sfc: Rename 'xfp' file and functions to reflect reality

The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs,
covering both more and less than XFP.  Rename its functions and
constants to reflect reality and to reduce namespace pollution when
sfc is a built-in driver.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 250 insertions, 0 deletions

diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
new file mode 100644
index 00000000000..560eb18280e
--- /dev/null
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -0,0 +1,250 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+/*
+ * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
+ */
+
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include "efx.h"
+#include "mdio_10g.h"
+#include "phy.h"
+#include "falcon.h"
+
+#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS |		\
+			      MDIO_DEVS_PMAPMD |	\
+			      MDIO_DEVS_PHYXS)
+
+#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
+			  (1 << LOOPBACK_PMAPMD) |	\
+			  (1 << LOOPBACK_NETWORK))
+
+/****************************************************************************/
+/* Quake-specific MDIO registers */
+#define MDIO_QUAKE_LED0_REG	(0xD006)
+
+/* QT2025C only */
+#define PCS_FW_HEARTBEAT_REG	0xd7ee
+#define PCS_FW_HEARTB_LBN	0
+#define PCS_FW_HEARTB_WIDTH	8
+#define PCS_UC8051_STATUS_REG	0xd7fd
+#define PCS_UC_STATUS_LBN	0
+#define PCS_UC_STATUS_WIDTH	8
+#define PCS_UC_STATUS_FW_SAVE	0x20
+#define PMA_PMD_FTX_CTRL2_REG	0xc309
+#define PMA_PMD_FTX_STATIC_LBN	13
+#define PMA_PMD_VEND1_REG	0xc001
+#define PMA_PMD_VEND1_LBTXD_LBN	15
+#define PCS_VEND1_REG	   	0xc000
+#define PCS_VEND1_LBTXD_LBN	5
+
+void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
+{
+	int addr = MDIO_QUAKE_LED0_REG + led;
+	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
+}
+
+struct qt202x_phy_data {
+	enum efx_phy_mode phy_mode;
+};
+
+#define QT2022C2_MAX_RESET_TIME 500
+#define QT2022C2_RESET_WAIT 10
+
+static int qt2025c_wait_reset(struct efx_nic *efx)
+{
+	unsigned long timeout = jiffies + 10 * HZ;
+	int reg, old_counter = 0;
+
+	/* Wait for firmware heartbeat to start */
+	for (;;) {
+		int counter;
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
+		if (reg < 0)
+			return reg;
+		counter = ((reg >> PCS_FW_HEARTB_LBN) &
+			    ((1 << PCS_FW_HEARTB_WIDTH) - 1));
+		if (old_counter == 0)
+			old_counter = counter;
+		else if (counter != old_counter)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		msleep(10);
+	}
+
+	/* Wait for firmware status to look good */
+	for (;;) {
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
+		if (reg < 0)
+			return reg;
+		if ((reg &
+		     ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
+		    PCS_UC_STATUS_FW_SAVE)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		msleep(100);
+	}
+
+	return 0;
+}
+
+static int qt202x_reset_phy(struct efx_nic *efx)
+{
+	int rc;
+
+	if (efx->phy_type == PHY_TYPE_QT2025C) {
+		/* Wait for the reset triggered by falcon_reset_hw()
+		 * to complete */
+		rc = qt2025c_wait_reset(efx);
+		if (rc < 0)
+			goto fail;
+	} else {
+		/* Reset the PHYXS MMD. This is documented as doing
+		 * a complete soft reset. */
+		rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+					QT2022C2_MAX_RESET_TIME /
+					QT2022C2_RESET_WAIT,
+					QT2022C2_RESET_WAIT);
+		if (rc < 0)
+			goto fail;
+	}
+
+	/* Wait 250ms for the PHY to complete bootup */
+	msleep(250);
+
+	/* Check that all the MMDs we expect are present and responding. We
+	 * expect faults on some if the link is down, but not on the PHY XS */
+	rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
+	if (rc < 0)
+		goto fail;
+
+	efx->board_info.init_leds(efx);
+
+	return rc;
+
+ fail:
+	EFX_ERR(efx, "PHY reset timed out\n");
+	return rc;
+}
+
+static int qt202x_phy_init(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data;
+	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
+	int rc;
+
+	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
+
+	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
+		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
+		 efx_mdio_id_rev(devid));
+
+	phy_data->phy_mode = efx->phy_mode;
+
+	rc = qt202x_reset_phy(efx);
+
+	EFX_INFO(efx, "PHY init %s.\n",
+		 rc ? "failed" : "successful");
+	if (rc < 0)
+		goto fail;
+
+	return 0;
+
+ fail:
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+	return rc;
+}
+
+static void qt202x_phy_clear_interrupt(struct efx_nic *efx)
+{
+	/* Read to clear link status alarm */
+	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
+}
+
+static int qt202x_link_ok(struct efx_nic *efx)
+{
+	return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
+}
+
+static void qt202x_phy_poll(struct efx_nic *efx)
+{
+	int link_up = qt202x_link_ok(efx);
+	/* Simulate a PHY event if link state has changed */
+	if (link_up != efx->link_up)
+		falcon_sim_phy_event(efx);
+}
+
+static void qt202x_phy_reconfigure(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data = efx->phy_data;
+
+	if (efx->phy_type == PHY_TYPE_QT2025C) {
+		/* There are several different register bits which can
+		 * disable TX (and save power) on direct-attach cables
+		 * or optical transceivers, varying somewhat between
+		 * firmware versions.  Only 'static mode' appears to
+		 * cover everything. */
+		mdio_set_flag(
+			&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
+			PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
+			efx->phy_mode & PHY_MODE_TX_DISABLED ||
+			efx->phy_mode & PHY_MODE_LOW_POWER ||
+			efx->loopback_mode == LOOPBACK_PCS ||
+			efx->loopback_mode == LOOPBACK_PMAPMD);
+	} else {
+		/* Reset the PHY when moving from tx off to tx on */
+		if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
+		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
+			qt202x_reset_phy(efx);
+
+		efx_mdio_transmit_disable(efx);
+	}
+
+	efx_mdio_phy_reconfigure(efx);
+
+	phy_data->phy_mode = efx->phy_mode;
+	efx->link_up = qt202x_link_ok(efx);
+	efx->link_speed = 10000;
+	efx->link_fd = true;
+	efx->link_fc = efx->wanted_fc;
+}
+
+static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset(&efx->mdio, ecmd);
+}
+
+static void qt202x_phy_fini(struct efx_nic *efx)
+{
+	/* Clobber the LED if it was blinking */
+	efx->board_info.blink(efx, false);
+
+	/* Free the context block */
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+}
+
+struct efx_phy_operations falcon_qt202x_phy_ops = {
+	.macs		 = EFX_XMAC,
+	.init		 = qt202x_phy_init,
+	.reconfigure	 = qt202x_phy_reconfigure,
+	.poll	     	 = qt202x_phy_poll,
+	.fini	  	 = qt202x_phy_fini,
+	.clear_interrupt = qt202x_phy_clear_interrupt,
+	.get_settings	 = qt202x_phy_get_settings,
+	.set_settings	 = efx_mdio_set_settings,
+	.mmds            = QT202X_REQUIRED_DEVS,
+	.loopbacks       = QT202X_LOOPBACKS,
+};