e1000: drop dead pcie code from e1000

this patch is the first in a series of clean up patches for e1000 to drop
unused code, and update the driver to kernel spec, and then, to update the
driver to have all available bug fixes.

Call it the e1000 weight loss plan.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 32 insertions, 166 deletions

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 27f996a2010..f2e756f069c 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -82,7 +82,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
 	{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
 	{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
-	{ "rx_header_split", E1000_STAT(rx_hdr_split) },
 	{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
 	{ "tx_smbus", E1000_STAT(stats.mgptc) },
 	{ "rx_smbus", E1000_STAT(stats.mgprc) },
@@ -114,8 +113,6 @@ static int e1000_get_settings(struct net_device *netdev,
 		                   SUPPORTED_1000baseT_Full|
 		                   SUPPORTED_Autoneg |
 		                   SUPPORTED_TP);
-		if (hw->phy_type == e1000_phy_ife)
-			ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 		ecmd->advertising = ADVERTISED_TP;
 
 		if (hw->autoneg == 1) {
@@ -178,14 +175,6 @@ static int e1000_set_settings(struct net_device *netdev,
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	/* When SoL/IDER sessions are active, autoneg/speed/duplex
-	 * cannot be changed */
-	if (e1000_check_phy_reset_block(hw)) {
-		DPRINTK(DRV, ERR, "Cannot change link characteristics "
-		        "when SoL/IDER is active.\n");
-		return -EINVAL;
-	}
-
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
 
@@ -330,10 +319,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
 	else
 		netdev->features &= ~NETIF_F_TSO;
 
-	if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
-		netdev->features |= NETIF_F_TSO6;
-	else
-		netdev->features &= ~NETIF_F_TSO6;
+	netdev->features &= ~NETIF_F_TSO6;
 
 	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->tso_force = true;
@@ -441,7 +427,6 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 	regs_buff[24] = (u32)phy_data;  /* phy local receiver status */
 	regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 	if (hw->mac_type >= e1000_82540 &&
-	    hw->mac_type < e1000_82571 &&
 	    hw->media_type == e1000_media_type_copper) {
 		regs_buff[26] = er32(MANC);
 	}
@@ -554,10 +539,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	ret_val = e1000_write_eeprom(hw, first_word,
 				     last_word - first_word + 1, eeprom_buff);
 
-	/* Update the checksum over the first part of the EEPROM if needed
-	 * and flush shadow RAM for 82573 conrollers */
-	if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
-				(hw->mac_type == e1000_82573)))
+	/* Update the checksum over the first part of the EEPROM if needed */
+	if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
 		e1000_update_eeprom_checksum(hw);
 
 	kfree(eeprom_buff);
@@ -568,31 +551,12 @@ static void e1000_get_drvinfo(struct net_device *netdev,
 			      struct ethtool_drvinfo *drvinfo)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 	char firmware_version[32];
-	u16 eeprom_data;
 
 	strncpy(drvinfo->driver,  e1000_driver_name, 32);
 	strncpy(drvinfo->version, e1000_driver_version, 32);
 
-	/* EEPROM image version # is reported as firmware version # for
-	 * 8257{1|2|3} controllers */
-	e1000_read_eeprom(hw, 5, 1, &eeprom_data);
-	switch (hw->mac_type) {
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_82573:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
-		sprintf(firmware_version, "%d.%d-%d",
-			(eeprom_data & 0xF000) >> 12,
-			(eeprom_data & 0x0FF0) >> 4,
-			eeprom_data & 0x000F);
-		break;
-	default:
-		sprintf(firmware_version, "N/A");
-	}
-
+	sprintf(firmware_version, "N/A");
 	strncpy(drvinfo->fw_version, firmware_version, 32);
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 	drvinfo->regdump_len = e1000_get_regs_len(netdev);
@@ -781,21 +745,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* The status register is Read Only, so a write should fail.
 	 * Some bits that get toggled are ignored.
 	 */
-	switch (hw->mac_type) {
+
 	/* there are several bits on newer hardware that are r/w */
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_80003es2lan:
-		toggle = 0x7FFFF3FF;
-		break;
-	case e1000_82573:
-	case e1000_ich8lan:
-		toggle = 0x7FFFF033;
-		break;
-	default:
-		toggle = 0xFFFFF833;
-		break;
-	}
+	toggle = 0xFFFFF833;
 
 	before = er32(STATUS);
 	value = (er32(STATUS) & toggle);
@@ -810,12 +762,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* restore previous status */
 	ew32(STATUS, before);
 
-	if (hw->mac_type != e1000_ich8lan) {
-		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
-		REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
-	}
+	REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
 
 	REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -830,8 +780,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
 
-	before = (hw->mac_type == e1000_ich8lan ?
-	          0x06C3B33E : 0x06DFB3FE);
+	before = 0x06DFB3FE;
 	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
@@ -839,12 +788,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 		REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 		REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-		if (hw->mac_type != e1000_ich8lan)
-			REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+		REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-		value = (hw->mac_type == e1000_ich8lan ?
-		         E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+		value = E1000_RAR_ENTRIES;
 		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 			                 0xFFFFFFFF);
@@ -859,8 +806,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	}
 
-	value = (hw->mac_type == e1000_ich8lan ?
-			E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+	value = E1000_MC_TBL_SIZE;
 	for (i = 0; i < value; i++)
 		REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 
@@ -933,9 +879,6 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	/* Test each interrupt */
 	for (; i < 10; i++) {
 
-		if (hw->mac_type == e1000_ich8lan && i == 8)
-			continue;
-
 		/* Interrupt to test */
 		mask = 1 << i;
 
@@ -1289,35 +1232,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 		e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
 		/* autoneg off */
 		e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
-	} else if (hw->phy_type == e1000_phy_gg82563)
-		e1000_write_phy_reg(hw,
-		                    GG82563_PHY_KMRN_MODE_CTRL,
-		                    0x1CC);
+	}
 
 	ctrl_reg = er32(CTRL);
 
-	if (hw->phy_type == e1000_phy_ife) {
-		/* force 100, set loopback */
-		e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
+	/* force 1000, set loopback */
+	e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
 
-		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
-			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
-	} else {
-		/* force 1000, set loopback */
-		e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
-
-		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg = er32(CTRL);
-		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
-	}
+	/* Now set up the MAC to the same speed/duplex as the PHY. */
+	ctrl_reg = er32(CTRL);
+	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+			E1000_CTRL_FD);	 /* Force Duplex to FULL */
 
 	if (hw->media_type == e1000_media_type_copper &&
 	   hw->phy_type == e1000_phy_m88)
@@ -1373,14 +1301,8 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82541_rev_2:
 	case e1000_82547:
 	case e1000_82547_rev_2:
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_82573:
-	case e1000_80003es2lan:
-	case e1000_ich8lan:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
-
 	default:
 		/* Default PHY loopback work is to read the MII
 		 * control register and assert bit 14 (loopback mode).
@@ -1409,14 +1331,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		case e1000_82546_rev_3:
 			return e1000_set_phy_loopback(adapter);
 			break;
-		case e1000_82571:
-		case e1000_82572:
-#define E1000_SERDES_LB_ON 0x410
-			e1000_set_phy_loopback(adapter);
-			ew32(SCTL, E1000_SERDES_LB_ON);
-			msleep(10);
-			return 0;
-			break;
 		default:
 			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
@@ -1440,26 +1354,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl);
 
 	switch (hw->mac_type) {
-	case e1000_82571:
-	case e1000_82572:
-		if (hw->media_type == e1000_media_type_fiber ||
-		    hw->media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
-			ew32(SCTL, E1000_SERDES_LB_OFF);
-			msleep(10);
-			break;
-		}
-		/* Fall Through */
 	case e1000_82545:
 	case e1000_82546:
 	case e1000_82545_rev_3:
 	case e1000_82546_rev_3:
 	default:
 		hw->autoneg = true;
-		if (hw->phy_type == e1000_phy_gg82563)
-			e1000_write_phy_reg(hw,
-					    GG82563_PHY_KMRN_MODE_CTRL,
-					    0x180);
 		e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 		if (phy_reg & MII_CR_LOOPBACK) {
 			phy_reg &= ~MII_CR_LOOPBACK;
@@ -1560,17 +1460,6 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 
 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 {
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* PHY loopback cannot be performed if SoL/IDER
-	 * sessions are active */
-	if (e1000_check_phy_reset_block(hw)) {
-		DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
-		        "when SoL/IDER is active.\n");
-		*data = 0;
-		goto out;
-	}
-
 	*data = e1000_setup_desc_rings(adapter);
 	if (*data)
 		goto out;
@@ -1716,15 +1605,11 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 	case E1000_DEV_ID_82545EM_COPPER:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER:
 	case E1000_DEV_ID_82546GB_PCIE:
-	case E1000_DEV_ID_82571EB_SERDES_QUAD:
 		/* these don't support WoL at all */
 		wol->supported = 0;
 		break;
 	case E1000_DEV_ID_82546EB_FIBER:
 	case E1000_DEV_ID_82546GB_FIBER:
-	case E1000_DEV_ID_82571EB_FIBER:
-	case E1000_DEV_ID_82571EB_SERDES:
-	case E1000_DEV_ID_82571EB_COPPER:
 		/* Wake events not supported on port B */
 		if (er32(STATUS) & E1000_STATUS_FUNC_1) {
 			wol->supported = 0;
@@ -1733,10 +1618,6 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82571EB_QUAD_COPPER:
-	case E1000_DEV_ID_82571EB_QUAD_FIBER:
-	case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
-	case E1000_DEV_ID_82571PT_QUAD_COPPER:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		/* quad port adapters only support WoL on port A */
 		if (!adapter->quad_port_a) {
@@ -1872,30 +1753,15 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 	if (!data)
 		data = INT_MAX;
 
-	if (hw->mac_type < e1000_82571) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long)adapter;
-		}
-		e1000_setup_led(hw);
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
-	} else if (hw->phy_type == e1000_phy_ife) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long)adapter;
-		}
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
-		e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
-	} else {
-		e1000_blink_led_start(hw);
-		msleep_interruptible(data * 1000);
+	if (!adapter->blink_timer.function) {
+		init_timer(&adapter->blink_timer);
+		adapter->blink_timer.function = e1000_led_blink_callback;
+		adapter->blink_timer.data = (unsigned long)adapter;
 	}
+	e1000_setup_led(hw);
+	mod_timer(&adapter->blink_timer, jiffies);
+	msleep_interruptible(data * 1000);
+	del_timer_sync(&adapter->blink_timer);
 
 	e1000_led_off(hw);
 	clear_bit(E1000_LED_ON, &adapter->led_status);