say Y if you
+ have one of these Ethernet adapters.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called sk_mca.
+
+config NE2_MCA
+ tristate "NE/2 (ne2000 MCA version) support"
+ depends on NET_ETHERNET && MCA_LEGACY
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ne2.
+
+config IBMLANA
+ tristate "IBM LAN Adapter/A support"
+ depends on NET_ETHERNET && MCA && MCA_LEGACY
+ ---help---
+ This is a Micro Channel Ethernet adapter. You need to set
+ CONFIG_MCA to use this driver. It is both available as an in-kernel
+ driver and as a module.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The only
+ currently supported card is the IBM LAN Adapter/A for Ethernet. It
+ will both support 16K and 32K memory windows, however a 32K window
+ gives a better security against packet losses. Usage of multiple
+ boards with this driver should be possible, but has not been tested
+ up to now due to lack of hardware.
+
+config IBMVETH
+ tristate "IBM LAN Virtual Ethernet support"
+ depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
+ ---help---
+ This driver supports virtual ethernet adapters on newer IBM iSeries
+ and pSeries systems.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will
+ be called ibmveth.
+
+config IBM_EMAC
+ tristate "IBM PPC4xx EMAC driver support"
+ depends on 4xx
+ select CRC32
+ ---help---
+ This driver supports the IBM PPC4xx EMAC family of on-chip
+ Ethernet controllers.
+
+config IBM_EMAC_ERRMSG
+ bool "Verbose error messages"
+ depends on IBM_EMAC
+
+config IBM_EMAC_RXB
+ int "Number of receive buffers"
+ depends on IBM_EMAC
+ default "128" if IBM_EMAC4
+ default "64"
+
+config IBM_EMAC_TXB
+ int "Number of transmit buffers"
+ depends on IBM_EMAC
+ default "128" if IBM_EMAC4
+ default "8"
+
+config IBM_EMAC_FGAP
+ int "Frame gap"
+ depends on IBM_EMAC
+ default "8"
+
+config IBM_EMAC_SKBRES
+ int "Skb reserve amount"
+ depends on IBM_EMAC
+ default "0"
+
+config NET_PCI
+ bool "EISA, VLB, PCI and on board controllers"
+ depends on NET_ETHERNET && (ISA || EISA || PCI)
+ help
+ This is another class of network cards which attach directly to the
+ bus. If you have one of those, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about this class of network cards. If you say Y, you
+ will be asked for your specific card in the following questions. If
+ you are unsure, say Y.
+
+config PCNET32
+ tristate "AMD PCnet32 PCI support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+ answer Y here and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called pcnet32.
+
+config AMD8111_ETH
+ tristate "AMD 8111 (new PCI lance) support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ If you have an AMD 8111-based PCI lance ethernet card,
+ answer Y here and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called amd8111e.
+config AMD8111E_NAPI
+ bool "Enable NAPI support"
+ depends on AMD8111_ETH
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config ADAPTEC_STARFIRE
+ tristate "Adaptec Starfire/DuraLAN support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+ adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+ Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+ driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called starfire. This is recommended.
+
+config ADAPTEC_STARFIRE_NAPI
+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+ depends on ADAPTEC_STARFIRE && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config AC3200
+ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+ depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ac3200.
+
+config APRICOT
+ tristate "Apricot Xen-II on board Ethernet"
+ depends on NET_PCI && ISA
+ help
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called apricot.
+
+config B44
+ tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
+ depends on NET_PCI && PCI && EXPERIMENTAL
+ select MII
+ help
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called b44.
+
+config FORCEDETH
+ tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)"
+ depends on NET_PCI && PCI && EXPERIMENTAL
+ help
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called forcedeth.
+
+
+config CS89x0
+ tristate "CS89x0 support"
+ depends on NET_PCI && (ISA || ARCH_IXDP2X01)
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ network (Ethernet) card of this type, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:Documentation/networking/cs89x0.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called cs89x.
+
+config TC35815
+ tristate "TOSHIBA TC35815 Ethernet support"
+ depends on NET_PCI && PCI && TOSHIBA_JMR3927
+
+config DGRS
+ tristate "Digi Intl. RightSwitch SE-X support"
+ depends on NET_PCI && (PCI || EISA)
+ ---help---
+ This is support for the Digi International RightSwitch series of
+ PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
+ models. If you have a network card of this type, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. More specific
+ information is contained in <file:Documentation/networking/dgrs.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called dgrs.
+
+config EEPRO100
+ tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
+ depends on NET_PCI && PCI
+ select MII
+ help
+ If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
+ card, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called eepro100.
+
+
+config E100
+ tristate "Intel(R) PRO/100+ support"
+ depends on NET_PCI && PCI
+ select MII
+ ---help---
+ This driver supports Intel(R) PRO/100 family of adapters.
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ to identify the adapter.
+
+ For the latest Intel PRO/100 network driver for Linux, see:
+
+ <http://appsr.intel.com/scripts-df/support_intel.asp>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e100.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called e100.
+
+config LNE390
+ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+ depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called lne390.
+
+config FEALNX
+ tristate "Myson MTD-8xx PCI Ethernet support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
+ cards. Specifications and data at
+ <http://www.myson.com.hk/mtd/datasheet/>.
+
+config NATSEMI
+ tristate "National Semiconductor DP8381x series PCI Ethernet support"
+ depends on NET_PCI && PCI
+ select CRC32
+ help
+ This driver is for the National Semiconductor DP83810 series,
+ which is used in cards from PureData, NetGear, Linksys
+ and others, including the 83815 chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/natsemi.html>.
+
+config NE2K_PCI
+ tristate "PCI NE2000 and clones support (see help)"
+ depends on NET_PCI && PCI
+ select CRC32
+ ---help---
+ This driver is for NE2000 compatible PCI cards. It will not work
+ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+ support" below). If you have a PCI NE2000 network (Ethernet) card,
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver also works for the following NE2000 clone cards:
+ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
+ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
+ Holtek HT80232 Holtek HT80229
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ne2k-pci.
+
+config NE3210
+ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+ depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that this driver
+ will NOT WORK for NE3200 cards as they are completely different.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ne3210.
+
+config ES3210
+ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+ depends on NET_PCI && EISA && EXPERIMENTAL
+ select CRC32
+ help
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called es3210.
+
+config 8139CP
+ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+ depends on NET_PCI && PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ help
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL8139C+ chips. If you have one of those, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139cp. This is recommended.
+
+config 8139TOO
+ tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL8139 chips. If you have one of those, say Y and read
+ the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139too. This is recommended.
+
+config 8139TOO_PIO
+ bool "Use PIO instead of MMIO"
+ default y
+ depends on 8139TOO
+ help
+ This instructs the driver to use programmed I/O ports (PIO) instead
+ of PCI shared memory (MMIO). This can possibly solve some problems
+ in case your mainboard has memory consistency issues. If unsure,
+ say N.
+
+config 8139TOO_TUNE_TWISTER
+ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+ depends on 8139TOO
+ help
+ This implements a function which might come in handy in case you
+ are using low quality on long cabling. It is required for RealTek
+ RTL-8139 revision K boards, and totally unused otherwise. It tries
+ to match the transceiver to the cable characteristics. This is
+ experimental since hardly documented by the manufacturer.
+ If unsure, say Y.
+
+config 8139TOO_8129
+ bool "Support for older RTL-8129/8130 boards"
+ depends on 8139TOO
+ help
+ This enables support for the older and uncommon RTL-8129 and
+ RTL-8130 chips, which support MII via an external transceiver,
+ instead of an internal one. Disabling this option will save some
+ memory by making the code size smaller. If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+ bool "Use older RX-reset method"
+ depends on 8139TOO
+ help
+ The 8139too driver was recently updated to contain a more rapid
+ reset sequence, in the face of severe receive errors. This "new"
+ RX-reset method should be adequate for all boards. But if you
+ experience problems, you can enable this option to restore the
+ old RX-reset behavior. If unsure, say N.
+
+config SIS900
+ tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+ depends on NET_PCI && PCI
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+ SiS 630 and SiS 540 chipsets. If you have one of those, say Y and
+ read the Ethernet-HOWTO, available at
+ <http://www.tldp.org/docs.html#howto>. Please read
+ <file:Documentation/networking/sis900.txt> and comments at the
+ beginning of <file:drivers/net/sis900.c> for more information.
+
+ This driver also supports AMD 79C901 HomePNA so that you can use
+ your phone line as a network cable.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sis900. This is recommended.
+
+config EPIC100
+ tristate "SMC EtherPower II"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+ which is based on the SMC83c17x (EPIC/100).
+ More specific information and updates are available from
+ <http://www.scyld.com/network/epic100.html>.
+
+config SUNDANCE
+ tristate "Sundance Alta support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ This driver is for the Sundance "Alta" chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on SUNDANCE
+ help
+ Enable memory-mapped I/O for interaction with Sundance NIC registers.
+ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+ is known to solve bugs on certain chips.
+
+ If unsure, say N.
+
+config TLAN
+ tristate "TI ThunderLAN support"
+ depends on NET_PCI && (PCI || EISA) && !64BIT
+ ---help---
+ If you have a PCI Ethernet network card based on the ThunderLAN chip
+ which is supported by this driver, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Devices currently supported by this driver are Compaq Netelligent,
+ Compaq NetFlex and Olicom cards. Please read the file
+ <file:Documentation/networking/tlan.txt> for more details.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called tlan.
+
+ Please email feedback to <torben.mathiasen@compaq.com>.
+
+config VIA_RHINE
+ tristate "VIA Rhine support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+ Ethernet functions can also be found integrated on South Bridges
+ (e.g. VT8235).
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-rhine.
+
+config VIA_RHINE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on VIA_RHINE
+ help
+ This instructs the driver to use PCI shared memory (MMIO) instead of
+ programmed I/O ports (PIO). Enabling this gives an improvement in
+ processing time in parts of the driver.
+
+ If unsure, say Y.
+
+config LAN_SAA9730
+ bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)"
+ depends on NET_PCI && EXPERIMENTAL && MIPS
+ help
+ The SAA9730 is a combined multimedia and peripheral controller used
+ in thin clients, Internet access terminals, and diskless
+ workstations.
+ See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
+
+config NET_POCKET
+ bool "Pocket and portable adapters"
+ depends on NET_ETHERNET && ISA
+ ---help---
+ Cute little network (Ethernet) devices which attach to the parallel
+ port ("pocket adapters"), commonly used with laptops. If you have
+ one of those, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you want to plug a network (or some other) card into the PCMCIA
+ (or PC-card) slot of your laptop instead (PCMCIA is the standard for
+ credit card size extension cards used by all modern laptops), you
+ need the pcmcia-cs package (location contained in the file
+ <file:Documentation/Changes>) and you can say N here.
+
+ Laptop users should read the Linux Laptop home page at
+ <http://www.linux-on-laptops.com/> or
+ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about this class of network devices. If you say Y, you
+ will be asked for your specific device in the following questions.
+
+config ATP
+ tristate "AT-LAN-TEC/RealTek pocket adapter support"
+ depends on NET_POCKET && ISA && X86
+ select CRC32
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>, if you
+ want to use this. If you intend to use this driver, you should have
+ said N to the "Parallel printer support", because the two drivers
+ don't like each other.
+
+ To compile this driver as a module, choose M here: the module
+ will be called atp.
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on NET_POCKET && ISA
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on NET_POCKET && ISA
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
+
+config SGISEEQ
+ tristate "SGI Seeq ethernet controller support"
+ depends on NET_ETHERNET && SGI_IP22
+ help
+ Say Y here if you have an Seeq based Ethernet network card. This is
+ used in many Silicon Graphics machines.
+
+config DECLANCE
+ tristate "DEC LANCE ethernet controller support"
+ depends on NET_ETHERNET && MACH_DECSTATION
+ select CRC32
+ help
+ This driver is for the series of Ethernet controllers produced by
+ DEC (now Compaq) based on the AMD Lance chipset, including the
+ DEPCA series. (This chipset is better known via the NE2100 cards.)
+
+config 68360_ENET
+ bool "Motorola 68360 ethernet controller"
+ depends on M68360
+ help
+ Say Y here if you want to use the built-in ethernet controller of
+ the Motorola 68360 processor.
+
+config FEC
+ bool "FEC ethernet controller (of ColdFire 5272)"
+ depends on M5272 || M5282
+ help
+ Say Y here if you want to use the built-in 10/100 Fast ethernet
+ controller on the Motorola ColdFire 5272 processor.
+
+config NE_H8300
+ tristate "NE2000 compatible support for H8/300"
+ depends on H8300 && NET_ETHERNET
+ help
+ Say Y here if you want to use the NE2000 compatible
+ controller on the Renesas H8/300 processor.
+
+source "drivers/net/fec_8xx/Kconfig"
+
+endmenu
+
+#
+# Gigabit Ethernet
+#
+
+menu "Ethernet (1000 Mbit)"
+ depends on NETDEVICES && !UML
+
+config ACENIC
+ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+ depends on PCI
+ ---help---
+ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+ adapter. The driver allows for using the Jumbo Frame option (9000
+ bytes/frame) however it requires that your switches can handle this
+ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+ line.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+ bool "Omit support for old Tigon I based AceNICs"
+ depends on ACENIC
+ help
+ Say Y here if you only have Tigon II based AceNICs and want to leave
+ out support for the older Tigon I based cards which are no longer
+ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+ version)). This will reduce the size of the driver object by
+ app. 100KB. If you are not sure whether your card is a Tigon I or a
+ Tigon II, say N here.
+
+ The safe and default value for this is N.
+
+config DL2K
+ tristate "D-Link DL2000-based Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ help
+ This driver supports D-Link 2000-based gigabit ethernet cards, which
+ includes
+ D-Link DGE-550T Gigabit Ethernet Adapter.
+ D-Link DL2000-based Gigabit Ethernet Adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dl2k.
+
+config E1000
+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called e1000.
+
+config E1000_NAPI
+ bool "Use Rx Polling (NAPI)"
+ depends on E1000
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config MYRI_SBUS
+ tristate "MyriCOM Gigabit Ethernet support"
+ depends on SBUS
+ help
+ This driver supports MyriCOM Sbus gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called myri_sbus. This is recommended.
+
+config NS83820
+ tristate "National Semiconduct DP83820 support"
+ depends on PCI
+ help
+ This is a driver for the National Semiconductor DP83820 series
+ of gigabit ethernet MACs. Cards using this chipset include
+ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
+ zero copy.
+
+config HAMACHI
+ tristate "Packet Engines Hamachi GNIC-II support"
+ depends on PCI
+ select MII
+ help
+ If you have a Gigabit Ethernet card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called hamachi.
+
+config YELLOWFIN
+ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+ used by the Beowulf Linux cluster project. See
+ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+ information about this driver in particular and Beowulf in general.
+
+ To compile this driver as a module, choose M here: the module
+ will be called yellowfin. This is recommended.
+
+config R8169
+ tristate "Realtek 8169 gigabit ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called r8169. This is recommended.
+
+config R8169_NAPI
+ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+ depends on R8169 && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config R8169_VLAN
+ bool "VLAN support"
+ depends on R8169 && VLAN_8021Q
+ ---help---
+ Say Y here for the r8169 driver to support the functions required
+ by the kernel 802.1Q code.
+
+ If in doubt, say Y.
+
+config SK98LIN
+ tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
+ depends on PCI
+ ---help---
+ Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+ compliant Gigabit Ethernet Adapter. The following adapters are supported
+ by this driver:
+ - 3Com 3C940 Gigabit LOM Ethernet Adapter
+ - 3Com 3C941 Gigabit LOM Ethernet Adapter
+ - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
+ - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
+ - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
+ - DGE-530T Gigabit Ethernet Adapter
+ - EG1032 v2 Instant Gigabit Network Adapter
+ - EG1064 v2 Instant Gigabit Network Adapter
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
+ - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
+ - Marvell RDK-8001 Adapter
+ - Marvell RDK-8002 Adapter
+ - Marvell RDK-8003 Adapter
+ - Marvell RDK-8004 Adapter
+ - Marvell RDK-8006 Adapter
+ - Marvell RDK-8007 Adapter
+ - Marvell RDK-8008 Adapter
+ - Marvell RDK-8009 Adapter
+ - Marvell RDK-8010 Adapter
+ - Marvell RDK-8011 Adapter
+ - Marvell RDK-8012 Adapter
+ - Marvell RDK-8052 Adapter
+ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
+ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
+ - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
+ - SK-9521 10/100/1000Base-T Adapter
+ - SK-9521 V2.0 10/100/1000Base-T Adapter
+ - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
+ - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
+ - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
+ - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
+ - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
+ - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
+ - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
+ - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+ - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
+ - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+ - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
+ - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+ - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
+ - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
+ - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
+ - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
+ - SMC EZ Card 1000 (SMC9452TXV.2)
+
+ The adapters support Jumbo Frames.
+ The dual link adapters support link-failover and dual port features.
+ Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
+ the scatter-gather functionality with sendfile(). Please refer to
+ <file:Documentation/networking/sk98lin.txt> for more information about
+ optional driver parameters.
+ Questions concerning this driver may be addressed to:
+ <linux@syskonnect.de>
+
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The module will
+ be called sk98lin. This is recommended.
+
+config VIA_VELOCITY
+ tristate "VIA Velocity support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select CRC_CCITT
+ select MII
+ help
+ If you have a VIA "Velocity" based network card say Y here.
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-velocity.
+
+config TIGON3
+ tristate "Broadcom Tigon3 support"
+ depends on PCI
+ help
+ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tg3. This is recommended.
+
+config GIANFAR
+ tristate "Gianfar Ethernet"
+ depends on 85xx || 83xx
+ help
+ This driver supports the Gigabit TSEC on the MPC85xx
+ family of chips, and the FEC on the 8540
+
+config GFAR_NAPI
+ bool "NAPI Support"
+ depends on GIANFAR
+
+config MV643XX_ETH
+ tristate "MV-643XX Ethernet support"
+ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3
+ help
+ This driver supports the gigabit Ethernet on the Marvell MV643XX
+ chipset which is used in the Momenco Ocelot C and Jaguar ATX and
+ Pegasos II, amongst other PPC and MIPS boards.
+
+config MV643XX_ETH_0
+ bool "MV-643XX Port 0"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 0 of the Marvell MV643XX Gigabit
+ Ethernet.
+
+config MV643XX_ETH_1
+ bool "MV-643XX Port 1"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 1 of the Marvell MV643XX Gigabit
+ Ethernet.
+
+config MV643XX_ETH_2
+ bool "MV-643XX Port 2"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 2 of the Marvell MV643XX Gigabit
+ Ethernet.
+
+endmenu
+
+#
+# 10 Gigabit Ethernet
+#
+
+menu "Ethernet (10000 Mbit)"
+ depends on NETDEVICES && !UML
+
+config IXGB
+ tristate "Intel(R) PRO/10GbE support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/10GbE family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgb.txt>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called ixgb.
+
+config IXGB_NAPI
+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+ depends on IXGB && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config S2IO
+ tristate "S2IO 10Gbe XFrame NIC"
+ depends on PCI
+ ---help---
+ This driver supports the 10Gbe XFrame NIC of S2IO.
+ For help regarding driver compilation, installation and
+ tuning please look into ~/drivers/net/s2io/README.txt.
+
+config S2IO_NAPI
+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+ depends on S2IO && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config 2BUFF_MODE
+ bool "Use 2 Buffer Mode on Rx side."
+ depends on S2IO
+ ---help---
+ On enabling the 2 buffer mode, the received frame will be
+ split into 2 parts before being DMA'ed to the hosts memory.
+ The parts are the ethernet header and ethernet payload.
+ This is useful on systems where DMA'ing to to unaligned
+ physical memory loactions comes with a heavy price.
+ If not sure please say N.
+
+endmenu
+
+if !UML
+source "drivers/net/tokenring/Kconfig"
+
+source "drivers/net/wireless/Kconfig"
+
+source "drivers/net/pcmcia/Kconfig"
+endif
+
+source "drivers/net/wan/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/s390/net/Kconfig"
+
+config ISERIES_VETH
+ tristate "iSeries Virtual Ethernet driver support"
+ depends on NETDEVICES && PPC_ISERIES
+
+config FDDI
+ bool "FDDI driver support"
+ depends on NETDEVICES && (PCI || EISA)
+ help
+ Fiber Distributed Data Interface is a high speed local area network
+ design; essentially a replacement for high speed Ethernet. FDDI can
+ run over copper or fiber. If you are connected to such a network and
+ want a driver for the FDDI card in your computer, say Y here (and
+ then also Y to the driver for your FDDI card, below). Most people
+ will say N.
+
+config DEFXX
+ tristate "Digital DEFEA and DEFPA adapter support"
+ depends on FDDI && (PCI || EISA)
+ help
+ This is support for the DIGITAL series of EISA (DEFEA) and PCI
+ (DEFPA) controllers which can connect you to a local FDDI network.
+
+config SKFP
+ tristate "SysKonnect FDDI PCI support"
+ depends on FDDI && PCI
+ ---help---
+ Say Y here if you have a SysKonnect FDDI PCI adapter.
+ The following adapters are supported by this driver:
+ - SK-5521 (SK-NET FDDI-UP)
+ - SK-5522 (SK-NET FDDI-UP DAS)
+ - SK-5541 (SK-NET FDDI-FP)
+ - SK-5543 (SK-NET FDDI-LP)
+ - SK-5544 (SK-NET FDDI-LP DAS)
+ - SK-5821 (SK-NET FDDI-UP64)
+ - SK-5822 (SK-NET FDDI-UP64 DAS)
+ - SK-5841 (SK-NET FDDI-FP64)
+ - SK-5843 (SK-NET FDDI-LP64)
+ - SK-5844 (SK-NET FDDI-LP64 DAS)
+ - Netelligent 100 FDDI DAS Fibre SC
+ - Netelligent 100 FDDI SAS Fibre SC
+ - Netelligent 100 FDDI DAS UTP
+ - Netelligent 100 FDDI SAS UTP
+ - Netelligent 100 FDDI SAS Fibre MIC
+
+ Read <file:Documentation/networking/skfp.txt> for information about
+ the driver.
+
+ Questions concerning this driver can be addressed to:
+ <linux@syskonnect.de>
+
+ To compile this driver as a module, choose M here: the module
+ will be called skfp. This is recommended.
+
+config HIPPI
+ bool "HIPPI driver support (EXPERIMENTAL)"
+ depends on NETDEVICES && EXPERIMENTAL && INET && PCI
+ help
+ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+ can run over copper (25m) or fiber (300m on multi-mode or 10km on
+ single-mode). HIPPI networks are commonly used for clusters and to
+ connect to super computers. If you are connected to a HIPPI network
+ and have a HIPPI network card in your computer that you want to use
+ under Linux, say Y here (you must also remember to enable the driver
+ for your HIPPI card below). Most people will say N here.
+
+config ROADRUNNER
+ tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+ depends on HIPPI && PCI
+ help
+ Say Y here if this is your PCI HIPPI network card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called rrunner. If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+ bool "Use large TX/RX rings (EXPERIMENTAL)"
+ depends on ROADRUNNER
+ help
+ If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+ of additional memory to allow for fastest operation, both for
+ transmitting and receiving. This memory cannot be used by any other
+ kernel code or by user space programs. Say Y here only if you have
+ the memory.
+
+config PLIP
+ tristate "PLIP (parallel port) support"
+ depends on NETDEVICES && PARPORT
+ ---help---
+ PLIP (Parallel Line Internet Protocol) is used to create a
+ reasonably fast mini network consisting of two (or, rarely, more)
+ local machines. A PLIP link from a Linux box is a popular means to
+ install a Linux distribution on a machine which doesn't have a
+ CD-ROM drive (a minimal system has to be transferred with floppies
+ first). The kernels on both machines need to have this PLIP option
+ enabled for this to work.
+
+ The PLIP driver has two modes, mode 0 and mode 1. The parallel
+ ports (the connectors at the computers with 25 holes) are connected
+ with "null printer" or "Turbo Laplink" cables which can transmit 4
+ bits at a time (mode 0) or with special PLIP cables, to be used on
+ bidirectional parallel ports only, which can transmit 8 bits at a
+ time (mode 1); you can find the wiring of these cables in
+ <file:Documentation/networking/PLIP.txt>. The cables can be up to
+ 15m long. Mode 0 works also if one of the machines runs DOS/Windows
+ and has some PLIP software installed, e.g. the Crynwr PLIP packet
+ driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+ and winsock or NCSA's telnet.
+
+ If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+ as the NET-3-HOWTO, both available from
+ <http://www.tldp.org/docs.html#howto>. Note that the PLIP
+ protocol has been changed and this PLIP driver won't work together
+ with the PLIP support in Linux versions 1.0.x. This option enlarges
+ your kernel by about 8 KB.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called plip. If unsure, say Y or M, in case you buy a laptop
+ later.
+
+config PPP
+ tristate "PPP (point-to-point protocol) support"
+ depends on NETDEVICES
+ ---help---
+ PPP (Point to Point Protocol) is a newer and better SLIP. It serves
+ the same purpose: sending Internet traffic over telephone (and other
+ serial) lines. Ask your access provider if they support it, because
+ otherwise you can't use it; most Internet access providers these
+ days support PPP rather than SLIP.
+
+ To use PPP, you need an additional program called pppd as described
+ in the PPP-HOWTO, available at
+ <http://www.tldp.org/docs.html#howto>. Make sure that you have
+ the version of pppd recommended in <file:Documentation/Changes>.
+ The PPP option enlarges your kernel by about 16 KB.
+
+ There are actually two versions of PPP: the traditional PPP for
+ asynchronous lines, such as regular analog phone lines, and
+ synchronous PPP which can be used over digital ISDN lines for
+ example. If you want to use PPP over phone lines or other
+ asynchronous serial lines, you need to say Y (or M) here and also to
+ the next option, "PPP support for async serial ports". For PPP over
+ synchronous lines, you should say Y (or M) here and to "Support
+ synchronous PPP", below.
+
+ If you said Y to "Version information on all symbols" above, then
+ you cannot compile the PPP driver into the kernel; you can then only
+ compile it as a module. To compile this driver as a module, choose M
+ here and read <file:Documentation/networking/net-modules.txt>.
+ The module will be called ppp_generic.
+
+config PPP_MULTILINK
+ bool "PPP multilink support (EXPERIMENTAL)"
+ depends on PPP && EXPERIMENTAL
+ help
+ PPP multilink is a protocol (defined in RFC 1990) which allows you
+ to combine several (logical or physical) lines into one logical PPP
+ connection, so that you can utilize your full bandwidth.
+
+ This has to be supported at the other end as well and you need a
+ version of the pppd daemon which understands the multilink protocol.
+
+ If unsure, say N.
+
+config PPP_FILTER
+ bool "PPP filtering"
+ depends on PPP
+ help
+ Say Y here if you want to be able to filter the packets passing over
+ PPP interfaces. This allows you to control which packets count as
+ activity (i.e. which packets will reset the idle timer or bring up
+ a demand-dialled link) and which packets are to be dropped entirely.
+ You need to say Y here if you wish to use the pass-filter and
+ active-filter options to pppd.
+
+ If unsure, say N.
+
+config PPP_ASYNC
+ tristate "PPP support for async serial ports"
+ depends on PPP
+ select CRC_CCITT
+ ---help---
+ Say Y (or M) here if you want to be able to use PPP over standard
+ asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
+ a modem (not a synchronous or ISDN modem) to contact your ISP, you
+ need this option.
+
+ To compile this driver as a module, choose M here.
+
+ If unsure, say Y.
+
+config PPP_SYNC_TTY
+ tristate "PPP support for sync tty ports"
+ depends on PPP
+ help
+ Say Y (or M) here if you want to be able to use PPP over synchronous
+ (HDLC) tty devices, such as the SyncLink adapter. These devices
+ are often used for high-speed leased lines like T1/E1.
+
+ To compile this driver as a module, choose M here.
+
+config PPP_DEFLATE
+ tristate "PPP Deflate compression"
+ depends on PPP
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ ---help---
+ Support for the Deflate compression method for PPP, which uses the
+ Deflate algorithm (the same algorithm that gzip uses) to compress
+ each PPP packet before it is sent over the wire. The machine at the
+ other end of the PPP link (usually your ISP) has to support the
+ Deflate compression method as well for this to be useful. Even if
+ they don't support it, it is safe to say Y here.
+
+ To compile this driver as a module, choose M here.
+
+config PPP_BSDCOMP
+ tristate "PPP BSD-Compress compression"
+ depends on PPP
+ ---help---
+ Support for the BSD-Compress compression method for PPP, which uses
+ the LZW compression method to compress each PPP packet before it is
+ sent over the wire. The machine at the other end of the PPP link
+ (usually your ISP) has to support the BSD-Compress compression
+ method as well for this to be useful. Even if they don't support it,
+ it is safe to say Y here.
+
+ The PPP Deflate compression method ("PPP Deflate compression",
+ above) is preferable to BSD-Compress, because it compresses better
+ and is patent-free.
+
+ Note that the BSD compression code will always be compiled as a
+ module; it is called bsd_comp and will show up in the directory
+ modules once you have said "make modules". If unsure, say N.
+
+config PPPOE
+ tristate "PPP over Ethernet (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PPP
+ help
+ Support for PPP over Ethernet.
+
+ This driver requires the latest version of pppd from the CVS
+ repository at cvs.samba.org. Alternatively, see the
+ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+ which contains instruction on how to use this driver (under
+ the heading "Kernel mode PPPoE").
+
+config PPPOATM
+ tristate "PPP over ATM"
+ depends on ATM && PPP
+ help
+ Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+ This implementation does not yet comply with section 8 of RFC2364,
+ which can lead to bad results if the ATM peer loses state and
+ changes its encapsulation unilaterally.
+
+config SLIP
+ tristate "SLIP (serial line) support"
+ depends on NETDEVICES
+ ---help---
+ Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+ connect to your Internet service provider or to connect to some
+ other local Unix box or if you want to configure your Linux box as a
+ Slip/CSlip server for other people to dial in. SLIP (Serial Line
+ Internet Protocol) is a protocol used to send Internet traffic over
+ serial connections such as telephone lines or null modem cables;
+ nowadays, the protocol PPP is more commonly used for this same
+ purpose.
+
+ Normally, your access provider has to support SLIP in order for you
+ to be able to use it, but there is now a SLIP emulator called SLiRP
+ around (available from
+ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+ allows you to use SLIP over a regular dial up shell connection. If
+ you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+ NET-3-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, explains how to
+ configure SLIP. Note that you don't need this option if you just
+ want to run term (term is a program which gives you almost full
+ Internet connectivity if you have a regular dial up shell account on
+ some Internet connected Unix computer. Read
+ <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+ support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called slip.
+
+config SLIP_COMPRESSED
+ bool "CSLIP compressed headers"
+ depends on SLIP
+ ---help---
+ This protocol is faster than SLIP because it uses compression on the
+ TCP/IP headers (not on the data itself), but it has to be supported
+ on both ends. Ask your access provider if you are not sure and
+ answer Y, just in case. You will still be able to use plain SLIP. If
+ you plan to use SLiRP, the SLIP emulator (available from
+ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+ allows you to use SLIP over a regular dial up shell connection, you
+ definitely want to say Y here. The NET-3-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, explains how to configure
+ CSLIP. This won't enlarge your kernel.
+
+config SLIP_SMART
+ bool "Keepalive and linefill"
+ depends on SLIP
+ help
+ Adds additional capabilities to the SLIP driver to support the
+ RELCOM line fill and keepalive monitoring. Ideal on poor quality
+ analogue lines.
+
+config SLIP_MODE_SLIP6
+ bool "Six bit SLIP encapsulation"
+ depends on SLIP
+ help
+ Just occasionally you may need to run IP over hostile serial
+ networks that don't pass all control characters or are only seven
+ bit. Saying Y here adds an extra mode you can use with SLIP:
+ "slip6". In this mode, SLIP will only send normal ASCII symbols over
+ the serial device. Naturally, this has to be supported at the other
+ end of the link as well. It's good enough, for example, to run IP
+ over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+config NET_FC
+ bool "Fibre Channel driver support"
+ depends on NETDEVICES && SCSI && PCI
+ help
+ Fibre Channel is a high speed serial protocol mainly used to connect
+ large storage devices to the computer; it is compatible with and
+ intended to replace SCSI.
+
+ If you intend to use Fibre Channel, you need to have a Fibre channel
+ adaptor card in your computer; say Y here and to the driver for your
+ adaptor below. You also should have said Y to "SCSI support" and
+ "SCSI generic support".
+
+config SHAPER
+ tristate "Traffic Shaper (EXPERIMENTAL)"
+ depends on NETDEVICES && EXPERIMENTAL
+ ---help---
+ The traffic shaper is a virtual network device that allows you to
+ limit the rate of outgoing data flow over some other network device.
+ The traffic that you want to slow down can then be routed through
+ these virtual devices. See
+ <file:Documentation/networking/shaper.txt> for more information.
+
+ An alternative to this traffic shaper is the experimental
+ Class-Based Queueing (CBQ) scheduling support which you get if you
+ say Y to "QoS and/or fair queueing" above.
+
+ To set up and configure shaper devices, you need the shapecfg
+ program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
+ shaper package.
+
+ To compile this driver as a module, choose M here: the module
+ will be called shaper. If unsure, say N.
+
+config NETCONSOLE
+ tristate "Network console logging support (EXPERIMENTAL)"
+ depends on NETDEVICES && EXPERIMENTAL
+ ---help---
+ If you want to log kernel messages over the network, enable this.
+ See <file:Documentation/networking/netconsole.txt> for details.
+