Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
  USB: otg: fix module reinsert issue
  USB: handle zero-length usbfs submissions correctly
  USB: EHCI: report actual_length for iso transfers
  USB: option: remove unnecessary and erroneous code
  USB: cypress_m8: remove invalid Clear-Halt
  USB: musb_host: undo incorrect change in musb_advance_schedule()
  USB: fix LANGID=0 regression
  USB: serial: sierra driver id_table additions
  USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
  USB: fix race leading to a write after kfree in usbfs
  USB: Sierra: fix oops upon device close
  USB: option.c: add A-Link 3GU device id
  USB: Serial: Add support for Arkham Technology adapters
  USB: Fix option_ms regression in 2.6.31-rc2
  USB: gadget audio: select SND_PCM
  USB: ftdi: support NDI devices
  Revert USB: usbfs: deprecate and hide option for !embedded
  USB: usb.h: fix kernel-doc notation
  USB: RNDIS gadget, fix issues talking from PXA
  USB: serial: FTDI with product code FB80 and vendor id 0403
  ...

2 files changed, 51 insertions, 8 deletions

diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7daa409..e16ff605c45 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
 #include <mach/hardware.h>
 #include <mach/memory.h>
 #include <mach/gpio.h>
+#include <mach/cputype.h>
 
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV		87
+#define GPIO_nVBUS_DRV		144
 #endif
 
 #include "davinci.h"
@@ -329,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (is_host_enabled(musb) && drvvbus) {
-			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
 			musb->xceiv->default_a = 1;
 			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
 		}
 
-		/* NOTE:  this must complete poweron within 100 msec */
+		/* NOTE:  this must complete poweron within 100 msec
+		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+		 */
 		davinci_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@ int __init musb_platform_init(struct musb *musb)
 		__raw_writel(phy_ctrl, USB_PHY_CTRL);
 	}
 
+	/* On dm355, the default-A state machine needs DRVVBUS control.
+	 * If we won't be a host, there's no need to turn it on.
+	 */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		if (is_host_enabled(musb)) {
+			deepsleep &= ~DRVVBUS_OVERRIDE;
+		} else {
+			deepsleep &= ~DRVVBUS_FORCE;
+			deepsleep |= DRVVBUS_OVERRIDE;
+		}
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	/* reset the controller */
 	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -437,6 +454,15 @@ int musb_platform_exit(struct musb *musb)
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
 
+	/* force VBUS off */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		deepsleep &= ~DRVVBUS_FORCE;
+		deepsleep |= DRVVBUS_OVERRIDE;
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	davinci_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a350a41..cf94511485f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 		musb_save_toggle(qh, is_in, urb);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		if (urb->error_count)
+		if (status == 0 && urb->error_count)
 			status = -EXDEV;
 		break;
 	}
@@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd)
 static int musb_bus_suspend(struct usb_hcd *hcd)
 {
 	struct musb	*musb = hcd_to_musb(hcd);
+	u8		devctl;
 
-	if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+	if (!is_host_active(musb))
 		return 0;
 
-	if (is_host_active(musb) && musb->is_active) {
-		WARNING("trying to suspend as %s is_active=%i\n",
-			otg_state_string(musb), musb->is_active);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_SUSPEND:
+		return 0;
+	case OTG_STATE_A_WAIT_VRISE:
+		/* ID could be grounded even if there's no device
+		 * on the other end of the cable.  NOTE that the
+		 * A_WAIT_VRISE timers are messy with MUSB...
+		 */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	default:
+		break;
+	}
+
+	if (musb->is_active) {
+		WARNING("trying to suspend as %s while active\n",
+				otg_state_string(musb));
 		return -EBUSY;
 	} else
 		return 0;