diff options
author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2005-07-28 09:30:20 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2005-07-28 09:30:20 +0100 |
commit | 661299d9d0437a0ff72240f3d60016ac3a361a6e (patch) | |
tree | 765512576314fc3612b503f182b9ae4e60fcf849 /drivers/net | |
parent | 05caac585f8abd6c0113856bc8858e3ef214d8a6 (diff) | |
parent | 41c018b7ecb60b1c2c4d5dee0cd37d32a94c45af (diff) |
Merge with Linus' 2.6 tree
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/3c505.c | 2 | ||||
-rw-r--r-- | drivers/net/8139too.c | 6 | ||||
-rw-r--r-- | drivers/net/Kconfig | 38 | ||||
-rwxr-xr-x | drivers/net/amd8111e.c | 2 | ||||
-rw-r--r-- | drivers/net/ne.c | 4 | ||||
-rw-r--r-- | drivers/net/plip.c | 29 | ||||
-rw-r--r-- | drivers/net/via-velocity.h | 4 | ||||
-rw-r--r-- | drivers/net/wireless/airo.c | 2 |
8 files changed, 42 insertions, 45 deletions
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c index ad17f17e8e7..111601ca4ca 100644 --- a/drivers/net/3c505.c +++ b/drivers/net/3c505.c @@ -272,7 +272,7 @@ static inline void set_hsf(struct net_device *dev, int hsf) static int start_receive(struct net_device *, pcb_struct *); -inline static void adapter_reset(struct net_device *dev) +static inline void adapter_reset(struct net_device *dev) { unsigned long timeout; elp_device *adapter = dev->priv; diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 5a4a08a7c95..4c2cf7bbd25 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -126,14 +126,14 @@ #define USE_IO_OPS 1 #endif -/* define to 1 to enable copious debugging info */ -#undef RTL8139_DEBUG +/* define to 1, 2 or 3 to enable copious debugging info */ +#define RTL8139_DEBUG 0 /* define to 1 to disable lightweight runtime debugging checks */ #undef RTL8139_NDEBUG -#ifdef RTL8139_DEBUG +#if RTL8139_DEBUG /* note: prints function name for you */ # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args) #else diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 534b598866b..8a835eb5880 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -23,9 +23,12 @@ config NETDEVICES If unsure, say Y. +# All the following symbols are dependent on NETDEVICES - do not repeat +# that for each of the symbols. +if NETDEVICES + config DUMMY tristate "Dummy net driver support" - depends on NETDEVICES ---help--- This is essentially a bit-bucket device (i.e. traffic you send to this device is consigned into oblivion) with a configurable IP @@ -45,7 +48,6 @@ config DUMMY config BONDING tristate "Bonding driver support" - depends on NETDEVICES depends on INET ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet @@ -63,7 +65,6 @@ config BONDING config EQUALIZER tristate "EQL (serial line load balancing) support" - depends on NETDEVICES ---help--- If you have two serial connections to some other computer (this usually requires two modems and two telephone lines) and you use @@ -83,7 +84,6 @@ config EQUALIZER config TUN tristate "Universal TUN/TAP device driver support" - depends on NETDEVICES select CRC32 ---help--- TUN/TAP provides packet reception and transmission for user space @@ -107,7 +107,7 @@ config TUN config NET_SB1000 tristate "General Instruments Surfboard 1000" - depends on NETDEVICES && PNP + depends on PNP ---help--- This is a driver for the General Instrument (also known as NextLevel) SURFboard 1000 internal @@ -129,16 +129,14 @@ config NET_SB1000 If you don't have this card, of course say N. -if NETDEVICES source "drivers/net/arcnet/Kconfig" -endif # # Ethernet # menu "Ethernet (10 or 100Mbit)" - depends on NETDEVICES && !UML + depends on !UML config NET_ETHERNET bool "Ethernet (10 or 100Mbit)" @@ -1137,7 +1135,7 @@ config IBMLANA config IBMVETH tristate "IBM LAN Virtual Ethernet support" - depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES + depends on NET_ETHERNET && PPC_PSERIES ---help--- This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -1760,7 +1758,7 @@ endmenu # menu "Ethernet (1000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config ACENIC tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" @@ -2091,7 +2089,7 @@ endmenu # menu "Ethernet (10000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig" config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" - depends on NETDEVICES && PPC_ISERIES + depends on PPC_ISERIES config FDDI bool "FDDI driver support" - depends on NETDEVICES && (PCI || EISA) + depends on (PCI || EISA) help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can @@ -2239,7 +2237,7 @@ config SKFP config HIPPI bool "HIPPI driver support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL && INET && PCI + depends on EXPERIMENTAL && INET && PCI help HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI @@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS config PLIP tristate "PLIP (parallel port) support" - depends on NETDEVICES && PARPORT + depends on PARPORT ---help--- PLIP (Parallel Line Internet Protocol) is used to create a reasonably fast mini network consisting of two (or, rarely, more) @@ -2307,7 +2305,6 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" - depends on NETDEVICES ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2443,7 +2440,6 @@ config PPPOATM config SLIP tristate "SLIP (serial line) support" - depends on NETDEVICES ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some @@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6 config NET_FC bool "Fibre Channel driver support" - depends on NETDEVICES && SCSI && PCI + depends on SCSI && PCI help Fibre Channel is a high speed serial protocol mainly used to connect large storage devices to the computer; it is compatible with and @@ -2523,7 +2519,7 @@ config NET_FC config SHAPER tristate "Traffic Shaper (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to limit the rate of outgoing data flow over some other network device. @@ -2544,11 +2540,13 @@ config SHAPER config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" - depends on NETDEVICES && INET && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. +endif #NETDEVICES + config NETPOLL def_bool NETCONSOLE diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 8618012df06..d9ba8be72af 100755 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1290,7 +1290,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg writel(intr0, mmio + INT0); /* Check if Receive Interrupt has occurred. */ -#if CONFIG_AMD8111E_NAPI +#ifdef CONFIG_AMD8111E_NAPI if(intr0 & RINT0){ if(netif_rx_schedule_prep(dev)){ /* Disable receive interupts */ diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 6c57096aa2e..d209a1556b2 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -129,9 +129,9 @@ bad_clone_list[] __initdata = { #define NESM_START_PG 0x40 /* First page of TX buffer */ #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ -#ifdef CONFIG_PLAT_MAPPI +#if defined(CONFIG_PLAT_MAPPI) # define DCR_VAL 0x4b -#elif CONFIG_PLAT_OAKS32R +#elif defined(CONFIG_PLAT_OAKS32R) # define DCR_VAL 0x48 #else # define DCR_VAL 0x49 diff --git a/drivers/net/plip.c b/drivers/net/plip.c index 21537ee3a6a..1bd22cd40c7 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -160,7 +160,7 @@ static struct net_device_stats *plip_get_stats(struct net_device *dev); static int plip_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); static int plip_preempt(void *handle); static void plip_wakeup(void *handle); - + enum plip_connection_state { PLIP_CN_NONE=0, PLIP_CN_RECEIVE, @@ -231,8 +231,8 @@ struct net_local { atomic_t kill_timer; struct semaphore killed_timer_sem; }; - -inline static void enable_parport_interrupts (struct net_device *dev) + +static inline void enable_parport_interrupts (struct net_device *dev) { if (dev->irq != -1) { @@ -242,7 +242,7 @@ inline static void enable_parport_interrupts (struct net_device *dev) } } -inline static void disable_parport_interrupts (struct net_device *dev) +static inline void disable_parport_interrupts (struct net_device *dev) { if (dev->irq != -1) { @@ -252,7 +252,7 @@ inline static void disable_parport_interrupts (struct net_device *dev) } } -inline static void write_data (struct net_device *dev, unsigned char data) +static inline void write_data (struct net_device *dev, unsigned char data) { struct parport *port = ((struct net_local *)dev->priv)->pardev->port; @@ -260,14 +260,14 @@ inline static void write_data (struct net_device *dev, unsigned char data) port->ops->write_data (port, data); } -inline static unsigned char read_status (struct net_device *dev) +static inline unsigned char read_status (struct net_device *dev) { struct parport *port = ((struct net_local *)dev->priv)->pardev->port; return port->ops->read_status (port); } - + /* Entry point of PLIP driver. Probe the hardware, and register/initialize the driver. @@ -316,7 +316,7 @@ plip_init_netdev(struct net_device *dev) spin_lock_init(&nl->lock); } - + /* Bottom half handler for the delayed request. This routine is kicked by do_timer(). Request `plip_bh' to be invoked. */ @@ -471,7 +471,7 @@ plip_bh_timeout_error(struct net_device *dev, struct net_local *nl, return TIMEOUT; } - + static int plip_none(struct net_device *dev, struct net_local *nl, struct plip_local *snd, struct plip_local *rcv) @@ -481,7 +481,7 @@ plip_none(struct net_device *dev, struct net_local *nl, /* PLIP_RECEIVE --- receive a byte(two nibbles) Returns OK on success, TIMEOUT on timeout */ -inline static int +static inline int plip_receive(unsigned short nibble_timeout, struct net_device *dev, enum plip_nibble_state *ns_p, unsigned char *data_p) { @@ -582,7 +582,6 @@ static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev) return htons(ETH_P_802_2); } - /* PLIP_RECEIVE_PACKET --- receive a packet */ static int plip_receive_packet(struct net_device *dev, struct net_local *nl, @@ -702,7 +701,7 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl, /* PLIP_SEND --- send a byte (two nibbles) Returns OK on success, TIMEOUT when timeout */ -inline static int +static inline int plip_send(unsigned short nibble_timeout, struct net_device *dev, enum plip_nibble_state *ns_p, unsigned char data) { @@ -902,7 +901,7 @@ plip_error(struct net_device *dev, struct net_local *nl, return OK; } - + /* Handle the parallel port interrupts. */ static void plip_interrupt(int irq, void *dev_id, struct pt_regs * regs) @@ -957,7 +956,7 @@ plip_interrupt(int irq, void *dev_id, struct pt_regs * regs) spin_unlock_irq(&nl->lock); } - + static int plip_tx_packet(struct sk_buff *skb, struct net_device *dev) { @@ -1238,7 +1237,7 @@ plip_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } return 0; } - + static int parport[PLIP_MAX] = { [0 ... PLIP_MAX-1] = -1 }; static int timid; diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h index 1b70b7c9758..d9a774b91dd 100644 --- a/drivers/net/via-velocity.h +++ b/drivers/net/via-velocity.h @@ -1414,7 +1414,7 @@ static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr * the rest of the logic from the result of sleep/wakeup */ -inline static void mac_wol_reset(struct mac_regs __iomem * regs) +static inline void mac_wol_reset(struct mac_regs __iomem * regs) { /* Turn off SWPTAG right after leaving power mode */ @@ -1811,7 +1811,7 @@ struct velocity_info { * CHECK ME: locking */ -inline static int velocity_get_ip(struct velocity_info *vptr) +static inline int velocity_get_ip(struct velocity_info *vptr) { struct in_device *in_dev = (struct in_device *) vptr->dev->ip_ptr; struct in_ifaddr *ifa; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 47f3c5d0203..df20adcd073 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5013,7 +5013,7 @@ static void proc_SSID_on_close( struct inode *inode, struct file *file ) { enable_MAC(ai, &rsp, 1); } -inline static u8 hexVal(char c) { +static inline u8 hexVal(char c) { if (c>='0' && c<='9') return c -= '0'; if (c>='a' && c<='f') return c -= 'a'-10; if (c>='A' && c<='F') return c -= 'A'-10; |