Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...

1 files changed, 60 insertions, 131 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9940ca32583..3e5e64c33e1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -26,14 +26,6 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config NETDEVICES_MULTIQUEUE
-	bool "Netdevice multiple hardware queue support"
-	---help---
-	  Say Y here if you want to allow the network stack to use multiple
-	  hardware TX queues on an ethernet device.
-
-	  Most people will say N here.
-
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -515,6 +507,18 @@ config STNIC
 
 	  If unsure, say N.
 
+config SH_ETH
+	tristate "Renesas SuperH Ethernet support"
+	depends on SUPERH && \
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712)
+	select CRC32
+	select MII
+	select MDIO_BITBANG
+	select PHYLIB
+	help
+	  Renesas SuperH Ethernet device driver.
+	  This driver support SH7710 and SH7712.
+
 config SUNLANCE
 	tristate "Sun LANCE support"
 	depends on SBUS
@@ -917,6 +921,23 @@ config DM9000
 	  To compile this driver as a module, choose M here.  The module
 	  will be called dm9000.
 
+config DM9000_DEBUGLEVEL
+	int "DM9000 maximum debug level"
+	depends on DM9000
+	default 4
+	help
+	  The maximum level of debugging code compiled into the DM9000
+	  driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+	bool "Force simple NSR based PHY polling"
+	depends on DM9000
+	---help---
+	  This configuration forces the DM9000 to use the NSR's LinkStatus
+	  bit to determine if the link is up or down instead of the more
+	  costly MII PHY reads. Note, this will not work if the chip is
+	  operating with an external PHY.
+
 config ENC28J60
 	tristate "ENC28J60 support"
 	depends on EXPERIMENTAL && SPI && NET_ETHERNET
@@ -934,19 +955,11 @@ config ENC28J60_WRITEVERIFY
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
-config DM9000_DEBUGLEVEL
-	int "DM9000 maximum debug level"
-	depends on DM9000
-	default 4
-	help
-	  The maximum level of debugging code compiled into the DM9000
-	  driver.
-
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA || SH_MAGIC_PANEL_R2
+	depends on ARCH_PXA || SUPERH
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -1234,7 +1247,6 @@ config IBMVETH
 	  To compile this driver as a module, choose M here. The module will
 	  be called ibmveth.
 
-source "drivers/net/ibm_emac/Kconfig"
 source "drivers/net/ibm_newemac/Kconfig"
 
 config NET_PCI
@@ -1277,20 +1289,6 @@ config AMD8111_ETH
 	  To compile this driver as a module, choose M here. The module
 	  will be called amd8111e.
 
-config AMD8111E_NAPI
-	bool "Use RX polling (NAPI)"
-	depends on AMD8111_ETH
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on NET_PCI && PCI
@@ -1305,20 +1303,6 @@ config ADAPTEC_STARFIRE
 	  To compile this driver as a module, choose M here: the module
 	  will be called starfire.  This is recommended.
 
-config ADAPTEC_STARFIRE_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on ADAPTEC_STARFIRE && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config AC3200
 	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
 	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
@@ -1661,7 +1645,7 @@ config SUNDANCE_MMIO
 
 config TLAN
 	tristate "TI ThunderLAN support"
-	depends on NET_PCI && (PCI || EISA) && !64BIT
+	depends on NET_PCI && (PCI || EISA)
 	---help---
 	  If you have a PCI Ethernet network card based on the ThunderLAN chip
 	  which is supported by this driver, say Y and read the
@@ -1701,26 +1685,6 @@ config VIA_RHINE_MMIO
 
 	  If unsure, say Y.
 
-config VIA_RHINE_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on VIA_RHINE
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-config LAN_SAA9730
-	bool "Philips SAA9730 Ethernet support"
-	depends on NET_PCI && PCI && MIPS_ATLAS
-	help
-	  The SAA9730 is a combined multimedia and peripheral controller used
-	  in thin clients, Internet access terminals, and diskless
-	  workstations.
-	  See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-
 config SC92031
 	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
 	depends on NET_PCI && PCI && EXPERIMENTAL
@@ -2004,9 +1968,6 @@ config E1000E
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.
 
-config E1000E_ENABLED
-	def_bool E1000E != n
-
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
@@ -2038,6 +1999,15 @@ config IGB
          To compile this driver as a module, choose M here. The module
          will be called igb.
 
+config IGB_LRO 
+	bool "Use software LRO"
+	depends on IGB && INET
+	select INET_LRO
+	---help---
+	  Say Y here if you want to use large receive offload. 
+
+	  If in doubt, say N.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2095,27 +2065,13 @@ config R8169
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.
 
-config R8169_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on R8169 && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config R8169_VLAN
 	bool "VLAN support"
 	depends on R8169 && VLAN_8021Q
 	---help---
 	  Say Y here for the r8169 driver to support the functions required
 	  by the kernel 802.1Q code.
-	  
+
 	  If in doubt, say Y.
 
 config SB1250_MAC
@@ -2218,6 +2174,7 @@ config VIA_VELOCITY
 config TIGON3
 	tristate "Broadcom Tigon3 support"
 	depends on PCI
+	select PHYLIB
 	help
 	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
 
@@ -2273,6 +2230,19 @@ config GELIC_WIRELESS
 	  the driver automatically distinguishes the models, you can
 	  safely enable this option even if you have a wireless-less model.
 
+config GELIC_WIRELESS_OLD_PSK_INTERFACE
+       bool "PS3 Wireless private PSK interface (OBSOLETE)"
+       depends on GELIC_WIRELESS
+       help
+          This option retains the obsolete private interface to pass
+          the PSK from user space programs to the driver.  The PSK
+          stands for 'Pre Shared Key' and is used for WPA[2]-PSK
+          (WPA-Personal) environment.
+          If WPA[2]-PSK is used and you need to use old programs that
+          support only this old interface, say Y.  Otherwise N.
+
+          If unsure, say N.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC
@@ -2282,10 +2252,6 @@ config GIANFAR
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
 	  and MPC86xx family of chips, and the FEC on the 8540.
 
-config GFAR_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on GIANFAR
-
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
 	depends on QUICC_ENGINE
@@ -2294,10 +2260,6 @@ config UCC_GETH
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
 
-config UGETH_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on UCC_GETH
-
 config UGETH_MAGIC_PACKET
 	bool "Magic Packet detection support"
 	depends on UCC_GETH
@@ -2387,18 +2349,11 @@ config CHELSIO_T1_1G
           Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
           are using only 10G cards say 'N' here.
 
-config CHELSIO_T1_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on CHELSIO_T1
-	default y
-	help
-	  NAPI is a driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card.
-
 config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
-	depends on PCI
+	depends on PCI && INET
 	select FW_LOADER
+	select INET_LRO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
@@ -2426,7 +2381,8 @@ config EHEA
 
 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
-	depends on PCI
+	depends on PCI && INET
+	select INET_LRO
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2464,20 +2420,6 @@ config IXGB
 	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.
 
-config IXGB_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on IXGB && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config S2IO
 	tristate "S2IO 10Gbe XFrame NIC"
 	depends on PCI
@@ -2486,20 +2428,6 @@ config S2IO
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/s2io.txt>.
 
-config S2IO_NAPI
-	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-	depends on S2IO && EXPERIMENTAL
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config MYRI10GE
 	tristate "Myricom Myri-10G Ethernet support"
 	depends on PCI && INET
@@ -2564,6 +2492,7 @@ config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
 	select ZLIB_INFLATE
+	select LIBCRC32C
 	help
 	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
 	  To compile this driver as a module, choose M here: the module