staging: remove aten2011 driver

This driver is not needed, as the existing mos7840 driver works
properly for this device.

Thanks to Russell Lang for doing the work to figure this out.

Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 0 insertions, 2451 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 348bf61a8fe..975ecddbce3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig"
 
 source "drivers/staging/stlc45xx/Kconfig"
 
-source "drivers/staging/uc2322/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8d61d7b4deb..2241ae1b21e 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
 obj-$(CONFIG_STLC45XX)		+= stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= uc2322/
 obj-$(CONFIG_B3DFG)		+= b3dfg/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/
diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig
deleted file mode 100644
index 2e0c6e79df2..00000000000
--- a/drivers/staging/uc2322/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config USB_SERIAL_ATEN2011
-	tristate "ATEN 2011 USB to serial device support"
-	depends on USB_SERIAL
-	default N
-	---help---
-	  Say Y here if you want to use a ATEN 2011 dual port USB to serial
-	  adapter.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called aten2011.
diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile
deleted file mode 100644
index 49c18d6e579..00000000000
--- a/drivers/staging/uc2322/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= aten2011.o
diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO
deleted file mode 100644
index c189a64c418..00000000000
--- a/drivers/staging/uc2322/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
-	- checkpatch.pl cleanups
-	- remove dead and useless code (auditing the tty ioctls to
-	  verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
deleted file mode 100644
index 39d0926d1a9..00000000000
--- a/drivers/staging/uc2322/aten2011.c
+++ /dev/null
@@ -1,2430 +0,0 @@
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1		0x3A	/* Zero_Flag_Reg1 58 */
-#define ZLP_REG2		0x3B	/* Zero_Flag_Reg2 59 */
-#define ZLP_REG3		0x3C	/* Zero_Flag_Reg3 60 */
-#define ZLP_REG4		0x3D	/* Zero_Flag_Reg4 61 */
-#define ZLP_REG5		0x3E	/* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines	*/
-#define SERIAL_IIR_RLS		0x06
-#define SERIAL_IIR_RDA		0x04
-#define SERIAL_IIR_CTI		0x0c
-#define SERIAL_IIR_THR		0x02
-#define SERIAL_IIR_MS		0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER.  */
-#define SERIAL_LSR_DR		0x0001
-#define SERIAL_LSR_OE		0x0002
-#define SERIAL_LSR_PE		0x0004
-#define SERIAL_LSR_FE		0x0008
-#define SERIAL_LSR_BI		0x0010
-#define SERIAL_LSR_THRE		0x0020
-#define SERIAL_LSR_TEMT		0x0040
-#define SERIAL_LSR_FIFOERR	0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS	0x10
-#define ATEN_MSR_DELTA_DSR	0x20
-#define ATEN_MSR_DELTA_RI	0x40
-#define ATEN_MSR_DELTA_CD	0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER		((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER	((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER	((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER	((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER		((__u16)(0x02))
-#define LINE_CONTROL_REGISTER		((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER		((__u16)(0x04))
-#define LINE_STATUS_REGISTER		((__u16)(0x05))
-#define MODEM_STATUS_REGISTER		((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER		((__u16)(0x07))
-#define DIVISOR_LATCH_LSB		((__u16)(0x00))
-#define DIVISOR_LATCH_MSB		((__u16)(0x01))
-
-#define SP1_REGISTER			((__u16)(0x00))
-#define CONTROL1_REGISTER		((__u16)(0x01))
-#define CLK_MULTI_REGISTER		((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER	((__u16)(0x03))
-#define DCR1_REGISTER			((__u16)(0x04))
-#define GPIO_REGISTER			((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB			((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS			16	/* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size  */
-
-#define USB_VENDOR_ID_ATENINTL		0x0557
-#define ATENINTL_DEVICE_ID_2011		0x2011
-#define ATENINTL_DEVICE_ID_7820		0x7820
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
-	{ } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
-	int		port_num;          /*Actual port number in the device(1,2,etc)*/
-	__u8		bulk_out_endpoint;   	/* the bulk out endpoint handle */
-	unsigned char	*bulk_out_buffer;     	/* buffer used for the bulk out endpoint */
-	struct urb	*write_urb;	     	/* write URB for this port */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;	/* the buffer we use for the bulk in endpoint */
-	struct urb	*read_urb;	     	/* read URB for this port */
-	__u8		shadowLCR;		/* last LCR value received */
-	__u8		shadowMCR;		/* last MCR value received */
-	char		open;
-	char		chaseResponsePending;
-	wait_queue_head_t	wait_chase;		/* for handling sleeping while waiting for chase to finish */
-	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
-	struct async_icount	icount;
-	struct usb_serial_port	*port;			/* loop back to the owner of this object */
-	/*Offsets*/
-	__u8		SpRegOffset;
-	__u8		ControlRegOffset;
-	__u8		DcrRegOffset;
-	/* for processing control URBS in interrupt context */
-	struct urb 	*control_urb;
-	char		*ctrl_buf;
-	int		MsrLsr;
-
-	struct urb	*write_urb_pool[NUM_URBS];
-	/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
-	struct ktermios	tmp_termios;        /* stores the old termios settings */
-	spinlock_t 	lock;                   /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
-	__u8		interrupt_in_endpoint;		/* the interrupt endpoint handle */
-	unsigned char	*interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
-	struct urb	*interrupt_read_urb;	/* our interrupt urb */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;		/* the buffer we use for the bulk in endpoint */
-	struct urb 	*read_urb;		/* our bulk read urb */
-	__u8		bulk_out_endpoint;	/* the bulk out endpoint handle */
-	struct usb_serial	*serial;	/* loop back to the owner of this object */
-	int	ATEN2011_spectrum_2or4ports; 	/* this says the number of ports in the device */
-	/* Indicates about the no.of opened ports of an individual USB-serial adapater. */
-	unsigned int	NoOfOpenPorts;
-	/* a flag for Status endpoint polling */
-	unsigned char	status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5		0x00	/* 5 bits/char */
-#define LCR_BITS_6		0x01	/* 6 bits/char */
-#define LCR_BITS_7		0x02	/* 7 bits/char */
-#define LCR_BITS_8		0x03	/* 8 bits/char */
-#define LCR_BITS_MASK		0x03	/* Mask for bits/char field */
-
-#define LCR_STOP_1		0x00	/* 1 stop bit */
-#define LCR_STOP_1_5		0x04	/* 1.5 stop bits (if 5   bits/char) */
-#define LCR_STOP_2		0x04	/* 2 stop bits   (if 6-8 bits/char) */
-#define LCR_STOP_MASK		0x04	/* Mask for stop bits field */
-
-#define LCR_PAR_NONE		0x00	/* No parity */
-#define LCR_PAR_ODD		0x08	/* Odd parity */
-#define LCR_PAR_EVEN		0x18	/* Even parity */
-#define LCR_PAR_MARK		0x28	/* Force parity bit to 1 */
-#define LCR_PAR_SPACE		0x38	/* Force parity bit to 0 */
-#define LCR_PAR_MASK		0x38	/* Mask for parity field */
-
-#define LCR_SET_BREAK		0x40	/* Set Break condition */
-#define LCR_DL_ENABLE		0x80	/* Enable access to divisor latch */
-
-#define MCR_DTR			0x01	/* Assert DTR */
-#define MCR_RTS			0x02	/* Assert RTS */
-#define MCR_OUT1		0x04	/* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE		0x08	/* Enable interrupt outputs */
-#define MCR_LOOPBACK		0x10	/* Set internal (digital) loopback mode */
-#define MCR_XON_ANY		0x20	/* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS	0x10	/* Current state of CTS */
-#define ATEN2011_MSR_DSR	0x20	/* Current state of DSR */
-#define ATEN2011_MSR_RI		0x40	/* Current state of RI */
-#define ATEN2011_MSR_CD		0x80	/* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT	(50)	/* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE		0xC0
-#define ATEN_WR_RTYPE		0x40
-#define ATEN_RDREQ		0x0D
-#define ATEN_WRREQ		0x0E
-#define ATEN_CTRL_TIMEOUT	500
-#define VENDOR_READ_LENGTH	(0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	val = val & 0x00ff;
-
-	dbg("%s: is %x, value %x", __func__, reg, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret;
-
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	dbg("%s: offset is %x, return val %x", __func__, reg, *val);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	val = val & 0x00ff;
-
-	/*
-	 * For the UART control registers,
-	 * the application number need to be Or'ed
-	 */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		val |= (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			val |= (((__u16)port->number - minor) + 1) << 8;
-		else
-			val |= (((__u16)port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret = 0;
-	__u16 wval;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor = port->serial->minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* wval is same as application number */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		wval = (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			wval = (((__u16) port->number - minor) + 1) << 8;
-		else
-			wval = (((__u16) port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, wval);
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount *icount;
-	ATEN2011_port = port;
-	icount = &ATEN2011_port->icount;
-	if (newMsr &
-	    (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
-	     ATEN_MSR_DELTA_CD)) {
-		icount = &ATEN2011_port->icount;
-
-		/* update input line counters */
-		if (newMsr & ATEN_MSR_DELTA_CTS)
-			icount->cts++;
-		if (newMsr & ATEN_MSR_DELTA_DSR)
-			icount->dsr++;
-		if (newMsr & ATEN_MSR_DELTA_CD)
-			icount->dcd++;
-		if (newMsr & ATEN_MSR_DELTA_RI)
-			icount->rng++;
-	}
-
-	return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
-	struct async_icount *icount;
-
-	dbg("%s - %02x", __func__, newLsr);
-
-	if (newLsr & SERIAL_LSR_BI) {
-		/*
-		 * Parity and Framing errors only count if they occur exclusive
-		 * of a break being received.
-		 */
-		newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
-	}
-
-	/* update input line counters */
-	icount = &port->icount;
-	if (newLsr & SERIAL_LSR_BI)
-		icount->brk++;
-	if (newLsr & SERIAL_LSR_OE)
-		icount->overrun++;
-	if (newLsr & SERIAL_LSR_PE)
-		icount->parity++;
-	if (newLsr & SERIAL_LSR_FE)
-		icount->frame++;
-
-	return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
-	unsigned char *data;
-	struct ATENINTL_port *ATEN2011_port;
-	__u8 regval = 0x0;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s urb buffer size is %d", __func__, urb->actual_length);
-	dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
-		ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
-	data = urb->transfer_buffer;
-	regval = (__u8) data[0];
-	dbg("%s data is %x", __func__, regval);
-	if (ATEN2011_port->MsrLsr == 0)
-		handle_newMsr(ATEN2011_port, regval);
-	else if (ATEN2011_port->MsrLsr == 1)
-		handle_newLsr(ATEN2011_port, regval);
-
-exit:
-	return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
-			    __u16 *val)
-{
-	struct usb_device *dev = ATEN->port->serial->dev;
-	struct usb_ctrlrequest *dr = NULL;
-	unsigned char *buffer = NULL;
-	int ret = 0;
-	buffer = (__u8 *) ATEN->ctrl_buf;
-
-	dr = (void *)(buffer + 2);
-	dr->bRequestType = ATEN_RD_RTYPE;
-	dr->bRequest = ATEN_RDREQ;
-	dr->wValue = cpu_to_le16(Wval);
-	dr->wIndex = cpu_to_le16(reg);
-	dr->wLength = cpu_to_le16(2);
-
-	usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
-			     (unsigned char *)dr, buffer, 2,
-			     ATEN2011_control_callback, ATEN);
-	ATEN->control_urb->transfer_buffer_length = 2;
-	ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
-	return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
-	int result;
-	int length;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct usb_serial *serial;
-	__u16 Data;
-	unsigned char *data;
-	__u8 sp[5], st;
-	int i;
-	__u16 wval;
-	int minor;
-
-	dbg("%s", " : Entering");
-
-	ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-	length = urb->actual_length;
-	data = urb->transfer_buffer;
-
-	serial = ATEN2011_serial->serial;
-
-	/* ATENINTL get 5 bytes
-	 * Byte 1 IIR Port 1 (port.number is 0)
-	 * Byte 2 IIR Port 2 (port.number is 1)
-	 * Byte 3 IIR Port 3 (port.number is 2)
-	 * Byte 4 IIR Port 4 (port.number is 3)
-	 * Byte 5 FIFO status for both */
-
-	if (length && length > 5) {
-		dbg("%s", "Wrong data !!!");
-		return;
-	}
-
-	/* MATRIX */
-	if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[1];
-		sp[2] = (__u8) data[2];
-		sp[3] = (__u8) data[3];
-		st = (__u8) data[4];
-	} else {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[2];
-		/* sp[2]=(__u8)data[2]; */
-		/* sp[3]=(__u8)data[3]; */
-		st = (__u8) data[4];
-
-	}
-	for (i = 0; i < serial->num_ports; i++) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		minor = serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-		    && (i != 0))
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 2) << 8;
-		else
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 1) << 8;
-		if (ATEN2011_port->open != 0) {
-			if (sp[i] & 0x01) {
-				dbg("SP%d No Interrupt !!!", i);
-			} else {
-				switch (sp[i] & 0x0f) {
-				case SERIAL_IIR_RLS:
-					dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
-					ATEN2011_port->MsrLsr = 1;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 LINE_STATUS_REGISTER,
-							 &Data);
-					break;
-				case SERIAL_IIR_MS:
-					dbg("Serial Port %d: Modem status change", i);
-					ATEN2011_port->MsrLsr = 0;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 MODEM_STATUS_REGISTER,
-							 &Data);
-					break;
-				}
-			}
-		}
-
-	}
-exit:
-	if (ATEN2011_serial->status_polling_started == 0)
-		return;
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&urb->dev->dev,
-			"%s - Error %d submitting interrupt urb\n",
-			__func__, result);
-	}
-
-	return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
-	int status;
-	unsigned char *data;
-	struct usb_serial *serial;
-	struct usb_serial_port *port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero read bulk status received: %d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-	serial = port->serial;
-
-	dbg("%s", "Entering...");
-
-	data = urb->transfer_buffer;
-	ATEN2011_serial = usb_get_serial_data(serial);
-
-	if (urb->actual_length) {
-		tty = tty_port_tty_get(&ATEN2011_port->port->port);
-		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
-
-		ATEN2011_port->icount.rx += urb->actual_length;
-		dbg("ATEN2011_port->icount.rx is %d:",
-			ATEN2011_port->icount.rx);
-	}
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status)
-			dbg("usb_submit_urb(read bulk) failed, status = %d", status);
-	}
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero write bulk status received:%d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s", "Entering .........");
-
-	tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
-	if (tty && ATEN2011_port->open)
-		/* tell the tty driver that something has changed */
-		tty_wakeup(tty);
-
-	/* schedule_work(&ATEN2011_port->port->work); */
-	tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
-				 const struct usb_device_id *id)
-{
-
-	/*need to implement the mode_reg reading and updating\
-	   structures usb_serial_ device_type\
-	   (i.e num_ports, num_bulkin,bulkout etc) */
-	/* Also we can update the changes  attach */
-	return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
-			 struct file *filp)
-{
-	int response;
-	int j;
-	struct usb_serial *serial;
-	struct urb *urb;
-	__u16 Data;
-	int status;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ktermios tmp_termios;
-	int minor;
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL)
-		return -ENODEV;
-
-	/* increment the number of opened ports counter here */
-	ATEN2011_serial->NoOfOpenPorts++;
-
-	usb_clear_halt(serial->dev, port->write_urb->pipe);
-	usb_clear_halt(serial->dev, port->read_urb->pipe);
-
-	/* Initialising the write urb pool */
-	for (j = 0; j < NUM_URBS; ++j) {
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->write_urb_pool[j] = urb;
-
-		if (urb == NULL) {
-			err("No more urbs???");
-			continue;
-		}
-
-		urb->transfer_buffer = NULL;
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			err("%s-out of memory for urb buffers.", __func__);
-			continue;
-		}
-	}
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Spreg failed");
-		return -1;
-	}
-	Data |= 0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-	Data &= ~0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
-	if (RS485mode == 0)
-		Data = 0xC0;
-	else
-		Data = 0x00;
-	status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Controlreg failed");
-		return -1;
-	}
-	Data |= 0x08;		/* Driver done bit */
-	Data |= 0x20;		/* rx_disable */
-	status = 0;
-	status =
-	    set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Controlreg failed");
-		return -1;
-	}
-	/*
-	 * do register settings here
-	 * Set all regs to the device default values.
-	 * First Disable all interrupts.
-	 */
-
-	Data = 0x00;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-	if (status < 0) {
-		dbg("disableing interrupts failed");
-		return -1;
-	}
-	/* Set FIFO_CONTROL_REGISTER to the default value */
-	Data = 0x00;
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0xcf;		/* chk */
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0x03;		/* LCR_BITS_8 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data = 0x0b;		/* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x0c;
-	status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-	Data = 0x0;
-	status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/*      Data = ATEN2011_port->shadowLCR; */	/* data latch disable */
-	Data = Data & ~SERIAL_LCR_DLAB;
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-#endif
-	/* clearing Bulkin and Bulkout Fifo */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
-	Data = Data | 0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
-	Data = Data & ~0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	/* Finally enable all interrupts */
-	Data = 0x0;
-	Data = 0x0c;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	/* clearing rx_disable */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data & ~0x20;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/* rx_negate */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data | 0x10;
-	status = 0;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/*
-	 * Check to see if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the structures
-	 * were not set up at that time.)
-	 */
-	if (ATEN2011_serial->NoOfOpenPorts == 1) {
-		/* start the status polling here */
-		ATEN2011_serial->status_polling_started = 1;
-		/* If not yet set, Set here */
-		ATEN2011_serial->interrupt_in_buffer =
-		    serial->port[0]->interrupt_in_buffer;
-		ATEN2011_serial->interrupt_in_endpoint =
-		    serial->port[0]->interrupt_in_endpointAddress;
-		ATEN2011_serial->interrupt_read_urb =
-		    serial->port[0]->interrupt_in_urb;
-
-		/* set up interrupt urb */
-		usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
-				 serial->dev,
-				 usb_rcvintpipe(serial->dev,
-						ATEN2011_serial->
-						interrupt_in_endpoint),
-				 ATEN2011_serial->interrupt_in_buffer,
-				 ATEN2011_serial->interrupt_read_urb->
-				 transfer_buffer_length,
-				 ATEN2011_interrupt_callback, ATEN2011_serial,
-				 ATEN2011_serial->interrupt_read_urb->interval);
-
-		/* start interrupt read for ATEN2011               *
-		 * will continue as long as ATEN2011 is connected  */
-
-		response =
-		    usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
-				   GFP_KERNEL);
-		if (response) {
-			dbg("%s - Error %d submitting interrupt urb",
-				__func__, response);
-		}
-
-	}
-
-	/*
-	 * See if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the
-	 * structures were not set up at that time.)
-	 */
-
-	dbg("port number is %d", port->number);
-	dbg("serial number is %d", port->serial->minor);
-	dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
-	dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
-	dbg("Interrupt endpoint is %d",
-		port->interrupt_in_endpointAddress);
-	dbg("port's number in the device is %d", ATEN2011_port->port_num);
-	ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
-	ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
-	ATEN2011_port->read_urb = port->read_urb;
-	ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* set up our bulk in urb */
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  (port->
-						   bulk_in_endpointAddress +
-						   2)), port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-	} else
-		usb_fill_bulk_urb(ATEN2011_port->read_urb,
-				  serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  port->
-						  bulk_in_endpointAddress),
-				  port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-
-	dbg("ATEN2011_open: bulkin endpoint is %d",
-		port->bulk_in_endpointAddress);
-	response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
-	if (response) {
-		err("%s - Error %d submitting control urb", __func__,
-		    response);
-	}
-
-	/* initialize our wait queues */
-	init_waitqueue_head(&ATEN2011_port->wait_chase);
-	init_waitqueue_head(&ATEN2011_port->wait_command);
-
-	/* initialize our icount structure */
-	memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
-	/* initialize our port settings */
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;	/* Must set to enable ints! */
-	ATEN2011_port->chaseResponsePending = 0;
-	/* send a open port command */
-	ATEN2011_port->open = 1;
-	/* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
-	/* Setup termios */
-	ATEN2011_set_termios(tty, port, &tmp_termios);
-	ATEN2011_port->icount.tx = 0;
-	ATEN2011_port->icount.rx = 0;
-
-	dbg("usb_serial serial:%x       ATEN2011_port:%x\nATEN2011_serial:%x      usb_serial_port port:%x",
-	     (unsigned int)serial, (unsigned int)ATEN2011_port,
-	     (unsigned int)ATEN2011_serial, (unsigned int)port);
-
-	return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int chars = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
-			   struct file *filp)
-{
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	int no_urbs;
-	__u16 Data;
-
-	dbg("%s", "ATEN2011_close:entering...");
-	serial = port->serial;
-
-	/* take the Adpater and port's private data */
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	if (serial->dev) {
-		/* flush and block(wait) until tx is empty */
-		ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
-	}
-	/* kill the ports URB's */
-	for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
-		usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	/* Freeing Write URBs */
-	for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
-		kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	}
-	/* While closing port, shutdown all bulk read, write  *
-	 * and interrupt read if they exists                  */
-	if (serial->dev) {
-		if (ATEN2011_port->write_urb) {
-			dbg("%s", "Shutdown bulk write");
-			usb_kill_urb(ATEN2011_port->write_urb);
-		}
-		if (ATEN2011_port->read_urb) {
-			dbg("%s", "Shutdown bulk read");
-			usb_kill_urb(ATEN2011_port->read_urb);
-		}
-		if ((&ATEN2011_port->control_urb)) {
-			dbg("%s", "Shutdown control read");
-			/* usb_kill_urb (ATEN2011_port->control_urb); */
-
-		}
-	}
-	/* if(ATEN2011_port->ctrl_buf != NULL) */
-		/* kfree(ATEN2011_port->ctrl_buf); */
-	/* decrement the no.of open ports counter of an individual USB-serial adapter. */
-	ATEN2011_serial->NoOfOpenPorts--;
-	dbg("NoOfOpenPorts in close%d:in port%d",
-		ATEN2011_serial->NoOfOpenPorts, port->number);
-	if (ATEN2011_serial->NoOfOpenPorts == 0) {
-		/* stop the stus polling here */
-		ATEN2011_serial->status_polling_started = 0;
-		if (ATEN2011_serial->interrupt_read_urb) {
-			dbg("%s", "Shutdown interrupt_read_urb");
-			/* ATEN2011_serial->interrupt_in_buffer=NULL; */
-			/* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
-		}
-	}
-	if (ATEN2011_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(ATEN2011_port->write_urb->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb);
-	}
-
-	/* clear the MCR & IER */
-	Data = 0x00;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	ATEN2011_port->open = 0;
-	dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
-						struct ATENINTL_port
-						*ATEN2011_port)
-{
-	int timeout = 1 * HZ;
-	int wait = 10;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0) {
-			ATEN2011_port->chaseResponsePending = 0;
-			return;
-		}
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 10;
-		}
-	}
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned char data;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("%s", "Entering ...........");
-	dbg("ATEN2011_break: Start");
-
-	serial = port->serial;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	/* flush and chase */
-	ATEN2011_port->chaseResponsePending = 1;
-
-	if (serial->dev) {
-		/* flush and block until tx is empty */
-		ATEN2011_block_until_chase_response(tty, ATEN2011_port);
-	}
-
-	if (break_state == -1)
-		data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
-	else
-		data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
-	ATEN2011_port->shadowLCR = data;
-	dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
-		ATEN2011_port->shadowLCR);
-	set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int room = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *data, int count)
-{
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-	int minor;
-
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct urb *urb;
-	const unsigned char *current_position = data;
-	unsigned char *data1;
-	dbg("%s", "entering ...........");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_port is NULL");
-		return -1;
-	}
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL) {
-		dbg("%s", "ATEN2011_serial is NULL");
-		return -1;
-	}
-
-	/* try to find a free urb in the list */
-	urb = NULL;
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
-			urb = ATEN2011_port->write_urb_pool[i];
-			dbg("URB:%d", i);
-			break;
-		}
-	}
-
-	if (urb == NULL) {
-		dbg("%s - no more free urbs", __func__);
-		goto exit;
-	}
-
-	if (urb->transfer_buffer == NULL) {
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
-		if (urb->transfer_buffer == NULL) {
-			err("%s no more kernel memory...", __func__);
-			goto exit;
-		}
-	}
-	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-	memcpy(urb->transfer_buffer, current_position, transfer_size);
-	/* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
-	/* fill urb with data and submit  */
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  (port->
-						   bulk_out_endpointAddress) +
-						  2), urb->transfer_buffer,
-				  transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-	} else
-
-		usb_fill_bulk_urb(urb,
-				  ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  port->
-						  bulk_out_endpointAddress),
-				  urb->transfer_buffer, transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-
-	data1 = urb->transfer_buffer;
-	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
-	/* for(i=0;i < urb->actual_length;i++) */
-		/* dbg("Data is %c ",data1[i]); */
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-
-	if (status) {
-		err("%s - usb_submit_urb(write bulk) failed with status = %d",
-		    __func__, status);
-		bytes_sent = status;
-		goto exit;
-	}
-	bytes_sent = transfer_size;
-	ATEN2011_port->icount.tx += transfer_size;
-	dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
-	return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	int status;
-
-	dbg("- port %d", port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s", "port not opened");
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the stop character */
-	if (I_IXOFF(tty)) {
-		unsigned char stop_char = STOP_CHAR(tty);
-		status = ATEN2011_write(tty, port, &stop_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR &= ~MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int status;
-	struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the start character */
-	if (I_IXOFF(tty)) {
-		unsigned char start_char = START_CHAR(tty);
-		status = ATEN2011_write(tty, port, &start_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR |= MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int result;
-	__u16 msr;
-	__u16 mcr;
-	/* unsigned int mcr; */
-	int status = 0;
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
-	status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
-	/* mcr = ATEN2011_port->shadowMCR; */
-	/* COMMENT2: the Fallowing three line are commented for updating only MSR values */
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
-	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
-	    | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
-	    | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
-	    | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
-	    | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
-	    | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
-	dbg("%s - 0x%04X", __func__, result);
-
-	return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
-			     unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int mcr;
-	unsigned int status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	mcr = ATEN2011_port->shadowMCR;
-	if (clear & TIOCM_RTS)
-		mcr &= ~MCR_RTS;
-	if (clear & TIOCM_DTR)
-		mcr &= ~MCR_DTR;
-	if (clear & TIOCM_LOOP)
-		mcr &= ~MCR_LOOPBACK;
-
-	if (set & TIOCM_RTS)
-		mcr |= MCR_RTS;
-	if (set & TIOCM_DTR)
-		mcr |= MCR_DTR;
-	if (set & TIOCM_LOOP)
-		mcr |= MCR_LOOPBACK;
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios)
-{
-	int status;
-	unsigned int cflag;
-	struct usb_serial *serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("ATEN2011_set_termios: START");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "setting termios - ");
-
-	cflag = tty->termios->c_cflag;
-
-	dbg("%s - cflag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
-	if (old_termios) {
-		dbg("%s - old clfag %08x old iflag %08x", __func__,
-		    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	}
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* change the port settings to the new ones specified */
-
-	ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
-			struct ATENINTL_port *ATEN2011_port,
-			unsigned int __user *value)
-{
-	int count;
-	unsigned int result = 0;
-
-	count = ATEN2011_chars_in_buffer(tty);
-	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
-	}
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
-				  struct ATENINTL_port *ATEN2011_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-
-	return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
-			  unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	mcr = ATEN2011_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	Data = ATEN2011_port->shadowMCR;
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = ATEN2011_port->shadowMCR;
-	int status;
-
-	status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
-			   struct serial_struct __user *retinfo)
-{
-	struct serial_struct tmp;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	if (!retinfo)
-		return -EFAULT;
-
-	memset(&tmp, 0, sizeof(tmp));
-
-	tmp.type = PORT_16550A;
-	tmp.line = ATEN2011_port->port->serial->minor;
-	if (tmp.line == SERIAL_TTY_NO_MINOR)
-		tmp.line = 0;
-	tmp.port = ATEN2011_port->port->number;
-	tmp.irq = 0;
-	tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-	tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
-	tmp.baud_base = 9600;
-	tmp.close_delay = 5 * HZ;
-	tmp.closing_wait = 30 * HZ;
-
-	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return -EFAULT;
-	return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
-			  unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount cnow;
-	struct async_icount cprev;
-	struct serial_icounter_struct icount;
-	int ATENret = 0;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
-	switch (cmd) {
-		/* return number of bytes available */
-
-	case TIOCINQ:
-		dbg("%s (%d) TIOCINQ", __func__, port->number);
-		return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
-		break;
-
-	case TIOCOUTQ:
-		dbg("%s (%d) TIOCOUTQ", __func__, port->number);
-		return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
-		break;
-
-	case TIOCSERGETLSR:
-		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-		return get_lsr_info(tty, ATEN2011_port, user_arg);
-		return 0;
-
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
-		return ATENret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return get_modem_info(ATEN2011_port, user_arg);
-
-	case TIOCGSERIAL:
-		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
-		return get_serial_info(ATEN2011_port,
-				       (struct serial_struct __user *)arg);
-
-	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
-		break;
-
-	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
-		cprev = ATEN2011_port->icount;
-		while (1) {
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			cnow = ATEN2011_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO;	/* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
-
-	case TIOCGICOUNT:
-		cnow = ATEN2011_port->icount;
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx);
-		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
-
-	default:
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
-					   __u16 *clk_sel_val)
-{
-	dbg("%s - %d", __func__, baudRate);
-
-	if (baudRate <= 115200) {
-		*divisor = 115200 / baudRate;
-		*clk_sel_val = 0x0;
-	}
-	if ((baudRate > 115200) && (baudRate <= 230400)) {
-		*divisor = 230400 / baudRate;
-		*clk_sel_val = 0x10;
-	} else if ((baudRate > 230400) && (baudRate <= 403200)) {
-		*divisor = 403200 / baudRate;
-		*clk_sel_val = 0x20;
-	} else if ((baudRate > 403200) && (baudRate <= 460800)) {
-		*divisor = 460800 / baudRate;
-		*clk_sel_val = 0x30;
-	} else if ((baudRate > 460800) && (baudRate <= 806400)) {
-		*divisor = 806400 / baudRate;
-		*clk_sel_val = 0x40;
-	} else if ((baudRate > 806400) && (baudRate <= 921600)) {
-		*divisor = 921600 / baudRate;
-		*clk_sel_val = 0x50;
-	} else if ((baudRate > 921600) && (baudRate <= 1572864)) {
-		*divisor = 1572864 / baudRate;
-		*clk_sel_val = 0x60;
-	} else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
-		*divisor = 3145728 / baudRate;
-		*clk_sel_val = 0x70;
-	}
-	return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
-					     *ATEN2011_port, int baudRate)
-{
-	int divisor = 0;
-	int status;
-	__u16 Data;
-	unsigned char number;
-	__u16 clk_sel_val;
-	struct usb_serial_port *port;
-	int minor;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	dbg("%s", "Entering .......... ");
-
-	minor = ATEN2011_port->port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	number = ATEN2011_port->port->number - minor;
-
-	dbg("%s - port = %d, baud = %d", __func__,
-	    ATEN2011_port->port->number, baudRate);
-	/* reset clk_uart_sel in spregOffset */
-	if (baudRate > 115200) {
-#ifdef HW_flow_control
-		/*
-		 * NOTE: need to see the pther register to modify
-		 * setting h/w flow control bit to 1;
-		 */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0x2b;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	} else {
-#ifdef HW_flow_control
-		/* setting h/w flow control bit to 0; */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0xb;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	}
-
-	if (1)			/* baudRate <= 115200) */ {
-		clk_sel_val = 0x0;
-		Data = 0x0;
-		status =
-		    ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
-						    &clk_sel_val);
-		status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-		if (status < 0) {
-			dbg("reading spreg failed in set_serial_baud");
-			return -1;
-		}
-		Data = (Data & 0x8f) | clk_sel_val;
-		status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-		/* Calculate the Divisor */
-
-		if (status) {
-			err("%s - bad baud rate", __func__);
-			dbg("%s", "bad baud rate");
-			return status;
-		}
-		/* Enable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-		/* Write the divisor */
-		Data = (unsigned char)(divisor & 0xff);
-		dbg("set_serial_baud Value to write DLL is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-		Data = (unsigned char)((divisor & 0xff00) >> 8);
-		dbg("set_serial_baud Value to write DLM is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-		/* Disable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	}
-
-	return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios)
-{
-	int baud;
-	unsigned cflag;
-	unsigned iflag;
-	__u8 lData;
-	__u8 lParity;
-	__u8 lStop;
-	int status;
-	__u16 Data;
-	struct usb_serial_port *port;
-	struct usb_serial *serial;
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	serial = port->serial;
-
-	dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	if ((!tty) || (!tty->termios)) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	lData = LCR_BITS_8;
-	lStop = LCR_STOP_1;
-	lParity = LCR_PAR_NONE;
-
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
-
-	/* Change the number of bits */
-
-	/* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
-	/* if(cflag & CSIZE) */
-	{
-		switch (cflag & CSIZE) {
-		case CS5:
-			lData = LCR_BITS_5;
-			break;
-
-		case CS6:
-			lData = LCR_BITS_6;
-			break;
-
-		case CS7:
-			lData = LCR_BITS_7;
-			break;
-		default:
-		case CS8:
-			lData = LCR_BITS_8;
-			break;
-		}
-	}
-	/* Change the Parity bit */
-	if (cflag & PARENB) {
-		if (cflag & PARODD) {
-			lParity = LCR_PAR_ODD;
-			dbg("%s - parity = odd", __func__);
-		} else {
-			lParity = LCR_PAR_EVEN;
-			dbg("%s - parity = even", __func__);
-		}
-
-	} else {
-		dbg("%s - parity = none", __func__);
-	}
-
-	if (cflag & CMSPAR)
-		lParity = lParity | 0x20;
-
-	/* Change the Stop bit */
-	if (cflag & CSTOPB) {
-		lStop = LCR_STOP_2;
-		dbg("%s - stop bits = 2", __func__);
-	} else {
-		lStop = LCR_STOP_1;
-		dbg("%s - stop bits = 1", __func__);
-	}
-
-	/* Update the LCR with the correct value */
-	ATEN2011_port->shadowLCR &=
-	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
-	ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
-	     ATEN2011_port->shadowLCR);
-	/* Disable Interrupts */
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	Data = 0x00;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	Data = 0xcf;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	/* Send the updated LCR value to the ATEN2011 */
-	Data = ATEN2011_port->shadowLCR;
-
-	set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x00b;
-	ATEN2011_port->shadowMCR = Data;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00b;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* set up the MCR register and send it to the ATEN2011 */
-
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;
-	if (cflag & CBAUD)
-		ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
-	if (cflag & CRTSCTS)
-		ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
-	else
-		ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
-	Data = ATEN2011_port->shadowMCR;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(tty);
-
-	if (!baud) {
-		/* pick a default, any default... */
-		dbg("%s", "Picked default baud...");
-		baud = 9600;
-	}
-
-	dbg("%s - baud rate = %d", __func__, baud);
-	status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
-	/* Enable Interrupts */
-	Data = 0x0c;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
-	     ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
-	__u16 Data = 0x00;
-	int ret = 0;
-	int ATEN2011_2or4ports;
-	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			      ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
-			      &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
-	if ((Data & 0x01) == 0) {
-		ATEN2011_2or4ports = 2;
-		serial->type->num_ports = 2;
-		serial->num_ports = 2;
-	}
-	/* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
-	else {
-		ATEN2011_2or4ports = 4;
-		serial->type->num_ports = 4;
-		serial->num_ports = 4;
-
-	}
-
-	return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_device *dev;
-	int i, status;
-	int minor;
-
-	__u16 Data;
-	dbg("%s", " ATEN2011_startup :entering..........");
-
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return -1;
-	}
-
-	dev = serial->dev;
-
-	dbg("%s", "Entering...");
-
-	/* create our private serial structure */
-	ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
-	if (ATEN2011_serial == NULL) {
-		err("%s - Out of memory", __func__);
-		return -ENOMEM;
-	}
-
-	/* resetting the private structure field values to zero */
-	memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
-	ATEN2011_serial->serial = serial;
-	/* initilize status polling flag to 0 */
-	ATEN2011_serial->status_polling_started = 0;
-
-	usb_set_serial_data(serial, ATEN2011_serial);
-	ATEN2011_serial->ATEN2011_spectrum_2or4ports =
-	    ATEN2011_calc_num_ports(serial);
-	/* we set up the pointers to the endpoints in the ATEN2011_open *
-	 * function, as the structures aren't created yet.             */
-
-	/* set up port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port =
-		    kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
-		if (ATEN2011_port == NULL) {
-			err("%s - Out of memory", __func__);
-			usb_set_serial_data(serial, NULL);
-			kfree(ATEN2011_serial);
-			return -ENOMEM;
-		}
-		memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
-		/*
-		 * Initialize all port interrupt end point to port 0
-		 * int endpoint. Our device has only one interrupt end point
-		 * comman to all port
-		 */
-		/* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
-		ATEN2011_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		minor = serial->port[i]->serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		ATEN2011_port->port_num =
-		    ((serial->port[i]->number - minor) + 1);
-
-		if (ATEN2011_port->port_num == 1) {
-			ATEN2011_port->SpRegOffset = 0x0;
-			ATEN2011_port->ControlRegOffset = 0x1;
-			ATEN2011_port->DcrRegOffset = 0x4;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0x8;
-			ATEN2011_port->ControlRegOffset = 0x9;
-			ATEN2011_port->DcrRegOffset = 0x16;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       2)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 3)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 4)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xc;
-			ATEN2011_port->ControlRegOffset = 0xd;
-			ATEN2011_port->DcrRegOffset = 0x1c;
-		}
-
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		/* enable rx_disable bit in control register */
-
-		status = get_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, &Data);
-		if (status < 0) {
-			dbg("Reading ControlReg failed status-0x%x",
-				status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Reading success val is %x, status%d",
-			     Data, status);
-		Data |= 0x08;	/* setting driver done bit */
-		Data |= 0x04;	/* sp1_bit to have cts change reflect in modem status reg */
-
-		/* Data |= 0x20; */	/* rx_disable bit */
-		status = set_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, Data);
-		if (status < 0) {
-			dbg
-			    ("Writing ControlReg failed(rx_disable) status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Writing success(rx_disable) status%d",
-			     status);
-
-		/*
-		 * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
-		 * and 0x24 in DCR3
-		 */
-		Data = 0x01;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 0),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR0 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR0 Writing success status%d", status);
-
-		Data = 0x05;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 1),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR1 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR1 Writing success status%d", status);
-
-		Data = 0x24;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 2),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR2 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR2 Writing success status%d", status);
-
-		/* write values in clkstart0x0 and clkmulti 0x20 */
-		Data = 0x0;
-		status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("CLK_START_VALUE_REGISTER Writing success status%d",
-			     status);
-
-		Data = 0x20;
-		status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_MULTI_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg("CLK_MULTI_REGISTER Writing success status%d",
-				status);
-
-		/* Zero Length flag register */
-		if ((ATEN2011_port->port_num != 1)
-		    && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num)));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 2, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 2, status);
-		} else {
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num) -
-					 0x1));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 1, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 1, status);
-
-		}
-		ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
-	}
-
-	/* Zero Length flag enable */
-	Data = 0x0f;
-	status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
-	if (status < 0) {
-		dbg("Writing ZLP_REG5 failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("ZLP_REG5 Writing success status%d", status);
-
-	/* setting configuration feature to one */
-	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
-	return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
-	int i;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* check for the ports to be closed,close the ports and disconnect */
-
-	/* free private structure allocated for serial port  *
-	 * stop reads and writes on all ports                */
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		kfree(ATEN2011_port->ctrl_buf);
-		usb_kill_urb(ATEN2011_port->control_urb);
-		kfree(ATEN2011_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-
-	/* free private structure allocated for serial device */
-
-	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"aten2011",
-		},
-	.description =		DRIVER_DESC,
-	.id_table =		id_table,
-	.open =			ATEN2011_open,
-	.close =		ATEN2011_close,
-	.write =		ATEN2011_write,
-	.write_room =		ATEN2011_write_room,
-	.chars_in_buffer =	ATEN2011_chars_in_buffer,
-	.throttle =		ATEN2011_throttle,
-	.unthrottle =		ATEN2011_unthrottle,
-	.calc_num_ports =	ATEN2011_calc_num_ports,
-
-	.ioctl =		ATEN2011_ioctl,
-	.set_termios =		ATEN2011_set_termios,
-	.break_ctl =		ATEN2011_break,
-	.tiocmget =		ATEN2011_tiocmget,
-	.tiocmset =		ATEN2011_tiocmset,
-	.attach =		ATEN2011_startup,
-	.release =		ATEN2011_release,
-	.read_bulk_callback =	ATEN2011_bulk_in_callback,
-	.read_int_callback =	ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
-	.name =		"aten2011",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
-static int __init aten_init(void)
-{
-	int retval;
-
-	/* Register with the usb serial */
-	retval = usb_serial_register(&aten_serial_driver);
-	if (retval)
-		return retval;
-
-	printk(KERN_INFO KBUILD_MODNAME ":"
-	       DRIVER_DESC " " DRIVER_VERSION "\n");
-
-	/* Register with the usb */
-	retval = usb_register(&aten_driver);
-	if (retval)
-		usb_serial_deregister(&aten_serial_driver);
-
-	return retval;
-}
-
-static void __exit aten_exit(void)
-{
-	usb_deregister(&aten_driver);
-	usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");