Input: move USB miscellaneous devices under drivers/input/misc

This will allow concentrating all input devices in one place
in {menu|x|q}config.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

11 files changed, 0 insertions, 3968 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 9980a4ddfed..b847bbc8b0e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -85,8 +85,6 @@ source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
-source "drivers/usb/input/Kconfig"
-
 source "drivers/usb/image/Kconfig"
 
 source "drivers/usb/net/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 7059a64637a..0ef090b1b37 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -23,9 +23,6 @@ obj-$(CONFIG_USB_PRINTER)	+= class/
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
 
-obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_POWERMATE)	+= input/
-
 obj-$(CONFIG_USB_CATC)		+= net/
 obj-$(CONFIG_USB_KAWETH)	+= net/
 obj-$(CONFIG_USB_PEGASUS)	+= net/
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
deleted file mode 100644
index 4959dcf3cb4..00000000000
--- a/drivers/usb/input/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# USB Input driver configuration
-#
-comment "USB Input Devices"
-	depends on USB
-
-config USB_POWERMATE
-	tristate "Griffin PowerMate and Contour Jog support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
-	  These are aluminum dials which can measure clockwise and anticlockwise
-	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
-	  which can be instructed to pulse or to switch to a particular intensity.
-
-	  You can download userspace tools from
-	  <http://sowerbutts.com/powermate/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powermate.
-
-config USB_YEALINK
-	tristate "Yealink usb-p1k voip phone"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to enable keyboard and LCD functions of the
-	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
-	  usb sound driver, so you might want to enable that as well.
-
-	  For information about how to use these additional functions, see
-	  <file:Documentation/input/yealink.txt>.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called yealink.
-
-config USB_ATI_REMOTE
-	tristate "ATI / X10 USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
-	  These are RF remotes with USB receivers. 
-	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
-	  The X10 "Lola" remote is available at:
-	     <http://www.x10.com/products/lola_sg1.htm>
-	  This driver provides mouse pointer, left and right mouse buttons, 
-	  and maps all the other remote buttons to keypress events.
-	  
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote.
-
-config USB_ATI_REMOTE2
-	tristate "ATI / Philips USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or Philips USB RF remote control.
-	  These are RF remotes with USB receivers.
-	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
-	  and is also available as a separate product.
-	  This driver provides mouse pointer, left and right mouse buttons,
-	  and maps all the other remote buttons to keypress events.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote2.
-
-config USB_KEYSPAN_REMOTE
-	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to use a Keyspan DMR USB remote control.
-	  Currently only the UIA-11 type of receiver has been tested.  The tag
-	  on the receiver that connects to the USB port should have a P/N that
-	  will tell you what type of DMR you have.  The UIA-10 type is not
-	  supported at this time.  This driver maps all buttons to keypress
-	  events.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called keyspan_remote.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
deleted file mode 100644
index 91df130909e..00000000000
--- a/drivers/usb/input/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the USB input drivers
-#
-
-obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
-obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
-obj-$(CONFIG_USB_YEALINK)	+= yealink.o
-
-ifeq ($(CONFIG_USB_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
deleted file mode 100644
index 471aab20644..00000000000
--- a/drivers/usb/input/ati_remote.c
+++ /dev/null
@@ -1,862 +0,0 @@
-/*
- *  USB ATI Remote support
- *
- *  Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
- *  Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
- *
- *  This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
- *  porting to the 2.6 kernel interfaces, along with other modification
- *  to better match the style of the existing usb/input drivers.  However, the
- *  protocol and hardware handling is essentially unchanged from 2.1.1.
- *
- *  The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
- *  Vojtech Pavlik.
- *
- *  Changes:
- *
- *  Feb 2004: Torrey Hoffman <thoffman@arnor.net>
- *            Version 2.2.0
- *  Jun 2004: Torrey Hoffman <thoffman@arnor.net>
- *            Version 2.2.1
- *            Added key repeat support contributed by:
- *                Vincent Vanackere <vanackere@lif.univ-mrs.fr>
- *            Added support for the "Lola" remote contributed by:
- *                Seth Cohn <sethcohn@yahoo.com>
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * Hardware & software notes
- *
- * These remote controls are distributed by ATI as part of their
- * "All-In-Wonder" video card packages.  The receiver self-identifies as a
- * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
- *
- * The "Lola" remote is available from X10.  See:
- *    http://www.x10.com/products/lola_sg1.htm
- * The Lola is similar to the ATI remote but has no mouse support, and slightly
- * different keys.
- *
- * It is possible to use multiple receivers and remotes on multiple computers
- * simultaneously by configuring them to use specific channels.
- *
- * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
- * Actually, it may even support more, at least in some revisions of the
- * hardware.
- *
- * Each remote can be configured to transmit on one channel as follows:
- *   - Press and hold the "hand icon" button.
- *   - When the red LED starts to blink, let go of the "hand icon" button.
- *   - When it stops blinking, input the channel code as two digits, from 01
- *     to 16, and press the hand icon again.
- *
- * The timing can be a little tricky.  Try loading the module with debug=1
- * to have the kernel print out messages about the remote control number
- * and mask.  Note: debugging prints remote numbers as zero-based hexadecimal.
- *
- * The driver has a "channel_mask" parameter. This bitmask specifies which
- * channels will be ignored by the module.  To mask out channels, just add
- * all the 2^channel_number values together.
- *
- * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
- * ignore signals coming from remote controls transmitting on channel 4, but
- * accept all other channels.
- *
- * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
- * ignored.
- *
- * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
- * parameter are unused.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/input.h>
-#include <linux/wait.h>
-#include <linux/jiffies.h>
-
-/*
- * Module and Version Information, Module Parameters
- */
-
-#define ATI_REMOTE_VENDOR_ID	0x0bc7
-#define ATI_REMOTE_PRODUCT_ID	0x004
-#define LOLA_REMOTE_PRODUCT_ID	0x002
-#define MEDION_REMOTE_PRODUCT_ID 0x006
-
-#define DRIVER_VERSION	        "2.2.1"
-#define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
-#define DRIVER_DESC             "ATI/X10 RF USB Remote Control"
-
-#define NAME_BUFSIZE      80    /* size of product name, path buffers */
-#define DATA_BUFSIZE      63    /* size of URB data buffers */
-
-/*
- * Duplicate event filtering time.
- * Sequential, identical KIND_FILTERED inputs with less than
- * FILTER_TIME milliseconds between them are considered as repeat
- * events. The hardware generates 5 events for the first keypress
- * and we have to take this into account for an accurate repeat
- * behaviour.
- */
-#define FILTER_TIME	60 /* msec */
-#define REPEAT_DELAY	500 /* msec */
-
-static unsigned long channel_mask;
-module_param(channel_mask, ulong, 0644);
-MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
-
-static int repeat_filter = FILTER_TIME;
-module_param(repeat_filter, int, 0644);
-MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
-
-static int repeat_delay = REPEAT_DELAY;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
-
-#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
-#undef err
-#define err(format, arg...) printk(KERN_ERR format , ## arg)
-
-static struct usb_device_id ati_remote_table[] = {
-	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
-	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
-	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
-	{}	/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ati_remote_table);
-
-/* Get hi and low bytes of a 16-bits int */
-#define HI(a)	((unsigned char)((a) >> 8))
-#define LO(a)	((unsigned char)((a) & 0xff))
-
-#define SEND_FLAG_IN_PROGRESS	1
-#define SEND_FLAG_COMPLETE	2
-
-/* Device initialization strings */
-static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
-static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
-
-struct ati_remote {
-	struct input_dev *idev;
-	struct usb_device *udev;
-	struct usb_interface *interface;
-
-	struct urb *irq_urb;
-	struct urb *out_urb;
-	struct usb_endpoint_descriptor *endpoint_in;
-	struct usb_endpoint_descriptor *endpoint_out;
-	unsigned char *inbuf;
-	unsigned char *outbuf;
-	dma_addr_t inbuf_dma;
-	dma_addr_t outbuf_dma;
-
-	unsigned char old_data[2];  /* Detect duplicate events */
-	unsigned long old_jiffies;
-	unsigned long acc_jiffies;  /* handle acceleration */
-	unsigned long first_jiffies;
-
-	unsigned int repeat_count;
-
-	char name[NAME_BUFSIZE];
-	char phys[NAME_BUFSIZE];
-
-	wait_queue_head_t wait;
-	int send_flags;
-};
-
-/* "Kinds" of messages sent from the hardware to the driver. */
-#define KIND_END        0
-#define KIND_LITERAL    1   /* Simply pass to input system */
-#define KIND_FILTERED   2   /* Add artificial key-up events, drop keyrepeats */
-#define KIND_LU         3   /* Directional keypad diagonals - left up, */
-#define KIND_RU         4   /*   right up,  */
-#define KIND_LD         5   /*   left down, */
-#define KIND_RD         6   /*   right down */
-#define KIND_ACCEL      7   /* Directional keypad - left, right, up, down.*/
-
-/* Translation table from hardware messages to input events. */
-static const struct {
-	short kind;
-	unsigned char data1, data2;
-	int type;
-	unsigned int code;
-	int value;
-}  ati_remote_tbl[] = {
-	/* Directional control pad axes */
-	{KIND_ACCEL,   0x35, 0x70, EV_REL, REL_X, -1},	 /* left */
-	{KIND_ACCEL,   0x36, 0x71, EV_REL, REL_X, 1},    /* right */
-	{KIND_ACCEL,   0x37, 0x72, EV_REL, REL_Y, -1},	 /* up */
-	{KIND_ACCEL,   0x38, 0x73, EV_REL, REL_Y, 1},    /* down */
-	/* Directional control pad diagonals */
-	{KIND_LU,      0x39, 0x74, EV_REL, 0, 0},        /* left up */
-	{KIND_RU,      0x3a, 0x75, EV_REL, 0, 0},        /* right up */
-	{KIND_LD,      0x3c, 0x77, EV_REL, 0, 0},        /* left down */
-	{KIND_RD,      0x3b, 0x76, EV_REL, 0, 0},        /* right down */
-
-	/* "Mouse button" buttons */
-	{KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
-	{KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
-	{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
-	{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
-
-	/* Artificial "doubleclick" events are generated by the hardware.
-	 * They are mapped to the "side" and "extra" mouse buttons here. */
-	{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
-	{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
-
-	/* keyboard. */
-	{KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
-	{KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
-	{KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
-	{KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
-	{KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
-	{KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
-	{KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
-	{KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
-	{KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
-	{KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
-	{KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
-	{KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
-	{KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
-	{KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
-	{KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
-	{KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
-
-	/* "special" keys */
-	{KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1},    /* "check" */
-	{KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1},       /* "menu" */
-	{KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1},      /* Power */
-	{KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1},         /* TV */
-	{KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1},        /* DVD */
-	{KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1},        /* WEB */
-	{KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1},  /* "book" */
-	{KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1},       /* "hand" */
-	{KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1},     /* "timer" */
-	{KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1},      /* "max" */
-	{KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1},       /* left */
-	{KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1},      /* right */
-	{KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1},       /* down */
-	{KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1},         /* up */
-	{KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1},         /* "OK" */
-	{KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
-	{KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1},   /* VOL - */
-	{KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1},       /* MUTE  */
-	{KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1},  /* CH + */
-	{KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
-	{KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1},     /* ( o) red */
-	{KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1},       /* ( >) */
-	{KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1},     /* (<<) */
-	{KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1},    /* (>>) */
-	{KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1},       /* ([]) */
-	{KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1},      /* ('') */
-	{KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1},   /* (<-) */
-	{KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1},       /* (>+) */
-	{KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1},       /* PLAYING */
-	{KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1},       /* TOP */
-	{KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1},        /* END */
-	{KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1},     /* SELECT */
-
-	{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
-};
-
-/* Local function prototypes */
-static void ati_remote_dump		(unsigned char *data, unsigned int actual_length);
-static int ati_remote_open		(struct input_dev *inputdev);
-static void ati_remote_close		(struct input_dev *inputdev);
-static int ati_remote_sendpacket	(struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
-static void ati_remote_irq_out		(struct urb *urb);
-static void ati_remote_irq_in		(struct urb *urb);
-static void ati_remote_input_report	(struct urb *urb);
-static int ati_remote_initialize	(struct ati_remote *ati_remote);
-static int ati_remote_probe		(struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote_disconnect	(struct usb_interface *interface);
-
-/* usb specific object to register with the usb subsystem */
-static struct usb_driver ati_remote_driver = {
-	.name         = "ati_remote",
-	.probe        = ati_remote_probe,
-	.disconnect   = ati_remote_disconnect,
-	.id_table     = ati_remote_table,
-};
-
-/*
- *	ati_remote_dump_input
- */
-static void ati_remote_dump(unsigned char *data, unsigned int len)
-{
-	if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
-		warn("Weird byte 0x%02x", data[0]);
-	else if (len == 4)
-		warn("Weird key %02x %02x %02x %02x",
-		     data[0], data[1], data[2], data[3]);
-	else
-		warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
-		     len, data[0], data[1], data[2], data[3], data[4], data[5]);
-}
-
-/*
- *	ati_remote_open
- */
-static int ati_remote_open(struct input_dev *inputdev)
-{
-	struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
-	/* On first open, submit the read urb which was set up previously. */
-	ati_remote->irq_urb->dev = ati_remote->udev;
-	if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
-		dev_err(&ati_remote->interface->dev,
-			"%s: usb_submit_urb failed!\n", __FUNCTION__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/*
- *	ati_remote_close
- */
-static void ati_remote_close(struct input_dev *inputdev)
-{
-	struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
-	usb_kill_urb(ati_remote->irq_urb);
-}
-
-/*
- *		ati_remote_irq_out
- */
-static void ati_remote_irq_out(struct urb *urb)
-{
-	struct ati_remote *ati_remote = urb->context;
-
-	if (urb->status) {
-		dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
-			__FUNCTION__, urb->status);
-		return;
-	}
-
-	ati_remote->send_flags |= SEND_FLAG_COMPLETE;
-	wmb();
-	wake_up(&ati_remote->wait);
-}
-
-/*
- *	ati_remote_sendpacket
- *
- *	Used to send device initialization strings
- */
-static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
-{
-	int retval = 0;
-
-	/* Set up out_urb */
-	memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
-	((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
-
-	ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
-	ati_remote->out_urb->dev = ati_remote->udev;
-	ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
-
-	retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
-	if (retval) {
-		dev_dbg(&ati_remote->interface->dev,
-			 "sendpacket: usb_submit_urb failed: %d\n", retval);
-		return retval;
-	}
-
-	wait_event_timeout(ati_remote->wait,
-		((ati_remote->out_urb->status != -EINPROGRESS) ||
-			(ati_remote->send_flags & SEND_FLAG_COMPLETE)),
-		HZ);
-	usb_kill_urb(ati_remote->out_urb);
-
-	return retval;
-}
-
-/*
- *	ati_remote_event_lookup
- */
-static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
-{
-	int i;
-
-	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
-		/*
-		 * Decide if the table entry matches the remote input.
-		 */
-		if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
-		    ((((ati_remote_tbl[i].data1 >> 4) -
-		       (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
-		    (ati_remote_tbl[i].data2 == d2))
-			return i;
-
-	}
-	return -1;
-}
-
-/*
- *	ati_remote_compute_accel
- *
- * Implements acceleration curve for directional control pad
- * If elapsed time since last event is > 1/4 second, user "stopped",
- * so reset acceleration. Otherwise, user is probably holding the control
- * pad down, so we increase acceleration, ramping up over two seconds to
- * a maximum speed.
- */
-static int ati_remote_compute_accel(struct ati_remote *ati_remote)
-{
-	static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
-	unsigned long now = jiffies;
-	int acc;
-
-	if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
-		acc = 1;
-		ati_remote->acc_jiffies = now;
-	}
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
-		acc = accel[0];
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
-		acc = accel[1];
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
-		acc = accel[2];
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
-		acc = accel[3];
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
-		acc = accel[4];
-	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
-		acc = accel[5];
-	else
-		acc = accel[6];
-
-	return acc;
-}
-
-/*
- *	ati_remote_report_input
- */
-static void ati_remote_input_report(struct urb *urb)
-{
-	struct ati_remote *ati_remote = urb->context;
-	unsigned char *data= ati_remote->inbuf;
-	struct input_dev *dev = ati_remote->idev;
-	int index, acc;
-	int remote_num;
-
-	/* Deal with strange looking inputs */
-	if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
-		((data[3] & 0x0f) != 0x00) ) {
-		ati_remote_dump(data, urb->actual_length);
-		return;
-	}
-
-	/* Mask unwanted remote channels.  */
-	/* note: remote_num is 0-based, channel 1 on remote == 0 here */
-	remote_num = (data[3] >> 4) & 0x0f;
-        if (channel_mask & (1 << (remote_num + 1))) {
-		dbginfo(&ati_remote->interface->dev,
-			"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
-			remote_num, data[1], data[2], channel_mask);
-		return;
-	}
-
-	/* Look up event code index in translation table */
-	index = ati_remote_event_lookup(remote_num, data[1], data[2]);
-	if (index < 0) {
-		dev_warn(&ati_remote->interface->dev,
-			 "Unknown input from channel 0x%02x: data %02x,%02x\n",
-			 remote_num, data[1], data[2]);
-		return;
-	}
-	dbginfo(&ati_remote->interface->dev,
-		"channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
-		remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
-
-	if (ati_remote_tbl[index].kind == KIND_LITERAL) {
-		input_event(dev, ati_remote_tbl[index].type,
-			ati_remote_tbl[index].code,
-			ati_remote_tbl[index].value);
-		input_sync(dev);
-
-		ati_remote->old_jiffies = jiffies;
-		return;
-	}
-
-	if (ati_remote_tbl[index].kind == KIND_FILTERED) {
-		unsigned long now = jiffies;
-
-		/* Filter duplicate events which happen "too close" together. */
-		if (ati_remote->old_data[0] == data[1] &&
-		    ati_remote->old_data[1] == data[2] &&
-		    time_before(now, ati_remote->old_jiffies +
-				     msecs_to_jiffies(repeat_filter))) {
-			ati_remote->repeat_count++;
-		} else {
-			ati_remote->repeat_count = 0;
-			ati_remote->first_jiffies = now;
-		}
-
-		ati_remote->old_data[0] = data[1];
-		ati_remote->old_data[1] = data[2];
-		ati_remote->old_jiffies = now;
-
-		/* Ensure we skip at least the 4 first duplicate events (generated
-		 * by a single keypress), and continue skipping until repeat_delay
-		 * msecs have passed
-		 */
-		if (ati_remote->repeat_count > 0 &&
-		    (ati_remote->repeat_count < 5 ||
-		     time_before(now, ati_remote->first_jiffies +
-				      msecs_to_jiffies(repeat_delay))))
-			return;
-
-
-		input_event(dev, ati_remote_tbl[index].type,
-			ati_remote_tbl[index].code, 1);
-		input_sync(dev);
-		input_event(dev, ati_remote_tbl[index].type,
-			ati_remote_tbl[index].code, 0);
-		input_sync(dev);
-
-	} else {
-
-		/*
-		 * Other event kinds are from the directional control pad, and have an
-		 * acceleration factor applied to them.  Without this acceleration, the
-		 * control pad is mostly unusable.
-		 */
-		acc = ati_remote_compute_accel(ati_remote);
-
-		switch (ati_remote_tbl[index].kind) {
-		case KIND_ACCEL:
-			input_event(dev, ati_remote_tbl[index].type,
-				ati_remote_tbl[index].code,
-				ati_remote_tbl[index].value * acc);
-			break;
-		case KIND_LU:
-			input_report_rel(dev, REL_X, -acc);
-			input_report_rel(dev, REL_Y, -acc);
-			break;
-		case KIND_RU:
-			input_report_rel(dev, REL_X, acc);
-			input_report_rel(dev, REL_Y, -acc);
-			break;
-		case KIND_LD:
-			input_report_rel(dev, REL_X, -acc);
-			input_report_rel(dev, REL_Y, acc);
-			break;
-		case KIND_RD:
-			input_report_rel(dev, REL_X, acc);
-			input_report_rel(dev, REL_Y, acc);
-			break;
-		default:
-			dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
-				ati_remote_tbl[index].kind);
-		}
-		input_sync(dev);
-
-		ati_remote->old_jiffies = jiffies;
-		ati_remote->old_data[0] = data[1];
-		ati_remote->old_data[1] = data[2];
-	}
-}
-
-/*
- *	ati_remote_irq_in
- */
-static void ati_remote_irq_in(struct urb *urb)
-{
-	struct ati_remote *ati_remote = urb->context;
-	int retval;
-
-	switch (urb->status) {
-	case 0:			/* success */
-		ati_remote_input_report(urb);
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
-			__FUNCTION__);
-		return;
-	default:		/* error */
-		dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
-			__FUNCTION__, urb->status);
-	}
-
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
-			__FUNCTION__, retval);
-}
-
-/*
- *	ati_remote_alloc_buffers
- */
-static int ati_remote_alloc_buffers(struct usb_device *udev,
-				    struct ati_remote *ati_remote)
-{
-	ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
-					     &ati_remote->inbuf_dma);
-	if (!ati_remote->inbuf)
-		return -1;
-
-	ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
-					      &ati_remote->outbuf_dma);
-	if (!ati_remote->outbuf)
-		return -1;
-
-	ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!ati_remote->irq_urb)
-		return -1;
-
-	ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!ati_remote->out_urb)
-		return -1;
-
-	return 0;
-}
-
-/*
- *	ati_remote_free_buffers
- */
-static void ati_remote_free_buffers(struct ati_remote *ati_remote)
-{
-	usb_free_urb(ati_remote->irq_urb);
-	usb_free_urb(ati_remote->out_urb);
-
-	usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
-		ati_remote->inbuf, ati_remote->inbuf_dma);
-
-	usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
-		ati_remote->outbuf, ati_remote->outbuf_dma);
-}
-
-static void ati_remote_input_init(struct ati_remote *ati_remote)
-{
-	struct input_dev *idev = ati_remote->idev;
-	int i;
-
-	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-	idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
-					  BIT(BTN_SIDE) | BIT(BTN_EXTRA) );
-	idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
-		if (ati_remote_tbl[i].type == EV_KEY)
-			set_bit(ati_remote_tbl[i].code, idev->keybit);
-
-	input_set_drvdata(idev, ati_remote);
-
-	idev->open = ati_remote_open;
-	idev->close = ati_remote_close;
-
-	idev->name = ati_remote->name;
-	idev->phys = ati_remote->phys;
-
-	usb_to_input_id(ati_remote->udev, &idev->id);
-	idev->dev.parent = &ati_remote->udev->dev;
-}
-
-static int ati_remote_initialize(struct ati_remote *ati_remote)
-{
-	struct usb_device *udev = ati_remote->udev;
-	int pipe, maxp;
-
-	init_waitqueue_head(&ati_remote->wait);
-
-	/* Set up irq_urb */
-	pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
-	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
-	usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
-			 maxp, ati_remote_irq_in, ati_remote,
-			 ati_remote->endpoint_in->bInterval);
-	ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
-	ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* Set up out_urb */
-	pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
-	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
-	usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
-			 maxp, ati_remote_irq_out, ati_remote,
-			 ati_remote->endpoint_out->bInterval);
-	ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
-	ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* send initialization strings */
-	if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
-	    (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
-		dev_err(&ati_remote->interface->dev,
-			 "Initializing ati_remote hardware failed.\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/*
- *	ati_remote_probe
- */
-static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *iface_host = interface->cur_altsetting;
-	struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
-	struct ati_remote *ati_remote;
-	struct input_dev *input_dev;
-	int err = -ENOMEM;
-
-	if (iface_host->desc.bNumEndpoints != 2) {
-		err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
-		return -ENODEV;
-	}
-
-	endpoint_in = &iface_host->endpoint[0].desc;
-	endpoint_out = &iface_host->endpoint[1].desc;
-
-	if (!usb_endpoint_is_int_in(endpoint_in)) {
-		err("%s: Unexpected endpoint_in\n", __FUNCTION__);
-		return -ENODEV;
-	}
-	if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
-		err("%s: endpoint_in message size==0? \n", __FUNCTION__);
-		return -ENODEV;
-	}
-
-	ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ati_remote || !input_dev)
-		goto fail1;
-
-	/* Allocate URB buffers, URBs */
-	if (ati_remote_alloc_buffers(udev, ati_remote))
-		goto fail2;
-
-	ati_remote->endpoint_in = endpoint_in;
-	ati_remote->endpoint_out = endpoint_out;
-	ati_remote->udev = udev;
-	ati_remote->idev = input_dev;
-	ati_remote->interface = interface;
-
-	usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
-	strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
-
-	if (udev->manufacturer)
-		strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
-
-	if (udev->product)
-		snprintf(ati_remote->name, sizeof(ati_remote->name),
-			 "%s %s", ati_remote->name, udev->product);
-
-	if (!strlen(ati_remote->name))
-		snprintf(ati_remote->name, sizeof(ati_remote->name),
-			DRIVER_DESC "(%04x,%04x)",
-			le16_to_cpu(ati_remote->udev->descriptor.idVendor),
-			le16_to_cpu(ati_remote->udev->descriptor.idProduct));
-
-	ati_remote_input_init(ati_remote);
-
-	/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
-	err = ati_remote_initialize(ati_remote);
-	if (err)
-		goto fail3;
-
-	/* Set up and register input device */
-	err = input_register_device(ati_remote->idev);
-	if (err)
-		goto fail3;
-
-	usb_set_intfdata(interface, ati_remote);
-	return 0;
-
- fail3:	usb_kill_urb(ati_remote->irq_urb);
-	usb_kill_urb(ati_remote->out_urb);
- fail2:	ati_remote_free_buffers(ati_remote);
- fail1:	input_free_device(input_dev);
-	kfree(ati_remote);
-	return err;
-}
-
-/*
- *	ati_remote_disconnect
- */
-static void ati_remote_disconnect(struct usb_interface *interface)
-{
-	struct ati_remote *ati_remote;
-
-	ati_remote = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-	if (!ati_remote) {
-		warn("%s - null device?\n", __FUNCTION__);
-		return;
-	}
-
-	usb_kill_urb(ati_remote->irq_urb);
-	usb_kill_urb(ati_remote->out_urb);
-	input_unregister_device(ati_remote->idev);
-	ati_remote_free_buffers(ati_remote);
-	kfree(ati_remote);
-}
-
-/*
- *	ati_remote_init
- */
-static int __init ati_remote_init(void)
-{
-	int result;
-
-	result = usb_register(&ati_remote_driver);
-	if (result)
-		err("usb_register error #%d\n", result);
-	else
-		info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
-
-	return result;
-}
-
-/*
- *	ati_remote_exit
- */
-static void __exit ati_remote_exit(void)
-{
-	usb_deregister(&ati_remote_driver);
-}
-
-/*
- *	module specification
- */
-
-module_init(ati_remote_init);
-module_exit(ati_remote_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c
deleted file mode 100644
index 1031543e5c3..00000000000
--- a/drivers/usb/input/ati_remote2.c
+++ /dev/null
@@ -1,543 +0,0 @@
-/*
- * ati_remote2 - ATI/Philips USB RF remote driver
- *
- * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
- * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#include <linux/usb/input.h>
-
-#define DRIVER_DESC    "ATI/Philips USB RF remote driver"
-#define DRIVER_VERSION "0.2"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
-MODULE_LICENSE("GPL");
-
-/*
- * ATI Remote Wonder II Channel Configuration
- *
- * The remote control can by assigned one of sixteen "channels" in order to facilitate
- * the use of multiple remote controls within range of each other.
- * A remote's "channel" may be altered by pressing and holding the "PC" button for
- * approximately 3 seconds, after which the button will slowly flash the count of the
- * currently configured "channel", using the numeric keypad enter a number between 1 and
- * 16 and then the "PC" button again, the button will slowly flash the count of the
- * newly configured "channel".
- */
-
-static unsigned int channel_mask = 0xFFFF;
-module_param(channel_mask, uint, 0644);
-MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
-
-static unsigned int mode_mask = 0x1F;
-module_param(mode_mask, uint, 0644);
-MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
-
-static struct usb_device_id ati_remote2_id_table[] = {
-	{ USB_DEVICE(0x0471, 0x0602) },	/* ATI Remote Wonder II */
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
-
-static struct {
-	int hw_code;
-	int key_code;
-} ati_remote2_key_table[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x0c, KEY_POWER },
-	{ 0x0d, KEY_MUTE },
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x20, KEY_CHANNELUP },
-	{ 0x21, KEY_CHANNELDOWN },
-	{ 0x28, KEY_FORWARD },
-	{ 0x29, KEY_REWIND },
-	{ 0x2c, KEY_PLAY },
-	{ 0x30, KEY_PAUSE },
-	{ 0x31, KEY_STOP },
-	{ 0x37, KEY_RECORD },
-	{ 0x38, KEY_DVD },
-	{ 0x39, KEY_TV },
-	{ 0x54, KEY_MENU },
-	{ 0x58, KEY_UP },
-	{ 0x59, KEY_DOWN },
-	{ 0x5a, KEY_LEFT },
-	{ 0x5b, KEY_RIGHT },
-	{ 0x5c, KEY_OK },
-	{ 0x78, KEY_A },
-	{ 0x79, KEY_B },
-	{ 0x7a, KEY_C },
-	{ 0x7b, KEY_D },
-	{ 0x7c, KEY_E },
-	{ 0x7d, KEY_F },
-	{ 0x82, KEY_ENTER },
-	{ 0x8e, KEY_VENDOR },
-	{ 0x96, KEY_COFFEE },
-	{ 0xa9, BTN_LEFT },
-	{ 0xaa, BTN_RIGHT },
-	{ 0xbe, KEY_QUESTION },
-	{ 0xd5, KEY_FRONT },
-	{ 0xd0, KEY_EDIT },
-	{ 0xf9, KEY_INFO },
-	{ (0x00 << 8) | 0x3f, KEY_PROG1 },
-	{ (0x01 << 8) | 0x3f, KEY_PROG2 },
-	{ (0x02 << 8) | 0x3f, KEY_PROG3 },
-	{ (0x03 << 8) | 0x3f, KEY_PROG4 },
-	{ (0x04 << 8) | 0x3f, KEY_PC },
-	{ 0, KEY_RESERVED }
-};
-
-struct ati_remote2 {
-	struct input_dev *idev;
-	struct usb_device *udev;
-
-	struct usb_interface *intf[2];
-	struct usb_endpoint_descriptor *ep[2];
-	struct urb *urb[2];
-	void *buf[2];
-	dma_addr_t buf_dma[2];
-
-	unsigned long jiffies;
-	int mode;
-
-	char name[64];
-	char phys[64];
-};
-
-static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote2_disconnect(struct usb_interface *interface);
-
-static struct usb_driver ati_remote2_driver = {
-	.name       = "ati_remote2",
-	.probe      = ati_remote2_probe,
-	.disconnect = ati_remote2_disconnect,
-	.id_table   = ati_remote2_id_table,
-};
-
-static int ati_remote2_open(struct input_dev *idev)
-{
-	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int r;
-
-	r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
-	if (r) {
-		dev_err(&ar2->intf[0]->dev,
-			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
-		return r;
-	}
-	r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
-	if (r) {
-		usb_kill_urb(ar2->urb[0]);
-		dev_err(&ar2->intf[1]->dev,
-			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
-		return r;
-	}
-
-	return 0;
-}
-
-static void ati_remote2_close(struct input_dev *idev)
-{
-	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-
-	usb_kill_urb(ar2->urb[0]);
-	usb_kill_urb(ar2->urb[1]);
-}
-
-static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
-{
-	struct input_dev *idev = ar2->idev;
-	u8 *data = ar2->buf[0];
-	int channel, mode;
-
-	channel = data[0] >> 4;
-
-	if (!((1 << channel) & channel_mask))
-		return;
-
-	mode = data[0] & 0x0F;
-
-	if (mode > 4) {
-		dev_err(&ar2->intf[0]->dev,
-			"Unknown mode byte (%02x %02x %02x %02x)\n",
-			data[3], data[2], data[1], data[0]);
-		return;
-	}
-
-	if (!((1 << mode) & mode_mask))
-		return;
-
-	input_event(idev, EV_REL, REL_X, (s8) data[1]);
-	input_event(idev, EV_REL, REL_Y, (s8) data[2]);
-	input_sync(idev);
-}
-
-static int ati_remote2_lookup(unsigned int hw_code)
-{
-	int i;
-
-	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
-		if (ati_remote2_key_table[i].hw_code == hw_code)
-			return i;
-
-	return -1;
-}
-
-static void ati_remote2_input_key(struct ati_remote2 *ar2)
-{
-	struct input_dev *idev = ar2->idev;
-	u8 *data = ar2->buf[1];
-	int channel, mode, hw_code, index;
-
-	channel = data[0] >> 4;
-
-	if (!((1 << channel) & channel_mask))
-		return;
-
-	mode = data[0] & 0x0F;
-
-	if (mode > 4) {
-		dev_err(&ar2->intf[1]->dev,
-			"Unknown mode byte (%02x %02x %02x %02x)\n",
-			data[3], data[2], data[1], data[0]);
-		return;
-	}
-
-	hw_code = data[2];
-	/*
-	 * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
-	 * Use the mode byte to figure out which one was pressed.
-	 */
-	if (hw_code == 0x3f) {
-		/*
-		 * For some incomprehensible reason the mouse pad generates
-		 * events which look identical to the events from the last
-		 * pressed mode key. Naturally we don't want to generate key
-		 * events for the mouse pad so we filter out any subsequent
-		 * events from the same mode key.
-		 */
-		if (ar2->mode == mode)
-			return;
-
-		if (data[1] == 0)
-			ar2->mode = mode;
-
-		hw_code |= mode << 8;
-	}
-
-	if (!((1 << mode) & mode_mask))
-		return;
-
-	index = ati_remote2_lookup(hw_code);
-	if (index < 0) {
-		dev_err(&ar2->intf[1]->dev,
-			"Unknown code byte (%02x %02x %02x %02x)\n",
-			data[3], data[2], data[1], data[0]);
-		return;
-	}
-
-	switch (data[1]) {
-	case 0:	/* release */
-		break;
-	case 1:	/* press */
-		ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
-		break;
-	case 2:	/* repeat */
-
-		/* No repeat for mouse buttons. */
-		if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
-		    ati_remote2_key_table[index].key_code == BTN_RIGHT)
-			return;
-
-		if (!time_after_eq(jiffies, ar2->jiffies))
-			return;
-
-		ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
-		break;
-	default:
-		dev_err(&ar2->intf[1]->dev,
-			"Unknown state byte (%02x %02x %02x %02x)\n",
-			data[3], data[2], data[1], data[0]);
-		return;
-	}
-
-	input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
-	input_sync(idev);
-}
-
-static void ati_remote2_complete_mouse(struct urb *urb)
-{
-	struct ati_remote2 *ar2 = urb->context;
-	int r;
-
-	switch (urb->status) {
-	case 0:
-		ati_remote2_input_mouse(ar2);
-		break;
-	case -ENOENT:
-	case -EILSEQ:
-	case -ECONNRESET:
-	case -ESHUTDOWN:
-		dev_dbg(&ar2->intf[0]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
-		return;
-	default:
-		dev_err(&ar2->intf[0]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
-	}
-
-	r = usb_submit_urb(urb, GFP_ATOMIC);
-	if (r)
-		dev_err(&ar2->intf[0]->dev,
-			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
-}
-
-static void ati_remote2_complete_key(struct urb *urb)
-{
-	struct ati_remote2 *ar2 = urb->context;
-	int r;
-
-	switch (urb->status) {
-	case 0:
-		ati_remote2_input_key(ar2);
-		break;
-	case -ENOENT:
-	case -EILSEQ:
-	case -ECONNRESET:
-	case -ESHUTDOWN:
-		dev_dbg(&ar2->intf[1]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
-		return;
-	default:
-		dev_err(&ar2->intf[1]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
-	}
-
-	r = usb_submit_urb(urb, GFP_ATOMIC);
-	if (r)
-		dev_err(&ar2->intf[1]->dev,
-			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
-}
-
-static int ati_remote2_input_init(struct ati_remote2 *ar2)
-{
-	struct input_dev *idev;
-	int i, retval;
-
-	idev = input_allocate_device();
-	if (!idev)
-		return -ENOMEM;
-
-	ar2->idev = idev;
-	input_set_drvdata(idev, ar2);
-
-	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
-	idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-	idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-	for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
-		set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
-
-	idev->rep[REP_DELAY]  = 250;
-	idev->rep[REP_PERIOD] = 33;
-
-	idev->open = ati_remote2_open;
-	idev->close = ati_remote2_close;
-
-	idev->name = ar2->name;
-	idev->phys = ar2->phys;
-
-	usb_to_input_id(ar2->udev, &idev->id);
-	idev->dev.parent = &ar2->udev->dev;
-
-	retval = input_register_device(idev);
-	if (retval)
-		input_free_device(idev);
-
-	return retval;
-}
-
-static int ati_remote2_urb_init(struct ati_remote2 *ar2)
-{
-	struct usb_device *udev = ar2->udev;
-	int i, pipe, maxp;
-
-	for (i = 0; i < 2; i++) {
-		ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
-		if (!ar2->buf[i])
-			return -ENOMEM;
-
-		ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
-		if (!ar2->urb[i])
-			return -ENOMEM;
-
-		pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
-		maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-		maxp = maxp > 4 ? 4 : maxp;
-
-		usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
-				 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
-				 ar2, ar2->ep[i]->bInterval);
-		ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
-		ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	}
-
-	return 0;
-}
-
-static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
-{
-	int i;
-
-	for (i = 0; i < 2; i++) {
-		usb_free_urb(ar2->urb[i]);
-		usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
-	}
-}
-
-static int ati_remote2_setup(struct ati_remote2 *ar2)
-{
-	int r, i, channel;
-
-	/*
-	 * Configure receiver to only accept input from remote "channel"
-	 *  channel == 0  -> Accept input from any remote channel
-	 *  channel == 1  -> Only accept input from remote channel 1
-	 *  channel == 2  -> Only accept input from remote channel 2
-	 *  ...
-	 *  channel == 16 -> Only accept input from remote channel 16
-	 */
-
-	channel = 0;
-	for (i = 0; i < 16; i++) {
-		if ((1 << i) & channel_mask) {
-			if (!(~(1 << i) & 0xFFFF & channel_mask))
-				channel = i + 1;
-			break;
-		}
-	}
-
-	r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
-			    0x20,
-			    USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			    channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (r) {
-		dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
-			__FUNCTION__, r);
-		return r;
-	}
-
-	return 0;
-}
-
-static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *alt = interface->cur_altsetting;
-	struct ati_remote2 *ar2;
-	int r;
-
-	if (alt->desc.bInterfaceNumber)
-		return -ENODEV;
-
-	ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
-	if (!ar2)
-		return -ENOMEM;
-
-	ar2->udev = udev;
-
-	ar2->intf[0] = interface;
-	ar2->ep[0] = &alt->endpoint[0].desc;
-
-	ar2->intf[1] = usb_ifnum_to_if(udev, 1);
-	r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
-	if (r)
-		goto fail1;
-	alt = ar2->intf[1]->cur_altsetting;
-	ar2->ep[1] = &alt->endpoint[0].desc;
-
-	r = ati_remote2_urb_init(ar2);
-	if (r)
-		goto fail2;
-
-	r = ati_remote2_setup(ar2);
-	if (r)
-		goto fail2;
-
-	usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
-	strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
-
-	strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
-
-	r = ati_remote2_input_init(ar2);
-	if (r)
-		goto fail2;
-
-	usb_set_intfdata(interface, ar2);
-
-	return 0;
-
- fail2:
-	ati_remote2_urb_cleanup(ar2);
-
-	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
- fail1:
-	kfree(ar2);
-
-	return r;
-}
-
-static void ati_remote2_disconnect(struct usb_interface *interface)
-{
-	struct ati_remote2 *ar2;
-	struct usb_host_interface *alt = interface->cur_altsetting;
-
-	if (alt->desc.bInterfaceNumber)
-		return;
-
-	ar2 = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	input_unregister_device(ar2->idev);
-
-	ati_remote2_urb_cleanup(ar2);
-
-	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
-
-	kfree(ar2);
-}
-
-static int __init ati_remote2_init(void)
-{
-	int r;
-
-	r = usb_register(&ati_remote2_driver);
-	if (r)
-		printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
-	else
-		printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
-
-	return r;
-}
-
-static void __exit ati_remote2_exit(void)
-{
-	usb_deregister(&ati_remote2_driver);
-}
-
-module_init(ati_remote2_init);
-module_exit(ati_remote2_exit);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
deleted file mode 100644
index 1bffc9fa98c..00000000000
--- a/drivers/usb/input/keyspan_remote.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * keyspan_remote: USB driver for the Keyspan DMR
- *
- * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * This driver has been put together with the support of Innosys, Inc.
- * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/input.h>
-
-#define DRIVER_VERSION	"v0.1"
-#define DRIVER_AUTHOR	"Michael Downey <downey@zymeta.com>"
-#define DRIVER_DESC	"Driver for the USB Keyspan remote control."
-#define DRIVER_LICENSE	"GPL"
-
-/* Parameters that can be passed to the driver. */
-static int debug;
-module_param(debug, int, 0444);
-MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
-
-/* Vendor and product ids */
-#define USB_KEYSPAN_VENDOR_ID		0x06CD
-#define USB_KEYSPAN_PRODUCT_UIA11	0x0202
-
-/* Defines for converting the data from the remote. */
-#define ZERO		0x18
-#define ZERO_MASK	0x1F	/* 5 bits for a 0 */
-#define ONE		0x3C
-#define ONE_MASK	0x3F	/* 6 bits for a 1 */
-#define SYNC		0x3F80
-#define SYNC_MASK	0x3FFF	/* 14 bits for a SYNC sequence */
-#define STOP		0x00
-#define STOP_MASK	0x1F	/* 5 bits for the STOP sequence */
-#define GAP		0xFF
-
-#define RECV_SIZE	8	/* The UIA-11 type have a 8 byte limit. */
-
-/* table of devices that work with this driver */
-static struct usb_device_id keyspan_table[] = {
-	{ USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
-	{ }					/* Terminating entry */
-};
-
-/* Structure to store all the real stuff that a remote sends to us. */
-struct keyspan_message {
-	u16	system;
-	u8	button;
-	u8	toggle;
-};
-
-/* Structure used for all the bit testing magic needed to be done. */
-struct bit_tester {
-	u32	tester;
-	int	len;
-	int	pos;
-	int	bits_left;
-	u8	buffer[32];
-};
-
-/* Structure to hold all of our driver specific stuff */
-struct usb_keyspan {
-	char				name[128];
-	char				phys[64];
-	struct usb_device*		udev;
-	struct input_dev		*input;
-	struct usb_interface*		interface;
-	struct usb_endpoint_descriptor* in_endpoint;
-	struct urb*			irq_urb;
-	int				open;
-	dma_addr_t			in_dma;
-	unsigned char*			in_buffer;
-
-	/* variables used to parse messages from remote. */
-	struct bit_tester		data;
-	int				stage;
-	int				toggle;
-};
-
-/*
- * Table that maps the 31 possible keycodes to input keys.
- * Currently there are 15 and 17 button models so RESERVED codes
- * are blank areas in the mapping.
- */
-static const int keyspan_key_table[] = {
-	KEY_RESERVED,		/* 0 is just a place holder. */
-	KEY_RESERVED,
-	KEY_STOP,
-	KEY_PLAYCD,
-	KEY_RESERVED,
-	KEY_PREVIOUSSONG,
-	KEY_REWIND,
-	KEY_FORWARD,
-	KEY_NEXTSONG,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_PAUSE,
-	KEY_VOLUMEUP,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_VOLUMEDOWN,
-	KEY_RESERVED,
-	KEY_UP,
-	KEY_RESERVED,
-	KEY_MUTE,
-	KEY_LEFT,
-	KEY_ENTER,
-	KEY_RIGHT,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_DOWN,
-	KEY_RESERVED,
-	KEY_KPASTERISK,
-	KEY_RESERVED,
-	KEY_MENU
-};
-
-static struct usb_driver keyspan_driver;
-
-/*
- * Debug routine that prints out what we've received from the remote.
- */
-static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
-{
-	char codes[4 * RECV_SIZE];
-	int i;
-
-	for (i = 0; i < RECV_SIZE; i++)
-		snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
-
-	dev_info(&dev->udev->dev, "%s\n", codes);
-}
-
-/*
- * Routine that manages the bit_tester structure.  It makes sure that there are
- * at least bits_needed bits loaded into the tester.
- */
-static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
-{
-	if (dev->data.bits_left >= bits_needed)
-		return 0;
-
-	/*
-	 * Somehow we've missed the last message. The message will be repeated
-	 * though so it's not too big a deal
-	 */
-	if (dev->data.pos >= dev->data.len) {
-		dev_dbg(&dev->udev->dev,
-			"%s - Error ran out of data. pos: %d, len: %d\n",
-			__FUNCTION__, dev->data.pos, dev->data.len);
-		return -1;
-	}
-
-	/* Load as much as we can into the tester. */
-	while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
-	       (dev->data.pos < dev->data.len)) {
-		dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
-		dev->data.bits_left += 8;
-	}
-
-	return 0;
-}
-
-/*
- * Routine that handles all the logic needed to parse out the message from the remote.
- */
-static void keyspan_check_data(struct usb_keyspan *remote)
-{
-	int i;
-	int found = 0;
-	struct keyspan_message message;
-
-	switch(remote->stage) {
-	case 0:
-		/*
-		 * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
-		 * So the first byte that isn't a FF should be the start of a new message.
-		 */
-		for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
-
-		if (i < RECV_SIZE) {
-			memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
-			remote->data.len = RECV_SIZE;
-			remote->data.pos = 0;
-			remote->data.tester = 0;
-			remote->data.bits_left = 0;
-			remote->stage = 1;
-		}
-		break;
-
-	case 1:
-		/*
-		 * Stage 1 we should have 16 bytes and should be able to detect a
-		 * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
-		 */
-		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
-		remote->data.len += RECV_SIZE;
-
-		found = 0;
-		while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
-			for (i = 0; i < 8; ++i) {
-				if (keyspan_load_tester(remote, 14) != 0) {
-					remote->stage = 0;
-					return;
-				}
-
-				if ((remote->data.tester & SYNC_MASK) == SYNC) {
-					remote->data.tester = remote->data.tester >> 14;
-					remote->data.bits_left -= 14;
-					found = 1;
-					break;
-				} else {
-					remote->data.tester = remote->data.tester >> 1;
-					--remote->data.bits_left;
-				}
-			}
-		}
-
-		if (!found) {
-			remote->stage = 0;
-			remote->data.len = 0;
-		} else {
-			remote->stage = 2;
-		}
-		break;
-
-	case 2:
-		/*
-		 * Stage 2 we should have 24 bytes which will be enough for a full
-		 * message.  We need to parse out the system code, button code,
-		 * toggle code, and stop.
-		 */
-		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
-		remote->data.len += RECV_SIZE;
-
-		message.system = 0;
-		for (i = 0; i < 9; i++) {
-			keyspan_load_tester(remote, 6);
-
-			if ((remote->data.tester & ZERO_MASK) == ZERO) {
-				message.system = message.system << 1;
-				remote->data.tester = remote->data.tester >> 5;
-				remote->data.bits_left -= 5;
-			} else if ((remote->data.tester & ONE_MASK) == ONE) {
-				message.system = (message.system << 1) + 1;
-				remote->data.tester = remote->data.tester >> 6;
-				remote->data.bits_left -= 6;
-			} else {
-				err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
-				remote->stage = 0;
-				return;
-			}
-		}
-
-		message.button = 0;
-		for (i = 0; i < 5; i++) {
-			keyspan_load_tester(remote, 6);
-
-			if ((remote->data.tester & ZERO_MASK) == ZERO) {
-				message.button = message.button << 1;
-				remote->data.tester = remote->data.tester >> 5;
-				remote->data.bits_left -= 5;
-			} else if ((remote->data.tester & ONE_MASK) == ONE) {
-				message.button = (message.button << 1) + 1;
-				remote->data.tester = remote->data.tester >> 6;
-				remote->data.bits_left -= 6;
-			} else {
-				err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
-				remote->stage = 0;
-				return;
-			}
-		}
-
-		keyspan_load_tester(remote, 6);
-		if ((remote->data.tester & ZERO_MASK) == ZERO) {
-			message.toggle = 0;
-			remote->data.tester = remote->data.tester >> 5;
-			remote->data.bits_left -= 5;
-		} else if ((remote->data.tester & ONE_MASK) == ONE) {
-			message.toggle = 1;
-			remote->data.tester = remote->data.tester >> 6;
-			remote->data.bits_left -= 6;
-		} else {
-			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
-			remote->stage = 0;
-			return;
-		}
-
-		keyspan_load_tester(remote, 5);
-		if ((remote->data.tester & STOP_MASK) == STOP) {
-			remote->data.tester = remote->data.tester >> 5;
-			remote->data.bits_left -= 5;
-		} else {
-			err("Bad message recieved, no stop bit found.\n");
-		}
-
-		dev_dbg(&remote->udev->dev,
-			"%s found valid message: system: %d, button: %d, toggle: %d\n",
-			__FUNCTION__, message.system, message.button, message.toggle);
-
-		if (message.toggle != remote->toggle) {
-			input_report_key(remote->input, keyspan_key_table[message.button], 1);
-			input_report_key(remote->input, keyspan_key_table[message.button], 0);
-			input_sync(remote->input);
-			remote->toggle = message.toggle;
-		}
-
-		remote->stage = 0;
-		break;
-	}
-}
-
-/*
- * Routine for sending all the initialization messages to the remote.
- */
-static int keyspan_setup(struct usb_device* dev)
-{
-	int retval = 0;
-
-	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
-	if (retval) {
-		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
-			__FUNCTION__, retval);
-		return(retval);
-	}
-
-	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
-	if (retval) {
-		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
-			__FUNCTION__, retval);
-		return(retval);
-	}
-
-	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
-	if (retval) {
-		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
-			__FUNCTION__, retval);
-		return(retval);
-	}
-
-	dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
-	return(retval);
-}
-
-/*
- * Routine used to handle a new message that has come in.
- */
-static void keyspan_irq_recv(struct urb *urb)
-{
-	struct usb_keyspan *dev = urb->context;
-	int retval;
-
-	/* Check our status in case we need to bail out early. */
-	switch (urb->status) {
-	case 0:
-		break;
-
-	/* Device went away so don't keep trying to read from it. */
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-
-	default:
-		goto resubmit;
-		break;
-	}
-
-	if (debug)
-		keyspan_print(dev);
-
-	keyspan_check_data(dev);
-
-resubmit:
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
-}
-
-static int keyspan_open(struct input_dev *dev)
-{
-	struct usb_keyspan *remote = input_get_drvdata(dev);
-
-	remote->irq_urb->dev = remote->udev;
-	if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void keyspan_close(struct input_dev *dev)
-{
-	struct usb_keyspan *remote = input_get_drvdata(dev);
-
-	usb_kill_urb(remote->irq_urb);
-}
-
-static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
-{
-
-	struct usb_endpoint_descriptor *endpoint;
-	int i;
-
-	for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
-		endpoint = &iface->endpoint[i].desc;
-
-		if (usb_endpoint_is_int_in(endpoint)) {
-			/* we found our interrupt in endpoint */
-			return endpoint;
-		}
-	}
-
-	return NULL;
-}
-
-/*
- * Routine that sets up the driver to handle a specific USB device detected on the bus.
- */
-static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_keyspan *remote;
-	struct input_dev *input_dev;
-	int i, error;
-
-	endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
-	if (!endpoint)
-		return -ENODEV;
-
-	remote = kzalloc(sizeof(*remote), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!remote || !input_dev) {
-		error = -ENOMEM;
-		goto fail1;
-	}
-
-	remote->udev = udev;
-	remote->input = input_dev;
-	remote->interface = interface;
-	remote->in_endpoint = endpoint;
-	remote->toggle = -1;	/* Set to -1 so we will always not match the toggle from the first remote message. */
-
-	remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
-	if (!remote->in_buffer) {
-		error = -ENOMEM;
-		goto fail1;
-	}
-
-	remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!remote->irq_urb) {
-		error = -ENOMEM;
-		goto fail2;
-	}
-
-	error = keyspan_setup(udev);
-	if (error) {
-		error = -ENODEV;
-		goto fail3;
-	}
-
-	if (udev->manufacturer)
-		strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
-
-	if (udev->product) {
-		if (udev->manufacturer)
-			strlcat(remote->name, " ", sizeof(remote->name));
-		strlcat(remote->name, udev->product, sizeof(remote->name));
-	}
-
-	if (!strlen(remote->name))
-		snprintf(remote->name, sizeof(remote->name),
-			 "USB Keyspan Remote %04x:%04x",
-			 le16_to_cpu(udev->descriptor.idVendor),
-			 le16_to_cpu(udev->descriptor.idProduct));
-
-	usb_make_path(udev, remote->phys, sizeof(remote->phys));
-	strlcat(remote->phys, "/input0", sizeof(remote->phys));
-
-	input_dev->name = remote->name;
-	input_dev->phys = remote->phys;
-	usb_to_input_id(udev, &input_dev->id);
-	input_dev->dev.parent = &interface->dev;
-
-	input_dev->evbit[0] = BIT(EV_KEY);		/* We will only report KEY events. */
-	for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
-		if (keyspan_key_table[i] != KEY_RESERVED)
-			set_bit(keyspan_key_table[i], input_dev->keybit);
-
-	input_set_drvdata(input_dev, remote);
-
-	input_dev->open = keyspan_open;
-	input_dev->close = keyspan_close;
-
-	/*
-	 * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
-	 */
-	usb_fill_int_urb(remote->irq_urb,
-			 remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
-			 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
-			 remote->in_endpoint->bInterval);
-	remote->irq_urb->transfer_dma = remote->in_dma;
-	remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* we can register the device now, as it is ready */
-	error = input_register_device(remote->input);
-	if (error)
-		goto fail3;
-
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, remote);
-
-	return 0;
-
- fail3:	usb_free_urb(remote->irq_urb);
- fail2:	usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
- fail1:	kfree(remote);
-	input_free_device(input_dev);
-
-	return error;
-}
-
-/*
- * Routine called when a device is disconnected from the USB.
- */
-static void keyspan_disconnect(struct usb_interface *interface)
-{
-	struct usb_keyspan *remote;
-
-	remote = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	if (remote) {	/* We have a valid driver structure so clean up everything we allocated. */
-		input_unregister_device(remote->input);
-		usb_kill_urb(remote->irq_urb);
-		usb_free_urb(remote->irq_urb);
-		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
-		kfree(remote);
-	}
-}
-
-/*
- * Standard driver set up sections
- */
-static struct usb_driver keyspan_driver =
-{
-	.name =		"keyspan_remote",
-	.probe =	keyspan_probe,
-	.disconnect =	keyspan_disconnect,
-	.id_table =	keyspan_table
-};
-
-static int __init usb_keyspan_init(void)
-{
-	int result;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&keyspan_driver);
-	if (result)
-		err("usb_register failed. Error number %d\n", result);
-
-	return result;
-}
-
-static void __exit usb_keyspan_exit(void)
-{
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&keyspan_driver);
-}
-
-module_init(usb_keyspan_init);
-module_exit(usb_keyspan_exit);
-
-MODULE_DEVICE_TABLE(usb, keyspan_table);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
deleted file mode 100644
index a424094d9fe..00000000000
--- a/drivers/usb/input/map_to_7segment.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * drivers/usb/input/map_to_7segment.h
- *
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef MAP_TO_7SEGMENT_H
-#define MAP_TO_7SEGMENT_H
-
-/* This file provides translation primitives and tables for the conversion
- * of (ASCII) characters to a 7-segments notation.
- *
- * The 7 segment's wikipedia notation below is used as standard.
- * See: http://en.wikipedia.org/wiki/Seven_segment_display
- *
- * Notation:	+-a-+
- *		f   b
- *		+-g-+
- *		e   c
- *		+-d-+
- *
- * Usage:
- *
- *   Register a map variable, and fill it with a character set:
- * 	static SEG7_DEFAULT_MAP(map_seg7);
- *
- *
- *   Then use for conversion:
- *	seg7 = map_to_seg7(&map_seg7, some_char);
- *	...
- *
- * In device drivers it is recommended, if required, to make the char map
- * accessible via the sysfs interface using the following scheme:
- *
- * static ssize_t show_map(struct device *dev, char *buf) {
- *	memcpy(buf, &map_seg7, sizeof(map_seg7));
- *	return sizeof(map_seg7);
- * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
- *	if(cnt != sizeof(map_seg7))
- *		return -EINVAL;
- *	memcpy(&map_seg7, buf, cnt);
- *	return cnt;
- * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
- *
- * History:
- * 2005-05-31	RFC linux-kernel@vger.kernel.org
- */
-#include <linux/errno.h>
-
-
-#define BIT_SEG7_A		0
-#define BIT_SEG7_B		1
-#define BIT_SEG7_C		2
-#define BIT_SEG7_D		3
-#define BIT_SEG7_E		4
-#define BIT_SEG7_F		5
-#define BIT_SEG7_G		6
-#define BIT_SEG7_RESERVED	7
-
-struct seg7_conversion_map {
-	unsigned char	table[128];
-};
-
-static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
-{
-	return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
-}
-
-#define SEG7_CONVERSION_MAP(_name, _map)	\
-	struct seg7_conversion_map _name = { .table = { _map } }
-
-/*
- * It is recommended to use a facility that allows user space to redefine
- * custom character sets for LCD devices. Please use a sysfs interface
- * as described above.
- */
-#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
-
-/*******************************************************************************
- * ASCII conversion table
- ******************************************************************************/
-
-#define _SEG7(l,a,b,c,d,e,f,g)	\
-      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
-	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
-
-#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-
-#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
- _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
- _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
- _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
- _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
- _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
-
-#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
- _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
- _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
- _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
- _SEG7('9',1,1,1,1,0,1,1),
-
-#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
- _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
- _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
- _SEG7('@',1,1,0,1,1,1,1),
-
-#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
- _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
- _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
- _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
- _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
- _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
-
-#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
- _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
- _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
- _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
- _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
- _SEG7('~',1,0,0,0,0,0,0),
-
-/* Maps */
-
-/* This set tries to map as close as possible to the visible characteristics
- * of the ASCII symbol, lowercase and uppercase letters may differ in
- * presentation on the display.
- */
-#define MAP_ASCII7SEG_ALPHANUM			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-/* This set tries to map as close as possible to the symbolic characteristics
- * of the ASCII character for maximum discrimination.
- * For now this means all alpha chars are in lower case representations.
- * (This for example facilitates the use of hex numbers with uppercase input.)
- */
-#define MAP_ASCII7SEG_ALPHANUM_LC			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-#define SEG7_DEFAULT_MAP(_name)		\
-	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
-
-#endif	/* MAP_TO_7SEGMENT_H */
-
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
deleted file mode 100644
index 448a470d28f..00000000000
--- a/drivers/usb/input/powermate.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- * A driver for the Griffin Technology, Inc. "PowerMate" USB controller dial.
- *
- * v1.1, (c)2002 William R Sowerbutts <will@sowerbutts.com>
- *
- * This device is a anodised aluminium knob which connects over USB. It can measure
- * clockwise and anticlockwise rotation. The dial also acts as a pushbutton with
- * a spring for automatic release. The base contains a pair of LEDs which illuminate
- * the translucent base. It rotates without limit and reports its relative rotation
- * back to the host when polled by the USB controller.
- *
- * Testing with the knob I have has shown that it measures approximately 94 "clicks"
- * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was
- * a variable speed cordless electric drill) has shown that the device can measure
- * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from
- * the host. If it counts more than 7 clicks before it is polled, it will wrap back
- * to zero and start counting again. This was at quite high speed, however, almost
- * certainly faster than the human hand could turn it. Griffin say that it loses a
- * pulse or two on a direction change; the granularity is so fine that I never
- * noticed this in practice.
- *
- * The device's microcontroller can be programmed to set the LED to either a constant
- * intensity, or to a rhythmic pulsing. Several patterns and speeds are available.
- *
- * Griffin were very happy to provide documentation and free hardware for development.
- *
- * Some userspace tools are available on the web: http://sowerbutts.com/powermate/
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/usb/input.h>
-
-#define POWERMATE_VENDOR	0x077d	/* Griffin Technology, Inc. */
-#define POWERMATE_PRODUCT_NEW	0x0410	/* Griffin PowerMate */
-#define POWERMATE_PRODUCT_OLD	0x04AA	/* Griffin soundKnob */
-
-#define CONTOUR_VENDOR		0x05f3	/* Contour Design, Inc. */
-#define CONTOUR_JOG		0x0240	/* Jog and Shuttle */
-
-/* these are the command codes we send to the device */
-#define SET_STATIC_BRIGHTNESS  0x01
-#define SET_PULSE_ASLEEP       0x02
-#define SET_PULSE_AWAKE        0x03
-#define SET_PULSE_MODE         0x04
-
-/* these refer to bits in the powermate_device's requires_update field. */
-#define UPDATE_STATIC_BRIGHTNESS (1<<0)
-#define UPDATE_PULSE_ASLEEP      (1<<1)
-#define UPDATE_PULSE_AWAKE       (1<<2)
-#define UPDATE_PULSE_MODE        (1<<3)
-
-/* at least two versions of the hardware exist, with differing payload
-   sizes. the first three bytes always contain the "interesting" data in
-   the relevant format. */
-#define POWERMATE_PAYLOAD_SIZE_MAX 6
-#define POWERMATE_PAYLOAD_SIZE_MIN 3
-struct powermate_device {
-	signed char *data;
-	dma_addr_t data_dma;
-	struct urb *irq, *config;
-	struct usb_ctrlrequest *configcr;
-	dma_addr_t configcr_dma;
-	struct usb_device *udev;
-	struct input_dev *input;
-	spinlock_t lock;
-	int static_brightness;
-	int pulse_speed;
-	int pulse_table;
-	int pulse_asleep;
-	int pulse_awake;
-	int requires_update; // physical settings which are out of sync
-	char phys[64];
-};
-
-static char pm_name_powermate[] = "Griffin PowerMate";
-static char pm_name_soundknob[] = "Griffin SoundKnob";
-
-static void powermate_config_complete(struct urb *urb);
-
-/* Callback for data arriving from the PowerMate over the USB interrupt pipe */
-static void powermate_irq(struct urb *urb)
-{
-	struct powermate_device *pm = urb->context;
-	int retval;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
-		goto exit;
-	}
-
-	/* handle updates to device state */
-	input_report_key(pm->input, BTN_0, pm->data[0] & 0x01);
-	input_report_rel(pm->input, REL_DIAL, pm->data[1]);
-	input_sync(pm->input);
-
-exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
-	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
-}
-
-/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
-static void powermate_sync_state(struct powermate_device *pm)
-{
-	if (pm->requires_update == 0)
-		return; /* no updates are required */
-	if (pm->config->status == -EINPROGRESS)
-		return; /* an update is already in progress; it'll issue this update when it completes */
-
-	if (pm->requires_update & UPDATE_PULSE_ASLEEP){
-		pm->configcr->wValue = cpu_to_le16( SET_PULSE_ASLEEP );
-		pm->configcr->wIndex = cpu_to_le16( pm->pulse_asleep ? 1 : 0 );
-		pm->requires_update &= ~UPDATE_PULSE_ASLEEP;
-	}else if (pm->requires_update & UPDATE_PULSE_AWAKE){
-		pm->configcr->wValue = cpu_to_le16( SET_PULSE_AWAKE );
-		pm->configcr->wIndex = cpu_to_le16( pm->pulse_awake ? 1 : 0 );
-		pm->requires_update &= ~UPDATE_PULSE_AWAKE;
-	}else if (pm->requires_update & UPDATE_PULSE_MODE){
-		int op, arg;
-		/* the powermate takes an operation and an argument for its pulse algorithm.
-		   the operation can be:
-		   0: divide the speed
-		   1: pulse at normal speed
-		   2: multiply the speed
-		   the argument only has an effect for operations 0 and 2, and ranges between
-		   1 (least effect) to 255 (maximum effect).
-
-		   thus, several states are equivalent and are coalesced into one state.
-
-		   we map this onto a range from 0 to 510, with:
-		   0 -- 254    -- use divide (0 = slowest)
-		   255         -- use normal speed
-		   256 -- 510  -- use multiple (510 = fastest).
-
-		   Only values of 'arg' quite close to 255 are particularly useful/spectacular.
-		*/
-		if (pm->pulse_speed < 255) {
-			op = 0;                   // divide
-			arg = 255 - pm->pulse_speed;
-		} else if (pm->pulse_speed > 255) {
-			op = 2;                   // multiply
-			arg = pm->pulse_speed - 255;
-		} else {
-			op = 1;                   // normal speed
-			arg = 0;                  // can be any value
-		}
-		pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE );
-		pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op );
-		pm->requires_update &= ~UPDATE_PULSE_MODE;
-	} else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) {
-		pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS );
-		pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
-		pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
-	} else {
-		printk(KERN_ERR "powermate: unknown update required");
-		pm->requires_update = 0; /* fudge the bug */
-		return;
-	}
-
-/*	printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */
-
-	pm->configcr->bRequestType = 0x41; /* vendor request */
-	pm->configcr->bRequest = 0x01;
-	pm->configcr->wLength = 0;
-
-	usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0),
-			     (void *) pm->configcr, NULL, 0,
-			     powermate_config_complete, pm);
-	pm->config->setup_dma = pm->configcr_dma;
-	pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP;
-
-	if (usb_submit_urb(pm->config, GFP_ATOMIC))
-		printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
-}
-
-/* Called when our asynchronous control message completes. We may need to issue another immediately */
-static void powermate_config_complete(struct urb *urb)
-{
-	struct powermate_device *pm = urb->context;
-	unsigned long flags;
-
-	if (urb->status)
-		printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
-
-	spin_lock_irqsave(&pm->lock, flags);
-	powermate_sync_state(pm);
-	spin_unlock_irqrestore(&pm->lock, flags);
-}
-
-/* Set the LED up as described and begin the sync with the hardware if required */
-static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed,
-				int pulse_table, int pulse_asleep, int pulse_awake)
-{
-	unsigned long flags;
-
-	if (pulse_speed < 0)
-		pulse_speed = 0;
-	if (pulse_table < 0)
-		pulse_table = 0;
-	if (pulse_speed > 510)
-		pulse_speed = 510;
-	if (pulse_table > 2)
-		pulse_table = 2;
-
-	pulse_asleep = !!pulse_asleep;
-	pulse_awake = !!pulse_awake;
-
-
-	spin_lock_irqsave(&pm->lock, flags);
-
-	/* mark state updates which are required */
-	if (static_brightness != pm->static_brightness) {
-		pm->static_brightness = static_brightness;
-		pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
-	}
-	if (pulse_asleep != pm->pulse_asleep) {
-		pm->pulse_asleep = pulse_asleep;
-		pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS);
-	}
-	if (pulse_awake != pm->pulse_awake) {
-		pm->pulse_awake = pulse_awake;
-		pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS);
-	}
-	if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) {
-		pm->pulse_speed = pulse_speed;
-		pm->pulse_table = pulse_table;
-		pm->requires_update |= UPDATE_PULSE_MODE;
-	}
-
-	powermate_sync_state(pm);
-
-	spin_unlock_irqrestore(&pm->lock, flags);
-}
-
-/* Callback from the Input layer when an event arrives from userspace to configure the LED */
-static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value)
-{
-	unsigned int command = (unsigned int)_value;
-	struct powermate_device *pm = input_get_drvdata(dev);
-
-	if (type == EV_MSC && code == MSC_PULSELED){
-		/*
-		    bits  0- 7: 8 bits: LED brightness
-		    bits  8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster.
-		    bits 17-18: 2 bits: pulse table (0, 1, 2 valid)
-		    bit     19: 1 bit : pulse whilst asleep?
-		    bit     20: 1 bit : pulse constantly?
-		*/
-		int static_brightness = command & 0xFF;   // bits 0-7
-		int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16
-		int pulse_table = (command >> 17) & 0x3;  // bits 17-18
-		int pulse_asleep = (command >> 19) & 0x1; // bit 19
-		int pulse_awake  = (command >> 20) & 0x1; // bit 20
-
-		powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake);
-	}
-
-	return 0;
-}
-
-static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
-{
-	pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
-				    GFP_ATOMIC, &pm->data_dma);
-	if (!pm->data)
-		return -1;
-
-	pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
-					GFP_ATOMIC, &pm->configcr_dma);
-	if (!pm->configcr)
-		return -1;
-
-	return 0;
-}
-
-static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm)
-{
-	usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
-			pm->data, pm->data_dma);
-	usb_buffer_free(udev, sizeof(*(pm->configcr)),
-			pm->configcr, pm->configcr_dma);
-}
-
-/* Called whenever a USB device matching one in our supported devices table is connected */
-static int powermate_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev (intf);
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct powermate_device *pm;
-	struct input_dev *input_dev;
-	int pipe, maxp;
-	int error = -ENOMEM;
-
-	interface = intf->cur_altsetting;
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(endpoint))
-		return -EIO;
-
-	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-		0x0a, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		0, interface->desc.bInterfaceNumber, NULL, 0,
-		USB_CTRL_SET_TIMEOUT);
-
-	pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!pm || !input_dev)
-		goto fail1;
-
-	if (powermate_alloc_buffers(udev, pm))
-		goto fail2;
-
-	pm->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pm->irq)
-		goto fail2;
-
-	pm->config = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pm->config)
-		goto fail3;
-
-	pm->udev = udev;
-	pm->input = input_dev;
-
-	usb_make_path(udev, pm->phys, sizeof(pm->phys));
-	strlcpy(pm->phys, "/input0", sizeof(pm->phys));
-
-	spin_lock_init(&pm->lock);
-
-	switch (le16_to_cpu(udev->descriptor.idProduct)) {
-	case POWERMATE_PRODUCT_NEW:
-		input_dev->name = pm_name_powermate;
-		break;
-	case POWERMATE_PRODUCT_OLD:
-		input_dev->name = pm_name_soundknob;
-		break;
-	default:
-		input_dev->name = pm_name_soundknob;
-		printk(KERN_WARNING "powermate: unknown product id %04x\n",
-		       le16_to_cpu(udev->descriptor.idProduct));
-	}
-
-	input_dev->phys = pm->phys;
-	usb_to_input_id(udev, &input_dev->id);
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, pm);
-
-	input_dev->event = powermate_input_event;
-
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
-	input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
-	input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
-	input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
-
-	/* get a handle to the interrupt data pipe */
-	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-
-	if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
-		printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
-			POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
-		maxp = POWERMATE_PAYLOAD_SIZE_MAX;
-	}
-
-	usb_fill_int_urb(pm->irq, udev, pipe, pm->data,
-			 maxp, powermate_irq,
-			 pm, endpoint->bInterval);
-	pm->irq->transfer_dma = pm->data_dma;
-	pm->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* register our interrupt URB with the USB system */
-	if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
-		error = -EIO;
-		goto fail4;
-	}
-
-	error = input_register_device(pm->input);
-	if (error)
-		goto fail5;
-
-
-	/* force an update of everything */
-	pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
-	powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters
-
-	usb_set_intfdata(intf, pm);
-	return 0;
-
- fail5:	usb_kill_urb(pm->irq);
- fail4:	usb_free_urb(pm->config);
- fail3:	usb_free_urb(pm->irq);
- fail2:	powermate_free_buffers(udev, pm);
- fail1:	input_free_device(input_dev);
-	kfree(pm);
-	return error;
-}
-
-/* Called when a USB device we've accepted ownership of is removed */
-static void powermate_disconnect(struct usb_interface *intf)
-{
-	struct powermate_device *pm = usb_get_intfdata (intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (pm) {
-		pm->requires_update = 0;
-		usb_kill_urb(pm->irq);
-		input_unregister_device(pm->input);
-		usb_free_urb(pm->irq);
-		usb_free_urb(pm->config);
-		powermate_free_buffers(interface_to_usbdev(intf), pm);
-
-		kfree(pm);
-	}
-}
-
-static struct usb_device_id powermate_devices [] = {
-	{ USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_NEW) },
-	{ USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_OLD) },
-	{ USB_DEVICE(CONTOUR_VENDOR, CONTOUR_JOG) },
-	{ } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, powermate_devices);
-
-static struct usb_driver powermate_driver = {
-        .name =         "powermate",
-        .probe =        powermate_probe,
-        .disconnect =   powermate_disconnect,
-        .id_table =     powermate_devices,
-};
-
-static int __init powermate_init(void)
-{
-	return usb_register(&powermate_driver);
-}
-
-static void __exit powermate_cleanup(void)
-{
-	usb_deregister(&powermate_driver);
-}
-
-module_init(powermate_init);
-module_exit(powermate_cleanup);
-
-MODULE_AUTHOR( "William R Sowerbutts" );
-MODULE_DESCRIPTION( "Griffin Technology, Inc PowerMate driver" );
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
deleted file mode 100644
index fc645b29918..00000000000
--- a/drivers/usb/input/yealink.c
+++ /dev/null
@@ -1,1004 +0,0 @@
-/*
- * drivers/usb/input/yealink.c
- *
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/*
- * Description:
- *   Driver for the USB-P1K voip usb phone.
- *   This device is produced by Yealink Network Technology Co Ltd
- *   but may be branded under several names:
- *	- Yealink usb-p1k
- *	- Tiptel 115
- *	- ...
- *
- * This driver is based on:
- *   - the usbb2k-api	http://savannah.nongnu.org/projects/usbb2k-api/
- *   - information from	http://memeteau.free.fr/usbb2k
- *   - the xpad-driver	drivers/usb/input/xpad.c
- *
- * Thanks to:
- *   - Olivier Vandorpe, for providing the usbb2k-api.
- *   - Martin Diehl, for spotting my memory allocation bug.
- *
- * History:
- *   20050527 henk	First version, functional keyboard. Keyboard events
- *			will pop-up on the ../input/eventX bus.
- *   20050531 henk	Added led, LCD, dialtone and sysfs interface.
- *   20050610 henk	Cleanups, make it ready for public consumption.
- *   20050630 henk	Cleanups, fixes in response to comments.
- *   20050701 henk	sysfs write serialisation, fix potential unload races
- *   20050801 henk	Added ringtone, restructure USB
- *   20050816 henk	Merge 2.6.13-rc6
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/rwsem.h>
-#include <linux/usb/input.h>
-
-#include "map_to_7segment.h"
-#include "yealink.h"
-
-#define DRIVER_VERSION "yld-20051230"
-#define DRIVER_AUTHOR "Henk Vergonet"
-#define DRIVER_DESC "Yealink phone driver"
-
-#define YEALINK_POLLING_FREQUENCY	10	/* in [Hz] */
-
-struct yld_status {
-	u8	lcd[24];
-	u8	led;
-	u8	dialtone;
-	u8	ringtone;
-	u8	keynum;
-} __attribute__ ((packed));
-
-/*
- * Register the LCD segment and icon map
- */
-#define _LOC(k,l)	{ .a = (k), .m = (l) }
-#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm)	\
-	{ .type	= (t),							\
-	  .u = { .s = {	_LOC(a, am), _LOC(b, bm), _LOC(c, cm),		\
-		        _LOC(d, dm), _LOC(e, em), _LOC(g, gm),		\
-			_LOC(f, fm) } } }
-#define _PIC(t, h, hm, n)						\
-	{ .type	= (t),							\
- 	  .u = { .p = { .name = (n), .a = (h), .m = (hm) } } }
-
-static const struct lcd_segment_map {
-	char	type;
-	union {
-		struct pictogram_map {
-			u8	a,m;
-			char	name[10];
-		}	p;
-		struct segment_map {
-			u8	a,m;
-		} s[7];
-	} u;
-} lcdMap[] = {
-#include "yealink.h"
-};
-
-struct yealink_dev {
-	struct input_dev *idev;		/* input device */
-	struct usb_device *udev;	/* usb device */
-
-	/* irq input channel */
-	struct yld_ctl_packet	*irq_data;
-	dma_addr_t		irq_dma;
-	struct urb		*urb_irq;
-
-	/* control output channel */
-	struct yld_ctl_packet	*ctl_data;
-	dma_addr_t		ctl_dma;
-	struct usb_ctrlrequest	*ctl_req;
-	dma_addr_t		ctl_req_dma;
-	struct urb		*urb_ctl;
-
-	char phys[64];			/* physical device path */
-
-	u8 lcdMap[ARRAY_SIZE(lcdMap)];	/* state of LCD, LED ... */
-	int key_code;			/* last reported key	 */
-
-	int	stat_ix;
-	union {
-		struct yld_status s;
-		u8		  b[sizeof(struct yld_status)];
-	} master, copy;
-};
-
-
-/*******************************************************************************
- * Yealink lcd interface
- ******************************************************************************/
-
-/*
- * Register a default 7 segment character set
- */
-static SEG7_DEFAULT_MAP(map_seg7);
-
- /* Display a char,
-  * char '\9' and '\n' are placeholders and do not overwrite the original text.
-  * A space will always hide an icon.
-  */
-static int setChar(struct yealink_dev *yld, int el, int chr)
-{
-	int i, a, m, val;
-
-	if (el >= ARRAY_SIZE(lcdMap))
-		return -EINVAL;
-
-	if (chr == '\t' || chr == '\n')
-	    return 0;
-
-	yld->lcdMap[el] = chr;
-
-	if (lcdMap[el].type == '.') {
-		a = lcdMap[el].u.p.a;
-		m = lcdMap[el].u.p.m;
-		if (chr != ' ')
-			yld->master.b[a] |= m;
-		else
-			yld->master.b[a] &= ~m;
-		return 0;
-	}
-
-	val = map_to_seg7(&map_seg7, chr);
-	for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) {
-		m = lcdMap[el].u.s[i].m;
-
-		if (m == 0)
-			continue;
-
-		a = lcdMap[el].u.s[i].a;
-		if (val & 1)
-			yld->master.b[a] |= m;
-		else
-			yld->master.b[a] &= ~m;
-		val = val >> 1;
-	}
-	return 0;
-};
-
-/*******************************************************************************
- * Yealink key interface
- ******************************************************************************/
-
-/* Map device buttons to internal key events.
- *
- * USB-P1K button layout:
- *
- *             up
- *       IN           OUT
- *            down
- *
- *     pickup   C    hangup
- *       1      2      3
- *       4      5      6
- *       7      8      9
- *       *      0      #
- *
- * The "up" and "down" keys, are symbolised by arrows on the button.
- * The "pickup" and "hangup" keys are symbolised by a green and red phone
- * on the button.
- */
-static int map_p1k_to_key(int scancode)
-{
-	switch(scancode) {		/* phone key:	*/
-	case 0x23: return KEY_LEFT;	/*   IN		*/
-	case 0x33: return KEY_UP;	/*   up		*/
-	case 0x04: return KEY_RIGHT;	/*   OUT	*/
-	case 0x24: return KEY_DOWN;	/*   down	*/
-	case 0x03: return KEY_ENTER;	/*   pickup	*/
-	case 0x14: return KEY_BACKSPACE; /*  C		*/
-	case 0x13: return KEY_ESC;	/*   hangup	*/
-	case 0x00: return KEY_1;	/*   1		*/
-	case 0x01: return KEY_2;	/*   2 		*/
-	case 0x02: return KEY_3;	/*   3		*/
-	case 0x10: return KEY_4;	/*   4		*/
-	case 0x11: return KEY_5;	/*   5		*/
-	case 0x12: return KEY_6;	/*   6		*/
-	case 0x20: return KEY_7;	/*   7		*/
-	case 0x21: return KEY_8;	/*   8		*/
-	case 0x22: return KEY_9;	/*   9		*/
-	case 0x30: return KEY_KPASTERISK; /* *		*/
-	case 0x31: return KEY_0;	/*   0		*/
-	case 0x32: return KEY_LEFTSHIFT |
-			  KEY_3 << 8;	/*   #		*/
-	}
-	return -EINVAL;
-}
-
-/* Completes a request by converting the data into events for the
- * input subsystem.
- *
- * The key parameter can be cascaded: key2 << 8 | key1
- */
-static void report_key(struct yealink_dev *yld, int key)
-{
-	struct input_dev *idev = yld->idev;
-
-	if (yld->key_code >= 0) {
-		/* old key up */
-		input_report_key(idev, yld->key_code & 0xff, 0);
-		if (yld->key_code >> 8)
-			input_report_key(idev, yld->key_code >> 8, 0);
-	}
-
-	yld->key_code = key;
-	if (key >= 0) {
-		/* new valid key */
-		input_report_key(idev, key & 0xff, 1);
-		if (key >> 8)
-			input_report_key(idev, key >> 8, 1);
-	}
-	input_sync(idev);
-}
-
-/*******************************************************************************
- * Yealink usb communication interface
- ******************************************************************************/
-
-static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p)
-{
-	u8	*buf = (u8 *)p;
-	int	i;
-	u8	sum = 0;
-
-	for(i=0; i<USB_PKT_LEN-1; i++)
-		sum -= buf[i];
-	p->sum = sum;
-	return usb_control_msg(yld->udev,
-			usb_sndctrlpipe(yld->udev, 0),
-			USB_REQ_SET_CONFIGURATION,
-			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			0x200, 3,
-			p, sizeof(*p),
-			USB_CTRL_SET_TIMEOUT);
-}
-
-static u8 default_ringtone[] = {
-	0xEF,			/* volume [0-255] */
-	0xFB, 0x1E, 0x00, 0x0C,	/* 1250 [hz], 12/100 [s] */
-	0xFC, 0x18, 0x00, 0x0C,	/* 1000 [hz], 12/100 [s] */
-	0xFB, 0x1E, 0x00, 0x0C,
-	0xFC, 0x18, 0x00, 0x0C,
-	0xFB, 0x1E, 0x00, 0x0C,
-	0xFC, 0x18, 0x00, 0x0C,
-	0xFB, 0x1E, 0x00, 0x0C,
-	0xFC, 0x18, 0x00, 0x0C,
-	0xFF, 0xFF, 0x01, 0x90,	/* silent, 400/100 [s] */
-	0x00, 0x00		/* end of sequence */
-};
-
-static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size)
-{
-	struct yld_ctl_packet *p = yld->ctl_data;
-	int	ix, len;
-
-	if (size <= 0)
-		return -EINVAL;
-
-	/* Set the ringtone volume */
-	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
-	yld->ctl_data->cmd	= CMD_RING_VOLUME;
-	yld->ctl_data->size	= 1;
-	yld->ctl_data->data[0]	= buf[0];
-	yealink_cmd(yld, p);
-
-	buf++;
-	size--;
-
-	p->cmd = CMD_RING_NOTE;
-	ix = 0;
-	while (size != ix) {
-		len = size - ix;
-		if (len > sizeof(p->data))
-			len = sizeof(p->data);
-		p->size	  = len;
-		p->offset = cpu_to_be16(ix);
-		memcpy(p->data, &buf[ix], len);
-		yealink_cmd(yld, p);
-		ix += len;
-	}
-	return 0;
-}
-
-/* keep stat_master & stat_copy in sync.
- */
-static int yealink_do_idle_tasks(struct yealink_dev *yld)
-{
-	u8 val;
-	int i, ix, len;
-
-	ix = yld->stat_ix;
-
-	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
-	yld->ctl_data->cmd  = CMD_KEYPRESS;
-	yld->ctl_data->size = 1;
-	yld->ctl_data->sum  = 0xff - CMD_KEYPRESS;
-
-	/* If state update pointer wraps do a KEYPRESS first. */
-	if (ix >= sizeof(yld->master)) {
-		yld->stat_ix = 0;
-		return 0;
-	}
-
-	/* find update candidates: copy != master */
-	do {
-		val = yld->master.b[ix];
-		if (val != yld->copy.b[ix])
-			goto send_update;
-	} while (++ix < sizeof(yld->master));
-
-	/* nothing todo, wait a bit and poll for a KEYPRESS */
-	yld->stat_ix = 0;
-	/* TODO how can we wait abit. ??
-	 * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY);
-	 */
-	return 0;
-
-send_update:
-
-	/* Setup an appropriate update request */
-	yld->copy.b[ix] = val;
-	yld->ctl_data->data[0] = val;
-
-	switch(ix) {
-	case offsetof(struct yld_status, led):
-		yld->ctl_data->cmd	= CMD_LED;
-		yld->ctl_data->sum	= -1 - CMD_LED - val;
-		break;
-	case offsetof(struct yld_status, dialtone):
-		yld->ctl_data->cmd	= CMD_DIALTONE;
-		yld->ctl_data->sum	= -1 - CMD_DIALTONE - val;
-		break;
-	case offsetof(struct yld_status, ringtone):
-		yld->ctl_data->cmd	= CMD_RINGTONE;
-		yld->ctl_data->sum	= -1 - CMD_RINGTONE - val;
-		break;
-	case offsetof(struct yld_status, keynum):
-		val--;
-		val &= 0x1f;
-		yld->ctl_data->cmd	= CMD_SCANCODE;
-		yld->ctl_data->offset	= cpu_to_be16(val);
-		yld->ctl_data->data[0]	= 0;
-		yld->ctl_data->sum	= -1 - CMD_SCANCODE - val;
-		break;
-	default:
-		len = sizeof(yld->master.s.lcd) - ix;
-		if (len > sizeof(yld->ctl_data->data))
-			len = sizeof(yld->ctl_data->data);
-
-		/* Combine up to <len> consecutive LCD bytes in a singe request
-		 */
-		yld->ctl_data->cmd	= CMD_LCD;
-		yld->ctl_data->offset	= cpu_to_be16(ix);
-		yld->ctl_data->size	= len;
-		yld->ctl_data->sum	= -CMD_LCD - ix - val - len;
-		for(i=1; i<len; i++) {
-			ix++;
-			val = yld->master.b[ix];
-			yld->copy.b[ix]		= val;
-			yld->ctl_data->data[i]	= val;
-			yld->ctl_data->sum     -= val;
-		}
-	}
-	yld->stat_ix = ix + 1;
-	return 1;
-}
-
-/* Decide on how to handle responses
- *
- * The state transition diagram is somethhing like:
- *
- *          syncState<--+
- *               |      |
- *               |    idle
- *              \|/     |
- * init --ok--> waitForKey --ok--> getKey
- *  ^               ^                |
- *  |               +-------ok-------+
- * error,start
- *
- */
-static void urb_irq_callback(struct urb *urb)
-{
-	struct yealink_dev *yld = urb->context;
-	int ret;
-
-	if (urb->status)
-		err("%s - urb status %d", __FUNCTION__, urb->status);
-
-	switch (yld->irq_data->cmd) {
-	case CMD_KEYPRESS:
-
-		yld->master.s.keynum = yld->irq_data->data[0];
-		break;
-
-	case CMD_SCANCODE:
-		dbg("get scancode %x", yld->irq_data->data[0]);
-
-		report_key(yld, map_p1k_to_key(yld->irq_data->data[0]));
-		break;
-
-	default:
-		err("unexpected response %x", yld->irq_data->cmd);
-	}
-
-	yealink_do_idle_tasks(yld);
-
-	ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
-	if (ret)
-		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
-}
-
-static void urb_ctl_callback(struct urb *urb)
-{
-	struct yealink_dev *yld = urb->context;
-	int ret;
-
-	if (urb->status)
-		err("%s - urb status %d", __FUNCTION__, urb->status);
-
-	switch (yld->ctl_data->cmd) {
-	case CMD_KEYPRESS:
-	case CMD_SCANCODE:
-		/* ask for a response */
-		ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
-		break;
-	default:
-		/* send new command */
-		yealink_do_idle_tasks(yld);
-		ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
-	}
-
-	if (ret)
-		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
-}
-
-/*******************************************************************************
- * input event interface
- ******************************************************************************/
-
-/* TODO should we issue a ringtone on a SND_BELL event?
-static int input_ev(struct input_dev *dev, unsigned int type,
-		unsigned int code, int value)
-{
-
-	if (type != EV_SND)
-		return -EINVAL;
-
-	switch (code) {
-	case SND_BELL:
-	case SND_TONE:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-*/
-
-static int input_open(struct input_dev *dev)
-{
-	struct yealink_dev *yld = input_get_drvdata(dev);
-	int i, ret;
-
-	dbg("%s", __FUNCTION__);
-
-	/* force updates to device */
-	for (i = 0; i<sizeof(yld->master); i++)
-		yld->copy.b[i] = ~yld->master.b[i];
-	yld->key_code = -1;	/* no keys pressed */
-
-        yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone));
-
-	/* issue INIT */
-	memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
-	yld->ctl_data->cmd	= CMD_INIT;
-	yld->ctl_data->size	= 10;
-	yld->ctl_data->sum	= 0x100-CMD_INIT-10;
-	if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
-		dbg("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, ret);
-		return ret;
-	}
-	return 0;
-}
-
-static void input_close(struct input_dev *dev)
-{
-	struct yealink_dev *yld = input_get_drvdata(dev);
-
-	usb_kill_urb(yld->urb_ctl);
-	usb_kill_urb(yld->urb_irq);
-}
-
-/*******************************************************************************
- * sysfs interface
- ******************************************************************************/
-
-static DECLARE_RWSEM(sysfs_rwsema);
-
-/* Interface to the 7-segments translation table aka. char set.
- */
-static ssize_t show_map(struct device *dev, struct device_attribute *attr,
-				char *buf)
-{
-	memcpy(buf, &map_seg7, sizeof(map_seg7));
-	return sizeof(map_seg7);
-}
-
-static ssize_t store_map(struct device *dev, struct device_attribute *attr,
-				const char *buf, size_t cnt)
-{
-	if (cnt != sizeof(map_seg7))
-		return -EINVAL;
-	memcpy(&map_seg7, buf, sizeof(map_seg7));
-	return sizeof(map_seg7);
-}
-
-/* Interface to the LCD.
- */
-
-/* Reading /sys/../lineX will return the format string with its settings:
- *
- * Example:
- * cat ./line3
- * 888888888888
- * Linux Rocks!
- */
-static ssize_t show_line(struct device *dev, char *buf, int a, int b)
-{
-	struct yealink_dev *yld;
-	int i;
-
-	down_read(&sysfs_rwsema);
-	yld = dev_get_drvdata(dev);
-	if (yld == NULL) {
-		up_read(&sysfs_rwsema);
-		return -ENODEV;
-	}
-
-	for (i = a; i < b; i++)
-		*buf++ = lcdMap[i].type;
-	*buf++ = '\n';
-	for (i = a; i < b; i++)
-		*buf++ = yld->lcdMap[i];
-	*buf++ = '\n';
-	*buf = 0;
-
-	up_read(&sysfs_rwsema);
-	return 3 + ((b - a) << 1);
-}
-
-static ssize_t show_line1(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET);
-}
-
-static ssize_t show_line2(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET);
-}
-
-static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
-}
-
-/* Writing to /sys/../lineX will set the coresponding LCD line.
- * - Excess characters are ignored.
- * - If less characters are written than allowed, the remaining digits are
- *   unchanged.
- * - The '\n' or '\t' char is a placeholder, it does not overwrite the
- *   original content.
- */
-static ssize_t store_line(struct device *dev, const char *buf, size_t count,
-		int el, size_t len)
-{
-	struct yealink_dev *yld;
-	int i;
-
-	down_write(&sysfs_rwsema);
-	yld = dev_get_drvdata(dev);
-	if (yld == NULL) {
-		up_write(&sysfs_rwsema);
-		return -ENODEV;
-	}
-
-	if (len > count)
-		len = count;
-	for (i = 0; i < len; i++)
-		setChar(yld, el++, buf[i]);
-
-	up_write(&sysfs_rwsema);
-	return count;
-}
-
-static ssize_t store_line1(struct device *dev, struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE);
-}
-
-static ssize_t store_line2(struct device *dev, struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE);
-}
-
-static ssize_t store_line3(struct device *dev, struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE);
-}
-
-/* Interface to visible and audible "icons", these include:
- * pictures on the LCD, the LED, and the dialtone signal.
- */
-
-/* Get a list of "switchable elements" with their current state. */
-static ssize_t get_icons(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	struct yealink_dev *yld;
-	int i, ret = 1;
-
-	down_read(&sysfs_rwsema);
-	yld = dev_get_drvdata(dev);
-	if (yld == NULL) {
-		up_read(&sysfs_rwsema);
-		return -ENODEV;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
-		if (lcdMap[i].type != '.')
-			continue;
-		ret += sprintf(&buf[ret], "%s %s\n",
-				yld->lcdMap[i] == ' ' ? "  " : "on",
-				lcdMap[i].u.p.name);
-	}
-	up_read(&sysfs_rwsema);
-	return ret;
-}
-
-/* Change the visibility of a particular element. */
-static ssize_t set_icon(struct device *dev, const char *buf, size_t count,
-			int chr)
-{
-	struct yealink_dev *yld;
-	int i;
-
-	down_write(&sysfs_rwsema);
-	yld = dev_get_drvdata(dev);
-	if (yld == NULL) {
-		up_write(&sysfs_rwsema);
-		return -ENODEV;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
-		if (lcdMap[i].type != '.')
-			continue;
-		if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) {
-			setChar(yld, i, chr);
-			break;
-		}
-	}
-
-	up_write(&sysfs_rwsema);
-	return count;
-}
-
-static ssize_t show_icon(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	return set_icon(dev, buf, count, buf[0]);
-}
-
-static ssize_t hide_icon(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	return set_icon(dev, buf, count, ' ');
-}
-
-/* Upload a ringtone to the device.
- */
-
-/* Stores raw ringtone data in the phone */
-static ssize_t store_ringtone(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct yealink_dev *yld;
-
-	down_write(&sysfs_rwsema);
-	yld = dev_get_drvdata(dev);
-	if (yld == NULL) {
-		up_write(&sysfs_rwsema);
-		return -ENODEV;
-	}
-
-	/* TODO locking with async usb control interface??? */
-	yealink_set_ringtone(yld, (char *)buf, count);
-	up_write(&sysfs_rwsema);
-	return count;
-}
-
-#define _M444	S_IRUGO
-#define _M664	S_IRUGO|S_IWUSR|S_IWGRP
-#define _M220	S_IWUSR|S_IWGRP
-
-static DEVICE_ATTR(map_seg7	, _M664, show_map	, store_map	);
-static DEVICE_ATTR(line1	, _M664, show_line1	, store_line1	);
-static DEVICE_ATTR(line2	, _M664, show_line2	, store_line2	);
-static DEVICE_ATTR(line3	, _M664, show_line3	, store_line3	);
-static DEVICE_ATTR(get_icons	, _M444, get_icons	, NULL		);
-static DEVICE_ATTR(show_icon	, _M220, NULL		, show_icon	);
-static DEVICE_ATTR(hide_icon	, _M220, NULL		, hide_icon	);
-static DEVICE_ATTR(ringtone	, _M220, NULL		, store_ringtone);
-
-static struct attribute *yld_attributes[] = {
-	&dev_attr_line1.attr,
-	&dev_attr_line2.attr,
-	&dev_attr_line3.attr,
-	&dev_attr_get_icons.attr,
-	&dev_attr_show_icon.attr,
-	&dev_attr_hide_icon.attr,
-	&dev_attr_map_seg7.attr,
-	&dev_attr_ringtone.attr,
-	NULL
-};
-
-static struct attribute_group yld_attr_group = {
-	.attrs = yld_attributes
-};
-
-/*******************************************************************************
- * Linux interface and usb initialisation
- ******************************************************************************/
-
-struct driver_info {
-	char *name;
-};
-
-static const struct driver_info info_P1K = {
-	.name	= "Yealink usb-p1k",
-};
-
-static const struct usb_device_id usb_table [] = {
-	{
-		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
-						USB_DEVICE_ID_MATCH_INT_INFO,
-		.idVendor		= 0x6993,
-		.idProduct		= 0xb001,
-		.bInterfaceClass	= USB_CLASS_HID,
-		.bInterfaceSubClass	= 0,
-		.bInterfaceProtocol	= 0,
-		.driver_info		= (kernel_ulong_t)&info_P1K
-	},
-	{ }
-};
-
-static int usb_cleanup(struct yealink_dev *yld, int err)
-{
-	if (yld == NULL)
-		return err;
-
-	usb_kill_urb(yld->urb_irq);	/* parameter validation in core/urb */
-	usb_kill_urb(yld->urb_ctl);	/* parameter validation in core/urb */
-
-        if (yld->idev) {
-		if (err)
-			input_free_device(yld->idev);
-		else
-			input_unregister_device(yld->idev);
-	}
-
-	usb_free_urb(yld->urb_irq);
-	usb_free_urb(yld->urb_ctl);
-
-	usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
-			yld->ctl_req, yld->ctl_req_dma);
-	usb_buffer_free(yld->udev, USB_PKT_LEN,
-			yld->ctl_data, yld->ctl_dma);
-	usb_buffer_free(yld->udev, USB_PKT_LEN,
-			yld->irq_data, yld->irq_dma);
-
-	kfree(yld);
-	return err;
-}
-
-static void usb_disconnect(struct usb_interface *intf)
-{
-	struct yealink_dev *yld;
-
-	down_write(&sysfs_rwsema);
-	yld = usb_get_intfdata(intf);
-	sysfs_remove_group(&intf->dev.kobj, &yld_attr_group);
-	usb_set_intfdata(intf, NULL);
-	up_write(&sysfs_rwsema);
-
-	usb_cleanup(yld, 0);
-}
-
-static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev (intf);
-	struct driver_info *nfo = (struct driver_info *)id->driver_info;
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct yealink_dev *yld;
-	struct input_dev *input_dev;
-	int ret, pipe, i;
-
-	interface = intf->cur_altsetting;
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(endpoint))
-		return -ENODEV;
-
-	yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
-	if (!yld)
-		return -ENOMEM;
-
-	yld->udev = udev;
-
-	yld->idev = input_dev = input_allocate_device();
-	if (!input_dev)
-		return usb_cleanup(yld, -ENOMEM);
-
-	/* allocate usb buffers */
-	yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					GFP_ATOMIC, &yld->irq_dma);
-	if (yld->irq_data == NULL)
-		return usb_cleanup(yld, -ENOMEM);
-
-	yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					GFP_ATOMIC, &yld->ctl_dma);
-	if (!yld->ctl_data)
-		return usb_cleanup(yld, -ENOMEM);
-
-	yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
-					GFP_ATOMIC, &yld->ctl_req_dma);
-	if (yld->ctl_req == NULL)
-		return usb_cleanup(yld, -ENOMEM);
-
-	/* allocate urb structures */
-	yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
-        if (yld->urb_irq == NULL)
-		return usb_cleanup(yld, -ENOMEM);
-
-	yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
-        if (yld->urb_ctl == NULL)
-		return usb_cleanup(yld, -ENOMEM);
-
-	/* get a handle to the interrupt data pipe */
-	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
-	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-	if (ret != USB_PKT_LEN)
-		err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
-
-	/* initialise irq urb */
-	usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
-			USB_PKT_LEN,
-			urb_irq_callback,
-			yld, endpoint->bInterval);
-	yld->urb_irq->transfer_dma = yld->irq_dma;
-	yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	yld->urb_irq->dev = udev;
-
-	/* initialise ctl urb */
-	yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
-				      USB_DIR_OUT;
-	yld->ctl_req->bRequest	= USB_REQ_SET_CONFIGURATION;
-	yld->ctl_req->wValue	= cpu_to_le16(0x200);
-	yld->ctl_req->wIndex	= cpu_to_le16(interface->desc.bInterfaceNumber);
-	yld->ctl_req->wLength	= cpu_to_le16(USB_PKT_LEN);
-
-	usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
-			(void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
-			urb_ctl_callback, yld);
-	yld->urb_ctl->setup_dma	= yld->ctl_req_dma;
-	yld->urb_ctl->transfer_dma	= yld->ctl_dma;
-	yld->urb_ctl->transfer_flags	|= URB_NO_SETUP_DMA_MAP |
-					URB_NO_TRANSFER_DMA_MAP;
-	yld->urb_ctl->dev = udev;
-
-	/* find out the physical bus location */
-	usb_make_path(udev, yld->phys, sizeof(yld->phys));
-	strlcat(yld->phys,  "/input0", sizeof(yld->phys));
-
-	/* register settings for the input device */
-	input_dev->name = nfo->name;
-	input_dev->phys = yld->phys;
-	usb_to_input_id(udev, &input_dev->id);
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, yld);
-
-	input_dev->open = input_open;
-	input_dev->close = input_close;
-	/* input_dev->event = input_ev;	TODO */
-
-	/* register available key events */
-	input_dev->evbit[0] = BIT(EV_KEY);
-	for (i = 0; i < 256; i++) {
-		int k = map_p1k_to_key(i);
-		if (k >= 0) {
-			set_bit(k & 0xff, input_dev->keybit);
-			if (k >> 8)
-				set_bit(k >> 8, input_dev->keybit);
-		}
-	}
-
-	ret = input_register_device(yld->idev);
-	if (ret)
-		return usb_cleanup(yld, ret);
-
-	usb_set_intfdata(intf, yld);
-
-	/* clear visible elements */
-	for (i = 0; i < ARRAY_SIZE(lcdMap); i++)
-		setChar(yld, i, ' ');
-
-	/* display driver version on LCD line 3 */
-	store_line3(&intf->dev, NULL,
-			DRIVER_VERSION, sizeof(DRIVER_VERSION));
-
-	/* Register sysfs hooks (don't care about failure) */
-	ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
-	return 0;
-}
-
-static struct usb_driver yealink_driver = {
-	.name		= "yealink",
-	.probe		= usb_probe,
-	.disconnect	= usb_disconnect,
-	.id_table	= usb_table,
-};
-
-static int __init yealink_dev_init(void)
-{
-	int ret = usb_register(&yealink_driver);
-	if (ret == 0)
-		info(DRIVER_DESC ":" DRIVER_VERSION);
-	return ret;
-}
-
-static void __exit yealink_dev_exit(void)
-{
-	usb_deregister(&yealink_driver);
-}
-
-module_init(yealink_dev_init);
-module_exit(yealink_dev_exit);
-
-MODULE_DEVICE_TABLE (usb, usb_table);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/yealink.h b/drivers/usb/input/yealink.h
deleted file mode 100644
index 48af0be9cbd..00000000000
--- a/drivers/usb/input/yealink.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * drivers/usb/input/yealink.h
- *
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef INPUT_YEALINK_H
-#define INPUT_YEALINK_H
-
-/* Using the control channel on interface 3 various aspects of the phone
- * can be controlled like LCD, LED, dialtone and the ringtone.
- */
-
-struct yld_ctl_packet {
-	u8	cmd;		/* command code, see below */
-	u8	size;		/* 1-11, size of used data bytes. */
-	u16	offset;		/* internal packet offset */
-	u8	data[11];
-	s8	sum;		/* negative sum of 15 preceding bytes */
-} __attribute__ ((packed));
-
-#define USB_PKT_LEN	sizeof(struct yld_ctl_packet)
-
-/* The following yld_ctl_packet's are available: */
-
-/* Init registers
- *
- * cmd		0x8e
- * size		10
- * offset	0
- * data		0,0,0,0....
- */
-#define CMD_INIT		0x8e
-
-/* Request key scan
- *
- * cmd		0x80
- * size		1
- * offset	0
- * data[0]	on return returns the key number, if it changes there's a new
- * 		key pressed.
- */
-#define CMD_KEYPRESS		0x80
-
-/* Request scancode
- *
- * cmd		0x81
- * size		1
- * offset	key number [0-1f]
- * data[0]	on return returns the scancode
- */
-#define CMD_SCANCODE		0x81
-
-/* Set LCD
- *
- * cmd		0x04
- * size		1-11
- * offset	0-23
- * data		segment bits
- */
-#define CMD_LCD			0x04
-
-/* Set led
- *
- * cmd		0x05
- * size		1
- * offset	0
- * data[0]	0 OFF / 1 ON
- */
-#define CMD_LED			0x05
-
-/* Set ringtone volume
- *
- * cmd		0x11
- * size		1
- * offset	0
- * data[0]	0-0xff  volume
- */
-#define CMD_RING_VOLUME		0x11
-
-/* Set ringtone notes
- *
- * cmd		0x02
- * size		1-11
- * offset	0->
- * data		binary representation LE16(-freq), LE16(duration) ....
- */
-#define CMD_RING_NOTE		0x02
-
-/* Sound ringtone via the speaker on the back
- *
- * cmd		0x03
- * size		1
- * offset	0
- * data[0]	0 OFF / 0x24 ON
- */
-#define CMD_RINGTONE		0x03
-
-/* Sound dial tone via the ear speaker
- *
- * cmd		0x09
- * size		1
- * offset	0
- * data[0]	0 OFF / 1 ON
- */
-#define CMD_DIALTONE		0x09
-
-#endif /* INPUT_YEALINK_H */
-
-
-#if defined(_SEG) && defined(_PIC)
-/* This table maps the LCD segments onto individual bit positions in the
- * yld_status struct.
- */
-
-/* LCD, each segment must be driven seperately.
- *
- * Layout:
- *
- *   |[]   [][]   [][]   [][]   in   |[][]
- *   |[] M [][] D [][] : [][]   out  |[][]
- *                             store
- *
- *    NEW REP         SU MO TU WE TH FR SA
- *
- *    [] [] [] [] [] [] [] [] [] [] [] []
- *    [] [] [] [] [] [] [] [] [] [] [] []
- */
-
-/* Line 1
- *	Format		: 18.e8.M8.88...188
- *	Icon names	: M D : IN OUT STORE
- */
-#define LCD_LINE1_OFFSET	0
-#define LCD_LINE1_SIZE		17
-
-/* Note: first g then f =>			       !      !      */
-/* _SEG(    type    a      b      c      d      e      g      f   )  */
-	_SEG('1',  0,0 , 22,2 , 22,2 ,  0,0 ,  0,0 ,  0,0 ,  0,0	),
-	_SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1	),
-	_PIC('.', 22,1 , "M"						),
-	_SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1	),
-	_SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1	),
-	_PIC('.', 15,8 , "D"						),
-	_SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1	),
-	_SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1	),
-	_PIC('.', 11,8 , ":"						),
-	_SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1	),
-	_SEG('8',  8,1 ,  8,2 ,  8,4 ,  8,8 ,  9,4 ,  9,2 ,  9,1	),
-	_PIC('.',  7,1 , "IN"						),
-	_PIC('.',  7,2 , "OUT"						),
-	_PIC('.',  7,4 , "STORE"					),
-	_SEG('1',  0,0 ,  5,1 ,  5,1 ,  0,0 ,  0,0 ,  0,0 ,  0,0	),
-	_SEG('8',  4,1 ,  4,2 ,  4,4 ,  4,8 ,  5,8 ,  5,4 ,  5,2	),
-	_SEG('8',  2,1 ,  2,2 ,  2,4 ,  2,8 ,  3,4 ,  3,2 ,  3,1	),
-
-/* Line 2
- *	Format		: .........
- *	Pict. name	: NEW REP SU MO TU WE TH FR SA
- */
-#define LCD_LINE2_OFFSET	LCD_LINE1_OFFSET + LCD_LINE1_SIZE
-#define LCD_LINE2_SIZE		9
-
-	_PIC('.', 23,2 , "NEW"	),
-	_PIC('.', 23,4 , "REP"	),
-	_PIC('.',  1,8 , "SU"	),
-	_PIC('.',  1,4 , "MO"	),
-	_PIC('.',  1,2 , "TU"	),
-	_PIC('.',  1,1 , "WE"	),
-	_PIC('.',  0,1 , "TH"	),
-	_PIC('.',  0,2 , "FR"	),
-	_PIC('.',  0,4 , "SA"	),
-
-/* Line 3
- *	Format		: 888888888888
- */
-#define LCD_LINE3_OFFSET	LCD_LINE2_OFFSET + LCD_LINE2_SIZE
-#define LCD_LINE3_SIZE		12
-
-	_SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32  ),
-	_SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32  ),
-	_SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32  ),
-	_SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32  ),
-	_SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32  ),
-	_SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32  ),
-	_SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32  ),
-	_SEG('8',  8,16,  8,32,  8,64,  8,128,  9,128,  9,64,  9,32  ),
-	_SEG('8',  6,16,  6,32,  6,64,  6,128,  7,128,  7,64,  7,32  ),
-	_SEG('8',  4,16,  4,32,  4,64,  4,128,  5,128,  5,64,  5,32  ),
-	_SEG('8',  2,16,  2,32,  2,64,  2,128,  3,128,  3,64,  3,32  ),
-	_SEG('8',  0,16,  0,32,  0,64,  0,128,  1,128,  1,64,  1,32  ),
-
-/* Line 4
- *
- * The LED, DIALTONE and RINGTONE are implemented as icons and use the same
- * sysfs interface.
- */
-#define LCD_LINE4_OFFSET	LCD_LINE3_OFFSET + LCD_LINE3_SIZE
-
-	_PIC('.', offsetof(struct yld_status, led)	, 0x01, "LED" ),
-	_PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ),
-	_PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ),
-
-#undef _SEG
-#undef _PIC
-#endif /* _SEG && _PIC */