diff options
author | David Vrabel <david.vrabel@csr.com> | 2009-01-02 13:17:13 +0000 |
---|---|---|
committer | David Vrabel <david.vrabel@csr.com> | 2009-01-02 13:17:13 +0000 |
commit | b21a207141d83a06abc5f492b80204602e02ca44 (patch) | |
tree | f0152cde543008c72d7eb5c12c18095ad92785e6 /drivers/net/sfc/falcon.c | |
parent | 3af373021fa32f8f787bfbdcc1a9277a287bde4e (diff) | |
parent | b58602a4bac012b5f4fc12fe6b46ab237b610d5d (diff) |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
Conflicts:
drivers/uwb/wlp/eda.c
Diffstat (limited to 'drivers/net/sfc/falcon.c')
-rw-r--r-- | drivers/net/sfc/falcon.c | 480 |
1 files changed, 291 insertions, 189 deletions
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 31ed1f49de0..6884dc8c1f8 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -15,11 +15,11 @@ #include <linux/seq_file.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> +#include <linux/mii.h> #include "net_driver.h" #include "bitfield.h" #include "efx.h" #include "mac.h" -#include "gmii.h" #include "spi.h" #include "falcon.h" #include "falcon_hwdefs.h" @@ -70,6 +70,20 @@ static int disable_dma_stats; #define RX_DC_ENTRIES_ORDER 2 #define RX_DC_BASE 0x100000 +static const unsigned int +/* "Large" EEPROM device: Atmel AT25640 or similar + * 8 KB, 16-bit address, 32 B write block */ +large_eeprom_type = ((13 << SPI_DEV_TYPE_SIZE_LBN) + | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)), +/* Default flash device: Atmel AT25F1024 + * 128 KB, 24-bit address, 32 KB erase block, 256 B write block */ +default_flash_type = ((17 << SPI_DEV_TYPE_SIZE_LBN) + | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) + | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) + | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)); + /* RX FIFO XOFF watermark * * When the amount of the RX FIFO increases used increases past this @@ -770,15 +784,18 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_buf_owner_id_err | rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err); - /* Count errors that are not in MAC stats. */ + /* Count errors that are not in MAC stats. Ignore expected + * checksum errors during self-test. */ if (rx_ev_frm_trunc) ++rx_queue->channel->n_rx_frm_trunc; else if (rx_ev_tobe_disc) ++rx_queue->channel->n_rx_tobe_disc; - else if (rx_ev_ip_hdr_chksum_err) - ++rx_queue->channel->n_rx_ip_hdr_chksum_err; - else if (rx_ev_tcp_udp_chksum_err) - ++rx_queue->channel->n_rx_tcp_udp_chksum_err; + else if (!efx->loopback_selftest) { + if (rx_ev_ip_hdr_chksum_err) + ++rx_queue->channel->n_rx_ip_hdr_chksum_err; + else if (rx_ev_tcp_udp_chksum_err) + ++rx_queue->channel->n_rx_tcp_udp_chksum_err; + } if (rx_ev_ip_frag_err) ++rx_queue->channel->n_rx_ip_frag_err; @@ -809,7 +826,7 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, #endif if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && - efx->phy_type == PHY_TYPE_10XPRESS)) + efx->phy_type == PHY_TYPE_SFX7101)) tenxpress_crc_err(efx); } @@ -893,22 +910,20 @@ static void falcon_handle_global_event(struct efx_channel *channel, efx_qword_t *event) { struct efx_nic *efx = channel->efx; - bool is_phy_event = false, handled = false; + bool handled = false; - /* Check for interrupt on either port. Some boards have a - * single PHY wired to the interrupt line for port 1. */ if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) || EFX_QWORD_FIELD(*event, G_PHY1_INTR) || - EFX_QWORD_FIELD(*event, XG_PHY_INTR)) - is_phy_event = true; + EFX_QWORD_FIELD(*event, XG_PHY_INTR) || + EFX_QWORD_FIELD(*event, XFP_PHY_INTR)) { + efx->phy_op->clear_interrupt(efx); + queue_work(efx->workqueue, &efx->phy_work); + handled = true; + } if ((falcon_rev(efx) >= FALCON_REV_B0) && - EFX_QWORD_FIELD(*event, XG_MNT_INTR_B0)) - is_phy_event = true; - - if (is_phy_event) { - efx->phy_op->clear_interrupt(efx); - queue_work(efx->workqueue, &efx->reconfigure_work); + EFX_QWORD_FIELD(*event, XG_MNT_INTR_B0)) { + queue_work(efx->workqueue, &efx->mac_work); handled = true; } @@ -1151,6 +1166,19 @@ void falcon_generate_test_event(struct efx_channel *channel, unsigned int magic) falcon_generate_event(channel, &test_event); } +void falcon_sim_phy_event(struct efx_nic *efx) +{ + efx_qword_t phy_event; + + EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE); + if (EFX_IS10G(efx)) + EFX_SET_OWORD_FIELD(phy_event, XG_PHY_INTR, 1); + else + EFX_SET_OWORD_FIELD(phy_event, G_PHY0_INTR, 1); + + falcon_generate_event(&efx->channel[0], &phy_event); +} + /************************************************************************** * * Flush handling @@ -1560,7 +1588,7 @@ int falcon_init_interrupt(struct efx_nic *efx) efx_for_each_channel(channel, efx) { rc = request_irq(channel->irq, falcon_msi_interrupt, IRQF_PROBE_SHARED, /* Not shared */ - efx->name, channel); + channel->name, channel); if (rc) { EFX_ERR(efx, "failed to hook IRQ %d\n", channel->irq); goto fail2; @@ -1605,32 +1633,45 @@ void falcon_fini_interrupt(struct efx_nic *efx) ************************************************************************** */ -#define FALCON_SPI_MAX_LEN ((unsigned) sizeof(efx_oword_t)) +#define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) + +static int falcon_spi_poll(struct efx_nic *efx) +{ + efx_oword_t reg; + falcon_read(efx, ®, EE_SPI_HCMD_REG_KER); + return EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0; +} /* Wait for SPI command completion */ static int falcon_spi_wait(struct efx_nic *efx) { - unsigned long timeout = jiffies + DIV_ROUND_UP(HZ, 10); - efx_oword_t reg; - bool cmd_en, timer_active; + /* Most commands will finish quickly, so we start polling at + * very short intervals. Sometimes the command may have to + * wait for VPD or expansion ROM access outside of our + * control, so we allow up to 100 ms. */ + unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 10); + int i; + + for (i = 0; i < 10; i++) { + if (!falcon_spi_poll(efx)) + return 0; + udelay(10); + } for (;;) { - falcon_read(efx, ®, EE_SPI_HCMD_REG_KER); - cmd_en = EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN); - timer_active = EFX_OWORD_FIELD(reg, EE_WR_TIMER_ACTIVE); - if (!cmd_en && !timer_active) + if (!falcon_spi_poll(efx)) return 0; if (time_after_eq(jiffies, timeout)) { EFX_ERR(efx, "timed out waiting for SPI\n"); return -ETIMEDOUT; } - cpu_relax(); + schedule_timeout_uninterruptible(1); } } -static int falcon_spi_cmd(const struct efx_spi_device *spi, - unsigned int command, int address, - const void *in, void *out, unsigned int len) +int falcon_spi_cmd(const struct efx_spi_device *spi, + unsigned int command, int address, + const void *in, void *out, size_t len) { struct efx_nic *efx = spi->efx; bool addressed = (address >= 0); @@ -1641,9 +1682,10 @@ static int falcon_spi_cmd(const struct efx_spi_device *spi, /* Input validation */ if (len > FALCON_SPI_MAX_LEN) return -EINVAL; + BUG_ON(!mutex_is_locked(&efx->spi_lock)); - /* Check SPI not currently being accessed */ - rc = falcon_spi_wait(efx); + /* Check that previous command is not still running */ + rc = falcon_spi_poll(efx); if (rc) return rc; @@ -1685,8 +1727,8 @@ static int falcon_spi_cmd(const struct efx_spi_device *spi, return 0; } -static unsigned int -falcon_spi_write_limit(const struct efx_spi_device *spi, unsigned int start) +static size_t +falcon_spi_write_limit(const struct efx_spi_device *spi, size_t start) { return min(FALCON_SPI_MAX_LEN, (spi->block_size - (start & (spi->block_size - 1)))); @@ -1699,38 +1741,40 @@ efx_spi_munge_command(const struct efx_spi_device *spi, return command | (((address >> 8) & spi->munge_address) << 3); } - -static int falcon_spi_fast_wait(const struct efx_spi_device *spi) +/* Wait up to 10 ms for buffered write completion */ +int falcon_spi_wait_write(const struct efx_spi_device *spi) { + struct efx_nic *efx = spi->efx; + unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100); u8 status; - int i, rc; - - /* Wait up to 1000us for flash/EEPROM to finish a fast operation. */ - for (i = 0; i < 50; i++) { - udelay(20); + int rc; + for (;;) { rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL, &status, sizeof(status)); if (rc) return rc; if (!(status & SPI_STATUS_NRDY)) return 0; + if (time_after_eq(jiffies, timeout)) { + EFX_ERR(efx, "SPI write timeout on device %d" + " last status=0x%02x\n", + spi->device_id, status); + return -ETIMEDOUT; + } + schedule_timeout_uninterruptible(1); } - EFX_ERR(spi->efx, - "timed out waiting for device %d last status=0x%02x\n", - spi->device_id, status); - return -ETIMEDOUT; } int falcon_spi_read(const struct efx_spi_device *spi, loff_t start, size_t len, size_t *retlen, u8 *buffer) { - unsigned int command, block_len, pos = 0; + size_t block_len, pos = 0; + unsigned int command; int rc = 0; while (pos < len) { - block_len = min((unsigned int)len - pos, - FALCON_SPI_MAX_LEN); + block_len = min(len - pos, FALCON_SPI_MAX_LEN); command = efx_spi_munge_command(spi, SPI_READ, start + pos); rc = falcon_spi_cmd(spi, command, start + pos, NULL, @@ -1756,7 +1800,8 @@ int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, size_t len, size_t *retlen, const u8 *buffer) { u8 verify_buffer[FALCON_SPI_MAX_LEN]; - unsigned int command, block_len, pos = 0; + size_t block_len, pos = 0; + unsigned int command; int rc = 0; while (pos < len) { @@ -1764,7 +1809,7 @@ int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, if (rc) break; - block_len = min((unsigned int)len - pos, + block_len = min(len - pos, falcon_spi_write_limit(spi, start + pos)); command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); rc = falcon_spi_cmd(spi, command, start + pos, @@ -1772,7 +1817,7 @@ int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, if (rc) break; - rc = falcon_spi_fast_wait(spi); + rc = falcon_spi_wait_write(spi); if (rc) break; @@ -1805,40 +1850,61 @@ int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, * ************************************************************************** */ -void falcon_drain_tx_fifo(struct efx_nic *efx) + +static int falcon_reset_macs(struct efx_nic *efx) { - efx_oword_t temp; + efx_oword_t reg; int count; - if ((falcon_rev(efx) < FALCON_REV_B0) || - (efx->loopback_mode != LOOPBACK_NONE)) - return; + if (falcon_rev(efx) < FALCON_REV_B0) { + /* It's not safe to use GLB_CTL_REG to reset the + * macs, so instead use the internal MAC resets + */ + if (!EFX_IS10G(efx)) { + EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 1); + falcon_write(efx, ®, GM_CFG1_REG); + udelay(1000); + + EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 0); + falcon_write(efx, ®, GM_CFG1_REG); + udelay(1000); + return 0; + } else { + EFX_POPULATE_OWORD_1(reg, XM_CORE_RST, 1); + falcon_write(efx, ®, XM_GLB_CFG_REG); + + for (count = 0; count < 10000; count++) { + falcon_read(efx, ®, XM_GLB_CFG_REG); + if (EFX_OWORD_FIELD(reg, XM_CORE_RST) == 0) + return 0; + udelay(10); + } - falcon_read(efx, &temp, MAC0_CTRL_REG_KER); - /* There is no point in draining more than once */ - if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0)) - return; + EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); + return -ETIMEDOUT; + } + } /* MAC stats will fail whilst the TX fifo is draining. Serialise * the drain sequence with the statistics fetch */ spin_lock(&efx->stats_lock); - EFX_SET_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0, 1); - falcon_write(efx, &temp, MAC0_CTRL_REG_KER); + falcon_read(efx, ®, MAC0_CTRL_REG_KER); + EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1); + falcon_write(efx, ®, MAC0_CTRL_REG_KER); - /* Reset the MAC and EM block. */ - falcon_read(efx, &temp, GLB_CTL_REG_KER); - EFX_SET_OWORD_FIELD(temp, RST_XGTX, 1); - EFX_SET_OWORD_FIELD(temp, RST_XGRX, 1); - EFX_SET_OWORD_FIELD(temp, RST_EM, 1); - falcon_write(efx, &temp, GLB_CTL_REG_KER); + falcon_read(efx, ®, GLB_CTL_REG_KER); + EFX_SET_OWORD_FIELD(reg, RST_XGTX, 1); + EFX_SET_OWORD_FIELD(reg, RST_XGRX, 1); + EFX_SET_OWORD_FIELD(reg, RST_EM, 1); + falcon_write(efx, ®, GLB_CTL_REG_KER); count = 0; while (1) { - falcon_read(efx, &temp, GLB_CTL_REG_KER); - if (!EFX_OWORD_FIELD(temp, RST_XGTX) && - !EFX_OWORD_FIELD(temp, RST_XGRX) && - !EFX_OWORD_FIELD(temp, RST_EM)) { + falcon_read(efx, ®, GLB_CTL_REG_KER); + if (!EFX_OWORD_FIELD(reg, RST_XGTX) && + !EFX_OWORD_FIELD(reg, RST_XGRX) && + !EFX_OWORD_FIELD(reg, RST_EM)) { EFX_LOG(efx, "Completed MAC reset after %d loops\n", count); break; @@ -1855,21 +1921,39 @@ void falcon_drain_tx_fifo(struct efx_nic *efx) /* If we've reset the EM block and the link is up, then * we'll have to kick the XAUI link so the PHY can recover */ - if (efx->link_up && EFX_WORKAROUND_5147(efx)) + if (efx->link_up && EFX_IS10G(efx) && EFX_WORKAROUND_5147(efx)) falcon_reset_xaui(efx); + + return 0; +} + +void falcon_drain_tx_fifo(struct efx_nic *efx) +{ + efx_oword_t reg; + + if ((falcon_rev(efx) < FALCON_REV_B0) || + (efx->loopback_mode != LOOPBACK_NONE)) + return; + + falcon_read(efx, ®, MAC0_CTRL_REG_KER); + /* There is no point in draining more than once */ + if (EFX_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0)) + return; + + falcon_reset_macs(efx); } void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) { - efx_oword_t temp; + efx_oword_t reg; if (falcon_rev(efx) < FALCON_REV_B0) return; /* Isolate the MAC -> RX */ - falcon_read(efx, &temp, RX_CFG_REG_KER); - EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 0); - falcon_write(efx, &temp, RX_CFG_REG_KER); + falcon_read(efx, ®, RX_CFG_REG_KER); + EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 0); + falcon_write(efx, ®, RX_CFG_REG_KER); if (!efx->link_up) falcon_drain_tx_fifo(efx); @@ -1881,14 +1965,12 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) int link_speed; bool tx_fc; - if (efx->link_options & GM_LPA_10000) - link_speed = 0x3; - else if (efx->link_options & GM_LPA_1000) - link_speed = 0x2; - else if (efx->link_options & GM_LPA_100) - link_speed = 0x1; - else - link_speed = 0x0; + switch (efx->link_speed) { + case 10000: link_speed = 3; break; + case 1000: link_speed = 2; break; + case 100: link_speed = 1; break; + default: link_speed = 0; break; + } /* MAC_LINK_STATUS controls MAC backpressure but doesn't work * as advertised. Disable to ensure packets are not * indefinitely held and TX queue can be flushed at any point @@ -1914,7 +1996,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) /* Transmission of pause frames when RX crosses the threshold is * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL. * Action on receipt of pause frames is controller by XM_DIS_FCNTL */ - tx_fc = !!(efx->flow_control & EFX_FC_TX); + tx_fc = !!(efx->link_fc & EFX_FC_TX); falcon_read(efx, ®, RX_CFG_REG_KER); EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); @@ -1998,7 +2080,8 @@ static int falcon_gmii_wait(struct efx_nic *efx) efx_dword_t md_stat; int count; - for (count = 0; count < 1000; count++) { /* wait upto 10ms */ + /* wait upto 50ms - taken max from datasheet */ + for (count = 0; count < 5000; count++) { falcon_readl(efx, &md_stat, MD_STAT_REG_KER); if (EFX_DWORD_FIELD(md_stat, MD_BSY) == 0) { if (EFX_DWORD_FIELD(md_stat, MD_LNFL) != 0 || @@ -2162,10 +2245,14 @@ static void falcon_init_mdio(struct mii_if_info *gmii) static int falcon_probe_phy(struct efx_nic *efx) { switch (efx->phy_type) { - case PHY_TYPE_10XPRESS: - efx->phy_op = &falcon_tenxpress_phy_ops; + case PHY_TYPE_SFX7101: + efx->phy_op = &falcon_sfx7101_phy_ops; + break; + case PHY_TYPE_SFT9001A: + case PHY_TYPE_SFT9001B: + efx->phy_op = &falcon_sft9001_phy_ops; break; - case PHY_TYPE_XFP: + case PHY_TYPE_QT2022C2: efx->phy_op = &falcon_xfp_phy_ops; break; default: @@ -2174,10 +2261,59 @@ static int falcon_probe_phy(struct efx_nic *efx) return -1; } - efx->loopback_modes = LOOPBACKS_10G_INTERNAL | efx->phy_op->loopbacks; + if (efx->phy_op->macs & EFX_XMAC) + efx->loopback_modes |= ((1 << LOOPBACK_XGMII) | + (1 << LOOPBACK_XGXS) | + (1 << LOOPBACK_XAUI)); + if (efx->phy_op->macs & EFX_GMAC) + efx->loopback_modes |= (1 << LOOPBACK_GMAC); + efx->loopback_modes |= efx->phy_op->loopbacks; + return 0; } +int falcon_switch_mac(struct efx_nic *efx) +{ + struct efx_mac_operations *old_mac_op = efx->mac_op; + efx_oword_t nic_stat; + unsigned strap_val; + + /* Internal loopbacks override the phy speed setting */ + if (efx->loopback_mode == LOOPBACK_GMAC) { + efx->link_speed = 1000; + efx->link_fd = true; + } else if (LOOPBACK_INTERNAL(efx)) { + efx->link_speed = 10000; + efx->link_fd = true; + } + + efx->mac_op = (EFX_IS10G(efx) ? + &falcon_xmac_operations : &falcon_gmac_operations); + if (old_mac_op == efx->mac_op) + return 0; + + WARN_ON(!mutex_is_locked(&efx->mac_lock)); + + /* Not all macs support a mac-level link state */ + efx->mac_up = true; + + falcon_read(efx, &nic_stat, NIC_STAT_REG); + strap_val = EFX_IS10G(efx) ? 5 : 3; + if (falcon_rev(efx) >= FALCON_REV_B0) { + EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_EN, 1); + EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_OVR, strap_val); + falcon_write(efx, &nic_stat, NIC_STAT_REG); + } else { + /* Falcon A1 does not support 1G/10G speed switching + * and must not be used with a PHY that does. */ + BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val); + } + + + EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); + return falcon_reset_macs(efx); +} + /* This call is responsible for hooking in the MAC and PHY operations */ int falcon_probe_port(struct efx_nic *efx) { @@ -2194,9 +2330,9 @@ int falcon_probe_port(struct efx_nic *efx) /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ if (falcon_rev(efx) >= FALCON_REV_B0) - efx->flow_control = EFX_FC_RX | EFX_FC_TX; + efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; else - efx->flow_control = EFX_FC_RX; + efx->wanted_fc = EFX_FC_RX; /* Allocate buffer for stats */ rc = falcon_alloc_buffer(efx, &efx->stats_buffer, @@ -2253,13 +2389,18 @@ int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) __le16 *word, *limit; u32 csum; - region = kmalloc(NVCONFIG_END, GFP_KERNEL); + spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; + if (!spi) + return -EINVAL; + + region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL); if (!region) return -ENOMEM; nvconfig = region + NVCONFIG_OFFSET; - spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; - rc = falcon_spi_read(spi, 0, NVCONFIG_END, NULL, region); + mutex_lock(&efx->spi_lock); + rc = falcon_spi_read(spi, 0, FALCON_NVCONFIG_END, NULL, region); + mutex_unlock(&efx->spi_lock); if (rc) { EFX_ERR(efx, "Failed to read %s\n", efx->spi_flash ? "flash" : "EEPROM"); @@ -2283,7 +2424,7 @@ int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) limit = (__le16 *) (nvconfig + 1); } else { word = region; - limit = region + NVCONFIG_END; + limit = region + FALCON_NVCONFIG_END; } for (csum = 0; word < limit; ++word) csum += le16_to_cpu(*word); @@ -2325,6 +2466,10 @@ static struct { EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, { DP_CTRL_REG, EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, + { GM_CFG2_REG, + EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) }, + { GMF_CFG0_REG, + EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) }, { XM_GLB_CFG_REG, EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, { XM_TX_CFG_REG, @@ -2545,7 +2690,7 @@ static int falcon_spi_device_init(struct efx_nic *efx, struct efx_spi_device *spi_device; if (device_type != 0) { - spi_device = kmalloc(sizeof(*spi_device), GFP_KERNEL); + spi_device = kzalloc(sizeof(*spi_device), GFP_KERNEL); if (!spi_device) return -ENOMEM; spi_device->device_id = device_id; @@ -2555,6 +2700,11 @@ static int falcon_spi_device_init(struct efx_nic *efx, SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); spi_device->munge_address = (spi_device->size == 1 << 9 && spi_device->addr_len == 1); + spi_device->erase_command = + SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ERASE_CMD); + spi_device->erase_size = + 1 << SPI_DEV_TYPE_FIELD(device_type, + SPI_DEV_TYPE_ERASE_SIZE); spi_device->block_size = 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_BLOCK_SIZE); @@ -2645,6 +2795,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx) static int falcon_probe_nic_variant(struct efx_nic *efx) { efx_oword_t altera_build; + efx_oword_t nic_stat; falcon_read(efx, &altera_build, ALTERA_BUILD_REG_KER); if (EFX_OWORD_FIELD(altera_build, VER_ALL)) { @@ -2652,27 +2803,20 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return -ENODEV; } + falcon_read(efx, &nic_stat, NIC_STAT_REG); + switch (falcon_rev(efx)) { case FALCON_REV_A0: case 0xff: EFX_ERR(efx, "Falcon rev A0 not supported\n"); return -ENODEV; - case FALCON_REV_A1:{ - efx_oword_t nic_stat; - - falcon_read(efx, &nic_stat, NIC_STAT_REG); - + case FALCON_REV_A1: if (EFX_OWORD_FIELD(nic_stat, STRAP_PCIE) == 0) { EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n"); return -ENODEV; } - if (!EFX_OWORD_FIELD(nic_stat, STRAP_10G)) { - EFX_ERR(efx, "1G mode not supported\n"); - return -ENODEV; - } break; - } case FALCON_REV_B0: break; @@ -2682,6 +2826,9 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return -ENODEV; } + /* Initial assumed speed */ + efx->link_speed = EFX_OWORD_FIELD(nic_stat, STRAP_10G) ? 10000 : 1000; + return 0; } @@ -2689,80 +2836,37 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) static void falcon_probe_spi_devices(struct efx_nic *efx) { efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; - bool has_flash, has_eeprom, boot_is_external; + int boot_dev; falcon_read(efx, &gpio_ctl, GPIO_CTL_REG_KER); falcon_read(efx, &nic_stat, NIC_STAT_REG); falcon_read(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); - has_flash = EFX_OWORD_FIELD(nic_stat, SF_PRST); - has_eeprom = EFX_OWORD_FIELD(nic_stat, EE_PRST); - boot_is_external = EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE); - - if (has_flash) { - /* Default flash SPI device: Atmel AT25F1024 - * 128 KB, 24-bit address, 32 KB erase block, - * 256 B write block - */ - u32 flash_device_type = - (17 << SPI_DEV_TYPE_SIZE_LBN) - | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) - | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) - | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) - | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); - - falcon_spi_device_init(efx, &efx->spi_flash, - EE_SPI_FLASH, flash_device_type); - - if (!boot_is_external) { - /* Disable VPD and set clock dividers to safe - * values for initial programming. - */ - EFX_LOG(efx, "Booted from internal ASIC settings;" - " setting SPI config\n"); - EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0, - /* 125 MHz / 7 ~= 20 MHz */ - EE_SF_CLOCK_DIV, 7, - /* 125 MHz / 63 ~= 2 MHz */ - EE_EE_CLOCK_DIV, 63); - falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); - } - } - - if (has_eeprom) { - u32 eeprom_device_type; - - /* If it has no flash, it must have a large EEPROM - * for chip config; otherwise check whether 9-bit - * addressing is used for VPD configuration - */ - if (has_flash && - (!boot_is_external || - EFX_OWORD_FIELD(ee_vpd_cfg, EE_VPD_EN_AD9_MODE))) { - /* Default SPI device: Atmel AT25040 or similar - * 512 B, 9-bit address, 8 B write block - */ - eeprom_device_type = - (9 << SPI_DEV_TYPE_SIZE_LBN) - | (1 << SPI_DEV_TYPE_ADDR_LEN_LBN) - | (3 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); - } else { - /* "Large" SPI device: Atmel AT25640 or similar - * 8 KB, 16-bit address, 32 B write block - */ - eeprom_device_type = - (13 << SPI_DEV_TYPE_SIZE_LBN) - | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) - | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); - } - - falcon_spi_device_init(efx, &efx->spi_eeprom, - EE_SPI_EEPROM, eeprom_device_type); - } - - EFX_LOG(efx, "flash is %s, EEPROM is %s\n", - (has_flash ? "present" : "absent"), - (has_eeprom ? "present" : "absent")); + if (EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE)) { + boot_dev = (EFX_OWORD_FIELD(nic_stat, SF_PRST) ? + EE_SPI_FLASH : EE_SPI_EEPROM); + EFX_LOG(efx, "Booted from %s\n", + boot_dev == EE_SPI_FLASH ? "flash" : "EEPROM"); + } else { + /* Disable VPD and set clock dividers to safe + * values for initial programming. */ + boot_dev = -1; + EFX_LOG(efx, "Booted from internal ASIC settings;" + " setting SPI config\n"); + EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0, + /* 125 MHz / 7 ~= 20 MHz */ + EE_SF_CLOCK_DIV, 7, + /* 125 MHz / 63 ~= 2 MHz */ + EE_EE_CLOCK_DIV, 63); + falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); + } + + if (boot_dev == EE_SPI_FLASH) + falcon_spi_device_init(efx, &efx->spi_flash, EE_SPI_FLASH, + default_flash_type); + if (boot_dev == EE_SPI_EEPROM) + falcon_spi_device_init(efx, &efx->spi_eeprom, EE_SPI_EEPROM, + large_eeprom_type); } int falcon_probe_nic(struct efx_nic *efx) @@ -2825,10 +2929,10 @@ int falcon_probe_nic(struct efx_nic *efx) goto fail5; /* Initialise I2C adapter */ - efx->i2c_adap.owner = THIS_MODULE; + efx->i2c_adap.owner = THIS_MODULE; nic_data->i2c_data = falcon_i2c_bit_operations; nic_data->i2c_data.data = efx; - efx->i2c_adap.algo_data = &nic_data->i2c_data; + efx->i2c_adap.algo_data = &nic_data->i2c_data; efx->i2c_adap.dev.parent = &efx->pci_dev->dev; strlcpy(efx->i2c_adap.name, "SFC4000 GPIO", sizeof(efx->i2c_adap.name)); rc = i2c_bit_add_bus(&efx->i2c_adap); @@ -2862,20 +2966,18 @@ int falcon_init_nic(struct efx_nic *efx) unsigned thresh; int rc; - /* Set up the address region register. This is only needed - * for the B0 FPGA, but since we are just pushing in the - * reset defaults this may as well be unconditional. */ - EFX_POPULATE_OWORD_4(temp, ADR_REGION0, 0, - ADR_REGION1, (1 << 16), - ADR_REGION2, (2 << 16), - ADR_REGION3, (3 << 16)); - falcon_write(efx, &temp, ADR_REGION_REG_KER); - /* Use on-chip SRAM */ falcon_read(efx, &temp, NIC_STAT_REG); EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1); falcon_write(efx, &temp, NIC_STAT_REG); + /* Set the source of the GMAC clock */ + if (falcon_rev(efx) == FALCON_REV_B0) { + falcon_read(efx, &temp, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(temp, GPIO_USE_NIC_CLK, true); + falcon_write(efx, &temp, GPIO_CTL_REG_KER); + } + /* Set buffer table mode */ EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL); falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER); |