aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2007-01-08 16:18:05 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2007-02-07 15:44:35 -0800
commitf3f4906516a084bbd9aa3da7592e6b029fe78f5b (patch)
tree129dbc126c9728c55c90159d3038adf7db9ccd11 /drivers/usb
parent85a975d0ce48dfa8dec5bf1bd970f8fd2c48af32 (diff)
usb-storage: SCSI level fixes
This patch (as835) removes from usb-storage the code which sets all devices to a SCSI level of at least SCSI-2. The original reasons for doing this no longer apply, and in fact it prevents certain kinds of ATA pass-thru commands from being used. The patch also marks CB and CBI devices that are SCSI-0 (legacy SCSI) as being single-LUN, since the combined SCSI-over-USB transport protocol has no way to convey LUN information to these devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/storage/scsiglue.c31
1 files changed, 13 insertions, 18 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index e1072d52d64..70234f5dbee 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -110,23 +110,6 @@ static int slave_configure(struct scsi_device *sdev)
* the end, scatter-gather buffers follow page boundaries. */
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
- /* Set the SCSI level to at least 2. We'll leave it at 3 if that's
- * what is originally reported. We need this to avoid confusing
- * the SCSI layer with devices that report 0 or 1, but need 10-byte
- * commands (ala ATAPI devices behind certain bridges, or devices
- * which simply have broken INQUIRY data).
- *
- * NOTE: This means /dev/sg programs (ala cdrecord) will get the
- * actual information. This seems to be the preference for
- * programs like that.
- *
- * NOTE: This also means that /proc/scsi/scsi and sysfs may report
- * the actual value or the modified one, depending on where the
- * data comes from.
- */
- if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
-
/* Many devices have trouble transfering more than 32KB at a time,
* while others have trouble with more than 64K. At this time we
* are limiting both to 32K (64 sectores).
@@ -176,7 +159,9 @@ static int slave_configure(struct scsi_device *sdev)
* a Get-Max-LUN request, we won't lose much by setting the
* revision level down to 2. The only devices that would be
* affected are those with sparse LUNs. */
- sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
+ if (sdev->scsi_level > SCSI_2)
+ sdev->sdev_target->scsi_level =
+ sdev->scsi_level = SCSI_2;
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
@@ -194,6 +179,16 @@ static int slave_configure(struct scsi_device *sdev)
sdev->use_10_for_ms = 1;
}
+ /* The CB and CBI transports have no way to pass LUN values
+ * other than the bits in the second byte of a CDB. But those
+ * bits don't get set to the LUN value if the device reports
+ * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
+ * be single-LUN.
+ */
+ if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+ sdev->scsi_level == SCSI_UNKNOWN)
+ us->max_lun = 0;
+
/* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
* REMOVAL command, so suppress those commands. */
if (us->flags & US_FL_NOT_LOCKABLE)