aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
authorJames Smart <James.Smart@Emulex.Com>2009-05-22 14:50:54 -0400
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2009-06-08 11:18:10 -0500
commit3772a99175f5378b5001e8da364341a8b8226a4a (patch)
treedd710f890c5bc097c874ad1783cd26ea56e88f57 /drivers/scsi
parenta366695592ebc9151dd5a248681270f0925d8324 (diff)
[SCSI] lpfc 8.3.2 : Reorganization for SLI4
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/lpfc/lpfc.h72
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c17
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c84
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c69
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c1907
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c446
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c1006
8 files changed, 2517 insertions, 1088 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a111b..6c24c9aabe7 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -23,6 +23,13 @@
struct lpfc_sli2_slim;
+#define LPFC_PCI_DEV_LP 0x1
+#define LPFC_PCI_DEV_OC 0x2
+
+#define LPFC_SLI_REV2 2
+#define LPFC_SLI_REV3 3
+#define LPFC_SLI_REV4 4
+
#define LPFC_MAX_TARGET 4096 /* max number of targets supported */
#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
requests */
@@ -264,8 +271,8 @@ enum hba_state {
};
struct lpfc_vport {
- struct list_head listentry;
struct lpfc_hba *phba;
+ struct list_head listentry;
uint8_t port_type;
#define LPFC_PHYSICAL_PORT 1
#define LPFC_NPIV_PORT 2
@@ -420,8 +427,66 @@ enum intr_type_t {
};
struct lpfc_hba {
+ /* SCSI interface function jump table entries */
+ int (*lpfc_new_scsi_buf)
+ (struct lpfc_vport *, int);
+ struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+ (struct lpfc_hba *);
+ int (*lpfc_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_scsi_unprep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_release_scsi_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_rampdown_queue_depth)
+ (struct lpfc_hba *);
+ void (*lpfc_scsi_prep_cmnd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ struct lpfc_nodelist *);
+ int (*lpfc_scsi_prep_task_mgmt_cmd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ unsigned int, uint8_t);
+
+ /* IOCB interface function jump table entries */
+ int (*__lpfc_sli_issue_iocb)
+ (struct lpfc_hba *, uint32_t,
+ struct lpfc_iocbq *, uint32_t);
+ void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+ struct lpfc_iocbq *);
+ int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+ IOCB_t * (*lpfc_get_iocb_from_iocbq)
+ (struct lpfc_iocbq *);
+ void (*lpfc_scsi_cmd_iocb_cmpl)
+ (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+ /* MBOX interface function jump table entries */
+ int (*lpfc_sli_issue_mbox)
+ (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+ /* Slow-path IOCB process function jump table entries */
+ void (*lpfc_sli_handle_slow_ring_event)
+ (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ uint32_t mask);
+ /* INIT device interface function jump table entries */
+ int (*lpfc_sli_hbq_to_firmware)
+ (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+ int (*lpfc_sli_brdrestart)
+ (struct lpfc_hba *);
+ int (*lpfc_sli_brdready)
+ (struct lpfc_hba *, uint32_t);
+ void (*lpfc_handle_eratt)
+ (struct lpfc_hba *);
+ void (*lpfc_stop_port)
+ (struct lpfc_hba *);
+
+
+ /* SLI4 specific HBA data structure */
+ struct lpfc_sli4_hba sli4_hba;
+
struct lpfc_sli sli;
- uint32_t sli_rev; /* SLI2 or SLI3 */
+ uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+ uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
uint32_t sli3_options; /* Mask of enabled SLI3 options */
#define LPFC_SLI3_HBQ_ENABLED 0x01
#define LPFC_SLI3_NPIV_ENABLED 0x02
@@ -526,11 +591,12 @@ struct lpfc_hba {
unsigned long data_flags;
uint32_t hbq_in_use; /* HBQs in use flag */
- struct list_head hbqbuf_in_list; /* in-fly hbq buffer list */
+ struct list_head rb_pend_list; /* Received buffers to be processed */
uint32_t hbq_count; /* Count of configured HBQs */
struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
+ unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */
unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
void __iomem *slim_memmap_p; /* Kernel memory mapped address for
PCI BAR0 */
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0351e..4164b935ea9 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -267,8 +267,6 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *geniocb;
int rc;
@@ -331,7 +329,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
geniocb->vport = vport;
geniocb->retry = retry;
- rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
if (rc == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, geniocb);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be5644e07..5dd66925f4c 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -280,6 +280,8 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
struct lpfc_dmabuf *d_buf;
struct hbq_dmabuf *hbq_buf;
+ if (phba->sli_rev != 3)
+ return 0;
cnt = LPFC_HBQINFO_SIZE;
spin_lock_irq(&phba->hbalock);
@@ -489,12 +491,15 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
pring->next_cmdidx, pring->local_getidx,
pring->flag, pgpp->rspPutInx, pring->numRiocb);
}
- word0 = readl(phba->HAregaddr);
- word1 = readl(phba->CAregaddr);
- word2 = readl(phba->HSregaddr);
- word3 = readl(phba->HCregaddr);
- len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
- word0, word1, word2, word3);
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ word0 = readl(phba->HAregaddr);
+ word1 = readl(phba->CAregaddr);
+ word2 = readl(phba->HSregaddr);
+ word3 = readl(phba->HCregaddr);
+ len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+ "HC:%08x\n", word0, word1, word2, word3);
+ }
spin_unlock_irq(&phba->hbalock);
return len;
}
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf5c3d..8c5c3aea4a1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -84,7 +84,8 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
uint32_t ha_copy;
if (vport->port_state >= LPFC_VPORT_READY ||
- phba->link_state == LPFC_LINK_DOWN)
+ phba->link_state == LPFC_LINK_DOWN ||
+ phba->sli_rev > LPFC_SLI_REV3)
return 0;
/* Read the HBA Host Attention Register */
@@ -305,7 +306,7 @@ els_iocb_free_pcmb_exit:
* 0 - successfully issued fabric registration login for @vport
* -ENXIO -- failed to issue fabric registration login for @vport
**/
-static int
+int
lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
@@ -345,8 +346,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
err = 4;
goto fail;
}
- rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
- 0);
+ rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
if (rc) {
err = 5;
goto fail_free_mbox;
@@ -1350,14 +1350,12 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
IOCB_t *icmd;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int ret;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
ndlp = lpfc_findnode_did(vport, did);
if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1389,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
phba->fc_stat.elsXmitPLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
- ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (ret == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1499,9 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
PRLI *npr;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1543,8 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
@@ -1788,8 +1782,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ADISC *ap;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
uint16_t cmdsize;
@@ -1822,7 +1814,8 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
@@ -1937,15 +1930,10 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
spin_lock_irq(shost->host_lock);
if (ndlp->nlp_flag & NLP_LOGO_SND) {
spin_unlock_irq(shost->host_lock);
@@ -1978,7 +1966,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
@@ -2058,14 +2046,12 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(SCR));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2094,8 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
phba->fc_stat.elsXmitSCR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the rlease of
* the node.
@@ -2152,7 +2139,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
FARP *fp;
uint8_t *pcmd;
@@ -2162,7 +2148,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(FARP));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2204,8 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
phba->fc_stat.elsXmitFARPR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the release of
* the node.
@@ -2961,6 +2947,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
*/
lpfc_nlp_not_used(ndlp);
}
+
return;
}
@@ -3170,7 +3157,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
@@ -3178,7 +3164,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
ELS_PKT *els_pkt_ptr;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
oldcmd = &oldiocb->iocb;
switch (flag) {
@@ -3266,7 +3251,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
}
phba->fc_stat.elsXmitACC++;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3305,15 +3290,12 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = 2 * sizeof(uint32_t);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3328,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
phba->fc_stat.elsXmitLSRJT++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3361,6 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
ADISC *ap;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3402,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3459,14 +3439,12 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = sizeof(uint32_t) + sizeof(PRLI);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3498,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3562,15 +3540,12 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
RNID *rn;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
+ (2 * sizeof(struct lpfc_name));
if (format)
@@ -3626,7 +3601,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -4440,8 +4415,6 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
static void
lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
MAILBOX_t *mb;
IOCB_t *icmd;
RPS_RSP *rps_rsp;
@@ -4507,7 +4480,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
lpfc_els_free_iocb(phba, elsiocb);
return;
}
@@ -4616,8 +4589,6 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
IOCB_t *icmd, *oldcmd;
RPL_RSP rpl_rsp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4625,8 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
@@ -6139,7 +6111,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
@@ -6169,7 +6140,8 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6196,6 @@ lpfc_resume_fabric_iocbs(struct lpfc_hba *phba)
struct lpfc_iocbq *iocb;
unsigned long iflags;
int ret;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *cmd;
repeat:
@@ -6248,7 +6219,7 @@ repeat:
"Fabric sched1: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6365,6 @@ static int
lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
{
unsigned long iflags;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
int ready;
int ret;
@@ -6418,7 +6388,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
"Fabric sched2: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0bf70..25fc96c9081 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -555,23 +555,24 @@ lpfc_work_done(struct lpfc_hba *phba)
/*
* Turn on Ring interrupts
*/
- spin_lock_irq(&phba->hbalock);
- control = readl(phba->HCregaddr);
- if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Enable ring: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
-
- control |= (HC_R0INT_ENA << LPFC_ELS_RING);
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- }
- else {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Ring ok: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ spin_lock_irq(&phba->hbalock);
+ control = readl(phba->HCregaddr);
+ if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Enable ring: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
+
+ control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ } else {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Ring ok: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
+ }
+ spin_unlock_irq(&phba->hbalock);
}
- spin_unlock_irq(&phba->hbalock);
}
lpfc_work_list_done(phba);
}
@@ -689,7 +690,7 @@ lpfc_port_link_failure(struct lpfc_vport *vport)
lpfc_can_disctmo(vport);
}
-static void
+void
lpfc_linkdown_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
@@ -1147,10 +1148,12 @@ lpfc_enable_la(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
- control = readl(phba->HCregaddr);
- control |= HC_LAINT_ENA;
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ control = readl(phba->HCregaddr);
+ control |= HC_LAINT_ENA;
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
spin_unlock_irq(&phba->hbalock);
}
@@ -2919,11 +2922,13 @@ restart_disc:
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2959,11 +2964,13 @@ restart_disc:
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
break;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdcbf2d..3f06ce2becf 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -571,16 +571,20 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
int i;
- /* Disable interrupts */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ /* Disable interrupts */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
if (phba->pport->load_flag & FC_UNLOADING)
lpfc_cleanup_discovery_resources(phba->pport);
else {
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports &&
+ vports[i] != NULL; i++)
lpfc_cleanup_discovery_resources(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
}
@@ -588,7 +592,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
}
/**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +602,8 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
* 0 - sucess.
* Any other value - error.
**/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -909,13 +913,30 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
phba->work_hs = old_host_status & ~HS_FFER1;
+ spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+ struct lpfc_board_event_header board_event;
+ struct Scsi_Host *shost;
+
+ board_event.event_type = FC_REG_BOARD_EVENT;
+ board_event.subcategory = LPFC_EVENT_PORTINTERR;
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(board_event),
+ (char *) &board_event,
+ LPFC_NL_VENDOR_ID);
+}
+
/**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
@@ -924,8 +945,8 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
* 2 - DMA ring index out of range
* 3 - Mailbox command came back as unknown
**/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
@@ -934,24 +955,23 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
unsigned long temperature;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
- struct lpfc_board_event_header board_event;
/* If the pci channel is offline, ignore possible errors,
- * since we cannot communicate with the pci card anyway. */
- if (pci_channel_offline(phba->pcidev))
+ * since we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
return;
+ }
+
/* If resets are disabled then leave the HBA alone and return */
if (!phba->cfg_enable_hba_reset)
return;
/* Send an internal error event to mgmt application */
- board_event.event_type = FC_REG_BOARD_EVENT;
- board_event.subcategory = LPFC_EVENT_PORTINTERR;
- shost = lpfc_shost_from_vport(phba->pport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(board_event),
- (char *) &board_event,
- LPFC_NL_VENDOR_ID);
+ lpfc_board_errevt_to_mgmt(phba);
if (phba->hba_flag & DEFER_ERATT)
lpfc_handle_deferred_eratt(phba);
@@ -1137,7 +1157,7 @@ lpfc_handle_latt_err_exit:
* 0 - pointer to the VPD passed in is NULL
* 1 - success
**/
-static int
+int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
uint8_t lenlo, lenhi;
@@ -1533,7 +1553,8 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
icmd->ulpLe = 1;
- if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+ IOCB_ERROR) {
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
cnt++;
@@ -1761,7 +1782,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
* Lets wait for this to happen, if needed.
*/
while (!list_empty(&vport->fc_nodes)) {
-
if (i++ > 3000) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0233 Nodelist not empty\n");
@@ -1782,7 +1802,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
/* Wait for any activity on ndlps to settle */
msleep(10);
}
- return;
}
/**
@@ -1803,22 +1822,36 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
}
/**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
* invoked before either putting a HBA offline or unloading the driver.
**/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
- del_timer_sync(&phba->fcp_poll_timer);
lpfc_stop_vport_timers(phba->pport);
del_timer_sync(&phba->sli.mbox_tmo);
del_timer_sync(&phba->fabric_block_timer);
- phba->hb_outstanding = 0;
- del_timer_sync(&phba->hb_tmofunc);
del_timer_sync(&phba->eratt_poll);
+ del_timer_sync(&phba->hb_tmofunc);
+ phba->hb_outstanding = 0;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ /* Stop any LightPulse device specific driver timers */
+ del_timer_sync(&phba->fcp_poll_timer);
+ break;
+ case LPFC_PCI_DEV_OC:
+ /* Stop any OneConnect device sepcific driver timers */
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0297 Invalid device group (x%x)\n",
+ phba->pci_dev_grp);
+ break;
+ }
return;
}
@@ -2509,9 +2542,8 @@ lpfc_disable_msi(struct lpfc_hba *phba)
*
* This routine it invoked to log the currently used active interrupt mode
* to the device.
- */
-static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
{
switch (intr_mode) {
case 0:
@@ -2534,228 +2566,671 @@ lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
return;
}
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ int bars;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ goto out_error;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Enable PCI device */
+ if (pci_enable_device_mem(pdev))
+ goto out_error;
+ /* Request PCI resource for the device */
+ if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+ goto out_disable_device;
+ /* Set up device as PCI master and save state for EEH */
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+ pci_save_state(pdev);
+
+ return 0;
+
+out_disable_device:
+ pci_disable_device(pdev);
+out_error:
+ return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
static void
-lpfc_stop_port(struct lpfc_hba *phba)
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
{
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
+ struct pci_dev *pdev;
+ int bars;
- /* Reset some HBA SLI setup states */
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Release PCI resource and disable PCI device */
+ pci_release_selected_regions(pdev, bars);
+ pci_disable_device(pdev);
+ /* Null out PCI private reference to driver */
+ pci_set_drvdata(pdev, NULL);
return;
}
/**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_reset_hba - Reset a hba
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+ /* If resets are disabled then set error state and return. */
+ if (!phba->cfg_enable_hba_reset) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return;
+ }
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+ lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
- * other values - error
+ * 0 - sucessful
+ * other values - error
**/
-static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
- uint32_t intr_mode = LPFC_INTR_ERROR;
- int retval;
+ struct lpfc_sli *psli;
- if (cfg_mode == 2) {
- /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
- retval = lpfc_sli_config_port(phba, 3);
- if (!retval) {
- /* Now, try to enable MSI-X interrupt mode */
- retval = lpfc_enable_msix(phba);
- if (!retval) {
- /* Indicate initialization to MSI-X mode */
- phba->intr_type = MSIX;
- intr_mode = 2;
- }
- }
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* FCP polling mode timer */
+ init_timer(&phba->fcp_poll_timer);
+ phba->fcp_poll_timer.function = lpfc_poll_timeout;
+ phba->fcp_poll_timer.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+
+ /* Host attention work mask setup */
+ phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+ phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_enable_bg) {
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ phba->cfg_sg_dma_buf_size +=
+ phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
}
- /* Fallback to MSI if MSI-X initialization failed */
- if (cfg_mode >= 1 && phba->intr_type == NONE) {
- retval = lpfc_enable_msi(phba);
- if (!retval) {
- /* Indicate initialization to MSI mode */
- phba->intr_type = MSI;
- intr_mode = 1;
- }
+ /* Also reinitialize the host templates with new values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after config_port mbox */
+ phba->max_vports = 0;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc HBAs.
+ */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+ /* Free device driver memory allocated */
+ lpfc_mem_free_all(phba);
+
+ return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+ phba->lpfc_stop_port = lpfc_stop_port_s3;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1431 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
}
+ return 0;
+}
- /* Fallback to INTx if both MSI-X/MSI initalization failed */
- if (phba->intr_type == NONE) {
- retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
- IRQF_SHARED, LPFC_DRIVER_NAME, phba);
- if (!retval) {
- /* Indicate initialization to INTx mode */
- phba->intr_type = INTx;
- intr_mode = 0;
- }
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+ /*
+ * Driver resources common to all SLI revisions
+ */
+ atomic_set(&phba->fast_event_count, 0);
+ spin_lock_init(&phba->hbalock);
+
+ /* Initialize ndlp management spinlock */
+ spin_lock_init(&phba->ndlp_lock);
+
+ INIT_LIST_HEAD(&phba->port_list);
+ INIT_LIST_HEAD(&phba->work_list);
+ init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+ /* Initialize the wait queue head for the kernel thread */
+ init_waitqueue_head(&phba->work_waitq);
+
+ /* Initialize the scsi buffer list used by driver for scsi IO */
+ spin_lock_init(&phba->scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+ /* Initialize the fabric iocb list */
+ INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+ /* Initialize list to save ELS buffers */
+ INIT_LIST_HEAD(&phba->elsbuf);
+
+ /* Initialize FCF connection rec list */
+ INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+ return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+ int error;
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ return error;
}
- return intr_mode;
+
+ return 0;
}
/**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
**/
static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
{
- /* Disable the currently initialized interrupt mode */
- if (phba->intr_type == MSIX)
- lpfc_disable_msix(phba);
- else if (phba->intr_type == MSI)
- lpfc_disable_msi(phba);
- else if (phba->intr_type == INTx)
- free_irq(phba->pcidev->irq, phba);
+ /* Stop kernel worker thread */
+ kthread_stop(phba->worker_thread);
+}
- /* Reset interrupt management states */
- phba->intr_type = NONE;
- phba->sli.slistat.sli_intr = 0;
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+ struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+ spin_lock_irq(&phba->hbalock);
+ list_for_each_entry_safe(iocbq_entry, iocbq_next,
+ &phba->lpfc_iocb_list, list) {
+ list_del(&iocbq_entry->list);
+ kfree(iocbq_entry);
+ phba->total_iocbq_bufs--;
+ }
+ spin_unlock_irq(&phba->hbalock);
return;
}
/**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
*
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
*
- * Return code
- * 0 - driver can claim the device
- * negative value - driver can not claim the device
+ * Return codes
+ * 0 - sucessful
+ * other values - error
**/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
{
- struct lpfc_vport *vport = NULL;
- struct lpfc_hba *phba;
- struct lpfc_sli *psli;
- struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
- struct Scsi_Host *shost = NULL;
- void *ptr;
- unsigned long bar0map_len, bar2map_len;
- int error = -ENODEV, retval;
- int i, hbq_count;
+ struct lpfc_iocbq *iocbq_entry = NULL;
uint16_t iotag;
- uint32_t cfg_mode, intr_mode;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
- struct lpfc_adapter_event_header adapter_event;
+ int i;
- if (pci_enable_device_mem(pdev))
- goto out;
- if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
- goto out_disable_device;
+ /* Initialize and populate the iocb list per host. */
+ INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+ for (i = 0; i < iocb_count; i++) {
+ iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+ if (iocbq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d iocbs of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, LPFC_IOCB_LIST_CNT);
+ goto out_free_iocbq;
+ }
- phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
- if (!phba)
- goto out_release_regions;
+ iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+ if (iotag == 0) {
+ kfree(iocbq_entry);
+ printk(KERN_ERR "%s: failed to allocate IOTAG. "
+ "Unloading driver.\n", __func__);
+ goto out_free_iocbq;
+ }
+ iocbq_entry->sli4_xritag = NO_XRI;
- atomic_set(&phba->fast_event_count, 0);
- spin_lock_init(&phba->hbalock);
+ spin_lock_irq(&phba->hbalock);
+ list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+ phba->total_iocbq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
- /* Initialize ndlp management spinlock */
- spin_lock_init(&phba->ndlp_lock);
+ return 0;
+
+out_free_iocbq:
+ lpfc_free_iocb_list(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ * pointer to @phba - sucessful
+ * NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+ struct lpfc_hba *phba;
+
+ /* Allocate memory for HBA structure */
+ phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+ if (!phba) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1417 Failed to allocate hba struct.\n");
+ return NULL;
+ }
+
+ /* Set reference to PCI device in HBA structure */
phba->pcidev = pdev;
/* Assign an unused board number */
- if ((phba->brd_no = lpfc_get_instance()) < 0)
- goto out_free_phba;
+ phba->brd_no = lpfc_get_instance();
+ if (phba->brd_no < 0) {
+ kfree(phba);
+ return NULL;
+ }
+
+ return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+ /* Release the driver assigned board number */
+ idr_remove(&lpfc_hba_index, phba->brd_no);
+
+ kfree(phba);
+ return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport;
+ struct Scsi_Host *shost;
+
+ /* Initialize HBA FC structure */
+ phba->fc_edtov = FF_DEF_EDTOV;
+ phba->fc_ratov = FF_DEF_RATOV;
+ phba->fc_altov = FF_DEF_ALTOV;
+ phba->fc_arbtov = FF_DEF_ARBTOV;
+
+ vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+ if (!vport)
+ return -ENODEV;
+
+ shost = lpfc_shost_from_vport(vport);
+ phba->pport = vport;
+ lpfc_debugfs_initialize(vport);
+ /* Put reference to SCSI host to driver's device private data */
+ pci_set_drvdata(phba->pcidev, shost);
+
+ return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+
+ /* Destroy physical port that associated with the SCSI host */
+ destroy_port(vport);
+
+ return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+ int pagecnt = 10;
+ if (lpfc_prot_mask && lpfc_prot_guard) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "1478 Registering BlockGuard with the "
+ "SCSI layer\n");
+ scsi_host_set_prot(shost, lpfc_prot_mask);
+ scsi_host_set_guard(shost, lpfc_prot_guard);
+ }
+ if (!_dump_buf_data) {
+ while (pagecnt) {
+ spin_lock_init(&_dump_buf_lock);
+ _dump_buf_data =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_data) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_data at 0x%p\n",
+ (1 << pagecnt), _dump_buf_data);
+ _dump_buf_data_order = pagecnt;
+ memset(_dump_buf_data, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_data_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+ "\n", _dump_buf_data);
+ if (!_dump_buf_dif) {
+ while (pagecnt) {
+ _dump_buf_dif =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_dif) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_dif at 0x%p\n",
+ (1 << pagecnt), _dump_buf_dif);
+ _dump_buf_dif_order = pagecnt;
+ memset(_dump_buf_dif, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_dif_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+ _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_adapter_event_header adapter_event;
+
+ /* Get the default values for Model Name and Description */
+ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
- INIT_LIST_HEAD(&phba->port_list);
- init_waitqueue_head(&phba->wait_4_mlo_m_q);
/*
- * Get all the module params for configuring this host and then
- * establish the host.
+ * hba setup may have changed the hba_queue_depth so we need to
+ * adjust the value of can_queue.
*/
- lpfc_get_cfgparam(phba);
- phba->max_vpi = LPFC_MAX_VPI;
+ shost = pci_get_drvdata(phba->pcidev);
+ shost->can_queue = phba->cfg_hba_queue_depth - 10;
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+ lpfc_setup_bg(phba, shost);
- /* Initialize timers used by driver */
- init_timer(&phba->hb_tmofunc);
- phba->hb_tmofunc.function = lpfc_hb_timeout;
- phba->hb_tmofunc.data = (unsigned long)phba;
+ lpfc_host_attrib_init(shost);
- psli = &phba->sli;
- init_timer(&psli->mbox_tmo);
- psli->mbox_tmo.function = lpfc_mbox_timeout;
- psli->mbox_tmo.data = (unsigned long) phba;
- init_timer(&phba->fcp_poll_timer);
- phba->fcp_poll_timer.function = lpfc_poll_timeout;
- phba->fcp_poll_timer.data = (unsigned long) phba;
- init_timer(&phba->fabric_block_timer);
- phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
- phba->fabric_block_timer.data = (unsigned long) phba;
- init_timer(&phba->eratt_poll);
- phba->eratt_poll.function = lpfc_poll_eratt;
- phba->eratt_poll.data = (unsigned long) phba;
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ spin_lock_irq(shost->host_lock);
+ lpfc_poll_start_timer(phba);
+ spin_unlock_irq(shost->host_lock);
+ }
- pci_set_master(pdev);
- pci_save_state(pdev);
- pci_try_set_mwi(pdev);
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0428 Perform SCSI scan\n");
+ /* Send board arrival event to upper layer */
+ adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+ adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(adapter_event),
+ (char *) &adapter_event,
+ LPFC_NL_VENDOR_ID);
+ return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar2map_len;
+ int i, hbq_count;
+ void *ptr;
+ int error = -ENODEV;
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
- goto out_idr_remove;
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
- /*
- * Get the bus address of Bar0 and Bar2 and the number of bytes
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
*/
- phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
- bar0map_len = pci_resource_len(phba->pcidev, 0);
+ phba->pci_bar0_map = pci_resource_start(pdev, 0);
+ bar0map_len = pci_resource_len(pdev, 0);
- phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
- bar2map_len = pci_resource_len(phba->pcidev, 2);
+ phba->pci_bar2_map = pci_resource_start(pdev, 2);
+ bar2map_len = pci_resource_len(pdev, 2);
/* Map HBA SLIM to a kernel virtual address. */
phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->slim_memmap_p) {
- error = -ENODEV;
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLIM memory.\n");
- goto out_idr_remove;
+ goto out;
}
/* Map HBA Control Registers to a kernel virtual address. */
phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->ctrl_regs_memmap_p) {
- error = -ENODEV;
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for HBA control registers.\n");
goto out_iounmap_slim;
}
/* Allocate memory for SLI-2 structures */
- phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
+ phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
SLI2_SLIM_SIZE,
&phba->slim2p.phys,
GFP_KERNEL);
@@ -2768,7 +3243,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->IOCBs = (phba->slim2p.virt +
offsetof(struct lpfc_sli2_slim, IOCBs));
- phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
+ phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
lpfc_sli_hbq_size(),
&phba->hbqslimp.phys,
GFP_KERNEL);
@@ -2784,115 +3259,487 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
sizeof(struct lpfc_hbq_entry));
}
phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
- phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
- INIT_LIST_HEAD(&phba->hbqbuf_in_list);
+ INIT_LIST_HEAD(&phba->rb_pend_list);
- /* Initialize the SLI Layer to run with lpfc HBAs. */
- lpfc_sli_setup(phba);
- lpfc_sli_queue_setup(phba);
+ phba->MBslimaddr = phba->slim_memmap_p;
+ phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+ phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+ phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+ phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+ return 0;
+
+out_free_slim:
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+ iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+ iounmap(phba->slim_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+ dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+ phba->hbqslimp.virt, phba->hbqslimp.phys);
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+
+ /* I/O memory unmap */
+ iounmap(phba->ctrl_regs_memmap_p);
+ iounmap(phba->slim_memmap_p);
+
+ return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
+ * later when device is unloading, the driver should always call free_irq()
+ * on all MSI-X vectors it has done request_irq() on before calling
+ * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
+ * will be left with MSI-X enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
+{
+ int rc, i;
+ LPFC_MBOXQ_t *pmb;
+
+ /* Set up MSI-X multi-message vectors */
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ phba->msix_entries[i].entry = i;
- retval = lpfc_mem_alloc(phba);
- if (retval) {
- error = retval;
- goto out_free_hbqslimp;
+ /* Configure MSI-X capability structure */
+ rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
+ ARRAY_SIZE(phba->msix_entries));
+ if (rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0420 PCI enable MSI-X failed (%d)\n", rc);
+ goto msi_fail_out;
}
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0477 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", i,
+ phba->msix_entries[i].vector,
+ phba->msix_entries[i].entry);
+ /*
+ * Assign MSI-X vectors to interrupt handlers
+ */
- /* Initialize and populate the iocb list per host. */
- INIT_LIST_HEAD(&phba->lpfc_iocb_list);
- for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
- iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
- if (iocbq_entry == NULL) {
- printk(KERN_ERR "%s: only allocated %d iocbs of "
- "expected %d count. Unloading driver.\n",
- __func__, i, LPFC_IOCB_LIST_CNT);
- error = -ENOMEM;
- goto out_free_iocbq;
+ /* vector-0 is associated to slow-path handler */
+ rc = request_irq(phba->msix_entries[0].vector,
+ &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0421 MSI-X slow-path request_irq failed "
+ "(%d)\n", rc);
+ goto msi_fail_out;
+ }
+
+ /* vector-1 is associated to fast-path handler */
+ rc = request_irq(phba->msix_entries[1].vector,
+ &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME, phba);
+
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0429 MSI-X fast-path request_irq failed "
+ "(%d)\n", rc);
+ goto irq_fail_out;
+ }
+
+ /*
+ * Configure HBA MSI-X attention conditions to messages
+ */
+ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+ if (!pmb) {
+ rc = -ENOMEM;
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0474 Unable to allocate memory for issuing "
+ "MBOX_CONFIG_MSI command\n");
+ goto mem_fail_out;
+ }
+ rc = lpfc_config_msi(phba, pmb);
+ if (rc)
+ goto mbx_fail_out;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+ "0351 Config MSI mailbox command failed, "
+ "mbxCmd x%x, mbxStatus x%x\n",
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
+ goto mbx_fail_out;
+ }
+
+ /* Free memory allocated for mailbox command */
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return rc;
+
+mbx_fail_out:
+ /* Free memory allocated for mailbox command */
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+mem_fail_out:
+ /* free the irq already requested */
+ free_irq(phba->msix_entries[1].vector, phba);
+
+irq_fail_out:
+ /* free the irq already requested */
+ free_irq(phba->msix_entries[0].vector, phba);
+
+msi_fail_out:
+ /* Unconfigure MSI-X capability structure */
+ pci_disable_msix(phba->pcidev);
+ return rc;
+}
+
+/**
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
+{
+ int i;
+
+ /* Free up MSI-X multi-message vectors */
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ free_irq(phba->msix_entries[i].vector, phba);
+ /* Disable MSI-X */
+ pci_disable_msix(phba->pcidev);
+
+ return;
+}
+
+/**
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ */
+static int
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
+{
+ int rc;
+
+ rc = pci_enable_msi(phba->pcidev);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0462 PCI enable MSI mode success.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0471 PCI enable MSI mode failed (%d)\n", rc);
+ return rc;
+ }
+
+ rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (rc) {
+ pci_disable_msi(phba->pcidev);
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0478 MSI request_irq failed (%d)\n", rc);
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ */
+static void
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
+{
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msi(phba->pcidev);
+ return;
+}
+
+/**
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static uint32_t
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+ uint32_t intr_mode = LPFC_INTR_ERROR;
+ int retval;
+
+ if (cfg_mode == 2) {
+ /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+ retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
+ if (!retval) {
+ /* Now, try to enable MSI-X interrupt mode */
+ retval = lpfc_sli_enable_msix(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI-X mode */
+ phba->intr_type = MSIX;
+ intr_mode = 2;
+ }
}
+ }
- iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
- if (iotag == 0) {
- kfree (iocbq_entry);
- printk(KERN_ERR "%s: failed to allocate IOTAG. "
- "Unloading driver.\n",
- __func__);
- error = -ENOMEM;
- goto out_free_iocbq;
+ /* Fallback to MSI if MSI-X initialization failed */
+ if (cfg_mode >= 1 && phba->intr_type == NONE) {
+ retval = lpfc_sli_enable_msi(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI mode */
+ phba->intr_type = MSI;
+ intr_mode = 1;
}
+ }
- spin_lock_irq(&phba->hbalock);
- list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
- phba->total_iocbq_bufs++;
- spin_unlock_irq(&phba->hbalock);
+ /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ if (phba->intr_type == NONE) {
+ retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (!retval) {
+ /* Indicate initialization to INTx mode */
+ phba->intr_type = INTx;
+ intr_mode = 0;
+ }
}
+ return intr_mode;
+}
- /* Initialize HBA structure */
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
- phba->fc_altov = FF_DEF_ALTOV;
- phba->fc_arbtov = FF_DEF_ARBTOV;
+/**
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate the
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
+ **/
+static void
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
+{
+ /* Disable the currently initialized interrupt mode */
+ if (phba->intr_type == MSIX)
+ lpfc_sli_disable_msix(phba);
+ else if (phba->intr_type == MSI)
+ lpfc_sli_disable_msi(phba);
+ else if (phba->intr_type == INTx)
+ free_irq(phba->pcidev->irq, phba);
- INIT_LIST_HEAD(&phba->work_list);
- phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
- phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+ /* Reset interrupt management states */
+ phba->intr_type = NONE;
+ phba->sli.slistat.sli_intr = 0;
- /* Initialize the wait queue head for the kernel thread */
- init_waitqueue_head(&phba->work_waitq);
+ return;
+}
- /* Startup the kernel thread for this host adapter. */
- phba->worker_thread = kthread_run(lpfc_do_work, phba,
- "lpfc_worker_%d", phba->brd_no);
- if (IS_ERR(phba->worker_thread)) {
- error = PTR_ERR(phba->worker_thread);
- goto out_free_iocbq;
+/**
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
+ **/
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
+
+ lpfc_stop_hba_timers(phba);
+
+ phba->pport->work_port_events = 0;
+
+ lpfc_sli_hba_down(phba);
+
+ lpfc_sli_brdrestart(phba);
+
+ lpfc_sli_disable_intr(phba);
+
+ return;
+}
+
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
+
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
+
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1401 Failed to enable pci device.\n");
+ goto out_free_phba;
}
- /* Initialize the list of scsi buffers used by driver for scsi IO. */
- spin_lock_init(&phba->scsi_buf_list_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+ /* Set up SLI API function jump table for PCI-device group-0 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+ if (error)
+ goto out_disable_pci_dev;
- /* Initialize list of fabric iocbs */
- INIT_LIST_HEAD(&phba->fabric_iocb_list);
+ /* Set up SLI-3 specific device PCI memory space */
+ error = lpfc_sli_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1402 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
- /* Initialize list to save ELS buffers */
- INIT_LIST_HEAD(&phba->elsbuf);
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1403 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
- if (!vport)
- goto out_kthread_stop;
+ /* Set up SLI-3 specific device driver resources */
+ error = lpfc_sli_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1404 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- shost = lpfc_shost_from_vport(vport);
- phba->pport = vport;
- lpfc_debugfs_initialize(vport);
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1405 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s3;
+ }
- pci_set_drvdata(pdev, shost);
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1406 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
- phba->MBslimaddr = phba->slim_memmap_p;
- phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
- phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
- phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
- phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1407 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
/* Configure sysfs attributes */
- if (lpfc_alloc_sysfs_attr(vport)) {
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1476 Failed to allocate sysfs attr\n");
- error = -ENOMEM;
- goto out_destroy_port;
+ goto out_destroy_shost;
}
+ /* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, cfg_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0426 Failed to enable interrupt.\n");
+ "0431 Failed to enable interrupt.\n");
+ error = -ENODEV;
goto out_free_sysfs_attr;
}
- /* HBA SLI setup */
+ /* SLI-3 HBA setup */
if (lpfc_sli_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1477 Failed to set up hba\n");
@@ -2902,185 +3749,65 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
/* Wait 50ms for the interrupts of previous mailbox commands */
msleep(50);
- /* Check active interrupts received */
- if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+ /* Check active interrupts on message signaled interrupts */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
break;
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0451 Configure interrupt mode (%d) "
+ "0447 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
- if (intr_mode == 0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0479 Failed to enable "
- "interrupt.\n");
- error = -ENODEV;
- goto out_remove_device;
- }
- /* Stop HBA SLI setups */
- lpfc_stop_port(phba);
/* Disable the current interrupt mode */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;
}
}
- /*
- * hba setup may have changed the hba_queue_depth so we need to adjust
- * the value of can_queue.
- */
- shost->can_queue = phba->cfg_hba_queue_depth - 10;
- if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
-
- if (lpfc_prot_mask && lpfc_prot_guard) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "1478 Registering BlockGuard with the "
- "SCSI layer\n");
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
- scsi_host_set_prot(shost, lpfc_prot_mask);
- scsi_host_set_guard(shost, lpfc_prot_guard);
- }
- }
-
- if (!_dump_buf_data) {
- int pagecnt = 10;
- while (pagecnt) {
- spin_lock_init(&_dump_buf_lock);
- _dump_buf_data =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_data at 0x%p\n",
- (1 << pagecnt), _dump_buf_data);
- _dump_buf_data_order = pagecnt;
- memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_data_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
- "\n", _dump_buf_data);
- }
-
-
- if (!_dump_buf_dif) {
- int pagecnt = 10;
- while (pagecnt) {
- _dump_buf_dif =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_dif at 0x%p\n",
- (1 << pagecnt), _dump_buf_dif);
- _dump_buf_dif_order = pagecnt;
- memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_dif_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
- _dump_buf_dif);
- }
-
- lpfc_host_attrib_init(shost);
-
- if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
- spin_lock_irq(shost->host_lock);
- lpfc_poll_start_timer(phba);
- spin_unlock_irq(shost->host_lock);
- }
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0428 Perform SCSI scan\n");
- /* Send board arrival event to upper layer */
- adapter_event.event_type = FC_REG_ADAPTER_EVENT;
- adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(adapter_event),
- (char *) &adapter_event,
- LPFC_NL_VENDOR_ID);
+ /* Check if there are static vports to be created. */
+ lpfc_create_static_vport(phba);
return 0;
out_remove_device:
- spin_lock_irq(shost->host_lock);
- vport->load_flag |= FC_UNLOADING;
- spin_unlock_irq(shost->host_lock);
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
- lpfc_disable_intr(phba);
- lpfc_sli_hba_down(phba);
- lpfc_sli_brdrestart(phba);
+ lpfc_unset_hba(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
-out_destroy_port:
- destroy_port(vport);
-out_kthread_stop:
- kthread_stop(phba->worker_thread);
-out_free_iocbq:
- list_for_each_entry_safe(iocbq_entry, iocbq_next,
- &phba->lpfc_iocb_list, list) {
- kfree(iocbq_entry);
- phba->total_iocbq_bufs--;
- }
- lpfc_mem_free(phba);
-out_free_hbqslimp:
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
- phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
- phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
- iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
- iounmap(phba->slim_memmap_p);
-out_idr_remove:
- idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+ lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+ lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
out_free_phba:
- kfree(phba);
-out_release_regions:
- pci_release_selected_regions(pdev, bars);
-out_disable_device:
- pci_disable_device(pdev);
-out:
- pci_set_drvdata(pdev, NULL);
- if (shost)
- scsi_host_put(shost);
+ lpfc_hba_free(phba);
return error;
}
/**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
**/
static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +3825,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
fc_vport_terminate(vports[i]->fc_vport);
lpfc_destroy_vport_work_array(phba, vports);
@@ -3120,7 +3847,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
- lpfc_stop_phba_timers(phba);
+ lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +3855,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
lpfc_debugfs_terminate(vport);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
pci_set_drvdata(pdev, NULL);
scsi_host_put(shost);
@@ -3138,7 +3865,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
* corresponding pools here.
*/
lpfc_scsi_free(phba);
- lpfc_mem_free(phba);
+ lpfc_mem_free_all(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +3878,35 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
- idr_remove(&lpfc_hba_index, phba->brd_no);
-
- kfree(phba);
+ lpfc_hba_free(phba);
pci_release_selected_regions(pdev, bars);
pci_disable_device(pdev);
}
/**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
* @msg: power management message
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +3920,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
kthread_stop(phba->worker_thread);
/* Disable interrupt from device */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
@@ -3204,25 +3930,26 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
}
/**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +3977,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
}
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +3996,24 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
}
/**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
*
* Return codes
- * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +4040,32 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
lpfc_sli_abort_iocb_ring(phba, pring);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
/**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
* @pdev: pointer to PCI device.
*
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
*
* Return codes
- * PCI_ERS_RESULT_RECOVERED - the device has been recovered
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
*/
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +4084,11 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0427 Cannot re-enable interrupt after "
@@ -3378,15 +4108,17 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
}
/**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
* @pdev: pointer to PCI device
*
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
*/
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3394,6 +4126,235 @@ static void lpfc_io_resume(struct pci_dev *pdev)
lpfc_online(phba);
}
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ int rc;
+ uint16_t dev_id;
+
+ if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+ return -ENODEV;
+
+ switch (dev_id) {
+ default:
+ rc = lpfc_pci_probe_one_s3(pdev, pid);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_pci_remove_one_s3(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1424 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_suspend_one_s3(pdev, msg);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1425 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_resume_one_s3(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1426 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_error_detected_s3(pdev, state);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1427 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_slot_reset_s3(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1428 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_io_resume_s3(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1429 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
+}
+
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
@@ -3469,6 +4430,10 @@ static struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
@@ -3486,7 +4451,7 @@ static struct pci_driver lpfc_driver = {
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
.suspend = lpfc_pci_suspend_one,
- .resume = lpfc_pci_resume_one,
+ .resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
};
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 167b66dd34c..a226c053c0f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -438,22 +438,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
}
/**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
* @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
*
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O. The non-DMAable buffer region
- * contains information to build the IOCB. The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
*
* Return codes:
- * NULL - Error
- * Pointer to lpfc_scsi_buf data structure - Success
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
**/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
@@ -463,107 +464,134 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
+ int bcnt;
- psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
- if (!psb)
- return NULL;
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
- /*
- * Get memory from the pci pool to map the virt space to pci bus space
- * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
- * struct fcp_rsp and the number of bde's necessary to support the
- * sg_tablesize.
- */
- psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
- &psb->dma_handle);
- if (!psb->data) {
- kfree(psb);
- return NULL;
- }
-
- /* Initialize virtual ptrs to dma_buf region. */
- memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
-
- /* Allocate iotag for psb->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
- if (iotag == 0) {
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree (psb);
- return NULL;
- }
- psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
-
- psb->fcp_cmnd = psb->data;
- psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
- psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
-
- /* Initialize local short-hand pointers. */
- bpl = psb->fcp_bpl;
- pdma_phys_fcp_cmd = psb->dma_handle;
- pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
- pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ /*
+ * Get memory from the pci pool to map the virt space to pci
+ * bus space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
+
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_cmnd = psb->data;
+ psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+ psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
- /*
- * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
- * list bdes. Initialize the first two and leave the rest for
- * queuecommand.
- */
- bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
- bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
- bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
- bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
-
- /* Setup the physical region for the FCP RSP */
- bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
- bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
- bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
- bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+ /* Initialize local short-hand pointers. */
+ bpl = psb->fcp_bpl;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+
+ /* Setup the physical region for the FCP RSP */
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+ BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize =
+ (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow =
+ putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh =
+ putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
+ iocb->ulpClass = CLASS3;
+ psb->status = IOSTAT_SUCCESS;
- /*
- * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
- * initialize it with all known data now.
- */
- iocb = &psb->cur_iocbq.iocb;
- iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- if ((phba->sli_rev == 3) &&
- !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
- /* fill in immediate fcp command BDE */
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
- iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
- iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
- unsli3.fcp_ext.icd);
- iocb->un.fcpi64.bdl.addrHigh = 0;
- iocb->ulpBdeCount = 0;
- iocb->ulpLe = 0;
- /* fill in responce BDE */
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
- sizeof(struct fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrLow =
- putPaddrLow(pdma_phys_fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrHigh =
- putPaddrHigh(pdma_phys_fcp_rsp);
- } else {
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
- iocb->ulpBdeCount = 1;
- iocb->ulpLe = 1;
}
- iocb->ulpClass = CLASS3;
- return psb;
+ return bcnt;
}
/**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+ return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
* and returns to caller.
@@ -591,7 +619,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
}
/**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
@@ -599,7 +627,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
* lpfc_scsi_buf_list list.
**/
static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
unsigned long iflag = 0;
@@ -610,21 +638,36 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
}
/**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+ phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
*
* Return codes:
* 1 - Error
* 0 - Success
**/
static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
@@ -1412,6 +1455,24 @@ out:
}
/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
* lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
@@ -1504,15 +1565,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
}
/**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
* This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
**/
static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
/*
* There are only two special cases to consider. (1) the scsi command
@@ -1529,6 +1590,20 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
}
/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
* lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +1751,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
* lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
*
* This routine assigns scsi command result by looking into response IOCB
* status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2032,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
}
/**
- * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
*
* This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
**/
static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
{
struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2088,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
- iocb_cmd->un.fcpi.fcpi_parm = 0;
- iocb_cmd->ulpPU = 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ iocb_cmd->un.fcpi.fcpi_parm = 0;
+ iocb_cmd->ulpPU = 0;
+ } else
+ iocb_cmd->ulpPU = PARM_READ_CHECK;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
@@ -2051,20 +2129,37 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
* @task_mgmt_cmd: SCSI task management command.
*
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
*
* Return codes:
* 0 - Error
* 1 - Success
**/
static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
unsigned int lun,
uint8_t task_mgmt_cmd)
@@ -2114,6 +2209,67 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
}
/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+
+ return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s3;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1418 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+ phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+ return 0;
+}
+
+/**
* lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2334,8 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status != IOCB_SUCCESS) {
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2460,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2427,7 +2581,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
atomic_inc(&ndlp->cmd_pending);
- err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+ err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
if (err) {
atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +2644,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
struct lpfc_iocbq *iocb;
struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +2684,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
icmd = &abtsiocb->iocb;
icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
icmd->un.acxri.abortContextTag = cmd->ulpContext;
- icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+ else
+ icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +2698,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
- if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
@@ -2668,8 +2825,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +2981,10 @@ lpfc_slave_alloc(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *scsi_buf = NULL;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- uint32_t total = 0, i;
+ uint32_t total = 0;
uint32_t num_to_alloc = 0;
- unsigned long flags;
+ int num_allocated = 0;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
@@ -2863,20 +3018,13 @@ lpfc_slave_alloc(struct scsi_device *sdev)
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
-
- for (i = 0; i < num_to_alloc; i++) {
- scsi_buf = lpfc_new_scsi_buf(vport);
- if (!scsi_buf) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0706 Failed to allocate "
- "command buffer\n");
- break;
- }
-
- spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
- phba->total_scsi_bufs++;
- list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
- spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+ num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+ if (num_to_alloc != num_allocated) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c45ba..e2d07d97fa8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
- * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
@@ -152,7 +152,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
* clears all other fields of the iocb object when it is freed.
**/
static void
-__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
{
size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
@@ -160,10 +160,27 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
* Clean all volatile data fields, preserve iotag and node struct.
*/
memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
}
/**
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ phba->__lpfc_sli_release_iocbq(phba, iocbq);
+}
+
+/**
* lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
@@ -779,8 +796,8 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
phba->hbqs[i].buffer_count = 0;
}
/* Return all HBQ buffer that are in-fly */
- list_for_each_entry_safe(dmabuf, next_dmabuf,
- &phba->hbqbuf_in_list, list) {
+ list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+ list) {
hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
list_del(&hbq_buf->dbuf.list);
if (hbq_buf->tag == -1) {
@@ -814,10 +831,28 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
* pointer to the hbq entry if it successfully post the buffer
* else it will return NULL.
**/
-static struct lpfc_hbq_entry *
+static int
lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
struct hbq_dmabuf *hbq_buf)
{
+ return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
struct lpfc_hbq_entry *hbqe;
dma_addr_t physaddr = hbq_buf->dbuf.phys;
@@ -838,8 +873,9 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
/* flush */
readl(phba->hbq_put + hbqno);
list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
- }
- return hbqe;
+ return 0;
+ } else
+ return -ENOMEM;
}
/* HBQ for ELS and CT traffic. */
@@ -914,7 +950,7 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
dbuf.list);
hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
(hbqno << 16));
- if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
phba->hbqs[hbqno].buffer_count++;
posted++;
} else
@@ -965,6 +1001,25 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
}
/**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+ struct lpfc_dmabuf *d_buf;
+
+ list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+ if (!d_buf)
+ return NULL;
+ return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
* lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
@@ -985,12 +1040,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
if (hbqno >= LPFC_MAX_HBQS)
return NULL;
+ spin_lock_irq(&phba->hbalock);
list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
if (hbq_buf->tag == tag) {
+ spin_unlock_irq(&phba->hbalock);
return hbq_buf;
}
}
+ spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
"1803 Bad hbq tag. Data: x%x x%x\n",
tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1071,8 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
if (hbq_buffer) {
hbqno = hbq_buffer->tag >> 16;
- if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
- }
}
}
@@ -1317,6 +1374,45 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
return &hbq_entry->dbuf;
}
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+ uint32_t fch_type)
+{
+ int i;
+
+ /* unSolicited Responses */
+ if (pring->prt[0].profile) {
+ if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+ (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+ saveq);
+ return 1;
+ }
+ /* We must search, based on rctl / type
+ for the right routine */
+ for (i = 0; i < pring->num_mask; i++) {
+ if ((pring->prt[i].rctl == fch_r_ctl) &&
+ (pring->prt[i].type == fch_type)) {
+ if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (phba, pring, saveq);
+ return 1;
+ }
+ }
+ return 0;
+}
/**
* lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1435,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
IOCB_t * irsp;
WORD5 * w5p;
uint32_t Rctl, Type;
- uint32_t match, i;
+ uint32_t match;
struct lpfc_iocbq *iocbq;
struct lpfc_dmabuf *dmzbuf;
@@ -1482,35 +1578,12 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
}
- /* unSolicited Responses */
- if (pring->prt[0].profile) {
- if (pring->prt[0].lpfc_sli_rcv_unsol_event)
- (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
- saveq);
- match = 1;
- } else {
- /* We must search, based on rctl / type
- for the right routine */
- for (i = 0; i < pring->num_mask; i++) {
- if ((pring->prt[i].rctl == Rctl)
- && (pring->prt[i].type == Type)) {
- if (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (phba, pring, saveq);
- match = 1;
- break;
- }
- }
- }
- if (match == 0) {
- /* Unexpected Rctl / Type received */
- /* Ring <ringno> handler: unexpected
- Rctl <Rctl> Type <Type> received */
+ if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0313 Ring %d handler: unexpected Rctl x%x "
"Type x%x received\n",
pring->ringno, Rctl, Type);
- }
+
return 1;
}
@@ -1552,6 +1625,37 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
}
/**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+ struct lpfc_iocbq *cmd_iocb;
+
+ if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+ cmd_iocb = phba->sli.iocbq_lookup[iotag];
+ list_del_init(&cmd_iocb->list);
+ pring->txcmplq_cnt--;
+ return cmd_iocb;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0372 iotag x%x is out off range: max iotag (x%x)\n",
+ iotag, phba->sli.last_iotag);
+ return NULL;
+}
+
+/**
* lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2058,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
+ phba->lpfc_rampdown_queue_depth(phba);
spin_lock_irqsave(&phba->hbalock, iflag);
}
@@ -2068,39 +2172,215 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *rspiocbp)
+{
+ struct lpfc_iocbq *saveq;
+ struct lpfc_iocbq *cmdiocbp;
+ struct lpfc_iocbq *next_iocb;
+ IOCB_t *irsp = NULL;
+ uint32_t free_saveq;
+ uint8_t iocb_cmd_type;
+ lpfc_iocb_type type;
+ unsigned long iflag;
+ int rc;
+
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* First add the response iocb to the countinueq list */
+ list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+ pring->iocb_continueq_cnt++;
+
+ /* Now, determine whetehr the list is completed for processing */
+ irsp = &rspiocbp->iocb;
+ if (irsp->ulpLe) {
+ /*
+ * By default, the driver expects to free all resources
+ * associated with this iocb completion.
+ */
+ free_saveq = 1;
+ saveq = list_get_first(&pring->iocb_continueq,
+ struct lpfc_iocbq, list);
+ irsp = &(saveq->iocb);
+ list_del_init(&pring->iocb_continueq);
+ pring->iocb_continueq_cnt = 0;
+
+ pring->stats.iocb_rsp++;
+
+ /*
+ * If resource errors reported from HBA, reduce
+ * queuedepths of the SCSI device.
+ */
+ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ phba->lpfc_rampdown_queue_depth(phba);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ }
+
+ if (irsp->ulpStatus) {
+ /* Rsp ring <ringno> error: IOCB */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0328 Rsp Ring %d error: "
+ "IOCB Data: "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x\n",
+ pring->ringno,
+ irsp->un.ulpWord[0],
+ irsp->un.ulpWord[1],
+ irsp->un.ulpWord[2],
+ irsp->un.ulpWord[3],
+ irsp->un.ulpWord[4],
+ irsp->un.ulpWord[5],
+ *(((uint32_t *) irsp) + 6),
+ *(((uint32_t *) irsp) + 7),
+ *(((uint32_t *) irsp) + 8),
+ *(((uint32_t *) irsp) + 9),
+ *(((uint32_t *) irsp) + 10),
+ *(((uint32_t *) irsp) + 11),
+ *(((uint32_t *) irsp) + 12),
+ *(((uint32_t *) irsp) + 13),
+ *(((uint32_t *) irsp) + 14),
+ *(((uint32_t *) irsp) + 15));
+ }
+
+ /*
+ * Fetch the IOCB command type and call the correct completion
+ * routine. Solicited and Unsolicited IOCBs on the ELS ring
+ * get freed back to the lpfc_iocb_list by the discovery
+ * kernel thread.
+ */
+ iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+ type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+ switch (type) {
+ case LPFC_SOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ break;
+
+ case LPFC_UNSOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (!rc)
+ free_saveq = 0;
+ break;
+
+ case LPFC_ABORT_IOCB:
+ cmdiocbp = NULL;
+ if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+ cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+ saveq);
+ if (cmdiocbp) {
+ /* Call the specified completion routine */
+ if (cmdiocbp->iocb_cmpl) {
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
+ (cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+ saveq);
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
+ } else
+ __lpfc_sli_release_iocbq(phba,
+ cmdiocbp);
+ }
+ break;
+
+ case LPFC_UNKNOWN_IOCB:
+ if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+ char adaptermsg[LPFC_MAX_ADPTMSG];
+ memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+ memcpy(&adaptermsg[0], (uint8_t *)irsp,
+ MAX_MSG_DATA);
+ dev_warn(&((phba->pcidev)->dev),
+ "lpfc%d: %s\n",
+ phba->brd_no, adaptermsg);
+ } else {
+ /* Unknown IOCB command */
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0335 Unknown IOCB "
+ "command Data: x%x "
+ "x%x x%x x%x\n",
+ irsp->ulpCommand,
+ irsp->ulpStatus,
+ irsp->ulpIoTag,
+ irsp->ulpContext);
+ }
+ break;
+ }
+
+ if (free_saveq) {
+ list_for_each_entry_safe(rspiocbp, next_iocb,
+ &saveq->list, list) {
+ list_del(&rspiocbp->list);
+ __lpfc_sli_release_iocbq(phba, rspiocbp);
+ }
+ __lpfc_sli_release_iocbq(phba, saveq);
+ }
+ rspiocbp = NULL;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
*
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
**/
-int
+void
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
+ phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
struct lpfc_pgp *pgp;
IOCB_t *entry;
IOCB_t *irsp = NULL;
struct lpfc_iocbq *rspiocbp = NULL;
- struct lpfc_iocbq *next_iocb;
- struct lpfc_iocbq *cmdiocbp;
- struct lpfc_iocbq *saveq;
- uint8_t iocb_cmd_type;
- lpfc_iocb_type type;
- uint32_t status, free_saveq;
uint32_t portRspPut, portRspMax;
- int rc = 1;
unsigned long iflag;
+ uint32_t status;
pgp = &phba->port_gp[pring->ringno];
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2408,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
- return 1;
+ return;
}
rmb();
@@ -2173,138 +2453,10 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
- list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
- pring->iocb_continueq_cnt++;
- if (irsp->ulpLe) {
- /*
- * By default, the driver expects to free all resources
- * associated with this iocb completion.
- */
- free_saveq = 1;
- saveq = list_get_first(&pring->iocb_continueq,
- struct lpfc_iocbq, list);
- irsp = &(saveq->iocb);
- list_del_init(&pring->iocb_continueq);
- pring->iocb_continueq_cnt = 0;
-
- pring->stats.iocb_rsp++;
-
- /*
- * If resource errors reported from HBA, reduce
- * queuedepths of the SCSI device.
- */
- if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
- spin_lock_irqsave(&phba->hbalock, iflag);
- }
-
- if (irsp->ulpStatus) {
- /* Rsp ring <ringno> error: IOCB */
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "0328 Rsp Ring %d error: "
- "IOCB Data: "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x\n",
- pring->ringno,
- irsp->un.ulpWord[0],
- irsp->un.ulpWord[1],
- irsp->un.ulpWord[2],
- irsp->un.ulpWord[3],
- irsp->un.ulpWord[4],
- irsp->un.ulpWord[5],
- *(((uint32_t *) irsp) + 6),
- *(((uint32_t *) irsp) + 7),
- *(((uint32_t *) irsp) + 8),
- *(((uint32_t *) irsp) + 9),
- *(((uint32_t *) irsp) + 10),
- *(((uint32_t *) irsp) + 11),
- *(((uint32_t *) irsp) + 12),
- *(((uint32_t *) irsp) + 13),
- *(((uint32_t *) irsp) + 14),
- *(((uint32_t *) irsp) + 15));
- }
-
- /*
- * Fetch the IOCB command type and call the correct
- * completion routine. Solicited and Unsolicited
- * IOCBs on the ELS ring get freed back to the
- * lpfc_iocb_list by the discovery kernel thread.
- */
- iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
- type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
- if (type == LPFC_SOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_sol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- } else if (type == LPFC_UNSOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_unsol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- if (!rc)
- free_saveq = 0;
- } else if (type == LPFC_ABORT_IOCB) {
- if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
- ((cmdiocbp =
- lpfc_sli_iocbq_lookup(phba, pring,
- saveq)))) {
- /* Call the specified completion
- routine */
- if (cmdiocbp->iocb_cmpl) {
- spin_unlock_irqrestore(
- &phba->hbalock,
- iflag);
- (cmdiocbp->iocb_cmpl) (phba,
- cmdiocbp, saveq);
- spin_lock_irqsave(
- &phba->hbalock,
- iflag);
- } else
- __lpfc_sli_release_iocbq(phba,
- cmdiocbp);
- }
- } else if (type == LPFC_UNKNOWN_IOCB) {
- if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
- char adaptermsg[LPFC_MAX_ADPTMSG];
-
- memset(adaptermsg, 0,
- LPFC_MAX_ADPTMSG);
- memcpy(&adaptermsg[0], (uint8_t *) irsp,
- MAX_MSG_DATA);
- dev_warn(&((phba->pcidev)->dev),
- "lpfc%d: %s\n",
- phba->brd_no, adaptermsg);
- } else {
- /* Unknown IOCB command */
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "0335 Unknown IOCB "
- "command Data: x%x "
- "x%x x%x x%x\n",
- irsp->ulpCommand,
- irsp->ulpStatus,
- irsp->ulpIoTag,
- irsp->ulpContext);
- }
- }
-
- if (free_saveq) {
- list_for_each_entry_safe(rspiocbp, next_iocb,
- &saveq->list, list) {
- list_del(&rspiocbp->list);
- __lpfc_sli_release_iocbq(phba,
- rspiocbp);
- }
- __lpfc_sli_release_iocbq(phba, saveq);
- }
- rspiocbp = NULL;
- }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Handle the response IOCB */
+ rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+ spin_lock_irqsave(&phba->hbalock, iflag);
/*
* If the port response put pointer has not been updated, sync
@@ -2338,7 +2490,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
}
spin_unlock_irqrestore(&phba->hbalock, iflag);
- return rc;
+ return;
}
/**
@@ -2420,7 +2572,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
@@ -2432,8 +2584,8 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
* function returns 1 when HBA fail to restart otherwise returns
* zero.
**/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
{
uint32_t status;
int i = 0;
@@ -2647,7 +2799,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +2835,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
(cfg_value &
~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
- psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+ psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
/* Now toggle INITFF bit in the Host Control Register */
writel(HC_INITFF, phba->HCregaddr);
mdelay(1);
@@ -3289,32 +3442,20 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0345 Resetting board due to mailbox timeout\n");
- /*
- * lpfc_offline calls lpfc_sli_hba_down which will clean up
- * on oustanding mailbox commands.
- */
- /* If resets are disabled then set error state and return. */
- if (!phba->cfg_enable_hba_reset) {
- phba->link_state = LPFC_HBA_ERROR;
- return;
- }
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
- lpfc_online(phba);
- lpfc_unblock_mgmt_io(phba);
- return;
+
+ /* Reset the HBA device */
+ lpfc_reset_hba(phba);
}
/**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
*
* This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
* The mailbox command can be submitted in polling mode, in which case
* this function will wait in a polling loop for the completion of the
* mailbox.
@@ -3332,8 +3473,9 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
* return codes the caller owns the mailbox command after the return of
* the function.
**/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+ uint32_t flag)
{
MAILBOX_t *mb;
struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +3491,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_lock_irqsave(&phba->hbalock, drvr_flag);
if (!pmbox) {
/* processing mbox queue from intr_handler */
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ return MBX_SUCCESS;
+ }
processing_queue = 1;
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +3511,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
lpfc_printf_log(phba, KERN_ERR,
LOG_MBOX | LOG_VPORT,
"1806 Mbox x%x failed. No vport\n",
- pmbox->mb.mbxCommand);
+ pmbox->u.mb.mbxCommand);
dump_stack();
goto out_not_finished;
}
@@ -3385,21 +3531,29 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
psli = &phba->sli;
- mb = &pmbox->mb;
+ mb = &pmbox->u.mb;
status = MBX_SUCCESS;
if (phba->link_state == LPFC_HBA_ERROR) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):0311 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
!(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2528 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3413,14 +3567,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2529 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2530 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3462,12 +3626,17 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
/* If we are not polling, we MUST be in SLI2 mode */
if (flag != MBX_POLL) {
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
(mb->mbxCommand != MBX_KILL_BOARD)) {
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2531 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
/* timeout active mbox command */
@@ -3506,7 +3675,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
/* next set own bit for the adapter and copy over command word */
mb->mbxOwner = OWN_CHIP;
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data to host SLIM area */
lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
} else {
@@ -3529,7 +3698,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* switch over to host mailbox */
- psli->sli_flag |= LPFC_SLI2_ACTIVE;
+ psli->sli_flag |= LPFC_SLI_ACTIVE;
}
}
@@ -3552,7 +3721,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
writel(CA_MBATT, phba->CAregaddr);
readl(phba->CAregaddr); /* flush */
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First read mbox status word */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3591,7 +3760,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_lock_irqsave(&phba->hbalock, drvr_flag);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3604,7 +3773,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (((slimword0 & OWN_CHIP) != OWN_CHIP)
&& slimmb->mbxStatus) {
psli->sli_flag &=
- ~LPFC_SLI2_ACTIVE;
+ ~LPFC_SLI_ACTIVE;
word0 = slimword0;
}
}
@@ -3616,7 +3785,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
ha_copy = readl(phba->HAregaddr);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* copy results back to user */
lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
} else {
@@ -3701,35 +3870,34 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
* @piocb: Pointer to command iocb.
* @flag: Flag indicating if this command can be put into txq.
*
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
*
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
**/
static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
struct lpfc_iocbq *nextiocb;
IOCB_t *iocb;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
if (piocb->iocb_cmpl && (!piocb->vport) &&
(piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +4001,52 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
return IOCB_BUSY;
}
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1419 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+ return 0;
+}
/**
* lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +4062,14 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
* functions which do not hold hbalock.
**/
int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
unsigned long iflags;
int rc;
spin_lock_irqsave(&phba->hbalock, iflags);
- rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
spin_unlock_irqrestore(&phba->hbalock, iflags);
return rc;
@@ -5077,53 +5291,104 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
}
/**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
* @phba: Pointer to HBA context.
*
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
**/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
- struct lpfc_vport *vport = phba->pport;
- int i = 0;
- uint32_t ha_copy;
+ struct lpfc_sli *psli = &phba->sli;
+ uint8_t actcmd = MBX_HEARTBEAT;
+ unsigned long timeout;
- while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
- if (i++ > LPFC_MBOX_TMO * 1000)
- return 1;
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
- /*
- * Call lpfc_sli_handle_mb_event only if a mailbox cmd
- * did finish. This way we won't get the misleading
- * "Stray Mailbox Interrupt" message.
- */
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- ha_copy = phba->work_ha;
- phba->work_ha &= ~HA_MBATT;
+ if (phba->sli.mbox_active)
+ actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
spin_unlock_irq(&phba->hbalock);
+ /* Determine how long we might wait for the active mailbox
+ * command to be gracefully completed by firmware.
+ */
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+ 1000) + jiffies;
+ while (phba->sli.mbox_active) {
+ /* Check active mailbox complete status every 2ms */
+ msleep(2);
+ if (time_after(jiffies, timeout))
+ /* Timeout, let the mailbox flush routine to
+ * forcefully release active mailbox command
+ */
+ break;
+ }
+ }
+ lpfc_sli_mbox_sys_flush(phba);
+}
- if (ha_copy & HA_MBATT)
- if (lpfc_sli_handle_mb_event(phba) == 0)
- i = 0;
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
+ uint32_t ha_copy;
- msleep(1);
- }
+ /* Read chip Host Attention (HA) register */
+ ha_copy = readl(phba->HAregaddr);
+ if (ha_copy & HA_ERATT) {
+ /* Read host status register to retrieve error event */
+ lpfc_sli_read_hs(phba);
- return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
+ /* Set the driver HA work bitmap */
+ spin_lock_irq(&phba->hbalock);
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
+ }
+ return 0;
}
/**
* lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
* error attention register bit for error attention events.
*
* This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +5399,6 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
{
uint32_t ha_copy;
- /* If PCI channel is offline, don't process it */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return 0;
-
/* If somebody is waiting to handle an eratt, don't process it
* here. The brdkill function will do this.
*/
@@ -5161,56 +5422,80 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
return 0;
}
- /* Read chip Host Attention (HA) register */
- ha_copy = readl(phba->HAregaddr);
- if (ha_copy & HA_ERATT) {
- /* Read host status register to retrieve error event */
- lpfc_sli_read_hs(phba);
-
- /* Check if there is a deferred error condition is active */
- if ((HS_FFER1 & phba->work_hs) &&
- ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
- HS_FFER6 | HS_FFER7) & phba->work_hs)) {
- phba->hba_flag |= DEFER_ERATT;
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr);
- }
-
- /* Set the driver HA work bitmap */
- phba->work_ha |= HA_ERATT;
- /* Indicate polling handles this ERATT */
- phba->hba_flag |= HBA_ERATT_HANDLED;
+ /* If PCI channel is offline, don't process it */
+ if (unlikely(pci_channel_offline(phba->pcidev))) {
spin_unlock_irq(&phba->hbalock);
- return 1;
+ return 0;
+ }
+
+ switch (phba->sli_rev) {
+ case LPFC_SLI_REV2:
+ case LPFC_SLI_REV3:
+ /* Read chip Host Attention (HA) register */
+ ha_copy = lpfc_sli_eratt_read(phba);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0299 Invalid SLI revision (%d)\n",
+ phba->sli_rev);
+ ha_copy = 0;
+ break;
}
spin_unlock_irq(&phba->hbalock);
+
+ return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+ /* If the pci channel is offline, ignore all the interrupts */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return -EIO;
+
+ /* Update device level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return -EIO;
+
return 0;
}
/**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
* structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5240,13 +5525,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If the pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for slow-path events */
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +5551,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
* interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
@@ -5434,7 +5714,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
LOG_MBOX | LOG_SLI,
"0350 rc should have"
"been MBX_BUSY");
- goto send_current_mbox;
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
}
}
spin_lock_irqsave(
@@ -5471,29 +5752,29 @@ send_current_mbox:
}
return IRQ_HANDLED;
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
/**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5513,13 +5794,8 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for FCP ring and other ring events */
ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +5806,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
* any interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +5842,27 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
}
}
return IRQ_HANDLED;
-} /* lpfc_fp_intr_handler */
+} /* lpfc_sli_fp_intr_handler */
/**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled, else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +5877,8 @@ lpfc_intr_handler(int irq, void *dev_id)
if (unlikely(!phba))
return IRQ_NONE;
- /* If the pci channel is offline, ignore all the interrupts. */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
-
- /* Update device level interrupt statistics */
- phba->sli.slistat.sli_intr++;
-
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
spin_lock(&phba->hbalock);
@@ -5650,7 +5920,7 @@ lpfc_intr_handler(int irq, void *dev_id)
status2 >>= (4*LPFC_ELS_RING);
if (status1 || (status2 & HA_RXMASK))
- sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+ sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
else
sp_irq_rc = IRQ_NONE;
@@ -5670,10 +5940,10 @@ lpfc_intr_handler(int irq, void *dev_id)
status2 = 0;
if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
- fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+ fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
else
fp_irq_rc = IRQ_NONE;
/* Return device-level interrupt handling status */
return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-} /* lpfc_intr_handler */
+} /* lpfc_sli_intr_handler */