Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

4 files changed, 98 insertions, 100 deletions

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index aec378e7441..318bdb28a7c 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -421,6 +421,7 @@ struct e1000_info {
 /* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
+#define FLAG2_IS_DISCARDING               (1 << 2)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -583,7 +584,6 @@ extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
 extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
                                          u16 data);
-extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
 extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
 extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
 extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 061cd100aac..54d03a0ce3c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -138,6 +138,10 @@
 #define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
 #define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
 
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL      PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW      0x0400
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -219,6 +223,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
 static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -270,7 +275,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
-	e1000e_get_phy_id(hw);
+	ret_val = e1000e_get_phy_id(hw);
+	if (ret_val)
+		goto out;
+	if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+		/*
+		 * In case the PHY needs to be in mdio slow mode (eg. 82577),
+		 * set slow mode and try to get the PHY id again.
+		 */
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			goto out;
+	}
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
 	switch (phy->type) {
@@ -292,6 +311,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		break;
 	}
 
+out:
 	return ret_val;
 }
 
@@ -1076,16 +1096,44 @@ out:
 
 
 /**
+ *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ *  @hw:   pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data |= HV_KMRN_MDIO_SLOW;
+
+	ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+	return ret_val;
+}
+
+/**
  *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
  *  done after every PHY reset.
  **/
 static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 {
 	s32 ret_val = 0;
+	u16 phy_data;
 
 	if (hw->mac.type != e1000_pchlan)
 		return ret_val;
 
+	/* Set MDIO slow mode before any other MDIO access */
+	if (hw->phy.type == e1000_phy_82577) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
 	if (((hw->phy.type == e1000_phy_82577) &&
 	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
 	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
@@ -1118,16 +1166,32 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 
 	hw->phy.addr = 1;
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release(hw);
 	if (ret_val)
 		goto out;
-	hw->phy.ops.release(hw);
 
 	/*
 	 * Configure the K1 Si workaround during phy reset assuming there is
 	 * link so that it disables K1 if link is in 1Gbps.
 	 */
 	ret_val = e1000_k1_gig_workaround_hv(hw, true);
+	if (ret_val)
+		goto out;
 
+	/* Workaround for link disconnects on a busy hub in half duplex */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+	ret_val = hw->phy.ops.read_reg_locked(hw,
+	                                      PHY_REG(BM_PORT_CTRL_PAGE, 17),
+	                                      &phy_data);
+	if (ret_val)
+		goto release;
+	ret_val = hw->phy.ops.write_reg_locked(hw,
+	                                       PHY_REG(BM_PORT_CTRL_PAGE, 17),
+	                                       phy_data & 0x00FF);
+release:
+	hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -1184,6 +1248,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	/* Allow time for h/w to get to a quiescent state after reset */
 	mdelay(10);
 
+	/* Perform any necessary post-reset workarounds */
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
@@ -2484,6 +2549,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	if (!ret_val)
 		e1000_release_swflag_ich8lan(hw);
 
+	/* Perform any necessary post-reset workarounds */
+	if (hw->mac.type == e1000_pchlan)
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
 	if (ctrl & E1000_CTRL_PHY_RST)
 		ret_val = hw->phy.ops.get_cfg_done(hw);
 
@@ -2528,9 +2597,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	kab |= E1000_KABGTXD_BGSQLBIAS;
 	ew32(KABGTXD, kab);
 
-	if (hw->mac.type == e1000_pchlan)
-		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
-
 out:
 	return ret_val;
 }
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3d57ca5482f..5d7a760194d 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -450,13 +450,23 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 
 		length = le16_to_cpu(rx_desc->length);
 
-		/* !EOP means multiple descriptors were used to store a single
-		 * packet, also make sure the frame isn't just CRC only */
-		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
+		/*
+		 * !EOP means multiple descriptors were used to store a single
+		 * packet, if that's the case we need to toss it.  In fact, we
+		 * need to toss every packet with the EOP bit clear and the
+		 * next frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			/* All receives must fit into a single buffer */
 			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
+			if (status & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -745,10 +755,16 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				 PCI_DMA_FROMDEVICE);
 		buffer_info->dma = 0;
 
-		if (!(staterr & E1000_RXD_STAT_EOP)) {
+		/* see !EOP comment in other rx routine */
+		if (!(staterr & E1000_RXD_STAT_EOP))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			e_dbg("Packet Split buffers didn't pick up the full "
 			      "packet\n");
 			dev_kfree_skb_irq(skb);
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -1118,6 +1134,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
+	adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 
 	writel(0, adapter->hw.hw_addr + rx_ring->head);
 	writel(0, adapter->hw.hw_addr + rx_ring->tail);
@@ -3952,13 +3969,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		e1000_put_txbuf(adapter, buffer_info);;
 	}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 55a2c0acfee..7f3ceb9dad6 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -152,32 +152,9 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
 			goto out;
 
-		/*
-		 * If the PHY ID is still unknown, we may have an 82577
-		 * without link.  We will try again after setting Slow MDIC
-		 * mode. No harm in trying again in this case since the PHY
-		 * ID is unknown at this point anyway.
-		 */
-		ret_val = phy->ops.acquire(hw);
-		if (ret_val)
-			goto out;
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-		phy->ops.release(hw);
-
 		retry_count++;
 	}
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if (retry_count) {
-		ret_val = phy->ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
-		phy->ops.release(hw);
-	}
-
 	return ret_val;
 }
 
@@ -2791,38 +2768,6 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
 }
 
 /**
- *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- *  @hw:   pointer to the HW structure
- *  @slow: true for slow mode, false for normal mode
- *
- *  Assumes semaphore already acquired.
- **/
-s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
-{
-	s32 ret_val = 0;
-	u16 data = 0;
-
-	/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
-	hw->phy.addr = 1;
-	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-				         (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
-	                                   (0x2180 | (slow << 10)));
-	if (ret_val)
-		goto out;
-
-	/* dummy read when reverting to fast mode - throw away result */
-	if (!slow)
-		ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
-out:
-	return ret_val;
-}
-
-/**
  *  __e1000_read_phy_reg_hv -  Read HV PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
@@ -2839,7 +2784,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
-	bool in_slow_mode = false;
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2847,16 +2791,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 			return ret_val;
 	}
 
-	/* Workaround failure in MDIO access while cable is disconnected */
-	if ((hw->phy.type == e1000_phy_82577) &&
-	    !(er32(STATUS) & E1000_STATUS_LU)) {
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-
-		in_slow_mode = true;
-	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -2893,10 +2827,6 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
 	                                  data);
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
 	if (!locked)
 		hw->phy.ops.release(hw);
 
@@ -2948,7 +2878,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
-	bool in_slow_mode = false;
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2956,16 +2885,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 			return ret_val;
 	}
 
-	/* Workaround failure in MDIO access while cable is disconnected */
-	if ((hw->phy.type == e1000_phy_82577) &&
-	    !(er32(STATUS) & E1000_STATUS_LU)) {
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-
-		in_slow_mode = true;
-	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -3019,10 +2938,6 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 	                                  data);
 
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
 	if (!locked)
 		hw->phy.ops.release(hw);