diff options
author | Ingo Molnar <mingo@elte.hu> | 2008-07-25 13:08:16 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-07-25 13:08:16 +0200 |
commit | 10a010f6953b5a14ba2f0be40a4fce1bea220875 (patch) | |
tree | 19aadf718c796bc7fae0a1a1c970d84d67c541d4 /drivers/serial/8250.c | |
parent | 510b37258dfd61693ca6c039865c78bd996e3718 (diff) | |
parent | fb2e405fc1fc8b20d9c78eaa1c7fd5a297efde43 (diff) |
Merge branch 'linus' into x86/x2apic
Conflicts:
drivers/pci/dmar.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/serial/8250.c')
-rw-r--r-- | drivers/serial/8250.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index ce948b66bbd..a97f1ae11f7 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1293,7 +1293,18 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) char flag; do { - ch = serial_inp(up, UART_RX); + if (likely(lsr & UART_LSR_DR)) + ch = serial_inp(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + flag = TTY_NORMAL; up->port.icount.rx++; @@ -1342,7 +1353,7 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) ignore_char: lsr = serial_inp(up, UART_LSR); - } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); spin_unlock(&up->port.lock); tty_flip_buffer_push(tty); spin_lock(&up->port.lock); @@ -1425,7 +1436,7 @@ serial8250_handle_port(struct uart_8250_port *up) DEBUG_INTR("status = %x...", status); - if (status & UART_LSR_DR) + if (status & (UART_LSR_DR | UART_LSR_BI)) receive_chars(up, &status); check_modem_status(up); if (status & UART_LSR_THRE) @@ -1874,7 +1885,9 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock_irqsave(&up->port.lock, flags); + spin_lock(&up->port.lock); + if (up->port.flags & UPF_SHARE_IRQ) + disable_irq_nosync(up->port.irq); wait_for_xmitr(up, UART_LSR_THRE); serial_out_sync(up, UART_IER, UART_IER_THRI); @@ -1886,7 +1899,9 @@ static int serial8250_startup(struct uart_port *port) iir = serial_in(up, UART_IIR); serial_out(up, UART_IER, 0); - spin_unlock_irqrestore(&up->port.lock, flags); + if (up->port.flags & UPF_SHARE_IRQ) + enable_irq(up->port.irq); + spin_unlock(&up->port.lock); /* * If the interrupt is not reasserted, setup a timer to |