[ARM] S3C24A0: Serial port definitions and driver support.

Add serial support for S3C24A0, based on current S3C2410
UART driver. It adds necessary new defines in regs-serial.h
for S3C24A0 and the code to support this device in
drivers/serial/s3c24a0.c

Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

4 files changed, 126 insertions, 2 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c94d3c4b752..db04b87ca8d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -508,7 +508,12 @@ config SERIAL_S3C2440
 	help
 	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
 
-
+config SERIAL_S3C24A0
+	tristate "Samsung S3C24A0 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C24A0
+	default y if CPU_S3C24A0
+	help
+	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0c17c8ddb19..7769aece54c 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
+obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
new file mode 100644
index 00000000000..ebf2fd3c8f7
--- /dev/null
+++ b/drivers/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk") == 0)
+		ucon |= S3C2410_UCON_UCLK;
+	else
+		ucon &= ~S3C2410_UCON_UCLK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+	return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	wr_regl(port, S3C2410_UCON,  cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+	.name		= "Samsung S3C24A0 UART",
+	.type		= PORT_S3C2410,
+	.fifosize	= 16,
+	.rx_fifomask	= S3C24A0_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C24A0_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C24A0_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C24A0_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C24A0_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C24A0_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c24a0_serial_getsource,
+	.set_clksrc	= s3c24a0_serial_setsource,
+	.reset_port	= s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_drv = {
+	.probe		= s3c24a0_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c24a0-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+	platform_driver_unregister(&s3c24a0_serial_drv);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d035..a31db8fae18 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -60,7 +60,7 @@
 
 /* we can support 3 uarts, but not always use them */
 
-#ifdef CONFIG_CPU_S3C2400
+#if defined(CONFIG_CPU_S3C2400) || defined(CONFIG_CPU_S3C24A0)
 #define NR_PORTS (2)
 #else
 #define NR_PORTS (3)