aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/video/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/video/Kconfig')
-rw-r--r--drivers/video/Kconfig1497
1 files changed, 1497 insertions, 0 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
new file mode 100644
index 00000000000..2a1c5965de2
--- /dev/null
+++ b/drivers/video/Kconfig
@@ -0,0 +1,1497 @@
+#
+# Video configuration
+#
+
+menu "Graphics support"
+
+config FB
+ tristate "Support for frame buffer devices"
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_SOFT_CURSOR
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the soft_cursor function for generic software cursor support.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_MACMODES
+ tristate
+ depends on FB
+ default n
+
+config FB_MODE_HELPERS
+ bool "Enable Video Mode Handling Helpers"
+ depends on FB
+ default n
+ ---help---
+ This enables functions for handling video modes using the
+ Generalized Timing Formula and the EDID parser. A few drivers rely
+ on this feature such as the radeonfb, rivafb, and the i810fb. If
+ your driver does not take advantage of this feature, choosing Y will
+ just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+ bool "Enable Tile Blitting Support"
+ depends on FB
+ default n
+ ---help---
+ This enables tile blitting. Tile blitting is a drawing technique
+ where the screen is divided into rectangular sections (tiles), whereas
+ the standard blitting divides the screen into pixels. Because the
+ default drawing element is a tile, drawing functions will be passed
+ parameters in terms of number of tiles instead of number of pixels.
+ For example, to draw a single character, instead of using bitmaps,
+ an index to an array of bitmaps will be used. To clear or move a
+ rectangular section of a screen, the rectangle will be described in
+ terms of number of tiles in the x- and y-axis.
+
+ This is particularly important to one driver, matroxfb. If
+ unsure, say N.
+
+config FB_CIRRUS
+ tristate "Cirrus Logic support"
+ depends on FB && (ZORRO || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ This enables support for Cirrus Logic GD542x/543x based boards on
+ Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+ If you have a PCI-based system, this enables support for these
+ chips: GD-543x, GD-544x, GD-5480.
+
+ Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+ Say N unless you have such a graphics board or plan to get one
+ before you next recompile the kernel.
+
+config FB_PM2
+ tristate "Permedia2 support"
+ depends on FB && ((AMIGA && BROKEN) || PCI)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Permedia2 AGP frame
+ buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
+ product page at
+ <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+
+config FB_PM2_FIFO_DISCONNECT
+ bool "enable FIFO disconnect feature"
+ depends on FB_PM2 && PCI
+ help
+ Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+
+config FB_ARMCLCD
+ tristate "ARM PrimeCell PL110 support"
+ depends on FB && ARM && ARM_AMBA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This framebuffer device driver is for the ARM PrimeCell PL110
+ Colour LCD controller. ARM PrimeCells provide the building
+ blocks for System on a Chip devices.
+
+ If you want to compile this as a module (=code which can be
+ inserted into and removed from the running kernel), say M
+ here and read <file:Documentation/modules.txt>. The module
+ will be called amba-clcd.
+
+config FB_ACORN
+ bool "Acorn VIDC support"
+ depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Acorn VIDC graphics
+ hardware found in Acorn RISC PCs and other ARM-based machines. If
+ unsure, say N.
+
+config FB_CLPS711X
+ bool "CLPS711X LCD support"
+ depends on (FB = y) && ARM && ARCH_CLPS711X
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+
+config FB_SA1100
+ bool "SA-1100 LCD support"
+ depends on (FB = y) && ARM && ARCH_SA1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is a framebuffer device for the SA-1100 LCD Controller.
+ See <http://www.linux-fbdev.org/> for information on framebuffer
+ devices.
+
+ If you plan to use the LCD display with your SA-1100 system, say
+ Y here.
+
+config FB_CYBER2000
+ tristate "CyberPro 2000/2010/5000 support"
+ depends on FB && PCI && (BROKEN || !SPARC64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This enables support for the Integraphics CyberPro 20x0 and 5000
+ VGA chips used in the Rebel.com Netwinder and other machines.
+ Say Y if you have a NetWinder or a graphics card containing this
+ device, otherwise say N.
+
+config FB_APOLLO
+ bool
+ depends on (FB = y) && APOLLO
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+
+config FB_Q40
+ bool
+ depends on (FB = y) && Q40
+ default y
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+
+config FB_AMIGA
+ tristate "Amiga native chipset support"
+ depends on FB && AMIGA
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Amigas.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amifb.
+
+config FB_AMIGA_OCS
+ bool "Amiga OCS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the original Agnus and Denise video chips,
+ found in the Amiga 1000 and most A500's and A2000's. If you intend
+ to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+ bool "Amiga ECS chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Enhanced Chip Set, found in later
+ A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+ you intend to run Linux on any of these systems, say Y; otherwise
+ say N.
+
+config FB_AMIGA_AGA
+ bool "Amiga AGA chipset support"
+ depends on FB_AMIGA
+ help
+ This enables support for the Advanced Graphics Architecture (also
+ known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+ and CD32. If you intend to run Linux on any of these systems, say Y;
+ otherwise say N.
+
+config FB_CYBER
+ tristate "Amiga CyberVision 64 support"
+ depends on FB && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This enables support for the Cybervision 64 graphics card from
+ Phase5. Please note that its use is not all that intuitive (i.e. if
+ you have any questions, be sure to ask!). Say N unless you have a
+ Cybervision 64 or plan to get one before you next recompile the
+ kernel. Please note that this driver DOES NOT support the
+ Cybervision 64/3D card, as they use incompatible video chips.
+
+config FB_VIRGE
+ bool "Amiga CyberVision 64/3D support "
+ depends on (FB = y) && ZORRO && BROKEN
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This enables support for the Cybervision 64/3D graphics card from
+ Phase5. Please note that its use is not all that intuitive (i.e. if
+ you have any questions, be sure to ask!). Say N unless you have a
+ Cybervision 64/3D or plan to get one before you next recompile the
+ kernel. Please note that this driver DOES NOT support the older
+ Cybervision 64 card, as they use incompatible video chips.
+
+config FB_RETINAZ3
+ tristate "Amiga Retina Z3 support"
+ depends on (FB = y) && ZORRO && BROKEN
+ help
+ This enables support for the Retina Z3 graphics card. Say N unless
+ you have a Retina Z3 or plan to get one before you next recompile
+ the kernel.
+
+config FB_FM2
+ bool "Amiga FrameMaster II/Rainbow II support"
+ depends on (FB = y) && ZORRO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Amiga FrameMaster
+ card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ATARI
+ bool "Atari native chipset support"
+ depends on (FB = y) && ATARI && BROKEN
+ help
+ This is the frame buffer device driver for the builtin graphics
+ chipset found in Ataris.
+
+config FB_OF
+ bool "Open Firmware frame buffer device support"
+ depends on (FB = y) && (PPC64 || PPC_OF)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES
+ help
+ Say Y if you want support with Open Firmware for your graphics
+ board.
+
+config FB_CONTROL
+ bool "Apple \"control\" display support"
+ depends on (FB = y) && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the graphics adapter in the
+ Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+ bool "Apple \"platinum\" display support"
+ depends on (FB = y) && PPC_PMAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "platinum" graphics
+ adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+ bool "Apple \"valkyrie\" display support"
+ depends on (FB = y) && (MAC || PPC_PMAC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES
+ help
+ This driver supports a frame buffer for the "valkyrie" graphics
+ adapter in some Power Macintoshes.
+
+config FB_CT65550
+ bool "Chips 65550 display support"
+ depends on (FB = y) && PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Chips & Technologies
+ 65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+ bool "Chips 69000 display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+
+config FB_IMSTT
+ bool "IMS Twin Turbo display support"
+ depends on (FB = y) && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
+ help
+ The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+ many Macintosh and compatible computers.
+
+config FB_S3TRIO
+ bool "S3 Trio display support"
+ depends on (FB = y) && PPC && BROKEN
+ help
+ If you have a S3 Trio say Y. Say N for S3 Virge.
+
+config FB_VGA16
+ tristate "VGA 16-color graphics support"
+ depends on FB && (X86 || PPC)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for VGA 16 color graphic
+ cards. Say Y if you have such a card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vga16fb.
+
+config FB_STI
+ tristate "HP STI frame buffer device support"
+ depends on FB && PARISC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ default y
+ ---help---
+ STI refers to the HP "Standard Text Interface" which is a set of
+ BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+ Enabling this option will implement the linux framebuffer device
+ using calls to the STI BIOS routines for initialisation.
+
+ If you enable this option, you will get a planar framebuffer device
+ /dev/fb which will work on the most common HP graphic cards of the
+ NGLE family, including the artist chips (in the 7xx and Bxxx series),
+ HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+ It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+ bool "Generic Macintosh display support"
+ depends on (FB = y) && MAC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES
+
+# bool ' Apple DAFB display support' CONFIG_FB_DAFB
+config FB_HP300
+ bool
+ depends on (FB = y) && HP300
+ select FB_CFB_FILLRECT
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ default y
+
+config FB_TGA
+ tristate "TGA framebuffer support"
+ depends on FB && ALPHA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for generic TGA graphic
+ cards. Say Y if you have one of those.
+
+config FB_VESA
+ bool "VESA VGA graphics support"
+ depends on (FB = y) && (X86 || X86_64)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for generic VESA 2.0
+ compliant graphic cards. The older VESA 1.2 cards are not supported.
+ You will get a boot time penguin logo at no additional cost. Please
+ read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config VIDEO_SELECT
+ bool
+ depends on FB_VESA
+ default y
+
+config FB_HGA
+ tristate "Hercules mono graphics support"
+ depends on FB && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Say Y here if you have a Hercules mono graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hgafb.
+
+ As this card technology is 15 years old, most people will answer N
+ here.
+
+config FB_HGA_ACCEL
+ bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
+ depends on FB_HGA && EXPERIMENTAL
+ ---help---
+ This will compile the Hercules mono graphics with
+ acceleration functions.
+
+
+config VIDEO_SELECT
+ bool
+ depends on (FB = y) && X86
+ default y
+
+config FB_SGIVW
+ tristate "SGI Visual Workstation framebuffer support"
+ depends on FB && X86_VISWS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ SGI Visual Workstation support for framebuffer graphics.
+
+config FB_GBE
+ bool "SGI Graphics Backend frame buffer support"
+ depends on (FB = y) && (SGI_IP32 || X86_VISWS)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for SGI Graphics Backend.
+ This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+ int "Video memory size in MB"
+ depends on FB_GBE
+ default 8
+ help
+ This is the amount of memory reserved for the framebuffer,
+ which can be any value between 1MB and 8MB.
+
+config BUS_I2C
+ bool
+ depends on (FB = y) && VISWS
+ default y
+
+config FB_SUN3
+ bool "Sun3 framebuffer support"
+ depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+
+config FB_BW2
+ bool "BWtwo support"
+ depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+ bool "CGthree support"
+ depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+ bool "CGsix (GX,TurboGX) support"
+ depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the CGsix (GX, TurboGX)
+ frame buffer.
+
+config FB_PVR2
+ tristate "NEC PowerVR 2 display support"
+ depends on FB && SH_DREAMCAST
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ Say Y here if you have a PowerVR 2 card in your box. If you plan to
+ run linux on your Dreamcast, you will have to say Y here.
+ This driver may or may not work on other PowerVR 2 cards, but is
+ totally untested. Use at your own risk. If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pvr2fb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=pvr2:XXX", where
+ the meaning of XXX can be found at the end of the main source file
+ (<file:drivers/video/pvr2fb.c>). Please see the file
+ <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_EPSON1355
+ bool "Epson 1355 framebuffer support"
+ depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Build in support for the SED1355 Epson Research Embedded RAMDAC
+ LCD/CRT Controller (since redesignated as the S1D13505) as a
+ framebuffer. Product specs at
+ <http://www.erd.epson.com/vdc/html/products.htm>.
+
+config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+ select I2C_ALGOBIT if FB_NVIDIA_I2C
+ select I2C if FB_NVIDIA_I2C
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports graphics boards with the nVidia chips, TNT
+ and newer. For very old chipsets, such as the RIVA128, then use
+ the rivafb.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+ bool "Enable DDC Support"
+ depends on FB_NVIDIA && !PPC_OF
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_RIVA
+ tristate "nVidia Riva support"
+ depends on FB && PCI
+ select I2C_ALGOBIT if FB_RIVA_I2C
+ select I2C if FB_RIVA_I2C
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports graphics boards with the nVidia Riva/Geforce
+ chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rivafb.
+
+config FB_RIVA_I2C
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_RIVA_DEBUG
+ bool "Lots of debug output from Riva(nVidia) driver"
+ depends on FB_RIVA
+ default n
+ help
+ Say Y here if you want the Riva driver to output all sorts
+ of debugging informations to provide to the maintainer when
+ something goes wrong.
+
+config FB_I810
+ tristate "Intel 810/815 support (EXPERIMENTAL)"
+ depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ select AGP
+ select AGP_INTEL
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports the on-board graphics built in to the Intel 810
+ and 815 chipsets. Say Y if you have and plan to use such a board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i810fb.
+
+ For more information, please read
+ <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+ bool "use VESA Generalized Timing Formula"
+ depends on FB_I810
+ help
+ If you say Y, then the VESA standard, Generalized Timing Formula
+ or GTF, will be used to calculate the required video timing values
+ per video mode. Since the GTF allows nondiscrete timings
+ (nondiscrete being a range of values as opposed to discrete being a
+ set of values), you'll be able to use any combination of horizontal
+ and vertical resolutions, and vertical refresh rates without having
+ to specify your own timing parameters. This is especially useful
+ to maximize the performance of an aging display, or if you just
+ have a display with nonstandard dimensions. A VESA compliant
+ monitor is recommended, but can still work with non-compliant ones.
+ If you need or want this, then select this option. The timings may
+ not be compliant with Intel's recommended values. Use at your own
+ risk.
+
+ If you say N, the driver will revert to discrete video timings
+ using a set recommended by Intel in their documentation.
+
+ If unsure, say N.
+
+config FB_INTEL
+ tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
+ depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ select AGP
+ select AGP_INTEL
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports the on-board graphics built in to the Intel
+ 830M/845G/852GM/855GM/865G chipsets.
+ Say Y if you have and plan to use such a board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intelfb.
+
+config FB_INTEL_DEBUG
+ bool "Intel driver Debug Messages"
+ depends on FB_INTEL
+ ---help---
+ Say Y here if you want the Intel driver to output all sorts
+ of debugging informations to provide to the maintainer when
+ something goes wrong.
+
+config FB_MATROX
+ tristate "Matrox acceleration"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_TILEBLITTING
+ select FB_MACMODES if PPC_PMAC
+ ---help---
+ Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+ Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+ Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+ Matrox G400, G450 or G550 card in your box.
+
+ To compile this driver as a module, choose M here: the
+ module will be called matroxfb.
+
+ You can pass several parameters to the driver at boot time or at
+ module load time. The parameters look like "video=matrox:XXX", and
+ are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+ bool "Millennium I/II support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Millennium or Matrox Millennium II
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+ packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+ also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+ bool "Mystique support"
+ depends on FB_MATROX
+ help
+ Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+ video card. If you select "Advanced lowlevel driver options" below,
+ you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+ packed pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+config FB_MATROX_G
+ bool "G100/G200/G400/G450/G550 support"
+ depends on FB_MATROX
+ ---help---
+ Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+ video card. If you select "Advanced lowlevel driver options", you
+ should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+ pixel and 32 bpp packed pixel. You can also use font widths
+ different from 8.
+
+ If you need support for G400 secondary head, you must first say Y to
+ "I2C support" in the character devices section, and then to
+ "Matrox I2C support" and "G400 second head support" here in the
+ framebuffer section. G450/G550 secondary head and digital output
+ are supported without additional modules.
+
+ The driver starts in monitor mode. You must use the matroxset tool
+ (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
+ swap primary and secondary head outputs, or to change output mode.
+ Secondary head driver always start in 640x480 resolution and you
+ must use fbset to change it.
+
+ Do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+ G450/G550 hardware can display TV picture only from secondary CRTC,
+ and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+ tristate "Matrox I2C support"
+ depends on FB_MATROX && I2C
+ select I2C_ALGOBIT
+ ---help---
+ This drivers creates I2C buses which are needed for accessing the
+ DDC (I2C) bus present on all Matroxes, an I2C bus which
+ interconnects Matrox optional devices, like MGA-TVO on G200 and
+ G400, and the secondary head DDC bus, present on G400 only.
+
+ You can say Y or M here if you want to experiment with monitor
+ detection code. You must say Y or M here if you want to use either
+ second head of G400 or MGA-TVO on G200 or G400.
+
+ If you compile it as module, it will create a module named
+ i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+ tristate "G400 second head support"
+ depends on FB_MATROX_G && FB_MATROX_I2C
+ ---help---
+ WARNING !!! This support does not work with G450 !!!
+
+ Say Y or M here if you want to use a secondary head (meaning two
+ monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+ head is not compatible with accelerated XFree 3.3.x SVGA servers -
+ secondary head output is blanked while you are in X. With XFree
+ 3.9.17 preview you can use both heads if you use SVGA over fbdev or
+ the fbdev driver on first head and the fbdev driver on second head.
+
+ If you compile it as module, two modules are created,
+ matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+ both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+ also load i2c-matroxfb to get it to run.
+
+ The driver starts in monitor mode and you must use the matroxset
+ tool (available at
+ <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+ PAL or NTSC or to swap primary and secondary head outputs.
+ Secondary head driver also always start in 640x480 resolution, you
+ must use fbset to change it.
+
+ Also do not forget that second head supports only 16 and 32 bpp
+ packed pixels, so it is a good idea to compile them into the kernel
+ too. You can use only some font widths, as the driver uses generic
+ painting procedures (the secondary head does not use acceleration
+ engine).
+
+config FB_MATROX_MULTIHEAD
+ bool "Multihead support"
+ depends on FB_MATROX
+ ---help---
+ Say Y here if you have more than one (supported) Matrox device in
+ your computer and you want to use all of them for different monitors
+ ("multihead"). If you have only one device, you should say N because
+ the driver compiled with Y is larger and a bit slower, especially on
+ ia32 (ix86).
+
+ If you said M to "Matrox unified accelerated driver" and N here, you
+ will still be able to use several Matrox devices simultaneously:
+ insert several instances of the module matroxfb into the kernel
+ with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
+ for the different Matrox devices. This method is slightly faster but
+ uses 40 KB of kernel memory per Matrox card.
+
+ There is no need for enabling 'Matrox multihead support' if you have
+ only one Matrox card in the box.
+
+config FB_RADEON_OLD
+ tristate "ATI Radeon display support (Old driver)"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
+ help
+ Choose this option if you want to use an ATI Radeon graphics card as
+ a framebuffer device. There are both PCI and AGP versions. You
+ don't need to choose this to run the Radeon in plain VGA mode.
+ There is a product page at
+ <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+
+config FB_RADEON
+ tristate "ATI Radeon display support"
+ depends on FB && PCI
+ select I2C_ALGOBIT if FB_RADEON_I2C
+ select I2C if FB_RADEON_I2C
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC_OF
+ help
+ Choose this option if you want to use an ATI Radeon graphics card as
+ a framebuffer device. There are both PCI and AGP versions. You
+ don't need to choose this to run the Radeon in plain VGA mode.
+
+ If you say Y here and want DDC/I2C support you must first say Y to
+ "I2C support" and "I2C bit-banging support" in the character devices
+ section.
+
+ If you say M here then "I2C support" and "I2C bit-banging support"
+ can be build either as modules or built-in.
+
+ There is a product page at
+ <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+
+config FB_RADEON_I2C
+ bool "DDC/I2C for ATI Radeon support"
+ depends on FB_RADEON
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your Radeon board.
+
+config FB_RADEON_DEBUG
+ bool "Lots of debug output from Radeon driver"
+ depends on FB_RADEON
+ default n
+ help
+ Say Y here if you want the Radeon driver to output all sorts
+ of debugging informations to provide to the maintainer when
+ something goes wrong.
+
+config FB_ATY128
+ tristate "ATI Rage128 display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC_PMAC
+ help
+ This driver supports graphics boards with the ATI Rage128 chips.
+ Say Y if you have such a graphics board and read
+ <file:Documentation/fb/aty128fb.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aty128fb.
+
+config FB_ATY
+ tristate "ATI Mach64 display support" if PCI || ATARI
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
+ help
+ This driver supports graphics boards with the ATI Mach64 chips.
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atyfb.
+
+config FB_ATY_CT
+ bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+ depends on PCI && FB_ATY
+ default y if SPARC64 && FB_PCI
+ help
+ Say Y here to support use of ATI's 64-bit Rage boards (or other
+ boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+ framebuffer device. The ATI product support page for these boards
+ is at <http://support.ati.com/products/pc/mach64/>.
+
+config FB_ATY_GENERIC_LCD
+ bool "Mach64 generic LCD support (EXPERIMENTAL)"
+ depends on FB_ATY_CT
+ help
+ Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+ Rage XC, or Rage XL chipset.
+
+config FB_ATY_XL_INIT
+ bool "Rage XL No-BIOS Init support"
+ depends on FB_ATY_CT
+ help
+ Say Y here to support booting a Rage XL without BIOS support.
+
+config FB_ATY_GX
+ bool "Mach64 GX support" if PCI
+ depends on FB_ATY
+ default y if ATARI
+ help
+ Say Y here to support use of the ATI Mach64 Graphics Expression
+ board (or other boards based on the Mach64 GX chipset) as a
+ framebuffer device. The ATI product support page for these boards
+ is at
+ <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_SAVAGE
+ tristate "S3 Savage support"
+ depends on FB && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT if FB_SAVAGE_I2C
+ select I2C if FB_SAVAGE_I2C
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports notebooks and computers with S3 Savage PCI/AGP
+ chips.
+
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here; the module
+ will be called savagefb.
+
+config FB_SAVAGE_I2C
+ bool "Enable DDC2 Support"
+ depends on FB_SAVAGE
+ help
+ This enables I2C support for S3 Savage Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_SAVAGE_ACCEL
+ bool "Enable Console Acceleration"
+ depends on FB_SAVAGE
+ default n
+ help
+ This option will compile in console acceleration support. If
+ the resulting framebuffer console has bothersome glitches, then
+ choose N here.
+
+config FB_SIS
+ tristate "SiS acceleration"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the SiS 300, 315 and
+ 330 series VGA chipsets. Specs available at <http://www.sis.com>
+
+ To compile this driver as a module, choose M here; the module
+ will be called sisfb.
+
+config FB_SIS_300
+ bool "SiS 300 series support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+ bool "SiS 315/330 series support"
+ depends on FB_SIS
+ help
+ Say Y here to support use of the SiS 315 and 330 series
+ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760).
+
+config FB_NEOMAGIC
+ tristate "NeoMagic display support"
+ depends on FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This driver supports notebooks with NeoMagic PCI chips.
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called neofb.
+
+config FB_KYRO
+ tristate "IMG Kyro support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+ graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kyrofb.
+
+config FB_3DFX
+ tristate "3Dfx Banshee/Voodoo3 display support"
+ depends on FB && PCI
+ select FB_CFB_IMAGEBLIT
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_SOFT_CURSOR
+ help
+ This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
+ chips. Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+ bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+ depends on FB_3DFX && EXPERIMENTAL
+ ---help---
+ This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
+ with acceleration functions.
+
+
+config FB_VOODOO1
+ tristate "3Dfx Voodoo Graphics (sst1) support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
+ Voodoo2 (cvg) based graphics card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sstfb.
+
+ WARNING: Do not use any application that uses the 3D engine
+ (namely glide) while using this driver.
+ Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ options and other important info support.
+
+config FB_TRIDENT
+ tristate "Trident support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ This driver is supposed to support graphics boards with the
+ Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+ but also on some motherboards. For more information, read
+ <file:Documentation/fb/tridentfb.txt>
+
+ Say Y if you have such a graphics board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tridentfb.
+
+config FB_TRIDENT_ACCEL
+ bool "Trident Acceleration functions (EXPERIMENTAL)"
+ depends on FB_TRIDENT && EXPERIMENTAL
+ ---help---
+ This will compile the Trident frame buffer device with
+ acceleration functions.
+
+
+config FB_PM3
+ tristate "Permedia3 support"
+ depends on FB && PCI && BROKEN
+ help
+ This is the frame buffer device driver for the 3DLabs Permedia3
+ chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+ similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+ and maybe other boards.
+
+config FB_E1356
+ tristate "Epson SED1356 framebuffer support"
+ depends on FB && EXPERIMENTAL && PCI && MIPS
+
+config PB1000_CRT
+ bool "Use CRT on Pb1000 (J65)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_NTSC
+ bool "Use Compsite NTSC on Pb1000 (J63)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_TFT
+ bool "Use TFT Panel on Pb1000 (J64)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1500_CRT
+ bool "Use CRT on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_CRT
+ prompt "Use CRT on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config PB1500_TFT
+ bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_TFT
+ prompt "Use TFT Panel on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config FB_AU1100
+ bool "Au1100 LCD Driver"
+ depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+
+source "drivers/video/geode/Kconfig"
+
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && (SPARC32 || SPARC64)
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_PCI
+ bool "PCI framebuffers"
+ depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on SPARC32 && FB_PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_HIT
+ tristate "HD64461 Frame Buffer support"
+ depends on FB && HD64461
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Hitachi HD64461 LCD
+ frame buffer card.
+
+config FB_PMAG_AA
+ bool "PMAG-AA TURBOchannel framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+ bool "PMAG-BA TURBOchannel framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+ used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+ bool "PMAGB-B TURBOchannel framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+ in the MIPS-based DECstation series. The card is currently only
+ supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+ bool "Maxine (Personal DECstation) onboard framebuffer support"
+ depends on (FB = y) && MACH_DECSTATION && TC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Support for the onboard framebuffer (1024x768x8) in the Personal
+ DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+ Codename "Maxine").
+
+config FB_TX3912
+ bool "TMPTX3912/PR31700 frame buffer support"
+ depends on (FB = y) && NINO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
+ see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
+
+ Say Y here to enable kernel support for the on-board framebuffer.
+
+config FB_G364
+ bool
+ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+ Olivetti M700-10 systems.
+
+config FB_68328
+ bool "Motorola 68328 native frame buffer support"
+ depends on FB && (M68328 || M68EZ328 || M68VZ328)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Say Y here if you want to support the built-in frame buffer of
+ the Motorola 68328 CPU family.
+
+config FB_PXA
+ tristate "PXA LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Intel
+ PXA2x0 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && PXA_SHARPSL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config FB_PXA_PARAMETERS
+ bool "PXA LCD command line parameters"
+ default n
+ depends on FB_PXA
+ ---help---
+ Enable the use of kernel command line or module parameters
+ to configure the physical properties of the LCD panel when
+ using the PXA LCD driver.
+
+ This option allows you to override the panel parameters
+ supplied by the platform in order to support multiple
+ different models of flatpanel. If you will only be using a
+ single model of flatpanel then you can safely leave this
+ option disabled.
+
+ <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ Support for S1D13XXX framebuffer device family (currently only
+ working with S1D13806). Product specs at
+ <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+
+config FB_VIRTUAL
+ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ ---help---
+ This is a `virtual' frame buffer device. It operates on a chunk of
+ unswappable kernel memory instead of on the memory of a graphics
+ board. This means you cannot see any output sent to this frame
+ buffer device, while it does consume precious memory. The main use
+ of this frame buffer device is testing and debugging the frame
+ buffer subsystem. Do NOT enable it for normal systems! To protect
+ the innocent, it has to be enabled explicitly at boot time using the
+ kernel option `video=vfb:'.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vfb.
+
+ If unsure, say N.
+if VT
+ source "drivers/video/console/Kconfig"
+endif
+
+if FB || SGI_NEWPORT_CONSOLE
+ source "drivers/video/logo/Kconfig"
+endif
+
+if FB && SYSFS
+ source "drivers/video/backlight/Kconfig"
+endif
+
+endmenu
+