Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  genetlink: fix netns vs. netlink table locking (2)
  3c59x: Get rid of "Trying to free already-free IRQ"
  tunnel: eliminate recursion field
  ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2
  net: fix htmldocs sunrpc, clnt.c
  Phonet: error on broadcast sending (unimplemented)
  Phonet: fix race for port number in concurrent bind()
  pktgen: better scheduler friendliness
  pktgen: T_TERMINATE flag is unused
  ipv4: check optlen for IP_MULTICAST_IF option
  ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.
  iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx
  ath9k: Fix RFKILL bugs
  drivers/net/wireless: Use usb_endpoint_dir_out
  cfg80211: don't overwrite privacy setting
  wl12xx: fix kconfig/link errors
  rt2x00: fix the definition of rt2x00crypto_rx_insert_iv
  iwlwifi: reduce noise when skb allocation fails
  iwlwifi: do not send sync command while holding spinlock
  mac80211: fix DTIM setting
  ...

1 files changed, 0 insertions, 417 deletions

diff --git a/drivers/staging/cpc-usb/cpc.h b/drivers/staging/cpc-usb/cpc.h
deleted file mode 100644
index b2fda5d14c1..00000000000
--- a/drivers/staging/cpc-usb/cpc.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * CPC CAN Interface Definitions
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef CPC_HEADER
-#define CPC_HEADER
-
-/*
- * the maximum length of the union members within a CPC_MSG
- * this value can be defined by the customer, but has to be
- * >= 64 bytes
- * however, if not defined before, we set a length of 64 byte
- */
-#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
-#undef CPC_MSG_LEN
-#define CPC_MSG_LEN 64
-#endif
-
-/*
- * Transmission of events from CPC interfaces to PC can be individually
- * controlled per event type. Default state is: don't transmit
- * Control values are constructed by bit-or of Subject and Action
- * and passed to CPC_Control()
- */
-
-/* Control-Values for CPC_Control() Command Subject Selection */
-#define CONTR_CAN_Message 0x04
-#define CONTR_Busload	  0x08
-#define	CONTR_CAN_State	  0x0C
-#define	CONTR_SendAck	  0x10
-#define	CONTR_Filter	  0x14
-#define CONTR_CmdQueue    0x18	/* reserved, do not use */
-#define CONTR_BusError    0x1C
-
-/* Control Command Actions */
-#define CONTR_CONT_OFF    0
-#define CONTR_CONT_ON     1
-#define CONTR_SING_ON     2
-/*
- * CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
- * read as: transmit at least once
- */
-
-/* defines for confirmed request */
-#define DO_NOT_CONFIRM 0
-#define DO_CONFIRM     1
-
-/* event flags */
-#define EVENT_READ 0x01
-#define EVENT_WRITE 0x02
-
-/*
- * Messages from CPC to PC contain a message object type field.
- * The following message types are sent by CPC and can be used in
- * handlers, others should be ignored.
- */
-#define CPC_MSG_T_RESYNC        0 /* Normally to be ignored */
-#define CPC_MSG_T_CAN           1 /* CAN data frame */
-#define CPC_MSG_T_BUSLOAD       2 /* Busload message */
-#define CPC_MSG_T_STRING        3 /* Normally to be ignored */
-#define CPC_MSG_T_CONTI         4 /* Normally to be ignored */
-#define CPC_MSG_T_MEM           7 /* Normally not to be handled */
-#define	CPC_MSG_T_RTR           8 /* CAN remote frame */
-#define CPC_MSG_T_TXACK	        9 /* Send acknowledge */
-#define CPC_MSG_T_POWERUP      10 /* Power-up message */
-#define	CPC_MSG_T_CMD_NO       11 /* Normally to be ignored */
-#define	CPC_MSG_T_CAN_PRMS     12 /* Actual CAN parameters */
-#define	CPC_MSG_T_ABORTED      13 /* Command aborted message */
-#define	CPC_MSG_T_CANSTATE     14 /* CAN state message */
-#define CPC_MSG_T_RESET        15 /* used to reset CAN-Controller */
-#define	CPC_MSG_T_XCAN         16 /* XCAN data frame */
-#define CPC_MSG_T_XRTR         17 /* XCAN remote frame */
-#define CPC_MSG_T_INFO         18 /* information strings */
-#define CPC_MSG_T_CONTROL      19 /* used for control of interface/driver behaviour */
-#define CPC_MSG_T_CONFIRM      20 /* response type for confirmed requests */
-#define CPC_MSG_T_OVERRUN      21 /* response type for overrun conditions */
-#define CPC_MSG_T_KEEPALIVE    22 /* response type for keep alive conditions */
-#define CPC_MSG_T_CANERROR     23 /* response type for bus error conditions */
-#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */
-#define CPC_MSG_T_ERR_COUNTER  25 /* RX/TX error counter of CAN controller */
-
-#define CPC_MSG_T_FIRMWARE    100 /* response type for USB firmware download */
-
-/*
- * Messages from the PC to the CPC interface contain a command field
- * Most of the command types are wrapped by the library functions and have therefore
- * normally not to be used.
- * However, programmers who wish to circumvent the library and talk directly
- * to the drivers (mainly Linux programmers) can use the following
- * command types:
- */
-#define CPC_CMD_T_CAN                 1	/* CAN data frame */
-#define CPC_CMD_T_CONTROL             3	/* used for control of interface/driver behaviour */
-#define	CPC_CMD_T_CAN_PRMS            6	/* set CAN parameters */
-#define	CPC_CMD_T_CLEARBUF            8	/* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */
-#define	CPC_CMD_T_INQ_CAN_PARMS      11	/* inquire actual CAN parameters */
-#define	CPC_CMD_T_FILTER_PRMS        12	/* set filter parameter */
-#define	CPC_CMD_T_RTR                13	/* CAN remote frame */
-#define	CPC_CMD_T_CANSTATE           14	/* CAN state message */
-#define	CPC_CMD_T_XCAN               15	/* XCAN data frame */
-#define CPC_CMD_T_XRTR               16	/* XCAN remote frame */
-#define CPC_CMD_T_RESET              17	/* used to reset CAN-Controller */
-#define CPC_CMD_T_INQ_INFO           18	/* miscellanous information strings */
-#define CPC_CMD_T_OPEN_CHAN          19	/* open a channel */
-#define CPC_CMD_T_CLOSE_CHAN         20	/* close a channel */
-#define CPC_CMD_T_CNTBUF             21	/* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */
-#define CPC_CMD_T_CAN_EXIT          200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */
-
-#define CPC_CMD_T_INQ_MSG_QUEUE_CNT  CPC_CMD_T_CNTBUF   /* inquires the count of elements in the message queue */
-#define CPC_CMD_T_INQ_ERR_COUNTER    25	                /* request the CAN controllers error counter */
-#define	CPC_CMD_T_CLEAR_MSG_QUEUE    CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */
-#define	CPC_CMD_T_CLEAR_CMD_QUEUE    28	                /* clear CPC_CMD queue */
-#define CPC_CMD_T_FIRMWARE          100                 /* reserved, must not be used */
-#define CPC_CMD_T_USB_RESET         101                 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_NOTIFY       102                 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_SETUP        103                 /* reserved, must not be used */
-#define	CPC_CMD_T_ABORT             255                 /* Normally not to be used */
-
-/* definitions for CPC_MSG_T_INFO information sources */
-#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
-#define CPC_INFOMSG_T_INTERFACE      1
-#define CPC_INFOMSG_T_DRIVER         2
-#define CPC_INFOMSG_T_LIBRARY        3
-
-/* information types */
-#define CPC_INFOMSG_T_UNKNOWN_TYPE   0
-#define CPC_INFOMSG_T_VERSION        1
-#define CPC_INFOMSG_T_SERIAL         2
-
-/* definitions for controller types */
-#define PCA82C200   1 /* Philips basic CAN controller, replaced by SJA1000 */
-#define SJA1000     2 /* Philips basic CAN controller */
-#define AN82527     3 /* Intel full CAN controller */
-#define M16C_BASIC  4 /* M16C controller running in basic CAN (not full CAN) mode */
-
-/* channel open error codes */
-#define CPC_ERR_NO_FREE_CHANNEL            -1	/* no more free space within the channel array */
-#define CPC_ERR_CHANNEL_ALREADY_OPEN       -2	/* the channel is already open */
-#define CPC_ERR_CHANNEL_NOT_ACTIVE         -3	/* access to a channel not active failed */
-#define CPC_ERR_NO_DRIVER_PRESENT          -4	/* no driver at the location searched by the library */
-#define CPC_ERR_NO_INIFILE_PRESENT         -5	/* the library could not find the inifile */
-#define CPC_ERR_WRONG_PARAMETERS           -6	/* wrong parameters in the inifile */
-#define CPC_ERR_NO_INTERFACE_PRESENT       -7	/* 1. The specified interface is not connected */
-						/* 2. The interface (mostly CPC-USB) was disconnected upon operation */
-#define CPC_ERR_NO_MATCHING_CHANNEL        -8	/* the driver couldn't find a matching channel */
-#define CPC_ERR_NO_BUFFER_AVAILABLE        -9	/* the driver couldn't allocate buffer for messages */
-#define CPC_ERR_NO_INTERRUPT               -10	/* the requested interrupt couldn't be claimed */
-#define CPC_ERR_NO_MATCHING_INTERFACE      -11	/* no interface type related to this channel was found */
-#define CPC_ERR_NO_RESOURCES               -12	/* the requested resources could not be claimed */
-#define CPC_ERR_SOCKET                     -13	/* error concerning TCP sockets */
-
-/* init error codes */
-#define CPC_ERR_WRONG_CONTROLLER_TYPE      -14	/* wrong CAN controller type within initialization */
-#define CPC_ERR_NO_RESET_MODE              -15	/* the controller could not be set into reset mode */
-#define CPC_ERR_NO_CAN_ACCESS              -16	/* the CAN controller could not be accessed */
-
-/* transmit error codes */
-#define CPC_ERR_CAN_WRONG_ID               -20	/* the provided CAN id is too big */
-#define CPC_ERR_CAN_WRONG_LENGTH           -21	/* the provided CAN length is too long */
-#define CPC_ERR_CAN_NO_TRANSMIT_BUF        -22	/* the transmit buffer was occupied */
-#define CPC_ERR_CAN_TRANSMIT_TIMEOUT       -23	/* The message could not be sent within a */
-						/* specified time */
-
-/* other error codes */
-#define CPC_ERR_SERVICE_NOT_SUPPORTED      -30	/* the requested service is not supported by the interface */
-#define CPC_ERR_IO_TRANSFER                -31	/* a transmission error down to the driver occurred */
-#define CPC_ERR_TRANSMISSION_FAILED        -32	/* a transmission error down to the interface occurred */
-#define CPC_ERR_TRANSMISSION_TIMEOUT       -33	/* a timeout occurred within transmission to the interface */
-#define CPC_ERR_OP_SYS_NOT_SUPPORTED       -35	/* the operating system is not supported */
-#define CPC_ERR_UNKNOWN                    -40	/* an unknown error ocurred (mostly IOCTL errors) */
-
-#define CPC_ERR_LOADING_DLL                -50	/* the library 'cpcwin.dll' could not be loaded */
-#define CPC_ERR_ASSIGNING_FUNCTION         -51	/* the specified function could not be assigned */
-#define CPC_ERR_DLL_INITIALIZATION         -52	/* the DLL was not initialized correctly */
-#define CPC_ERR_MISSING_LICFILE            -55	/* the file containing the licenses does not exist */
-#define CPC_ERR_MISSING_LICENSE            -56	/* a required license was not found */
-
-/* CAN state bit values. Ignore any bits not listed */
-#define CPC_CAN_STATE_BUSOFF     0x80
-#define CPC_CAN_STATE_ERROR      0x40
-
-/* Mask to help ignore undefined bits */
-#define CPC_CAN_STATE_MASK       0xc0
-
-/*
- * CAN-Message representation in a CPC_MS
- * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
- * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
- */
-typedef struct CPC_CAN_MSG {
-	u32 id;
-	u8 length;
-	u8 msg[8];
-} CPC_CAN_MSG_T;
-
-/* representation of the CAN parameters for the PCA82C200 controller */
-typedef struct CPC_PCA82C200_PARAMS {
-	u8 acc_code;	/* Acceptance-code for receive, Standard: 0 */
-	u8 acc_mask;	/* Acceptance-mask for receive, Standard: 0xff (everything) */
-	u8 btr0;	/* Bus-timing register 0 */
-	u8 btr1;	/* Bus-timing register 1 */
-	u8 outp_contr;	/* Output-control register */
-} CPC_PCA82C200_PARAMS_T;
-
-/* representation of the CAN parameters for the SJA1000 controller */
-typedef struct CPC_SJA1000_PARAMS {
-	u8 mode;	/* enables single or dual acceptance filtering */
-	u8 acc_code0;	/* Acceptance-code for receive, Standard: 0 */
-	u8 acc_code1;
-	u8 acc_code2;
-	u8 acc_code3;
-	u8 acc_mask0;	/* Acceptance-mask for receive, Standard: 0xff (everything) */
-	u8 acc_mask1;
-	u8 acc_mask2;
-	u8 acc_mask3;
-	u8 btr0;	/* Bus-timing register 0 */
-	u8 btr1;	/* Bus-timing register 1 */
-	u8 outp_contr;	/* Output-control register */
-} CPC_SJA1000_PARAMS_T;
-
-/*
- * representation of the CAN parameters for the M16C controller
- * in basic CAN mode (means no full CAN)
- */
-typedef struct CPC_M16C_BASIC_PARAMS {
-	u8 con0;
-	u8 con1;
-	u8 ctlr0;
-	u8 ctlr1;
-	u8 clk;
-	u8 acc_std_code0;
-	u8 acc_std_code1;
-	u8 acc_ext_code0;
-	u8 acc_ext_code1;
-	u8 acc_ext_code2;
-	u8 acc_ext_code3;
-	u8 acc_std_mask0;
-	u8 acc_std_mask1;
-	u8 acc_ext_mask0;
-	u8 acc_ext_mask1;
-	u8 acc_ext_mask2;
-	u8 acc_ext_mask3;
-} CPC_M16C_BASIC_PARAMS_T;
-
-/* CAN params message representation */
-typedef struct CPC_CAN_PARAMS {
-	u8 cc_type;	/* represents the controller type */
-	union {
-		CPC_M16C_BASIC_PARAMS_T m16c_basic;
-		CPC_SJA1000_PARAMS_T sja1000;
-		CPC_PCA82C200_PARAMS_T pca82c200;
-	} cc_params;
-} CPC_CAN_PARAMS_T;
-
-/* CHAN init params representation */
-typedef struct CPC_CHAN_PARAMS {
-	int fd;
-} CPC_CHAN_PARAMS_T;
-
-/* CAN init params message representation */
-typedef struct CPC_INIT_PARAMS {
-	CPC_CHAN_PARAMS_T chanparams;
-	CPC_CAN_PARAMS_T canparams;
-} CPC_INIT_PARAMS_T;
-
-/* structure for confirmed message handling */
-typedef struct CPC_CONFIRM {
-	u8 result; /* error code */
-} CPC_CONFIRM_T;
-
-/* structure for information requests */
-typedef struct CPC_INFO {
-	u8 source;                 /* interface, driver or library */
-	u8 type;                   /* version or serial number */
-	char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */
-} CPC_INFO_T;
-
-/*
- * OVERRUN
- * In general two types of overrun may occur.
- * A hardware overrun, where the CAN controller
- * lost a message, because the interrupt was
- * not handled before the next messgae comes in.
- * Or a software overrun, where i.e. a received
- * message could not be stored in the CPC_MSG
- * buffer.
- */
-
-/* After a software overrun has occurred
- * we wait until we have CPC_OVR_GAP slots
- * free in the CPC_MSG buffer.
- */
-#define CPC_OVR_GAP               10
-
-/*
- * Two types of software overrun may occur.
- * A received CAN message or a CAN state event
- * can cause an overrun.
- * Note: A CPC_CMD which would normally store
- * its result immediately in the CPC_MSG
- * queue may fail, because the message queue is full.
- * This will not generate an overrun message, but
- * will halt command execution, until this command
- * is able to store its message in the message queue.
- */
-#define CPC_OVR_EVENT_CAN       0x01
-#define CPC_OVR_EVENT_CANSTATE  0x02
-#define CPC_OVR_EVENT_BUSERROR  0x04
-
-/*
- * If the CAN controller lost a message
- * we indicate it with the highest bit
- * set in the count field.
- */
-#define CPC_OVR_HW              0x80
-
-/* structure for overrun conditions */
-typedef struct {
-	u8 event;
-	u8 count;
-} CPC_OVERRUN_T;
-
-/*
- * CAN errors
- * Each CAN controller type has different
- * registers to record errors.
- * Therefor a structure containing the specific
- * errors is set up for each controller here
- */
-
-/*
- * SJA1000 error structure
- * see the SJA1000 datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_SJA1000_CAN_ERROR {
-	u8 ecc;   /* error capture code register */
-	u8 rxerr; /* RX error counter register */
-	u8 txerr; /* TX error counter register */
-} CPC_SJA1000_CAN_ERROR_T;
-
-/*
- * M16C error structure
- * see the M16C datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_M16C_CAN_ERROR {
-	u8 tbd;	/* to be defined */
-} CPC_M16C_CAN_ERROR_T;
-
-/* structure for CAN error conditions */
-#define  CPC_CAN_ECODE_ERRFRAME   0x01
-typedef struct CPC_CAN_ERROR {
-	u8 ecode;
-	struct {
-		u8 cc_type; /* CAN controller type */
-		union {
-			CPC_SJA1000_CAN_ERROR_T sja1000;
-			CPC_M16C_CAN_ERROR_T m16c;
-		} regs;
-	} cc;
-} CPC_CAN_ERROR_T;
-
-/*
- * Structure containing RX/TX error counter.
- * This structure is used to request the
- * values of the CAN controllers TX and RX
- * error counter.
- */
-typedef struct CPC_CAN_ERR_COUNTER {
-	u8 rx;
-	u8 tx;
-} CPC_CAN_ERR_COUNTER_T;
-
-/* If this flag is set, transmissions from PC to CPC are protected against loss */
-#define CPC_SECURE_TO_CPC	0x01
-
-/* If this flag is set, transmissions from CPC to PC are protected against loss */
-#define CPC_SECURE_TO_PC	0x02
-
-/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */
-#define CPC_SECURE_SEND		0x04
-
-/*
- * If this flag is set, the transmission complete flag is checked
- * after sending a message
- * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
- */
-#define CPC_SECURE_TRANSMIT	0x08
-
-/* main message type used between library and application */
-typedef struct CPC_MSG {
-	u8 type;	/* type of message */
-	u8 length;	/* length of data within union 'msg' */
-	u8 msgid;	/* confirmation handle */
-	u32 ts_sec;	/* timestamp in seconds */
-	u32 ts_nsec;	/* timestamp in nano seconds */
-	union {
-		u8 generic[CPC_MSG_LEN];
-		CPC_CAN_MSG_T canmsg;
-		CPC_CAN_PARAMS_T canparams;
-		CPC_CONFIRM_T confirmation;
-		CPC_INFO_T info;
-		CPC_OVERRUN_T overrun;
-		CPC_CAN_ERROR_T error;
-		CPC_CAN_ERR_COUNTER_T err_counter;
-		u8 busload;
-		u8 canstate;
-	} msg;
-} CPC_MSG_T;
-
-#endif /* CPC_HEADER */