Merge branch 'master' of ../mmc

18 files changed, 757 insertions, 475 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 579d63a81aa..b695ab3142d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C24XX
+	depends on ARM && PLAT_S3C
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS
+	int
+	depends on SERIAL_SAMSUNG
+	default 2 if ARCH_S3C2400
+	default 4 if ARCH_S3C64XX || CPU_S3C2443
+	default 3
+	help
+	  Select the number of available UART ports for the Samsung S3C
+	  serial driver
+	
 config SERIAL_SAMSUNG_DEBUG
 	bool "Samsung SoC serial debug"
 	depends on SERIAL_SAMSUNG && DEBUG_LL
@@ -508,7 +518,20 @@ config SERIAL_S3C2440
 	help
 	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
 
+config SERIAL_S3C24A0
+	tristate "Samsung S3C24A0 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C24A0
+	default y if CPU_S3C24A0
+	help
+	  Serial port support for the Samsung S3C24A0 SoC
 
+config SERIAL_S3C6400
+	tristate "Samsung S3C6400/S3C6410 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+	default y
+	help
+	  Serial port support for the Samsung S3C6400 and S3C6410
+	  SoCs
 
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0c17c8ddb19..dfe775ac45b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
+obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
+obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 71562689116..e3a5ad5ef1d 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
 		goto free;
 	}
 
-	uap->clk = clk_get(&dev->dev, "UARTCLK");
+	uap->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
 		goto unmap;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index b7180046f8d..8b2b9700f3e 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto free;
 	}
 
-	uap->clk = clk_get(&dev->dev, "UARTCLK");
+	uap->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
 		goto unmap;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 3f90f1bbbbc..a50954612b6 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -187,11 +187,11 @@
 #define MAX_INTERNAL_IRQ	IMX_IRQS
 #endif
 
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
 #define DEV_NAME		"ttymxc"
-#define MAX_INTERNAL_IRQ	MXC_MAX_INT_LINES
+#define MAX_INTERNAL_IRQ	MXC_INTERNAL_IRQS
 #endif
 
 /*
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 6dd98f9fb89..ae3699d77dd 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2149,7 +2149,7 @@ out4:
 	return ret;
 }
 
-static struct ioc3_submodule ioc3uart_submodule = {
+static struct ioc3_submodule ioc3uart_ops = {
 	.name = "IOC3uart",
 	.probe = ioc3uart_probe,
 	.remove = ioc3uart_remove,
@@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void)
 		       __func__);
 		return ret;
 	}
-	ret = ioc3_register_submodule(&ioc3uart_submodule);
+	ret = ioc3_register_submodule(&ioc3uart_ops);
 	if (ret)
 		uart_unregister_driver(&ioc3_uart);
 	return ret;
@@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void)
 
 static void __devexit ioc3uart_exit(void)
 {
-	ioc3_unregister_submodule(&ioc3uart_submodule);
+	ioc3_unregister_submodule(&ioc3uart_ops);
 	uart_unregister_driver(&ioc3_uart);
 }
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 6117d3db0b6..0c3a2ab1612 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -429,14 +429,24 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
 static void
 mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* Not implemented */
+	if (mctrl & TIOCM_RTS)
+		out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+	else
+		out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
 }
 
 static unsigned int
 mpc52xx_uart_get_mctrl(struct uart_port *port)
 {
-	/* Not implemented */
-	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	unsigned int ret = TIOCM_DSR;
+	u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+
+	if (!(status & MPC52xx_PSC_CTS))
+		ret |= TIOCM_CTS;
+	if (!(status & MPC52xx_PSC_DCD))
+		ret |= TIOCM_CAR;
+
+	return ret;
 }
 
 static void
@@ -479,7 +489,15 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
 static void
 mpc52xx_uart_enable_ms(struct uart_port *port)
 {
-	/* Not implemented */
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+
+	/* clear D_*-bits by reading them */
+	in_8(&psc->mpc52xx_psc_ipcr);
+	/* enable CTS and DCD as IPC interrupts */
+	out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+	port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
 }
 
 static void
@@ -580,6 +598,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 			MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
 			MPC52xx_PSC_MODE_ONE_STOP;
 
+	if (new->c_cflag & CRTSCTS) {
+		mr1 |= MPC52xx_PSC_MODE_RXRTS;
+		mr2 |= MPC52xx_PSC_MODE_TXCTS;
+	}
 
 	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
 	quot = uart_get_divisor(port, baud);
@@ -591,8 +613,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	/* Update the per-port timeout */
 	uart_update_timeout(port, new->c_cflag, baud);
 
-	/* Do our best to flush TX & RX, so we don't loose anything */
-	/* But we don't wait indefinitly ! */
+	/* Do our best to flush TX & RX, so we don't lose anything */
+	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
 	/* FIXME Can't receive chars since set_termios might be called at early
 	 * boot for the console, all stuff is not yet ready to receive at that
@@ -617,6 +639,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	out_8(&psc->ctur, ctr >> 8);
 	out_8(&psc->ctlr, ctr & 0xff);
 
+	if (UART_ENABLE_MS(port, new->c_cflag))
+		mpc52xx_uart_enable_ms(port);
+
 	/* Reenable TX & RX */
 	out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
 	out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
@@ -752,10 +777,15 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 			if (status & MPC52xx_PSC_SR_RB) {
 				flag = TTY_BREAK;
 				uart_handle_break(port);
-			} else if (status & MPC52xx_PSC_SR_PE)
+				port->icount.brk++;
+			} else if (status & MPC52xx_PSC_SR_PE) {
 				flag = TTY_PARITY;
-			else if (status & MPC52xx_PSC_SR_FE)
+				port->icount.parity++;
+			}
+			else if (status & MPC52xx_PSC_SR_FE) {
 				flag = TTY_FRAME;
+				port->icount.frame++;
+			}
 
 			/* Clear error condition */
 			out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
@@ -769,6 +799,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 			 * affect the current character
 			 */
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+			port->icount.overrun++;
 		}
 	}
 
@@ -826,6 +857,7 @@ mpc52xx_uart_int(int irq, void *dev_id)
 	struct uart_port *port = dev_id;
 	unsigned long pass = ISR_PASS_LIMIT;
 	unsigned int keepgoing;
+	u8 status;
 
 	spin_lock(&port->lock);
 
@@ -842,6 +874,13 @@ mpc52xx_uart_int(int irq, void *dev_id)
 		if (psc_ops->tx_rdy(port))
 			keepgoing |= mpc52xx_uart_int_tx_chars(port);
 
+		status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+		if (status & MPC52xx_PSC_D_DCD)
+			uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
+
+		if (status & MPC52xx_PSC_D_CTS)
+			uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
+
 		/* Limit number of iteration */
 		if (!(--pass))
 			keepgoing = 0;
@@ -1109,22 +1148,29 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 		return ret;
 
 	port->mapbase = res.start;
+	if (!port->mapbase) {
+		dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
+		return -EINVAL;
+	}
+
 	port->irq = irq_of_parse_and_map(op->node, 0);
+	if (port->irq == NO_IRQ) {
+		dev_dbg(&op->dev, "Could not get irq\n");
+		return -EINVAL;
+	}
 
 	dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
 		(void *)port->mapbase, port->irq, port->uartclk);
 
-	if ((port->irq == NO_IRQ) || !port->mapbase) {
-		printk(KERN_ERR "Could not allocate resources for PSC\n");
-		return -EINVAL;
-	}
-
 	/* Add the port to the uart sub-system */
 	ret = uart_add_one_port(&mpc52xx_uart_driver, port);
-	if (!ret)
-		dev_set_drvdata(&op->dev, (void *)port);
+	if (ret) {
+		irq_dispose_mapping(port->irq);
+		return ret;
+	}
 
-	return ret;
+	dev_set_drvdata(&op->dev, (void *)port);
+	return 0;
 }
 
 static int
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 317b061f764..ad348850401 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1383,6 +1383,29 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+
+static int pmz_poll_get_char(struct uart_port *port)
+{
+	struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
+		udelay(5);
+	return read_zsdata(uap);
+}
+
+static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+	/* Wait for the transmit buffer to empty. */
+	while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+		udelay(5);
+	write_zsdata(uap, c);
+}
+
+#endif
+
 static struct uart_ops pmz_pops = {
 	.tx_empty	=	pmz_tx_empty,
 	.set_mctrl	=	pmz_set_mctrl,
@@ -1400,6 +1423,10 @@ static struct uart_ops pmz_pops = {
 	.request_port	=	pmz_request_port,
 	.config_port	=	pmz_config_port,
 	.verify_port	=	pmz_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	pmz_poll_get_char,
+	.poll_put_char	=	pmz_poll_put_char,
+#endif
 };
 
 /*
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index abc00be5543..f6e3b86bb0b 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -48,6 +48,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 
 
 struct uart_pxa_port {
@@ -766,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	if (!sport)
 		return -ENOMEM;
 
-	sport->clk = clk_get(&dev->dev, "UARTCLK");
+	sport->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(sport->clk)) {
 		ret = PTR_ERR(sport->clk);
 		goto err_free;
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 317d239ab74..29cbb0afef8 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit);
 
 MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPLi v2");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
new file mode 100644
index 00000000000..ebf2fd3c8f7
--- /dev/null
+++ b/drivers/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk") == 0)
+		ucon |= S3C2410_UCON_UCLK;
+	else
+		ucon &= ~S3C2410_UCON_UCLK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+	return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	wr_regl(port, S3C2410_UCON,  cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+	.name		= "Samsung S3C24A0 UART",
+	.type		= PORT_S3C2410,
+	.fifosize	= 16,
+	.rx_fifomask	= S3C24A0_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C24A0_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C24A0_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C24A0_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C24A0_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C24A0_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c24a0_serial_getsource,
+	.set_clksrc	= s3c24a0_serial_setsource,
+	.reset_port	= s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_drv = {
+	.probe		= s3c24a0_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c24a0-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+	platform_driver_unregister(&s3c24a0_serial_drv);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 00000000000..06936d13393
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk0") == 0) {
+		ucon &= ~S3C6400_UCON_CLKMASK;
+		ucon |= S3C6400_UCON_UCLK0;
+	} else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S3C6400_UCON_UCLK1;
+	else if (strcmp(clk->name, "pclk") == 0) {
+		/* See notes about transitioning from UCLK to PCLK */
+		ucon &= ~S3C6400_UCON_UCLK0;
+	} else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S3C6400_UCON_CLKMASK) {
+	case S3C6400_UCON_UCLK0:
+		clk->name = "uclk0";
+		break;
+
+	case S3C6400_UCON_UCLK1:
+		clk->name = "uclk1";
+		break;
+
+	case S3C6400_UCON_PCLK:
+	case S3C6400_UCON_PCLK2:
+		clk->name = "pclk";
+		break;
+	}
+
+	return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	/* ensure we don't change the clock settings... */
+
+	ucon &= S3C6400_UCON_CLKMASK;
+
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+	.name		= "Samsung S3C6400 UART",
+	.type		= PORT_S3C6400,
+	.fifosize	= 64,
+	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c6400_serial_getsource,
+	.set_clksrc	= s3c6400_serial_setsource,
+	.reset_port	= s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+	dbg("s3c6400_serial_probe: dev=%p\n", dev);
+	return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+	.probe		= s3c6400_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c6400-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+	platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d035..41ac94872b8 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,13 +42,14 @@
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <asm/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
@@ -58,19 +59,6 @@
 #define S3C24XX_SERIAL_MAJOR	204
 #define S3C24XX_SERIAL_MINOR	64
 
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
 /* macros to change one thing to another */
 
 #define tx_enabled(port) ((port)->unused[0])
@@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
 
 static void s3c24xx_serial_stop_tx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (tx_enabled(port)) {
-		disable_irq(TX_IRQ(port));
+		disable_irq(ourport->tx_irq);
 		tx_enabled(port) = 0;
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_enable(port);
@@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 
 static void s3c24xx_serial_start_tx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (!tx_enabled(port)) {
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_disable(port);
 
-		enable_irq(TX_IRQ(port));
+		enable_irq(ourport->tx_irq);
 		tx_enabled(port) = 1;
 	}
 }
@@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
 
 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (rx_enabled(port)) {
 		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(RX_IRQ(port));
+		disable_irq(ourport->rx_irq);
 		rx_enabled(port) = 0;
 	}
 }
@@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (ourport->tx_claimed) {
-		free_irq(TX_IRQ(port), ourport);
+		free_irq(ourport->tx_irq, ourport);
 		tx_enabled(port) = 0;
 		ourport->tx_claimed = 0;
 	}
 
 	if (ourport->rx_claimed) {
-		free_irq(RX_IRQ(port), ourport);
+		free_irq(ourport->rx_irq, ourport);
 		ourport->rx_claimed = 0;
 		rx_enabled(port) = 0;
 	}
@@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	rx_enabled(port) = 1;
 
-	ret = request_irq(RX_IRQ(port),
-			  s3c24xx_serial_rx_chars, 0,
+	ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
 
 	if (ret != 0) {
-		printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+		printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
 		return ret;
 	}
 
@@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	tx_enabled(port) = 1;
 
-	ret = request_irq(TX_IRQ(port),
-			  s3c24xx_serial_tx_chars, 0,
+	ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
 
 	if (ret) {
-		printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+		printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
 		goto err;
 	}
 
@@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
+	ourport->pm_level = level;
+
 	switch (level) {
 	case 3:
 		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		ourport->clksrc = clksrc;
 		ourport->baudclk = clk;
+		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
 
 	switch (termios->c_cflag & CSIZE) {
@@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
 		return "S3C2440";
 	case PORT_S3C2412:
 		return "S3C2412";
+	case PORT_S3C6400:
+		return "S3C6400/10";
 	default:
 		return NULL;
 	}
@@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = {
 static struct uart_driver s3c24xx_uart_drv = {
 	.owner		= THIS_MODULE,
 	.dev_name	= "s3c2410_serial",
-	.nr		= 3,
+	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
 	.cons		= S3C24XX_SERIAL_CONSOLE,
 	.driver_name	= S3C24XX_SERIAL_NAME,
 	.major		= S3C24XX_SERIAL_MAJOR,
 	.minor		= S3C24XX_SERIAL_MINOR,
 };
 
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
 	[0] = {
 		.port = {
 			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
@@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 			.line		= 1,
 		}
 	},
-#if NR_PORTS > 2
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
 
 	[2] = {
 		.port = {
@@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 2,
 		}
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[3] = {
+		.port = {
+			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
+			.iotype		= UPIO_MEM,
+			.irq		= IRQ_S3CUART_RX3,
+			.uartclk	= 0,
+			.fifosize	= 16,
+			.ops		= &s3c24xx_serial_ops,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 3,
+		}
 	}
 #endif
 };
@@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
 	return (info->reset_port)(port, cfg);
 }
 
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+					     unsigned long val, void *data)
+{
+	struct s3c24xx_uart_port *port;
+	struct uart_port *uport;
+
+	port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+	uport = &port->port;
+
+	/* check to see if port is enabled */
+
+	if (port->pm_level != 0)
+		return 0;
+
+	/* try and work out if the baudrate is changing, we can detect
+	 * a change in rate, but we do not have support for detecting
+	 * a disturbance in the clock-rate over the change.
+	 */
+
+	if (IS_ERR(port->clk))
+		goto exit;
+
+	if (port->baudclk_rate == clk_get_rate(port->clk))
+		goto exit;
+
+	if (val == CPUFREQ_PRECHANGE) {
+		/* we should really shut the port down whilst the
+		 * frequency change is in progress. */
+
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		struct ktermios *termios;
+		struct tty_struct *tty;
+
+		if (uport->info == NULL)
+			goto exit;
+
+		tty = uport->info->port.tty;
+
+		if (tty == NULL)
+			goto exit;
+
+		termios = tty->termios;
+
+		if (termios == NULL) {
+			printk(KERN_WARNING "%s: no termios?\n", __func__);
+			goto exit;
+		}
+
+		s3c24xx_serial_set_termios(uport, termios, NULL);
+	}
+
+ exit:
+	return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+	return cpufreq_register_notifier(&port->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+	cpufreq_unregister_notifier(&port->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
 /* s3c24xx_serial_init_port
  *
  * initialise a single serial port from the platform device given
@@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	if (port->mapbase != 0)
 		return 0;
 
-	if (cfg->hwport > 3)
-		return -EINVAL;
+	if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
+		printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
+		       cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
+		return -ERANGE;
+	}
 
 	/* setup info for port */
 	port->dev	= &platdev->dev;
@@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
-	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+	port->mapbase = res->start;
+	port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
 	ret = platform_get_irq(platdev, 0);
 	if (ret < 0)
 		port->irq = 0;
-	else
+	else {
 		port->irq = ret;
+		ourport->rx_irq = ret;
+		ourport->tx_irq = ret + 1;
+	}
+	
+	ret = platform_get_irq(platdev, 1);
+	if (ret > 0)
+		ourport->tx_irq = ret;
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
 
-	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
-	    port->mapbase, port->membase, port->irq, port->uartclk);
+	dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+	    port->mapbase, port->membase, port->irq,
+	    ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
@@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 	if (ret < 0)
 		printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
 
+	ret = s3c24xx_serial_cpufreq_register(ourport);
+	if (ret < 0)
+		dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
 	return 0;
 
  probe_err:
@@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
 	if (port) {
+		s3c24xx_serial_cpufreq_deregister(to_ourport(port));
 		device_remove_file(&dev->dev, &dev_attr_clock_source);
 		uart_remove_one_port(&s3c24xx_uart_drv, port);
 	}
@@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 
 	platdev_ptr = s3c24xx_uart_devs;
 
-	for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
 		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
 	}
 
@@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	/* is this a valid port */
 
-	if (co->index == -1 || co->index >= NR_PORTS)
+	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
 		co->index = 0;
 
 	port = &s3c24xx_serial_ports[co->index].port;
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 5c92ebbe7d9..571d6b90d20 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -33,12 +33,21 @@ struct s3c24xx_uart_info {
 struct s3c24xx_uart_port {
 	unsigned char			rx_claimed;
 	unsigned char			tx_claimed;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
 
 	struct s3c24xx_uart_info	*info;
 	struct s3c24xx_uart_clksrc	*clksrc;
 	struct clk			*clk;
 	struct clk			*baudclk;
 	struct uart_port		port;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block		freq_transition;
+#endif
 };
 
 /* conversion functions */
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 61dc8b3daa2..a7bf024a828 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -41,9 +41,10 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
+#include <mach/hardware.h>
 
 #define DEV_MAJOR	204
 #define DEV_MINOR	16
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 165fc010978..557b54ab2f2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -51,7 +51,6 @@
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
-#include <asm/kgdb.h>
 #endif
 
 #include "sh-sci.h"
@@ -65,10 +64,6 @@ struct sci_port {
 	/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
 	unsigned int		irqs[SCIx_NR_IRQS];
 
-	/* Port pin configuration */
-	void			(*init_pins)(struct uart_port *port,
-					     unsigned int cflag);
-
 	/* Port enable callback */
 	void			(*enable)(struct uart_port *port);
 
@@ -85,10 +80,6 @@ struct sci_port {
 #endif
 };
 
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
 static struct sci_port *serial_console_port;
 #endif
@@ -101,21 +92,26 @@ static void sci_stop_tx(struct uart_port *port);
 static struct sci_port sci_ports[SCI_NPORTS];
 static struct uart_driver sci_uart_driver;
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
-    defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+	return container_of(uart, struct sci_port, port);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
 static inline void handle_error(struct uart_port *port)
 {
 	/* Clear error flags */
 	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
 }
 
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
 {
-	unsigned long flags;
 	unsigned short status;
 	int c;
 
-	spin_lock_irqsave(&port->lock, flags);
 	do {
 		status = sci_in(port, SCxSR);
 		if (status & SCxSR_ERRORS(port)) {
@@ -123,23 +119,21 @@ static int get_char(struct uart_port *port)
 			continue;
 		}
 	} while (!(status & SCxSR_RDxF(port)));
+
 	c = sci_in(port, SCxRDR);
-	sci_in(port, SCxSR);            /* Dummy read */
+
+	/* Dummy read */
+	sci_in(port, SCxSR);
 	sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	return c;
 }
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+#endif
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 {
-	unsigned long flags;
 	unsigned short status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	do {
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TDxE(port)));
@@ -147,96 +141,22 @@ static void put_char(struct uart_port *port, char c)
 	sci_in(port, SCxSR);            /* Dummy read */
 	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 	sci_out(port, SCxTDR, c);
-
-	spin_unlock_irqrestore(&port->lock, flags);
 }
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
-	struct uart_port *port = &sci_port->port;
-	const unsigned char *p = buffer;
-	int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-	int checksum;
-	int usegdb=0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-	/* This call only does a trap the first time it is
-	 * called, and so is safe to do here unconditionally
-	 */
-	usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
-	usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
-	if (usegdb) {
-	    /*  $<packet info>#<checksum>. */
-	    do {
-		unsigned char c;
-		put_char(port, '$');
-		put_char(port, 'O'); /* 'O'utput to console */
-		checksum = 'O';
-
-		for (i=0; i<count; i++) { /* Don't use run length encoding */
-			int h, l;
-
-			c = *p++;
-			h = hex_asc_hi(c);
-			l = hex_asc_lo(c);
-			put_char(port, h);
-			put_char(port, l);
-			checksum += h + l;
-		}
-		put_char(port, '#');
-		put_char(port, hex_asc_hi(checksum));
-		put_char(port, hex_asc_lo(checksum));
-	    } while  (get_char(port) != '+');
-	} else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-	for (i=0; i<count; i++) {
-		if (*p == 10)
-			put_char(port, '\r');
-		put_char(port, *p++);
-	}
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
-        int c;
-
-        /* Keep trying to read a character, this could be neater */
-        while ((c = get_char(&kgdb_sci_port->port)) < 0)
-		cpu_relax();
-
-        return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
-        put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 #if defined(__H8300S__)
 enum { sci_disable, sci_enable };
 
-static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 {
-	volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+	volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
 	int ch = (port->mapbase  - SMR0) >> 3;
 	unsigned char mask = 1 << (ch+1);
 
-	if (ctrl == sci_disable) {
+	if (ctrl == sci_disable)
 		*mstpcrl |= mask;
-	} else {
+	else
 		*mstpcrl &= ~mask;
-	}
 }
 
 static inline void h8300_sci_enable(struct uart_port *port)
@@ -251,7 +171,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
 #endif
 
 #if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
 	int ch = (port->mapbase - SMR0) >> 3;
 
@@ -266,141 +186,99 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
 	/* tx mark output*/
 	H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
 }
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	set_sh771x_scif_pfc(port);
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	}
-	sci_out(port, SCFCR, fcr_val);
+	if (port->mapbase == 0xA4400000) {
+		__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+		__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+	} else if (port->mapbase == 0xA4410000)
+		__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (cflag & CRTSCTS) {
 		/* enable RTS/CTS */
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 9-2; enable all scif pins but sck */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xfc03), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xfc03), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 9-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xfc03), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xfc03), PORT_PVCR);
 		}
-		fcr_val |= SCFCR_MCE;
 	} else {
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 5-2; enable only tx and rx  */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xffc3), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xffc3), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 5-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xffc3), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xffc3), PORT_PVCR);
 		}
 	}
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	/* We need to set SCPCR to enable RTS/CTS */
-	data = ctrl_inw(SCPCR);
+	data = __raw_readw(SCPCR);
 	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
-	ctrl_outw(data & 0x0fcf, SCPCR);
+	__raw_writew(data & 0x0fcf, SCPCR);
 
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-	else {
+	if (!(cflag & CRTSCTS)) {
 		/* We need to set SCPCR to enable RTS/CTS */
-		data = ctrl_inw(SCPCR);
+		data = __raw_readw(SCPCR);
 		/* Clear out SCP7MD1,0, SCP4MD1,0,
 		   Set SCP6MD1,0 = {01} (output)  */
-		ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
 
 		data = ctrl_inb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
 		ctrl_outb(data & 0xbf, SCPDR);
 	}
-
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (port->mapbase == 0xffe00000) {
-		data = ctrl_inw(PSCR);
+		data = __raw_readw(PSCR);
 		data &= ~0x03cf;
-		if (cflag & CRTSCTS)
-			fcr_val |= SCFCR_MCE;
-		else
+		if (!(cflag & CRTSCTS))
 			data |= 0x0340;
 
-		ctrl_outw(data, PSCR);
+		__raw_writew(data, PSCR);
 	}
-	/* SCIF1 and SCIF2 should be setup by board code */
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	/* Nothing to do here.. */
-	sci_out(port, SCFCR, 0);
 }
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	} else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
-		/* Nothing */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SHX3)
-		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
 #else
-		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
-	}
-	sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	/* Nothing to do */
 }
 #endif
 
@@ -419,18 +297,26 @@ static inline int scif_rxroom(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 static inline int scif_txroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+	}
 }
 
 static inline int scif_rxroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return sci_in(port, SCRFDR) & 0xff;
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+	}
 }
 #else
 static inline int scif_txroom(struct uart_port *port)
@@ -446,12 +332,12 @@ static inline int scif_rxroom(struct uart_port *port)
 
 static inline int sci_txroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+	return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
 }
 
 static inline int sci_rxroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+	return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
 }
 
 /* ********************************************************************** *
@@ -469,11 +355,10 @@ static void sci_transmit_chars(struct uart_port *port)
 	status = sci_in(port, SCxSR);
 	if (!(status & SCxSR_TDxE(port))) {
 		ctrl = sci_in(port, SCSCR);
-		if (uart_circ_empty(xmit)) {
+		if (uart_circ_empty(xmit))
 			ctrl &= ~SCI_CTRL_FLAGS_TIE;
-		} else {
+		else
 			ctrl |= SCI_CTRL_FLAGS_TIE;
-		}
 		sci_out(port, SCSCR, ctrl);
 		return;
 	}
@@ -521,11 +406,11 @@ static void sci_transmit_chars(struct uart_port *port)
 }
 
 /* On SH3, SCIF may read end-of-break as a space->mark char */
-#define STEPFN(c)  ({int __c=(c); (((__c-1)|(__c)) == -1); })
+#define STEPFN(c)  ({int __c = (c); (((__c-1)|(__c)) == -1); })
 
 static inline void sci_receive_chars(struct uart_port *port)
 {
-	struct sci_port *sci_port = (struct sci_port *)port;
+	struct sci_port *sci_port = to_sci_port(port);
 	struct tty_struct *tty = port->info->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
@@ -550,13 +435,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 
 		if (port->type == PORT_SCI) {
 			char c = sci_in(port, SCxRDR);
-			if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
+			if (uart_handle_sysrq_char(port, c) ||
+			    sci_port->break_flag)
 				count = 0;
-			else {
+			else
 				tty_insert_flip_char(tty, c, TTY_NORMAL);
-			}
 		} else {
-			for (i=0; i<count; i++) {
+			for (i = 0; i < count; i++) {
 				char c = sci_in(port, SCxRDR);
 				status = sci_in(port, SCxSR);
 #if defined(CONFIG_CPU_SH3)
@@ -569,7 +454,7 @@ static inline void sci_receive_chars(struct uart_port *port)
 					}
 
 					/* Nonzero => end-of-break */
-					pr_debug("scif: debounce<%02x>\n", c);
+					dev_dbg(port->dev, "debounce<%02x>\n", c);
 					sci_port->break_flag = 0;
 
 					if (STEPFN(c)) {
@@ -586,12 +471,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 				/* Store data and status */
 				if (status&SCxSR_FER(port)) {
 					flag = TTY_FRAME;
-					pr_debug("sci: frame error\n");
+					dev_notice(port->dev, "frame error\n");
 				} else if (status&SCxSR_PER(port)) {
 					flag = TTY_PARITY;
-					pr_debug("sci: parity error\n");
+					dev_notice(port->dev, "parity error\n");
 				} else
 					flag = TTY_NORMAL;
+
 				tty_insert_flip_char(tty, c, flag);
 			}
 		}
@@ -651,13 +537,14 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* overrun error */
 		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
 			copied++;
-		pr_debug("sci: overrun error\n");
+
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
 		if (sci_rxd_in(port) == 0) {
 			/* Notify of BREAK */
-			struct sci_port *sci_port = (struct sci_port *)port;
+			struct sci_port *sci_port = to_sci_port(port);
 
 			if (!sci_port->break_flag) {
 				sci_port->break_flag = 1;
@@ -666,15 +553,19 @@ static inline int sci_handle_errors(struct uart_port *port)
 				/* Do sysrq handling. */
 				if (uart_handle_break(port))
 					return 0;
-			        pr_debug("sci: BREAK detected\n");
+
+				dev_dbg(port->dev, "BREAK detected\n");
+
 				if (tty_insert_flip_char(tty, 0, TTY_BREAK))
-				        copied++;
-                       }
+					copied++;
+			}
+
 		} else {
 			/* frame error */
 			if (tty_insert_flip_char(tty, 0, TTY_FRAME))
 				copied++;
-			pr_debug("sci: frame error\n");
+
+			dev_notice(port->dev, "frame error\n");
 		}
 	}
 
@@ -682,7 +573,8 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* parity error */
 		if (tty_insert_flip_char(tty, 0, TTY_PARITY))
 			copied++;
-		pr_debug("sci: parity error\n");
+
+		dev_notice(port->dev, "parity error");
 	}
 
 	if (copied)
@@ -691,6 +583,27 @@ static inline int sci_handle_errors(struct uart_port *port)
 	return copied;
 }
 
+static inline int sci_handle_fifo_overrun(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+	int copied = 0;
+
+	if (port->type != PORT_SCIF)
+		return 0;
+
+	if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+		sci_out(port, SCLSR, 0);
+
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		tty_flip_buffer_push(tty);
+
+		dev_notice(port->dev, "overrun error\n");
+		copied++;
+	}
+
+	return copied;
+}
+
 static inline int sci_handle_breaks(struct uart_port *port)
 {
 	int copied = 0;
@@ -709,23 +622,15 @@ static inline int sci_handle_breaks(struct uart_port *port)
 		/* Notify of BREAK */
 		if (tty_insert_flip_char(tty, 0, TTY_BREAK))
 			copied++;
-		pr_debug("sci: BREAK detected\n");
-	}
 
-#if defined(SCIF_ORER)
-	/* XXX: Handle SCIF overrun error */
-	if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-		sci_out(port, SCLSR, 0);
-		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
-			copied++;
-			pr_debug("sci: overrun error\n");
-		}
+		dev_dbg(port->dev, "BREAK detected\n");
 	}
-#endif
 
 	if (copied)
 		tty_flip_buffer_push(tty);
 
+	copied += sci_handle_fifo_overrun(port);
+
 	return copied;
 }
 
@@ -763,16 +668,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 			sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
 		}
 	} else {
-#if defined(SCIF_ORER)
-		if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-			struct tty_struct *tty = port->info->port.tty;
-
-			sci_out(port, SCLSR, 0);
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-			tty_flip_buffer_push(tty);
-			pr_debug("scif: overrun error\n");
-		}
-#endif
+		sci_handle_fifo_overrun(port);
 		sci_rx_interrupt(irq, ptr);
 	}
 
@@ -801,8 +697,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
-        ssr_status = sci_in(port,SCxSR);
-        scr_status = sci_in(port,SCSCR);
+	ssr_status = sci_in(port, SCxSR);
+	scr_status = sci_in(port, SCSCR);
 
 	/* Tx Interrupt */
 	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -820,7 +716,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	return ret;
 }
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -828,41 +724,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
 			unsigned long phase, void *p)
 {
-	struct cpufreq_freqs *freqs = p;
 	int i;
 
 	if ((phase == CPUFREQ_POSTCHANGE) ||
-	    (phase == CPUFREQ_RESUMECHANGE)){
+	    (phase == CPUFREQ_RESUMECHANGE))
 		for (i = 0; i < SCI_NPORTS; i++) {
-			struct uart_port *port = &sci_ports[i].port;
-			struct clk *clk;
-
-			/*
-			 * Update the uartclk per-port if frequency has
-			 * changed, since it will no longer necessarily be
-			 * consistent with the old frequency.
-			 *
-			 * Really we want to be able to do something like
-			 * uart_change_speed() or something along those lines
-			 * here to implicitly reset the per-port baud rate..
-			 *
-			 * Clean this up later..
-			 */
-			clk = clk_get(NULL, "module_clk");
-			port->uartclk = clk_get_rate(clk);
-			clk_put(clk);
+			struct sci_port *s = &sci_ports[i];
+			s->port.uartclk = clk_get_rate(s->clk);
 		}
 
-		printk(KERN_INFO "%s: got a postchange notification "
-		       "for cpu %d (old %d, new %d)\n",
-		       __func__, freqs->cpu, freqs->old, freqs->new);
-	}
-
 	return NOTIFY_OK;
 }
 
 static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
+#endif
 
 static int sci_request_irq(struct sci_port *port)
 {
@@ -875,23 +750,22 @@ static int sci_request_irq(struct sci_port *port)
 			       "SCI Transmit Data Empty", "SCI Break" };
 
 	if (port->irqs[0] == port->irqs[1]) {
-		if (!port->irqs[0]) {
-			printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+		if (unlikely(!port->irqs[0]))
 			return -ENODEV;
-		}
 
 		if (request_irq(port->irqs[0], sci_mpxed_interrupt,
 				IRQF_DISABLED, "sci", port)) {
-			printk(KERN_ERR "sci: Cannot allocate irq.\n");
+			dev_err(port->port.dev, "Can't allocate IRQ\n");
 			return -ENODEV;
 		}
 	} else {
 		for (i = 0; i < ARRAY_SIZE(handlers); i++) {
-			if (!port->irqs[i])
+			if (unlikely(!port->irqs[i]))
 				continue;
+
 			if (request_irq(port->irqs[i], handlers[i],
 					IRQF_DISABLED, desc[i], port)) {
-				printk(KERN_ERR "sci: Cannot allocate irq.\n");
+				dev_err(port->port.dev, "Can't allocate IRQ\n");
 				return -ENODEV;
 			}
 		}
@@ -904,12 +778,9 @@ static void sci_free_irq(struct sci_port *port)
 {
 	int i;
 
-        if (port->irqs[0] == port->irqs[1]) {
-                if (!port->irqs[0])
-                        printk("sci: sci_free_irq error\n");
-		else
-                        free_irq(port->irqs[0], port);
-        } else {
+	if (port->irqs[0] == port->irqs[1])
+		free_irq(port->irqs[0], port);
+	else {
 		for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
 			if (!port->irqs[i])
 				continue;
@@ -1028,7 +899,6 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	struct sci_port *s = &sci_ports[port->line];
 	unsigned int status, baud, smr_val;
 	int t = -1;
 
@@ -1060,32 +930,36 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_out(port, SCSMR, smr_val);
 
 	if (t > 0) {
-		if(t >= 256) {
+		if (t >= 256) {
 			sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
 			t >>= 2;
-		} else {
+		} else
 			sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
-		}
+
 		sci_out(port, SCBRR, t);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	}
 
-	if (likely(s->init_pins))
-		s->init_pins(port, termios->c_cflag);
+	sci_init_pins(port, termios->c_cflag);
+	sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
 
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
 	if ((termios->c_cflag & CREAD) != 0)
-              sci_start_rx(port,0);
+		sci_start_rx(port, 0);
 }
 
 static const char *sci_type(struct uart_port *port)
 {
 	switch (port->type) {
-		case PORT_SCI:	return "sci";
-		case PORT_SCIF:	return "scif";
-		case PORT_IRDA: return "irda";
-		case PORT_SCIFA:	return "scifa";
+	case PORT_IRDA:
+		return "irda";
+	case PORT_SCI:
+		return "sci";
+	case PORT_SCIF:
+		return "scif";
+	case PORT_SCIFA:
+		return "scifa";
 	}
 
 	return NULL;
@@ -1108,19 +982,6 @@ static void sci_config_port(struct uart_port *port, int flags)
 
 	port->type = s->type;
 
-	switch (port->type) {
-	case PORT_SCI:
-		s->init_pins = sci_init_pins_sci;
-		break;
-	case PORT_SCIF:
-	case PORT_SCIFA:
-		s->init_pins = sci_init_pins_scif;
-		break;
-	case PORT_IRDA:
-		s->init_pins = sci_init_pins_irda;
-		break;
-	}
-
 	if (port->flags & UPF_IOREMAP && !port->membase) {
 #if defined(CONFIG_SUPERH64)
 		port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
@@ -1129,7 +990,7 @@ static void sci_config_port(struct uart_port *port, int flags)
 		port->membase = ioremap_nocache(port->mapbase, 0x40);
 #endif
 
-		printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+		dev_err(port->dev, "can't remap port#%d\n", port->line);
 	}
 }
 
@@ -1163,6 +1024,10 @@ static struct uart_ops sci_uart_ops = {
 	.request_port	= sci_request_port,
 	.config_port	= sci_config_port,
 	.verify_port	= sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= sci_poll_get_char,
+	.poll_put_char	= sci_poll_put_char,
+#endif
 };
 
 static void __init sci_init_ports(void)
@@ -1229,7 +1094,15 @@ int __init early_sci_setup(struct uart_port *port)
 static void serial_console_write(struct console *co, const char *s,
 				 unsigned count)
 {
-	put_string(serial_console_port, s, count);
+	struct uart_port *port = &serial_console_port->port;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (*s == 10)
+			sci_poll_put_char(port, '\r');
+
+		sci_poll_put_char(port, *s++);
+	}
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
@@ -1307,89 +1180,8 @@ static int __init sci_console_init(void)
 console_initcall(sci_console_init);
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * FIXME: Most of this can go away.. at the moment, we rely on
- * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
- * most of that can easily be done here instead.
- *
- * For the time being, just accept the values that were parsed earlier..
- */
-static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
-					    int *parity, int *bits)
-{
-	*baud = kgdb_baud;
-	*parity = tolower(kgdb_parity);
-	*bits = kgdb_bits - '0';
-}
-
-/*
- * The naming here is somewhat misleading, since kgdb_console_setup() takes
- * care of the early-on initialization for kgdb, regardless of whether we
- * actually use kgdb as a console or not.
- *
- * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
- */
-int __init kgdb_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port = &sci_ports[kgdb_portnum].port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index != kgdb_portnum)
-		co->index = kgdb_portnum;
-
-	kgdb_sci_port = &sci_ports[co->index];
-	port = &kgdb_sci_port->port;
-
-	/*
-	 * Also need to check port->type, we don't actually have any
-	 * UPIO_PORT ports, but uart_report_port() handily misreports
-	 * it anyways if we don't have a port available by the time this is
-	 * called.
-	 */
-	if (!port->type)
-		return -ENODEV;
-	if (!port->membase || !port->mapbase)
-		return -ENODEV;
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		kgdb_console_get_options(port, &baud, &parity, &bits);
-
-	kgdb_getchar = kgdb_sci_getchar;
-	kgdb_putchar = kgdb_sci_putchar;
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console kgdb_console = {
-	.name		= "ttySC",
-	.device		= uart_console_device,
-	.write		= kgdb_console_write,
-	.setup		= kgdb_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &sci_uart_driver,
-};
-
-/* Register the KGDB console so we get messages (d'oh!) */
-static int __init kgdb_console_init(void)
-{
-	sci_init_ports();
-	register_console(&kgdb_console);
-	return 0;
-}
-console_initcall(kgdb_console_init);
-#endif /* CONFIG_SH_KGDB_CONSOLE */
-
-#if defined(CONFIG_SH_KGDB_CONSOLE)
-#define SCI_CONSOLE	&kgdb_console
-#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-#define SCI_CONSOLE	&serial_console
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE	(&serial_console)
 #else
 #define SCI_CONSOLE	0
 #endif
@@ -1463,15 +1255,8 @@ static int __devinit sci_probe(struct platform_device *dev)
 		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
-#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
-	kgdb_sci_port	= &sci_ports[kgdb_portnum];
-	kgdb_getchar	= kgdb_sci_getchar;
-	kgdb_putchar	= kgdb_sci_putchar;
-#endif
-
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-	dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
@@ -1491,6 +1276,10 @@ static int __devexit sci_remove(struct platform_device *dev)
 {
 	int i;
 
+#ifdef CONFIG_HAVE_CLK
+	cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
 	for (i = 0; i < SCI_NPORTS; i++)
 		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
 
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 9f33b064172..38c600c0dbb 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,13 +133,20 @@
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
 # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# if defined(CONFIG_CPU_SUBTYPE_SH7201)
+#  define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
+#  define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
+#  define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
+#  define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
+# endif
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
@@ -225,6 +232,10 @@
 # define SCIF_TXROOM_MAX 16
 #endif
 
+#ifndef SCIF_ORER
+#define SCIF_ORER	0x0000
+#endif
+
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 #define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
@@ -232,12 +243,7 @@
 #define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
-#else
-# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-#endif
+#define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER	 : SCIF_ORER)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
@@ -501,18 +507,6 @@ static inline int sci_rxd_in(struct uart_port *port)
 {
 	  return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
 }
-static inline void set_sh771x_scif_pfc(struct uart_port *port)
-{
-	if (port->mapbase == 0xA4400000){
-		ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
-		ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
-		return;
-	}
-	if (port->mapbase == 0xA4410000){
-		ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
-		return;
-	}
-}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -664,7 +658,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -677,6 +672,16 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9800)
 		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+	if (port->mapbase == 0xfffeA000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeA800)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeB000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeB800)
+		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#endif
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 6a3f8fb0c9d..3317148a4b9 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
-	pr_debug("ulite console: port=%p; port->mapbase=%x\n",
-		 port, port->mapbase);
+	pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+		 port, (unsigned long long) port->mapbase);
 
 	if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 		dev_err(port->dev, "Memory region busy\n");